[ Upstream commit ee0285e134 ]
When dynamically switching lanes was removed, the intent of the code
was to check to make sure that higher speed items used 4 lanes, but
it had the unintended consequence of removing the slower speeds for
4-lane users.
This attempts to remedy this by doing a check to see that the
max frequency doesn't exceed the chip limit, and a second
check to make sure that the max bit-rate doesn't exceed the
number of lanes * max bit rate / lane.
Fixes: 9a0cdcd664 ("drm/bridge: adv7533: remove dynamic lane switching from adv7533 bridge")
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230319125524.58803-1-aford173@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eed9496a05 ]
The buf[4] value comes from the user via ts_play(). It is a value in
the u8 range. The final length we pass to av7110_ipack_instant_repack()
is "len - (buf[4] + 1) - 4" so add a check to ensure that the length is
not negative. It's not clear that passing a negative len value does
anything bad necessarily, but it's not best practice.
With the new bounds checking the "if (!len)" condition is no longer
possible or required so remove that.
Fixes: fd46d16d60 ("V4L/DVB (11759): dvb-ttpci: Add TS replay capability")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d00f592250 ]
Add the check for the return value of the ida_alloc in order to avoid
NULL pointer dereference.
Moreover, free allocated "ctx->id" if mdp_m2m_open fails later in order
to avoid memory leak.
Fixes: 61890ccaef ("media: platform: mtk-mdp3: add MediaTek MDP3 driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2371adeab7 ]
Add the check for the return value of the create_workqueue
in order to avoid NULL pointer dereference.
Fixes: 28ffeebbb7 ("[media] bdisp: 2D blitter driver using v4l2 mem2mem framework")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4c1cdec319 ]
Thee maximum number of MCA banks is 64 (MAX_NR_BANKS), see
a0bc32b3ca ("x86/mce: Increase maximum number of banks to 64").
However, the bank_map which contains a bitfield of which banks to
initialize is of type unsigned int and that overflows when those bit
numbers are >= 32, leading to UBSAN complaining correctly:
UBSAN: shift-out-of-bounds in arch/x86/kernel/cpu/mce/amd.c:1365:38
shift exponent 32 is too large for 32-bit type 'int'
Change the bank_map to a u64 and use the proper BIT_ULL() macro when
modifying bits in there.
[ bp: Rewrite commit message. ]
Fixes: a0bc32b3ca ("x86/mce: Increase maximum number of banks to 64")
Signed-off-by: Muralidhara M K <muralimk@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230127151601.1068324-1-muralimk@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 44750f1536 ]
While stressing EAS on my dragonboard RB3, I have noticed that LITTLE cores
where never selected as the most energy efficient CPU whatever the
utilization level of waking task.
energy model framework uses its cost field to estimate the energy with
the formula:
nrg = cost of the selected OPP * utilization / CPU's max capacity
which ends up selecting the CPU with lowest cost / max capacity ration
as long as the utilization fits in the OPP's capacity.
If we compare the cost of a little OPP with similar capacity of a big OPP
like :
OPP(kHz) OPP capacity cost max capacity cost/max capacity
LITTLE 1766400 407 351114 407 863
big 1056000 408 520267 1024 508
This can be interpreted as the LITTLE core consumes 70% more than big core
for the same compute capacity.
According to [1], LITTLE consumes 10% less than big core for Coremark
benchmark at those OPPs. If we consider that everything else stays
unchanged, the dynamic-power-coefficient of LITTLE core should be
only 53% of the current value: 290 * 53% = 154
Set the dynamic-power-coefficient of CPU0-3 to 154 to fix the energy model.
