[ Upstream commit e0c47281723f301894c14e6f5cd5884fdfb813f9 ]
Element timeout that is below CONFIG_HZ never expires because the
timeout extension is not allocated given that nf_msecs_to_jiffies64()
returns 0. Set timeout to the minimum value to honor timeout.
Fixes: 8e1102d5a1 ("netfilter: nf_tables: support timeouts larger than 23 days")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 60949b7b805424f21326b450ca4f1806c06d982e ]
MASK_VAL() was added as a way to handle bit_offset and bit_width for
registers located in system memory address space. However, while suited
for reading, it does not work for writing and result in corrupted
registers when writing values with bit_offset > 0. Moreover, when a
register is collocated with another one at the same address but with a
different mask, the current code results in the other registers being
overwritten with 0s. The write procedure for SYSTEM_MEMORY registers
should actually read the value, mask it, update it and write it with the
updated value. Moreover, since registers can be located in the same
word, we must take care of locking the access before doing it. We should
potentially use a global lock since we don't know in if register
addresses aren't shared with another _CPC package but better not
encourage vendors to do so. Assume that registers can use the same word
inside a _CPC package and thus, use a per _CPC package lock.
Fixes: 2f4a4d63a193 ("ACPI: CPPC: Use access_width over bit_width for system memory accesses")
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Link: https://patch.msgid.link/20240826101648.95654-1-cleger@rivosinc.com
[ rjw: Dropped redundant semicolon ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6f0315330af7a57c1c00587fdfb69c7778bf1c50 ]
The test case for SME vector length changes via sigreturn use a bit too
much cut'n'paste and only actually changed the SVE vector length in the
test itself. Andre's recent factoring out of the initialisation code caused
this to be exposed and the test to start failing. Fix the test to actually
cover the thing it's supposed to test.
Fixes: 4963aeb35a ("kselftest/arm64: signal: Add SME signal handling tests")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20240829-arm64-sme-signal-vl-change-test-v1-1-42d7534cb818@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 17bf68aeb3642221e3e770399b5a52f370747ac1 ]
We make the initial value of event ctrl register as HISI_PCIE_INIT_SET
and modify according to the user options. This will make TLP headers
bandwidth only counting never take effect since HISI_PCIE_INIT_SET
configures to count the TLP payloads bandwidth. Fix this by making
the initial value of event ctrl register as 0.
Fixes: 17d573984d ("drivers/perf: hisi: Add TLP filter support")
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240829090332.28756-3-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit daecd3373a16a039ad241086e30a1ec46fc9d61f ]
Currently we set the period and record it as the initial value of the
counter without checking it's set to the hardware successfully or not.
However the counter maybe unwritable if the target event is unsupported
by the device. In such case we will pass user a wrong count:
[start counts when setting the period]
hwc->prev_count = 0x8000000000000000
device.counter_value = 0 // the counter is not set as the period
[when user reads the counter]
event->count = device.counter_value - hwc->prev_count
= 0x8000000000000000 // wrong. should be 0.
Fix this by record the hardware counter counts correctly when setting
the period.
Fixes: 8404b0fbc7 ("drivers/perf: hisi: Add driver for HiSilicon PCIe PMU")
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240829090332.28756-2-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 24cc57d8faaa4060fd58adf810b858fcfb71a02f ]
In the case where we are forcing the ps.chunk_size to be at least 1,
we are ignoring the caller's alignment.
Move the forcing of ps.chunk_size to be at least 1 before rounding it
up to caller's alignment, so that caller's alignment is honored.
While at it, use max() to force the ps.chunk_size to be at least 1 to
improve readability.
Fixes: 6d45e1c948a8 ("padata: Fix possible divide-by-0 panic in padata_mt_helper()")
Signed-off-by: Kamlesh Gurudasani <kamlesh@ti.com>
Acked-by: Waiman Long <longman@redhat.com>
Acked-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5225b6562b9a7dc808d5a1e465aaf5e2ebb220cd ]
Currently a number of SVE/SME related tests have almost identical
functions to enumerate all supported vector lengths. However over time
the copy&pasted code has diverged, allowing some bugs to creep in:
- fake_sigreturn_sme_change_vl reports a failure, not a SKIP if only
one vector length is supported (but the SVE version is fine)
- fake_sigreturn_sme_change_vl tries to set the SVE vector length, not
the SME one (but the other SME tests are fine)
- za_no_regs keeps iterating forever if only one vector length is
supported (but za_regs is correct)
Since those bugs seem to be mostly copy&paste ones, let's consolidate
the enumeration loop into one shared function, and just call that from
each test. That should fix the above bugs, and prevent similar issues
from happening again.
