[ Upstream commit c29dfd661fe2f8d1b48c7f00590929c04b25bf40 ]
gcc-14 produces a bogus warning in some configurations:
drivers/edac/ie31200_edac.c: In function 'ie31200_probe1.isra':
drivers/edac/ie31200_edac.c:412:26: error: 'dimm_info' is used uninitialized [-Werror=uninitialized]
412 | struct dimm_data dimm_info[IE31200_CHANNELS][IE31200_DIMMS_PER_CHANNEL];
| ^~~~~~~~~
drivers/edac/ie31200_edac.c:412:26: note: 'dimm_info' declared here
412 | struct dimm_data dimm_info[IE31200_CHANNELS][IE31200_DIMMS_PER_CHANNEL];
| ^~~~~~~~~
I don't see any way the unintialized access could really happen here,
but I can see why the compiler gets confused by the two loops.
Instead, rework the two nested loops to only read the addr_decode
registers and then keep only one instance of the dimm info structure.
[Tony: Qiuxu pointed out that the "populate DIMM info" comment was left
behind in the refactor and suggested moving it. I deleted the comment
as unnecessry in front os a call to populate_dimm_info(). That seems
pretty self-describing.]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/all/20250122065031.1321015-1-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3128b0a2e0cf6e07aa78e5f8cf7dd9cd59dc8174 ]
In multi-cluster MIPS I6500 systems there is a GIC in each cluster,
each with its own counter. When a cluster powers up the counter will
be stopped, with the COUNTSTOP bit set in the GIC_CONFIG register.
In single cluster systems, it has been fine to clear COUNTSTOP once
in gic_clocksource_of_init() to start the counter. In multi-cluster
systems, this will only have started the counter in the boot cluster,
and any CPUs in other clusters will find their counter stopped which
will break the GIC clock_event_device.
Resolve this by having CPUs clear the COUNTSTOP bit when they come
online, using the existing gic_starting_cpu() CPU hotplug callback. This
will allow CPUs in secondary clusters to ensure that the cluster's GIC
counter is running as expected.
Signed-off-by: Paul Burton <paulburton@kernel.org>
Signed-off-by: Chao-ying Fu <cfu@wavecomp.com>
Signed-off-by: Dragan Mladjenovic <dragan.mladjenovic@syrmia.com>
Signed-off-by: Aleksandar Rikalo <arikalo@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 00a134fc2bb4a5f8fada58cf7ff4259149691d64 ]
The pm-cps code has up until now used per-CPU variables indexed by core,
rather than CPU number, in order to share data amongst sibling CPUs (ie.
VPs/threads in a core). This works fine for single cluster systems, but
with multi-cluster systems a core number is no longer unique in the
system, leading to sharing between CPUs that are not actually siblings.
Avoid this issue by using per-CPU variables as they are more generally
used - ie. access them using CPU numbers rather than core numbers.
Sharing between siblings is then accomplished by:
- Assigning the same pointer to entries for each sibling CPU for the
nc_asm_enter & ready_count variables, which allow this by virtue of
being per-CPU pointers.
- Indexing by the first CPU set in a CPUs cpu_sibling_map in the case
of pm_barrier, for which we can't use the previous approach because
the per-CPU variable is not a pointer.
Signed-off-by: Paul Burton <paulburton@kernel.org>
Signed-off-by: Dragan Mladjenovic <dragan.mladjenovic@syrmia.com>
Signed-off-by: Aleksandar Rikalo <arikalo@gmail.com>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1f7df3a691740a7736bbc99dc4ed536120eb4746 ]
The IOMMU translation for MSI message addresses has been a 2-step process,
separated in time:
1) iommu_dma_prepare_msi(): A cookie pointer containing the IOVA address
is stored in the MSI descriptor when an MSI interrupt is allocated.
2) iommu_dma_compose_msi_msg(): this cookie pointer is used to compute a
translated message address.
This has an inherent lifetime problem for the pointer stored in the cookie
that must remain valid between the two steps. However, there is no locking
at the irq layer that helps protect the lifetime. Today, this works under
the assumption that the iommu domain is not changed while MSI interrupts
being programmed. This is true for normal DMA API users within the kernel,
as the iommu domain is attached before the driver is probed and cannot be
changed while a driver is attached.
