[ Upstream commit f4f84ff837 ]
Sometimes the TX queue may be empty and we could possible
dequeue a NULL pointer, crash the kernel. If the skb is NULL
then there is nothing to do, just leave the ISR.
And the TX queue should not be empty here, so print an error
to see if there is anything wrong for DMA ring.
Fixes: e3037485c6 ("rtw88: new Realtek 802.11ac driver")
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b61156fba7 ]
Clang warns:
../drivers/net/wireless/intersil/hostap/hostap_ap.c:2511:3: warning:
misleading indentation; statement is not part of the previous 'if'
[-Wmisleading-indentation]
if (sta->tx_supp_rates & WLAN_RATE_5M5)
^
../drivers/net/wireless/intersil/hostap/hostap_ap.c:2509:2: note:
previous statement is here
if (sta->tx_supp_rates & WLAN_RATE_2M)
^
1 warning generated.
This warning occurs because there is a space before the tab on this
line. Remove it so that the indentation is consistent with the Linux
kernel coding style and clang no longer warns.
Fixes: ff1d2767d5 ("Add HostAP wireless driver.")
Link: https://github.com/ClangBuiltLinux/linux/issues/813
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 76950f7162 ]
To perform the reserve_crashkernel() operation kexec uses SECTION_SIZE to
find a memblock in a range.
SECTION_SIZE is not defined for nommu systems. Trying to compile kexec in
these conditions results in a build error:
linux/arch/arm/kernel/setup.c: In function ‘reserve_crashkernel’:
linux/arch/arm/kernel/setup.c:1016:25: error: ‘SECTION_SIZE’ undeclared
(first use in this function); did you mean ‘SECTIONS_WIDTH’?
crash_size, SECTION_SIZE);
^~~~~~~~~~~~
SECTIONS_WIDTH
linux/arch/arm/kernel/setup.c:1016:25: note: each undeclared identifier
is reported only once for each function it appears in
linux/scripts/Makefile.build:265: recipe for target 'arch/arm/kernel/setup.o'
failed
Make KEXEC depend on MMU to fix the compilation issue.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 414f50434a ]
Some newer cards supported by aacraid can take up to 40s to recover
after an EEH event. This causes spurious failures in the basic EEH
self-test since the current maximim timeout is only 30s.
Fix the immediate issue by bumping the timeout to a default of 60s,
and allow the wait time to be specified via an environmental variable
(EEH_MAX_WAIT).
Reported-by: Steve Best <sbest@redhat.com>
Suggested-by: Douglas Miller <dougmill@us.ibm.com>
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200122031125.25991-1-oohall@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0e98c084a2 ]
Commit fb7c02445c ("ext4: pass -ESHUTDOWN code to jbd2 layer") want
to allow jbd2 layer to distinguish shutdown journal abort from other
error cases. So the ESHUTDOWN should be taken precedence over any other
errno which has already been recoded after EXT4_FLAGS_SHUTDOWN is set,
but it only update errno in the journal suoerblock now if the old errno
is 0.
Fixes: fb7c02445c ("ext4: pass -ESHUTDOWN code to jbd2 layer")
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191204124614.45424-4-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d0a186e0d3 ]
We invoke jbd2_journal_abort() to abort the journal and record errno
in the jbd2 superblock when committing journal transaction besides the
failure on submitting the commit record. But there is no need for the
case and we can also invoke jbd2_journal_abort() instead of
__jbd2_journal_abort_hard().
Fixes: 818d276ceb ("ext4: Add the journal checksum feature")
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191204124614.45424-2-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c79108bd19 ]
The alarmtimer_suspend() function will fail if an RTC device is on a bus
such as SPI or i2c and that RTC device registers and probes after
alarmtimer_init() registers and probes the 'alarmtimer' platform device.
This is because system wide suspend suspends devices in the reverse order
of their probe. When alarmtimer_suspend() attempts to program the RTC for a
wakeup it will try to program an RTC device on a bus that has already been
suspended.