Fixes: 4963aeb35a ("kselftest/arm64: signal: Add SME signal handling tests")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240821164401.3598545-1-andre.przywara@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4bcda1eaf184e308f07f9c61d3a535f9ce477ce8 ]
If no page could be allocated, an error pointer was used as format
string in pr_warn.
Rearrange the code to return early in case of OOM. Also add a check
for the return value of d_path.
Fixes: f8b92ba67c ("mount: Add mount warning for impending timestamp expiry")
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Link: https://lore.kernel.org/r/20240730085856.32385-1-olaf@aepfle.de
[brauner: rewrite commit and commit message]
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7d1ffc8b087e97dbe1985912c7a2d00e53cea169 ]
Currently, KVM traps & emulates PMU counter access only if SBI PMU
is available as the guest can only configure/read PMU counters via
SBI only. However, if SBI PMU is not enabled in the host, the
guest will fallback to the legacy PMU which will try to access
cycle/instret and result in an illegal instruction trap which
is not desired.
KVM can allow dummy emulation of cycle/instret only for the guest
if SBI PMU is not enabled in the host. The dummy emulation will
still return zero as we don't to expose the host counter values
from a guest using legacy PMU.
Fixes: a9ac6c3752 ("RISC-V: KVM: Implement trap & emulate for hpmcounters")
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240816-kvm_pmu_fixes-v1-1-cdfce386dd93@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b7b282e6baea06ba65b55ae7d38326ceb79cebf ]
When forwarding SBI calls to userspace ensure sbiret.error is
initialized to SBI_ERR_NOT_SUPPORTED first, in case userspace
neglects to set it to anything. If userspace neglects it then we
can't be sure it did anything else either, so we just report it
didn't do or try anything. Just init sbiret.value to zero, which is
the preferred value to return when nothing special is specified.
KVM was already initializing both sbiret.error and sbiret.value, but
the values used appear to come from a copy+paste of the __sbi_ecall()
implementation, i.e. a0 and a1, which don't apply prior to the call
being executed, nor at all when forwarding to userspace.
Fixes: dea8ee31a0 ("RISC-V: KVM: Add SBI v0.1 support")
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20240807154943.150540-2-ajones@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 77c977327dfaa9ae2e154964cdb89ceb5c7b7cf1 ]
In 'rtw_coex_action_bt_a2dp_pan', 'wl_cpt_test' and 'bt_cpt_test' are
hardcoded to false, so corresponding 'table_case' and 'tdma_case'
assignments are never met.
Also 'rtw_coex_set_rf_para(rtwdev, chip->wl_rf_para_rx[1])' is never
executed. Assuming that CPT was never fully implemented, remove
lookalike leftovers. Compile tested only.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 76f631cb40 ("rtw88: coex: update the mechanism for A2DP + PAN")
Signed-off-by: Dmitry Kandybka <d.kandybka@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240809085310.10512-1-d.kandybka@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fc2220c9b15828319b09384e68399b4afc6276d9 ]
A few SME-related sigcontext UAPI macros leave an argument
unprotected from misparsing during macro expansion.
Add parentheses around references to macro arguments where
appropriate.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Fixes: ee072cf708 ("arm64/sme: Implement signal handling for ZT")
Fixes: 39782210eb ("arm64/sme: Implement ZA signal handling")
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240729152005.289844-1-Dave.Martin@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c70f3163681381c15686bdd2fe56bf4af9b8aaaa ]
Reference and PTP clocks rate of the Loongson GMAC devices is 125MHz.
(So is in the GNET devices which support is about to be added.) Set
the respective plat_stmmacenet_data field up in accordance with that
so to have the coalesce command and timestamping work correctly.
Fixes: 30bba69d7d ("stmmac: pci: Add dwmac support for Loongson")
Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Signed-off-by: Yinggang Gu <guyinggang@loongson.cn>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 59529c982f85047650fd473db903b23006a796c6 ]
Currently, the firmware returns incorrect pdev_id information in
WMI_PDEV_BSS_CHAN_INFO_EVENTID, leading to incorrect filling of
the pdev's survey information.
