[ Upstream commit 009f6f42c67e9de737d6d3d199f92b21a8cb9622 ]
The kvmppc_get_one_reg_hv() for SDAR is wrongly getting the SIAR
instead of SDAR, possibly a paste error emanating from the previous
refactoring.
Patch fixes the wrong get_one_reg() for the same.
Fixes: ebc88ea7a6ad ("KVM: PPC: Book3S HV: Use accessors for VCPU registers")
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/171759278410.1480.16404209606556979576.stgit@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 63aec3e4d987fd43237f557460345bca3b51e530 ]
Camera titan top GDSC is a parent supply to all other camera GDSCs. Titan
top GDSC is required to be enabled before enabling any other camera GDSCs
and it should be disabled only after all other camera GDSCs are disabled.
Ensure this behavior by marking titan top GDSC as parent of all other
camera GDSCs.
Fixes: 1daec8cfeb ("clk: qcom: camcc: Add camera clock controller driver for SC7280")
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240531095142.9688-4-quic_tdas@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f38467b5a920be1473710428a93c4e54b6f8a0c1 ]
Update the force mem core bit for UFS ICE clock to force the core on signal
to remain active during halt state of the clk. When retention bit of the
clock is set the memories of the subsystem will retain the logic across
power states.
Fixes: a3cc092196 ("clk: qcom: Add Global Clock controller (GCC) driver for SC7280")
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240531095142.9688-3-quic_tdas@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c93637e6a4c4e1d0e85ef7efac78d066bbb24d96 ]
Avoid large backtrace, it is sufficient to warn the user that there has
been a link problem. Either the link has failed and the system is in need
of maintenance, or the link continues to work and user has been informed.
The message from the warning can be looked up in the sources.
This makes an actual link issue less verbose.
First of all, this controller has a limitation in that the controller
driver has to assist the hardware with transition to L1 link state by
writing L1IATN to PMCTRL register, the L1 and L0 link state switching
is not fully automatic on this controller.
In case of an ASMedia ASM1062 PCIe SATA controller which does not support
ASPM, on entry to suspend or during platform pm_test, the SATA controller
enters D3hot state and the link enters L1 state. If the SATA controller
wakes up before rcar_pcie_wakeup() was called and returns to D0, the link
returns to L0 before the controller driver even started its transition to
L1 link state. At this point, the SATA controller did send an PM_ENTER_L1
DLLP to the PCIe controller and the PCIe controller received it, and the
PCIe controller did set PMSR PMEL1RX bit.
Once rcar_pcie_wakeup() is called, if the link is already back in L0 state
and PMEL1RX bit is set, the controller driver has no way to determine if
it should perform the link transition to L1 state, or treat the link as if
it is in L0 state. Currently the driver attempts to perform the transition
to L1 link state unconditionally, which in this specific case fails with a
PMSR L1FAEG poll timeout, however the link still works as it is already
back in L0 state.
Reduce this warning verbosity. In case the link is really broken, the
rcar_pcie_config_access() would fail, otherwise it will succeed and any
system with this controller and ASM1062 can suspend without generating
a backtrace.
Fixes: 84b5761462 ("PCI: rcar: Finish transition to L1 state in rcar_pcie_config_access()")
Link: https://lore.kernel.org/linux-pci/20240511235513.77301-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ffa0e70b2daf9b0271e4960b7c8a2350e2cda08 ]
After 6ab15b5e70 ("PCI: dwc: keystone: Convert .scan_bus() callback to
use add_bus"), ks_pcie_v3_65_add_bus() enabled BAR 0 for both v3.65a and
v4.90a devices. On the AM654x SoC, which uses v4.90a, enabling BAR 0
causes Completion Timeouts when setting up MSI-X. These timeouts delay
boot of the AM654x by about 45 seconds.
Move the BAR 0 initialization to ks_pcie_msi_host_init(), which is only
used for v3.65a devices, and remove ks_pcie_v3_65_add_bus().
