Compatible "rockchip,rk336x-usb-phy" support to RK3368 & RK3366.
Change-Id: I435ecd0a9f1c2a50836f7e3c44b6089ba49d728a
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Add devicetree bindings for Rockchip rk3399 spi which found on
Rockchip rk3399 SoCs.
Change-Id: Ib43ec4ce8970359f660311fce35017843f8998df
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
(cherry picked from git.kernel.org broonie/spi.git for-next
commit 9b7a562215)
this patch add compatible for rk3366/rk3368/rk3399 spdif,
these three spdifs share the same type.
Change-Id: Iac533f3481962556e3ca2b0c4b685b64aec6786a
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
add device tree bindings document for reboot-mode driver
Change-Id: I280e24e8c09e688e4f6dc51b7a1a658347f05db5
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
This patch adds phys and phy-names for sdhci-of-arasan as required
properties for arasan,sdhci-5.1, and details the example as well.
Change-Id: Ia3fc9c6284fc6f557b90fa880c9f2e8d01a4d3c2
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add "rockchip,rk3399-dw-mshc", "rockchip,rk3288-dw-mshc" for
dwmmc on rk3399 platform.
Change-Id: Ieefafab5f0e9650271e823659e2bec1556c4a9bc
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
The drive strength control of rk3366 is very different from others'.
RK3366 soc adds N and P channel drive strength control, and we assume
they are the same value.
Change-Id: I45896f1483cb0a7550789df3bf84a0460cb21527
Signed-off-by: David Wu <david.wu@rock-chips.com>
This patch adds a binding that describes the Rockchip eMMC PHYs
found on Rockchip SoCs eMMC interface.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
(cherry picked from git.kernel.org kishon/linux-phy next
commit c9a1ddcac5b95a9dbf3d3f71d3be8b157239cce5)
Change-Id: I6913babddbc70c1ad3ea2234d8afac79190852a4
The USB phys on Rockchip SoCs contain their own internal PLLs to create
the 480MHz needed. Additionally this PLL output is also fed back into the
core clock-controller as possible source for clocks like the GPU or others.
Until now this was modelled incorrectly with a "virtual" factor clock in
the clock controller. The one big caveat is that if we turn off the usb phy
via the siddq signal, all analog components get turned off, including the
PLLs. It is therefore possible that a source clock gets disabled without
the clock driver ever knowing, possibly making the system hang.
Therefore register the phy-plls as real clocks that the clock driver can
then reference again normally, making the clock hirarchy finally reflect
the actual hardware.
The phy-ops get converted to simply turning that new clock on and off
which in turn controls the siddq signal of the phy.
Through this the driver gains handling for platform-specific data, to
handle the phy->clock name association.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
(cherry picked from commit b74fe7c761)
Change-Id: Ie05464a9523af86b602d4801cb9b842f65d08670
We need custom handling for these two socs in the driver shortly,
so add the necessary compatible values to binding and driver.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
(cherry picked from commit c2bfc3b888)
Change-Id: I63cf61e12b1f3bb56856accc38949c6cd8c0ce8e
Modify binding documentation for the power domains
found on Rockchip RK3366 SoCs.
Change-Id: Ib9cd07971303b1205f501a06430811e877870212
Signed-off-by: Xiao Feng <xf@rock-chips.com>
enable/disable master clock when codec is active or not.
Change-Id: Ia876abde08138c4f23ed5a1a684f6637c42d5e34
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
(cherry picked from commit https://lkml.org/lkml/2015/12/21/337)
ASLR only uses as few as 8 bits to generate the random offset for the
mmap base address on 32 bit architectures. This value was chosen to
prevent a poorly chosen value from dividing the address space in such
a way as to prevent large allocations. This may not be an issue on all
platforms. Allow the specification of a minimum number of bits so that
platforms desiring greater ASLR protection may determine where to place
the trade-off.
Bug: 24047224
Signed-off-by: Daniel Cashman <dcashman@android.com>
Signed-off-by: Daniel Cashman <dcashman@google.com>
Change-Id: Ibf9ed3d4390e9686f5cc34f605d509a20d40e6c2
Userspace processes often have multiple allocators that each do
anonymous mmaps to get memory. When examining memory usage of
individual processes or systems as a whole, it is useful to be
able to break down the various heaps that were allocated by
each layer and examine their size, RSS, and physical memory
usage.