To prevent this issue, when requesting BSS channel information
through WMI_PDEV_BSS_CHAN_INFO_REQUEST_CMDID, firmware expects
pdev_id as one of the arguments in this WMI command.
Add pdev_id to the struct wmi_pdev_bss_chan_info_req_cmd and fill it
during ath12k_wmi_pdev_bss_chan_info_request(). This resolves the
issue of sending the correct pdev_id in WMI_PDEV_BSS_CHAN_INFO_EVENTID.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Fixes: d889913205 ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Signed-off-by: P Praneesh <quic_ppranees@quicinc.com>
Signed-off-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240331183232.2158756-2-quic_kathirve@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f6ffe7f0184792c2f99aca6ae5b916683973d7d3 ]
We should not be checking the return values from debugfs creation at all: the
debugfs functions are designed to handle errors of previously called functions
and just transparently abort the creation of debugfs entries when debugfs is
disabled. If we check the return value and abort driver initialisation, we break
the driver if debugfs is disabled (such as when booting with debugfs=off).
Earlier versions of ath9k accidentally did the right thing by checking the
return value, but only for NULL, not for IS_ERR(). This was "fixed" by the two
commits referenced below, breaking ath9k with debugfs=off starting from the 6.6
kernel (as reported in the Bugzilla linked below).
Restore functionality by just getting rid of the return value check entirely.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219122
Fixes: 1e4134610d ("wifi: ath9k: use IS_ERR() with debugfs_create_dir()")
Fixes: 6edb4ba6fb ("wifi: ath9k: fix parameter check in ath9k_init_debug()")
Reported-by: Daniel Tobias <dan.g.tob@gmail.com>
Tested-by: Daniel Tobias <dan.g.tob@gmail.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240805110225.19690-1-toke@toke.dk
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c6002b6c05f3edfa12fd25990cc637281f200442 ]
When the firmware interface layer was refactored it provided various
"get" and "set" functions. For the "get" in some cases a parameter
needed to be passed down to firmware as a key indicating what to
"get" turning the output parameter of the "get" function into an
input parameter as well. To accommodate this the "get" function blindly
copies the parameter which in some places resulted in an uninitialized
warnings from the compiler. These have been fixed by initializing the
input parameter in the past. Recently another batch of similar fixes
were submitted to address clang static checker warnings [1].
Proposing another solution by introducing a "query" variant which is used
when the (input) parameter is needed by firmware. The "get" variant will
only fill the (output) parameter with the result received from firmware
taking care of proper endianess conversion.
[1] https://lore.kernel.org/all/20240702122450.2213833-1-suhui@nfschina.com/
Fixes: 81f5dcb808 ("brcmfmac: refactor firmware interface layer.")
Reported-by: Su Hui <suhui@nfschina.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240727185617.253210-1-arend.vanspriel@broadcom.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 31343230abb1683e8afb254e6b13a7a7fd01fcac ]
With multi-vendor support the vendor-specific module may need to use
the firmware interface functions so export them using the macro
BRCMF_EXPORT_SYMBOL_GPL() which exports them to driver namespace.
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240103095704.135651-2-arend.vanspriel@broadcom.com
Stable-dep-of: c6002b6c05f3 ("wifi: brcmfmac: introducing fwil query functions")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ab9a244c396aae4aaa34b2399b82fc15ec2df8c1 ]
Commit c055e3eae0 ("crypto: xor - use ktime for template benchmarking")
switched from using jiffies to ktime-based performance benchmarking.
This works nicely on machines which have a fine-grained ktime()
clocksource as e.g. x86 machines with TSC.
But other machines, e.g. my 4-way HP PARISC server, don't have such
fine-grained clocksources, which is why it seems that 800 xor loops
take zero seconds, which then shows up in the logs as:
xor: measuring software checksum speed
8regs : -1018167296 MB/sec
8regs_prefetch : -1018167296 MB/sec
32regs : -1018167296 MB/sec
32regs_prefetch : -1018167296 MB/sec
Fix this with some small modifications to the existing code to improve
the algorithm to always produce correct results without introducing
major delays for architectures with a fine-grained ktime()
clocksource:
a) Delay start of the timing until ktime() just advanced. On machines
with a fast ktime() this should be just one additional ktime() call.
b) Count the number of loops. Run at minimum 800 loops and finish
earliest when the ktime() counter has progressed.
With that the throughput can now be calculated more accurately under all
conditions.