[bhelgaas: commit log]
Fixes: 6ab15b5e70 ("PCI: dwc: keystone: Convert .scan_bus() callback to use add_bus")
Link: https://lore.kernel.org/linux-pci/20240328085041.2916899-3-s-vadapalli@ti.com
Suggested-by: Bjorn Helgaas <helgaas@kernel.org>
Suggested-by: Niklas Cassel <cassel@kernel.org>
Suggested-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 903534fa7d30214d8ba840ab1cd9e917e0c88e41 ]
pbus_size_mem() keeps the size of the optional resources in
children_add_size. When calculating the PCI bridge window size,
calculate_memsize() lower bounds size by old_size before adding
children_add_size and performing the window size alignment. This
results in double counting for the resources in children_add_size
because old_size may be based on the previous size of the bridge
window after it has already included children_add_size (that is,
size1 in pbus_size_mem() from an earlier invocation of that
function).
As a result, on repeated remove of the bus & rescan cycles the resource
size keeps increasing when children_add_size is non-zero as can be seen
from this extract:
iomem0: 23fffd00000-23fffdfffff : PCI Bus 0000:03 # 1MiB
iomem1: 20000000000-200001fffff : PCI Bus 0000:03 # 2MiB
iomem2: 20000000000-200002fffff : PCI Bus 0000:03 # 3MiB
iomem3: 20000000000-200003fffff : PCI Bus 0000:03 # 4MiB
iomem4: 20000000000-200004fffff : PCI Bus 0000:03 # 5MiB
Solve the double counting by moving old_size check later in
calculate_memsize() so that children_add_size is already accounted for.
After the patch, the bridge window retains its size as expected:
iomem0: 23fffd00000-23fffdfffff : PCI Bus 0000:03 # 1MiB
iomem1: 20000000000-200000fffff : PCI Bus 0000:03 # 1MiB
iomem2: 20000000000-200000fffff : PCI Bus 0000:03 # 1MiB
Fixes: a4ac9fea01 ("PCI : Calculate right add_size")
Link: https://lore.kernel.org/r/20240507102523.57320-2-ilpo.jarvinen@linux.intel.com
Tested-by: Lidong Wang <lidong.wang@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5acc3f971a01be48d5ff4252d8f9cdb87998cdfb ]
The sorting in iio_gts_build_avail_time_table is not working as intended.
It could result in an out-of-bounds access when the time is zero.
Here are more details:
1. When the gts->itime_table[i].time_us is zero, e.g., the time
sequence is `3, 0, 1`, the inner for-loop will not terminate and do
out-of-bound writes. This is because once `times[j] > new`, the value
`new` will be added in the current position and the `times[j]` will be
moved to `j+1` position, which makes the if-condition always hold.
Meanwhile, idx will be added one, making the loop keep running without
termination and out-of-bound write.
2. If none of the gts->itime_table[i].time_us is zero, the elements
will just be copied without being sorted as described in the comment
"Sort times from all tables to one and remove duplicates".
For more details, please refer to
https://lore.kernel.org/all/6dd0d822-046c-4dd2-9532-79d7ab96ec05@gmail.com.
Reported-by: Chenyuan Yang <chenyuan0y@gmail.com>
Suggested-by: Matti Vaittinen <mazziesaccount@gmail.com>
Fixes: 38416c28e1 ("iio: light: Add gain-time-scale helpers")
Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com>
Co-developed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/d501ade8c1f7b202d34c6404eda423489cab1df5.1714480171.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a6c3ea1ec96307dbfbb2f16d96c674c5cc80f445 ]
Remove the unused cif_stack argument and add a protype in oplib_64.h
Commit ef3e035c3a ("sparc64: Fix register corruption in top-most
kernel stack frame during boot.") removed the cif_stack argument to
prom_cif init in the declaration at the caller site and the usage of it
within prom_cif_init, but not in the function signature of the function
itself.
