commit 14d069d92951a3e150c0a81f2ca3b93e54da913b upstream.
On ACPI machines, the tegra i2c module encounters an issue due to a
mutex being called inside a spinlock. This leads to the following bug:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:585
...
Call trace:
__might_sleep
__mutex_lock_common
mutex_lock_nested
acpi_subsys_runtime_resume
rpm_resume
tegra_i2c_xfer
The problem arises because during __pm_runtime_resume(), the spinlock
&dev->power.lock is acquired before rpm_resume() is called. Later,
rpm_resume() invokes acpi_subsys_runtime_resume(), which relies on
mutexes, triggering the error.
To address this issue, devices on ACPI are now marked as not IRQ-safe,
considering the dependency of acpi_subsys_runtime_resume() on mutexes.
Fixes: bd2fdedbf2 ("i2c: tegra: Add the ACPI support")
Cc: <stable@vger.kernel.org> # v5.17+
Co-developed-by: Michael van der Westhuizen <rmikey@meta.com>
Signed-off-by: Michael van der Westhuizen <rmikey@meta.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 57d76bc51fd80824bcc0c84a5b5ec944f1b51edd upstream.
With XIP kernel, kernel_map.size is set to be only the size of data part of
the kernel. This is inconsistent with "normal" kernel, who sets it to be
the size of the entire kernel.
More importantly, XIP kernel fails to boot if CONFIG_DEBUG_VIRTUAL is
enabled, because there are checks on virtual addresses with the assumption
that kernel_map.size is the size of the entire kernel (these checks are in
arch/riscv/mm/physaddr.c).
Change XIP's kernel_map.size to be the size of the entire kernel.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Cc: <stable@vger.kernel.org> # v6.1+
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240508191917.2892064-1-namcao@linutronix.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5a44bb061d04b0306f2aa8add761d86d152b9377 upstream.
We might run into a SIE validity if gisa has been disabled either via using
kernel parameter "kvm.use_gisa=0" or by setting the related sysfs
attribute to N (echo N >/sys/module/kvm/parameters/use_gisa).
The validity is caused by an invalid value in the SIE control block's
gisa designation. That happens because we pass the uninitialized gisa
origin to virt_to_phys() before writing it to the gisa designation.
To fix this we return 0 in kvm_s390_get_gisa_desc() if the origin is 0.
kvm_s390_get_gisa_desc() is used to determine which gisa designation to
set in the SIE control block. A value of 0 in the gisa designation disables
gisa usage.
The issue surfaces in the host kernel with the following kernel message as
soon a new kvm guest start is attemted.
kvm: unhandled validity intercept 0x1011
WARNING: CPU: 0 PID: 781237 at arch/s390/kvm/intercept.c:101 kvm_handle_sie_intercept+0x42e/0x4d0 [kvm]
Modules linked in: vhost_net tap tun xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT xt_tcpudp nft_compat x_tables nf_nat_tftp nf_conntrack_tftp vfio_pci_core irqbypass vhost_vsock vmw_vsock_virtio_transport_common vsock vhost vhost_iotlb kvm nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables sunrpc mlx5_ib ib_uverbs ib_core mlx5_core uvdevice s390_trng eadm_sch vfio_ccw zcrypt_cex4 mdev vfio_iommu_type1 vfio sch_fq_codel drm i2c_core loop drm_panel_orientation_quirks configfs nfnetlink lcs ctcm fsm dm_service_time ghash_s390 prng chacha_s390 libchacha aes_s390 des_s390 libdes sha3_512_s390 sha3_256_s390 sha512_s390 sha256_s390 sha1_s390 sha_common dm_mirror dm_region_hash dm_log zfcp scsi_transport_fc scsi_dh_rdac scsi_dh_emc scsi_dh_alua pkey zcrypt dm_multipath rng_core autofs4 [last unloaded: vfio_pci]
CPU: 0 PID: 781237 Comm: CPU 0/KVM Not tainted 6.10.0-08682-gcad9f11498ea #6
Hardware name: IBM 3931 A01 701 (LPAR)
Krnl PSW : 0704c00180000000 000003d93deb0122 (kvm_handle_sie_intercept+0x432/0x4d0 [kvm])
R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3
Krnl GPRS: 000003d900000027 000003d900000023 0000000000000028 000002cd00000000
000002d063a00900 00000359c6daf708 00000000000bebb5 0000000000001eff
000002cfd82e9000 000002cfd80bc000 0000000000001011 000003d93deda412
000003ff8962df98 000003d93de77ce0 000003d93deb011e 00000359c6daf960
Krnl Code: 000003d93deb0112: c020fffe7259 larl %r2,000003d93de7e5c4
000003d93deb0118: c0e53fa8beac brasl %r14,000003d9bd3c7e70
#000003d93deb011e: af000000 mc 0,0
>000003d93deb0122: a728ffea lhi %r2,-22
000003d93deb0126: a7f4fe24 brc 15,000003d93deafd6e
000003d93deb012a: 9101f0b0 tm 176(%r15),1
000003d93deb012e: a774fe48 brc 7,000003d93deafdbe
000003d93deb0132: 40a0f0ae sth %r10,174(%r15)
Call Trace:
[<000003d93deb0122>] kvm_handle_sie_intercept+0x432/0x4d0 [kvm]
([<000003d93deb011e>] kvm_handle_sie_intercept+0x42e/0x4d0 [kvm])