Move the alarmtimer device registration to happen when the RTC which is
used for wakeup is registered. Register the 'alarmtimer' platform device as
a child of the RTC device too, so that it can be guaranteed that the RTC
device won't be suspended when alarmtimer_suspend() is called.
Reported-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200124055849.154411-2-swboyd@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 857f081426 ]
Address field in device TLB invalidation descriptor is qualified
by the S field. If S field is zero, a single page at page address
specified by address [63:12] is requested to be invalidated. If S
field is set, the least significant bit in the address field with
value 0b (say bit N) indicates the invalidation address range. The
spec doesn't require the address [N - 1, 0] to be cleared, hence
remove the unnecessary WARN_ON_ONCE().
Otherwise, the caller might set "mask = MAX_AGAW_PFN_WIDTH" in order
to invalidating all the cached mappings on an endpoint, and below
overflow error will be triggered.
[...]
UBSAN: Undefined behaviour in drivers/iommu/dmar.c:1354:3
shift exponent 64 is too large for 64-bit type 'long long unsigned int'
[...]
Reported-and-tested-by: Frank <fgndev@posteo.de>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ae3cd29991 ]
The patch "bcache: rework error unwinding in register_bcache" introduces
a use-after-free regression in register_bcache(). Here are current code,
2510 out_free_path:
2511 kfree(path);
2512 out_module_put:
2513 module_put(THIS_MODULE);
2514 out:
2515 pr_info("error %s: %s", path, err);
2516 return ret;
If some error happens and the above code path is executed, at line 2511
path is released, but referenced at line 2515. Then KASAN reports a use-
after-free error message.
This patch changes line 2515 in the following way to fix the problem,
2515 pr_info("error %s: %s", path?path:"", err);
Signed-off-by: Coly Li <colyli@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 50246693f8 ]
Split the successful and error return path, and use one goto label for each
resource to unwind. This also fixes some small errors like leaking the
module reference count in the reboot case (which seems entirely harmless)
or printing the wrong warning messages for early failures.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8547d4209 ]
Same as cache device, the buffer page needs to be put while
freeing cached_dev. Otherwise a page would be leaked every
time a cached_dev is stopped.
Signed-off-by: Liang Chen <liangchen.linux@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1362089d2a ]
Current code doesn't correctly handle the situation which arises when
a file system that has METADATA_UUID_INCOMPAT flag set and has its FSID
changed to the one in metadata uuid. This causes the incompat flag to
disappear.
In case of a power failure we could end up in a situation where part of
the disks in a multi-disk filesystem are correctly reverted to
METADATA_UUID_INCOMPAT flag unset state, while others have
METADATA_UUID_INCOMPAT set and CHANGING_FSID_V2_IN_PROGRESS.
This patch corrects the behavior required to handle the case where a
disk of the second type is scanned first, creating the necessary
btrfs_fs_devices. Subsequently, when a disk which has already completed
the transition is scanned it should overwrite the data in
btrfs_fs_devices.
Reported-by: Su Yue <Damenly_Su@gmx.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 68c467cbb2 ]
There's a report where objtool detects unreachable instructions, eg.:
fs/btrfs/ctree.o: warning: objtool: btrfs_search_slot()+0x2d4: unreachable instruction
This seems to be a false positive due to compiler version. The cause is
in the ASSERT macro implementation that does the conditional check as
IS_DEFINED(CONFIG_BTRFS_ASSERT) and not an #ifdef.
To avoid that, use the ifdefs directly.
There are still 2 reports that aren't fixed:
fs/btrfs/extent_io.o: warning: objtool: __set_extent_bit()+0x71f: unreachable instruction
fs/btrfs/relocation.o: warning: objtool: find_data_references()+0x4e0: unreachable instruction
Co-developed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1dd2e8f942 ]
This device does not function correctly in raw mode in kernel
versions validating buffer sizes in bulk mode. It erroneously
announces 16 bits per pixel instead of 12 for NV12 format, so it
needs this quirk to fix computed frame size and avoid legitimate
frames getting discarded.
