8 Removed functions:
[D] 'function void ftrace_ops_set_global_filter(ftrace_ops*)'
[D] 'function int ftrace_set_filter(ftrace_ops*, unsigned char*, int, int)'
[D] 'function int ftrace_set_filter_ip(ftrace_ops*, unsigned long int, int, int)'
[D] 'function void ftrace_set_global_filter(unsigned char*, int, int)'
[D] 'function void ftrace_set_global_notrace(unsigned char*, int, int)'
[D] 'function int ftrace_set_notrace(ftrace_ops*, unsigned char*, int, int)'
[D] 'function int register_ftrace_function(ftrace_ops*)'
[D] 'function int unregister_ftrace_function(ftrace_ops*)'
1 function with some sub-type change:
'struct module at module.h:331:1' changed:
type size hasn't changed
2 data member deletions:
'unsigned int module::num_ftrace_callsites', at offset 5984 (in bits) at module.h:458:1
'unsigned long int* module::ftrace_callsites', at offset 6016 (in bits) at module.h:459:1
there are data member changes:
'list_head module::source_list' offset changed from 6080 to 6016 (in bits) (by -64 bits)
'list_head module::target_list' offset changed from 6208 to 6144 (in bits) (by -64 bits)
'void ()* module::exit' offset changed from 6336 to 6272 (in bits) (by -64 bits)
'atomic_t module::refcnt' offset changed from 6400 to 6336 (in bits) (by -64 bits)
6766 impacted interfaces
'struct perf_event at perf_event.h:560:1' changed:
type size changed from 9024 to 7744 (in bits)
1 data member deletion:
'ftrace_ops perf_event::ftrace_ops', at offset 7616 (in bits) at perf_event.h:699:1
there are data member changes:
'list_head perf_event::sb_list' offset changed from 8896 to 7616 (in bits) (by -1280 bits)
36 impacted interfaces
'struct task_struct at sched.h:584:1' changed:
type size changed from 28160 to 27648 (in bits)
6 data member deletions:
'int task_struct::curr_ret_stack', at offset 18944 (in bits) at sched.h:1121:1
'int task_struct::curr_ret_depth', at offset 18976 (in bits) at sched.h:1122:1
'ftrace_ret_stack* task_struct::ret_stack', at offset 19008 (in bits) at sched.h:1125:1
'long long unsigned int task_struct::ftrace_timestamp', at offset 19072 (in bits) at sched.h:1128:1
'atomic_t task_struct::trace_overrun', at offset 19136 (in bits) at sched.h:1134:1
'atomic_t task_struct::tracing_graph_pause', at offset 19168 (in bits) at sched.h:1137:1
there are data member changes:
'unsigned long int task_struct::trace' offset changed from 19200 to 18944 (in bits) (by -256 bits)
'unsigned long int task_struct::trace_recursion' offset changed from 19264 to 19008 (in bits) (by -256 bits)
'mem_cgroup* task_struct::memcg_in_oom' offset changed from 19328 to 19072 (in bits) (by -256 bits)
'gfp_t task_struct::memcg_oom_gfp_mask' offset changed from 19392 to 19136 (in bits) (by -256 bits)
'int task_struct::memcg_oom_order' offset changed from 19424 to 19168 (in bits) (by -256 bits)
'unsigned int task_struct::memcg_nr_pages_over_high' offset changed from 19456 to 19200 (in bits) (by -256 bits)
'mem_cgroup* task_struct::active_memcg' offset changed from 19520 to 19264 (in bits) (by -256 bits)
'request_queue* task_struct::throttle_queue' offset changed from 19584 to 19328 (in bits) (by -256 bits)
'uprobe_task* task_struct::utask' offset changed from 19648 to 19392 (in bits) (by -256 bits)
'int task_struct::pagefault_disabled' offset changed from 19712 to 19456 (in bits) (by -256 bits)
'task_struct* task_struct::oom_reaper_list' offset changed from 19776 to 19520 (in bits) (by -256 bits)
'vm_struct* task_struct::stack_vm_area' offset changed from 19840 to 19584 (in bits) (by -256 bits)
'atomic_t task_struct::stack_refcount' offset changed from 19904 to 19648 (in bits) (by -256 bits)
'void* task_struct::security' offset changed from 19968 to 19712 (in bits) (by -256 bits)
'thread_struct task_struct::thread' offset changed from 20096 to 19840 (in bits) (by -256 bits)
7066 impacted interfaces
'struct trace_array at trace.h:202:1' changed:
type size changed from 2688 to 2112 (in bits)
6 data member deletions:
'ftrace_ops* trace_array::ops', at offset 1984 (in bits) at trace.h:266:1
'trace_pid_list* trace_array::function_pids', at offset 2048 (in bits) at trace.h:267:1
'list_head trace_array::func_probes', at offset 2112 (in bits) at trace.h:270:1
'list_head trace_array::mod_trace', at offset 2240 (in bits) at trace.h:271:1
'list_head trace_array::mod_notrace', at offset 2368 (in bits) at trace.h:272:1
'int trace_array::function_enabled', at offset 2496 (in bits) at trace.h:275:1
there are data member changes:
'int trace_array::time_stamp_abs_ref' offset changed from 2528 to 1952 (in bits) (by -576 bits)
'list_head trace_array::hist_vars' offset changed from 2560 to 1984 (in bits) (by -576 bits)
6 impacted interfaces
Fixes: 06604e8cef ("ANDROID: gki_defconfig: disable FUNCTION_TRACER")
Cc: Sami Tolvanen <samitolvanen@google.com>
Change-Id: I7a37ca44f71ee74bed02996e2a2d373b4f13cd2b
Signed-off-by: Matthias Maennich <maennich@google.com>
Remove CONFIG_FUNCTION_TRACER as it's not needed. Note that
CONFIG_FTRACE is still enabled by default.
