Documentation/arm64/tagged-address-abi.rst introduces the
relaxation of the syscall ABI that allows userspace to pass
certain tagged pointers to kernel syscalls.
Add the document to index.rst for a correct generation of the
table of content.
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
(cherry picked from commit 1243cb6a67)
Signed-off-by: Mark Salyzyn <salyzyn@google.com>
Bug: 154668398
Change-Id: Icc2f0c23da38fa30d667be361792e8cb996ac313
Using an old .config in combination with "make oldconfig" can cause
an incorrect detection of the compat compiler:
$ grep CROSS_COMPILE_COMPAT .config
CONFIG_CROSS_COMPILE_COMPAT_VDSO=""
$ make oldconfig && make
arch/arm64/Makefile:58: gcc not found, check CROSS_COMPILE_COMPAT.
Stop.
Accordingly to the section 7.2 of the GNU Make manual "Syntax of
Conditionals", "When the value results from complex expansions of
variables and functions, expansions you would consider empty may
actually contain whitespace characters and thus are not seen as
empty. However, you can use the strip function to avoid interpreting
whitespace as a non-empty value."
Fix the issue adding strip to the CROSS_COMPILE_COMPAT string
evaluation.
Reported-by: Matteo Croce <mcroce@redhat.com>
Tested-by: Matteo Croce <mcroce@redhat.com>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit a22c5cf5d3)
Signed-off-by: Mark Salyzyn <salyzyn@google.com>
Bug: 154668398
Change-Id: I148c0a389ed4596ebee226eff2b4ee08c2181213
Running "make" on an already compiled kernel tree will rebuild the
vdso library even if this has not been modified.
$ make
GEN Makefile
Using linux as source for kernel
CALL linux/scripts/atomic/check-atomics.sh
CALL linux/scripts/checksyscalls.sh
<stdin>:1511:2: warning: #warning syscall clone3 not implemented [-Wcpp]
CHK include/generated/compile.h
VDSO arch/mips/vdso/vdso.so.dbg.raw
OBJCOPY arch/mips/vdso/vdso.so.raw
GENVDSO arch/mips/vdso/vdso-image.c
CC arch/mips/vdso/vdso-image.o
AR arch/mips/vdso/built-in.a
AR arch/mips/built-in.a
CHK include/generated/autoksyms.h
GEN .version
CHK include/generated/compile.h
UPD include/generated/compile.h
CC init/version.o
AR init/built-in.a
LD vmlinux.o
MODPOST vmlinux.o
MODINFO modules.builtin.modinfo
KSYM .tmp_kallsyms1.o
KSYM .tmp_kallsyms2.o
LD vmlinux
SORTEX vmlinux
SYSMAP System.map
Building modules, stage 2.
ITS arch/mips/boot/vmlinux.gz.its
OBJCOPY arch/mips/boot/vmlinux.bin
MODPOST 7 modules
GZIP arch/mips/boot/vmlinux.bin.gz
ITB arch/mips/boot/vmlinux.gz.itb
The issue is generated by the fact that "if_changed" is called twice
in a single target.
Fix the build bug merging the two commands into a single function.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
(cherry picked from commit cdab7e2c73)
Signed-off-by: Mark Salyzyn <salyzyn@google.com>
Bug: 154668398
Change-Id: I889075fb84feac7b3c4e245cb9adb251e021d03b
The vdso library for o32 and n32 does not compile compile correctly when
building outside of the source tree due to a wrong inclusion path for
config-n32-o32-env.c resulting in the error below:
cc1: fatal error: arch/mips/vdso/config-n32-o32-env.c:
No such file or dnirectory
compilation terminated.
arch/mips/vdso/Makefile:153: recipe for target
'arch/mips/vdso/vgettimeofday-o32.o' failed
make[3]: *** [arch/mips/vdso/vgettimeofday-o32.o] Error 1
scripts/Makefile.build:490: recipe for target 'arch/mips/vdso' failed
Fix the config-n32-o32-env.c inclusion path prepending the $(srctree)
variable.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
[paul.burton@mips.com: Note that this occurs specifically when building
outside of the source tree.]
Signed-off-by: Paul Burton <paul.burton@mips.com>
(cherry picked from commit b4c0f7fa53)
Signed-off-by: Mark Salyzyn <salyzyn@google.com>
Bug: 154668398
Change-Id: I421a6bab3ce4434be5cec411000f3c48b7326fdf
With the release of Linux 5.1 has been added a new syscall,
clock_gettime64, that provided a 64 bit time value for a specified
clock_ID to make the kernel Y2038 safe on 32 bit architectures.
Update the mips32 specific vDSO library accordingly with what it has
been done for the kernel syscall exposing the clock_gettime64 entry
point.
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
(cherry picked from commit 1f66c45db3)
Signed-off-by: Mark Salyzyn <salyzyn@google.com>
Bug: 154668398
Change-Id: Iddc198f2c93163bb28413ac06d3ac0c50331d0cc
The generic vDSO library provides an implementation of clock_getres()
that can be leveraged by each architecture.
