[ Upstream commit 059fe4f8bbdf5cad212e1aeeb3e8968c80b9ff3b ]
The binding's documentation specifies that "As the line is active low, it
should be marked GPIO_ACTIVE_LOW". However, in the driver, it was handled
the opposite way. This commit sets the driver's behaviour in sync with the
documentation
Fixes: 722407a4e8 ("staging:iio:ad7606: Use GPIO descriptor API")
Signed-off-by: Guillaume Stols <gstols@baylibre.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8dc4594b54dbaaba40dc8884ad3d42083de39434 ]
gpiod_set_array_value was misused here: the implementation relied on the
assumption that an unsigned long was required for each gpio, while the
function expects a bit array stored in "as much unsigned long as needed
for storing one bit per GPIO", i.e it is using a bit field.
This leaded to incorrect parameter passed to gpiod_set_array_value, that
would set 1 value instead of 3.
It also prevents to select the software mode correctly for the AD7606B.
Fixes: d2a415c86c ("iio: adc: ad7606: Add support for AD7606B ADC")
Fixes: 41f71e5e7d ("staging: iio: adc: ad7606: Use find_closest() macro")
Signed-off-by: Guillaume Stols <gstols@baylibre.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 63bcf9014e95a7d279d10d8e2caa5d88db2b1855 ]
NVME_NSHEAD_DISK_LIVE is a flag for struct nvme_ns_head, not nvme_ns.
The current code has a typo causing NVME_NSHEAD_DISK_LIVE never to
be cleared once device_add_disk_fails, causing the system never to
create the 'generic' character device. Even several rescan attempts
will change the situation and the system has to be rebooted to fix
the issue.
Fixes: 11384580e3 ("nvme-multipath: add error handling support for add_disk()")
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 329ca3eed4a9a161515a8714be6ba182321385c7 ]
Previously the MR and SCR registers were just set with the supposedly
required values, from cached register values (cached reg content
initialized to zero).
All parts fixed here did not consider the current register (cache)
content, which would make future support of cs_setup, cs_hold, and
cs_inactive impossible.
Setting SCBR in atmel_qspi_setup() erases a possible DLYBS setting from
atmel_qspi_set_cs_timing(). The DLYBS setting is applied by ORing over
the current setting, without resetting the bits first. All writes to MR
did not consider possible settings of DLYCS and DLYBCT.
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Fixes: f732646d0c ("spi: atmel-quadspi: Add support for configuring CS timing")
Link: https://patch.msgid.link/20240918082744.379610-2-ada@thorsis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 65f666c6203600053478ce8e34a1db269a8701c9 ]
When called from sbitmap_queue_get(), sbitmap_deferred_clear() may be run
with preempt disabled. In RT kernel, spin_lock() can sleep, then warning
of "BUG: sleeping function called from invalid context" can be triggered.
Fix it by replacing it with raw_spin_lock.
Cc: Yang Yang <yang.yang@vivo.com>
Fixes: 72d04bdcf3f7 ("sbitmap: fix io hung due to race on sbitmap_word::cleared")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Yang Yang <yang.yang@vivo.com>
Link: https://lore.kernel.org/r/20240919021709.511329-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3b577de206d52dbde9428664b6d823d35a803d75 ]
It's important to undo pm_runtime_use_autosuspend() with
pm_runtime_dont_use_autosuspend() at driver exit time unless driver
initially enabled pm_runtime with devm_pm_runtime_enable()
(which handles it for you).
Hence, call pm_runtime_dont_use_autosuspend() at driver exit time
to fix it.
Fixes: 944c01a889 ("spi: lpspi: enable runtime pm for lpspi")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20240906021251.610462-1-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 438efb23f9581659495b85f1f6c7d5946200660c ]
It's important to undo pm_runtime_use_autosuspend() with
pm_runtime_dont_use_autosuspend() at driver exit time unless driver
initially enabled pm_runtime with devm_pm_runtime_enable()
(which handles it for you).
Hence, call pm_runtime_dont_use_autosuspend() at driver exit time
to fix it.