This also fixes the following warning:
arch/sparc/prom/p1275.c:52:6: warning: no previous prototype for ‘prom_cif_init’
Fixes: ef3e035c3a ("sparc64: Fix register corruption in top-most kernel stack frame during boot.")
Link: https://lore.kernel.org/r/20240710094155.458731-3-andreas@gaisler.com
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 87e552ad654554be73e62dd43c923bcee215287d ]
This code was passing the incorrect pointer to PTR_ERR_OR_ZERO() so it
always returned success. It should have been checking the array element
instead of the array itself.
Fixes: 96a2e242a5 ("leds: flash: Add driver to support flash LED module in QCOM PMICs")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/ZoWJS_epjIMCYITg@stanley.mountain
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 65121eff3e4c8c90f8126debf3c369228691c591 ]
If the extended attribute size is not a multiple of block size, the last
block in the EA inode will have uninitialized tail which will get
written to disk. We will never expose the data to userspace but still
this is not a good practice so just zero out the tail of the block as it
isn't going to cause a noticeable performance overhead.
Fixes: e50e5129f3 ("ext4: xattr-in-inode support")
Reported-by: syzbot+9c1fe13fcb51574b249b@syzkaller.appspotmail.com
Reported-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240613150234.25176-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7882b0187bbeb647967a7b5998ce4ad26ef68a9a ]
When fast-commit needs to track ranges, it has to handle inodes that have
inlined data in a different way because ext4_fc_write_inode_data(), in the
actual commit path, will attempt to map the required blocks for the range.
However, inodes that have inlined data will have it's data stored in
inode->i_block and, eventually, in the extended attribute space.
Unfortunately, because fast commit doesn't currently support extended
attributes, the solution is to mark this commit as ineligible.
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1039883
Signed-off-by: Luis Henriques (SUSE) <luis.henriques@linux.dev>
Tested-by: Ben Hutchings <benh@debian.org>
Fixes: 9725958bb7 ("ext4: fast commit may miss tracking unwritten range during ftruncate")
Link: https://patch.msgid.link/20240618144312.17786-1-luis.henriques@linux.dev
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4840c00003a2275668a13b82c9f5b1aed80183aa ]
Previously in order to mark the communication with the DS server,
we tried to use NFS_CS_DS in cl_flags. However, this flag would
only be saved for the DS server and in case where DS equals MDS,
the client would not find a matching nfs_client in nfs_match_client
that represents the MDS (but is also a DS).
Instead, don't rely on the NFS_CS_DS but instead use NFS_CS_PNFS.
Fixes: 379e4adfdd ("NFSv4.1: fixup use EXCHGID4_FLAG_USE_PNFS_DS for DS server")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6258cf25d5e3155c3219ab5a79b970eef7996356 ]
Prior to the commit identified below, call_transmit_status() would
handle -EPERM and other errors related to an unreachable server by
falling through to call_status() which added a 3-second delay and
handled the failure as a timeout.
Since that commit, call_transmit_status() falls through to
handle_bind(). For UDP this moves straight on to handle_connect() and
handle_transmit() so we immediately retransmit - and likely get the same
error.
This results in an indefinite loop in __rpc_execute() which triggers a
soft-lockup warning.
For the errors that indicate an unreachable server,
call_transmit_status() should fall back to call_status() as it did
before. This cannot cause the thundering herd that the previous patch
was avoiding, as the call_status() will insert a delay.
Fixes: ed7dc973bd ("SUNRPC: Prevent thundering herd when the socket is not connected")
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit acd9f2dd23c632568156217aac7a05f5a0313152 ]
Avoid FastReg operations getting MW_BIND_ERR after a reconnect.
rpcrdma_reqs_reset() is called on transport tear-down to get each
rpcrdma_req back into a clean state.
MRs on req->rl_registered are waiting for a FastReg, are already
registered, or are waiting for invalidation. If the transport is
being torn down when reqs_reset() is called, the matching LocalInv
might never be posted. That leaves these MR registered /and/ on
req->rl_free_mrs, where they can be re-used for the next
connection.
