commit 4f6a6bed0bfef4b966f076f33eb4f5547226056a upstream.
Patch series "simplify split calculation", v3.
This patch (of 3):
The current calculation for splitting nodes tries to enforce a minimum
span on the leaf nodes. This code is complex and never worked correctly
to begin with, due to the min value being passed as 0 for all leaves.
The calculation should just split the data as equally as possible
between the new nodes. Note that b_end will be one more than the data,
so the left side is still favoured in the calculation.
The current code may also lead to a deficient node by not leaving enough
data for the right side of the split. This issue is also addressed with
the split calculation change.
[Liam.Howlett@Oracle.com: rephrase the change log]
Link: https://lkml.kernel.org/r/20241113031616.10530-1-richard.weiyang@gmail.com
Link: https://lkml.kernel.org/r/20241113031616.10530-2-richard.weiyang@gmail.com
Fixes: 54a611b605 ("Maple Tree: add new data structure")
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5729e06c81 upstream.
Patch series "Maple tree mas_{next,prev}_range() and cleanup", v4.
This patchset contains a number of clean ups to the code to make it more
usable (next/prev range), the addition of debug output formatting, the
addition of printing the maple state information in the WARN_ON/BUG_ON
code.
There is also work done here to keep nodes active during iterations to
reduce the necessity of re-walking the tree.
Finally, there is a new interface added to move to the next or previous
range in the tree, even if it is empty.
The organisation of the patches is as follows:
0001-0004 - Small clean ups
0005-0018 - Additional debug options and WARN_ON/BUG_ON changes
0019 - Test module __init and __exit addition
0020-0021 - More functional clean ups
0022-0026 - Changes to keep nodes active
0027-0034 - Add new mas_{prev,next}_range()
0035 - Use new mas_{prev,next}_range() in mmap_region()
This patch (of 35):
Static analyser of the maple tree code noticed that the split variable is
being used to dereference into an array prior to checking the variable
itself. Fix this issue by changing the order of the statement to check
the variable first.
Link: https://lkml.kernel.org/r/20230518145544.1722059-1-Liam.Howlett@oracle.com
Link: https://lkml.kernel.org/r/20230518145544.1722059-2-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: David Binderman <dcb314@hotmail.com>
Reviewed-by: Peng Zhang<zhangpeng.00@bytedance.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Vernon Yang <vernon2gm@gmail.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b06f388994500297bb91be60ffaf6825ecfd2afe upstream.
lockdep detects the following circular locking dependency:
CPU 0 CPU 1
========================== ============================
cdns_uart_isr() printk()
uart_port_lock(port) console_lock()
cdns_uart_console_write()
if (!port->sysrq)
uart_port_lock(port)
uart_handle_break()
port->sysrq = ...
uart_handle_sysrq_char()
printk()
console_lock()
The fixed commit attempts to avoid this situation by only taking the
port lock in cdns_uart_console_write if port->sysrq unset. However, if
(as shown above) cdns_uart_console_write runs before port->sysrq is set,
then it will try to take the port lock anyway. This may result in a
deadlock.
Fix this by splitting sysrq handling into two parts. We use the prepare
helper under the port lock and defer handling until we release the lock.
Fixes: 74ea66d4ca ("tty: xuartps: Improve sysrq handling")
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Cc: stable@vger.kernel.org # c980248179d: serial: xilinx_uartps: Use port lock wrappers
Acked-by: John Ogness <john.ogness@linutronix.de>
Link: https://lore.kernel.org/r/20250110213822.2107462-1-sean.anderson@linux.dev
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 56b824eb49d6258aa0bad09a406ceac3f643cdae upstream.
Currently the skb size after coalescing is only limited by the skb
layout (the skb must not carry frag_list). A single coalesced skb
covering several MSS can potentially fill completely the receive
buffer. In such a case, the snd win will zero until the receive buffer
will be empty again, affecting tput badly.
Fixes: 8268ed4c9d ("mptcp: introduce and use mptcp_try_coalesce()")
Cc: stable@vger.kernel.org # please delay 2 weeks after 6.13-final release
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241230-net-mptcp-rbuf-fixes-v1-3-8608af434ceb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 31ad74b20227ce6b40910ff78b1c604e42975cf1 upstream.