Change-Id: Iaf1452937c72325871c1a49b85ba37b4bf136d2e
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
2 Removed functions:
[D] 'function void do_gettimeofday(timeval*)'
[D] 'function unsigned long int get_seconds()'
'struct llc_sap at llc.h:54:1' changed:
type size changed from 8576 to 8704 (in bits)
1 data member insertion:
'callback_head llc_sap::rcu', at offset 8576 (in bits) at llc.h:69:1
9 impacted interfaces:
function void llc_add_pack(int, void ()*)
function int llc_build_and_send_ui_pkt(llc_sap*, sk_buff*, unsigned char*, unsigned char)
function void llc_sap_close(llc_sap*)
function llc_sap* llc_sap_find(unsigned char)
function llc_sap* llc_sap_open(unsigned char, void ()*)
function datalink_proto* register_8022_client(unsigned char, void ()*)
function datalink_proto* register_snap_client(const unsigned char*, void ()*)
function void unregister_8022_client(datalink_proto*)
function void unregister_snap_client(datalink_proto*)
Change-Id: Ida6d19e93ee9bc0520f5f4beed855537b1611f87
Signed-off-by: Matthias Maennich <maennich@google.com>
The kernel ABI is determined by what vmlinux and the kernel modules are
exposing in their distribution. Hence, add IN_KERNEL_MODULES to the
distribution and ensure they have proper debug information.
Change-Id: Ia0ac6b8aa98fa28690acc1469c92c92e01f0fcbd
Signed-off-by: Matthias Maennich <maennich@google.com>
Changes in 4.19.85
KVM: x86: introduce is_pae_paging
MIPS: BCM63XX: fix switch core reset on BCM6368
scsi: core: Handle drivers which set sg_tablesize to zero
ax88172a: fix information leak on short answers
ipmr: Fix skb headroom in ipmr_get_route().
net: gemini: add missed free_netdev
net: usb: qmi_wwan: add support for Foxconn T77W968 LTE modules
slip: Fix memory leak in slip_open error path
ALSA: usb-audio: Fix missing error check at mixer resolution test
ALSA: usb-audio: not submit urb for stopped endpoint
ALSA: usb-audio: Fix incorrect NULL check in create_yamaha_midi_quirk()
ALSA: usb-audio: Fix incorrect size check for processing/extension units
Btrfs: fix log context list corruption after rename exchange operation
Input: ff-memless - kill timer in destroy()
Input: synaptics-rmi4 - fix video buffer size
Input: synaptics-rmi4 - disable the relative position IRQ in the F12 driver
Input: synaptics-rmi4 - do not consume more data than we have (F11, F12)
Input: synaptics-rmi4 - clear IRQ enables for F54
Input: synaptics-rmi4 - destroy F54 poller workqueue when removing
IB/hfi1: Ensure full Gen3 speed in a Gen4 system
IB/hfi1: Use a common pad buffer for 9B and 16B packets
i2c: acpi: Force bus speed to 400KHz if a Silead touchscreen is present
ecryptfs_lookup_interpose(): lower_dentry->d_inode is not stable
ecryptfs_lookup_interpose(): lower_dentry->d_parent is not stable either
net: ethernet: dwmac-sun8i: Use the correct function in exit path
iommu/vt-d: Fix QI_DEV_IOTLB_PFSID and QI_DEV_EIOTLB_PFSID macros
mm: mempolicy: fix the wrong return value and potential pages leak of mbind
mm: memcg: switch to css_tryget() in get_mem_cgroup_from_mm()
mm: hugetlb: switch to css_tryget() in hugetlb_cgroup_charge_cgroup()
mmc: sdhci-of-at91: fix quirk2 overwrite
iio: adc: max9611: explicitly cast gain_selectors
tee: optee: take DT status property into account
ath10k: fix kernel panic by moving pci flush after napi_disable
iio: dac: mcp4922: fix error handling in mcp4922_write_raw
clk: sunxi-ng: h6: fix PWM gate/reset offset
soundwire: Initialize completion for defer messages
soundwire: intel: Fix uninitialized adev deref
arm64: dts: allwinner: a64: Orange Pi Win: Fix SD card node
arm64: dts: allwinner: a64: Olinuxino: fix DRAM voltage
arm64: dts: allwinner: a64: NanoPi-A64: Fix DCDC1 voltage
ALSA: pcm: signedness bug in snd_pcm_plug_alloc()
soc/tegra: pmc: Fix pad voltage configuration for Tegra186
arm64: dts: tegra210-p2180: Correct sdmmc4 vqmmc-supply
y2038: make do_gettimeofday() and get_seconds() inline
ARM: dts: rcar: Correct SATA device sizes to 2 MiB
ARM: dts: at91/trivial: Fix USART1 definition for at91sam9g45
rtc: sysfs: fix NULL check in rtc_add_groups()
rtc: rv8803: fix the rv8803 id in the OF table
remoteproc/davinci: Use %zx for formating size_t
extcon: cht-wc: Return from default case to avoid warnings
cfg80211: Avoid regulatory restore when COUNTRY_IE_IGNORE is set
ALSA: seq: Do error checks at creating system ports
ath10k: skip resetting rx filter for WCN3990
ath9k: fix tx99 with monitor mode interface
wil6210: drop Rx multicast packets that are looped-back to STA
wil6210: set edma variables only for Talyn-MB devices
wil6210: prevent usage of tx ring 0 for eDMA
wil6210: fix invalid memory access for rx_buff_mgmt debugfs
ath10k: limit available channels via DT ieee80211-freq-limit
ice: Update request resource command to latest specification
ice: Prevent control queue operations during reset
gfs2: Don't set GFS2_RDF_UPTODATE when the lvb is updated
ice: Fix and update driver version string
ASoC: dapm: Don't fail creating new DAPM control on NULL pinctrl
ASoC: dpcm: Properly initialise hw->rate_max
ASoC: meson: axg-fifo: report interrupt request failure
ASoC: AMD: Change MCLK to 48Mhz
pinctrl: ingenic: Probe driver at subsys_initcall
MIPS: BCM47XX: Enable USB power on Netgear WNDR3400v3
ARM: dts: exynos: Use i2c-gpio for HDMI-DDC on Arndale
ARM: dts: exynos: Fix HDMI-HPD line handling on Arndale