[<000003d93deacc10>] vcpu_post_run+0x1d0/0x3b0 [kvm]
[<000003d93deaceda>] __vcpu_run+0xea/0x2d0 [kvm]
[<000003d93dead9da>] kvm_arch_vcpu_ioctl_run+0x16a/0x430 [kvm]
[<000003d93de93ee0>] kvm_vcpu_ioctl+0x190/0x7c0 [kvm]
[<000003d9bd728b4e>] vfs_ioctl+0x2e/0x70
[<000003d9bd72a092>] __s390x_sys_ioctl+0xc2/0xd0
[<000003d9be0e9222>] __do_syscall+0x1f2/0x2e0
[<000003d9be0f9a90>] system_call+0x70/0x98
Last Breaking-Event-Address:
[<000003d9bd3c7f58>] __warn_printk+0xe8/0xf0
Cc: stable@vger.kernel.org
Reported-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Fixes: fe0ef00304 ("KVM: s390: sort out physical vs virtual pointers usage")
Signed-off-by: Michael Mueller <mimu@linux.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20240801123109.2782155-1-mimu@linux.ibm.com
Message-ID: <20240801123109.2782155-1-mimu@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7db4042336580dfd75cb5faa82c12cd51098c90b upstream.
Extent Space Efficient (ESE) or thin provisioned volumes need to be
formatted on demand during usual IO processing.
The dasd_ese_needs_format function checks for error codes that signal
the non existence of a proper track format.
The check for incorrect length is to imprecise since other error cases
leading to transport of insufficient data also have this flag set.
This might lead to data corruption in certain error cases for example
during a storage server warmstart.
Fix by removing the check for incorrect length and replacing by
explicitly checking for invalid track format in transport mode.
Also remove the check for file protected since this is not a valid
ESE handling case.
Cc: stable@vger.kernel.org # 5.3+
Fixes: 5e2b17e712 ("s390/dasd: Add dynamic formatting support for ESE volumes")
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20240812125733.126431-3-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e2006140ad2e01a02ed0aff49cc2ae3ceeb11f8d upstream.
I noticed that when we do discrete host router NVM upgrade and it gets
hot-removed from the PCIe side as a result of NVM firmware authentication,
if there is another host connected with enabled paths we hang in tearing
them down. This is due to fact that the Thunderbolt networking driver
also tries to cleanup the paths and ends up blocking in
tb_disconnect_xdomain_paths() waiting for the domain lock.
However, at this point we already cleaned the paths in tb_stop() so
there is really no need for tb_disconnect_xdomain_paths() to do that
anymore. Furthermore it already checks if the XDomain is unplugged and
bails out early so take advantage of that and mark the XDomain as
unplugged when we remove the parent router.
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit af8e119f52e9c13e556be9e03f27957554a84656 upstream.
re-enumerating full-speed devices after a failed address device command
can trigger a NULL pointer dereference.
Full-speed devices may need to reconfigure the endpoint 0 Max Packet Size
value during enumeration. Usb core calls usb_ep0_reinit() in this case,
which ends up calling xhci_configure_endpoint().
On Panther point xHC the xhci_configure_endpoint() function will
additionally check and reserve bandwidth in software. Other hosts do
this in hardware
If xHC address device command fails then a new xhci_virt_device structure
is allocated as part of re-enabling the slot, but the bandwidth table
pointers are not set up properly here.
This triggers the NULL pointer dereference the next time usb_ep0_reinit()
is called and xhci_configure_endpoint() tries to check and reserve
bandwidth
[46710.713538] usb 3-1: new full-speed USB device number 5 using xhci_hcd
[46710.713699] usb 3-1: Device not responding to setup address.
[46710.917684] usb 3-1: Device not responding to setup address.
[46711.125536] usb 3-1: device not accepting address 5, error -71
[46711.125594] BUG: kernel NULL pointer dereference, address: 0000000000000008
[46711.125600] #PF: supervisor read access in kernel mode
[46711.125603] #PF: error_code(0x0000) - not-present page
[46711.125606] PGD 0 P4D 0
[46711.125610] Oops: Oops: 0000 [#1] PREEMPT SMP PTI
[46711.125615] CPU: 1 PID: 25760 Comm: kworker/1:2 Not tainted 6.10.3_2 #1
[46711.125620] Hardware name: Gigabyte Technology Co., Ltd.
[46711.125623] Workqueue: usb_hub_wq hub_event [usbcore]
[46711.125668] RIP: 0010:xhci_reserve_bandwidth (drivers/usb/host/xhci.c
Fix this by making sure bandwidth table pointers are set up correctly
after a failed address device command, and additionally by avoiding
checking for bandwidth in cases like this where no actual endpoints are
added or removed, i.e. only context for default control endpoint 0 is
evaluated.