Since xprtrdma does not keep specific track of the MR state, it's
not possible to know what state these MRs are in, so the only safe
thing to do is release them immediately.
Fixes: 5de55ce951 ("xprtrdma: Release in-flight MRs on disconnect")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 40176714c818b0b6a2ca8213cdb7654fbd49b742 ]
Commit 16c2004d9e ("mfd: omap-usb-tll: Allocate driver data at once")
changed the memory allocation of 'tll' to consolidate it into a single
allocation, introducing an incorrect size calculation.
In particular, the allocation for the array of pointers was converted
into a single-pointer allocation.
The memory allocation used to occur in two steps:
tll = devm_kzalloc(dev, sizeof(struct usbtll_omap), GFP_KERNEL);
tll->ch_clk = devm_kzalloc(dev, sizeof(struct clk *) * tll->nch,
GFP_KERNEL);
And it turned that into the following allocation:
tll = devm_kzalloc(dev, sizeof(*tll) + sizeof(tll->ch_clk[nch]),
GFP_KERNEL);
sizeof(tll->ch_clk[nch]) returns the size of a single pointer instead of
the expected nch pointers.
This bug went unnoticed because the allocation size was small enough to
fit within the minimum size of a memory allocation for this particular
case [1].
The complete allocation can still be done at once with the struct_size
macro, which comes in handy for structures with a trailing flexible
array.
Fix the memory allocation to obtain the original size again.
Link: https://lore.kernel.org/all/202406261121.2FFD65647@keescook/ [1]
Fixes: 16c2004d9e ("mfd: omap-usb-tll: Allocate driver data at once")
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Fixes: commit 16c2004d9e ("mfd: omap-usb-tll: Allocate driver data at once")
Link: https://lore.kernel.org/r/20240626-omap-usb-tll-counted_by-v2-1-4bedf20d1b51@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c879a8c39dd55e7fabdd8d13341f7bc5200db377 ]
Linking a file into two modules can have unintended side-effects
and produces a W=1 warning:
scripts/Makefile.build:236: drivers/mfd/Makefile: rsmu_core.o is added to multiple modules: rsmu-i2c rsmu-spi
Make this one a separate module instead.
Fixes: a1867f85e0 ("mfd: Add Renesas Synchronization Management Unit (SMU) support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240529094856.1869543-1-arnd@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b40934ae32232140e85dc7dc1c3ea0e296986723 ]
In the past, the exclude_guest setting has had no effect on Intel PT
tracing, but that may not be the case in the future.
Set the flag correctly based upon whether KVM is using Intel PT
"Host/Guest" mode, which is determined by the kvm_intel module
parameter pt_mode:
pt_mode=0 System-wide mode : host and guest output to host buffer
pt_mode=1 Host/Guest mode : host/guest output to host/guest
buffers respectively
Fixes: 6e86bfdc4a ("perf intel-pt: Support decoding of guest kernel")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240625104532.11990-3-adrian.hunter@intel.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e750a4b1224142bd8dd057b0d5adf8a5608b7e77 ]
For scenarios, when source change is followed by VIDIOC_STREAMOFF
on output plane, driver should discard any queued OUTPUT
buffers, which are not decoded or dequeued.
Flush with HFI_FLUSH_INPUT does not have any actual impact.
So, fix it, by invoking HFI_FLUSH_ALL, which will flush all
queued buffers.
Fixes: 85872f861d ("media: venus: Mark last capture buffer")
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Tested-by: Nathan Hebert <nhebert@chromium.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 907c3fe532253a6ef4eb9c4d67efb71fab58c706 ]
When doing fast_commit replay an infinite loop may occur due to an
uninitialized extent_status struct. ext4_ext_determine_insert_hole() does
not detect the replay and calls ext4_es_find_extent_range(), which will
return immediately without initializing the 'es' variable.