[Move info and div variables to local scope]
Signed-off-by: Sergey Zakharchenko <szakharchenko@digital-loggers.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1fb4124ca9 ]
When disabling virtual functions on an SR-IOV adapter we currently do not
correctly remove the EEH state for the now-dead virtual functions. When
removing the pci_dn that was created for the VF when SR-IOV was enabled
we free the corresponding eeh_dev without removing it from the child device
list of the eeh_pe that contained it. This can result in crashes due to the
use-after-free.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Sam Bobroff <sbobroff@linux.ibm.com>
Tested-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190821062655.19735-1-oohall@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2a67a6ccb0 ]
When trying to compile with CONFIG_DEBUG_INFO_BTF enabled, I got this
error:
% make -s
Failed to generate BTF for vmlinux
Try to disable CONFIG_DEBUG_INFO_BTF
make[3]: *** [vmlinux] Error 1
Compiling again without -s shows the true error (that pahole is
missing), but since this is fatal, we should show the error
unconditionally on stderr as well, not silence it using the `info`
function. With this patch:
% make -s
BTF: .tmp_vmlinux.btf: pahole (pahole) is not available
Failed to generate BTF for vmlinux
Try to disable CONFIG_DEBUG_INFO_BTF
make[3]: *** [vmlinux] Error 1
Signed-off-by: Chris Down <chris@chrisdown.name>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200122000110.GA310073@chrisdown.name
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 45f7a0da60 ]
Currently backtrace from ftraced function does not contain ftraced
function itself. e.g. for "path_openat":
arch_stack_walk+0x15c/0x2d8
stack_trace_save+0x50/0x68
stack_trace_call+0x15e/0x3d8
ftrace_graph_caller+0x0/0x1c <-- ftrace code
do_filp_open+0x7c/0xe8 <-- ftraced function caller
do_open_execat+0x76/0x1b8
open_exec+0x52/0x78
load_elf_binary+0x180/0x1160
search_binary_handler+0x8e/0x288
load_script+0x2a8/0x2b8
search_binary_handler+0x8e/0x288
__do_execve_file.isra.39+0x6fa/0xb40
__s390x_sys_execve+0x56/0x68
system_call+0xdc/0x2d8
Ftraced function is expected in the backtrace by ftrace kselftests, which
are now failing. It would also be nice to have it for clarity reasons.
"ftrace_caller" itself is called without stack frame allocated for it
and does not store its caller (ftraced function). Instead it simply
allocates a stack frame for "ftrace_trace_function" and sets backchain
to point to ftraced function stack frame (which contains ftraced function
caller in saved r14).
To fix this issue make "ftrace_caller" allocate a stack frame
for itself just to store ftraced function for the stack unwinder.
As a result backtrace looks like the following:
arch_stack_walk+0x15c/0x2d8
stack_trace_save+0x50/0x68
stack_trace_call+0x15e/0x3d8
ftrace_graph_caller+0x0/0x1c <-- ftrace code
path_openat+0x6/0xd60 <-- ftraced function
do_filp_open+0x7c/0xe8 <-- ftraced function caller
do_open_execat+0x76/0x1b8
open_exec+0x52/0x78
load_elf_binary+0x180/0x1160
search_binary_handler+0x8e/0x288
load_script+0x2a8/0x2b8
search_binary_handler+0x8e/0x288
__do_execve_file.isra.39+0x6fa/0xb40
__s390x_sys_execve+0x56/0x68
system_call+0xdc/0x2d8
Reported-by: Sven Schnelle <sven.schnelle@ibm.com>
Tested-by: Sven Schnelle <sven.schnelle@ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 253b3c4b29 ]
clang 10 introduces -mpacked-stack compiler option implementation. At the
same time currently it does not support a combination of -mpacked-stack
and -mbackchain. This leads to the following build error:
clang: error: unsupported option '-mpacked-stack with -mbackchain' for
target 's390x-ibm-linux'
If/when clang adds support for a combination of -mpacked-stack and
-mbackchain it would also require -msoft-float (like gcc does). According
to Ulrich Weigand "stack slot assigned to the kernel backchain overlaps
the stack slot assigned to the FPR varargs (both are required to be
placed immediately after the saved r15 slot if present)."