Fixes: 4a2f83b7f7 ("spi: atmel-quadspi: add runtime pm support")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20240906023956.1004440-1-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 930c6ab93492c4b15436524e704950b364b2930c ]
syzbot reports a f2fs bug as below:
------------[ cut here ]------------
WARNING: CPU: 1 PID: 58 at kernel/rcu/sync.c:177 rcu_sync_dtor+0xcd/0x180 kernel/rcu/sync.c:177
CPU: 1 UID: 0 PID: 58 Comm: kworker/1:2 Not tainted 6.10.0-syzkaller-12562-g1722389b0d86 #0
Workqueue: events destroy_super_work
RIP: 0010:rcu_sync_dtor+0xcd/0x180 kernel/rcu/sync.c:177
Call Trace:
percpu_free_rwsem+0x41/0x80 kernel/locking/percpu-rwsem.c:42
destroy_super_work+0xec/0x130 fs/super.c:282
process_one_work kernel/workqueue.c:3231 [inline]
process_scheduled_works+0xa2c/0x1830 kernel/workqueue.c:3312
worker_thread+0x86d/0xd40 kernel/workqueue.c:3390
kthread+0x2f0/0x390 kernel/kthread.c:389
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
As Christian Brauner pointed out [1]: the root cause is f2fs sets
SB_RDONLY flag in internal function, rather than setting the flag
covered w/ sb->s_umount semaphore via remount procedure, then below
race condition causes this bug:
- freeze_super()
- sb_wait_write(sb, SB_FREEZE_WRITE)
- sb_wait_write(sb, SB_FREEZE_PAGEFAULT)
- sb_wait_write(sb, SB_FREEZE_FS)
- f2fs_handle_critical_error
- sb->s_flags |= SB_RDONLY
- thaw_super
- thaw_super_locked
- sb_rdonly() is true, so it skips
sb_freeze_unlock(sb, SB_FREEZE_FS)
- deactivate_locked_super
Since f2fs has almost the same logic as ext4 [2] when handling critical
error in filesystem if it mounts w/ errors=remount-ro option:
- set CP_ERROR_FLAG flag which indicates filesystem is stopped
- record errors to superblock
- set SB_RDONLY falg
Once we set CP_ERROR_FLAG flag, all writable interfaces can detect the
flag and stop any further updates on filesystem. So, it is safe to not
set SB_RDONLY flag, let's remove the logic and keep in line w/ ext4 [3].
[1] https://lore.kernel.org/all/20240729-himbeeren-funknetz-96e62f9c7aee@brauner
[2] https://lore.kernel.org/all/20240729132721.hxih6ehigadqf7wx@quack3
[3] https://lore.kernel.org/linux-ext4/20240805201241.27286-1-jack@suse.cz
Fixes: b62e71be21 ("f2fs: support errors=remount-ro|continue|panic mountoption")
Reported-by: syzbot+20d7e439f76bbbd863a7@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/000000000000b90a8e061e21d12f@google.com/
Cc: Jan Kara <jack@suse.cz>
Cc: Christian Brauner <brauner@kernel.org>
Signed-off-by: Chao Yu <chao@kernel.org>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fccaa81de87e80b1809906f7e438e5766fbdc172 ]
Keep atomic file clean while updating and make it dirtied during commit
in order to avoid unnecessary and excessive inode updates in the previous
fix.
Fixes: 4bf78322346f ("f2fs: mark inode dirty for FI_ATOMIC_COMMITTED flag")
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f785cec298c95d00058560c0715233294a04b8f3 ]
In f2fs_do_write_data_page, when the data block is NULL_ADDR, it skips
writepage considering that it has been already truncated.
This results in an infinite loop as the PAGECACHE_TAG_TOWRITE tag is not
cleared during the writeback process for a compressed file including
NULL_ADDR in compress_mode=user.
This is the reproduction process:
1. dd if=/dev/zero bs=4096 count=1024 seek=1024 of=testfile
2. f2fs_io compress testfile
3. dd if=/dev/zero bs=4096 count=1 conv=notrunc of=testfile
4. f2fs_io decompress testfile
To prevent the problem, let's check whether the cluster is fully
allocated before redirty its pages.
Fixes: 5fdb322ff2 ("f2fs: add F2FS_IOC_DECOMPRESS_FILE and F2FS_IOC_COMPRESS_FILE")
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Reviewed-by: Sunmin Jeong <s_min.jeong@samsung.com>
Tested-by: Jaewook Kim <jw5454.kim@samsung.com>
Signed-off-by: Yeongjin Gil <youngjin.gil@samsung.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2aaea533bf063ed3b442df5fe5f6abfc538054c9 ]
This patch covers sanity check logic on cluster w/ CONFIG_F2FS_CHECK_FS,
otherwise, there will be performance regression while querying cluster
mapping info.