Because 'es' contains garbage, an integer overflow may happen causing an
infinite loop in this function, easily reproducible using fstest generic/039.
This commit fixes this issue by unconditionally initializing the structure
in function ext4_es_find_extent_range().
Thanks to Zhang Yi, for figuring out the real problem!
Fixes: 8016e29f43 ("ext4: fast commit recovery path")
Signed-off-by: Luis Henriques (SUSE) <luis.henriques@linux.dev>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20240515082857.32730-1-luis.henriques@linux.dev
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 940b27161afc6ec53fc66245a4fb3518394cdc92 ]
This reverts commit da1afe8e60.
Commit 699a8c7c4b ("leds: Add of_led_get() and led_put()"), introduced in
5.5, added of_led_get() and led_put() but missed a put_device() in
led_put(), thus creating a leak in case the consumer device is removed.
Arguably device removal was not very popular, so this went apparently
unnoticed until 2022. In January 2023 two different patches got merged to
fix the same bug:
- commit da1afe8e60 ("leds: led-core: Fix refcount leak in of_led_get()")
- commit 445110941e ("leds: led-class: Add missing put_device() to led_put()")
They fix the bug in two different ways, which creates no patch conflicts,
and both were merged in v6.2. The result is that now there is one more
put_device() than get_device()s, instead of one less.
Arguably device removal is not very popular yet, so this apparently hasn't
been noticed as well up to now. But it blew up here while I'm working with
device tree overlay insertion and removal. The symptom is an apparently
unrelated list of oopses on device removal, with reasons:
kernfs: can not remove 'uevent', no directory
kernfs: can not remove 'brightness', no directory
kernfs: can not remove 'max_brightness', no directory
...
Here sysfs fails removing attribute files, which is because the device name
changed and so the sysfs path. This is because the device name string got
corrupted, which is because it got freed too early and its memory reused.
Different symptoms could appear in different use cases.
Fix by removing one of the two fixes.
The choice was to remove commit da1afe8e60 because:
* it is calling put_device() inside of_led_get() just after getting the
device, thus it is basically not refcounting the LED device at all
during its entire lifetime
* it does not add a corresponding put_device() in led_get(), so it fixes
only the OF case
The other fix (445110941e) is adding the put_device() in led_put() so it
covers the entire lifetime, and it works even in the non-DT case.
Fixes: da1afe8e60 ("leds: led-core: Fix refcount leak in of_led_get()")
Co-developed-by: Hervé Codina <herve.codina@bootlin.com>
Signed-off-by: Hervé Codina <herve.codina@bootlin.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/20240625-led-class-device-leak-v2-1-75fdccf47421@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 58979ad6330a70450ed78837be3095107d022ea9 ]
The dma sync operation needs to be done with DMA_BIDIRECTIONAL when
the BO is prepared for both read and write operations.
Fixes: a8c21a5451 ("drm/etnaviv: add initial etnaviv DRM driver")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Christian Gmeiner <cgmeiner@igalia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cb39d05e67dc24985ff9f5150e71040fa4d60ab8 ]
It's expected that both hist entries are in the same hists when
comparing two. But the current code in the function checks one without
dso sort key and other with the key. This would make the condition true
in any case.
I guess the intention of the original commit was to add '!' for the
right side too. But as it should be the same, let's just remove it.
Fixes: 69849fc5d2 ("perf hists: Move sort__has_dso into struct perf_hpp_list")
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240621170528.608772-2-namhyung@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ff16aeb9b83441b8458d4235496cf320189a0c60 ]
The 2 second sleep can cause the test to fail on very slow network file
systems because Perf ends up being killed before it finishes starting
up.
Fix it by making the leafloop workload end after a fixed time like the
other workloads so there is no need to kill it after 2 seconds.
Also remove the 1 second start sampling delay because it is similarly
fragile. Instead, search through all samples for a matching one, rather
than just checking the first sample and hoping it's in the right place.
