[ Upstream commit 28ce50f8d9 ]
Currently iocharset=utf8 mount option is broken. To use UTF-8 as iocharset,
it is required to use utf8 mount option.
Fix iocharset=utf8 mount option to use be equivalent to the utf8 mount
option.
If UTF-8 as iocharset is used then s_nls_iocharset is set to NULL. So
simplify code around, remove s_utf8 field as to distinguish between UTF-8
and non-UTF-8 it is needed just to check if s_nls_iocharset is set to NULL
or not.
Link: https://lore.kernel.org/r/20210808162453.1653-5-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b645333443 ]
Currently iocharset=utf8 mount option is broken. To use UTF-8 as iocharset,
it is required to use utf8 mount option.
Fix iocharset=utf8 mount option to use be equivalent to the utf8 mount
option.
If UTF-8 as iocharset is used then s_nls_map is set to NULL. So simplify
code around, remove UDF_FLAG_NLS_MAP and UDF_FLAG_UTF8 flags as to
distinguish between UTF-8 and non-UTF-8 it is needed just to check if
s_nls_map set to NULL or not.
Link: https://lore.kernel.org/r/20210808162453.1653-4-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 781d2a9a2f ]
We were checking validity of LVID entries only when getting
implementation use information from LVID in udf_sb_lvidiu(). However if
the LVID is suitably corrupted, it can cause problems also to code such
as udf_count_free() which doesn't use udf_sb_lvidiu(). So check validity
of LVID already when loading it from the disk and just disable LVID
altogether when it is not valid.
Reported-by: syzbot+7fbfe5fed73ebb675748@syzkaller.appspotmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8c3b5e6ec0 ]
If high resolution timers are disabled the timerfd notification about a
clock was set event is not happening for all cases which use
clock_was_set_delayed() because that's a NOP for HIGHRES=n, which is wrong.
Make clock_was_set_delayed() unconditially available to fix that.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210713135158.196661266@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 627ef5ae2d ]
If __hrtimer_start_range_ns() is invoked with an already armed hrtimer then
the timer has to be canceled first and then added back. If the timer is the
first expiring timer then on removal the clockevent device is reprogrammed
to the next expiring timer to avoid that the pending expiry fires needlessly.
If the new expiry time ends up to be the first expiry again then the clock
event device has to reprogrammed again.
Avoid this by checking whether the timer is the first to expire and in that
case, keep the timer on the current CPU and delay the reprogramming up to
the point where the timer has been enqueued again.
Reported-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210713135157.873137732@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 406dd42bd1 ]
When an itimer deactivates a previously armed expiration, it simply doesn't
do anything. As a result the process wide cputime counter keeps running and
the tick dependency stays set until it reaches the old ghost expiration
value.
This can be reproduced with the following snippet:
void trigger_process_counter(void)
{
struct itimerval n = {};
n.it_value.tv_sec = 100;
setitimer(ITIMER_VIRTUAL, &n, NULL);
n.it_value.tv_sec = 0;
setitimer(ITIMER_VIRTUAL, &n, NULL);
}
Fix this with resetting the relevant base expiration. This is similar to
disarming a timer.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210726125513.271824-4-frederic@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 767f4b620e ]
Hypervisors likely do not expose the SMCA feature to the guest and
loading this module leads to false warnings. This module should not be
loaded in guests to begin with, but people tend to do so, especially
when testing kernels in VMs. And then they complain about those false
warnings.
Do the practical thing and do not load this module when running as a
guest to avoid all that complaining.
[ bp: Rewrite commit message. ]
Suggested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Tested-by: Kim Phillips <kim.phillips@amd.com>
Link: https://lkml.kernel.org/r/20210628172740.245689-1-Smita.KoralahalliChannabasappa@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ccfc9dd691 ]
The soft watchdog timer function checks if a virtual machine
was suspended and hence what looks like a lockup in fact
is a false positive.
This is what kvm_check_and_clear_guest_paused() does: it
tests guest PVCLOCK_GUEST_STOPPED (which is set by the host)
and if it's set then we need to touch all watchdogs and bail
out.
Watchdog timer function runs from IRQ, so PVCLOCK_GUEST_STOPPED
check works fine.