Reported-by: Karel Balej <balejk@matfyz.cz>
Closes: https://lore.kernel.org/linux-usb/D3CKQQAETH47.1MUO22RTCH2O3@matfyz.cz/
Cc: stable@vger.kernel.org
Fixes: 651aaf36a7 ("usb: xhci: Handle USB transaction error on address command")
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240815141117.2702314-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2374bf7558de915edc6ec8cb10ec3291dfab9594 upstream.
Ensure, as the driver probes the device, that all endpoints that the
driver may attempt to access exist and are of the correct type.
All XillyUSB devices must have a Bulk IN and Bulk OUT endpoint at
address 1. This is verified in xillyusb_setup_base_eps().
On top of that, a XillyUSB device may have additional Bulk OUT
endpoints. The information about these endpoints' addresses is deduced
from a data structure (the IDT) that the driver fetches from the device
while probing it. These endpoints are checked in setup_channels().
A XillyUSB device never has more than one IN endpoint, as all data
towards the host is multiplexed in this single Bulk IN endpoint. This is
why setup_channels() only checks OUT endpoints.
Reported-by: syzbot+eac39cba052f2e750dbe@syzkaller.appspotmail.com
Cc: stable <stable@kernel.org>
Closes: https://lore.kernel.org/all/0000000000001d44a6061f7a54ee@google.com/T/
Fixes: a53d1202ae ("char: xillybus: Add driver for XillyUSB (Xillybus variant for USB)").
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Link: https://lore.kernel.org/r/20240816070200.50695-2-eli.billauer@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ad899c301c880766cc709aad277991b3ab671b66 upstream.
As the wakeup work item now runs on a separate workqueue, it needs to be
flushed separately along with flushing the device's workqueue.
Also, move the destroy_workqueue() call to the end of the exit method,
so that deinitialization is done in the opposite order of
initialization.
Fixes: ccbde4b128ef ("char: xillybus: Don't destroy workqueue from work item running on it")
Cc: stable <stable@kernel.org>
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Link: https://lore.kernel.org/r/20240816070200.50695-1-eli.billauer@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3c0da3d163eb32f1f91891efaade027fa9b245b9 upstream.
fuse_notify_store(), unlike fuse_do_readpage(), does not enable page
zeroing (because it can be used to change partial page contents).
So fuse_notify_store() must be more careful to fully initialize page
contents (including parts of the page that are beyond end-of-file)
before marking the page uptodate.
The current code can leave beyond-EOF page contents uninitialized, which
makes these uninitialized page contents visible to userspace via mmap().
This is an information leak, but only affects systems which do not
enable init-on-alloc (via CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y or the
corresponding kernel command line parameter).
Link: https://bugs.chromium.org/p/project-zero/issues/detail?id=2574
Cc: stable@kernel.org
Fixes: a1d75f2582 ("fuse: add store request")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 05a3d6e9307250a5911d75308e4363466794ab21 upstream.
Unfortunately it appears that vma_is_initial_heap() is currently broken
for applications that do not currently have any heap allocated, e.g.
brk == start_brk. The breakage is such that it will cause SELinux to
check for the process/execheap permission on memory regions that cross
brk/start_brk even when there is no heap.
The proper fix would be to correct vma_is_initial_heap(), but as there
are multiple callers I am hesitant to unilaterally modify the helper
out of concern that I would end up breaking some other subsystem. The
mm developers have been made aware of the situation and hopefully they
will have a fix at some point in the future, but we need a fix soon so
we are simply going to revert our use of vma_is_initial_heap() in favor
of our old logic/code which works as expected, even in the face of a
zero size heap. We can return to using vma_is_initial_heap() at some
point in the future when it is fixed.
Cc: stable@vger.kernel.org
Reported-by: Marc Reisner <reisner.marc@gmail.com>
Closes: https://lore.kernel.org/all/ZrPmoLKJEf1wiFmM@marcreisner.com
Fixes: 68df1baf15 ("selinux: use vma_is_initial_stack() and vma_is_initial_heap()")
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 21ea1ce37fc267dc45fe27517bbde926211683df upstream.
This reverts commit bf20c69cf3cf9c6445c4925dd9a8a6ca1b78bfdf.
During tcpm_init() stage, if the VBUS is still present after
tcpm_reset_port(), then we assume that VBUS will off and goto safe0v
after a specific discharge time. Following a TCPM_VBUS_EVENT event if
VBUS reach to off state. TCPM_VBUS_EVENT event may be set during
PORT_RESET handling stage. If pd_events reset to 0 after TCPM_VBUS_EVENT
set, we will lost this VBUS event. Then the port state machine may stuck
at one state.