At present, the object->file has the NULL pointer dereference problem in
ondemand-mode. The root cause is that the allocated fd and object->file
lifetime are inconsistent, and the user-space invocation to anon_fd uses
object->file. Following is the process that triggers the issue:
[write fd] [umount]
cachefiles_ondemand_fd_write_iter
fscache_cookie_state_machine
cachefiles_withdraw_cookie
if (!file) return -ENOBUFS
cachefiles_clean_up_object
cachefiles_unmark_inode_in_use
fput(object->file)
object->file = NULL
// file NULL pointer dereference!
__cachefiles_write(..., file, ...)
Fix this issue by add an additional reference count to the object->file
before write/llseek, and decrement after it finished.
Fixes: c838305450 ("cachefiles: notify the user daemon when looking up cookie")
Signed-off-by: Zizhi Wo <wozizhi@huawei.com>
Link: https://lore.kernel.org/r/20241107110649.3980193-5-wozizhi@huawei.com
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Bin Lan <lanbincn@qq.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 05d91cdb1f9108426b14975ef4eeddf15875ca05 upstream.
Copy of the rationale from 790071347a:
Change ndo_set_mac_address to dev_set_mac_address because
dev_set_mac_address provides a way to notify network layer about MAC
change. In other case, services may not aware about MAC change and keep
using old one which set from network adapter driver.
As example, DHCP client from systemd do not update MAC address without
notification from net subsystem which leads to the problem with acquiring
the right address from DHCP server.
Since dev_set_mac_address requires RTNL lock the operation can not be
performed directly in the response handler, see
9e2bbab94b88295dcc57c7580393c9ee08d7314d.
The way of selecting the first suitable MAC address from the list is
changed, instead of having the driver check it this patch just assumes
any valid MAC should be good.
Fixes: b8291cf3d118 ("net/ncsi: Add NC-SI 1.2 Get MC MAC Address command")
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ddd068d81445b17ac0bed084dfeb9e58b4df3ddd upstream.
Declare ftrace_get_parent_ra_addr() as static to suppress clang
compiler warning that 'no previous prototype'. This function is
not intended to be called from other parts.
Fix follow error with clang-19:
arch/mips/kernel/ftrace.c:251:15: error: no previous prototype for function 'ftrace_get_parent_ra_addr' [-Werror,-Wmissing-prototypes]
251 | unsigned long ftrace_get_parent_ra_addr(unsigned long self_ra, unsigned long
| ^
arch/mips/kernel/ftrace.c:251:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
251 | unsigned long ftrace_get_parent_ra_addr(unsigned long self_ra, unsigned long
| ^
| static
1 error generated.
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When we get -EIOCBQUEUED, we need to ensure that the buffer is consumed
from the provided buffer ring, which can be done with io_kbuf_recycle()
+ REQ_F_PARTIAL_IO.
Reported-by: Muhammad Ramdhan <ramdhan@starlabs.sg>
Reported-by: Bing-Jhong Billy Jheng <billy@starlabs.sg>
Reported-by: Jacob Soo <jacob.soo@starlabs.sg>
Fixes: c7fb19428d ("io_uring: add support for ring mapped supplied buffers")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
io_req_prep_async() can import provided buffers, commit the ring state
by giving up on that before, it'll be reimported later if needed.
Reported-by: Muhammad Ramdhan <ramdhan@starlabs.sg>
Reported-by: Bing-Jhong Billy Jheng <billy@starlabs.sg>
Reported-by: Jacob Soo <jacob.soo@starlabs.sg>
Fixes: c7fb19428d ("io_uring: add support for ring mapped supplied buffers")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 459915f55509f4bfd6076daa1428e28490ddee3b upstream.
Commit 50ebd19e35 ("pinctrl: samsung: drop pin banks references on
error paths") fixed the pin bank references on the error paths of the
probe function, but there is still an error path where this is not done.
