mirror of
https://github.com/hardkernel/linux.git
synced 2026-06-05 10:31:46 +09:00
0b5ccf9a4e9ea526a156051ce7ec8698bcc1a802
1160388 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Maciej S. Szmigiero
|
0b5ccf9a4e |
net: wwan: iosm: Fix hibernation by re-binding the driver around it
[ Upstream commit 0b6f6593aa8c3a05f155c12fd0e7ad33a5149c31 ] Currently, the driver is seriously broken with respect to the hibernation (S4): after image restore the device is back into IPC_MEM_EXEC_STAGE_BOOT (which AFAIK means bootloader stage) and needs full re-launch of the rest of its firmware, but the driver restore handler treats the device as merely sleeping and just sends it a wake-up command. This wake-up command times out but device nodes (/dev/wwan*) remain accessible. However attempting to use them causes the bootloader to crash and enter IPC_MEM_EXEC_STAGE_CD_READY stage (which apparently means "a crash dump is ready"). It seems that the device cannot be re-initialized from this crashed stage without toggling some reset pin (on my test platform that's apparently what the device _RST ACPI method does). While it would theoretically be possible to rewrite the driver to tear down the whole MUX / IPC layers on hibernation (so the bootloader does not crash from improper access) and then re-launch the device on restore this would require significant refactoring of the driver (believe me, I've tried), since there are quite a few assumptions hard-coded in the driver about the device never being partially de-initialized (like channels other than devlink cannot be closed, for example). Probably this would also need some programming guide for this hardware. Considering that the driver seems orphaned [1] and other people are hitting this issue too [2] fix it by simply unbinding the PCI driver before hibernation and re-binding it after restore, much like USB_QUIRK_RESET_RESUME does for USB devices that exhibit a similar problem. Tested on XMM7360 in HP EliteBook 855 G7 both with s2idle (which uses the existing suspend / resume handlers) and S4 (which uses the new code). [1]: https://lore.kernel.org/all/c248f0b4-2114-4c61-905f-466a786bdebb@leemhuis.info/ [2]: https://github.com/xmm7360/xmm7360-pci/issues/211#issuecomment-1804139413 Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Link: https://patch.msgid.link/e60287ebdb0ab54c4075071b72568a40a75d0205.1736372610.git.mail@maciej.szmigiero.name Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> |
||
|
Mazin Al Haddad
|
75e65b983c |
Bluetooth: MGMT: Fix slab-use-after-free Read in mgmt_remove_adv_monitor_sync
[ Upstream commit 26fbd3494a7dd26269cb0817c289267dbcfdec06 ] This fixes the following crash: ================================================================== BUG: KASAN: slab-use-after-free in mgmt_remove_adv_monitor_sync+0x3a/0xd0 net/bluetooth/mgmt.c:5543 Read of size 8 at addr ffff88814128f898 by task kworker/u9:4/5961 CPU: 1 UID: 0 PID: 5961 Comm: kworker/u9:4 Not tainted 6.12.0-syzkaller-10684-gf1cd565ce577 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Workqueue: hci0 hci_cmd_sync_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x169/0x550 mm/kasan/report.c:489 kasan_report+0x143/0x180 mm/kasan/report.c:602 mgmt_remove_adv_monitor_sync+0x3a/0xd0 net/bluetooth/mgmt.c:5543 hci_cmd_sync_work+0x22b/0x400 net/bluetooth/hci_sync.c:332 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xa63/0x1850 kernel/workqueue.c:3310 worker_thread+0x870/0xd30 kernel/workqueue.c:3391 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Allocated by task 16026: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x98/0xb0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __kmalloc_cache_noprof+0x243/0x390 mm/slub.c:4314 kmalloc_noprof include/linux/slab.h:901 [inline] kzalloc_noprof include/linux/slab.h:1037 [inline] mgmt_pending_new+0x65/0x250 net/bluetooth/mgmt_util.c:269 mgmt_pending_add+0x36/0x120 net/bluetooth/mgmt_util.c:296 remove_adv_monitor+0x102/0x1b0 net/bluetooth/mgmt.c:5568 hci_mgmt_cmd+0xc47/0x11d0 net/bluetooth/hci_sock.c:1712 hci_sock_sendmsg+0x7b8/0x11c0 net/bluetooth/hci_sock.c:1832 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:726 sock_write_iter+0x2d7/0x3f0 net/socket.c:1147 new_sync_write fs/read_write.c:586 [inline] vfs_write+0xaeb/0xd30 fs/read_write.c:679 ksys_write+0x18f/0x2b0 fs/read_write.c:731 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 16022: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:582 poison_slab_object mm/kasan/common.c:247 [inline] __kasan_slab_free+0x59/0x70 mm/kasan/common.c:264 kasan_slab_free include/linux/kasan.h:233 [inline] slab_free_hook mm/slub.c:2338 [inline] slab_free mm/slub.c:4598 [inline] kfree+0x196/0x420 mm/slub.c:4746 mgmt_pending_foreach+0xd1/0x130 net/bluetooth/mgmt_util.c:259 __mgmt_power_off+0x183/0x430 net/bluetooth/mgmt.c:9550 hci_dev_close_sync+0x6c4/0x11c0 net/bluetooth/hci_sync.c:5208 hci_dev_do_close net/bluetooth/hci_core.c:483 [inline] hci_dev_close+0x112/0x210 net/bluetooth/hci_core.c:508 sock_do_ioctl+0x158/0x460 net/socket.c:1209 sock_ioctl+0x626/0x8e0 net/socket.c:1328 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl+0xf5/0x170 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Reported-by: syzbot+479aff51bb361ef5aa18@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=479aff51bb361ef5aa18 Tested-by: syzbot+479aff51bb361ef5aa18@syzkaller.appspotmail.com Signed-off-by: Mazin Al Haddad <mazin@getstate.dev> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> |
||
|
Borislav Petkov
|
87fc26b018 |
APEI: GHES: Have GHES honor the panic= setting
[ Upstream commit 5c0e00a391dd0099fe95991bb2f962848d851916 ] The GHES driver overrides the panic= setting by force-rebooting the system after a fatal hw error has been reported. The intent being that such an error would be reported earlier. However, this is not optimal when a hard-to-debug issue requires long time to reproduce and when that happens, the box will get rebooted after 30 seconds and thus destroy the whole hw context of when the error happened. So rip out the default GHES panic timeout and honor the global one. In the panic disabled (panic=0) case, the error will still be logged to dmesg for later inspection and if panic after a hw error is really required, then that can be controlled the usual way - use panic= on the cmdline or set it in the kernel .config's CONFIG_PANIC_TIMEOUT. Reported-by: Feng Tang <feng.tang@linux.alibaba.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Feng Tang <feng.tang@linux.alibaba.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Link: https://patch.msgid.link/20250113125224.GFZ4UMiNtWIJvgpveU@fat_crate.local Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> |
||
|
Randolph Ha
|
f2e5a46a27 |
i2c: Force ELAN06FA touchpad I2C bus freq to 100KHz
[ Upstream commit bfd74cd1fbc026f04446e67d6915c7e199c2bffd ] When a 400KHz freq is used on this model of ELAN touchpad in Linux, excessive smoothing (similar to when the touchpad's firmware detects a noisy signal) is sometimes applied. As some devices' (e.g, Lenovo V15 G4) ACPI tables specify a 400KHz frequency for this device and some I2C busses (e.g, Designware I2C) default to a 400KHz freq, force the speed to 100KHz as a workaround. For future investigation: This problem may be related to the default HCNT/LCNT values given by some busses' drivers, because they are not specified in the aforementioned devices' ACPI tables, and because the device works without issues on Windows at what is expected to be a 400KHz frequency. The root cause of the issue is not known. Signed-off-by: Randolph Ha <rha051117@gmail.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Sasha Levin <sashal@kernel.org> |
||
|
Miri Korenblit
|
7ce13d8b59 |
wifi: iwlwifi: avoid memory leak
[ Upstream commit 80e96206a3ef348fbd658d98f2f43149c36df8bc ] A caller of iwl_acpi_get_dsm_object must free the returned object. iwl_acpi_get_dsm_integer returns immediately without freeing it if the expected size is more than 8 bytes. Fix that. Note that with the current code this will never happen, since the caller of iwl_acpi_get_dsm_integer already checks that the expected size if either 1 or 4 bytes, so it can't exceed 8 bytes. While at it, print the DSM value instead of the return value, as this was the intention in the first place. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241228223206.bf61eaab99f8.Ibdc5df02f885208c222456d42c889c43b7e3b2f7@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> |
||
|
Stefan Dösinger
|
af525a8b2a |
wifi: brcmfmac: Check the return value of of_property_read_string_index()
[ Upstream commit 082d9e263af8de68f0c34f67b251818205160f6e ] Somewhen between 6.10 and 6.11 the driver started to crash on my MacBookPro14,3. The property doesn't exist and 'tmp' remains uninitialized, so we pass a random pointer to devm_kstrdup(). The crash I am getting looks like this: BUG: unable to handle page fault for address: 00007f033c669379 PF: supervisor read access in kernel mode PF: error_code(0x0001) - permissions violation PGD 8000000101341067 P4D 8000000101341067 PUD 101340067 PMD 1013bb067 PTE 800000010aee9025 Oops: Oops: 0001 [#1] SMP PTI CPU: 4 UID: 0 PID: 827 Comm: (udev-worker) Not tainted 6.11.8-gentoo #1 Hardware name: Apple Inc. MacBookPro14,3/Mac-551B86E5744E2388, BIOS 529.140.2.0.0 06/23/2024 RIP: 0010:strlen+0x4/0x30 Code: f7 75 ec 31 c0 c3 cc cc cc cc 48 89 f8 c3 cc cc cc cc 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa <80> 3f 00 74 14 48 89 f8 48 83 c0 01 80 38 00 75 f7 48 29 f8 c3 cc RSP: 0018:ffffb4aac0683ad8 EFLAGS: 00010202 RAX: 00000000ffffffea RBX: 00007f033c669379 RCX: 0000000000000001 RDX: 0000000000000cc0 RSI: 00007f033c669379 RDI: 00007f033c669379 RBP: 00000000ffffffea R08: 0000000000000000 R09: 00000000c0ba916a R10: ffffffffffffffff R11: ffffffffb61ea260 R12: ffff91f7815b50c8 R13: 0000000000000cc0 R14: ffff91fafefffe30 R15: ffffb4aac0683b30 FS: 00007f033ccbe8c0(0000) GS:ffff91faeed00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f033c669379 CR3: 0000000107b1e004 CR4: 00000000003706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x149/0x4c0 ? raw_spin_rq_lock_nested+0xe/0x20 ? sched_balance_newidle+0x22b/0x3c0 ? update_load_avg+0x78/0x770 ? exc_page_fault+0x6f/0x150 ? asm_exc_page_fault+0x26/0x30 ? __pfx_pci_conf1_write+0x10/0x10 ? strlen+0x4/0x30 devm_kstrdup+0x25/0x70 brcmf_of_probe+0x273/0x350 [brcmfmac] Signed-off-by: Stefan Dösinger <stefan@codeweavers.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20250106170958.3595-1-stefan@codeweavers.com Signed-off-by: Sasha Levin <sashal@kernel.org> |
