[ Upstream commit 9f3dbcb5632d6876226031d552ef6163bb3ad215 ]
csiostor uses function pointer casts to keep the csio_ln_ev state machine
hidden, but this causes warnings about control flow integrity (KCFI)
violations in clang-16 and higher:
drivers/scsi/csiostor/csio_lnode.c:1098:33: error: cast from 'void (*)(struct csio_lnode *, enum csio_ln_ev)' to 'csio_sm_state_t' (aka 'void (*)(void *, unsigned int)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
1098 | return (csio_get_state(ln) == ((csio_sm_state_t)csio_lns_ready));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/csiostor/csio_lnode.c:1369:29: error: cast from 'void (*)(struct csio_lnode *, enum csio_ln_ev)' to 'csio_sm_state_t' (aka 'void (*)(void *, unsigned int)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
1369 | if (csio_get_state(ln) == ((csio_sm_state_t)csio_lns_uninit)) {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/csiostor/csio_lnode.c:1373:29: error: cast from 'void (*)(struct csio_lnode *, enum csio_ln_ev)' to 'csio_sm_state_t' (aka 'void (*)(void *, unsigned int)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
1373 | if (csio_get_state(ln) == ((csio_sm_state_t)csio_lns_ready)) {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/csiostor/csio_lnode.c:1377:29: error: cast from 'void (*)(struct csio_lnode *, enum csio_ln_ev)' to 'csio_sm_state_t' (aka 'void (*)(void *, unsigned int)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
1377 | if (csio_get_state(ln) == ((csio_sm_state_t)csio_lns_offline)) {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Move the enum into a shared header so the correct types can be used without
the need for casts.
Fixes: a3667aaed5 ("[SCSI] csiostor: Chelsio FCoE offload driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240213100518.457623-1-arnd@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 21ec68234826b1b54ab980a8df6e33c74cfbee58 ]
During recovery, if FAULT_BLOCK is on, it is possible that
f2fs_reserve_new_block() will return -ENOSPC during recovery,
then it may trigger panic.
Also, if fault injection rate is 1 and only FAULT_BLOCK fault
type is on, it may encounter deadloop in loop of block reservation.
Let's change as below to fix these issues:
- remove bug_on() to avoid panic.
- limit the loop count of block reservation to avoid potential
deadloop.
Fixes: 956fa1ddc132 ("f2fs: fix to check return value of f2fs_reserve_new_block()")
Reported-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c2034ef6192a65a986a45c2aa2ed05824fdc0e9f ]
BUG: kernel NULL pointer dereference, address: 0000000000000014
RIP: 0010:f2fs_submit_page_write+0x6cf/0x780 [f2fs]
Call Trace:
<TASK>
? show_regs+0x6e/0x80
? __die+0x29/0x70
? page_fault_oops+0x154/0x4a0
? prb_read_valid+0x20/0x30
? __irq_work_queue_local+0x39/0xd0
? irq_work_queue+0x36/0x70
? do_user_addr_fault+0x314/0x6c0
? exc_page_fault+0x7d/0x190
? asm_exc_page_fault+0x2b/0x30
? f2fs_submit_page_write+0x6cf/0x780 [f2fs]
? f2fs_submit_page_write+0x736/0x780 [f2fs]
do_write_page+0x50/0x170 [f2fs]
f2fs_outplace_write_data+0x61/0xb0 [f2fs]
f2fs_do_write_data_page+0x3f8/0x660 [f2fs]
f2fs_write_single_data_page+0x5bb/0x7a0 [f2fs]
f2fs_write_cache_pages+0x3da/0xbe0 [f2fs]
...
It is possible that other threads have added this fio to io->bio
and submitted the io->bio before entering f2fs_submit_page_write().
At this point io->bio = NULL.
If is_end_zone_blkaddr(sbi, fio->new_blkaddr) of this fio is true,
then an NULL pointer dereference error occurs at bio_get(io->bio).
The original code for determining zone end was after "out:",
which would have missed some fio who is zone end. I've moved
this code before "skip:" to make sure it's done for each fio.
Fixes: e067dc3c6b ("f2fs: maintain six open zones for zoned devices")
Signed-off-by: Wenjie Qi <qwjhust@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 536af8211586af09c5bea1c15ad28ddec5f66a97 ]
It needs to check last zone_pending_bio and wait IO completion before
traverse next fio in io->io_list, otherwise, bio in next zone may be
submitted before all IO completion in current zone.