If samsung_pinctrl_get_soc_data() does not fail, the child references
will have acquired, and they will need to be released in the error path
of platform_get_irq_optional(), as it is done in the following error
paths within the probe function.
Replace the direct return in the error path with a goto instruction to
the cleanup function.
Cc: stable@vger.kernel.org
Fixes: a382d568f1 ("pinctrl: samsung: Use platform_get_irq_optional() to get the interrupt")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20241106-samsung-pinctrl-put-v1-1-de854e26dd03@gmail.com
[krzysztof: change Fixes SHA to point to commit introducing the return
leading to OF node leak]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a4dfce7559d75430c464294ddee554be2a413c4a upstream.
Currently, when either SIGINT from the user or SIGALRM from the duration
timer is caught by rtla-timerlat, stop_tracing is set to break out of
the main loop. This is not sufficient for cases where the timerlat
tracer is producing more data than rtla can consume, since in that case,
rtla is looping indefinitely inside tracefs_iterate_raw_events, never
reaches the check of stop_tracing and hangs.
In addition to setting stop_tracing, also stop the timerlat tracer on
received signal (SIGINT or SIGALRM). This will stop new samples so that
the existing samples may be processed and tracefs_iterate_raw_events
eventually exits.
Cc: stable@vger.kernel.org
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/20250116144931.649593-4-tglozar@redhat.com
Fixes: a828cd18bc ("rtla: Add timerlat tool and timelart top mode")
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c73cab9dbed04d8f65ca69177b4b21ed3e09dfa7 upstream.
Currently, when either SIGINT from the user or SIGALRM from the duration
timer is caught by rtla-timerlat, stop_tracing is set to break out of
the main loop. This is not sufficient for cases where the timerlat
tracer is producing more data than rtla can consume, since in that case,
rtla is looping indefinitely inside tracefs_iterate_raw_events, never
reaches the check of stop_tracing and hangs.
In addition to setting stop_tracing, also stop the timerlat tracer on
received signal (SIGINT or SIGALRM). This will stop new samples so that
the existing samples may be processed and tracefs_iterate_raw_events
eventually exits.
Cc: stable@vger.kernel.org
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/20250116144931.649593-3-tglozar@redhat.com
Fixes: 1eeb6328e8 ("rtla/timerlat: Add timerlat hist mode")
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bd1bbab717608757cccbbe08b0d46e6c3ed0ced5 upstream.
In application note (AN13663) for TJA1120, on page 30, there's a figure
with average PHY startup timing values following software reset.
The time it takes for SMI to become operational after software reset
ranges roughly from 500 us to 1500 us.
This commit adds 2000 us delay after MDIO write which triggers software
reset. Without this delay, soft_reset function returns an error and
prevents successful PHY init.
Cc: stable@vger.kernel.org
Fixes: b050f2f15e ("phy: nxp-c45: add driver for tja1103")
Signed-off-by: Milos Reljin <milos_reljin@outlook.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/AM8P250MB0124D258E5A71041AF2CC322E1E32@AM8P250MB0124.EURP250.PROD.OUTLOOK.COM
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6bb194d036c6e1b329dcdff459338cdd9a54802a upstream.
The NCSI state machine as it's currently implemented assumes that
transition to the next logical state is performed either explicitly by
calling `schedule_work(&ndp->work)` to re-queue itself or implicitly
after processing the predefined (ndp->pending_req_num) number of
replies. Thus to avoid the configuration FSM from advancing prematurely
and getting out of sync with the process it's essential to not skip
waiting for a reply.
This patch makes the code wait for reception of the Deselect Package
response for the last package probed before proceeding to channel
configuration.
Thanks go to Potin Lai and Cosmo Chou for the initial investigation and
testing.
Fixes: 8e13f70be0 ("net/ncsi: Probe single packages to avoid conflict")
Cc: stable@vger.kernel.org
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Link: https://patch.msgid.link/20250116152900.8656-1-fercerpav@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e966eae72762ecfdbdb82627e2cda48845b9dd66 upstream.