Before:
[ 2.570172] pending state change PORT_RESET -> PORT_RESET_WAIT_OFF @ 100 ms [rev1 NONE_AMS]
[ 2.570179] state change PORT_RESET -> PORT_RESET_WAIT_OFF [delayed 100 ms]
[ 2.570182] pending state change PORT_RESET_WAIT_OFF -> SNK_UNATTACHED @ 920 ms [rev1 NONE_AMS]
[ 3.490213] state change PORT_RESET_WAIT_OFF -> SNK_UNATTACHED [delayed 920 ms]
[ 3.490220] Start toggling
[ 3.546050] CC1: 0 -> 0, CC2: 0 -> 2 [state TOGGLING, polarity 0, connected]
[ 3.546057] state change TOGGLING -> SRC_ATTACH_WAIT [rev1 NONE_AMS]
After revert this patch, we can see VBUS off event and the port will goto
expected state.
[ 2.441992] pending state change PORT_RESET -> PORT_RESET_WAIT_OFF @ 100 ms [rev1 NONE_AMS]
[ 2.441999] state change PORT_RESET -> PORT_RESET_WAIT_OFF [delayed 100 ms]
[ 2.442002] pending state change PORT_RESET_WAIT_OFF -> SNK_UNATTACHED @ 920 ms [rev1 NONE_AMS]
[ 2.442122] VBUS off
[ 2.442125] state change PORT_RESET_WAIT_OFF -> SNK_UNATTACHED [rev1 NONE_AMS]
[ 2.442127] VBUS VSAFE0V
[ 2.442351] CC1: 0 -> 0, CC2: 0 -> 0 [state SNK_UNATTACHED, polarity 0, disconnected]
[ 2.442357] Start toggling
[ 2.491850] CC1: 0 -> 0, CC2: 0 -> 2 [state TOGGLING, polarity 0, connected]
[ 2.491858] state change TOGGLING -> SRC_ATTACH_WAIT [rev1 NONE_AMS]
[ 2.491863] pending state change SRC_ATTACH_WAIT -> SNK_TRY @ 200 ms [rev1 NONE_AMS]
[ 2.691905] state change SRC_ATTACH_WAIT -> SNK_TRY [delayed 200 ms]
Fixes: bf20c69cf3cf ("usb: typec: tcpm: clear pd_event queue in PORT_RESET")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240809112901.535072-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c9f6613b16123989f2c3bd04b1d9b2365d6914e7 upstream.
In RS485 mode, the RTS pin is driven high by hardware when the transmitter
is operating. This behaviour cannot be changed. This means that the driver
should claim that it supports SER_RS485_RTS_ON_SEND and not
SER_RS485_RTS_AFTER_SEND.
Otherwise, when configuring the port with the SER_RS485_RTS_ON_SEND, one
get the following warning:
kern.warning kernel: atmel_usart_serial atmel_usart_serial.2.auto:
ttyS1 (1): invalid RTS setting, using RTS_AFTER_SEND instead
which is contradictory with what's really happening.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
Cc: stable <stable@kernel.org>
Tested-by: Alexander Dahl <ada@thorsis.com>
Fixes: af47c491e3 ("serial: atmel: Fill in rs485_supported")
Link: https://lore.kernel.org/r/20240808060637.19886-1-othacehe@gnu.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dc98d76a15bc29a9a4e76f2f65f39f3e590fb15c upstream.
With "earlycon initcall_debug=1 loglevel=8" in bootargs, kernel
sometimes boot hang. It is because normal console still is not ready,
but runtime suspend is called, so early console putchar will hang
in waiting TRDE set in UARTSTAT.
The lpuart driver has auto suspend delay set to 3000ms, but during
uart_add_one_port, a child device serial ctrl will added and probed with
its pm runtime enabled(see serial_ctrl.c).
The runtime suspend call path is:
device_add
|-> bus_probe_device
|->device_initial_probe
|->__device_attach
|-> pm_runtime_get_sync(dev->parent);
|-> pm_request_idle(dev);
|-> pm_runtime_put(dev->parent);
So in the end, before normal console ready, the lpuart get runtime
suspended. And earlycon putchar will hang.
To address the issue, mark last busy just after pm_runtime_enable,
three seconds is long enough to switch from bootconsole to normal
console.
Fixes: 43543e6f53 ("tty: serial: fsl_lpuart: Add runtime pm support")
Cc: stable <stable@kernel.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20240808140325.580105-1-peng.fan@oss.nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fa0db8e568787c665384430eaf2221b299b85367 upstream.
This reverts commit 28ab9769117ca944cb6eb537af5599aa436287a4.
Sense data can be in either fixed format or descriptor format.
SAT-6 revision 1, "10.4.6 Control mode page", defines the D_SENSE bit:
"The SATL shall support this bit as defined in SPC-5 with the following
exception: if the D_ SENSE bit is set to zero (i.e., fixed format sense
data), then the SATL should return fixed format sense data for ATA
PASS-THROUGH commands."
The libata SATL has always kept D_SENSE set to zero by default. (It is
however possible to change the value using a MODE SELECT SG_IO command.)
Failed ATA PASS-THROUGH commands correctly respected the D_SENSE bit,
however, successful ATA PASS-THROUGH commands incorrectly returned the
sense data in descriptor format (regardless of the D_SENSE bit).
Commit 28ab9769117c ("ata: libata-scsi: Honor the D_SENSE bit for
CK_COND=1 and no error") fixed this bug for successful ATA PASS-THROUGH
commands.