Fixes: e067dc3c6b ("f2fs: maintain six open zones for zoned devices")
Cc: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Reviewed-by: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b896e302f79678451a94769ddd9e52e954c64fbb ]
verify_blkaddr() will trigger panic once we inject fault into
f2fs_is_valid_blkaddr(), fix to remove this unnecessary f2fs_bug_on().
Fixes: 18792e64c8 ("f2fs: support fault injection for f2fs_is_valid_blkaddr()")
Reviewed-by: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 54607494875edd636aff3c21ace3ad9a7da758a9 ]
In reserve_compress_blocks(), we update blkaddrs of dnode in prior to
inc_valid_block_count(), it may cause inconsistent status bewteen
i_blocks and blkaddrs once inc_valid_block_count() fails.
To fix this issue, it needs to reverse their invoking order.
Fixes: c75488fb4d ("f2fs: introduce F2FS_IOC_RESERVE_COMPRESS_BLOCKS")
Reviewed-by: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 59d0d4c3eae0f3dd8886ed59f89f21fa09e324f5 ]
This patch allows caller to pass blkaddr to f2fs_set_data_blkaddr()
and let __set_data_blkaddr() inside f2fs_set_data_blkaddr() to update
dn->data_blkaddr w/ last value of blkaddr.
Just cleanup, no logic changes.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Stable-dep-of: 54607494875e ("f2fs: compress: fix to avoid inconsistence bewteen i_blocks and dnode")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a53936361330e4c55c0654605178281387d9c761 ]
Commit 3c6c2bebef ("f2fs: avoid punch_hole overhead when releasing
volatile data") introduced FI_FIRST_BLOCK_WRITTEN as below reason:
This patch is to avoid some punch_hole overhead when releasing volatile
data. If volatile data was not written yet, we just can make the first
page as zero.
After commit 7bc155fec5 ("f2fs: kill volatile write support"), we
won't support volatile write, but it missed to remove obsolete
FI_FIRST_BLOCK_WRITTEN, delete it in this patch.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Stable-dep-of: 54607494875e ("f2fs: compress: fix to avoid inconsistence bewteen i_blocks and dnode")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eb8fbaa53374e0a2d4381190abfe708481517bbb ]
Compressed cluster may not be released due to we can fail in
release_compress_blocks(), fix to handle reserved compressed
cluster correctly in reserve_compress_blocks().
Fixes: 4c8ff7095b ("f2fs: support data compression")
Signed-off-by: Sheng Yong <shengyong@oppo.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd244524c2cf07b5f4c3fe8abd6a99225c76544b ]
When we overwrite compressed cluster w/ normal cluster, we should
not unlock cp_rwsem during f2fs_write_raw_pages(), otherwise data
will be corrupted if partial blocks were persisted before CP & SPOR,
due to cluster metadata wasn't updated atomically.
Fixes: 4c8ff7095b ("f2fs: support data compression")
Reviewed-by: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a430dd49e9cb021372b0ad91e60aeef9c6ced00 ]
If data block in compressed cluster is not persisted with metadata
during checkpoint, after SPOR, the data may be corrupted, let's
guarantee to write compressed page by checkpoint.
Fixes: 4c8ff7095b ("f2fs: support data compression")
Reviewed-by: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c21a8870c98611e8f892511825c9607f1e2cd456 ]
Upon rare occasions, KASAN reports a use-after-free Write
in srpt_refresh_port().
This seems to be because an event handler is registered before the
srpt device is fully setup and a race condition upon error may leave a
partially setup event handler in place.
Instead, only register the event handler after srpt device initialization
is complete.
Fixes: a42d985bd5 ("ib_srpt: Initial SRP Target merge for v3.3-rc1")
Signed-off-by: William Kucharski <william.kucharski@oracle.com>
Link: https://lore.kernel.org/r/20240202091549.991784-2-william.kucharski@oracle.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9fc91a6fe37c78ef301aed4251f7e50b8524e72d ]
After system_resume the amplifers will remain off, even if they were on
before system_suspend.
Use playback_started bool to save the playback state, and restore power
state based on it.
Fixes: 5be27f1e3e ("ALSA: hda/tas2781: Add tas2781 HDA driver")
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <1742b61901781826f6e6212ffe1d21af542d134a.1709918447.git.soyer@irl.hu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 68f7f3ff6c2a0998be9dc07622bd0d16fd1fda20 ]
Make the amp available immediately after a module
load to avoid having to wait for a PCM hook action.