Extend -mpacked-stack compiler option support check to include all 3
options -mpacked-stack -mbackchain -msoft-float which must present to
support -mpacked-stack with -mbackchain.
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8b7e20a7ba ]
Add TEST opcode to Group3-2 reg=001b as same as Group3-1 does.
Commit
12a78d43de ("x86/decoder: Add new TEST instruction pattern")
added a TEST opcode assignment to f6 XX/001/XXX (Group 3-1), but did
not add f7 XX/001/XXX (Group 3-2).
Actually, this TEST opcode variant (ModRM.reg /1) is not described in
the Intel SDM Vol2 but in AMD64 Architecture Programmer's Manual Vol.3,
Appendix A.2 Table A-6. ModRM.reg Extensions for the Primary Opcode Map.
Without this fix, Randy found a warning by insn_decoder_test related
to this issue as below.
HOSTCC arch/x86/tools/insn_decoder_test
HOSTCC arch/x86/tools/insn_sanity
TEST posttest
arch/x86/tools/insn_decoder_test: warning: Found an x86 instruction decoder bug, please report this.
arch/x86/tools/insn_decoder_test: warning: ffffffff81000bf1: f7 0b 00 01 08 00 testl $0x80100,(%rbx)
arch/x86/tools/insn_decoder_test: warning: objdump says 6 bytes, but insn_get_length() says 2
arch/x86/tools/insn_decoder_test: warning: Decoded and checked 11913894 instructions with 1 failures
TEST posttest
arch/x86/tools/insn_sanity: Success: decoded and checked 1000000 random instructions with 0 errors (seed:0x871ce29c)
To fix this error, add the TEST opcode according to AMD64 APM Vol.3.
[ bp: Massage commit message. ]
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lkml.kernel.org/r/157966631413.9580.10311036595431878351.stgit@devnote2
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8580bed7e7 ]
Building objtool with ARCH=x86_64 fails with:
$make ARCH=x86_64 -C tools/objtool
...
CC arch/x86/decode.o
arch/x86/decode.c:10:22: fatal error: asm/insn.h: No such file or directory
#include <asm/insn.h>
^
compilation terminated.
mv: cannot stat ‘arch/x86/.decode.o.tmp’: No such file or directory
make[2]: *** [arch/x86/decode.o] Error 1
...
The root cause is that the command-line variable 'ARCH' cannot be
overridden. It can be replaced by 'SRCARCH', which is defined in
'tools/scripts/Makefile.arch'.
Signed-off-by: Shile Zhang <shile.zhang@linux.alibaba.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/d5d11370ae116df6c653493acd300ec3d7f5e925.1579543924.git.jpoimboe@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3bed1b7b9d ]
Currently, -E (stop after the preprocessing stage) is used to check
whether the given compiler flag is supported.
While it is faster than -S (or -c), it can be false-positive. You need
to run the compilation proper to check the flag more precisely.
For example, -E and -S disagree about the support of
"--param asan-instrument-allocas=1".
$ gcc -Werror --param asan-instrument-allocas=1 -E -x c /dev/null -o /dev/null
$ echo $?
0
$ gcc -Werror --param asan-instrument-allocas=1 -S -x c /dev/null -o /dev/null
cc1: error: invalid --param name ‘asan-instrument-allocas’; did you mean ‘asan-instrument-writes’?
$ echo $?
1
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b0177aca7a ]
Make use of a core helper to ensure the desired width is respected
when calling spi-mem operators.
Otherwise only the SPI controller will be matched with the flash chip,
which might lead to wrong widths. Also consider the width specified by
the user in the device tree.
Fixes: 84d043185d ("spi: Add a driver for the Freescale/NXP QuadSPI controller")
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20200114154613.8195-1-michael@walle.cc
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d6152e6ec9 ]
The following crash can be seen for setting
CONFIG_DEBUG_TEST_DRIVER_REMOVE=y for DT FW (which some people still use):
Hisilicon MBIGEN-V2 60080000.interrupt-controller: Failed to create mbi-gen irqdomain
Hisilicon MBIGEN-V2: probe of 60080000.interrupt-controller failed with error -12
[...]