There is, however, one more watchdog that runs from IRQ, so
watchdog timer fn races with it, and that watchdog is not aware
of PVCLOCK_GUEST_STOPPED - RCU stall detector.
apic_timer_interrupt()
smp_apic_timer_interrupt()
hrtimer_interrupt()
__hrtimer_run_queues()
tick_sched_timer()
tick_sched_handle()
update_process_times()
rcu_sched_clock_irq()
This triggers RCU stalls on our devices during VM resume.
If tick_sched_handle()->rcu_sched_clock_irq() runs on a VCPU
before watchdog_timer_fn()->kvm_check_and_clear_guest_paused()
then there is nothing on this VCPU that touches watchdogs and
RCU reads stale gp stall timestamp and new jiffies value, which
makes it think that RCU has stalled.
Make RCU stall watchdog aware of PVCLOCK_GUEST_STOPPED and
don't report RCU stalls when we resume the VM.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4da13aa28 ]
A missing clock update is causing the following warning:
rq->clock_update_flags < RQCF_ACT_SKIP
WARNING: CPU: 112 PID: 2041 at kernel/sched/sched.h:1453
sub_running_bw.isra.0+0x190/0x1a0
...
CPU: 112 PID: 2041 Comm: sugov:112 Tainted: G W 5.14.0-rc1 #1
Hardware name: WIWYNN Mt.Jade Server System
B81.030Z1.0007/Mt.Jade Motherboard, BIOS 1.6.20210526 (SCP:
1.06.20210526) 2021/05/26
...
Call trace:
sub_running_bw.isra.0+0x190/0x1a0
migrate_task_rq_dl+0xf8/0x1e0
set_task_cpu+0xa8/0x1f0
try_to_wake_up+0x150/0x3d4
wake_up_q+0x64/0xc0
__up_write+0xd0/0x1c0
up_write+0x4c/0x2b0
cppc_set_perf+0x120/0x2d0
cppc_cpufreq_set_target+0xe0/0x1a4 [cppc_cpufreq]
__cpufreq_driver_target+0x74/0x140
sugov_work+0x64/0x80
kthread_worker_fn+0xe0/0x230
kthread+0x138/0x140
ret_from_fork+0x10/0x18
The task causing this is the `cppc_fie` DL task introduced by
commit 1eb5dde674 ("cpufreq: CPPC: Add support for frequency
invariance").
With CONFIG_ACPI_CPPC_CPUFREQ_FIE=y and schedutil cpufreq governor on
slow-switching system (like on this Ampere Altra WIWYNN Mt. Jade Arm
Server):
DL task `curr=sugov:112` lets `p=cppc_fie` migrate and since the latter
is in `non_contending` state, migrate_task_rq_dl() calls
sub_running_bw()->__sub_running_bw()->cpufreq_update_util()->
rq_clock()->assert_clock_updated()
on p.
Fix this by updating the clock for a non_contending task in
migrate_task_rq_dl() before calling sub_running_bw().
Reported-by: Bruno Goncalves <bgoncalv@redhat.com>
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lore.kernel.org/r/20210804135925.3734605-1-dietmar.eggemann@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fe28140b33 ]
We should not clear FLAGS_DMA_ACTIVE before omap_sham_update_dma_stop() is
done calling dma_unmap_sg(). We already clear FLAGS_DMA_ACTIVE at the
end of omap_sham_update_dma_stop().
The early clearing of FLAGS_DMA_ACTIVE is not causing issues as we do not
need to defer anything based on FLAGS_DMA_ACTIVE currently. So this can be
applied as clean-up.
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Tero Kristo <kristo@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit caa534c3ba ]
When fuel_gauge_reg_readb()/_writeb() fails, report which register we
were trying to read / write when the error happened.
Also reword the message a bit:
- Drop the axp288 prefix, dev_err() already prints this
- Switch from telegram / abbreviated style to a normal sentence, aligning
the message with those from fuel_gauge_read_*bit_word()
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f95091536f ]
It is possible for sched_getattr() to incorrectly report the state of
the reset_on_fork flag when called on a deadline task.