||
|
Vadim Fedorenko
|
67adfca904 |
net/mlx5: use do_aux_work for PHC overflow checks
[ Upstream commit e61e6c415ba9ff2b32bb6780ce1b17d1d76238f1 ] The overflow_work is using system wq to do overflow checks and updates for PHC device timecounter, which might be overhelmed by other tasks. But there is dedicated kthread in PTP subsystem designed for such things. This patch changes the work queue to proper align with PTP subsystem and to avoid overloading system work queue. The adjfine() function acts the same way as overflow check worker, we can postpone ptp aux worker till the next overflow period after adjfine() was called. Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Vadim Fedorenko <vadfed@meta.com> Acked-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20250107104812.380225-1-vadfed@meta.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> |
||
|
Even Xu
|
408c7704ce |
HID: Wacom: Add PCI Wacom device support
[ Upstream commit c4c123504a65583e3689b3de04a61dc5272e453a ] Add PCI device ID of wacom device into driver support list. Signed-off-by: Even Xu <even.xu@intel.com> Tested-by: Tatsunosuke Tobita <tatsunosuke.tobita@wacom.com> Reviewed-by: Ping Cheng <ping.cheng@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org> |
||
|
Hans de Goede
|
abf856bd8e |
mfd: lpc_ich: Add another Gemini Lake ISA bridge PCI device-id
[ Upstream commit 1e89d21f8189d286f80b900e1b7cf57cb1f3037e ] On N4100 / N4120 Gemini Lake SoCs the ISA bridge PCI device-id is 31e8 rather the 3197 found on e.g. the N4000 / N4020. While at fix the existing GLK PCI-id table entry breaking the table being sorted by device-id. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andy@kernel.org> Link: https://lore.kernel.org/r/20241114193808.110132-1-hdegoede@redhat.com Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> |
||
|
Tetsuo Handa
|
a01c200fa7 |
tomoyo: don't emit warning in tomoyo_write_control()
[ Upstream commit 3df7546fc03b8f004eee0b9e3256369f7d096685 ] syzbot is reporting too large allocation warning at tomoyo_write_control(), for one can write a very very long line without new line character. To fix this warning, I use __GFP_NOWARN rather than checking for KMALLOC_MAX_SIZE, for practically a valid line should be always shorter than 32KB where the "too small to fail" memory-allocation rule applies. One might try to write a valid line that is longer than 32KB, but such request will likely fail with -ENOMEM. Therefore, I feel that separately returning -EINVAL when a line is longer than KMALLOC_MAX_SIZE is redundant. There is no need to distinguish over-32KB and over-KMALLOC_MAX_SIZE. Reported-by: syzbot+7536f77535e5210a5c76@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=7536f77535e5210a5c76 Reported-by: Leo Stone <leocstone@gmail.com> Closes: https://lkml.kernel.org/r/20241216021459.178759-2-leocstone@gmail.com Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Sasha Levin <sashal@kernel.org> |
||
|
Dmitry Antipov
|
ada9df08b3 |
wifi: brcmsmac: add gain range check to wlc_phy_iqcal_gainparams_nphy()
[ Upstream commit 3f4a0948c3524ae50f166dbc6572a3296b014e62 ] In 'wlc_phy_iqcal_gainparams_nphy()', add gain range check to WARN() instead of possible out-of-bounds 'tbl_iqcal_gainparams_nphy' access. Compile tested only. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241210070441.836362-1-dmantipov@yandex.ru Signed-off-by: Sasha Levin <sashal@kernel.org> |
||
|
Shawn Lin
|
d795108824 |
mmc: core: Respect quirk_max_rate for non-UHS SDIO card
[ Upstream commit a2a44f8da29352f76c99c6904ee652911b8dc7dd ] The card-quirk was added to limit the clock-rate for a card with UHS-mode support, although let's respect the quirk for non-UHS mode too, to make the behaviour consistent. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Message-ID: <1732268242-72799-1-git-send-email-shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> |
||
|
Stas Sergeev
|
b2c0850a31 |
tun: fix group permission check
[ Upstream commit 3ca459eaba1bf96a8c7878de84fa8872259a01e3 ] Currently tun checks the group permission even if the user have matched. Besides going against the usual permission semantic, this has a very interesting implication: if the tun group is not among the supplementary groups of the tun user, then effectively no one can access the tun device. CAP_SYS_ADMIN still can, but its the same as not setting the tun ownership. This patch relaxes the group checking so that either the user match or the group match is enough. This avoids the situation when no one can access the device even though the ownership is properly set. Also I simplified the logic by removing the redundant inversions: tun_not_capable() --> !tun_capable() Signed-off-by: Stas Sergeev <stsp2@yandex.ru> Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://patch.msgid.link/20241205073614.294773-1-stsp2@yandex.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> |
||
|
Leo Stone
|
a0dec65f88 |
safesetid: check size of policy writes
[ Upstream commit f09ff307c7299392f1c88f763299e24bc99811c7 ] syzbot attempts to write a buffer with a large size to a sysfs entry with writes handled by handle_policy_update(), triggering a warning in kmalloc. Check the size specified for write buffers before allocating. Reported-by: syzbot+4eb7a741b3216020043a@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=4eb7a741b3216020043a Signed-off-by: Leo Stone <leocstone@gmail.com> [PM: subject tweak] Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Sasha Levin <sashal@kernel.org> |
||
|
Hermes Wu
|
505899fb11 |
drm/bridge: it6505: fix HDCP CTS compare V matching
[ Upstream commit 0989c02c7a5c887c70afeae80c64d0291624e1a7 ] When HDCP negotiation with a repeater device. Checking SHA V' matching must retry 3 times before restarting HDCP. Signed-off-by: Hermes Wu <hermes.wu@ite.com.tw> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241230-v7-upstream-v7-8-e0fdd4844703@ite.corp-partner.google.com Signed-off-by: Sasha Levin <sashal@kernel.org> |
||
|
Hermes Wu
|
2bdeb89b8a |
drm/bridge: it6505: fix HDCP encryption when R0 ready
[ Upstream commit 8c01b0bae2f9e58f2fee0e811cb90d8331986554 ] When starting HDCP authentication, HDCP encryption should be enabled when R0'is checked. Change encryption enables time at R0' ready. The hardware HDCP engine trigger is changed and the repeater KSV fails will restart HDCP. Signed-off-by: Hermes Wu <hermes.wu@ite.com.tw> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241230-v7-upstream-v7-6-e0fdd4844703@ite.corp-partner.google.com Signed-off-by: Sasha Levin <sashal@kernel.org> |
||
|
Hermes Wu
|
8c335d1441 |
drm/bridge: it6505: fix HDCP Bstatus check
[ Upstream commit 0fd2ff47d8c207fa3173661de04bb9e8201c0ad2 ] When HDCP is activated, a DisplayPort source receiving CP_IRQ from the sink shall check Bstatus from DPCD and process the corresponding value Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Hermes Wu <hermes.wu@ite.com.tw> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241230-v7-upstream-v7-5-e0fdd4844703@ite.corp-partner.google.com Signed-off-by: Sasha Levin <sashal@kernel.org> |
||
|
Hermes Wu
|
385b842b91 |
drm/bridge: it6505: Change definition MAX_HDCP_DOWN_STREAM_COUNT
[ Upstream commit 85597bc0d70c287ba41f17d14d3d857a38a3d727 ] A HDCP source device shall support max downstream to 127 devices. Change definition MAX_HDCP_DOWN_STREAM_COUNT to 127 KSVs shall save for DRM blocked devices check. This results in struct it6505 growth by ~0.5 KiB. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Hermes Wu <hermes.wu@ite.com.tw> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241230-v7-upstream-v7-4-e0fdd4844703@ite.corp-partner.google.com Signed-off-by: Sasha Levin <sashal@kernel.org> |
||
|
Fangzhi Zuo
|
231ebd6ee9 |
drm/amd/display: Fix Mode Cutoff in DSC Passthrough to DP2.1 Monitor
[ Upstream commit e56ad45e991128bf4db160b75a1d9f647a341d8f ] Source --> DP2.1 MST hub --> DP1.4/2.1 monitor When change from DP1.4 to DP2.1 from monitor manual, modes higher than 4k120 are all cutoff by mode validation. Switch back to DP1.4 gets all the modes up to 4k240 available to be enabled by dsc passthrough. [why] Compared to DP1.4 link from hub to monitor, DP2.1 link has larger full_pbn value that causes overflow in the process of doing conversion from pbn to kbps. [how] Change the data type accordingly to fit into the data limit during conversion calculation. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> |
||
|
Kuan-Wei Chiu
|
9a6d43844d |
printk: Fix signed integer overflow when defining LOG_BUF_LEN_MAX
[ Upstream commit 3d6f83df8ff2d5de84b50377e4f0d45e25311c7a ] Shifting 1 << 31 on a 32-bit int causes signed integer overflow, which leads to undefined behavior. To prevent this, cast 1 to u32 before performing the shift, ensuring well-defined behavior. This change explicitly avoids any potential overflow by ensuring that the shift occurs on an unsigned 32-bit integer. Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com> Acked-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20240928113608.1438087-1-visitorckw@gmail.com Signed-off-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org> |
||
|
Dongwon Kim
|
b04b69819b |
drm/virtio: New fence for every plane update