Classic VFIO type1 also prevented changing the iommu domain while VFIO was
running as it does not support changing the "container" after starting up.
However, iommufd has improved this so that the iommu domain can be changed
during VFIO operation. This potentially allows userspace to directly race
VFIO_DEVICE_ATTACH_IOMMUFD_PT (which calls iommu_attach_group()) and
VFIO_DEVICE_SET_IRQS (which calls into iommu_dma_compose_msi_msg()).
This potentially causes both the cookie pointer and the unlocked call to
iommu_get_domain_for_dev() on the MSI translation path to become UAFs.
Fix the MSI cookie UAF by removing the cookie pointer. The translated IOVA
address is already known during iommu_dma_prepare_msi() and cannot change.
Thus, it can simply be stored as an integer in the MSI descriptor.
The other UAF related to iommu_get_domain_for_dev() will be addressed in
patch "iommu: Make iommu_dma_prepare_msi() into a generic operation" by
using the IOMMU group mutex.
Link: https://patch.msgid.link/r/a4f2cd76b9dc1833ee6c1cf325cba57def22231c.1740014950.git.nicolinc@nvidia.com
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 756276ce78d5624dc814f9d99f7d16c8fd51076e ]
On MIPS system, most of the syscall function name begin with prefix
sys_. Some syscalls are special such as clone/fork, function name of
these begin with __sys_. Since scratch registers need be saved in
stack when these system calls happens.
With ftrace system call method, system call functions are declared with
SYSCALL_DEFINEx, metadata of the system call symbol name begins with
sys_. Here mips specific function arch_syscall_match_sym_name is used to
compare function name between sys_call_table[] and metadata of syscall
symbol.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7ffb791423c7c518269a9aad35039ef824a40adb ]
When CONFIG_PCI_P2PDMA=y (which is basically enabled on all
large x86 distros), it maps the PFN's via a ZONE_DEVICE
mapping using devm_memremap_pages(). The mapped virtual
address range corresponds to the pci_resource_start()
of the BAR address and size corresponding to the BAR length.
When KASLR is enabled, the direct map range of the kernel is
reduced to the size of physical memory plus additional padding.
If the BAR address is beyond this limit, PCI peer to peer DMA
mappings fail.
Fix this by not shrinking the size of the direct map when
CONFIG_PCI_P2PDMA=y.
This reduces the total available entropy, but it's better than
the current work around of having to disable KASLR completely.
[ mingo: Clarified the changelog to point out the broad impact ... ]
Signed-off-by: Balbir Singh <balbirs@nvidia.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # drivers/pci/Kconfig
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/lkml/20250206023201.1481957-1-balbirs@nvidia.com/
Link: https://lore.kernel.org/r/20250206234234.1912585-1-balbirs@nvidia.com
--
arch/x86/mm/kaslr.c | 10 ++++++++--
drivers/pci/Kconfig | 6 ++++++
2 files changed, 14 insertions(+), 2 deletions(-)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 88f7f56d16f568f19e1a695af34a7f4a6ce537a6 ]
When a bio with REQ_PREFLUSH is submitted to dm, __send_empty_flush()
generates a flush_bio with REQ_OP_WRITE | REQ_PREFLUSH | REQ_SYNC,
which causes the flush_bio to be throttled by wbt_wait().