Indeed, if the flag was set on a deadline task using sched_setattr()
with flags (SCHED_FLAG_RESET_ON_FORK | SCHED_FLAG_KEEP_PARAMS), then
p->sched_reset_on_fork will be set, but __setscheduler() will bail out
early, which means that the dl_se->flags will not get updated by
__setscheduler_params()->__setparam_dl(). Consequently, if
sched_getattr() is then called on the task, __getparam_dl() will
override kattr.sched_flags with the now out-of-date copy in dl_se->flags
and report the stale value to userspace.
To fix this, make sure to only copy the flags that are relevant to
sched_deadline to and from the dl_se->flags field.
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210727101103.2729607-2-qperret@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit df6313d707 ]
After calling dma_map_single(), we must also call dma_mapping_error().
This fixes the following warning when compiling with CONFIG_DMA_API_DEBUG:
[ 311.241478] WARNING: CPU: 0 PID: 428 at kernel/dma/debug.c:1027 check_unmap+0x79c/0x96c
[ 311.249547] DMA-API: mxs-dcp 2280000.crypto: device driver failed to check map error[device address=0x00000000860cb080] [size=32 bytes] [mapped as single]
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 048661a1f9 ]
Yanfei reported that setting HANDOFF should not depend on recomputing
@first, only on @first state. Which would then give:
if (ww_ctx || !first)
first = __mutex_waiter_is_first(lock, &waiter);
if (first)
__mutex_set_flag(lock, MUTEX_FLAG_HANDOFF);
But because 'ww_ctx || !first' is basically 'always' and the test for
first is relatively cheap, omit that first branch entirely.
Reported-by: Yanfei Xu <yanfei.xu@windriver.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Waiman Long <longman@redhat.com>
Reviewed-by: Yanfei Xu <yanfei.xu@windriver.com>
Link: https://lore.kernel.org/r/20210630154114.896786297@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
For Isochronous endpoints, the SS companion descriptor's
wBytesPerInterval field is required to reserve bus time in order
to transmit the required payload during the service interval.
If left at 0, the UAC2 function is unable to transact data on its
playback or capture endpoints in SuperSpeed mode.
Since f_uac2 currently does not support any bursting this value can
be exactly equal to the calculated wMaxPacketSize.
Tested with Windows 10 as a host.
Fixes: f8cb3d556b ("usb: f_uac2: adds support for SS and SSP")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Link: https://lore.kernel.org/r/20210909174811.12534-3-jackp@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bug: 199044440
Change-Id: Ibf183102d577aa02746822d145d63a1c767557d2
(cherry picked from commit f0e8a206a2https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git usb-linus)
[jackp: Resolved merge conflict in f_uac2.c due to added code in upstream]
Signed-off-by: Jack Pham <jackp@codeaurora.org>
This reverts commit ab9ceb4334.
The change ended up getting reworked in upstream, so revert and
reapply the latest change that merged.
Bug: 199044440
Change-Id: If03d1c4a063e182e02b4a9b55c6e702ce860c2e0
Signed-off-by: Jack Pham <jackp@codeaurora.org>
pm_runtime_force_suspend/pm_runtime_force_resume will not work
if the device is in suspend when pm_runtime is disabled.
Change-Id: I7179ecab2b059b43fab6d84683e52ae5c21096ae
Signed-off-by: Liang Chen <cl@rock-chips.com>
Using BBT in flash to avoid frequently flash operation for bbt info.
And it's secure to record the bad block info in bbt instead of
programing to the bad block with extremely unstable performance directly.
Change-Id: Icfe816c2c17ff3b747ce0a2512b1d9d6d0129fa0
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
During BC_FREE_BUFFER processing, the BINDER_TYPE_FDA object
cleanup may close 1 or more fds. The close operations are
completed using the task work mechanism -- which means the thread
needs to return to userspace or the file object may never be
dereferenced -- which can lead to hung processes.
Force the binder thread back to userspace if an fd is closed during
BC_FREE_BUFFER handling.
Fixes: 80cd795630 ("binder: fix use-after-free due to ksys_close() during fdget()")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Martijn Coenen <maco@android.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Todd Kjos <tkjos@google.com>
Link: https://lore.kernel.org/r/20210830195146.587206-1-tkjos@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bug: 111997867
(cherry picked from commit 5fdb55c1ac
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git
Change-Id: Idffa9b54edfc289d95b24f7ae2aa11ae494c7158
It is observed that certain file accesses are failing when
speculative file faults are enabled via "allow_file_spec_access".