[ Upstream commit d3c55b8ab6fe5fa2e7ab02efd36d09c39ee5022f ] Having a fence linked to a virtio_gpu_framebuffer in the plane update sequence would cause conflict when several planes referencing the same framebuffer (e.g. Xorg screen covering multi-displays configured for an extended mode) and those planes are updated concurrently. So it is needed to allocate a fence for every plane state instead of the framebuffer. Signed-off-by: Dongwon Kim <dongwon.kim@intel.com> [dmitry.osipenko@collabora.com: rebase, fix up, edit commit message] Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Acked-by: Vivek Kasireddy <vivek.kasireddy@intel.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241020230803.247419-2-dmitry.osipenko@collabora.com Signed-off-by: Sasha Levin <sashal@kernel.org> |
||
|
Yazen Ghannam
|
0f4fdc38f7 |
x86/amd_nb: Restrict init function to AMD-based systems
[ Upstream commit bee9e840609cc67d0a7d82f22a2130fb7a0a766d ] The code implicitly operates on AMD-based systems by matching on PCI IDs. However, the use of these IDs is going away. Add an explicit CPU vendor check instead of relying on PCI IDs. Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20241206161210.163701-3-yazen.ghannam@amd.com Signed-off-by: Sasha Levin <sashal@kernel.org> |
||
|
Carlos Llamas
|
448c419de6 |
lockdep: Fix upper limit for LOCKDEP_*_BITS configs
[ Upstream commit e638072e61726cae363d48812815197a2a0e097f ] Lockdep has a set of configs used to determine the size of the static arrays that it uses. However, the upper limit that was initially setup for these configs is too high (30 bit shift). This equates to several GiB of static memory for individual symbols. Using such high values leads to linker errors: $ make defconfig $ ./scripts/config -e PROVE_LOCKING --set-val LOCKDEP_BITS 30 $ make olddefconfig all [...] ld: kernel image bigger than KERNEL_IMAGE_SIZE ld: section .bss VMA wraps around address space Adjust the upper limits to the maximum values that avoid these issues. The need for anything more, likely points to a problem elsewhere. Note that LOCKDEP_CHAINS_BITS was intentionally left out as its upper limit had a different symptom and has already been fixed [1]. Reported-by: J. R. Okajima <hooanon05g@gmail.com> Closes: https://lore.kernel.org/all/30795.1620913191@jrobl/ [1] Cc: Peter Zijlstra <peterz@infradead.org> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Waiman Long <longman@redhat.com> Cc: Will Deacon <will@kernel.org> Acked-by: Waiman Long <longman@redhat.com> Signed-off-by: Carlos Llamas <cmllamas@google.com> Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Link: https://lore.kernel.org/r/20241024183631.643450-2-cmllamas@google.com Signed-off-by: Sasha Levin <sashal@kernel.org> |
||
|
Suleiman Souhlal
|
1ebadf0c15 |
sched: Don't try to catch up excess steal time.
[ Upstream commit 108ad0999085df2366dd9ef437573955cb3f5586 ] When steal time exceeds the measured delta when updating clock_task, we currently try to catch up the excess in future updates. However, this results in inaccurate run times for the future things using clock_task, in some situations, as they end up getting additional steal time that did not actually happen. This is because there is a window between reading the elapsed time in update_rq_clock() and sampling the steal time in update_rq_clock_task(). If the VCPU gets preempted between those two points, any additional steal time is accounted to the outgoing task even though the calculated delta did not actually contain any of that "stolen" time. When this race happens, we can end up with steal time that exceeds the calculated delta, and the previous code would try to catch up that excess steal time in future clock updates, which is given to the next, incoming task, even though it did not actually have any time stolen. This behavior is particularly bad when steal time can be very long, which we've seen when trying to extend steal time to contain the duration that the host was suspended [0]. When this happens, clock_task stays frozen, during which the running task stays running for the whole duration, since its run time doesn't increase. However the race can happen even under normal operation. Ideally we would read the elapsed cpu time and the steal time atomically, to prevent this race from happening in the first place, but doing so is non-trivial. Since the time between those two points isn't otherwise accounted anywhere, neither to the outgoing task nor the incoming task (because the "end of outgoing task" and "start of incoming task" timestamps are the same), I would argue that the right thing to do is to simply drop any excess steal time, in order to prevent these issues. [0] https://lore.kernel.org/kvm/20240820043543.837914-1-suleiman@google.com/ Signed-off-by: Suleiman Souhlal <suleiman@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20241118043745.1857272-1-suleiman@google.com Signed-off-by: Sasha Levin <sashal@kernel.org> |
||
|
Josef Bacik
|
f8b7f725ca |
btrfs: convert BUG_ON in btrfs_reloc_cow_block() to proper error handling
[ Upstream commit 6a4730b325aaa48f7a5d5ba97aff0a955e2d9cec ] This BUG_ON is meant to catch backref cache problems, but these can arise from either bugs in the backref cache or corruption in the extent tree. Fix it to be a proper error. Reviewed-by: Boris Burkov <boris@bur.io> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org> |
||
|
Hao-ran Zheng
|
db4223632a |
btrfs: fix data race when accessing the inode's disk_i_size at btrfs_drop_extents()
[ Upstream commit 5324c4e10e9c2ce307a037e904c0d9671d7137d9 ] A data race occurs when the function `insert_ordered_extent_file_extent()` and the function `btrfs_inode_safe_disk_i_size_write()` are executed concurrently. The function `insert_ordered_extent_file_extent()` is not locked when reading inode->disk_i_size, causing `btrfs_inode_safe_disk_i_size_write()` to cause data competition when writing inode->disk_i_size, thus affecting the value of `modify_tree`. The specific call stack that appears during testing is as follows: ============DATA_RACE============ btrfs_drop_extents+0x89a/0xa060 [btrfs] insert_reserved_file_extent+0xb54/0x2960 [btrfs] insert_ordered_extent_file_extent+0xff5/0x1760 [btrfs] btrfs_finish_one_ordered+0x1b85/0x36a0 [btrfs] btrfs_finish_ordered_io+0x37/0x60 [btrfs] finish_ordered_fn+0x3e/0x50 [btrfs] btrfs_work_helper+0x9c9/0x27a0 [btrfs] process_scheduled_works+0x716/0xf10 worker_thread+0xb6a/0x1190 kthread+0x292/0x330 ret_from_fork+0x4d/0x80 ret_from_fork_asm+0x1a/0x30 ============OTHER_INFO============ btrfs_inode_safe_disk_i_size_write+0x4ec/0x600 [btrfs] btrfs_finish_one_ordered+0x24c7/0x36a0 [btrfs] btrfs_finish_ordered_io+0x37/0x60 [btrfs] finish_ordered_fn+0x3e/0x50 [btrfs] btrfs_work_helper+0x9c9/0x27a0 [btrfs] process_scheduled_works+0x716/0xf10 worker_thread+0xb6a/0x1190 kthread+0x292/0x330 ret_from_fork+0x4d/0x80 ret_from_fork_asm+0x1a/0x30 ================================= The main purpose of the check of the inode's disk_i_size is to avoid taking write locks on a btree path when we have a write at or beyond EOF, since in these cases we don't expect to find extent items in the root to drop. However if we end up taking write locks due to a data race on disk_i_size, everything is still correct, we only add extra lock contention on the tree in case there's concurrency from other tasks. If the race causes us to not take write locks when we actually need them, then everything is functionally correct as well, since if we find out we have extent items to drop and we took read locks (modify_tree set to 0), we release the path and retry again with write locks. Since this data race does not affect the correctness of the function, it is a harmless data race, use data_race() to check inode->disk_i_size. Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Hao-ran Zheng <zhenghaoran154@gmail.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org> |
||
|
Kees Cook
|
b45605fac3 |
exec: fix up /proc/pid/comm in the execveat(AT_EMPTY_PATH) case
[ Upstream commit 543841d1806029889c2f69f040e88b247aba8e22 ] Zbigniew mentioned at Linux Plumber's that systemd is interested in switching to execveat() for service execution, but can't, because the contents of /proc/pid/comm are the file descriptor which was used, instead of the path to the binary[1]. This makes the output of tools like top and ps useless, especially in a world where most fds are opened CLOEXEC so the number is truly meaningless. When the filename passed in is empty (e.g. with AT_EMPTY_PATH), use the dentry's filename for "comm" instead of using the useless numeral from the synthetic fdpath construction. This way the actual exec machinery is unchanged, but cosmetically the comm looks reasonable to admins investigating things. Instead of adding TASK_COMM_LEN more bytes to bprm, use one of the unused flag bits to indicate that we need to set "comm" from the dentry. Suggested-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> Suggested-by: Tycho Andersen <tandersen@netflix.com> Suggested-by: Al Viro <viro@zeniv.linux.org.uk> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Link: https://github.com/uapi-group/kernel-features#set-comm-field-before-exec [1] Reviewed-by: Aleksa Sarai <cyphar@cyphar.com> Tested-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> Signed-off-by: Kees Cook <kees@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> |
||
|
Anshuman Khandual
|
4dcd3360bc |
arm64/mm: Ensure adequate HUGE_MAX_HSTATE
[ Upstream commit 1e5823c8e86de83a43d59a522b4de29066d3b306 ] This asserts that HUGE_MAX_HSTATE is sufficient enough preventing potential hugetlb_max_hstate runtime overflow in hugetlb_add_hstate() thus triggering a BUG_ON() there after. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: Gavin Shan <gshan@redhat.com> Link: https://lore.kernel.org/r/20241202064407.53807-1-anshuman.khandual@arm.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> |
||
|
Filipe Manana
|
6ba4663ada |
btrfs: fix use-after-free when attempting to join an aborted transaction
[ Upstream commit e2f0943cf37305dbdeaf9846e3c941451bcdef63 ]
When we are trying to join the current transaction and if it's aborted,
we read its 'aborted' field after unlocking fs_info->trans_lock and
without holding any extra reference count on it. This means that a
concurrent task that is aborting the transaction may free the transaction
before we read its 'aborted' field, leading to a use-after-free.