However, after commit 28ab9769117c ("ata: libata-scsi: Honor the D_SENSE
bit for CK_COND=1 and no error"), there were bug reports that hdparm,
hddtemp, and udisks were no longer working as expected.
These applications incorrectly assume the returned sense data is in
descriptor format, without even looking at the RESPONSE CODE field in the
returned sense data (to see which format the returned sense data is in).
Considering that there will be broken versions of these applications around
roughly forever, we are stuck with being bug compatible with older kernels.
Cc: stable@vger.kernel.org # 4.19+
Reported-by: Stephan Eisvogel <eisvogel@seitics.de>
Reported-by: Christian Heusel <christian@heusel.eu>
Closes: https://lore.kernel.org/linux-ide/0bf3f2f0-0fc6-4ba5-a420-c0874ef82d64@heusel.eu/
Fixes: 28ab9769117c ("ata: libata-scsi: Honor the D_SENSE bit for CK_COND=1 and no error")
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240813131900.1285842-2-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0c84bde4f37ba27d50e4c70ecacd33fe4a57030d upstream.
This reverts commit 2052138b7da52ad5ccaf74f736d00f39a1c9198c.
This breaks the TeVii s480 dual DVB-S2 S660. The device has a bulk in
endpoint but no corresponding out endpoint, so the device does not pass
the "has both receive and send bulk endpoint" test.
Seemingly this device does not use dvb_usb_generic_rw() so I have tried
removing the generic_bulk_ctrl_endpoint entry, but this resulted in
different problems.
As we have no explanation yet, revert.
$ dmesg | grep -i -e dvb -e dw21 -e usb\ 4
[ 0.999122] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.023123] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 1.130247] usb 1-1: New USB device found, idVendor=9022, idProduct=d482,
+bcdDevice= 0.01
[ 1.130257] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.152323] usb 4-1: New USB device found, idVendor=9022, idProduct=d481,
+bcdDevice= 0.01
[ 1.152329] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 6.701033] dvb-usb: found a 'TeVii S480.2 USB' in cold state, will try to
+load a firmware
[ 6.701178] dvb-usb: downloading firmware from file 'dvb-usb-s660.fw'
[ 6.701179] dw2102: start downloading DW210X firmware
[ 6.703715] dvb-usb: found a 'Microsoft Xbox One Digital TV Tuner' in cold
+state, will try to load a firmware
[ 6.703974] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
[ 6.756432] usb 1-1: USB disconnect, device number 2
[ 6.862119] dvb-usb: found a 'TeVii S480.2 USB' in warm state.
[ 6.862194] dvb-usb: TeVii S480.2 USB error while loading driver (-22)
[ 6.862209] dvb-usb: found a 'TeVii S480.1 USB' in cold state, will try to
+load a firmware
[ 6.862244] dvb-usb: downloading firmware from file 'dvb-usb-s660.fw'
[ 6.862245] dw2102: start downloading DW210X firmware
[ 6.914811] usb 4-1: USB disconnect, device number 2
[ 7.014131] dvb-usb: found a 'TeVii S480.1 USB' in warm state.
[ 7.014487] dvb-usb: TeVii S480.1 USB error while loading driver (-22)
[ 7.014538] usbcore: registered new interface driver dw2102
Closes: https://lore.kernel.org/stable/20240801165146.38991f60@mir/
Fixes: 2052138b7da5 ("media: dvb-usb: Fix unexpected infinite loop in dvb_usb_read_remote_control()")
Reported-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f62d4c3eb687d87b616b4279acec7862553bda77 upstream.
Commit 7657ea920c ("KVM: arm64: Use TLBI range-based instructions for
unmap") introduced deferred TLB invalidation for the stage-2 page-table
so that range-based invalidation can be used for the accumulated
addresses. This works fine if the structure of the page-tables remains
unchanged, but if entire tables are zapped and subsequently freed then
we transiently leave the hardware page-table walker with a reference
to freed memory thanks to the translation walk caches. For example,
stage2_unmap_walker() will free page-table pages:
if (childp)
mm_ops->put_page(childp);
and issue the TLB invalidation later in kvm_pgtable_stage2_unmap():
if (stage2_unmap_defer_tlb_flush(pgt))
/* Perform the deferred TLB invalidations */
kvm_tlb_flush_vmid_range(pgt->mmu, addr, size);
For now, take the conservative approach and invalidate the TLB eagerly
when we clear a table entry. Note, however, that the existing level
hint passed to __kvm_tlb_flush_vmid_ipa() is incorrect and will be
fixed in a subsequent patch.
Cc: Raghavendra Rao Ananta <rananta@google.com>
Cc: Shaoqin Huang <shahuang@redhat.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240327124853.11206-2-will@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Cc: <stable@vger.kernel.org> # 6.6.y only
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a7fb0423c201ba12815877a0b5a68a6a1710b23a upstream.
Commit d23b5c577715 ("cgroup: Make operations on the cgroup root_list RCU
safe") adds a new rcu_head to the cgroup_root structure and kvfree_rcu()
for freeing the cgroup_root.