An example from v5.4, similar problem also exists in upstream:
crash> bt 2091206
PID: 2091206 TASK: ffff2050df92a300 CPU: 109 COMMAND: "kworker/u260:0"
#0 [ffff800084a2f7f0] __switch_to at ffff80004008aeb8
#1 [ffff800084a2f820] __schedule at ffff800040bfa0c4
#2 [ffff800084a2f880] schedule at ffff800040bfa4b4
#3 [ffff800084a2f8a0] io_schedule at ffff800040bfa9c4
#4 [ffff800084a2f8c0] rq_qos_wait at ffff8000405925bc
#5 [ffff800084a2f940] wbt_wait at ffff8000405bb3a0
#6 [ffff800084a2f9a0] __rq_qos_throttle at ffff800040592254
#7 [ffff800084a2f9c0] blk_mq_make_request at ffff80004057cf38
#8 [ffff800084a2fa60] generic_make_request at ffff800040570138
#9 [ffff800084a2fae0] submit_bio at ffff8000405703b4
#10 [ffff800084a2fb50] xlog_write_iclog at ffff800001280834 [xfs]
#11 [ffff800084a2fbb0] xlog_sync at ffff800001280c3c [xfs]
#12 [ffff800084a2fbf0] xlog_state_release_iclog at ffff800001280df4 [xfs]
#13 [ffff800084a2fc10] xlog_write at ffff80000128203c [xfs]
#14 [ffff800084a2fcd0] xlog_cil_push at ffff8000012846dc [xfs]
#15 [ffff800084a2fda0] xlog_cil_push_work at ffff800001284a2c [xfs]
#16 [ffff800084a2fdb0] process_one_work at ffff800040111d08
#17 [ffff800084a2fe00] worker_thread at ffff8000401121cc
#18 [ffff800084a2fe70] kthread at ffff800040118de4
After commit 2def2845cc ("xfs: don't allow log IO to be throttled"),
the metadata submitted by xlog_write_iclog() should not be throttled.
But due to the existence of the dm layer, throttling flush_bio indirectly
causes the metadata bio to be throttled.
Fix this by conditionally adding REQ_IDLE to flush_bio.bi_opf, which makes
wbt_should_throttle() return false to avoid wbt_wait().
Signed-off-by: Jinliang Zheng <alexjlzheng@tencent.com>
Reviewed-by: Tianxiang Peng <txpeng@tencent.com>
Reviewed-by: Hao Peng <flyingpeng@tencent.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 236d3910117e9f97ebf75e511d8bcc950f1a4e5f ]
In `set_kcfg_value_str`, an untrusted string is accessed with the assumption
that it will be at least two characters long due to the presence of checks for
opening and closing quotes. But the check for the closing quote
(value[len - 1] != '"') misses the fact that it could be checking the opening
quote itself in case of an invalid input that consists of just the opening
quote.
This commit adds an explicit check to make sure the string is at least two
characters long.
Signed-off-by: Nandakumar Edamana <nandakumar@nandakumar.co.in>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250221210110.3182084-1-nandakumar@nandakumar.co.in
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a980bc5f56b0292336e408f657f79e574e8067c0 ]
The register that enables selecting a test-pattern to be outputted in
free-run mode (FREE_RUN_PAT_SEL[2:0]) is only available on adv7280 based
devices, not the adv7180 based ones.
Add a flag to mark devices that are capable of generating test-patterns,
and those that are not. And only register the control on supported
devices.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 85975daeaa4d6ec560bfcd354fc9c08ad7f38888 ]
When giving up on making a high-confidence prediction,
get_typical_interval() always returns UINT_MAX which means that the
next idle interval prediction will be based entirely on the time till
the next timer. However, the information represented by the most
recent intervals may not be completely useless in those cases.
Namely, the largest recent idle interval is an upper bound on the
recently observed idle duration, so it is reasonable to assume that
the next idle duration is unlikely to exceed it. Moreover, this is
still true after eliminating the suspected outliers if the sample
set still under consideration is at least as large as 50% of the
maximum sample set size.
Accordingly, make get_typical_interval() return the current maximum
recent interval value in that case instead of UINT_MAX.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reported-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Tested-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Tested-by: Christian Loehle <christian.loehle@arm.com>
Tested-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Link: https://patch.msgid.link/7770672.EvYhyI6sBW@rjwysocki.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fe37c699ae3eed6e02ee55fbf5cb9ceb7fcfd76c ]
Depending on the type of panics, it was found that the
__register_nmi_handler() function can be called in NMI context from
nmi_shootdown_cpus() leading to a lockdep splat:
WARNING: inconsistent lock state
inconsistent {INITIAL USE} -> {IN-NMI} usage.
lock(&nmi_desc[0].lock);
<Interrupt>
lock(&nmi_desc[0].lock);
Call Trace:
_raw_spin_lock_irqsave
__register_nmi_handler
nmi_shootdown_cpus
kdump_nmi_shootdown_cpus
native_machine_crash_shutdown
__crash_kexec
In this particular case, the following panic message was printed before:
Kernel panic - not syncing: Fatal hardware error!