This patch adds a user pointer to the shared union in
vm_area_struct that points to a null terminated string inside
the user process containing a name for the vma. vmas that
point to the same address will be merged, but vmas that
point to equivalent strings at different addresses will
not be merged.
Userspace can set the name for a region of memory by calling
prctl(PR_SET_VMA, PR_SET_VMA_ANON_NAME, start, len, (unsigned long)name);
Setting the name to NULL clears it.
The names of named anonymous vmas are shown in /proc/pid/maps
as [anon:<name>] and in /proc/pid/smaps in a new "Name" field
that is only present for named vmas. If the userspace pointer
is no longer valid all or part of the name will be replaced
with "<fault>".
The idea to store a userspace pointer to reduce the complexity
within mm (at the expense of the complexity of reading
/proc/pid/mem) came from Dave Hansen. This results in no
runtime overhead in the mm subsystem other than comparing
the anon_name pointers when considering vma merging. The pointer
is stored in a union with fieds that are only used on file-backed
mappings, so it does not increase memory usage.
Includes fix from Jed Davis <jld@mozilla.com> for typo in
prctl_set_vma_anon_name, which could attempt to set the name
across two vmas at the same time due to a typo, which might
corrupt the vma list. Fix it to use tmp instead of end to limit
the name setting to a single vma at a time.
Change-Id: I9aa7b6b5ef536cd780599ba4e2fba8ceebe8b59f
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
Add a userspace visible knob to tell the VM to keep an extra amount
of memory free, by increasing the gap between each zone's min and
low watermarks.
This is useful for realtime applications that call system
calls and have a bound on the number of allocations that happen
in any short time period. In this application, extra_free_kbytes
would be left at an amount equal to or larger than than the
maximum number of allocations that happen in any burst.
It may also be useful to reduce the memory use of virtual
machines (temporarily?), in a way that does not cause memory
fragmentation like ballooning does.
[ccross]
Revived for use on old kernels where no other solution exists.
The tunable will be removed on kernels that do better at avoiding
direct reclaim.
Change-Id: I765a42be8e964bfd3e2886d1ca85a29d60c3bb3e
Signed-off-by: Rik van Riel<riel@redhat.com>
Signed-off-by: Colin Cross <ccross@android.com>
ramoops is one of the remaining places where ARM vendors still rely on
board-specific shims. Device Tree lets us replace those shims with
generic code.
These bindings mirror the ramoops module parameters, with two small
differences:
(1) dump_oops becomes an optional "no-dump-oops" property, since ramoops
sets dump_oops=1 by default.
(2) mem_type=1 becomes the more self-explanatory "unbuffered" property.
(am from https://lkml.org/lkml/2016/1/7/750)
Change-Id: I2140199a861d50fc2bcbbe85b16bf17fb9ccaa1d
Signed-off-by: Greg Hackmann <ghackmann@google.com>
Update Documentation/android.txt to reference PSTORE_CONSOLE
and PSTORE_RAM instead of ANDROID_RAM_CONSOLE
Change-Id: I2c56e73f8c65c3ddbe6ddbf1faadfacb42a09575
Reported-by: Jon Medhurst (Tixy) <tixy@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Rather than using explicit euid == 0 checks when trying to move
tasks into a cgroup via CFS, move permission checks into each
specific cgroup subsystem. If a subsystem does not specify a
'allow_attach' handler, then we fall back to doing our checks
the old way.
Use the 'allow_attach' handler for the 'cpu' cgroup to allow
non-root processes to add arbitrary processes to a 'cpu' cgroup
if it has the CAP_SYS_NICE capability set.
This version of the patch adds a 'allow_attach' handler instead
of reusing the 'can_attach' handler. If the 'can_attach' handler
is reused, a new cgroup that implements 'can_attach' but not
the permission checks could end up with no permission checks
at all.