The current implementation of kvfree_rcu(), however, has the limitation
that the offset of the rcu_head structure within the larger data
structure must be less than 4096 or the compilation will fail. See the
macro definition of __is_kvfree_rcu_offset() in include/linux/rcupdate.h
for more information.
By putting rcu_head below the large cgroup structure, any change to the
cgroup structure that makes it larger run the risk of causing build
failure under certain configurations. Commit 77070eeb8821 ("cgroup:
Avoid false cacheline sharing of read mostly rstat_cpu") happens to be
the last straw that breaks it. Fix this problem by moving the rcu_head
structure up before the cgroup structure.
Fixes: d23b5c577715 ("cgroup: Make operations on the cgroup root_list RCU safe")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/lkml/20231207143806.114e0a74@canb.auug.org.au/
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0b1ef4fde7a24909ff2afacffd0d6afa28b73652 upstream.
Macro RANDOM_ORVALUE was used to make sure the pgtable entry will be
populated with !none data in clear tests.
The RANDOM_ORVALUE tried to cover mostly all the bits in a pgtable entry,
even if there's no discussion on whether all the bits will be vaild. Both
S390 and PPC64 have their own masks to avoid touching some bits. Now it's
the turn for x86_64.
The issue is there's a recent report from Mikhail Gavrilov showing that
this can cause a warning with the newly added pte set check in commit
8430557fc5 on writable v.s. userfaultfd-wp bit, even though the check
itself was valid, the random pte is not. We can choose to mask more bits
out.
However the need to have such random bits setup is questionable, as now
it's already guaranteed to be true on below:
- For pte level, the pgtable entry will be installed with value from
pfn_pte(), where pfn points to a valid page. Hence the pte will be
!none already if populated with pfn_pte().
- For upper-than-pte level, the pgtable entry should contain a directory
entry always, which is also !none.
All the cases look like good enough to test a pxx_clear() helper. Instead
of extending the bitmask, drop the "set random bits" trick completely. Add
some warning guards to make sure the entries will be !none before clear().
Link: https://lkml.kernel.org/r/20240523132139.289719-1-peterx@redhat.com
Fixes: 8430557fc584 ("mm/page_table_check: support userfault wr-protect entries")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Link: https://lore.kernel.org/r/CABXGCsMB9A8-X+Np_Q+fWLURYL_0t3Y-MdoNabDM-Lzk58-DGA@mail.gmail.com
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Gavin Shan <gshan@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7105e92c60c9cc4112c782d69c172e96b69a43dc upstream.
This patch intended to fix an well-knonw issue in old drivers where the
endpoint type is taken for granted, which is often triggered by fuzzers.
That was the case for this driver [1], and although the fix seems to be
correct, it uncovered another issue that leads to a regression [2], if
the endpoints of the current interface are checked.
The driver makes use of endpoints that belong to a different interface
rather than the one it binds (it binds to the third interface, but also
accesses an endpoint from a different one). The driver should claim the
interfaces it requires, but that is still not the case.
Given that the regression is more severe than the issue found by
syzkaller, the best approach is reverting the patch that causes the
regression, and trying to fix the underlying problem before checking
the endpoint types again.
Note that reverting this patch will probably trigger the syzkaller bug
at some point.
This reverts commit 2b9c3eb32a699acdd4784d6b93743271b4970899.
Link: https://syzkaller.appspot.com/bug?extid=348331f63b034f89b622 [1]
Link: https://lore.kernel.org/linux-input/87sf161jjc.wl-tiwai@suse.de/ [2]
Fixes: 2b9c3eb32a69 ("Input: bcm5974 - check endpoint type before starting traffic")
Reported-by: Jacopo Radice <jacopo.radice@outlook.com>
Closes: https://bugzilla.suse.com/show_bug.cgi?id=1220030
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240305-revert_bcm5974_ep_check-v3-1-527198cf6499@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e42e29cc442395d62f1a8963ec2dfb700ba6a5d7 upstream.
This reverts commit cca974daeb6c43ea971f8ceff5a7080d7d49ee30.
The added sanity check is incorrect. BUDMIN is not the wrong value and
is too small.
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3eb3cd5992f7a0c37edc8d05b4c38c98758d8671 ]
Commit 04d82a6d08 ("binfmt_flat: allow not offsetting data start")
introduced a RISC-V specific variant of the FLAT format which does
not allocate any space for the (obsolete) array of shared library
pointers. However, it did not disable the code which initializes the
array, resulting in the corruption of sizeof(long) bytes before the DATA
segment, generally the end of the TEXT segment.
Introduce MAX_SHARED_LIBS_UPDATE which depends on the state of
CONFIG_BINFMT_FLAT_NO_DATA_START_OFFSET to guard the initialization of
the shared library pointer region so that it will only be initialized
if space is reserved for it.