For non-registered buffer, fastrpc driver copies the buffer and
pass it to the remote subsystem. There is a problem with current
implementation of page size calculation which is not considering
the offset in the calculation. This might lead to passing of
improper and out-of-bounds page size which could result in
memory issue. Calculate page start and page end using the offset
adjusted address instead of absolute address.
Fixes: 02b45b47fb ("misc: fastrpc: fix remote page size calculation")
Cc: stable@kernel.org
Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20250110134239.123603-4-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6ca4ea1f88a06a04ed7b2c9c6bf9f00833b68214 upstream.
For registered buffers, fastrpc driver sends the buffer information
to remote subsystem. There is a problem with current implementation
where the page address is being sent with an offset leading to
improper buffer address on DSP. This is leads to functional failures
as DSP expects base address in page information and extracts offset
information from remote arguments. Mask the offset and pass the base
page address to DSP.
This issue is observed is a corner case when some buffer which is registered
with fastrpc framework is passed with some offset by user and then the DSP
implementation tried to read the data. As DSP expects base address and takes
care of offsetting with remote arguments, passing an offsetted address will
result in some unexpected data read in DSP.
All generic usecases usually pass the buffer as it is hence is problem is
not usually observed. If someone tries to pass offsetted buffer and then
tries to compare data at HLOS and DSP end, then the ambiguity will be observed.
Fixes: 80f3afd72b ("misc: fastrpc: consider address offset before sending to DSP")
Cc: stable@kernel.org
Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20250110134239.123603-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 70a71f8151b9879b0950668ce3ad76263261fee0 upstream.
The function do_otp_read() does not set the output parameter *retlen,
which is expected to contain the number of bytes actually read.
As a result, in onenand_otp_walk(), the tmp_retlen variable remains
uninitialized after calling do_otp_walk() and used to change
the values of the buf, len and retlen variables.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 49dc08eeda ("[MTD] [OneNAND] fix numerous races")
Cc: stable@vger.kernel.org
Signed-off-by: Ivan Stepchenko <sid@itb.spb.ru>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 698244bbb3bfd32ddf9a0b70a12b1c7d69056497 upstream.
The CPU PMU in Apple SoCs can be configured to fire its interrupt in one of
several ways, and since Apple A11 one of the methods is FIQ, but the check
of the configuration register fails to test explicitely for FIQ mode. It
tests whether the IMODE bitfield is zero or not and the PMCRO_IACT bit is
set. That results in false positives when the IMODE bitfield is not zero,
but does not have the mode PMCR0_IMODE_FIQ.
Only handle the PMC interrupt as a FIQ when the CPU PMU has been configured
to fire FIQs, i.e. the IMODE bitfield value is PMCR0_IMODE_FIQ and
PMCR0_IACT is set.
Fixes: c7708816c9 ("irqchip/apple-aic: Wire PMU interrupts")
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250118163554.16733-1-towinchenmi@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0b7f8328f988178b55ee11d772a6e1238c04d29d upstream.
The Tegra RCE (Camera) driver expects the mailbox to be empty before
processing the IVC messages. On RT kernel, the threads processing the
IVC messages (which are invoked after `mbox_chan_received_data()` is
called) may be on a different CPU or running with a higher priority
than the HSP interrupt handler thread. This can cause it to act on the
message before the mailbox gets cleared in the HSP interrupt handler
resulting in a loss of IVC notification.
Fix this by clearing the mailbox data register before calling
`mbox_chan_received_data()`.
Fixes: 8f585d1403 ("mailbox: tegra-hsp: Add tegra_hsp_sm_ops")
Fixes: 74c20dd0f8 ("mailbox: tegra-hsp: Add 128-bit shared mailbox support")
Cc: stable@vger.kernel.org
Signed-off-by: Pekka Pessi <ppessi@nvidia.com>
Signed-off-by: Kartik Rajput <kkartik@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6438ef381c183444f7f9d1de18f22661cba1e946 upstream.
Since nilfs_bmap_lookup_contig() in nilfs_fiemap() calculates its result
by being prepared to go through potentially maxblocks == INT_MAX blocks,
the value in n may experience an overflow caused by left shift of blkbits.