Fix this by reading the 'aborted' field while holding fs_info->trans_lock
since any freeing task must first acquire that lock and set
fs_info->running_transaction to NULL before freeing the transaction.
This was reported by syzbot and Dmitry with the following stack traces
from KASAN:
==================================================================
BUG: KASAN: slab-use-after-free in join_transaction+0xd9b/0xda0 fs/btrfs/transaction.c:278
Read of size 4 at addr ffff888011839024 by task kworker/u4:9/1128
CPU: 0 UID: 0 PID: 1128 Comm: kworker/u4:9 Not tainted 6.13.0-rc7-syzkaller-00019-gc45323b7560e #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
Workqueue: events_unbound btrfs_async_reclaim_data_space
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0x169/0x550 mm/kasan/report.c:489
kasan_report+0x143/0x180 mm/kasan/report.c:602
join_transaction+0xd9b/0xda0 fs/btrfs/transaction.c:278
start_transaction+0xaf8/0x1670 fs/btrfs/transaction.c:697
flush_space+0x448/0xcf0 fs/btrfs/space-info.c:803
btrfs_async_reclaim_data_space+0x159/0x510 fs/btrfs/space-info.c:1321
process_one_work kernel/workqueue.c:3236 [inline]
process_scheduled_works+0xa66/0x1840 kernel/workqueue.c:3317
worker_thread+0x870/0xd30 kernel/workqueue.c:3398
kthread+0x2f0/0x390 kernel/kthread.c:389
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
Allocated by task 5315:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3f/0x80 mm/kasan/common.c:68
poison_kmalloc_redzone mm/kasan/common.c:377 [inline]
__kasan_kmalloc+0x98/0xb0 mm/kasan/common.c:394
kasan_kmalloc include/linux/kasan.h:260 [inline]
__kmalloc_cache_noprof+0x243/0x390 mm/slub.c:4329
kmalloc_noprof include/linux/slab.h:901 [inline]
join_transaction+0x144/0xda0 fs/btrfs/transaction.c:308
start_transaction+0xaf8/0x1670 fs/btrfs/transaction.c:697
btrfs_create_common+0x1b2/0x2e0 fs/btrfs/inode.c:6572
lookup_open fs/namei.c:3649 [inline]
open_last_lookups fs/namei.c:3748 [inline]
path_openat+0x1c03/0x3590 fs/namei.c:3984
do_filp_open+0x27f/0x4e0 fs/namei.c:4014
do_sys_openat2+0x13e/0x1d0 fs/open.c:1402
do_sys_open fs/open.c:1417 [inline]
__do_sys_creat fs/open.c:1495 [inline]
__se_sys_creat fs/open.c:1489 [inline]
__x64_sys_creat+0x123/0x170 fs/open.c:1489
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 5336:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3f/0x80 mm/kasan/common.c:68
kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:582
poison_slab_object mm/kasan/common.c:247 [inline]
__kasan_slab_free+0x59/0x70 mm/kasan/common.c:264
kasan_slab_free include/linux/kasan.h:233 [inline]
slab_free_hook mm/slub.c:2353 [inline]
slab_free mm/slub.c:4613 [inline]
kfree+0x196/0x430 mm/slub.c:4761
cleanup_transaction fs/btrfs/transaction.c:2063 [inline]
btrfs_commit_transaction+0x2c97/0x3720 fs/btrfs/transaction.c:2598
insert_balance_item+0x1284/0x20b0 fs/btrfs/volumes.c:3757
btrfs_balance+0x992/0x10c0 fs/btrfs/volumes.c:4633
btrfs_ioctl_balance+0x493/0x7c0 fs/btrfs/ioctl.c:3670
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:906 [inline]
__se_sys_ioctl+0xf5/0x170 fs/ioctl.c:892
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The buggy address belongs to the object at ffff888011839000
which belongs to the cache kmalloc-2k of size 2048
The buggy address is located 36 bytes inside of
freed 2048-byte region [ffff888011839000, ffff888011839800)
The buggy address belongs to the physical page:
page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x11838
head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
flags: 0xfff00000000040(head|node=0|zone=1|lastcpupid=0x7ff)
page_type: f5(slab)
raw: 00fff00000000040 ffff88801ac42000 ffffea0000493400 dead000000000002
raw: 0000000000000000 0000000000080008 00000001f5000000 0000000000000000
head: 00fff00000000040 ffff88801ac42000 ffffea0000493400 dead000000000002
head: 0000000000000000 0000000000080008 00000001f5000000 0000000000000000
head: 00fff00000000003 ffffea0000460e01 ffffffffffffffff 0000000000000000
head: 0000000000000008 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 3, migratetype Unmovable, gfp_mask 0xd20c0(__GFP_IO|__GFP_FS|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC), pid 57, tgid 57 (kworker/0:2), ts 67248182943, free_ts 67229742023
set_page_owner include/linux/page_owner.h:32 [inline]
post_alloc_hook+0x1f3/0x230 mm/page_alloc.c:1558
prep_new_page mm/page_alloc.c:1566 [inline]
get_page_from_freelist+0x365c/0x37a0 mm/page_alloc.c:3476
__alloc_pages_noprof+0x292/0x710 mm/page_alloc.c:4753
alloc_pages_mpol_noprof+0x3e1/0x780 mm/mempolicy.c:2269
alloc_slab_page+0x6a/0x110 mm/slub.c:2423
allocate_slab+0x5a/0x2b0 mm/slub.c:2589
new_slab mm/slub.c:2642 [inline]
___slab_alloc+0xc27/0x14a0 mm/slub.c:3830
__slab_alloc+0x58/0xa0 mm/slub.c:3920
__slab_alloc_node mm/slub.c:3995 [inline]
slab_alloc_node mm/slub.c:4156 [inline]
__do_kmalloc_node mm/slub.c:4297 [inline]
__kmalloc_node_track_caller_noprof+0x2e9/0x4c0 mm/slub.c:4317
kmalloc_reserve+0x111/0x2a0 net/core/skbuff.c:609
__alloc_skb+0x1f3/0x440 net/core/skbuff.c:678
alloc_skb include/linux/skbuff.h:1323 [inline]
alloc_skb_with_frags+0xc3/0x820 net/core/skbuff.c:6612
sock_alloc_send_pskb+0x91a/0xa60 net/core/sock.c:2884
sock_alloc_send_skb include/net/sock.h:1803 [inline]
mld_newpack+0x1c3/0xaf0 net/ipv6/mcast.c:1747
add_grhead net/ipv6/mcast.c:1850 [inline]
add_grec+0x1492/0x19a0 net/ipv6/mcast.c:1988
mld_send_cr net/ipv6/mcast.c:2114 [inline]
mld_ifc_work+0x691/0xd90 net/ipv6/mcast.c:2651
page last free pid 5300 tgid 5300 stack trace:
reset_page_owner include/linux/page_owner.h:25 [inline]
free_pages_prepare mm/page_alloc.c:1127 [inline]
free_unref_page+0xd3f/0x1010 mm/page_alloc.c:2659
__slab_free+0x2c2/0x380 mm/slub.c:4524
qlink_free mm/kasan/quarantine.c:163 [inline]
qlist_free_all+0x9a/0x140 mm/kasan/quarantine.c:179
kasan_quarantine_reduce+0x14f/0x170 mm/kasan/quarantine.c:286
__kasan_slab_alloc+0x23/0x80 mm/kasan/common.c:329
kasan_slab_alloc include/linux/kasan.h:250 [inline]
slab_post_alloc_hook mm/slub.c:4119 [inline]
slab_alloc_node mm/slub.c:4168 [inline]
__do_kmalloc_node mm/slub.c:4297 [inline]
__kmalloc_noprof+0x236/0x4c0 mm/slub.c:4310
kmalloc_noprof include/linux/slab.h:905 [inline]
kzalloc_noprof include/linux/slab.h:1037 [inline]
fib_create_info+0xc14/0x25b0 net/ipv4/fib_semantics.c:1435
fib_table_insert+0x1f6/0x1f20 net/ipv4/fib_trie.c:1231
fib_magic+0x3d8/0x620 net/ipv4/fib_frontend.c:1112
fib_add_ifaddr+0x40c/0x5e0 net/ipv4/fib_frontend.c:1156
fib_netdev_event+0x375/0x490 net/ipv4/fib_frontend.c:1494
notifier_call_chain+0x1a5/0x3f0 kernel/notifier.c:85
__dev_notify_flags+0x207/0x400
dev_change_flags+0xf0/0x1a0 net/core/dev.c:9045
do_setlink+0xc90/0x4210 net/core/rtnetlink.c:3109
rtnl_changelink net/core/rtnetlink.c:3723 [inline]
__rtnl_newlink net/core/rtnetlink.c:3875 [inline]
rtnl_newlink+0x1bb6/0x2210 net/core/rtnetlink.c:4012
Memory state around the buggy address:
ffff888011838f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff888011838f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff888011839000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff888011839080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff888011839100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Reported-by: syzbot+45212e9d87a98c3f5b42@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/678e7da5.050a0220.303755.007c.GAE@google.com/
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Link: https://lore.kernel.org/linux-btrfs/CACT4Y+ZFBdo7pT8L2AzM=vegZwjp-wNkVJZQf0Ta3vZqtExaSw@mail.gmail.com/
Fixes:
|
||
|
Antonio Borneo
|
e382b6946d |
pinctrl: stm32: fix array read out of bound
commit edd48fd9d45370d6c8ba0dd834fcc51ff688cc87 upstream.