This message seemed to be given out from __ghes_panic() running in
NMI context.
The __register_nmi_handler() function which takes the nmi_desc lock
with irq disabled shouldn't be called from NMI context as this can
lead to deadlock.
The nmi_shootdown_cpus() function can only be invoked once. After the
first invocation, all other CPUs should be stuck in the newly added
crash_nmi_callback() and cannot respond to a second NMI.
Fix it by adding a new emergency NMI handler to the nmi_desc
structure and provide a new set_emergency_nmi_handler() helper to set
crash_nmi_callback() in any context. The new emergency handler will
preempt other handlers in the linked list. That will eliminate the need
to take any lock and serve the panic in NMI use case.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20250206191844.131700-1-longman@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 02a940da2ccc0cc0299811379580852b405a0ea2 ]
[WHY]
If max_downscale_src_width check fails, we exit early from TAP calculation and left a NULL
value to the scaling data structure to cause the zero divide in the DML validation.
[HOW]
Call set default TAP calculation before early exit in get_optimal_number_of_taps due to
max downscale limit exceed.
Reviewed-by: Samson Tam <samson.tam@amd.com>
Signed-off-by: Yihan Zhu <Yihan.Zhu@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e451630226bd09dc730eedb4e32cab1cc7155ae8 ]
Problem: Currently when running the "make isoimage" command there is an
error related to wrong parameters passed to the cp command:
"cp: missing destination file operand after 'arch/x86/boot/isoimage/'"
This is caused because FDINITRDS is an empty array.
Solution: Check if FDINITRDS is empty before executing the "cp" command,
similar to how it is done in the case of hdimage.
Signed-off-by: Nir Lichtman <nir@lichtman.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Link: https://lore.kernel.org/r/20250110120500.GA923218@lichtman.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a5caf03188e44388e8c618dcbe5fffad1a249385 ]
The syscon helper device_node_to_regmap() is used to fetch a regmap
registered to a device node. It also currently creates this regmap
if the node did not already have a regmap associated with it. This
should only be used on "syscon" nodes. This driver is not such a
device and instead uses device_node_to_regmap() on its own node as
a hacky way to create a regmap for itself.
This will not work going forward and so we should create our regmap
the normal way by defining our regmap_config, fetching our memory
resource, then using the normal regmap_init_mmio() function.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250123181726.597144-1-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 28d68d396a1cd21591e8c6d74afbde33a7ea107e ]
Normally, a bond uses the MAC address of the first added slave as the bond’s
MAC address. And the bond will set active slave’s MAC address to bond’s
address if fail_over_mac is set to none (0) or follow (2).
When the first slave is removed, the bond will still use the removed slave’s
MAC address, which can lead to a duplicate MAC address and potentially cause
issues with the switch. To avoid confusion, let's warn the user in all
situations, including when fail_over_mac is set to 2 or not in active-backup
mode.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250225033914.18617-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 01358e8fe922f716c05d7864ac2213b2440026e7 ]
Building with W=1 shows a warning about xge_acpi_match being unused when
CONFIG_ACPI is disabled:
drivers/net/ethernet/apm/xgene-v2/main.c:723:36: error: unused variable 'xge_acpi_match' [-Werror,-Wunused-const-variable]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20250225163341.4168238-2-arnd@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7fe0353606d77a32c4c7f2814833dd1c043ebdd2 ]
mtk_foe_entry_set_vlan() in mtk_ppe.c already supports double vlan
tagging, but mtk_flow_offload_replace() in mtk_ppe_offload.c only allows
for 1 vlan tag, optionally in combination with pppoe and dsa tags.
However, mtk_foe_entry_set_vlan() only allows for setting the vlan id.
The protocol cannot be set, it is always ETH_P_8021Q, for inner and outer
tag. This patch adds QinQ support to mtk_flow_offload_replace(), only in
the case that both inner and outer tags are ETH_P_8021Q.