While it is extremely unlikely to occur, play it safe and cast right hand
expression to wider type to mitigate the issue.
Found by Linux Verification Center (linuxtesting.org) with static analysis
tool SVACE.
Link: https://lkml.kernel.org/r/20250124222133.5323-1-konishi.ryusuke@gmail.com
Fixes: 622daaff0a ("nilfs2: fiemap support")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eb3fabde15bccdf34f1c9b35a83aa4c0dacbb4ca upstream.
If ff_layout_pg_get_read()'s attempt to get a layout segment results
in -EAGAIN have ff_layout_pg_init_read() retry it after sleeping.
If "softerr" mount is used, use 'io_maxretrans' to limit the number of
attempts to get a layout segment.
This fixes a long-standing issue of O_DIRECT reads failing with
-EAGAIN (11) when using flexfiles Client Side Mirroring (CSM).
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5368a67307b3b2c347dc8965ac55b888be665934 upstream.
The '-f' parameter is there to force the kernel to emit MPTCP FASTCLOSE
by closing the connection with unread bytes in the receive queue.
The xdisconnect() helper was used to stop the connection, but it does
more than that: it will shut it down, then wait before reconnecting to
the same address. This causes the mptcp_join's "fastclose test" to fail
all the time.
This failure is due to a recent change, with commit 218cc166321f
("selftests: mptcp: avoid spurious errors on disconnect"), but that went
unnoticed because the test is currently ignored. The recent modification
only shown an existing issue: xdisconnect() doesn't need to be used
here, only the shutdown() part is needed.
Fixes: 6bf41020b7 ("selftests: mptcp: update and extend fastclose test-cases")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250204-net-mptcp-sft-conn-f-v1-1-6b470c72fffa@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8c8492ca64e79c6e0f433e8c9d2bcbd039ef83d0 upstream.
If a socket is shutdown before the connection completes, POLLERR is set
in the poll mask. However, connect ignores this as it doesn't know, and
attempts the connection again. This may lead to a bogus -ETIMEDOUT
result, where it should have noticed the POLLERR and just returned
-ECONNRESET instead.
Have the poll logic check for whether or not POLLERR is set in the mask,
and if so, mark the request as failed. Then connect can appropriately
fail the request rather than retry it.
Reported-by: Sergey Galas <ssgalas@cloud.ru>
Cc: stable@vger.kernel.org
Link: https://github.com/axboe/liburing/discussions/1335
Fixes: 3fb1bd6881 ("io_uring/net: handle -EINPROGRESS correct for IORING_OP_CONNECT")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 31507fc2ad36e0071751a710449db19c85d82a7f upstream.
When __nvmem_cell_entry_write() is called for an nvmem cell that does
not need bit shifting, it requires that the len parameter exactly
matches the nvmem cell size. However, when the nvmem cell has a nonzero
bit_offset, it was skipping this check.
Accepting values of len larger than the cell size results in
nvmem_cell_prepare_write_buffer() trying to write past the end of a heap
buffer that it allocates. Add a check to avoid that problem and instead
return -EINVAL when len doesn't match the number of bits expected by the
nvmem cell when bit_offset is nonzero.
This check uses cell->nbits in order to allow providing the smaller size
to cells that are shifted into another byte by bit_offset. For example,
a cell with nbits=8 and nonzero bit_offset would have bytes=2 but should
accept a 1-byte write here, although no current callers depend on this.
Fixes: 69aba7948c ("nvmem: Add a simple NVMEM framework for consumers")
Cc: stable@vger.kernel.org
Signed-off-by: Jennifer Berringer <jberring@redhat.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20241230141901.263976-7-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e80cf84b608725303113d6fe98bb727bf7b7a40d upstream.
If we encounter an error when registering alorithms with the crypto
framework, we just bail out and don't unregister the ones we
successfully registered in prior iterations of the loop.
Add code that goes back over the algos and unregisters them before
returning an error from qce_register_algs().