[1] https://github.com/kdrag0n/freqbench/tree/master/results/sdm845/main
Fixes: 0e0a8e35d7 ("arm64: dts: qcom: sdm845: correct dynamic power coefficients")
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230106164618.1845281-1-vincent.guittot@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 23be9f68f9 ]
This fixes:
arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dtb: leds@800: 'led-lan@19', 'led-power@11', 'led-wan-red@12', 'led-wan-white@15', 'led-wps@14' do not match any of the regexes: '^led@[a-f0-9]+$', 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/leds/leds-bcm63138.yaml
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/all/20230228144400.21689-2-zajec5@gmail.com/
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4f4b30a777 ]
According to latest errata of J721e [1], (i2024) 'MMCSD: Peripherals
Do Not Support HS400' which applies to MMCSD0 subsystem. Speed modes
supported has been already updated but missed dropping 'ti,strobe-sel'
property which is only required by HS400 speed mode.
Thus, drop 'ti,strobe-sel' property from kernel dtsi for J721e SoC.
[1] https://www.ti.com/lit/er/sprz455/sprz455.pdf
Fixes: eb8f6194e8 ("arm64: dts: ti: k3-j721e-main: Update the speed modes supported and their itap delay values for MMCSD subsystems")
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Diwakar Dhyani <d-dhyani@ti.com>
Reviewed-by: Nitin Yadav <n-yadav@ti.com>
Link: https://lore.kernel.org/r/20230203073724.29529-1-b-kapoor@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 691c1fcda5 ]
This is very close to a straight revert of commit 218320fec2
("regulator: core: Fix off-on-delay-us for always-on/boot-on
regulators"). We've identified that patch as causing a boot speed
regression on sc7180-trogdor boards. While boot speed certainly isn't
more important than making sure that power sequencing is correct,
looking closely at the original change it doesn't seem to have been
fully justified. It mentions "cycling issues" without describing
exactly what the issues were. That means it's possible that the
cycling issues were really a problem that should be fixed in a
different way.
Let's take a careful look at how we should handle regulators that have
an off-on-delay and that are boot-on or always-on. Linux currently
doesn't have any way to identify whether a GPIO regulator was already
on when the kernel booted. That means that when the kernel boots we
probe a regulator, see that it wants boot-on / always-on we, and then
turn the regulator on. We could be in one of two cases when we do
this:
a) The regulator might have been left on by the bootloader and we're
ensuring that it stays on.
b) The regulator might have been left off by the bootloader and we're
just now turning it on.
For case a) we definitely don't need any sort of delay. For case b) we
_might_ need some delay in case the bootloader turned the regulator
off _right_ before booting the kernel. To get the proper delay for
case b) then we can just assume a `last_off` of 0, which is what it
gets initialized to by default.
As per above, we can't tell whether we're in case a) or case b) so
we'll assume the longer delay (case b). This basically puts the code
to how it was before commit 218320fec2 ("regulator: core: Fix
off-on-delay-us for always-on/boot-on regulators"). However, we add
one important change: we make sure that the delay is actually honored
if `last_off` is 0. Though the original "cycling issues" cited were
vague, I'm hopeful that this important extra change will be enough to
fix the issues that the initial commit mentioned.
With this fix, I've confined that on a sc7180-trogdor board the delay
at boot goes down from 500 ms to ~250 ms. That's not as good as the 0
ms that we had prior to commit 218320fec2 ("regulator: core: Fix
off-on-delay-us for always-on/boot-on regulators"), but it's probably
safer because we don't know if the bootloader turned the regulator off
right before booting.
One note is that it's possible that we could be in a state that's not
a) or b) if there are other issues in the kernel. The only one I can
think of is related to pinctrl. If the pinctrl driver being used on a
board isn't careful about avoiding glitches when setting up a pin then
it's possible that setting up a pin could cause the regulator to "turn
off" briefly immediately before the regulator probes. If this is
indeed causing problems then the pinctrl driver should be fixed,
perhaps in a similar way to what was done in commit d21f4b7ffc
("pinctrl: qcom: Avoid glitching lines when we first mux to output")
Fixes: 218320fec2 ("regulator: core: Fix off-on-delay-us for always-on/boot-on regulators")
Cc: Christian Kohlschütter <christian@kohlschutter.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20230313111806.1.I2eaad872be0932a805c239a7c7a102233fb0b03b@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 71b1e3ba3f ]
The current DRAM row address mapping arrays skx_{open,close}_row[]
only support ranks with sizes up to 16G. Decoding a rank address
to a DRAM row address for a 32G rank by using either one of the
above arrays by the skx_edac driver, will result in an overflow on
the array.