This is because of not unlocking the page on error in
filemap_map_pages, and the locked page causes endless retry of
fault.
Bug: 199706590
Fixes: 35eacb5c87 ("ANDROID: mm: allow vmas with vm_ops to be speculatively handled")
Change-Id: Ic7643ea8188aa281754318866fde09eea094c5da
Signed-off-by: Vinayak Menon <vinmenon@codeaurora.org>
1.cherry-pick from kernel-4.19
2.fix compile errors and adapt to kernel-5.10
Signed-off-by: Dingxian Wen <shawn.wen@rock-chips.com>
Change-Id: I5dc11d3c8a2559303d96b3206fafadb46f95ed0f
Signed-off-by: Jianwei Fan <jianwei.fan@rock-chips.com>
DPTX implements the programmable SSC down-spreading with up to
0.5% modulation amplitude and 30k/33k modulation frequency.
Change-Id: I2c3eae8f27c84eb1b22eac8973691e0276c1588e
Signed-off-by: Wyon Bi <bivvy.bi@rock-chips.com>
Currently cgroup freezer is used to freeze the application threads, and
BINDER_FREEZE is used to freeze the corresponding binder interface.
There's already a mechanism in ioctl(BINDER_FREEZE) to wait for any
existing transactions to drain out before actually freezing the binder
interface.
But freezing an app requires 2 steps, freezing the binder interface with
ioctl(BINDER_FREEZE) and then freezing the application main threads with
cgroupfs. This is not an atomic operation. The following race issue
might happen.
1) Binder interface is frozen by ioctl(BINDER_FREEZE);
2) Main thread A initiates a new sync binder transaction to process B;
3) Main thread A is frozen by "echo 1 > cgroup.freeze";
4) The response from process B reaches the frozen thread, which will
unexpectedly fail.
This patch provides a mechanism to check if there's any new pending
transaction happening between ioctl(BINDER_FREEZE) and freezing the
main thread. If there's any, the main thread freezing operation can
be rolled back to finish the pending transaction.
Furthermore, the response might reach the binder driver before the
rollback actually happens. That will still cause failed transaction.
As the other process doesn't wait for another response of the response,
the response transaction failure can be fixed by treating the response
transaction like an oneway/async one, allowing it to reach the frozen
thread. And it will be consumed when the thread gets unfrozen later.
NOTE: This patch reuses the existing definition of struct
binder_frozen_status_info but expands the bit assignments of __u32
member sync_recv.
To ensure backward compatibility, bit 0 of sync_recv still indicates
there's an outstanding sync binder transaction. This patch adds new
information to bit 1 of sync_recv, indicating the binder transaction
happens exactly when there's a race.
If an existing userspace app runs on a new kernel, a sync binder call
will set bit 0 of sync_recv so ioctl(BINDER_GET_FROZEN_INFO) still
return the expected value (true). The app just doesn't check bit 1
intentionally so it doesn't have the ability to tell if there's a race.
This behavior is aligned with what happens on an old kernel which
doesn't set bit 1 at all.
A new userspace app can 1) check bit 0 to know if there's a sync binder
transaction happened when being frozen - same as before; and 2) check
bit 1 to know if that sync binder transaction happened exactly when
there's a race - a new information for rollback decision.
Fixes: 432ff1e916 ("binder: BINDER_FREEZE ioctl")
Acked-by: Todd Kjos <tkjos@google.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Li Li <dualli@google.com>
Test: stress test with apps being frozen and initiating binder calls at
the same time, confirmed the pending transactions succeeded.
Link: https://lore.kernel.org/r/20210910164210.2282716-2-dualli@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bug: 198493121
(cherry picked from commit b564171ade
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git
char-misc-linus)
Change-Id: I488ba75056f18bb3094ba5007027b76b5caebec9
No need to use CONFIG_MALI_BIFROST_FOR_LINUX
after px30/rk3326 Android and Linux device
use the same bifrost_device_driver "drivers/gpu/arm/bifrost".