Unable to handle kernel paging request at virtual address 0000000000005008
Mem abort info:
ESR = 0x96000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000004
CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=0000041fb9990000
[0000000000005008] pgd=0000000000000000
Internal error: Oops: 96000004 [#1] PREEMPT SMP
Modules linked in:
CPU: 7 PID: 1 Comm: swapper/0 Not tainted 5.5.0-rc6-00002-g3fc42638a506-dirty #1622
Hardware name: Huawei Taishan 2280 /D05, BIOS Hisilicon D05 IT21 Nemo 2.0 RC0 04/18/2018
pstate: 40000085 (nZcv daIf -PAN -UAO)
pc : mbigen_set_type+0x38/0x60
lr : __irq_set_trigger+0x6c/0x188
sp : ffff800014b4b400
x29: ffff800014b4b400 x28: 0000000000000007
x27: 0000000000000000 x26: 0000000000000000
x25: ffff041fd83bd0d4 x24: ffff041fd83bd188
x23: 0000000000000000 x22: ffff80001193ce00
x21: 0000000000000004 x20: 0000000000000000
x19: ffff041fd83bd000 x18: ffffffffffffffff
x17: 0000000000000000 x16: 0000000000000000
x15: ffff8000119098c8 x14: ffff041fb94ec91c
x13: ffff041fb94ec1a1 x12: 0000000000000030
x11: 0101010101010101 x10: 0000000000000040
x9 : 0000000000000000 x8 : ffff041fb98c6680
x7 : ffff800014b4b380 x6 : ffff041fd81636c8
x5 : 0000000000000000 x4 : 000000000000025f
x3 : 0000000000005000 x2 : 0000000000005008
x1 : 0000000000000004 x0 : 0000000080000000
Call trace:
mbigen_set_type+0x38/0x60
__setup_irq+0x744/0x900
request_threaded_irq+0xe0/0x198
pcie_pme_probe+0x98/0x118
pcie_port_probe_service+0x38/0x78
really_probe+0xa0/0x3e0
driver_probe_device+0x58/0x100
__device_attach_driver+0x90/0xb0
bus_for_each_drv+0x64/0xc8
__device_attach+0xd8/0x138
device_initial_probe+0x10/0x18
bus_probe_device+0x90/0x98
device_add+0x4c4/0x770
device_register+0x1c/0x28
pcie_port_device_register+0x1e4/0x4f0
pcie_portdrv_probe+0x34/0xd8
local_pci_probe+0x3c/0xa0
pci_device_probe+0x128/0x1c0
really_probe+0xa0/0x3e0
driver_probe_device+0x58/0x100
__device_attach_driver+0x90/0xb0
bus_for_each_drv+0x64/0xc8
__device_attach+0xd8/0x138
device_attach+0x10/0x18
pci_bus_add_device+0x4c/0xb8
pci_bus_add_devices+0x38/0x88
pci_host_probe+0x3c/0xc0
pci_host_common_probe+0xf0/0x208
hisi_pcie_almost_ecam_probe+0x24/0x30
platform_drv_probe+0x50/0xa0
really_probe+0xa0/0x3e0
driver_probe_device+0x58/0x100
device_driver_attach+0x6c/0x90
__driver_attach+0x84/0xc8
bus_for_each_dev+0x74/0xc8
driver_attach+0x20/0x28
bus_add_driver+0x148/0x1f0
driver_register+0x60/0x110
__platform_driver_register+0x40/0x48
hisi_pcie_almost_ecam_driver_init+0x1c/0x24
The specific problem here is that the mbigen driver real probe has failed
as the mbigen_of_create_domain()->of_platform_device_create() call fails,
the reason for that being that we never destroyed the platform device
created during the remove test dry run and there is some conflict.
Since we generally would never want to unbind this driver, and to save
adding a driver tear down path for that, just set the driver
.suppress_bind_attrs member to avoid this possibility.