Add clock_getres() entry point on mips.
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
(cherry picked from commit abed3d826f)
Signed-off-by: Mark Salyzyn <salyzyn@google.com>
Bug: 154668398
Change-Id: I6f408b668f4e11d706ca243ba997b105ba28a345
The mips vDSO library requires some adaptations to take advantage of the
newly introduced generic vDSO library.
Introduce the following changes:
- Modification of vdso.c to be compliant with the common vdso datapage
- Use of lib/vdso for gettimeofday
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
[paul.burton@mips.com: Prepend $(src) to config-n32-o32-env.c path.]
Signed-off-by: Paul Burton <paul.burton@mips.com>
(cherry picked from commit 24640f233b)
Signed-off-by: Mark Salyzyn <salyzyn@google.com>
Bug: 154668398
Change-Id: I96d93cf6fe9294ff000e3b5deff691c74b9756fa
Commit 691efbedc6 ("arm64: vdso: use $(LD) instead of $(CC) to
link VDSO") switched to using LD explicitly. The --build-id option
needs to be passed explicitly, similar to x86. Add this option.
Fixes: 691efbedc6 ("arm64: vdso: use $(LD) instead of $(CC) to link VDSO")
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Laura Abbott <labbott@redhat.com>
[will: drop redundant use of 'call ld-option' as requested by Masahiro]
Signed-off-by: Will Deacon <will.deacon@arm.com>
(cherry picked from commit 7a0a93c517)
Signed-off-by: Mark Salyzyn <salyzyn@google.com>
Bug: 154668398
Change-Id: I439082ca9de2279ce368a0160fa03885077794f5
We use $(LD) to link vmlinux, modules, decompressors, etc.
VDSO is the only exceptional case where $(CC) is used as the linker
driver, but I do not know why we need to do so. VDSO uses a special
linker script, and does not link standard libraries at all.
I changed the Makefile to use $(LD) rather than $(CC). I tested this,
and VDSO worked for me.
Users will be able to use their favorite linker (e.g. lld instead of
of bfd) by passing LD= from the command line.
My plan is to rewrite all VDSO Makefiles to use $(LD), then delete
cc-ldoption.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
(cherry picked from commit 691efbedc6)
Signed-off-by: Mark Salyzyn <salyzyn@google.com>
Bug: 154668398
Change-Id: Ic3c639891725ebf3544534a099684ed77c7d12e8
The recent changes to the vdso library for arm64 and the introduction of
the compat vdso library have generated some misalignment in the
Makefiles.
Cleanup the Makefiles for vdso and vdso32 libraries:
* Removing unused rules.
* Unifying the displayed compilation messages.
* Simplifying the generic library inclusion path for
arm64 vdso.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
(cherry picked from commit a88754b231)
Signed-off-by: Mark Salyzyn <salyzyn@google.com>
Bug: 154668398
Change-Id: I36ff14321f6cf9c727721f707395cb45f9fc3556
Prior to the introduction of Unified vDSO support and compat layer for
vDSO on arm64, AT_SYSINFO_EHDR was not defined for compat tasks.
In the current implementation, AT_SYSINFO_EHDR is defined even if the
compat vdso layer is not built, which has been shown to break Android
applications using bionic:
| 01-01 01:22:14.097 755 755 F libc : Fatal signal 11 (SIGSEGV),
| code 1 (SEGV_MAPERR), fault addr 0x3cf2c96c in tid 755 (cameraserver),
| pid 755 (cameraserver)
| 01-01 01:22:14.112 759 759 F libc : Fatal signal 11 (SIGSEGV),
| code 1 (SEGV_MAPERR), fault addr 0x3cf2c96c in tid 759
| (android.hardwar), pid 759 (android.hardwar)
| 01-01 01:22:14.120 756 756 F libc : Fatal signal 11 (SIGSEGV)
| code 1 (SEGV_MAPERR), fault addr 0x3cf2c96c in tid 756 (drmserver),
| pid 756 (drmserver)
Restore the old behaviour by making sure that AT_SYSINFO_EHDR for compat
tasks is defined only when CONFIG_COMPAT_VDSO is enabled.
Reported-by: John Stultz <john.stultz@linaro.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
(cherry picked from commit 85751e9e5b)
Signed-off-by: Mark Salyzyn <salyzyn@google.com>
Bug: 154668398
Change-Id: I0408f50b541a4f786c340222babbeb15d9ce272a
The generic VDSO implementation uses the Y2038 safe clock_gettime64() and
clock_getres_time64() syscalls as fallback for 32bit VDSO. This breaks
seccomp setups because these syscalls might be not (yet) allowed.
Implement the 32bit variants which use the legacy syscalls and select the
variant in the core library.
The 64bit time variants are not removed because they are required for the
time64 based vdso accessors.