Fixes: c055e3eae0 ("crypto: xor - use ktime for template benchmarking")
Signed-off-by: Helge Deller <deller@gmx.de>
Tested-by: John David Anglin <dave.anglin@bell.net>
v2:
- clean up coding style (noticed & suggested by Herbert Xu)
- rephrased & fixed typo in commit message
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 35e6dbfe1846caeafabb49b7575adb36b0aa2269 ]
The Zynq UltraScale+ MPSoC DDR has a disjoint memory from 2GB to 32GB.
The DDR host interface has a contiguous memory so while injecting
errors, the driver should remove the hole else the injection fails as
the address translation is incorrect.
Introduce a get_mem_info() function pointer and set it for Zynq
UltraScale+ platform to return host address.
Fixes: 1a81361f75 ("EDAC, synopsys: Add Error Injection support for ZynqMP DDR controller")
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240711100656.31376-1-shubhrajyoti.datta@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 591c946675d88dcc0ae9ff54be9d5caaee8ce1e3 ]
The race condition around the ECCCLR register access happens in the IRQ
disable method called in the device remove() procedure and in the ECC IRQ
handler:
1. Enable IRQ:
a. ECCCLR = EN_CE | EN_UE
2. Disable IRQ:
a. ECCCLR = 0
3. IRQ handler:
a. ECCCLR = CLR_CE | CLR_CE_CNT | CLR_CE | CLR_CE_CNT
b. ECCCLR = 0
c. ECCCLR = EN_CE | EN_UE
So if the IRQ disabling procedure is called concurrently with the IRQ
handler method the IRQ might be actually left enabled due to the
statement 3c.
The root cause of the problem is that ECCCLR register (which since
v3.10a has been called as ECCCTL) has intermixed ECC status data clear
flags and the IRQ enable/disable flags. Thus the IRQ disabling (clear EN
flags) and handling (write 1 to clear ECC status data) procedures must
be serialised around the ECCCTL register modification to prevent the
race.
So fix the problem described above by adding the spin-lock around the
ECCCLR modifications and preventing the IRQ-handler from modifying the
IRQs enable flags (there is no point in disabling the IRQ and then
re-enabling it again within a single IRQ handler call, see the
statements 3a/3b and 3c above).
Fixes: f7824ded41 ("EDAC/synopsys: Add support for version 3 of the Synopsys EDAC DDR")
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240222181324.28242-2-fancer.lancer@gmail.com
Stable-dep-of: 35e6dbfe1846 ("EDAC/synopsys: Fix error injection on Zynq UltraScale+")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a7801540f325d104de5065850a003f1d9bdc6ad3 upstream.
The mcp251xfd wakes up from Low Power or Sleep Mode when SPI activity
is detected. To avoid this, make sure that the timestamp worker is
stopped before shutting down the chip.
Split the starting of the timestamp worker out of
mcp251xfd_timestamp_init() into the separate function
mcp251xfd_timestamp_start().
Call mcp251xfd_timestamp_init() before mcp251xfd_chip_start(), move
mcp251xfd_timestamp_start() to mcp251xfd_chip_start(). In this way,
mcp251xfd_timestamp_stop() can be called unconditionally by
mcp251xfd_chip_stop().
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 51b2a721612236335ddec4f3fb5f59e72a204f3a upstream.
To fix the coding style, remove the whitespace in front of labels.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b440396387418fe2feaacd41ca16080e7a8bc9ad upstream.
linereq_set_config() behaves badly when direction is not set.
The configuration validation is borrowed from linereq_create(), where,
to verify the intent of the user, the direction must be set to in order to
effect a change to the electrical configuration of a line. But, when
applied to reconfiguration, that validation does not allow for the unset
direction case, making it possible to clear flags set previously without
specifying the line direction.
Adding to the inconsistency, those changes are not immediately applied by
linereq_set_config(), but will take effect when the line value is next get
or set.
For example, by requesting a configuration with no flags set, an output
line with GPIO_V2_LINE_FLAG_ACTIVE_LOW and GPIO_V2_LINE_FLAG_OPEN_DRAIN
set could have those flags cleared, inverting the sense of the line and
changing the line drive to push-pull on the next line value set.
Skip the reconfiguration of lines for which the direction is not set, and
only reconfigure the lines for which direction is set.
Fixes: a54756cb24 ("gpiolib: cdev: support GPIO_V2_LINE_SET_CONFIG_IOCTL")
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20240626052925.174272-3-warthog618@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 268f84a827 which is
commmit 1474bc87fe57deac726cc10203f73daa6c3212f7 upstream.