Change-Id: Icfa950aa9321d1ceba362061d32dc7dfa2c64f0c
Original-Author: San Mehat <san@google.com>
Signed-off-by: Colin Cross <ccross@android.com>
This node epxorts two values separated by space.
From left to right:
1. time spent in suspend/resume process
2. time spent sleep in suspend state
Change-Id: I2cb9a9408a5fd12166aaec11b935a0fd6a408c63
Add the 'funcgraph-flat' option to the function_graph tracer to use the default
trace printing format rather than the hierarchical formatting normally used.
Change-Id: If2900bfb86e6f8f51379f56da4f6fabafa630909
Signed-off-by: Jamie Gennis <jgennis@google.com>
Accept a string of delays and speeds at which to apply the delay before
raising each step above hispeed. For example, "80000 1300000:200000
1500000:40000" means that the delay at or above 1GHz, until 1.3GHz is 80 msecs,
the delay until 1.5GHz is 200 msecs and the delay at or above 1.5GHz is 40
msecs when hispeed_freq is 1GHz.
[toddpoynor@google.com: add documentation]
Change-Id: Ifeebede8b1acbdd0a53e5c6916bccbf764dc854f
Signed-off-by: Minsung Kim <ms925.kim@samsung.com>
Update default go_hispeed_load from 85% to 99%. Recent changes to the
governor now use a default target_load of 90%. go_hispeed_load should
not be lower than the target load for hispeed_freq, which could lead
to oscillating speed decisions. Other recent changes reduce the need
to dampen speed jumps on load spikes, while input event boosts from
userspace are the preferred method for anticipating load spikes with
UI impacts.
General update to the documentation to reflect recent changes.
Change-Id: I1b92f3091f42c04b10503cd1169a943b5dfd6faf
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Accept a string of target loads and speeds at which to apply the
target loads, per the documentation update in this patch. For example,
"85 1000000:90 1700000:99" targets CPU load 85% below speed 1GHz, 90%
at or above 1GHz, until 1.7GHz and above, at which load 99% is targeted.
Attempt to avoid oscillations by evaluating the current speed
weighted by current load against each new choice of speed, choosing a
higher speed if the current load requires a higher speed.
Change-Id: Ie3300206047c84eca5a26b0b63ea512e5207550e
Signed-off-by: Todd Poynor <toddpoynor@google.com>
This governor is designed for latency-sensitive workloads, such as
interactive user interfaces. The interactive governor aims to be
significantly more responsive to ramp CPU quickly up when CPU-intensive
activity begins.
Existing governors sample CPU load at a particular rate, typically
every X ms. This can lead to under-powering UI threads for the period of
time during which the user begins interacting with a previously-idle system
until the next sample period happens.
The 'interactive' governor uses a different approach. Instead of sampling
the CPU at a specified rate, the governor will check whether to scale the
CPU frequency up soon after coming out of idle. When the CPU comes out of
idle, a timer is configured to fire within 1-2 ticks. If the CPU is very
busy from exiting idle to when the timer fires then we assume the CPU is
underpowered and ramp to MAX speed.
If the CPU was not sufficiently busy to immediately ramp to MAX speed, then
the governor evaluates the CPU load since the last speed adjustment,
choosing the highest value between that longer-term load or the short-term
load since idle exit to determine the CPU speed to ramp to.
A realtime thread is used for scaling up, giving the remaining tasks the
CPU performance benefit, unlike existing governors which are more likely to
schedule rampup work to occur after your performance starved tasks have
completed.
The tuneables for this governor are:
/sys/devices/system/cpu/cpufreq/interactive/min_sample_time:
The minimum amount of time to spend at the current frequency before
ramping down. This is to ensure that the governor has seen enough
historic CPU load data to determine the appropriate workload.
Default is 80000 uS.
/sys/devices/system/cpu/cpufreq/interactive/go_maxspeed_load
The CPU load at which to ramp to max speed. Default is 85.
Change-Id: Ib2b362607c62f7c56d35f44a9ef3280f98c17585
Signed-off-by: Mike Chan <mike@android.com>
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Bug: 3152864
This CL adds a new class to monitor and change
dual role usb ports from userspace. The usb
phy drivers can register to the dual_role_usb
class and expose the capabilities of the ports.