ARM: dts: exynos: Fix sound in Snow-rev5 Chromebook
liquidio: fix race condition in instruction completion processing
arm64: dts: stratix10: i2c clock running out of spec
ARM: dts: exynos: Fix regulators configuration on Peach Pi/Pit Chromebooks
i40evf: Validate the number of queues a PF sends
i40e: use correct length for strncpy
i40evf: set IFF_UNICAST_FLT flag for the VF
i40e: Check and correct speed values for link on open
i40evf: Don't enable vlan stripping when rx offload is turned on
i40e: hold the rtnl lock on clearing interrupt scheme
i40evf: cancel workqueue sync for adminq when a VF is removed
i40e: Prevent deleting MAC address from VF when set by PF
IB/rxe: avoid back-to-back retries
IB/rxe: fixes for rdma read retry
iwlwifi: drop packets with bad status in CD
iwlwifi: don't WARN on trying to dump dead firmware
iwlwifi: mvm: avoid sending too many BARs
media: vicodec: fix out-of-range values when decoding
media: i2c: Fix pm_runtime_get_if_in_use() usage in sensor drivers
media: ov772x: Disable clk on error path
ARM: dts: pxa: fix the rtc controller
ARM: dts: pxa: fix power i2c base address
rtl8187: Fix warning generated when strncpy() destination length matches the sixe argument
mwifiex: do no submit URB in suspended state
mwifex: free rx_cmd skb in suspended state
brcmfmac: fix wrong strnchr usage
mt76: Fix comparisons with invalid hardware key index
soc: imx: gpc: fix PDN delay
ASoC: rsnd: ssi: Fix issue in dma data address assignment
net: hns3: Fix for multicast failure
net: hns3: Fix error of checking used vlan id
net: hns3: Fix for loopback selftest failed problem
net: hns3: Change the dst mac addr of loopback packet
net/mlx5: Fix atomic_mode enum values
net: phy: mscc: read 'vsc8531,vddmac' as an u32
net: phy: mscc: read 'vsc8531, edge-slowdown' as an u32
ARM: dts: meson8: fix the clock controller register size
ARM: dts: meson8b: fix the clock controller register size
mtd: rawnand: marvell: use regmap_update_bits() for syscon access
mtd: rawnand: fsl_ifc: check result of SRAM initialization
mtd: rawnand: fsl_ifc: fixup SRAM init for newer ctrl versions
mtd: rawnand: qcom: don't include dma-direct.h
IB/mlx5: Change TX affinity assignment in RoCE LAG mode
qxl: fix null-pointer crash during suspend
mac80211: fix saving a few HE values
cfg80211: validate wmm rule when setting
f2fs: avoid wrong decrypted data from disk
net: lan78xx: Bail out if lan78xx_get_endpoints fails
rtnetlink: move type calculation out of loop
ASoC: sgtl5000: avoid division by zero if lo_vag is zero
ath10k: avoid possible memory access violation
ARM: dts: exynos: Disable pull control for S5M8767 PMIC
ath10k: wmi: disable softirq's while calling ieee80211_rx
i2c: mediatek: Use DMA safe buffers for i2c transactions
IB/mlx5: Don't hold spin lock while checking device state
IB/ipoib: Ensure that MTU isn't less than minimum permitted
RDMA/core: Rate limit MAD error messages
RDMA/core: Follow correct unregister order between sysfs and cgroup
mips: txx9: fix iounmap related issue
udf: Fix crash during mount
ASoC: dapm: Avoid uninitialised variable warning
ASoC: Intel: hdac_hdmi: Limit sampling rates at dai creation
ata: Disable AHCI ALPM feature for Ampere Computing eMAG SATA
of: make PowerMac cache node search conditional on CONFIG_PPC_PMAC
ARM: dts: omap3-gta04: give spi_lcd node a label so that we can overwrite in other DTS files
ARM: dts: omap3-gta04: fixes for tvout / venc
ARM: dts: omap3-gta04: tvout: enable as display1 alias
ARM: dts: omap3-gta04: fix touchscreen tsc2007
ARM: dts: omap3-gta04: make NAND partitions compatible with recent U-Boot
ARM: dts: omap3-gta04: keep vpll2 always on
f2fs: submit bio after shutdown
failover: Fix error return code in net_failover_create
sched/debug: Explicitly cast sched_feat() to bool
sched/debug: Use symbolic names for task state constants
firmware: arm_scmi: use strlcpy to ensure NULL-terminated strings
arm64: dts: rockchip: Fix VCC5V0_HOST_EN on rk3399-sapphire
ARM: dts: exynos: Disable pull control for PMIC IRQ line on Artik5 board
usb: mtu3: disable vbus rise/fall interrupts of ltssm
dmaengine: dma-jz4780: Don't depend on MACH_JZ4780
dmaengine: dma-jz4780: Further residue status fix
EDAC, sb_edac: Return early on ADDRV bit and address type test
rtc: mt6397: fix possible race condition
rtc: pl030: fix possible race condition
ath9k: add back support for using active monitor interfaces for tx99
dmaengine: at_xdmac: remove a stray bottom half unlock
RDMA/hns: Fix an error code in hns_roce_v2_init_eq_table()
IB/hfi1: Missing return value in error path for user sdma
signal: Always ignore SIGKILL and SIGSTOP sent to the global init
signal: Properly deliver SIGILL from uprobes
signal: Properly deliver SIGSEGV from x86 uprobes
f2fs: fix memory leak of write_io in fill_super()
f2fs: fix memory leak of percpu counter in fill_super()
f2fs: fix setattr project check upon fssetxattr ioctl
scsi: qla2xxx: Use correct qpair for ABTS/CMD
scsi: qla2xxx: Fix iIDMA error
scsi: qla2xxx: Defer chip reset until target mode is enabled
scsi: qla2xxx: Terminate Plogi/PRLI if WWN is 0
scsi: qla2xxx: Fix deadlock between ATIO and HW lock
scsi: qla2xxx: Increase abort timeout value
scsi: qla2xxx: Check for Register disconnect
scsi: qla2xxx: Fix port speed display on chip reset
scsi: qla2xxx: Fix dropped srb resource.