The existing code does not verify if the "tentative" index exceeds
the size of the array, causing out of bound read.
Issue identified with kasan.
Check the index before using it.
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Fixes:
|
||
|
Nathan Chancellor
|
62d33b9e68 |
s390: Add '-std=gnu11' to decompressor and purgatory CFLAGS
commit 3b8b80e993766dc96d1a1c01c62f5d15fafc79b9 upstream.
GCC changed the default C standard dialect from gnu17 to gnu23,
which should not have impacted the kernel because it explicitly requests
the gnu11 standard in the main Makefile. However, there are certain
places in the s390 code that use their own CFLAGS without a '-std='
value, which break with this dialect change because of the kernel's own
definitions of bool, false, and true conflicting with the C23 reserved
keywords.
include/linux/stddef.h:11:9: error: cannot use keyword 'false' as enumeration constant
11 | false = 0,
| ^~~~~
include/linux/stddef.h:11:9: note: 'false' is a keyword with '-std=c23' onwards
include/linux/types.h:35:33: error: 'bool' cannot be defined via 'typedef'
35 | typedef _Bool bool;
| ^~~~
include/linux/types.h:35:33: note: 'bool' is a keyword with '-std=c23' onwards
Add '-std=gnu11' to the decompressor and purgatory CFLAGS to eliminate
these errors and make the C standard version of these areas match the
rest of the kernel.
Cc: stable@vger.kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20250122-s390-fix-std-for-gcc-15-v1-1-8b00cadee083@kernel.org
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
||
|
Thomas Weißschuh
|
ce0ef98de0 |
ptp: Properly handle compat ioctls
[ Upstream commit 19ae40f572a9ce1ade9954990af709a03fd37010 ]
Pointer arguments passed to ioctls need to pass through compat_ptr() to
work correctly on s390; as explained in Documentation/driver-api/ioctl.rst.
Detect compat mode at runtime and call compat_ptr() for those commands
which do take pointer arguments.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/lkml/1ba5d3a4-7931-455b-a3ce-85a968a7cb10@app.fastmail.com/
Fixes:
|
||
|
Qu Wenruo
|
ca3aa28ea6 |
btrfs: output the reason for open_ctree() failure
commit d0f038104fa37380e2a725e669508e43d0c503e9 upstream. There is a recent ML report that mounting a large fs backed by hardware RAID56 controller (with one device missing) took too much time, and systemd seems to kill the mount attempt. In that case, the only error message is: BTRFS error (device sdj): open_ctree failed There is no reason on why the failure happened, making it very hard to understand the reason. At least output the error number (in the particular case it should be -EINTR) to provide some clue. Link: https://lore.kernel.org/linux-btrfs/9b9c4d2810abcca2f9f76e32220ed9a90febb235.camel@scientia.org/ Reported-by: Christoph Anton Mitterer <calestyo@scientia.org> Cc: stable@vger.kernel.org Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Dan Carpenter
|
fde89fe11b |
media: imx-jpeg: Fix potential error pointer dereference in detach_pm()
commit 1378ffec30367233152b7dbf4fa6a25ee98585d1 upstream.
The proble is on the first line:
if (jpeg->pd_dev[i] && !pm_runtime_suspended(jpeg->pd_dev[i]))
If jpeg->pd_dev[i] is an error pointer, then passing it to
pm_runtime_suspended() will lead to an Oops. The other conditions
check for both error pointers and NULL, but it would be more clear to
use the IS_ERR_OR_NULL() check for that.
Fixes: fd0af4cd35da ("media: imx-jpeg: Ensure power suppliers be suspended before detach them")
Cc: <stable@vger.kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
||
|
Laurentiu Palcu
|
3311c5395e |
staging: media: max96712: fix kernel oops when removing module
commit ee1b5046d5cd892a0754ab982aeaaad3702083a5 upstream.
The following kernel oops is thrown when trying to remove the max96712
module:
Unable to handle kernel paging request at virtual address 00007375746174db
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=000000010af89000
[00007375746174db] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
Modules linked in: crct10dif_ce polyval_ce mxc_jpeg_encdec flexcan
snd_soc_fsl_sai snd_soc_fsl_asoc_card snd_soc_fsl_micfil dwc_mipi_csi2
imx_csi_formatter polyval_generic v4l2_jpeg imx_pcm_dma can_dev
snd_soc_imx_audmux snd_soc_wm8962 snd_soc_imx_card snd_soc_fsl_utils
max96712(C-) rpmsg_ctrl rpmsg_char pwm_fan fuse
[last unloaded: imx8_isi]
CPU: 0 UID: 0 PID: 754 Comm: rmmod
Tainted: G C 6.12.0-rc6-06364-g327fec852c31 #17
Tainted: [C]=CRAP
Hardware name: NXP i.MX95 19X19 board (DT)
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : led_put+0x1c/0x40
lr : v4l2_subdev_put_privacy_led+0x48/0x58
sp : ffff80008699bbb0
x29: ffff80008699bbb0 x28: ffff00008ac233c0 x27: 0000000000000000
x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000
x23: ffff000080cf1170 x22: ffff00008b53bd00 x21: ffff8000822ad1c8
x20: ffff000080ff5c00 x19: ffff00008b53be40 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
x14: 0000000000000004 x13: ffff0000800f8010 x12: 0000000000000000
x11: ffff000082acf5c0 x10: ffff000082acf478 x9 : ffff0000800f8010
x8 : 0101010101010101 x7 : 7f7f7f7f7f7f7f7f x6 : fefefeff6364626d
x5 : 8080808000000000 x4 : 0000000000000020 x3 : 00000000553a3dc1
x2 : ffff00008ac233c0 x1 : ffff00008ac233c0 x0 : ff00737574617473
Call trace:
led_put+0x1c/0x40
v4l2_subdev_put_privacy_led+0x48/0x58
v4l2_async_unregister_subdev+0x2c/0x1a4
max96712_remove+0x1c/0x38 [max96712]
i2c_device_remove+0x2c/0x9c
device_remove+0x4c/0x80
device_release_driver_internal+0x1cc/0x228
driver_detach+0x4c/0x98
bus_remove_driver+0x6c/0xbc
driver_unregister+0x30/0x60
i2c_del_driver+0x54/0x64
max96712_i2c_driver_exit+0x18/0x1d0 [max96712]
__arm64_sys_delete_module+0x1a4/0x290
invoke_syscall+0x48/0x10c
el0_svc_common.constprop.0+0xc0/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x34/0xd8
el0t_64_sync_handler+0x120/0x12c
el0t_64_sync+0x190/0x194
Code: f9000bf3 aa0003f3 f9402800 f9402000 (f9403400)
---[ end trace 0000000000000000 ]---
This happens because in v4l2_i2c_subdev_init(), the i2c_set_cliendata()
is called again and the data is overwritten to point to sd, instead of
priv. So, in remove(), the wrong pointer is passed to
v4l2_async_unregister_subdev(), leading to a crash.
Fixes:
|
||
|
Thinh Nguyen
|
f0c33e7d38 |
usb: gadget: f_tcm: Don't free command immediately
commit c225d006a31949d673e646d585d9569bc28feeb9 upstream.
Don't prematurely free the command. Wait for the status completion of
the sense status. It can be freed then. Otherwise we will double-free
the command.
Fixes:
|
||
|
Laurent Pinchart
|
9232719ac9 |
media: uvcvideo: Fix double free in error path
commit c6ef3a7fa97ec823a1e1af9085cf13db9f7b3bac upstream.
If the uvc_status_init() function fails to allocate the int_urb, it will
free the dev->status pointer but doesn't reset the pointer to NULL. This
results in the kfree() call in uvc_status_cleanup() trying to
double-free the memory. Fix it by resetting the dev->status pointer to
NULL after freeing it.
Fixes:
|
||
|
Arnaud Pouliquen
|
2cf54928e7 |
remoteproc: core: Fix ida_free call while not allocated
commit 7378aeb664e5ebc396950b36a1f2dedf5aabec20 upstream.
In the rproc_alloc() function, on error, put_device(&rproc->dev) is
called, leading to the call of the rproc_type_release() function.
An error can occurs before ida_alloc is called.
In such case in rproc_type_release(), the condition (rproc->index >= 0) is
true as rproc->index has been initialized to 0.
ida_free() is called reporting a warning:
[ 4.181906] WARNING: CPU: 1 PID: 24 at lib/idr.c:525 ida_free+0x100/0x164
[ 4.186378] stm32-display-dsi 5a000000.dsi: Fixed dependency cycle(s) with /soc/dsi@5a000000/panel@0
[ 4.188854] ida_free called for id=0 which is not allocated.