Fixes: 04d82a6d08 ("binfmt_flat: allow not offsetting data start")
Co-developed-by: Stefan O'Rear <sorear@fastmail.com>
Signed-off-by: Stefan O'Rear <sorear@fastmail.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Acked-by: Greg Ungerer <gerg@linux-m68k.org>
Link: https://lore.kernel.org/r/20240807195119.it.782-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ce6dede912f064a855acf6f04a04cbb2c25b8c8c ]
[syzbot reported]
general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 0 PID: 5061 Comm: syz-executor404 Not tainted 6.8.0-syzkaller-08951-gfe46a7dd189e #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
RIP: 0010:dtInsertEntry+0xd0c/0x1780 fs/jfs/jfs_dtree.c:3713
...
[Analyze]
In dtInsertEntry(), when the pointer h has the same value as p, after writing
name in UniStrncpy_to_le(), p->header.flag will be cleared. This will cause the
previously true judgment "p->header.flag & BT-LEAF" to change to no after writing
the name operation, this leads to entering an incorrect branch and accessing the
uninitialized object ih when judging this condition for the second time.
[Fix]
After got the page, check freelist first, if freelist == 0 then exit dtInsert()
and return -EINVAL.
Reported-by: syzbot+bba84aef3a26fb93deb9@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dd89a81d850fa9a65f67b4527c0e420d15bf836c ]
Drop the WARN_ON_ONCE inn gue_gro_receive if the encapsulated type is
not known or does not have a GRO handler.
Such a packet is easily constructed. Syzbot generates them and sets
off this warning.
Remove the warning as it is expected and not actionable.
The warning was previously reduced from WARN_ON to WARN_ON_ONCE in
commit 270136613b ("fou: Do WARN_ON_ONCE in gue_gro_receive for bad
proto callbacks").
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240614122552.1649044-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fc01008c92f40015aeeced94750855a7111b6929 ]
syzbot reports a f2fs bug as below:
------------[ cut here ]------------
kernel BUG at fs/f2fs/inline.c:258!
CPU: 1 PID: 34 Comm: kworker/u8:2 Not tainted 6.9.0-rc6-syzkaller-00012-g9e4bc4bcae01 #0
RIP: 0010:f2fs_write_inline_data+0x781/0x790 fs/f2fs/inline.c:258
Call Trace:
f2fs_write_single_data_page+0xb65/0x1d60 fs/f2fs/data.c:2834
f2fs_write_cache_pages fs/f2fs/data.c:3133 [inline]
__f2fs_write_data_pages fs/f2fs/data.c:3288 [inline]
f2fs_write_data_pages+0x1efe/0x3a90 fs/f2fs/data.c:3315
do_writepages+0x35b/0x870 mm/page-writeback.c:2612
__writeback_single_inode+0x165/0x10b0 fs/fs-writeback.c:1650
writeback_sb_inodes+0x905/0x1260 fs/fs-writeback.c:1941
wb_writeback+0x457/0xce0 fs/fs-writeback.c:2117
wb_do_writeback fs/fs-writeback.c:2264 [inline]
wb_workfn+0x410/0x1090 fs/fs-writeback.c:2304
process_one_work kernel/workqueue.c:3254 [inline]
process_scheduled_works+0xa12/0x17c0 kernel/workqueue.c:3335
worker_thread+0x86d/0xd70 kernel/workqueue.c:3416
kthread+0x2f2/0x390 kernel/kthread.c:388
ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
The root cause is: inline_data inode can be fuzzed, so that there may
be valid blkaddr in its direct node, once f2fs triggers background GC
to migrate the block, it will hit f2fs_bug_on() during dirty page
writeback.
Let's add sanity check on F2FS_INLINE_DATA flag in inode during GC,
so that, it can forbid migrating inline_data inode's data block for
fixing.
Reported-by: syzbot+848062ba19c8782ca5c8@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-f2fs-devel/000000000000d103ce06174d7ec3@google.com
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4d5cdd757d0c74924b629559fccb68d8803ce995 ]
There's nothing page-specific happening in ext4_da_do_write_end();
it's merely used for its refcount & lock, both of which are folio
properties. Saves four calls to compound_head().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231214053035.1018876-1-willy@infradead.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: 83f4414b8f84 ("ext4: sanity check for NULL pointer after ext4_force_shutdown")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8430557fc584657559bfbd5150b6ae1bb90f35a0 ]
Allow page_table_check hooks to check over userfaultfd wr-protect criteria
upon pgtable updates. The rule is no co-existance allowed for any
writable flag against userfault wr-protect flag.
This should be better than c2da319c2e, where we used to only sanitize such
issues during a pgtable walk, but when hitting such issue we don't have a
good chance to know where does that writable bit came from [1], so that
even the pgtable walk exposes a kernel bug (which is still helpful on
triaging) but not easy to track and debug.
Now we switch to track the source. It's much easier too with the recent
introduction of page table check.
There are some limitations with using the page table check here for
userfaultfd wr-protect purpose:
- It is only enabled with explicit enablement of page table check configs
and/or boot parameters, but should be good enough to track at least
syzbot issues, as syzbot should enable PAGE_TABLE_CHECK[_ENFORCED] for
x86 [1]. We used to have DEBUG_VM but it's now off for most distros,
while distros also normally not enable PAGE_TABLE_CHECK[_ENFORCED], which
is similar.