scsi: qla2xxx: Fix duplicate switch's Nport ID entries
scsi: lpfc: Fix GFT_ID and PRLI logic for RSCN
scsi: lpfc: Correct invalid EQ doorbell write on if_type=6
scsi: lpfc: Fix errors in log messages.
scsi: sym53c8xx: fix NULL pointer dereference panic in sym_int_sir()
ARM: imx6: register pm_power_off handler if "fsl,pmic-stby-poweroff" is set
scsi: pm80xx: Corrected dma_unmap_sg() parameter
scsi: pm80xx: Fixed system hang issue during kexec boot
kprobes: Don't call BUG_ON() if there is a kprobe in use on free list
net: aquantia: fix hw_atl_utils_fw_upload_dwords
Drivers: hv: vmbus: Fix synic per-cpu context initialization
nvmem: core: return error code instead of NULL from nvmem_device_get
media: dt-bindings: adv748x: Fix decimal unit addresses
ALSA: hda: Fix implicit definition of pci_iomap() on SH
media: fix: media: pci: meye: validate offset to avoid arbitrary access
media: dvb: fix compat ioctl translation
net: bcmgenet: Fix speed selection for reverse MII
arm64: dts: meson: libretech: update board model
arm64: dts: meson-axg: use the proper compatible for ethmac
ALSA: intel8x0m: Register irq handler after register initializations
arm64: dts: renesas: salvator-common: adv748x: Override secondary addresses
arm64: dts: renesas: r8a77965: Attach the SYS-DMAC to the IPMMU
arm64: dts: renesas: r8a77965: Fix HS-USB compatible
arm64: dts: renesas: r8a77965: Fix clock/reset for usb2_phy1
pinctrl: at91-pio4: fix has_config check in atmel_pctl_dt_subnode_to_map()
llc: avoid blocking in llc_sap_close()
ARM: dts: qcom: ipq4019: fix cpu0's qcom,saw2 reg value
soc: qcom: geni: Don't ignore clk_round_rate() errors in geni_se_clk_tbl_get()
soc: qcom: geni: geni_se_clk_freq_match() should always accept multiples
soc: qcom: wcnss_ctrl: Avoid string overflow
soc: qcom: apr: Avoid string overflow
drivers: qcom: rpmh-rsc: clear wait_for_compl after use
arm64: dts: broadcom: Fix I2C and SPI bus warnings
ARM: dts: bcm: Fix SPI bus warnings
ARM: dts: aspeed: Fix I2C bus warnings
powerpc/vdso: Correct call frame information
ARM: dts: socfpga: Fix I2C bus unit-address error
ARM: dts: sunxi: Fix I2C bus warnings
pinctrl: at91: don't use the same irqchip with multiple gpiochips
ARM: dts: sun9i: Fix I2C bus warnings
android: binder: no outgoing transaction when thread todo has transaction
cxgb4: Fix endianness issue in t4_fwcache()
arm64: fix for bad_mode() handler to always result in panic
block, bfq: inject other-queue I/O into seeky idle queues on NCQ flash
blok, bfq: do not plug I/O if all queues are weight-raised
arm64: dts: meson: Fix erroneous SPI bus warnings
power: supply: ab8500_fg: silence uninitialized variable warnings
power: reset: at91-poweroff: do not procede if at91_shdwc is allocated
power: supply: max8998-charger: Fix platform data retrieval
component: fix loop condition to call unbind() if bind() fails
kernfs: Fix range checks in kernfs_get_target_path
ip_gre: fix parsing gre header in ipgre_err
scsi: ufshcd: Fix NULL pointer dereference for in ufshcd_init
ARM: dts: rockchip: Fix erroneous SPI bus dtc warnings on rk3036
arm64: dts: rockchip: Fix I2C bus unit-address error on rk3399-puma-haikou
ACPI / LPSS: Exclude I2C busses shared with PUNIT from pmc_atom_d3_mask
netfilter: nf_tables: avoid BUG_ON usage
ath9k: Fix a locking bug in ath9k_add_interface()
s390/qeth: uninstall IRQ handler on device removal
s390/qeth: invoke softirqs after napi_schedule()
media: vsp1: Fix vsp1_regs.h license header
media: vsp1: Fix YCbCr planar formats pitch calculation
media: ov2680: don't register the v4l2 subdevice before checking chip ID
PCI/ACPI: Correct error message for ASPM disabling
net: socionext: Fix two sleep-in-atomic-context bugs in ave_rxfifo_reset()
PCI: mediatek: Fix unchecked return value
ARM: dts: xilinx: Fix I2C and SPI bus warnings
serial: uartps: Fix suspend functionality
serial: samsung: Enable baud clock for UART reset procedure in resume
serial: mxs-auart: Fix potential infinite loop
tty: serial: qcom_geni_serial: Fix serial when not used as console
arm64: dts: ti: k3-am65: Change #address-cells and #size-cells of interconnect to 2
samples/bpf: fix a compilation failure
spi/bcm63xx-hsspi: keep pll clk enabled
spi: mediatek: Don't modify spi_transfer when transfer.