Fixes: cd6382d827 ("perf test arm64: Test unwinding using fame-pointer (fp) mode")
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: German Gomez <german.gomez@arm.com>
Cc: Spoorthy S <spoorts2@in.ibm.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240612140316.3006660-1-james.clark@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c0dc9adf9474ecb7106e60e5472577375aedaed3 ]
Triggers which have trigger specific sysfs attributes typically store
related data in trigger-data allocated by the activate() callback and
freed by the deactivate() callback.
Calling device_remove_groups() after calling deactivate() leaves a window
where the sysfs attributes show/store functions could be called after
deactivation and then operate on the just freed trigger-data.
Move the device_remove_groups() call to before deactivate() to close
this race window.
This also makes the deactivation path properly do things in reverse order
of the activation path which calls the activate() callback before calling
device_add_groups().
Fixes: a7e7a31563 ("leds: triggers: add device attribute support")
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20240504162533.76780-1-hdegoede@redhat.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a8fb5fce7a441d37d106c82235e1f1b57f70f5b9 ]
In section 4.5.1.5. Initialization, the step 4 may be skipped and
continue with the Capture Setup sequence, so if the capture has been
setup, there is no need to trigger the initial source change event, just
start decoding, and follow the dynamic resolution change flow if the
configured values do not match those parsed by the decoder.
And it won't fail the gstreamer pipeline.
Fixes: b833b178498d ("media: imx-jpeg: notify source chagne event when the first picture parsed")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 31c0fbf67c8c0bb38d7fb21d404ea3dbd619d99e ]
The formula of Coverage alpha blending is:
dst.a = dst.a * (0xff - src.a * SCA / 0xff) / 0xff
+ src.a * SCA / 0xff
dst.a: destination alpha
src.a: pixel alpha
SCA : plane alpha
When SCA = 0xff, the formula becomes:
dst.a = dst.a * (0xff - src.a) + src.a
This patch is to set the destination alpha (background) to 0xff:
- When dst.a = 0 (before), dst.a = src.a
- When dst.a = 0xff (after) , dst.a = 0xff * (0xff - src.a) + src.a
According to the fomula above:
- When src.a = 0 , dst.a = 0
- When src.a = 0xff, dst.a = 0xff
This two cases are just still correct. But when src.a is
between 0 and 0xff, the difference starts to appear
Fixes: 616443ca57 ("drm/mediatek: Move cmdq_reg info from struct mtk_ddp_comp to sub driver private data")
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20240620-igt-v3-5-a9d62d2e2c7e@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a213bc09b1025c771ee722ee341af1d84375db8a ]
The vsp1_partition structure stores the RPF partition configuration in a
single field for all RPF instances, while each RPF can have its own
configuration. Fix it by storing the configuration separately for each
RPF instance.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Fixes: ab45e85851 ("media: v4l: vsp1: Allow entities to participate in the partition algorithm")
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 57edbbcf5258c378a9b9d0c80d33b03a010b22c8 ]
The histogram support mixes _irqsave and _irq, causing the following
smatch warning:
drivers/media/platform/renesas/vsp1/vsp1_histo.c:153 histo_stop_streaming()
warn: mixing irqsave and irq
The histo_stop_streaming() calls spin_lock_irqsave() followed by
wait_event_lock_irq(). The former hints that interrupts may be disabled
by the caller, while the latter reenables interrupts unconditionally.
This doesn't cause any real bug, as the function is always called with
interrupts enabled, but the pattern is still incorrect.
Fix the problem by using spin_lock_irq() instead of spin_lock_irqsave()
in histo_stop_streaming(). While at it, switch to spin_lock_irq() and
spin_lock() as appropriate elsewhere.
Fixes: 99362e3233 ("[media] v4l: vsp1: Add histogram support")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-renesas-soc/164d74ff-312c-468f-be64-afa7182cd2f4@moroto.mountain/
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