(eg. unloading & loading the module while listening
music)
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/7f2f65d9212aa16edd4db8725489ae59dbe74c66.1703895108.git.soyer@irl.hu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Stable-dep-of: 9fc91a6fe37c ("ALSA: hda/tas2781: restore power state after system_resume")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f51de7e30c7282162a631af8a425b54a4576346 ]
The runtime_resume function calls prmg_load and apply_calibration
functions, but system_resume also calls them, so calling
pm_runtime_force_resume before reset is unnecessary.
For consistency, do not call the pm_runtime_force_suspend in
system_suspend, as runtime_suspend does the same.
Fixes: 5be27f1e3e ("ALSA: hda/tas2781: Add tas2781 HDA driver")
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <d0b4cc1248b9d375d59c009563da42d60d69eac3.1709918447.git.soyer@irl.hu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bec7760a6c5fa59593dac264fa0c628e46815986 ]
The amplifier doesn't loose register state in software shutdown mode, so
there is no need to reset the cur_* values.
Without these resets, the amplifier can be turned on after
runtime_suspend without waiting for the program and
profile to be restored.
Fixes: 5be27f1e3e ("ALSA: hda/tas2781: Add tas2781 HDA driver")
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <aa27ae084150988bf6a0ead7e3403bc485d790f8.1709918447.git.soyer@irl.hu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c062166995c9e57d5cd508b332898f79da319802 ]
Realtek codec on HP Envy laptop series are heavily modified by vendor.
Therefore, need intervention to make it work properly. The patch fixes:
- B&O soundbar speakers (between lid and keyboard) activation
- Enable LED on mute button
- Add missing process coefficient which affects the output amplifier
- Volume control synchronization between B&O soundbar and side speakers
- Unmute headset output on several HP Envy models
- Auto-enable headset mic when plugged
This patch was tested on HP Envy x360 13-AR0107AU with Realtek ALC285
The only unsolved problem is output amplifier of all built-in speakers
is too weak, which causes volume of built-in speakers cannot be loud
as vendor's proprietary driver due to missing _DSD parameter in the
firmware. The solution is currently on research. Expected to has another
patch in the future.
Potential fix to related issues, need test before close those issues:
- https://bugzilla.kernel.org/show_bug.cgi?id=189331
- https://bugzilla.kernel.org/show_bug.cgi?id=216632
- https://bugzilla.kernel.org/show_bug.cgi?id=216311
- https://bugzilla.kernel.org/show_bug.cgi?id=213507
Signed-off-by: Athaariq Ardhiansyah <foss@athaariq.my.id>
Message-ID: <20240310140249.3695-1-foss@athaariq.my.id>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f3dc1bdb6b0b0693562c7c54a6c28bafa608ba3c ]
cifs writeback doesn't correctly handle the case where
cifs_extend_writeback() hits a point where it is considering an additional
folio, but this would overrun the wsize - at which point it drops out of
the xarray scanning loop and calls xas_pause(). The problem is that
xas_pause() advances the loop counter - thereby skipping that page.
What needs to happen is for xas_reset() to be called any time we decide we
don't want to process the page we're looking at, but rather send the
request we are building and start a new one.
Fix this by copying and adapting the netfslib writepages code as a
temporary measure, with cifs writeback intending to be offloaded to
netfslib in the near future.
This also fixes the issue with the use of filemap_get_folios_tag() causing
retry of a bunch of pages which the extender already dealt with.
This can be tested by creating, say, a 64K file somewhere not on cifs
(otherwise copy-offload may get underfoot), mounting a cifs share with a
wsize of 64000, copying the file to it and then comparing the original file
and the copy:
dd if=/dev/urandom of=/tmp/64K bs=64k count=1
mount //192.168.6.1/test /mnt -o user=...,pass=...,wsize=64000
cp /tmp/64K /mnt/64K
cmp /tmp/64K /mnt/64K
Without the fix, the cmp fails at position 64000 (or shortly thereafter).
Fixes: d08089f649 ("cifs: Change the I/O paths to use an iterator rather than a page list")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
cc: Shyam Prasad N <sprasad@microsoft.com>
cc: Tom Talpey <tom@talpey.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: samba-technical@lists.samba.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c40497d82387188f14d9adc4caa58ee1cb1999e1 ]
Filesystems should use folio->index and folio->mapping, instead of
folio_index(folio), folio_mapping() and folio_file_mapping() since
they know that it's in the pagecache.