ASoC: rt5682: Fix the boost volume at the begining of playback
ipmi_si_pci: fix NULL device in ipmi_si error message
ipmi_si: fix potential integer overflow on large shift
ipmi:dmi: Ignore IPMI SMBIOS entries with a zero base address
ipmi: fix return value of ipmi_set_my_LUN
net: hns3: fix return type of ndo_start_xmit function
net: cavium: fix return type of ndo_start_xmit function
net: ibm: fix return type of ndo_start_xmit function
powerpc/iommu: Avoid derefence before pointer check
selftests/powerpc: Do not fail with reschedule
powerpc/64s/hash: Fix stab_rr off by one initialization
powerpc/pseries/memory-hotplug: Only update DT once per memory DLPAR request
powerpc/pseries: Disable CPU hotplug across migrations
powerpc: Fix duplicate const clang warning in user access code
RDMA/i40iw: Fix incorrect iterator type
ARM: dts: atmel: Fix I2C and SPI bus warnings
OPP: Protect dev_list with opp_table lock
of/unittest: Fix I2C bus unit-address error
libfdt: Ensure INT_MAX is defined in libfdt_env.h
power: supply: twl4030_charger: fix charging current out-of-bounds
power: supply: twl4030_charger: disable eoc interrupt on linear charge
net: mvpp2: fix the number of queues per cpu for PPv2.2
net: marvell: fix return type of ndo_start_xmit function
net: toshiba: fix return type of ndo_start_xmit function
net: xilinx: fix return type of ndo_start_xmit function
net: broadcom: fix return type of ndo_start_xmit function
net: amd: fix return type of ndo_start_xmit function
net: sun: fix return type of ndo_start_xmit function
net: hns3: Fix for setting speed for phy failed problem
net: hns3: Fix cmdq registers initialization issue for vf
net: hns3: Clear client pointer when initialize client failed or unintialize finished
net: hns3: Fix client initialize state issue when roce client initialize failed
net: hns3: Fix parameter type for q_id in hclge_tm_q_to_qs_map_cfg()
nfp: provide a better warning when ring allocation fails
usb: chipidea: imx: enable OTG overcurrent in case USB subsystem is already started
usb: chipidea: Fix otg event handler
usb: usbtmc: Fix ioctl USBTMC_IOCTL_ABORT_BULK_OUT
s390/zcrypt: enable AP bus scan without a valid default domain
s390/vdso: avoid 64-bit vdso mapping for compat tasks
s390/vdso: correct CFI annotations of vDSO functions
brcmfmac: increase buffer for obtaining firmware capabilities
brcmsmac: Use kvmalloc() for ucode allocations
mlxsw: spectrum: Init shaper for TCs 8..15
PCI: portdrv: Initialize service drivers directly
ARM: dts: am335x-evm: fix number of cpsw
ARM: dts: ti: Fix SPI and I2C bus warnings
f2fs: avoid infinite loop in f2fs_alloc_nid
f2fs: fix to recover inode's uid/gid during POR
ARM: dts: ux500: Correct SCU unit address
ARM: dts: ux500: Fix LCDA clock line muxing
ARM: dts: ste: Fix SPI controller node names
spi: pic32: Use proper enum in dmaengine_prep_slave_rg
crypto: chacha20 - Fix chacha20_block() keystream alignment (again)
cpufeature: avoid warning when compiling with clang
crypto: arm/crc32 - avoid warning when compiling with Clang
ARM: dts: marvell: Fix SPI and I2C bus warnings
x86/mce-inject: Reset injection struct after injection
ARM: dts: stm32: enable display on stm32mp157c-ev1 board
ARM: dts: clearfog: fix sdhci supply property name
ARM: dts: stm32: Fix SPI controller node names
bnx2x: Ignore bandwidth attention in single function mode
PCI/AER: Take reference on error devices
PCI/AER: Don't read upstream ports below fatal errors
PCI/ERR: Use slot reset if available
samples/bpf: fix compilation failure
net: phy: mdio-bcm-unimac: Allow configuring MDIO clock divider
net: micrel: fix return type of ndo_start_xmit function
net: freescale: fix return type of ndo_start_xmit function
x86/CPU: Use correct macros for Cyrix calls
x86/CPU: Change query logic so CPUID is enabled before testing
EDAC: Correct DIMM capacity unit symbol
MIPS: kexec: Relax memory restriction
arm64: dts: rockchip: Fix microSD in rk3399 sapphire board
mlxsw: Make MLXSW_SP1_FWREV_MINOR a hard requirement
media: imx: work around false-positive warning, again
media: pci: ivtv: Fix a sleep-in-atomic-context bug in ivtv_yuv_init()
media: au0828: Fix incorrect error messages
media: davinci: Fix implicit enum conversion warning
ARM: dts: rockchip: explicitly set vcc_sd0 pin to gpio on rk3188-radxarock
usb: gadget: uvc: configfs: Drop leaked references to config items
usb: gadget: uvc: configfs: Prevent format changes after linking header
usb: gadget: uvc: configfs: Sort frame intervals upon writing
ARM: dts: exynos: Correct audio subsystem parent clock on Peach Chromebooks
i2c: aspeed: fix invalid clock parameters for very large divisors
gpiolib: Fix gpio_direction_* for single direction GPIOs
ARM: at91: pm: call put_device instead of of_node_put in at91_pm_config_ws
phy: brcm-sata: allow PHY_BRCM_SATA driver to be built for DSL SoCs
phy: renesas: rcar-gen3-usb2: fix vbus_ctrl for role sysfs
phy: phy-twl4030-usb: fix denied runtime access
ARM: dts: imx6ull: update vdd_soc voltage for 900MHz operating point
usb: gadget: uvc: Factor out video USB request queueing
usb: gadget: uvc: Only halt video streaming endpoint in bulk mode
coresight: Use ERR_CAST instead of ERR_PTR
coresight: Fix handling of sinks
coresight: perf: Fix per cpu path management
coresight: perf: Disable trace path upon source error
coresight: tmc-etr: Handle driver mode specific ETR buffers
coresight: etm4x: Configure EL2 exception level when kernel is running in HYP
coresight: tmc: Fix byte-address alignment for RRP
coresight: dynamic-replicator: Handle multiple connections
slimbus: ngd: register ngd driver only once.