Cc: stable@vger.kernel.org
Fixes: ec8f5d8f6f ("crypto: qce - Qualcomm crypto engine driver")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6e74e53b34b6dec5a50e1404e2680852ec6768d2 upstream.
reveliofuzzing reported that a SCSI_IOCTL_SEND_COMMAND ioctl with out_len
set to 0xd42, SCSI command set to ATA_16 PASS-THROUGH, ATA command set to
ATA_NOP, and protocol set to ATA_PROT_PIO, can cause ata_pio_sector() to
write outside the allocated buffer, overwriting random memory.
While a ATA device is supposed to abort a ATA_NOP command, there does seem
to be a bug either in libata-sff or QEMU, where either this status is not
set, or the status is cleared before read by ata_sff_hsm_move().
Anyway, that is most likely a separate bug.
Looking at __atapi_pio_bytes(), it already has a safety check to ensure
that __atapi_pio_bytes() cannot write outside the allocated buffer.
Add a similar check to ata_pio_sector(), such that also ata_pio_sector()
cannot write outside the allocated buffer.
Cc: stable@vger.kernel.org
Reported-by: reveliofuzzing <reveliofuzzing@gmail.com>
Closes: https://lore.kernel.org/linux-ide/CA+-ZZ_jTgxh3bS7m+KX07_EWckSnW3N2adX3KV63y4g7M4CZ2A@mail.gmail.com/
Link: https://lore.kernel.org/r/20250127154303.15567-2-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 488b5b9eca68497b533ced059be5eff19578bbca upstream.
Memblock allocations are registered by kmemleak separately, based on their
physical address. During the scanning stage, it checks whether an object
is within the min_low_pfn and max_low_pfn boundaries and ignores it
otherwise.
With the recent addition of __percpu pointer leak detection (commit
6c99d4eb7c5e ("kmemleak: enable tracking for percpu pointers")), kmemleak
started reporting leaks in setup_zone_pageset() and
setup_per_cpu_pageset(). These were caused by the node_data[0] object
(initialised in alloc_node_data()) ending on the PFN_PHYS(max_low_pfn)
boundary. The non-strict upper boundary check introduced by commit
84c3262991 ("mm: kmemleak: check physical address when scan") causes the
pg_data_t object to be ignored (not scanned) and the __percpu pointers it
contains to be reported as leaks.
Make the max_low_pfn upper boundary check strict when deciding whether to
ignore a physical address object and not scan it.
Link: https://lkml.kernel.org/r/20250127184233.2974311-1-catalin.marinas@arm.com
Fixes: 84c3262991 ("mm: kmemleak: check physical address when scan")
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Jakub Kicinski <kuba@kernel.org>
Tested-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Cc: Patrick Wang <patrick.wang.shcn@gmail.com>
Cc: <stable@vger.kernel.org> [6.0.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6fdbff0f54786e94f0f630ff200ec1d666b1633e upstream.
ccs_limits is allocated in ccs_read_all_limits() after the allocation of
mdata.backing. Ensure that resources are freed in the reverse order of
their allocation by moving out_free_ccs_limits up.
Fixes: a11d3d6891 ("media: ccs: Read CCS static data from firmware binaries")
Cc: stable@vger.kernel.org
Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 82b696750f0b60e7513082a10ad42786854f59f8 upstream.
The length field of the CCS static data blocks was mishandled, leading to
wrong interpretation of the length header for blocks that are 16 kiB in
size. Such large blocks are very, very rare and so this wasn't found
earlier.
As the length is used as part of input validation, the issue has no
security implications.
Fixes: a6b396f410 ("media: ccs: Add CCS static data parser library")
Cc: stable@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fb2bd86270cd0ad004f4c614ba4f8c63a5720e25 upstream.
When creating links from a subdev to a sink, the current logic tries to
iterate over the endpoints of dev's fwnode.
This might not be correct when the subdev uses a different fwnode
compared to the dev's fwnode.
If, when registering, the subdev's fwnode is not set, the code inside
v4l2_async_register_subdev will set it to the dev's fwnode.
To fix this, just use the subdev's fwnode.
Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com>
Fixes: 0d3c81e82d ("media: v4l2-mc: add v4l2_create_fwnode_links helpers")
Cc: stable@vger.kernel.org
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