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://lore.kernel.org/r/1579196323-180137-1-git-send-email-john.garry@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 708e0ada19 ]
In setup_load_info(), info->name (which contains the name of the module,
mostly used for early logging purposes before the module gets set up)
gets unconditionally assigned if .modinfo is missing despite the fact
that there is an if (!info->name) check near the end of the function.
Avoid assigning a placeholder string to info->name if .modinfo doesn't
exist, so that we can fall back to info->mod->name later on.
Fixes: 5fdc7db644 ("module: setup load info before module_sig_check()")
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a69976bc69 ]
We had a report indicating that some read errors aren't reported by the
device stats in the userland. It is important to have the errors
reported in the device stat as user land scripts might depend on it to
take the reasonable corrective actions. But to debug these issue we need
to be really sure that request to reset the device stat did not come
from the userland itself. So log an info message when device error reset
happens.
For example:
BTRFS info (device sdc): device stats zeroed by btrfs(9223)
Reported-by: philip@philip-seeger.de
Link: https://www.spinics.net/lists/linux-btrfs/msg96528.html
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4babad1019 ]
Dan's smatch tool reports
fs/btrfs/file-item.c:295 btrfs_lookup_bio_sums()
warn: should this be 'count == -1'
which points to the while (count--) loop. With count == 0 the check
itself could decrement it to -1. There's a WARN_ON a few lines below
that has never been seen in practice though.
It turns out that the value of page_bytes_left matches the count (by
sectorsize multiples). The loop never reaches the state where count
would go to -1, because page_bytes_left == 0 is found first and this
breaks out.
For clarity, use only plain check on count (and only for positive
value), decrement safely inside the loop. Any other discrepancy after
the whole bio list processing should be reported by the exising
WARN_ON_ONCE as well.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3dbd351df4 ]
A user reports a possible NULL-pointer dereference in
btrfsic_process_superblock(). We are assigning state->fs_info to a local
fs_info variable and afterwards checking for the presence of state.
While we would BUG_ON() a NULL state anyways, we can also just remove
the local fs_info copy, as fs_info is only used once as the first
argument for btrfs_num_copies(). There we can just pass in
state->fs_info as well.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=205003
Signed-off-by: Johannes Thumshirn <jth@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9871abffc8 ]
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/pwm/pwm-pca9685.c: In function ‘pca9685_pwm_gpio_free’:
drivers/pwm/pwm-pca9685.c:162:21: warning: variable ‘pwm’ set but not used [-Wunused-but-set-variable]
It is never used, and so can be removed. In that case, hold and release
the lock 'pca->lock' can be removed since nothing will be done between
them.
Fixes: e926b12c61 ("pwm: Clear chip_data in pwm_put()")
Signed-off-by: yu kuai <yukuai3@huawei.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 117fcc3053 ]
The "drive->dn" value is a u8 and it is controlled by root only, but
it could be out of bounds here so let's check.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 43efdc8f0e ]
In the old code (e.g.) mutex_destroy() was called before
pwmchip_remove(). Between these two calls it is possible that a PWM
callback is used which tries to grab the mutex.
Fixes: 6604c6556d ("pwm: Add PWM driver for OMAP using dual-mode timers")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 75fbef0a8b ]
The following commit:
15f003d207 ("x86/mm/pat: Don't implicitly allow _PAGE_RW in kernel_map_pages_in_pgd()")
modified kernel_map_pages_in_pgd() to manage writable permissions
of memory mappings in the EFI page table in a different way, but
in the process, it removed the ability to clear NX attributes from
read-only mappings, by clobbering the clear mask if _PAGE_RW is not
being requested.
Failure to remove the NX attribute from read-only mappings is
unlikely to be a security issue, but it does prevent us from
tightening the permissions in the EFI page tables going forward,
so let's fix it now.
Fixes: 15f003d207 ("x86/mm/pat: Don't implicitly allow _PAGE_RW in kernel_map_pages_in_pgd()
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200113172245.27925-5-ardb@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e915331149 ]
`cat /sys/kernel/debug/regulator/regulator_summary` ends on a deadlock
when you have a voltage controlled regulator (vctrl).