slimbus: ngd: return proper error code instead of zero
silmbus: ngd: register controller after power up.
misc: kgdbts: Fix restrict error
misc: genwqe: should return proper error value.
vmbus: keep pointer to ring buffer page
vfio/pci: Fix potential memory leak in vfio_msi_cap_len
vfio/pci: Mask buggy SR-IOV VF INTx support
iw_cxgb4: Use proper enumerated type in c4iw_bar2_addrs
scsi: libsas: always unregister the old device if going to discover new
f2fs: fix remount problem of option io_bits
phy: lantiq: Fix compile warning
arm64: dts: fsl: Fix I2C and SPI bus warnings
ARM: dts: imx51-zii-rdu1: Fix the rtc compatible string
arm64: tegra: I2C on Tegra194 is not compatible with Tegra114
ARM: dts: tegra30: fix xcvr-setup-use-fuses
ARM: dts: tegra20: restore address order
ARM: tegra: apalis_t30: fix mmc1 cmd pull-up
ARM: tegra: apalis_t30: fix mcp2515 can controller interrupt polarity
ARM: tegra: colibri_t30: fix mcp2515 can controller interrupt polarity
ARM: dts: paz00: fix wakeup gpio keycode
net: smsc: fix return type of ndo_start_xmit function
net: faraday: fix return type of ndo_start_xmit function
PCI/ERR: Run error recovery callbacks for all affected devices
f2fs: update i_size after DIO completion
f2fs: fix to recover inode's project id during POR
f2fs: mark inode dirty explicitly in recover_inode()
RDMA: Fix dependencies for rdma_user_mmap_io
EDAC: Raise the maximum number of memory controllers
ARM: dts: realview: Fix SPI controller node names
firmware: dell_rbu: Make payload memory uncachable
Bluetooth: hci_serdev: clear HCI_UART_PROTO_READY to avoid closing proto races
Bluetooth: L2CAP: Detect if remote is not able to use the whole MPS
Bluetooth: btrsi: fix bt tx timeout issue
x86/hyperv: Suppress "PCI: Fatal: No config space access function found"
crypto: s5p-sss: Fix race in error handling
crypto: s5p-sss: Fix Fix argument list alignment
crypto: fix a memory leak in rsa-kcs1pad's encryption mode
iwlwifi: dbg: don't crash if the firmware crashes in the middle of a debug dump
iwlwifi: fix non_shared_ant for 22000 devices
iwlwifi: pcie: read correct prph address for newer devices
iwlwifi: api: annotate compressed BA notif array sizes
iwlwifi: pcie: gen2: build A-MSDU only for GSO
iwlwifi: pcie: fit reclaim msg to MAX_MSG_LEN
iwlwifi: mvm: use correct FIFO length
iwlwifi: mvm: Allow TKIP for AP mode
scsi: NCR5380: Clear all unissued commands on host reset
scsi: NCR5380: Have NCR5380_select() return a bool
scsi: NCR5380: Withhold disconnect privilege for REQUEST SENSE
scsi: NCR5380: Use DRIVER_SENSE to indicate valid sense data
scsi: NCR5380: Check for invalid reselection target
scsi: NCR5380: Don't clear busy flag when abort fails
scsi: NCR5380: Don't call dsprintk() following reselection interrupt
scsi: NCR5380: Handle BUS FREE during reselection
scsi: NCR5380: Check for bus reset
arm64: dts: amd: Fix SPI bus warnings
arm64: dts: lg: Fix SPI controller node names
ARM: dts: lpc32xx: Fix SPI controller node names
rtc: isl1208: avoid possible sysfs race
rtc: tx4939: fixup nvmem name and register size
rtc: armada38x: fix possible race condition
netfilter: masquerade: don't flush all conntracks if only one address deleted on device
usb: xhci-mtk: fix ISOC error when interval is zero
usb: usbtmc: uninitialized symbol 'actual' in usbtmc_ioctl_clear
fuse: use READ_ONCE on congestion_threshold and max_background
IB/iser: Fix possible NULL deref at iser_inv_desc()
media: ov2680: fix null dereference at power on
s390/vdso: correct vdso mapping for compat tasks
net: phy: mdio-bcm-unimac: mark PM functions as __maybe_unused
memfd: Use radix_tree_deref_slot_protected to avoid the warning.
slcan: Fix memory leak in error path
Linux 4.19.85
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I0857e66ee2cdd412cd736548a1395bf764a8ab0a
The commit 99b45e7a1b ("memfd: Fix locking when tagging pins")
introduces the following warning messages.
*WARNING: suspicious RCU usage in memfd_wait_for_pins*
It is because we still use radix_tree_deref_slot without read_rcu_lock.
We should use radix_tree_deref_slot_protected instead in the case.
Cc: stable@vger.kernel.org
Fixes: 99b45e7a1b ("memfd: Fix locking when tagging pins")
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9b97123a58 ]
The newly added runtime-pm support causes a harmless warning
when CONFIG_PM is disabled:
drivers/net/phy/mdio-bcm-unimac.c:330:12: error: 'unimac_mdio_resume' defined but not used [-Werror=unused-function]
static int unimac_mdio_resume(struct device *d)
drivers/net/phy/mdio-bcm-unimac.c:321:12: error: 'unimac_mdio_suspend' defined but not used [-Werror=unused-function]
static int unimac_mdio_suspend(struct device *d)
Marking the functions as __maybe_unused is the easiest workaround
and avoids adding #ifdef checks.