Callers of f2fs_is_compressed_cluster() only care about whether cluster
is compressed or not, rather than # of valid blocks in compressed cluster,
so, let's adjust f2fs_is_compressed_cluster()'s logic according to
caller's requirement.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Stable-dep-of: f785cec298c9 ("f2fs: compress: don't redirty sparse cluster during {,de}compress")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee745e4736fbf33079d0d0808e1343c2280fd59a ]
Support .shutdown callback in f2fs_sops, then, it can be called to
shut down the file system when underlying block device is marked dead.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Stable-dep-of: c7f114d864ac ("f2fs: fix to avoid use-after-free in f2fs_stop_gc_thread()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a4d7f2b3238fd5f76b9e6434a0bd5d2e29049cff ]
Soft IRQ Thread
- f2fs_write_end_io
- f2fs_defragment_range
- set_page_private_gcing
- type = WB_DATA_TYPE(page, false);
: assign type w/ F2FS_WB_CP_DATA
due to page_private_gcing() is true
- dec_page_count() w/ wrong type
- end_page_writeback()
Value of F2FS_WB_CP_DATA reference count may become negative under above
race condition, the root cause is we missed to wait page writeback before
setting gcing page private flag, let's fix it.
Fixes: 2d1fe8a86b ("f2fs: fix to tag gcing flag on page during file defragment")
Fixes: 4961acdd65c9 ("f2fs: fix to tag gcing flag on page during block migration")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8c1b787938fd86bab27a1492fa887408c75fec2b ]
The i_pino in f2fs_inode_info has the previous parent's i_ino when inode
was renamed, which may cause f2fs_ioc_start_atomic_write to fail.
If file_wrong_pino is true and i_nlink is 1, then to find a valid pino,
we should refer to the dentry from inode.
To resolve this issue, let's get parent inode using parent dentry
directly.
Fixes: 3db1de0e58 ("f2fs: change the current atomic write way")
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Reviewed-by: Sunmin Jeong <s_min.jeong@samsung.com>
Signed-off-by: Yeongjin Gil <youngjin.gil@samsung.com>
Reviewed-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0cac51185e65dc2a20686184e02f3cafc99eb202 ]
If lfs mode is on, buffered read may race w/ OPU dio write as below,
it may cause buffered read hits unwritten data unexpectly, and for
dio read, the race condition exists as well.
Thread A Thread B
- f2fs_file_write_iter
- f2fs_dio_write_iter
- __iomap_dio_rw
- f2fs_iomap_begin
- f2fs_map_blocks
- __allocate_data_block
- allocated blkaddr #x
- iomap_dio_submit_bio
- f2fs_file_read_iter
- filemap_read
- f2fs_read_data_folio
- f2fs_mpage_readpages
- f2fs_map_blocks
: get blkaddr #x
- f2fs_submit_read_bio
IRQ
- f2fs_read_end_io
: read IO on blkaddr #x complete
IRQ
- iomap_dio_bio_end_io
: direct write IO on blkaddr #x complete
In LFS mode, if there is inflight dio, let's wait for its completion,
this policy won't cover all race cases, however it is a tradeoff which
avoids abusing lock around IO paths.
Fixes: f847c699cf ("f2fs: allow out-place-update for direct IO in LFS mode")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aaf8c0b9ae042494cb4585883b15c1332de77840 ]
We may trigger high frequent checkpoint for below case:
1. mkdir /mnt/dir1; set dir1 encrypted
2. touch /mnt/file1; fsync /mnt/file1
3. mkdir /mnt/dir2; set dir2 encrypted
4. touch /mnt/file2; fsync /mnt/file2
...
Although, newly created dir and file are not related, due to
commit bbf156f7af ("f2fs: fix lost xattrs of directories"), we will
trigger checkpoint whenever fsync() comes after a new encrypted dir
created.
In order to avoid such performance regression issue, let's record an
entry including directory's ino in global cache whenever we update
directory's xattr data, and then triggerring checkpoint() only if
xattr metadata of target file's parent was updated.
This patch updates to cover below no encryption case as well:
1) parent is checkpointed
2) set_xattr(dir) w/ new xnid
3) create(file)
4) fsync(file)
Fixes: bbf156f7af ("f2fs: fix lost xattrs of directories")
Reported-by: wangzijie <wangzijie1@honor.com>
Reported-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Tested-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Reported-by: Yunlei He <heyunlei@hihonor.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a0bd289a5db1df8df8fab949633a0b8d3f235ee ]
Case #1:
SQLite App GC Thread Kworker Shrinker
- f2fs_ioc_start_atomic_write
- f2fs_ioc_commit_atomic_write
- f2fs_commit_atomic_write
- filemap_write_and_wait_range
: write atomic_file's data to cow_inode
echo 3 > drop_caches
to drop atomic_file's
cache.