The reverted commit is based on implementation of wiphy locking that isn't
planned to redo on a stable kernel, so revert it to avoid warning:
WARNING: CPU: 0 PID: 9 at net/wireless/core.h:231 disconnect_work+0xb8/0x144 [cfg80211]
CPU: 0 PID: 9 Comm: kworker/0:1 Not tainted 6.6.51-00141-ga1649b6f8ed6 #7
Hardware name: Freescale i.MX6 SoloX (Device Tree)
Workqueue: events disconnect_work [cfg80211]
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x58/0x70
dump_stack_lvl from __warn+0x70/0x1c0
__warn from warn_slowpath_fmt+0x16c/0x294
warn_slowpath_fmt from disconnect_work+0xb8/0x144 [cfg80211]
disconnect_work [cfg80211] from process_one_work+0x204/0x620
process_one_work from worker_thread+0x1b0/0x474
worker_thread from kthread+0x10c/0x12c
kthread from ret_from_fork+0x14/0x24
Reported-by: petter@technux.se
Closes: https://lore.kernel.org/linux-wireless/9e98937d781c990615ef27ee0c858ff9@technux.se/T/#t
Cc: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit efefd4f00c967d00ad7abe092554ffbb70c1a793 upstream.
Add missing decorator type to lookup expression and tighten WARN_ON_ONCE
check in pipapo to spot earlier that this is unset.
Fixes: 29b359cf6d95 ("netfilter: nft_set_pipapo: walk over current view on netlink dump")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 29b359cf6d95fd60730533f7f10464e95bd17c73 upstream.
The generation mask can be updated while netlink dump is in progress.
The pipapo set backend walk iterator cannot rely on it to infer what
view of the datastructure is to be used. Add notation to specify if user
wants to read/update the set.
Based on patch from Florian Westphal.
Fixes: 2b84e215f8 ("netfilter: nft_set_pipapo: .walk does not deal with generations")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7f3287db654395f9c5ddd246325ff7889f550286 upstream.
When running in container environmment, /sys/fs/cgroup/ might not be
the real root node of the sk-attached cgroup.
Example:
In container:
% stat /sys//fs/cgroup/
Device: 0,21 Inode: 2214 ..
% stat /sys/fs/cgroup/foo
Device: 0,21 Inode: 2264 ..
The expectation would be for:
nft add rule .. socket cgroupv2 level 1 "foo" counter
to match traffic from a process that got added to "foo" via
"echo $pid > /sys/fs/cgroup/foo/cgroup.procs".
However, 'level 3' is needed to make this work.
Seen from initial namespace, the complete hierarchy is:
% stat /sys/fs/cgroup/system.slice/docker-.../foo
Device: 0,21 Inode: 2264 ..
i.e. hierarchy is
0 1 2 3
/ -> system.slice -> docker-1... -> foo
... but the container doesn't know that its "/" is the "docker-1.."
cgroup. Current code will retrieve the 'system.slice' cgroup node
and store its kn->id in the destination register, so compare with
2264 ("foo" cgroup id) will not match.
Fetch "/" cgroup from ->init() and add its level to the level we try to
extract. cgroup root-level is 0 for the init-namespace or the level
of the ancestor that is exposed as the cgroup root inside the container.
In the above case, cgrp->level of "/" resolved in the container is 2
(docker-1...scope/) and request for 'level 1' will get adjusted
to fetch the actual level (3).
v2: use CONFIG_SOCK_CGROUP_DATA, eval function depends on it.
(kernel test robot)
Cc: cgroups@vger.kernel.org
Fixes: e0bb96db96 ("netfilter: nft_socket: add support for cgroupsv2")
Reported-by: Nadia Pinaeva <n.m.pinaeva@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 071d583e01c88272f6ff216d4f867f8f35e94d7d ]
Having a limit of 64 DRM devices is not good enough for modern world
where we have multi-GPU servers, SR-IOV virtual functions and virtual
devices used for testing.
Let's utilize full minor range for DRM devices.
To avoid regressing the existing userspace, we're still maintaining the
numbering scheme where 0-63 is used for primary, 64-127 is reserved
(formerly for control) and 128-191 is used for render.
For minors >= 192, we're allocating minors dynamically on a first-come,
first-served basis.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240823163048.2676257-4-michal.winiarski@intel.com
Acked-by: James Zhu <James.Zhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