Fixes: b78ac6ecd1 ("net: phy: mdio-bcm-unimac: Allow configuring MDIO clock divider")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 190f056fba ]
While "s390/vdso: avoid 64-bit vdso mapping for compat tasks" fixed
64-bit vdso mapping for compat tasks under gdb it introduced another
problem. "compat_mm" flag is not inherited during fork and when
31-bit process forks a child (but does not perform exec) it ends up
with 64-bit vdso. To address that, init_new_context (which is called
during fork and exec) now initialize compat_mm based on thread TIF_31BIT
flag. Later compat_mm is adjusted in arch_setup_additional_pages, which
is called during exec.
Fixes: d1befa6582 ("s390/vdso: avoid 64-bit vdso mapping for compat tasks")
Reported-by: Stefan Liebler <stli@linux.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: <stable@vger.kernel.org> # v4.20+
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c45fbdf24c ]
Swapping the order between v4l2 subdevice registration and checking chip
id in b7a417628a ("media: ov2680: don't register the v4l2 subdevice
before checking chip ID") makes the mode restore to use the sensor
controls before they are set, so move the mode restore call to s_power
after the handler setup for controls is done.
This remove also the need for the error code path in power on function.
Fixes: b7a417628a ("media: ov2680: don't register the v4l2 subdevice before checking chip ID")
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 65f07f5a09 ]
In case target remote invalidates bogus rkey and signature is not used,
pi_ctx is NULL deref.
The commit also fails the connection on bogus remote invalidation.
Fixes: 59caaed7a7 ("IB/iser: Support the remote invalidation exception")
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2a23f2b8ad ]
Since they are of unsigned int type, it's allowed to read them
unlocked during reporting to userspace. Let's underline this fact
with READ_ONCE() macroses.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9a83190300 ]
Fix uninitialized symbol 'actual' in function usbtmc_ioctl_clear.
When symbol 'actual' is not initialized and usb_bulk_msg() fails,
the subsequent kernel debug message shows a random value.
Signed-off-by: Guido Kiener <guido.kiener@rohde-schwarz.com>
Fixes: dfee02ac4b ("usb: usbtmc: Fix ioctl USBTMC_IOCTL_CLEAR")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 097f95d319 ]
We configured iptables as below, which only allowed incoming data on
established connections:
iptables -t mangle -A PREROUTING -m state --state ESTABLISHED -j ACCEPT
iptables -t mangle -P PREROUTING DROP
When deleting a secondary address, current masquerade implements would
flush all conntracks on this device. All the established connections on
primary address also be deleted, then subsequent incoming data on the
connections would be dropped wrongly because it was identified as NEW
connection.
So when an address was delete, it should only flush connections related
with the address.
Signed-off-by: Tan Hu <tan.hu@zte.com.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7d61cbb945 ]
The IRQ is requested before the struct rtc is allocated and registered, but
this struct is used in the IRQ handler. This may lead to a NULL pointer
dereference.
Switch to devm_rtc_allocate_device/rtc_register_device to allocate the rtc
before requesting the IRQ.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2ab78755e9 ]
The default word_size and stride of 1 are correct for the tx4939. Also fix
the nvmem folder name.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1b4c794fda ]
Use rtc_add_group to add the common sysfs group to avoid a possible race
condition.
[Denis.Osterland@diehl.com: use to_i2c_client(dev->parent)]
Signed-off-by: Denis Osterland <Denis.Osterland@diehl.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The move of atrim, dtrim usr sysfs properties from i2c device
to rtc device require to access them via dev->parent.
This patch also aligns timestamp0.
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 09bae3b64c ]
SPI controller nodes should be named 'spi' rather than 'ssp'. Fixing the
name enables dtc SPI bus checks.
Cc: Chanho Min <chanho.min@lge.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e9f0878c4b ]
dtc has new checks for SPI buses. Fix the warnings in node names.
arch/arm64/boot/dts/amd/amd-overdrive.dtb: Warning (spi_bus_bridge): /smb/ssp@e1030000: node name for SPI buses should be 'spi'
arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dtb: Warning (spi_bus_bridge): /smb/ssp@e1030000: node name for SPI buses should be 'spi'
arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dtb: Warning (spi_bus_bridge): /smb/ssp@e1030000: node name for SPI buses should be 'spi'
Cc: Brijesh Singh <brijeshkumar.singh@amd.com>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b0e87a6aa ]
The SR_RST bit isn't latched. Hence, detecting a bus reset isn't reliable.
When it is detected, the right thing to do is to drop all connected and
disconnected commands. The code for that is already present so refactor it and
call it when SR_RST is set.
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca694afad7 ]
The X3T9.2 specification (draft) says, under "6.1.4.2 RESELECTION time-out
procedure", that a target may assert RST or go to BUS FREE phase if the
initiator does not respond within 200 us. Something like this has been
observed with AztecMonster II target. When it happens, all we can do is wait
for the target to try again.
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 08267216b3 ]
The X3T9.2 specification (draft) says, under "6.1.4.1 RESELECTION",
... The reselected initiator shall then assert the BSY signal
within a selection abort time of its most recent detection of being
reselected; this is required for correct operation of the time-out
procedure.
The selection abort time is only 200 us which may be insufficient time for a
printk() call. Move the diagnostics to the error paths.
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 45ddc1b248 ]
When NCR5380_abort() returns FAILED, the driver forgets that the target is
still busy. Hence, further commands may be sent to the target, which may fail
during selection and produce the error message, "reselection after won
arbitration?". Prevent this by leaving the busy flag set when NCR5380_abort()
fails.
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7ef55f6744 ]
The X3T9.2 specification (draft) says, under "6.1.4.1 RESELECTION", that "the
initiator shall not respond to a RESELECTION phase if other than two SCSI ID
bits are on the DATA BUS." This issue (too many bits set) has been observed in
the wild, so add a check.
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0703565139 ]
When sense data is valid, call set_driver_byte(cmd, DRIVER_SENSE). Otherwise
some callers of scsi_execute() will ignore sense data. Don't set DID_ERROR or
DID_RESET just because sense data is missing.