[ 4.198256] mipi-dsi 5a000000.dsi.0: Fixed dependency cycle(s) with /soc/dsi@5a000000
[ 4.203556] Modules linked in: panel_orisetech_otm8009a dw_mipi_dsi_stm(+) gpu_sched dw_mipi_dsi stm32_rproc stm32_crc32 stm32_ipcc(+) optee(+)
[ 4.224307] CPU: 1 UID: 0 PID: 24 Comm: kworker/u10:0 Not tainted 6.12.0 #442
[ 4.231481] Hardware name: STM32 (Device Tree Support)
[ 4.236627] Workqueue: events_unbound deferred_probe_work_func
[ 4.242504] Call trace:
[ 4.242522] unwind_backtrace from show_stack+0x10/0x14
[ 4.250218] show_stack from dump_stack_lvl+0x50/0x64
[ 4.255274] dump_stack_lvl from __warn+0x80/0x12c
[ 4.260134] __warn from warn_slowpath_fmt+0x114/0x188
[ 4.265199] warn_slowpath_fmt from ida_free+0x100/0x164
[ 4.270565] ida_free from rproc_type_release+0x38/0x60
[ 4.275832] rproc_type_release from device_release+0x30/0xa0
[ 4.281601] device_release from kobject_put+0xc4/0x294
[ 4.286762] kobject_put from rproc_alloc.part.0+0x208/0x28c
[ 4.292430] rproc_alloc.part.0 from devm_rproc_alloc+0x80/0xc4
[ 4.298393] devm_rproc_alloc from stm32_rproc_probe+0xd0/0x844 [stm32_rproc]
[ 4.305575] stm32_rproc_probe [stm32_rproc] from platform_probe+0x5c/0xbc
Calling ida_alloc earlier in rproc_alloc ensures that the rproc->index is
properly set.
Fixes:
|
||
|
Paolo Abeni
|
73e268b4be |
mptcp: handle fastopen disconnect correctly
commit 619af16b3b57a3a4ee50b9a30add9ff155541e71 upstream.
Syzbot was able to trigger a data stream corruption:
WARNING: CPU: 0 PID: 9846 at net/mptcp/protocol.c:1024 __mptcp_clean_una+0xddb/0xff0 net/mptcp/protocol.c:1024
Modules linked in:
CPU: 0 UID: 0 PID: 9846 Comm: syz-executor351 Not tainted 6.13.0-rc2-syzkaller-00059-g00a5acdbf398 #0
Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 11/25/2024
RIP: 0010:__mptcp_clean_una+0xddb/0xff0 net/mptcp/protocol.c:1024
Code: fa ff ff 48 8b 4c 24 18 80 e1 07 fe c1 38 c1 0f 8c 8e fa ff ff 48 8b 7c 24 18 e8 e0 db 54 f6 e9 7f fa ff ff e8 e6 80 ee f5 90 <0f> 0b 90 4c 8b 6c 24 40 4d 89 f4 e9 04 f5 ff ff 44 89 f1 80 e1 07
RSP: 0018:ffffc9000c0cf400 EFLAGS: 00010293
RAX: ffffffff8bb0dd5a RBX: ffff888033f5d230 RCX: ffff888059ce8000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffffc9000c0cf518 R08: ffffffff8bb0d1dd R09: 1ffff110170c8928
R10: dffffc0000000000 R11: ffffed10170c8929 R12: 0000000000000000
R13: ffff888033f5d220 R14: dffffc0000000000 R15: ffff8880592b8000
FS: 00007f6e866496c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f6e86f491a0 CR3: 00000000310e6000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
__mptcp_clean_una_wakeup+0x7f/0x2d0 net/mptcp/protocol.c:1074
mptcp_release_cb+0x7cb/0xb30 net/mptcp/protocol.c:3493
release_sock+0x1aa/0x1f0 net/core/sock.c:3640
inet_wait_for_connect net/ipv4/af_inet.c:609 [inline]
__inet_stream_connect+0x8bd/0xf30 net/ipv4/af_inet.c:703
mptcp_sendmsg_fastopen+0x2a2/0x530 net/mptcp/protocol.c:1755
mptcp_sendmsg+0x1884/0x1b10 net/mptcp/protocol.c:1830
sock_sendmsg_nosec net/socket.c:711 [inline]
__sock_sendmsg+0x1a6/0x270 net/socket.c:726
____sys_sendmsg+0x52a/0x7e0 net/socket.c:2583
___sys_sendmsg net/socket.c:2637 [inline]
__sys_sendmsg+0x269/0x350 net/socket.c:2669
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f6e86ebfe69
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 b1 1f 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f6e86649168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f6e86f491b8 RCX: 00007f6e86ebfe69
RDX: 0000000030004001 RSI: 0000000020000080 RDI: 0000000000000003
RBP: 00007f6e86f491b0 R08: 00007f6e866496c0 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f6e86f491bc
R13: 000000000000006e R14: 00007ffe445d9420 R15: 00007ffe445d9508
</TASK>
The root cause is the bad handling of disconnect() generated internally
by the MPTCP protocol in case of connect FASTOPEN errors.
Address the issue increasing the socket disconnect counter even on such
a case, to allow other threads waiting on the same socket lock to
properly error out.
Fixes:
|
||
|
Paolo Abeni
|
3b5332d416 |
mptcp: consolidate suboption status
commit c86b000782daba926c627d2fa00c3f60a75e7472 upstream.
MPTCP maintains the received sub-options status is the bitmask carrying
the received suboptions and in several bitfields carrying per suboption
additional info.
Zeroing the bitmask before parsing is not enough to ensure a consistent
status, and the MPTCP code has to additionally clear some bitfiled
depending on the actually parsed suboption.
The above schema is fragile, and syzbot managed to trigger a path where
a relevant bitfield is not cleared/initialized:
BUG: KMSAN: uninit-value in __mptcp_expand_seq net/mptcp/options.c:1030 [inline]
BUG: KMSAN: uninit-value in mptcp_expand_seq net/mptcp/protocol.h:864 [inline]
BUG: KMSAN: uninit-value in ack_update_msk net/mptcp/options.c:1060 [inline]
BUG: KMSAN: uninit-value in mptcp_incoming_options+0x2036/0x3d30 net/mptcp/options.c:1209
__mptcp_expand_seq net/mptcp/options.c:1030 [inline]
mptcp_expand_seq net/mptcp/protocol.h:864 [inline]
ack_update_msk net/mptcp/options.c:1060 [inline]
mptcp_incoming_options+0x2036/0x3d30 net/mptcp/options.c:1209
tcp_data_queue+0xb4/0x7be0 net/ipv4/tcp_input.c:5233
tcp_rcv_established+0x1061/0x2510 net/ipv4/tcp_input.c:6264
tcp_v4_do_rcv+0x7f3/0x11a0 net/ipv4/tcp_ipv4.c:1916
tcp_v4_rcv+0x51df/0x5750 net/ipv4/tcp_ipv4.c:2351
ip_protocol_deliver_rcu+0x2a3/0x13d0 net/ipv4/ip_input.c:205
ip_local_deliver_finish+0x336/0x500 net/ipv4/ip_input.c:233
NF_HOOK include/linux/netfilter.h:314 [inline]
ip_local_deliver+0x21f/0x490 net/ipv4/ip_input.c:254
dst_input include/net/dst.h:460 [inline]
ip_rcv_finish+0x4a2/0x520 net/ipv4/ip_input.c:447
NF_HOOK include/linux/netfilter.h:314 [inline]
ip_rcv+0xcd/0x380 net/ipv4/ip_input.c:567
__netif_receive_skb_one_core net/core/dev.c:5704 [inline]
__netif_receive_skb+0x319/0xa00 net/core/dev.c:5817
process_backlog+0x4ad/0xa50 net/core/dev.c:6149
__napi_poll+0xe7/0x980 net/core/dev.c:6902
napi_poll net/core/dev.c:6971 [inline]
net_rx_action+0xa5a/0x19b0 net/core/dev.c:7093
handle_softirqs+0x1a0/0x7c0 kernel/softirq.c:561
__do_softirq+0x14/0x1a kernel/softirq.c:595
do_softirq+0x9a/0x100 kernel/softirq.c:462
__local_bh_enable_ip+0x9f/0xb0 kernel/softirq.c:389
local_bh_enable include/linux/bottom_half.h:33 [inline]
rcu_read_unlock_bh include/linux/rcupdate.h:919 [inline]
__dev_queue_xmit+0x2758/0x57d0 net/core/dev.c:4493
dev_queue_xmit include/linux/netdevice.h:3168 [inline]
neigh_hh_output include/net/neighbour.h:523 [inline]
neigh_output include/net/neighbour.h:537 [inline]
ip_finish_output2+0x187c/0x1b70 net/ipv4/ip_output.c:236
__ip_finish_output+0x287/0x810
ip_finish_output+0x4b/0x600 net/ipv4/ip_output.c:324
NF_HOOK_COND include/linux/netfilter.h:303 [inline]
ip_output+0x15f/0x3f0 net/ipv4/ip_output.c:434
dst_output include/net/dst.h:450 [inline]
ip_local_out net/ipv4/ip_output.c:130 [inline]
__ip_queue_xmit+0x1f2a/0x20d0 net/ipv4/ip_output.c:536
ip_queue_xmit+0x60/0x80 net/ipv4/ip_output.c:550
__tcp_transmit_skb+0x3cea/0x4900 net/ipv4/tcp_output.c:1468
tcp_transmit_skb net/ipv4/tcp_output.c:1486 [inline]
tcp_write_xmit+0x3b90/0x9070 net/ipv4/tcp_output.c:2829
__tcp_push_pending_frames+0xc4/0x380 net/ipv4/tcp_output.c:3012
tcp_send_fin+0x9f6/0xf50 net/ipv4/tcp_output.c:3618
__tcp_close+0x140c/0x1550 net/ipv4/tcp.c:3130
__mptcp_close_ssk+0x74e/0x16f0 net/mptcp/protocol.c:2496
mptcp_close_ssk+0x26b/0x2c0 net/mptcp/protocol.c:2550
mptcp_pm_nl_rm_addr_or_subflow+0x635/0xd10 net/mptcp/pm_netlink.c:889
mptcp_pm_nl_rm_subflow_received net/mptcp/pm_netlink.c:924 [inline]
mptcp_pm_flush_addrs_and_subflows net/mptcp/pm_netlink.c:1688 [inline]
mptcp_nl_flush_addrs_list net/mptcp/pm_netlink.c:1709 [inline]
mptcp_pm_nl_flush_addrs_doit+0xe10/0x1630 net/mptcp/pm_netlink.c:1750