- It conditionally works with the ptep_modify_prot API. It will be
bypassed when e.g. XEN PV is enabled, however still work for most of the
rest scenarios, which should be the common cases so should be good
enough.
- Hugetlb check is a bit hairy, as the page table check cannot identify
hugetlb pte or normal pte via trapping at set_pte_at(), because of the
current design where hugetlb maps every layers to pte_t... For example,
the default set_huge_pte_at() can invoke set_pte_at() directly and lose
the hugetlb context, treating it the same as a normal pte_t. So far it's
fine because we have huge_pte_uffd_wp() always equals to pte_uffd_wp() as
long as supported (x86 only). It'll be a bigger problem when we'll
define _PAGE_UFFD_WP differently at various pgtable levels, because then
one huge_pte_uffd_wp() per-arch will stop making sense first.. as of now
we can leave this for later too.
This patch also removes commit c2da319c2e altogether, as we have something
better now.
[1] https://lore.kernel.org/all/000000000000dce0530615c89210@google.com/
Link: https://lkml.kernel.org/r/20240417212549.2766883-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0a46ef234756dca04623b7591e8ebb3440622f0b ]
ext4_xattr_set_entry() creates new EA inodes while holding buffer lock
on the external xattr block. This is problematic as it nests all the
allocation locking (which acquires locks on other buffers) under the
buffer lock. This can even deadlock when the filesystem is corrupted and
e.g. quota file is setup to contain xattr block as data block. Move the
allocation of EA inode out of ext4_xattr_set_entry() into the callers.
Reported-by: syzbot+a43d4f48b8397d0e41a9@syzkaller.appspotmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240321162657.27420-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8208c41c43ad5e9b63dce6c45a73e326109ca658 ]
When allocating EA inode, quota accounting is done just before
ext4_xattr_inode_lookup_create(). Logically these two operations belong
together so just fold quota accounting into
ext4_xattr_inode_lookup_create(). We also make
ext4_xattr_inode_lookup_create() return the looked up / created inode to
convert the function to a more standard calling convention.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240209112107.10585-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: 0a46ef234756 ("ext4: do not create EA inode under buffer lock")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a97de7bff13b1cc825c1b1344eaed8d6c2d3e695 ]
syzbot reported rfcomm_sock_setsockopt_old() is copying data without
checking user input length.
BUG: KASAN: slab-out-of-bounds in copy_from_sockptr_offset
include/linux/sockptr.h:49 [inline]
BUG: KASAN: slab-out-of-bounds in copy_from_sockptr
include/linux/sockptr.h:55 [inline]
BUG: KASAN: slab-out-of-bounds in rfcomm_sock_setsockopt_old
net/bluetooth/rfcomm/sock.c:632 [inline]
BUG: KASAN: slab-out-of-bounds in rfcomm_sock_setsockopt+0x893/0xa70
net/bluetooth/rfcomm/sock.c:673
Read of size 4 at addr ffff8880209a8bc3 by task syz-executor632/5064
Fixes: 9f2c8a03fb ("Bluetooth: Replace RFCOMM link mode with security level")
Fixes: bb23c0ab82 ("Bluetooth: Add support for deferring RFCOMM connection setup")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6309863b31dd80317cd7d6824820b44e254e2a9c ]
copy_from_sockptr() helper is unsafe, unless callers
did the prior check against user provided optlen.
Too many callers get this wrong, lets add a helper to
fix them and avoid future copy/paste bugs.
Instead of :
if (optlen < sizeof(opt)) {
err = -EINVAL;
break;
}
if (copy_from_sockptr(&opt, optval, sizeof(opt)) {
err = -EFAULT;
break;
}
Use :
err = copy_safe_from_sockptr(&opt, sizeof(opt),
optval, optlen);
if (err)
break;
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240408082845.3957374-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 7a87441c9651 ("nfc: llcp: fix nfc_llcp_setsockopt() unsafe copies")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 68d6f4f3fbd9b1baae53e7cf33fb3362b5a21494 ]
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for
array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
While there, use struct_size() helper, instead of the open-coded
version.
[brauner@kernel.org: contains a fix by Edward for an OOB access]
Reported-by: syzbot+4139435cb1b34cf759c2@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Link: https://lore.kernel.org/r/tencent_A7845DD769577306D813742365E976E3A205@qq.com
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/ZgImCXTdGDTeBvSS@neat
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 59f2f841179aa6a0899cb9cf53659149a35749b7 ]
syzbot reported the following lock sequence:
cpu 2:
grabs timer_base lock
spins on bpf_lpm lock
cpu 1:
grab rcu krcp lock
spins on timer_base lock
cpu 0:
grab bpf_lpm lock
spins on rcu krcp lock
bpf_lpm lock can be the same.
timer_base lock can also be the same due to timer migration.
but rcu krcp lock is always per-cpu, so it cannot be the same lock.
Hence it's a false positive.
To avoid lockdep complaining move kfree_rcu() after spin_unlock.
Reported-by: syzbot+1fa663a2100308ab6eab@syzkaller.appspotmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240329171439.37813-1-alexei.starovoitov@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