Change this automagically with:
perl -p -i -e 's/folio_mapping[(]([^)]*)[)]/\1->mapping/g' fs/smb/client/*.c
perl -p -i -e 's/folio_file_mapping[(]([^)]*)[)]/\1->mapping/g' fs/smb/client/*.c
perl -p -i -e 's/folio_index[(]([^)]*)[)]/\1->index/g' fs/smb/client/*.c
Reported-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: Steve French <sfrench@samba.org>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Ronnie Sahlberg <lsahlber@redhat.com>
cc: Shyam Prasad N <sprasad@microsoft.com>
cc: Tom Talpey <tom@talpey.com>
cc: linux-cifs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Stable-dep-of: f3dc1bdb6b0b ("cifs: Fix writeback data corruption")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7938e9ce39d6779d2f85d822cc930f73420e54a6 ]
The kmalloc() in zynq_clk_setup() will return null if the
physical memory has run out. As a result, if we use snprintf()
to write data to the null address, the null pointer dereference
bug will happen.
This patch uses a stack variable to replace the kmalloc().
Fixes: 0ee52b157b ("clk: zynq: Add clock controller driver")
Suggested-by: Michal Simek <michal.simek@amd.com>
Suggested-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20240301084437.16084-1-duoming@zju.edu.cn
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e97fe4901e0f59a0bfd524578fe3768f8ca42428 ]
It is possible for clk_core_get to dereference a NULL in the following
sequence:
clk_core_get()
of_clk_get_hw_from_clkspec()
__of_clk_get_hw_from_provider()
__clk_get_hw()
__clk_get_hw() can return NULL which is dereferenced by clk_core_get() at
hw->core.
Prior to commit dde4eff47c ("clk: Look for parents with clkdev based
clk_lookups") the check IS_ERR_OR_NULL() was performed which would have
caught the NULL.
Reading the description of this function it talks about returning NULL but
that cannot be so at the moment.
Update the function to check for hw before dereferencing it and return NULL
if hw is NULL.
Fixes: dde4eff47c ("clk: Look for parents with clkdev based clk_lookups")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20240302-linux-next-24-03-01-simple-clock-fixes-v1-1-25f348a5982b@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 205c29887a333ee4b37596e6533373e38cb23947 ]
Enabling strobe and then setting brightness to 0 causes the driver to enter
invalid state after strobe end timer fires. We should cancel strobe mode
resources when changing brightness (aka torch mode).
Fixes: cef8ec8cbd ("leds: add sgm3140 driver")
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Link: https://lore.kernel.org/r/20240217191133.1757553-1-megi@xff.cz
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 20933531be0577cdd782216858c26150dbc7936f ]
Move the prototypes into mpc10x.h which is included by all the relevant
C files, fixes:
arch/powerpc/platforms/embedded6xx/ls_uart.c:59:6: error: no previous prototype for 'avr_uart_configure'
arch/powerpc/platforms/embedded6xx/ls_uart.c:82:6: error: no previous prototype for 'avr_uart_send'
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240305123410.3306253-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8f8cd6c0a43ed637e620bbe45a8d0e0c2f4d5130 ]
The synchronization here is to ensure the ordering of freeing of a module
init so that it happens before W+X checking. It is worth noting it is not
that the freeing was not happening, it is just that our sanity checkers
raced against the permission checkers which assume init memory is already
gone.
Commit 1a7b7d9220 ("modules: Use vmalloc special flag") moved calling
do_free_init() into a global workqueue instead of relying on it being
called through call_rcu(..., do_free_init), which used to allowed us call
do_free_init() asynchronously after the end of a subsequent grace period.
The move to a global workqueue broke the gaurantees for code which needed
to be sure the do_free_init() would complete with rcu_barrier(). To fix
this callers which used to rely on rcu_barrier() must now instead use
flush_work(&init_free_wq).
Without this fix, we still could encounter false positive reports in W+X
checking since the rcu_barrier() here can not ensure the ordering now.
Even worse, the rcu_barrier() can introduce significant delay. Eric
Chanudet reported that the rcu_barrier introduces ~0.1s delay on a
PREEMPT_RT kernel.
[ 0.291444] Freeing unused kernel memory: 5568K
[ 0.402442] Run /sbin/init as init process
With this fix, the above delay can be eliminated.
