- Split DT source files to separate out android firmware specific DT
bindings
- Add an alias for firmware_android in rk3399-android.dtsi
Change-Id: If3ae952c61ff01903ea990c6430255af27f5a432
Signed-off-by: Guochun Huang <hero.huang@rock-chips.com>
The ramdisk name should be ramdisk.img.
The ramdisk.img should be placed on $(objtree).
Support symbolic link.
Change-Id: Iee78c437bf8291362adf9598578d69de6d6abab6
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
1. disabled bq25700 node
2. add type-c1/host0/host1 support
Change-Id: If245dd187640674c407cc8ed5e0de3b8c19d93e5
Signed-off-by: Bin Yang <yangbin@rock-chips.com>
It supports both tcs4525 and tcs4526 chip. The tcs4525
i2c addr is 0x1c and tcs4526 i2c addr is 0x10.
Change-Id: I01cf8384032b2c805b8a55fa6686ca98ea2355e0
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
PPLL 100M use refdiv =1 fbdiv = 150, postdiv1= 6,
postdiv2=6, vco= 3.6G, is best for pcie.
Change-Id: I40eb1a71c5025a68cab65ec56d2c2a7725d30c63
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
This patch fixes the following warning:
drivers/i2c/busses/i2c-rk3x.c:1136 rk3x_i2c_xfer() error: uninitialized symbol 'timeout'.
Fixes: d5635ca05b ("i2c: rk3x: Disable irq after i2c transfer finished")
Change-Id: I7618ae660a62e8e3fc5b7b5d00cff1264bd18663
Signed-off-by: David Wu <david.wu@rock-chips.com>
The system tick may be modified by NTP when we connect
with network, then jiffies have an offset compared to
the local clock, it will cause the irq_pos / delta_play /
delta_capt also be inaccurate.
Therefore, we need a way to get raw jiffies which follows
local raw clocks.
Change-Id: I9be1790dfd98e430982dad6f03b04532889279a6
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
It's found a new r8169 ethernet card with a device ID of
0x0000 read from its config header which wasn't in the
ID tables of r8169. Add it in order to probe this card.
Change-Id: I27c542a10cc571a6e1a4e7a8af62ce560b8b1fc4
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
The DWC3 with Innosilicon USB 3.0 PHY on Rockchip platforms
(e.g. rk3328, rk1808) has problem to exit to U0 state from
U1 or U2 state when DWC3 work as peripheral mode. This patch
adds a quirk to reject transition to U1 and U2 state to
workaround this issue.
Change-Id: Ib5a7a603193df23e4d274681bad155d005238349
Signed-off-by: William Wu <william.wu@rock-chips.com>
This patch adds a quirk for some special platforms (e.g.
rk1808 platform) which has problem to exit to U0 state
from U1 or U2 state when dwc3 work as peripheral mode.
To workaround this issue, we can add this quirk to reject
transition to U1 and U2 state.
Change-Id: I611b3562800e77079193cd5e96f6fe30bb3ca88a
Signed-off-by: William Wu <william.wu@rock-chips.com>
This patch fix the aloop card index to 7, and leave the card 0
place for default hw snd card.
Change-Id: I767d3d61b1ecb09b813d7bf81b99298cd30a3969
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
This patch make the waterlevel more reasonable, because the pdm
controller share the single FIFO(128 entries) with each channel.
adjust waterlevel in frame to meet the vad or dma frames request.
Change-Id: I9b5808e55025347d435f47889f39ba34ac07ea1c
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
fix the vts error like this:
Failed to parse! Parsing error at token LexToken(COMMA,',',1,48) in line 1;
explain:
the vts will parsing the codec'name after android P, the comma is not allow
in the codec'name
Change-Id: I6cb011331368d64417bd9955ba5d3deb84d49b8d
Signed-off-by: Xinhuang Li <buluess.li@rock-chips.com>
On rk3399 platforms, Type-c1 can be simplified to Type-A
port and support USB 3.0 Host only mode. It has a problem
that the dwc3_rockchip_resume() will reset the controller
upon pm resume, and this may cause usb device(e.g. usb 4G
modem) to be reenumerated. This patch sets the flag of
connected to true and avoid to do the reset operation upon
pm resume.
Change-Id: I57f92d0277a19ce1c7b881fe2da6470fd3a70b73
Signed-off-by: William Wu <william.wu@rock-chips.com>