- f2fs_gc
- gc_data_segment
- move_data_page
- set_page_dirty
- writepages
- f2fs_do_write_data_page
: overwrite atomic_file's data
to cow_inode
- f2fs_down_write(&fi->i_gc_rwsem[WRITE])
- __f2fs_commit_atomic_write
- f2fs_up_write(&fi->i_gc_rwsem[WRITE])
Case #2:
SQLite App GC Thread Kworker
- f2fs_ioc_start_atomic_write
- __writeback_single_inode
- do_writepages
- f2fs_write_cache_pages
- f2fs_write_single_data_page
- f2fs_do_write_data_page
: write atomic_file's data to cow_inode
- f2fs_gc
- gc_data_segment
- move_data_page
- set_page_dirty
- writepages
- f2fs_do_write_data_page
: overwrite atomic_file's data to cow_inode
- f2fs_ioc_commit_atomic_write
In above cases racing in between atomic_write and GC, previous
data in atomic_file may be overwrited to cow_file, result in
data corruption.
This patch introduces PAGE_PRIVATE_ATOMIC_WRITE bit flag in page.private,
and use it to indicate that there is last dirty data in atomic file,
and the data should be writebacked into cow_file, if the flag is not
tagged in page, we should never write data across files.
Fixes: 3db1de0e58 ("f2fs: change the current atomic write way")
Cc: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5124bc96162667766f6120b19f57a640c2eccb2a ]
Because hardware will read in multiples of 4 SG entries, ensure
the allocated length is always padded. This was already done
by some callers of ahash_edesc_alloc, but ahash_digest was conspicuously
missing.
In any case, doing it in the allocation function ensures that the
memory is always there.
Reported-by: Guangwu Zhang <guazhang@redhat.com>
Fixes: a5e5c13398 ("crypto: caam - fix S/G table passing page boundary")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d078cbf5c38de83bc31f83c47dcd2184c04a50c7 ]
If not enough buffer space available, but idmap_lookup has triggered
lookup_fn which calls cache_get and returns successfully. Then we
missed to call cache_put here which pairs with cache_get.
Fixes: ddd1ea5636 ("nfsd4: use xdr_reserve_space in attribute encoding")
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Reviwed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 061a785a114f159e990ea8ed8d1b7dca4b41120f ]
Physical addresses under IOVA on x86 platform are mapped contiguously
as a side effect before the patch that removed CONFIG_DMA_REMAP. The
NTB rx buffer ring is a single chunk DMA buffer that is allocated
against the NTB PCI device. If the receive side is using a DMA device,
then the buffers are remapped against the DMA device before being
submitted via the dmaengine API. This scheme becomes a problem when
the physical memory is discontiguous. When dma_map_page() is called
on the kernel virtual address from the dma_alloc_coherent() call, the
new IOVA mapping no longer points to all the physical memory allocated
due to being discontiguous. Change dma_alloc_coherent() to dma_alloc_attrs()
in order to force DMA_ATTR_FORCE_CONTIGUOUS attribute. This is the best
fix for the circumstance. A potential future solution may be having the DMA
mapping API providing a way to alias an existing IOVA mapping to a new
device perhaps.
This fix is not to fix the patch pointed to by the fixes tag, but to fix
the issue arised in the ntb_transport driver on x86 platforms after the
said patch is applied.
Reported-by: Jerry Dai <jerry.dai@intel.com>
Fixes: f5ff79fddf ("dma-mapping: remove CONFIG_DMA_REMAP")
Tested-by: Jerry Dai <jerry.dai@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1501ae7479c8d0f66efdbfdc9ae8d6136cefbd37 ]
The correct printk format is %pa or %pap, but not %pa[p].
Fixes: 99a0605612 ("NTB: ntb_perf: Fix address err in perf_copy_chunk")
Signed-off-by: Max Hawking <maxahawking@sonnenkinder.org>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e229897d373a87ee09ec5cc4ecd4bb2f895fc16b ]
The debugfs_create_dir() function returns error pointers.
It never returns NULL. So use IS_ERR() to check it.
Fixes: e26a5843f7 ("NTB: Split ntb_hw_intel and ntb_transport drivers")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e766e6a92410ca269161de059fff0843b8ddd65f ]
The lookup_atid() function can return NULL if the ATID is
invalid or does not exist in the identifier table, which
could lead to dereferencing a null pointer without a
check in the `act_establish()` and `act_open_rpl()` functions.
Add a NULL check to prevent null pointer dereferencing.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: cfdda9d764 ("RDMA/cxgb4: Add driver for Chelsio T4 RNIC")
Signed-off-by: Mikhail Lobanov <m.lobanov@rosalinux.ru>
Link: https://patch.msgid.link/20240912145844.77516-1-m.lobanov@rosalinux.ru
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fe51f6254d81f5a69c31df16353d6539b2b51630 ]
When allocating MTT hem, for each hop level of each hem that is being
allocated, the driver iterates the hem list to find out whether the
bt page has been allocated in this hop level. If not, allocate a new
one and splice it to the list. The time complexity is O(n^2) in worst
cases.