Only PPPoE-in-Q (as before) and Q-in-Q are allowed. A combination
of PPPoE and Q-in-Q is not allowed.
Signed-off-by: Eric Woudstra <ericwouds@gmail.com>
Link: https://patch.msgid.link/20250225201509.20843-1-ericwouds@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1b9366c601039d60546794c63fbb83ce8e53b978 ]
If waiting for gpu reset done in KFD release_work, thers is WARNING:
possible circular locking dependency detected
#2 kfd_create_process
kfd_process_mutex
flush kfd release work
#1 kfd release work
wait for amdgpu reset work
#0 amdgpu_device_gpu_reset
kgd2kfd_pre_reset
kfd_process_mutex
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock((work_completion)(&p->release_work));
lock((wq_completion)kfd_process_wq);
lock((work_completion)(&p->release_work));
lock((wq_completion)amdgpu-reset-dev);
To fix this, KFD create process move flush release work outside
kfd_process_mutex.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b5d7b2f04ebcff740f44ef4d295b3401aeb029f4 ]
In case health counter has not increased for few polling intervals, miss
counter will reach max misses threshold and health report will be
triggered for FW health reporter. In case syndrome found on same health
poll another health report will be triggered.
Avoid two health reports on same syndrome by marking this syndrome as
already known.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Shahar Shitrit <shshitrit@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a06398687065e0c334dc5fc4d2778b5b87292e43 ]
Apparently nobody can figure out where the old logic came from, but it
seems like it has never been actually used on any supported firmware to
this day. OSLog buffers were apparently never requested.
But starting with 13.3, we actually need this implemented properly for
MTP (and later AOP) to work, so let's actually do that.
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Link: https://lore.kernel.org/r/20250226-apple-soc-misc-v2-2-c3ec37f9021b@svenpeter.dev
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 22af2fac88fa5dbc310bfe7d0b66d4de3ac47305 ]
rtkit messages as communication with the DCP firmware for framebuffer
swaps or input events are time critical so use WQ_HIGHPRI to prevent
user space CPU load to increase latency.
With kwin_wayland 6's explicit sync mode user space load was able to
delay the IOMFB rtkit communication enough to miss vsync for surface
swaps. Minimal test scenario is constantly resizing a glxgears
Xwayland window.
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Link: https://lore.kernel.org/r/20250226-apple-soc-misc-v2-3-c3ec37f9021b@svenpeter.dev
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0f05886a40fdc55016ba4d9ae0a9c41f8312f15b ]
Increase the timeout for SDM (Secure device manager) data credits from
20ms to 40ms. Internal stress tests running at 500 loops failed with the
current timeout of 20ms. At the start of a FPGA configuration, the CVP
host driver reads the transmit credits from SDM. It then sends bitstream
FPGA data to SDM based on the total credits. Each credit allows the
CVP host driver to send 4kBytes of data. There are situations whereby,
the SDM did not respond in time during testing.
Signed-off-by: Ang Tien Sung <tien.sung.ang@intel.com>
Signed-off-by: Kuhanh Murugasen Krishnan <kuhanh.murugasen.krishnan@intel.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20250212221249.2715929-1-tien.sung.ang@intel.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc4722c3598d0e2c2dbf9609a3d3198993093e2b ]
For sama7g5 and sama7d65 backup mode, we encountered a "ZQ calibrate error"
during recalibrating the impedance in BootStrap.
We found that the impedance value saved in at91_suspend_finish() before
the DDR entered self-refresh mode did not match the resistor values. The
ZDATA field in the DDR3PHY_ZQ0CR0 register uses a modified gray code to
select the different impedance setting.
But these gray code are incorrect, a workaournd from design team fixed the
bug in the calibration logic. The ZDATA contains four independent impedance
elements, but the algorithm combined the four elements into one. The elements
were fixed using properly shifted offsets.