genl_family_rcv_msg_doit net/netlink/genetlink.c:1115 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline]
genl_rcv_msg+0x1214/0x12c0 net/netlink/genetlink.c:1210
netlink_rcv_skb+0x375/0x650 net/netlink/af_netlink.c:2542
genl_rcv+0x40/0x60 net/netlink/genetlink.c:1219
netlink_unicast_kernel net/netlink/af_netlink.c:1321 [inline]
netlink_unicast+0xf52/0x1260 net/netlink/af_netlink.c:1347
netlink_sendmsg+0x10da/0x11e0 net/netlink/af_netlink.c:1891
sock_sendmsg_nosec net/socket.c:711 [inline]
__sock_sendmsg+0x30f/0x380 net/socket.c:726
____sys_sendmsg+0x877/0xb60 net/socket.c:2583
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2637
__sys_sendmsg net/socket.c:2669 [inline]
__do_sys_sendmsg net/socket.c:2674 [inline]
__se_sys_sendmsg net/socket.c:2672 [inline]
__x64_sys_sendmsg+0x212/0x3c0 net/socket.c:2672
x64_sys_call+0x2ed6/0x3c30 arch/x86/include/generated/asm/syscalls_64.h:47
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Uninit was stored to memory at:
mptcp_get_options+0x2c0f/0x2f20 net/mptcp/options.c:397
mptcp_incoming_options+0x19a/0x3d30 net/mptcp/options.c:1150
tcp_data_queue+0xb4/0x7be0 net/ipv4/tcp_input.c:5233
tcp_rcv_established+0x1061/0x2510 net/ipv4/tcp_input.c:6264
tcp_v4_do_rcv+0x7f3/0x11a0 net/ipv4/tcp_ipv4.c:1916
tcp_v4_rcv+0x51df/0x5750 net/ipv4/tcp_ipv4.c:2351
ip_protocol_deliver_rcu+0x2a3/0x13d0 net/ipv4/ip_input.c:205
ip_local_deliver_finish+0x336/0x500 net/ipv4/ip_input.c:233
NF_HOOK include/linux/netfilter.h:314 [inline]
ip_local_deliver+0x21f/0x490 net/ipv4/ip_input.c:254
dst_input include/net/dst.h:460 [inline]
ip_rcv_finish+0x4a2/0x520 net/ipv4/ip_input.c:447
NF_HOOK include/linux/netfilter.h:314 [inline]
ip_rcv+0xcd/0x380 net/ipv4/ip_input.c:567
__netif_receive_skb_one_core net/core/dev.c:5704 [inline]
__netif_receive_skb+0x319/0xa00 net/core/dev.c:5817
process_backlog+0x4ad/0xa50 net/core/dev.c:6149
__napi_poll+0xe7/0x980 net/core/dev.c:6902
napi_poll net/core/dev.c:6971 [inline]
net_rx_action+0xa5a/0x19b0 net/core/dev.c:7093
handle_softirqs+0x1a0/0x7c0 kernel/softirq.c:561
__do_softirq+0x14/0x1a kernel/softirq.c:595
Uninit was stored to memory at:
put_unaligned_be32 include/linux/unaligned.h:68 [inline]
mptcp_write_options+0x17f9/0x3100 net/mptcp/options.c:1417
mptcp_options_write net/ipv4/tcp_output.c:465 [inline]
tcp_options_write+0x6d9/0xe90 net/ipv4/tcp_output.c:759
__tcp_transmit_skb+0x294b/0x4900 net/ipv4/tcp_output.c:1414
tcp_transmit_skb net/ipv4/tcp_output.c:1486 [inline]
tcp_write_xmit+0x3b90/0x9070 net/ipv4/tcp_output.c:2829
__tcp_push_pending_frames+0xc4/0x380 net/ipv4/tcp_output.c:3012
tcp_send_fin+0x9f6/0xf50 net/ipv4/tcp_output.c:3618
__tcp_close+0x140c/0x1550 net/ipv4/tcp.c:3130
__mptcp_close_ssk+0x74e/0x16f0 net/mptcp/protocol.c:2496
mptcp_close_ssk+0x26b/0x2c0 net/mptcp/protocol.c:2550
mptcp_pm_nl_rm_addr_or_subflow+0x635/0xd10 net/mptcp/pm_netlink.c:889
mptcp_pm_nl_rm_subflow_received net/mptcp/pm_netlink.c:924 [inline]
mptcp_pm_flush_addrs_and_subflows net/mptcp/pm_netlink.c:1688 [inline]
mptcp_nl_flush_addrs_list net/mptcp/pm_netlink.c:1709 [inline]
mptcp_pm_nl_flush_addrs_doit+0xe10/0x1630 net/mptcp/pm_netlink.c:1750
genl_family_rcv_msg_doit net/netlink/genetlink.c:1115 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline]
genl_rcv_msg+0x1214/0x12c0 net/netlink/genetlink.c:1210
netlink_rcv_skb+0x375/0x650 net/netlink/af_netlink.c:2542
genl_rcv+0x40/0x60 net/netlink/genetlink.c:1219
netlink_unicast_kernel net/netlink/af_netlink.c:1321 [inline]
netlink_unicast+0xf52/0x1260 net/netlink/af_netlink.c:1347
netlink_sendmsg+0x10da/0x11e0 net/netlink/af_netlink.c:1891
sock_sendmsg_nosec net/socket.c:711 [inline]
__sock_sendmsg+0x30f/0x380 net/socket.c:726
____sys_sendmsg+0x877/0xb60 net/socket.c:2583
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2637
__sys_sendmsg net/socket.c:2669 [inline]
__do_sys_sendmsg net/socket.c:2674 [inline]
__se_sys_sendmsg net/socket.c:2672 [inline]
__x64_sys_sendmsg+0x212/0x3c0 net/socket.c:2672
x64_sys_call+0x2ed6/0x3c30 arch/x86/include/generated/asm/syscalls_64.h:47
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Uninit was stored to memory at:
mptcp_pm_add_addr_signal+0x3d7/0x4c0
mptcp_established_options_add_addr net/mptcp/options.c:666 [inline]
mptcp_established_options+0x1b9b/0x3a00 net/mptcp/options.c:884
tcp_established_options+0x2c4/0x7d0 net/ipv4/tcp_output.c:1012
__tcp_transmit_skb+0x5b7/0x4900 net/ipv4/tcp_output.c:1333
tcp_transmit_skb net/ipv4/tcp_output.c:1486 [inline]
tcp_write_xmit+0x3b90/0x9070 net/ipv4/tcp_output.c:2829
__tcp_push_pending_frames+0xc4/0x380 net/ipv4/tcp_output.c:3012
tcp_send_fin+0x9f6/0xf50 net/ipv4/tcp_output.c:3618
__tcp_close+0x140c/0x1550 net/ipv4/tcp.c:3130
__mptcp_close_ssk+0x74e/0x16f0 net/mptcp/protocol.c:2496
mptcp_close_ssk+0x26b/0x2c0 net/mptcp/protocol.c:2550
mptcp_pm_nl_rm_addr_or_subflow+0x635/0xd10 net/mptcp/pm_netlink.c:889
mptcp_pm_nl_rm_subflow_received net/mptcp/pm_netlink.c:924 [inline]
mptcp_pm_flush_addrs_and_subflows net/mptcp/pm_netlink.c:1688 [inline]
mptcp_nl_flush_addrs_list net/mptcp/pm_netlink.c:1709 [inline]
mptcp_pm_nl_flush_addrs_doit+0xe10/0x1630 net/mptcp/pm_netlink.c:1750
genl_family_rcv_msg_doit net/netlink/genetlink.c:1115 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline]
genl_rcv_msg+0x1214/0x12c0 net/netlink/genetlink.c:1210
netlink_rcv_skb+0x375/0x650 net/netlink/af_netlink.c:2542
genl_rcv+0x40/0x60 net/netlink/genetlink.c:1219
netlink_unicast_kernel net/netlink/af_netlink.c:1321 [inline]
netlink_unicast+0xf52/0x1260 net/netlink/af_netlink.c:1347
netlink_sendmsg+0x10da/0x11e0 net/netlink/af_netlink.c:1891
sock_sendmsg_nosec net/socket.c:711 [inline]
__sock_sendmsg+0x30f/0x380 net/socket.c:726
____sys_sendmsg+0x877/0xb60 net/socket.c:2583
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2637
__sys_sendmsg net/socket.c:2669 [inline]
__do_sys_sendmsg net/socket.c:2674 [inline]
__se_sys_sendmsg net/socket.c:2672 [inline]
__x64_sys_sendmsg+0x212/0x3c0 net/socket.c:2672
x64_sys_call+0x2ed6/0x3c30 arch/x86/include/generated/asm/syscalls_64.h:47
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Uninit was stored to memory at:
mptcp_pm_add_addr_received+0x95f/0xdd0 net/mptcp/pm.c:235
mptcp_incoming_options+0x2983/0x3d30 net/mptcp/options.c:1169
tcp_data_queue+0xb4/0x7be0 net/ipv4/tcp_input.c:5233
tcp_rcv_state_process+0x2a38/0x49d0 net/ipv4/tcp_input.c:6972
tcp_v4_do_rcv+0xbf9/0x11a0 net/ipv4/tcp_ipv4.c:1939
tcp_v4_rcv+0x51df/0x5750 net/ipv4/tcp_ipv4.c:2351
ip_protocol_deliver_rcu+0x2a3/0x13d0 net/ipv4/ip_input.c:205
ip_local_deliver_finish+0x336/0x500 net/ipv4/ip_input.c:233
NF_HOOK include/linux/netfilter.h:314 [inline]
ip_local_deliver+0x21f/0x490 net/ipv4/ip_input.c:254
dst_input include/net/dst.h:460 [inline]
ip_rcv_finish+0x4a2/0x520 net/ipv4/ip_input.c:447
NF_HOOK include/linux/netfilter.h:314 [inline]
ip_rcv+0xcd/0x380 net/ipv4/ip_input.c:567
__netif_receive_skb_one_core net/core/dev.c:5704 [inline]
__netif_receive_skb+0x319/0xa00 net/core/dev.c:5817
process_backlog+0x4ad/0xa50 net/core/dev.c:6149
__napi_poll+0xe7/0x980 net/core/dev.c:6902
napi_poll net/core/dev.c:6971 [inline]
net_rx_action+0xa5a/0x19b0 net/core/dev.c:7093
handle_softirqs+0x1a0/0x7c0 kernel/softirq.c:561
__do_softirq+0x14/0x1a kernel/softirq.c:595
Local variable mp_opt created at:
mptcp_incoming_options+0x119/0x3d30 net/mptcp/options.c:1127
tcp_data_queue+0xb4/0x7be0 net/ipv4/tcp_input.c:5233
The current schema is too fragile; address the issue grouping all the
state-related data together and clearing the whole group instead of
just the bitmask. This also cleans-up the code a bit, as there is no
need to individually clear "random" bitfield in a couple of places
any more.