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6f3df8c119 ]
Support for setting keys for TKIP cipher suite was mistakenly removed
for AP mode. Fix this.
Fixes: 85aeb58cec ("iwlwifi: mvm: Enable security on new TX API")
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7126b6f2bb ]
Current FIFO size calculation is wrong for two reasons:
- We access lmac 0 by default
- We don't take 11ax into consideration.
Fix both.
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 81f0c66187 ]
Today, the length of a debug message in iwl_trans_pcie_reclaim
may pass the MAX_MSG_LEN, which is 110.
An example for this kind of message is:
'iwl_trans_pcie_reclaim: Read index for DMA queue txq id (2),
last_to_free 65535 is out of range [0-65536] 2 2.'
Cut the message a bit so it will fit the allowed MAX_MSG_LEN.
Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 53f474e6a8 ]
If the incoming frame should be an A-MSDU, it may already be one,
for example in the case of NAN multicast being encapsulated in an
A-MSDU. Thus, use the GSO algorithm to build A-MSDU only if the
skb actually contains GSO data.
Fixes: 6ffe5de35b ("iwlwifi: pcie: add AMSDU to gen2")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6f68cc367a ]
Annotate the compressed BA notification array sizes and
make both of them 0-length since the length of 1 is just
confusing - it may be different than that and the offset
to the second one needs to be calculated in the C code
anyhow.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 84fb372c89 ]
For newer devices we have higher range of periphery
addresses. Currently it is masked out, so we end up
reading another address.
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 79f25b10c9 ]
We can dump data from the firmware either when it crashes,
or when the firmware is alive.
Not all the data is available if the firmware is running
(like the Tx / Rx FIFOs which are available only when the
firmware is halted), so we first check that the firmware
is alive to compute the required size for the dump and then
fill the buffer with the data.
When we allocate the buffer, we test the STATUS_FW_ERROR
bit to check if the firmware is alive or not. This bit
can be changed during the course of the dump since it is
modified in the interrupt handler.
We hit a case where we allocate the buffer while the
firmware is sill working, and while we start to fill the
buffer, the firmware crashes. Then we test STATUS_FW_ERROR
again and decide to fill the buffer with data like the
FIFOs even if no room was allocated for this data in the
buffer. This means that we overflow the buffer that was
allocated leading to memory corruption.
To fix this, test the STATUS_FW_ERROR bit only once and
rely on local variables to check if we should dump fifos
or other firmware components.
Fixes: 04fd2c2822 ("iwlwifi: mvm: add rxf and txf to dump data")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5842cd4478 ]
Remove a race condition introduced by error path in functions:
s5p_aes_interrupt and s5p_aes_crypt_start. Setting the busy field of
struct s5p_aes_dev to false made it possible for s5p_tasklet_cb to
change the req field, before s5p_aes_complete was called.
Change the first parameter of s5p_aes_complete to struct
ablkcipher_request. Before spin_unlock, make a copy of the currently
handled request, to ensure s5p_aes_complete function call with the
correct request.
Signed-off-by: Christoph Manszewski <c.manszewski@samsung.com>
Acked-by: Kamil Konieczny <k.konieczny@partner.samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7cbfd1e2aa ]
observed sometimes data is coming with unaligned address from kernel
BT stack. If unaligned address is passed, some data in payload is
stripped when packet is loading to firmware and this results, BT
connection timeout is happening.
sh# hciconfig hci0 up
Can't init device hci0: hci0 command 0x0c03 tx timeout
Fixed this by moving the data to aligned address.
Signed-off-by: Sanjay Kumar Konduri <sanjay.konduri@redpinesignals.com>
Signed-off-by: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a5c3021bb6 ]
If the remote is not able to fully utilize the MPS choosen recalculate
the credits based on the actual amount it is sending that way it can
still send packets of MTU size without credits dropping to 0.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7cf7846d27 ]
Clearing HCI_UART_PROTO_READY will avoid usage of proto function pointers
before running the proto close function pointer. There is chance of kernel
crash, due to usage of non proto close function pointers after proto close.
Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6aecee6ad4 ]
The dell_rbu driver takes firmware update payloads and puts them in memory so
the system BIOS can find them after a reboot. This sometimes fails (though
rarely), because the memory containing the payload is in the CPU cache but
never gets written back to main memory before the system is rebooted (CPU
cache contents are lost on reboot).
With this patch, the payload memory will be changed to uncachable to ensure
that the payload is actually in main memory before the system is rebooted.
Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b58859419 ]
We observe an oops in the skx_edac module during boot:
EDAC MC0: Giving out device to module skx_edac controller Skylake Socket#0 IMC#0
EDAC MC1: Giving out device to module skx_edac controller Skylake Socket#0 IMC#1
EDAC MC2: Giving out device to module skx_edac controller Skylake Socket#1 IMC#0
...
EDAC MC13: Giving out device to module skx_edac controller Skylake Socket#0 IMC#1
EDAC MC14: Giving out device to module skx_edac controller Skylake Socket#1 IMC#0
EDAC MC15: Giving out device to module skx_edac controller Skylake Socket#1 IMC#1
Too many memory controllers: 16
EDAC MC: Removed device 0 for skx_edac Skylake Socket#0 IMC#0
We observe there are two memory controllers per socket, with a limit
of 16. Raise the maximum number of memory controllers from 16 to 2 *
MAX_NUMNODES (1024).
[ bp: This is just a band-aid fix until we've sorted out the whole issue
with the bus_type association and handling in EDAC and can get rid of
this arbitrary limit. ]
Signed-off-by: Justin Ernst <justin.ernst@hpe.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Russ Anderson <russ.anderson@hpe.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-edac@vger.kernel.org
Link: https://lkml.kernel.org/r/20180925143449.284634-1-justin.ernst@hpe.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