Signed-off-by: Zhen Chen <chenzhen@rock-chips.com>
Change-Id: Ia4c9c79be2c10d5d708a8ea1bb4bc5d49c97267b
Because they are no longer useful,
after rk3288/rk3399 Android and Linux device
use the same midgard_device_driver "drivers/gpu/arm/midgard".
Change-Id: I7ccc3c99fdfdde5a0ea12a7f3e1931fd5f1ce4cb
Signed-off-by: Zhen Chen <chenzhen@rock-chips.com>
RK3568 USB DWC3 controllers require to disable receiver detection
in P3 for correct detection of USB devices. And this quirk to set
the GUSB3PIPECTL.DISRXDETINP3, then the DWC3 core will change the
PHY power state to P2 and then perform receiver detection. After
receiver detection, the DWC3 core will change the PHY power state
to P3 state.
Signed-off-by: William Wu <william.wu@rock-chips.com>
Change-Id: Iaad3f7ce2c4dee1788539781e3bcfbb39458f5d6
According to the programming guide, it needs to reset the
device with DCTL.CSftRst when switching from host to device.
The current code use dwc3_core_soft_reset() to do DCTL.CSftRst,
it will also duplicate phy init which has been done in runtime
resume routine, this cause the phy init/exit operations are
unbalanced.
Without this patch, the dwc3 gadget resume fail on RK3568 EVB1
with the following log:
dwc3 fcc00000.dwc3: failed to enable ep0out
It's because that the init_count of usb3 phy is not 0 when
resume, so the dwc3 fail to call usb3 phy init, and the 3.0
pipe clock is not be running.
Fixes: b48bcb27ae ("FROMGIT: usb: dwc3: core: Do core softreset when switch mode")
Signed-off-by: William Wu <william.wu@rock-chips.com>
Change-Id: I58ec26f9f007c94f8979eeeb9a9d683c6db9548f
The latest android12-5.10 tree added a number of new symbols to track.
So we must update the .xml file to also track these symbols.
Fixes: 639159686b (" Merge branch 'android12-5.10' into `android12-5.10-lts`")
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I65925ac955509919bd2bb49ea0fe7456eb9552a3
This reverts commit d24347e2ff which is
commit c762a2b846 upstream.
It does nothing but mess with the CRC values of a number of structures.
This is why people hate the kernel's crc "detection" logic as sometimes
it does very odd things.
So revert it, to preserve the KABI reporting, no functional change at
all.
Fixes: c8de3a470a ("Merge 5.10.64 into android12-5.10-lts")
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I4611b93aa3c192b82b2c2283ef6a33b19fac0e64
Changes in 5.10.64
igmp: Add ip_mc_list lock in ip_check_mc_rcu
USB: serial: mos7720: improve OOM-handling in read_mos_reg()
net: ll_temac: Remove left-over debug message
mm/page_alloc: speed up the iteration of max_order
net: kcov: don't select SKB_EXTENSIONS when there is no NET
serial: 8250: 8250_omap: Fix unused variable warning
net: linux/skbuff.h: combine SKB_EXTENSIONS + KCOV handling
tty: drop termiox user definitions
Revert "r8169: avoid link-up interrupt issue on RTL8106e if user enables ASPM"
x86/events/amd/iommu: Fix invalid Perf result due to IOMMU PMC power-gating
blk-mq: fix kernel panic during iterating over flush request
blk-mq: fix is_flush_rq
netfilter: nftables: avoid potential overflows on 32bit arches
netfilter: nf_tables: initialize set before expression setup
netfilter: nftables: clone set element expression template
blk-mq: clearing flush request reference in tags->rqs[]
ALSA: usb-audio: Add registration quirk for JBL Quantum 800
usb: host: xhci-rcar: Don't reload firmware after the completion
usb: gadget: tegra-xudc: fix the wrong mult value for HS isoc or intr
usb: mtu3: restore HS function when set SS/SSP
usb: mtu3: use @mult for HS isoc or intr
usb: mtu3: fix the wrong HS mult value
xhci: fix even more unsafe memory usage in xhci tracing
xhci: fix unsafe memory usage in xhci tracing
x86/reboot: Limit Dell Optiplex 990 quirk to early BIOS versions
PCI: Call Max Payload Size-related fixup quirks early
Linux 5.10.64
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I2269075a6d5eb6121b6e42a28d4f3fd0c252695c