The phy drivers can decide on whether a specific
attribute can be changed from userspace by
choosing to implement the appropriate callback.
Cherry-picked from
https://android-review.googlesource.com/#/c/167310/
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Bug: 21615151
Change-Id: Id1c4aaa97e898264d7006381a7badd029b5d9789
When using mark-based routing, sockets returned from accept()
may need to be marked differently depending on the incoming
connection request.
This is the case, for example, if different socket marks identify
different networks: a listening socket may want to accept
connections from all networks, but each connection should be
marked with the network that the request came in on, so that
subsequent packets are sent on the correct network.
This patch adds a sysctl to mark TCP sockets based on the fwmark
of the incoming SYN packet. If enabled, and an unmarked socket
receives a SYN, then the SYN packet's fwmark is written to the
connection's inet_request_sock, and later written back to the
accepted socket when the connection is established. If the
socket already has a nonzero mark, then the behaviour is the same
as it is today, i.e., the listening socket's fwmark is used.
Black-box tested using user-mode linux:
- IPv4/IPv6 SYN+ACK, FIN, etc. packets are routed based on the
mark of the incoming SYN packet.
- The socket returned by accept() is marked with the mark of the
incoming SYN packet.
- Tested with syncookies=1 and syncookies=2.
Change-Id: I26bc1eceefd2c588d73b921865ab70e4645ade57
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
The pinctrl of rk3399 is much different from other's,
especially the 3bits of drive strength.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
(cherry picked from git.kernel.org linusw/linux-pinctrl for-next
commit b6c2327577)
Change-Id: I6d0260256f8cf742f940770b317b26571bf42023
The pinctrl of rk3228 is much the same as rk3288's, but
without pmu.
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
(cherry picked from commit fea0fe6052)
Change-Id: I68a5881ed8daf45f62ccee911d83a52e3362a25a
Also, sort the properties alphabetically and make indentation
consistent. Wording largely taken from i2c-rk3x.txt, thanks guys!
Only "i2c-scl-internal-delay-ns" is new, the rest is used by two drivers
already and was documented in their driver binding documentation.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
(cherry picked from commit 99b809d7bd)
Change-Id: I7f60b372e5ec2425ef6976306a7e26a1437f0384
commit bf5ce5bf3c upstream.
Commit 655fe4effe ("usbcore: add sysfs support to xHCI usb3
hardware LPM") introduced usb3_hardware_lpm sysfs node. This
doesn't show the correct status of USB3 U1 and U2 LPM status.
This patch fixes this by replacing usb3_hardware_lpm with two
nodes, usb3_hardware_lpm_u1 (for U1) and usb3_hardware_lpm_u2
(for U2), and recording the U1/U2 LPM status in right places.
This patch should be back-ported to kernels as old as 4.3,
that contains Commit 655fe4effe ("usbcore: add sysfs support
to xHCI usb3 hardware LPM").
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patchset attempts to new compatible for thermal founding
on RK3228/RK3399 SoCs.
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
(cherry picked from git.kernel.org torvalds/linux.git master
commit 4be02530fc)
Change-Id: I9fd1f52d7b4781230e5436e90ed6d9d2c95d06cb
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Add the devicetree binding for the cru on the rk3366 which quite
similar structured as previous clock controllers.
Change-Id: I109da26f88cd733b64d4c4339db63346dd9ffea6
Signed-off-by: Xiao Feng <xf@rock-chips.com>
With the RK3399 FPGA dts file, the FPGA board is able to boot with
very simple boot system.
Change-Id: I3484faf02cf9e6adab4379752abcc6cb8c9ed5b2
Signed-off-by: Xu Jianqun <jay.xu@rock-chips.com>
Add device tree bindings documentation and a header file
for rockchip's RK818 pmic
Change-Id: Ic021c3555e980fa7f083b0720ab43ba757d032e4
Signed-off-by: Shenfei xu <xsf@rock-chips.com>
Add the devicetree binding for the cru on the rk3399 which quite
similar structured as previous clock controllers.
Change-Id: I726011854d84312c5b831612246ad0decf317d68
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