Link: https://lkml.kernel.org/r/20240227023546.2490667-1-changbin.du@huawei.com
Fixes: 1a7b7d9220 ("modules: Use vmalloc special flag")
Signed-off-by: Changbin Du <changbin.du@huawei.com>
Tested-by: Eric Chanudet <echanude@redhat.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Xiaoyi Su <suxiaoyi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 11b752ac5a07cbfd95592fac5237a02f45662926 ]
The following table shows the values of the 'halt_reg' and the
'enable_reg' fields from the pcie clocks defined in the current
driver:
clock halt_reg enable_reg
gcc_pcie0_ahb_clk 0x75010 0x75010
gcc_pcie0_aux_clk 0x75014 0x75014
gcc_pcie0_axi_m_clk 0x75008 0x75008
gcc_pcie0_axi_s_bridge_clk 0x75048 0x75048
gcc_pcie0_axi_s_clk 0x7500c 0x7500c
gcc_pcie0_pipe_clk 0x75018 0x75018
gcc_pcie1_ahb_clk 0x76010 0x76010
gcc_pcie1_aux_clk 0x76014 0x76014
gcc_pcie1_axi_m_clk 0x76008 0x76008
gcc_pcie1_axi_s_bridge_clk 0x76048 0x76048
gcc_pcie1_axi_s_clk 0x7600c 0x7600c
gcc_pcie1_pipe_clk 8* 0x76018
Based on the table, it is quite likely that the pcie0 and the pci1
clocks are using the same register layout, however it seems that
the value of the 'halt_reg' field in the 'gcc_pcie1_pipe_clk' clock
is wrong.
In the downstream driver [1], the same '0x76018' value is used for
both the 'halt_reg' and for the 'enable_reg' fields of the
'gcc_pcie1_pipe_clk' clock.
Update the current driver to use the same value used downstream as
probably that is the correct value.
1. https://git.codelinaro.org/clo/qsdk/oss/kernel/linux-ipq-5.4/-/blob/NHSS.QSDK.12.4.r4/drivers/clk/qcom/gcc-ipq5018.c?ref_type=heads#L2316
Fixes: e3fdbef1ba ("clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Link: https://lore.kernel.org/r/20240225-gcc-ipq5018-register-fixes-v1-2-3c191404d9f0@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f982adcc1b1c02a3114f68ac73c811cbfabe90fa ]
The value of the 'enable_reg' field in the 'gcc_gmac0_sys_clk'
clock definition seems wrong as it is greater than the
'max_register' value defined in the regmap configuration.
Additionally, all other gmac specific branch clock definitions
within the driver uses the same value both for the 'enable_reg'
and for the 'halt_reg' fields.
Due to the lack of documentation the correct value is not known.
Looking into the downstream driver does not help either, as that
uses the same (presumably wrong) value [1].
Nevertheless, change the 'enable_reg' field of 'gcc_gmac0_sys_clk'
to use the value from the 'halt_reg' field so it follows the pattern
used in other gmac clock definitions. The change is based on the
assumption that the register layout of this clock is the same
as the other gmac clocks.
1. https://git.codelinaro.org/clo/qsdk/oss/kernel/linux-ipq-5.4/-/blob/NHSS.QSDK.12.4.r4/drivers/clk/qcom/gcc-ipq5018.c?ref_type=heads#L1889
Fixes: e3fdbef1ba ("clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Link: https://lore.kernel.org/r/20240225-gcc-ipq5018-register-fixes-v1-1-3c191404d9f0@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad86d7ee43b22aa2ed60fb982ae94b285c1be671 ]
Running event hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=0/
in one of the system throws below error:
---Logs---
# perf list | grep hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles
hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=?/[Kernel PMU event]
# perf stat -v -e hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=0/ sleep 2
Using CPUID 00800200
Control descriptor is not initialized
Warning:
hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=0/ event is not supported by the kernel.
failed to read counter hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=0/
Performance counter stats for 'system wide':
<not supported> hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=0/
2.000700771 seconds time elapsed
The above error is because of the hcall failure as required
permission "Enable Performance Information Collection" is not set.
Based on current code, single_gpci_request function did not check the
error type incase hcall fails and by default returns EINVAL. But we can
have other reasons for hcall failures like H_AUTHORITY/H_PARAMETER with
detail_rc as GEN_BUF_TOO_SMALL, for which we need to act accordingly.
Fix this issue by adding new checks in the single_gpci_request and
h_gpci_event_init functions.
Result after fix patch changes:
# perf stat -e hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=0/ sleep 2
Error:
No permission to enable hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=0/ event.
Fixes: 220a0c609a ("powerpc/perf: Add support for the hv gpci (get performance counter info) interface")
Reported-by: Akanksha J N <akanksha@linux.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240229122847.101162-1-kjain@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