The problem is that the vctrl_get_voltage() and vctrl_set_voltage() calls the
regulator_get_voltage() and regulator_set_voltage() and that will try to lock
again the dependent regulators (the regulator supplying the control voltage).
Fix the issue by exporting the unlocked version of the regulator_get_voltage()
and regulator_set_voltage() API so drivers that need it, like the voltage
controlled regulator driver can use it.
Fixes: f8702f9e4a ("regulator: core: Use ww_mutex for regulators locking")
Reported-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20200116094543.2847321-1-enric.balletbo@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 35fd7a637c ]
The counters obj_pool_free, and obj_nr_tofree, and the flag obj_freeing are
read locklessly outside the pool_lock critical sections. If read with plain
accesses, this would result in data races.
This is addressed as follows:
* reads outside critical sections become READ_ONCE()s (pairing with
WRITE_ONCE()s added);
* writes become WRITE_ONCE()s (pairing with READ_ONCE()s added); since
writes happen inside critical sections, only the write and not the read
of RMWs needs to be atomic, thus WRITE_ONCE(var, var +/- X) is
sufficient.
The data races were reported by KCSAN:
BUG: KCSAN: data-race in __free_object / fill_pool
write to 0xffffffff8beb04f8 of 4 bytes by interrupt on cpu 1:
__free_object+0x1ee/0x8e0 lib/debugobjects.c:404
__debug_check_no_obj_freed+0x199/0x330 lib/debugobjects.c:969
debug_check_no_obj_freed+0x3c/0x44 lib/debugobjects.c:994
slab_free_hook mm/slub.c:1422 [inline]
read to 0xffffffff8beb04f8 of 4 bytes by task 1 on cpu 2:
fill_pool+0x3d/0x520 lib/debugobjects.c:135
__debug_object_init+0x3c/0x810 lib/debugobjects.c:536
debug_object_init lib/debugobjects.c:591 [inline]
debug_object_activate+0x228/0x320 lib/debugobjects.c:677
debug_rcu_head_queue kernel/rcu/rcu.h:176 [inline]
BUG: KCSAN: data-race in __debug_object_init / fill_pool
read to 0xffffffff8beb04f8 of 4 bytes by task 10 on cpu 6:
fill_pool+0x3d/0x520 lib/debugobjects.c:135
__debug_object_init+0x3c/0x810 lib/debugobjects.c:536
debug_object_init_on_stack+0x39/0x50 lib/debugobjects.c:606
init_timer_on_stack_key kernel/time/timer.c:742 [inline]
write to 0xffffffff8beb04f8 of 4 bytes by task 1 on cpu 3:
alloc_object lib/debugobjects.c:258 [inline]
__debug_object_init+0x717/0x810 lib/debugobjects.c:544
debug_object_init lib/debugobjects.c:591 [inline]
debug_object_activate+0x228/0x320 lib/debugobjects.c:677
debug_rcu_head_queue kernel/rcu/rcu.h:176 [inline]
BUG: KCSAN: data-race in free_obj_work / free_object
read to 0xffffffff9140c190 of 4 bytes by task 10 on cpu 6:
free_object+0x4b/0xd0 lib/debugobjects.c:426
debug_object_free+0x190/0x210 lib/debugobjects.c:824
destroy_timer_on_stack kernel/time/timer.c:749 [inline]
write to 0xffffffff9140c190 of 4 bytes by task 93 on cpu 1:
free_obj_work+0x24f/0x480 lib/debugobjects.c:313
process_one_work+0x454/0x8d0 kernel/workqueue.c:2264
worker_thread+0x9a/0x780 kernel/workqueue.c:2410
Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200116185529.11026-1-elver@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 11e31f608b ]
Robert reported that during boot the watchdog timestamp is set to 0 for one
second which is the indicator for a watchdog reset.
The reason for this is that the timestamp is in seconds and the time is
taken from sched clock and divided by ~1e9. sched clock starts at 0 which
means that for the first second during boot the watchdog timestamp is 0,
i.e. reset.
Use ULONG_MAX as the reset indicator value so the watchdog works correctly
right from the start. ULONG_MAX would only conflict with a real timestamp
if the system reaches an uptime of 136 years on 32bit and almost eternity
on 64bit.