Signed-off-by: Li Bin <bin.li@microchip.com>
[nicolas.ferre@microchip.com: fix indentation and combine 2 patches]
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Tested-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Tested-by: Durai Manickam KR <durai.manickamkr@microchip.com>
Tested-by: Andrei Simion <andrei.simion@microchip.com>
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Link: https://lore.kernel.org/r/28b33f9bcd0ca60ceba032969fe054d38f2b9577.1740671156.git.Ryan.Wanner@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 98fdaeb296f51ef08e727a7cc72e5b5c864c4f4d ]
Change the default value of spectre v2 in user mode to respect the
CONFIG_MITIGATION_SPECTRE_V2 config option.
Currently, user mode spectre v2 is set to auto
(SPECTRE_V2_USER_CMD_AUTO) by default, even if
CONFIG_MITIGATION_SPECTRE_V2 is disabled.
Set the spectre_v2 value to auto (SPECTRE_V2_USER_CMD_AUTO) if the
Spectre v2 config (CONFIG_MITIGATION_SPECTRE_V2) is enabled, otherwise
set the value to none (SPECTRE_V2_USER_CMD_NONE).
Important to say the command line argument "spectre_v2_user" overwrites
the default value in both cases.
When CONFIG_MITIGATION_SPECTRE_V2 is not set, users have the flexibility
to opt-in for specific mitigations independently. In this scenario,
setting spectre_v2= will not enable spectre_v2_user=, and command line
options spectre_v2_user and spectre_v2 are independent when
CONFIG_MITIGATION_SPECTRE_V2=n.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: David Kaplan <David.Kaplan@amd.com>
Link: https://lore.kernel.org/r/20241031-x86_bugs_last_v2-v2-2-b7ff1dab840e@debian.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 06a61b5cb6a8638fa8823cd09b17233b29696fa2 ]
The IMX8MPCEC datasheet lists maximum frequencies allowed for different
modules. Some of these limits are universal, but some depend on
whether the SoC is operating in nominal or in overdrive mode.
The imx8mp.dtsi currently assumes overdrive mode and configures some
clocks in accordance with this. Boards wishing to make use of nominal
mode will need to override some of the clock rates manually.
As operating the clocks outside of their allowed range can lead to
difficult to debug issues, it makes sense to register the maximum rates
allowed in the driver, so the CCF can take them into account.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Link: https://lore.kernel.org/r/20250218-imx8m-clk-v4-6-b7697dc2dcd0@pengutronix.de
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 254ba7e6032d3fc738050d500b0c1d8197af90ca ]
fib_valid_key_len() is called in the beginning of fib_table_insert()
or fib_table_delete() to check if the prefix length is valid.
fib_table_insert() and fib_table_delete() are called from 3 paths
- ip_rt_ioctl()
- inet_rtm_newroute() / inet_rtm_delroute()
- fib_magic()
In the first ioctl() path, rtentry_to_fib_config() checks the prefix
length with bad_mask(). Also, fib_magic() always passes the correct
prefix: 32 or ifa->ifa_prefixlen, which is already validated.
Let's move fib_valid_key_len() to the rtnetlink path, rtm_to_fib_config().
While at it, 2 direct returns in rtm_to_fib_config() are changed to
goto to match other places in the same function
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250228042328.96624-12-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aa85822c611aef7cd4dc17d27121d43e21bb82f0 ]
PC speaker works well on this platform in BIOS and in Linux until sound
card drivers are loaded. Then it stops working.
There seems to be a beep generator node at 0x1a in this CODEC
(ALC269_TYPE_ALC215) but it seems to be only connected to capture mixers
at nodes 0x22 and 0x23.
If I unmute the mixer input for 0x1a at node 0x23 and start recording
from its "ALC285 Analog" capture device I can clearly hear beeps in that
recording.
So the beep generator is indeed working properly, however I wasn't able to
figure out any way to connect it to speakers.
However, the bits in the "Passthrough Control" register (0x36) seems to
work at least partially: by zeroing "B" and "h" and setting "S" I can at
least make the PIT PC speaker output appear either in this laptop speakers
or headphones (depending on whether they are connected or not).
There are some caveats, however:
* If the CODEC gets runtime-suspended the beeps stop so it needs HDA beep
device for keeping it awake during beeping.