For a 32G rank, the most significant DRAM row address bit (the
bit17) is mapped from the bit34 of the rank address. Add this new
mapping item to both arrays to fix the overflow issue.
Fixes: 4ec656bdf4 ("EDAC, skx_edac: Add EDAC driver for Skylake")
Reported-by: Feng Xu <feng.f.xu@intel.com>
Tested-by: Feng Xu <feng.f.xu@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/all/20230211011728.71764-1-qiuxu.zhuo@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 554edc3e92 ]
According to the RZ/G Series, 2nd Generation Hardware User’s Manual
Rev. 1.11, the System CPU cores on RZ/G2E do not have their own power
supply, but use the common internal power supply (typical 1.03V).
Hence remove the "opp-microvolt" properties from the Operating
Performance Points table. They are optional, and unused, when none of
the CPU nodes is tied to a regulator using the "cpu-supply" property.
Fixes: 231d8908a6 ("arm64: dts: renesas: r8a774c0: Add OPPs table for cpu devices")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/8348e18a011ded94e35919cd8e17c0be1f9acf2f.1676560856.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fb76b0fae3 ]
According to the R-Car Series, 3rd Generation Hardware User’s Manual
Rev. 2.30, the System CPU cores on R-Car E3 do not have their own power
supply, but use the common internal power supply (typical 1.03V).
Hence remove the "opp-microvolt" properties from the Operating
Performance Points table. They are optional, and unused, when none of
the CPU nodes is tied to a regulator using the "cpu-supply" property.
Fixes: dd7188eb4e ("arm64: dts: renesas: r8a77990: Add OPPs table for cpu devices")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/9232578d9d395d529f64db3333a371e31327f459.1676560856.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d37a3929ca ]
Commit 3840c5bcc2 ("drm/amdgpu: disentangle runtime pm and
vga_switcheroo") made amdgpu only register a vga_switcheroo client for
GPU's with PX, however AMD GPUs in dual gpu Apple Macbooks do need to
register, but don't have PX. Instead of AMD's PX, they use apple-gmux.
Use apple_gmux_detect() to identify these gpus, and
pci_is_thunderbolt_attached() to ensure eGPUs connected to Dual GPU
Macbooks don't register with vga_switcheroo.
Fixes: 3840c5bcc2 ("drm/amdgpu: disentangle runtime pm and vga_switcheroo")
Link: https://lore.kernel.org/amd-gfx/20230210044826.9834-10-orlandoch.dev@gmail.com/
Signed-off-by: Orlando Chamberlain <orlandoch.dev@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a8e47884f1 ]
Currently we schedule a call to output_poll_execute from
drm_kms_helper_poll_enable for 10s in future. Later we try to replace
that in drm_helper_probe_single_connector_modes with a 0s schedule with
delayed_event set.
But as there is already a job in the queue this fails, and the immediate
job we wanted with delayed_event set doesn't occur until 10s later.
And that call acts as if connector state has changed, reprobing modes.
This has a side effect of waking up a display that has been blanked.
Make sure we cancel the old job before submitting the immediate one.
Fixes: 162b6a57ac ("drm/probe-helper: don't lose hotplug event")
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
[Maxime: Switched to mod_delayed_work]
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230127154052.452524-1-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 955df4f877 ]
In tpm_tis_resume() make sure that the locality has been claimed when
tpm_tis_reenable_interrupts() is called. Otherwise the writings to the
register might not have any effect.
Fixes: 45baa1d1fa ("tpm_tis: Re-enable interrupts upon (S3) resume")
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