Fixes:
|
||
|
Kyle Tso
|
4953207927 |
usb: typec: tcpci: Prevent Sink disconnection before vPpsShutdown in SPR PPS
commit 4d27afbf256028a1f54363367f30efc8854433c3 upstream.
The Source can drop its output voltage to the minimum of the requested
PPS APDO voltage range when it is in Current Limit Mode. If this voltage
falls within the range of vPpsShutdown, the Source initiates a Hard
Reset and discharges Vbus. However, currently the Sink may disconnect
before the voltage reaches vPpsShutdown, leading to unexpected behavior.
Prevent premature disconnection by setting the Sink's disconnect
threshold to the minimum vPpsShutdown value. Additionally, consider the
voltage drop due to IR drop when calculating the appropriate threshold.
This ensures a robust and reliable interaction between the Source and
Sink during SPR PPS Current Limit Mode operation.
Fixes:
|
||
|
Jos Wang
|
17d426628c |
usb: typec: tcpm: set SRC_SEND_CAPABILITIES timeout to PD_T_SENDER_RESPONSE
commit 2eb3da037c2c20fa30bc502bc092479b2a1aaae2 upstream.
As PD2.0 spec ("8.3.3.2.3 PE_SRC_Send_Capabilities state"), after the
Source receives the GoodCRC Message from the Sink in response to the
Source_Capabilities message, it should start the SenderResponseTimer,
after the timer times out, the state machine transitions to the
HARD_RESET state.
Fixes:
|
||
|
Kyle Tso
|
64925ab46c |
usb: dwc3: core: Defer the probe until USB power supply ready
commit 66e0ea341a2a78d14336117f19763bd9be26d45d upstream.
Currently, DWC3 driver attempts to acquire the USB power supply only
once during the probe. If the USB power supply is not ready at that
time, the driver simply ignores the failure and continues the probe,
leading to permanent non-functioning of the gadget vbus_draw callback.
Address this problem by delaying the dwc3 driver initialization until
the USB power supply is registered.
Fixes:
|
||
|
Joe Hattori
|
32814861f1 |
usb: dwc3-am62: Fix an OF node leak in phy_syscon_pll_refclk()
commit a266462b937beba065e934a563efe13dd246a164 upstream.
phy_syscon_pll_refclk() leaks an OF node obtained by
of_parse_phandle_with_fixed_args(), thus add an of_node_put() call.
Cc: stable <stable@kernel.org>
Fixes:
|
||
|
Thinh Nguyen
|
2c3e83538f |
usb: gadget: f_tcm: Fix Get/SetInterface return value
commit 3b997089903b909684114aca6f79d683e5c64a0e upstream.
Check to make sure that the GetInterface and SetInterface are for valid
interface. Return proper alternate setting number on GetInterface.
Fixes:
|
||
|
Sean Rhodes
|
93a56dbe12 |
drivers/card_reader/rtsx_usb: Restore interrupt based detection
commit 235b630eda072d7e7b102ab346d6b8a2c028a772 upstream. This commit reintroduces interrupt-based card detection previously used in the rts5139 driver. This functionality was removed in commit |
||
|
Michal Pecio
|
4ff18870af |
usb: xhci: Fix NULL pointer dereference on certain command aborts
commit 1e0a19912adb68a4b2b74fd77001c96cd83eb073 upstream.
If a command is queued to the final usable TRB of a ring segment, the
enqueue pointer is advanced to the subsequent link TRB and no further.
If the command is later aborted, when the abort completion is handled
the dequeue pointer is advanced to the first TRB of the next segment.
If no further commands are queued, xhci_handle_stopped_cmd_ring() sees
the ring pointers unequal and assumes that there is a pending command,
so it calls xhci_mod_cmd_timer() which crashes if cur_cmd was NULL.
Don't attempt timer setup if cur_cmd is NULL. The subsequent doorbell
ring likely is unnecessary too, but it's harmless. Leave it alone.
This is probably Bug 219532, but no confirmation has been received.
The issue has been independently reproduced and confirmed fixed using
a USB MCU programmed to NAK the Status stage of SET_ADDRESS forever.
Everything continued working normally after several prevented crashes.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219532
Fixes:
|
||
|
Nikita Zhandarovich
|
e10b392a74 |
net: usb: rtl8150: enable basic endpoint checking
commit 90b7f2961798793275b4844348619b622f983907 upstream.
Syzkaller reports [1] encountering a common issue of utilizing a wrong
usb endpoint type during URB submitting stage. This, in turn, triggers
a warning shown below.
For now, enable simple endpoint checking (specifically, bulk and
interrupt eps, testing control one is not essential) to mitigate
the issue with a view to do other related cosmetic changes later,
if they are necessary.
[1] Syzkaller report:
usb 1-1: BOGUS urb xfer, pipe 3 != type 1
WARNING: CPU: 1 PID: 2586 at drivers/usb/core/urb.c:503 usb_submit_urb+0xe4b/0x1730 driv>
Modules linked in:
CPU: 1 UID: 0 PID: 2586 Comm: dhcpcd Not tainted 6.11.0-rc4-syzkaller-00069-gfc88bb11617>
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024
RIP: 0010:usb_submit_urb+0xe4b/0x1730 drivers/usb/core/urb.c:503
Code: 84 3c 02 00 00 e8 05 e4 fc fc 4c 89 ef e8 fd 25 d7 fe 45 89 e0 89 e9 4c 89 f2 48 8>
RSP: 0018:ffffc9000441f740 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff888112487a00 RCX: ffffffff811a99a9
RDX: ffff88810df6ba80 RSI: ffffffff811a99b6 RDI: 0000000000000001
RBP: 0000000000000003 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000001
R13: ffff8881023bf0a8 R14: ffff888112452a20 R15: ffff888112487a7c
FS: 00007fc04eea5740(0000) GS:ffff8881f6300000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f0a1de9f870 CR3: 000000010dbd0000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
rtl8150_open+0x300/0xe30 drivers/net/usb/rtl8150.c:733
__dev_open+0x2d4/0x4e0 net/core/dev.c:1474
__dev_change_flags+0x561/0x720 net/core/dev.c:8838
dev_change_flags+0x8f/0x160 net/core/dev.c:8910
devinet_ioctl+0x127a/0x1f10 net/ipv4/devinet.c:1177
inet_ioctl+0x3aa/0x3f0 net/ipv4/af_inet.c:1003
sock_do_ioctl+0x116/0x280 net/socket.c:1222
sock_ioctl+0x22e/0x6c0 net/socket.c:1341
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl fs/ioctl.c:893 [inline]
__x64_sys_ioctl+0x193/0x220 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fc04ef73d49
...
This change has not been tested on real hardware.
Reported-and-tested-by: syzbot+d7e968426f644b567e31@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=d7e968426f644b567e31
Fixes:
|
||
|
Lianqin Hu
|
485997cc74 |
ALSA: usb-audio: Add delay quirk for iBasso DC07 Pro
commit d85fc52cbb9a719c8335d93a28d6a79d7acd419f upstream. Audio control requests that sets sampling frequency sometimes fail on this card. Adding delay between control messages eliminates that problem. usb 1-1: New USB device found, idVendor=2fc6, idProduct=f0b7 usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-1: Product: iBasso DC07 Pro usb 1-1: Manufacturer: iBasso usb 1-1: SerialNumber: CTUA171130B Signed-off-by: Lianqin Hu <hulianqin@vivo.com> Cc: <stable@vger.kernel.org> Link: https://patch.msgid.link/TYUPR06MB62174A48D04E09A37996DF84D2ED2@TYUPR06MB6217.apcprd06.prod.outlook.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Ricardo B. Marliere
|
2d0ce53755 |
ktest.pl: Check kernelrelease return in get_version
commit a4e17a8f239a545c463f8ec27db4ed6e74b31841 upstream.
In the case of a test that uses the special option ${KERNEL_VERSION} in one
of its settings but has no configuration available in ${OUTPUT_DIR}, for
example if it's a new empty directory, then the `make kernelrelease` call
will fail and the subroutine will chomp an empty string, silently. Fix that
by adding an empty configuration and retrying.
Cc: stable@vger.kernel.org
Cc: John Hawley <warthog9@eaglescrag.net>
Fixes:
|