* If the beep generator node is generating any beep the PC beep passthrough
seems to be temporarily inhibited, so the HDA beep device has to be
prevented from using the actual beep generator node - but the beep device
is still necessary due to the previous point.
* In contrast with other platforms here beep amplification has to be
disabled otherwise the beeps output are WAY louder than they were on pure
BIOS setup.
Unless someone (from Realtek probably) knows how to make the beep generator
node output appear in speakers / headphones using PC beep passthrough seems
to be the only way to make PC speaker beeping actually work on this
platform.
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Acked-by: kailang@realtek.com
Link: https://patch.msgid.link/7461f695b4daed80f2fc4b1463ead47f04f9ad05.1739741254.git.mail@maciej.szmigiero.name
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 061c991697062f3bf87b72ed553d1d33a0e370dd ]
Currently, __reserve_bp_slot() returns -ENOSPC for unsupported
breakpoint types on the architecture. For example, powerpc
does not support hardware instruction breakpoints. This causes
the perf_skip BPF selftest to fail, as neither ENOENT nor
EOPNOTSUPP is returned by perf_event_open for unsupported
breakpoint types. As a result, the test that should be skipped
for this arch is not correctly identified.
To resolve this, hw_breakpoint_event_init() should exit early by
checking for unsupported breakpoint types using
hw_breakpoint_slots_cached() and return the appropriate error
(-EOPNOTSUPP).
Signed-off-by: Saket Kumar Bhaskar <skb99@linux.ibm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: https://lore.kernel.org/r/20250303092451.1862862-1-skb99@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2b15a0693f70d1e8119743ee89edbfb1271b3ea8 ]
Fix mpls maximum labels list parsing up to MAX_MPLS_LABELS entries (instead
of up to MAX_MPLS_LABELS - 1).
Addresses the following:
$ echo "mpls 00000f00,00000f01,00000f02,00000f03,00000f04,00000f05,00000f06,00000f07,00000f08,00000f09,00000f0a,00000f0b,00000f0c,00000f0d,00000f0e,00000f0f" > /proc/net/pktgen/lo\@0
-bash: echo: write error: Argument list too long
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a79efc44b51432490538a55b9753a721f7d3ea42 ]
The video_device for the MPEG encoder did not set device_caps.
Add this, otherwise the video device can't be registered (you get a
WARN_ON instead).
Not seen before since currently 417 support is disabled, but I found
this while experimenting with it.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 65991ea8a6d1e68effdc01d95ebe39f1653f7b71 ]
Both MSM8974 and MSM8226 have only CX as power domain with MX & PX being
handled as regulators. Handle this case by reodering pd_names to have CX
first, and handling that the driver core will already attach a single
power domain internally.
Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
[luca: minor changes]
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Link: https://lore.kernel.org/r/20250206-wcnss-singlepd-v2-2-9a53ee953dee@lucaweiss.eu
[bjorn: Added missing braces to else after multi-statement if]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b63263555eaafbf9ab1a82f2020bbee872d83759 ]
The phylink_expects_phy() function allows MAC drivers to check if they are
expecting a PHY to attach. The checking condition in phylink_expects_phy()
aims to achieve the same result as the checking condition in
phylink_attach_phy().
However, the checking condition in phylink_expects_phy() uses
pl->link_config.interface, while phylink_attach_phy() uses
pl->link_interface.
Initially, both pl->link_interface and pl->link_config.interface are set
to SGMII, and pl->cfg_link_an_mode is set to MLO_AN_INBAND.
When the interface switches from SGMII to 2500BASE-X,
pl->link_config.interface is updated by phylink_major_config().
At this point, pl->cfg_link_an_mode remains MLO_AN_INBAND, and
pl->link_config.interface is set to 2500BASE-X.
Subsequently, when the STMMAC interface is taken down
administratively and brought back up, it is blocked by
phylink_expects_phy().
Since phylink_expects_phy() and phylink_attach_phy() aim to achieve the
same result, phylink_expects_phy() should check pl->link_interface,
which never changes, instead of pl->link_config.interface, which is
updated by phylink_major_config().
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Link: https://patch.msgid.link/20250227121522.1802832-2-yong.liang.choong@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