Currently the allocation for-loop uses 'unit' as the step size. This
actually has taken into account the reuse of last-hop-level MTT bt
pages by multiple buffer pages. Thus pages of last hop level will
never have been allocated, so there is no need to iterate the hem list
in last hop level.
Removing this unnecessary iteration can reduce the time complexity to
O(n).
Fixes: 38389eaa4d ("RDMA/hns: Add mtr support for mixed multihop addressing")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20240906093444.3571619-9-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd8489294dd2beefb70f12ec4f6132aeec61a4d0 ]
Currently rsv_qp is freed before ib_unregister_device() is called
on HIP08. During the time interval, users can still dereg MR and
rsv_qp will be used in this process, leading to a UAF. Move the
release of rsv_qp after calling ib_unregister_device() to fix it.
Fixes: 70f9252158 ("RDMA/hns: Use the reserved loopback QPs to free MR before destroying MPT")
Signed-off-by: wenglianfa <wenglianfa@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20240906093444.3571619-3-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d9d6d300fb0a4ae4431bb308027ac9385746d42 ]
Parts of the suspend and resume chain is left unprotected if we disable
the WDT here.
>From experiments we can see that the SCU disables and re-enables the WDT
when we enter and leave suspend to ram. By not touching the WDT here we
are protected by the WDT all the way to the SCU.
Signed-off-by: Jonas Blixt <jonas.blixt@actia.se>
CC: Anson Huang <anson.huang@nxp.com>
Fixes: 986857acbc ("watchdog: imx_sc: Add i.MX system controller watchdog support")
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240801121845.1465765-1-jonas.blixt@actia.se
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee6d57a2e13d11ce9050cfc3e3b69ef707a44a63 ]
When searching the MR cache for suitable cache entries, don't use mkeys
larger than twice the size required for the MR.
This should ensure the usage of mkeys closer to the minimal required size
and reduce memory waste.
On driver init we create entries for mkeys with clear attributes and
powers of 2 sizes from 4 to the max supported size.
This solves the issue for anyone using mkeys that fit these
requirements.
In the use case where an MR is registered with different attributes,
like an access flag we can't UMR, we'll create a new cache entry to store
it upon dereg.
Without this fix, any later registration with same attributes and smaller
size will use the newly created cache entry and it's mkeys, disregarding
the memory waste of using mkeys larger than required.
For example, one worst-case scenario can be when registering and
deregistering a 1GB mkey with ATS enabled which will cause the creation of
a new cache entry to hold those type of mkeys. A user registering a 4k MR
with ATS will end up using the new cache entry and an mkey that can
support a 1GB MR, thus wasting x250k memory than actually needed in the HW.
Additionally, allow all small registration to use the smallest size
cache entry that is initialized on driver load even if size is larger
than twice the required size.
Fixes: 73d09b2fe8 ("RDMA/mlx5: Introduce mlx5r_cache_rb_key")
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/8ba3a6e3748aace2026de8b83da03aba084f78f4.1725362530.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c500a86693a126c9393e602741e348f80f1b0fc5 ]
Within kirin_pcie_parse_port(), the pcie->num_slots is compared to
pcie->gpio_id_reset size (MAX_PCI_SLOTS) which is correct and would lead
to an overflow.
Thus, fix condition to pcie->num_slots + 1 >= MAX_PCI_SLOTS and move
pcie->num_slots increment below the if-statement to avoid out-of-bounds
array access.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: b22dbbb245 ("PCI: kirin: Support PERST# GPIOs for HiKey970 external PEX 8606 bridge")
Link: https://lore.kernel.org/linux-pci/20240903115823.30647-1-adiupina@astralinux.ru
Signed-off-by: Alexandra Diupina <adiupina@astralinux.ru>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a7926176378460e0d91e02b03f0ff20a8709a60 ]
If we wait_for_construction and find that the file is no longer hashed,
and we're going to retry the open, the old nfsd_file reference is
currently leaked. Put the reference before retrying.
Fixes: c6593366c0 ("nfsd: don't kill nfsd_files because of lease break error")
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Youzhong Yang <youzhong@gmail.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 81a95c2b1d605743220f28db04b8da13a65c4059 ]
Given that we do the search and insertion while holding the i_lock, I
don't think it's possible for us to get EEXIST here. Remove this case.
Fixes: c6593366c0 ("nfsd: don't kill nfsd_files because of lease break error")
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Youzhong Yang <youzhong@gmail.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