Reported-by: Robert Richter <rrichter@marvell.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/87o8v3uuzl.fsf@nanos.tec.linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 471af006a7 ]
AMD Family 17h processors and above gain support for Large Increment
per Cycle events. Unfortunately there is no CPUID or equivalent bit
that indicates whether the feature exists or not, so we continue to
determine eligibility based on a CPU family number comparison.
For Large Increment per Cycle events, we add a f17h-and-compatibles
get_event_constraints_f17h() that returns an even counter bitmask:
Large Increment per Cycle events can only be placed on PMCs 0, 2,
and 4 out of the currently available 0-5. The only currently
public event that requires this feature to report valid counts
is PMCx003 "Retired SSE/AVX Operations".
Note that the CPU family logic in amd_core_pmu_init() is changed
so as to be able to selectively add initialization for features
available in ranges of backward-compatible CPU families. This
Large Increment per Cycle feature is expected to be retained
in future families.
A side-effect of assigning a new get_constraints function for f17h
disables calling the old (prior to f15h) amd_get_event_constraints
implementation left enabled by commit e40ed1542d ("perf/x86: Add perf
support for AMD family-17h processors"), which is no longer
necessary since those North Bridge event codes are obsoleted.
Also fix a spelling mistake whilst in the area (calulating ->
calculating).
Fixes: e40ed1542d ("perf/x86: Add perf support for AMD family-17h processors")
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20191114183720.19887-2-kim.phillips@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ccf74128d6 ]
topology.c::get_group() relies on the assumption that non-NUMA domains do
not partially overlap. Zeng Tao pointed out in [1] that such topology
descriptions, while completely bogus, can end up being exposed to the
scheduler.
In his example (8 CPUs, 2-node system), we end up with:
MC span for CPU3 == 3-7
MC span for CPU4 == 4-7
The first pass through get_group(3, sdd@MC) will result in the following
sched_group list:
3 -> 4 -> 5 -> 6 -> 7
^ /
`----------------'
And a later pass through get_group(4, sdd@MC) will "corrupt" that to:
3 -> 4 -> 5 -> 6 -> 7
^ /
`-----------'
which will completely break things like 'while (sg != sd->groups)' when
using CPU3's base sched_domain.
There already are some architecture-specific checks in place such as
x86/kernel/smpboot.c::topology.sane(), but this is something we can detect
in the core scheduler, so it seems worthwhile to do so.
Warn and abort the construction of the sched domains if such a broken
topology description is detected. Note that this is somewhat
expensive (O(t.c²), 't' non-NUMA topology levels and 'c' CPUs) and could be
gated under SCHED_DEBUG if deemed necessary.
Testing
=======
Dietmar managed to reproduce this using the following qemu incantation:
$ qemu-system-aarch64 -kernel ./Image -hda ./qemu-image-aarch64.img \
-append 'root=/dev/vda console=ttyAMA0 loglevel=8 sched_debug' -smp \
cores=8 --nographic -m 512 -cpu cortex-a53 -machine virt -numa \
node,cpus=0-2,nodeid=0 -numa node,cpus=3-7,nodeid=1
alongside the following drivers/base/arch_topology.c hack (AIUI wouldn't be
needed if '-smp cores=X, sockets=Y' would work with qemu):
8<---
@@ -465,6 +465,9 @@ void update_siblings_masks(unsigned int cpuid)
if (cpuid_topo->package_id != cpu_topo->package_id)
continue;
+ if ((cpu < 4 && cpuid > 3) || (cpu > 3 && cpuid < 4))
+ continue;
+
cpumask_set_cpu(cpuid, &cpu_topo->core_sibling);
cpumask_set_cpu(cpu, &cpuid_topo->core_sibling);
8<---
[1]: https://lkml.kernel.org/r/1577088979-8545-1-git-send-email-prime.zeng@hisilicon.com
Reported-by: Zeng Tao <prime.zeng@hisilicon.com>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200115160915.22575-1-valentin.schneider@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