Fixes: 7ac8707479 ("x86/vdso: Switch to generic vDSO implementation")
Reported-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reported-by: Paul Bolle <pebolle@tiscali.nl>
Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20190728131648.879156507@linutronix.de
(cherry picked from commit d2f5d3fa26)
Signed-off-by: Mark Salyzyn <salyzyn@google.com>
Bug: 154668398
Change-Id: I8b1b562bab3cdcb78d0d229bfeebe739f1992437
Two consecutive "make" on an already compiled kernel tree will show
different behavior:
$ make
CALL scripts/checksyscalls.sh
CALL scripts/atomic/check-atomics.sh
DESCEND objtool
CHK include/generated/compile.h
VDSOCHK arch/x86/entry/vdso/vdso64.so.dbg
VDSOCHK arch/x86/entry/vdso/vdso32.so.dbg
Kernel: arch/x86/boot/bzImage is ready (#3)
Building modules, stage 2.
MODPOST 12 modules
$ make
make
CALL scripts/checksyscalls.sh
CALL scripts/atomic/check-atomics.sh
DESCEND objtool
CHK include/generated/compile.h
VDSO arch/x86/entry/vdso/vdso64.so.dbg
OBJCOPY arch/x86/entry/vdso/vdso64.so
VDSO2C arch/x86/entry/vdso/vdso-image-64.c
CC arch/x86/entry/vdso/vdso-image-64.o
VDSO arch/x86/entry/vdso/vdso32.so.dbg
OBJCOPY arch/x86/entry/vdso/vdso32.so
VDSO2C arch/x86/entry/vdso/vdso-image-32.c
CC arch/x86/entry/vdso/vdso-image-32.o
AR arch/x86/entry/vdso/built-in.a
AR arch/x86/entry/built-in.a
AR arch/x86/built-in.a
GEN .version
CHK include/generated/compile.h
UPD include/generated/compile.h
CC init/version.o
AR init/built-in.a
LD vmlinux.o
<snip>
This is causing "LD vmlinux" once every two times even without any
modifications. This is the same bug fixed in commit 92a4728608
("x86/boot: Fix if_changed build flip/flop bug"). Two "if_changed" cannot
be used in one target.
Fix this merging two commands into one function.
Fixes: 7ac8707479 ("x86/vdso: Switch to generic vDSO implementation")
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Link: https://lkml.kernel.org/r/20190712101556.17833-1-naohiro.aota@wdc.com
(cherry picked from commit e9a1379f92)
Signed-off-by: Mark Salyzyn <salyzyn@google.com>
Bug: 154668398
Change-Id: Icb94029fbdce1ec2308a7432ec067a8dd820a8e8
We have a special segment descriptor entry in the GDT, whose sole purpose is to
encode the CPU and node numbers in its limit (size) field. There are user-space
instructions that allow the reading of the limit field, which gives us a really
fast way to read the CPU and node IDs from the vDSO for example.
But the naming of related functionality does not make this clear, at all:
VDSO_CPU_SIZE
VDSO_CPU_MASK
__CPU_NUMBER_SEG
GDT_ENTRY_CPU_NUMBER
vdso_encode_cpu_node
vdso_read_cpu_node
There's a number of problems:
- The 'VDSO_CPU_SIZE' doesn't really make it clear that these are number
of bits, nor does it make it clear which 'CPU' this refers to, i.e.
that this is about a GDT entry whose limit encodes the CPU and node number.
- Furthermore, the 'CPU_NUMBER' naming is actively misleading as well,
because the segment limit encodes not just the CPU number but the
node ID as well ...
So use a better nomenclature all around: name everything related to this trick
as 'CPUNODE', to make it clear that this is something special, and add
_BITS to make it clear that these are number of bits, and propagate this to
every affected name:
VDSO_CPU_SIZE => VDSO_CPUNODE_BITS
VDSO_CPU_MASK => VDSO_CPUNODE_MASK
__CPU_NUMBER_SEG => __CPUNODE_SEG
GDT_ENTRY_CPU_NUMBER => GDT_ENTRY_CPUNODE
vdso_encode_cpu_node => vdso_encode_cpunode
vdso_read_cpu_node => vdso_read_cpunode
This, beyond being less confusing, also makes it easier to grep for all related
functionality:
$ git grep -i cpunode arch/x86
Also, while at it, fix "return is not a function" style sloppiness in vdso_encode_cpunode().
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Chang S. Bae <chang.seok.bae@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Markus T Metzger <markus.t.metzger@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Shankar <ravi.v.shankar@intel.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/1537312139-5580-2-git-send-email-chang.seok.bae@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
(cherry picked from commit 22245bdf0a)
Signed-off-by: Mark Salyzyn <salyzyn@google.com>
Bug: 154668398
Change-Id: I643e6b0b003c6c28119a2527fc773c8c2883ecf8
clock_getres in the vDSO library has to preserve the same behaviour
of posix_get_hrtimer_res().
In particular, posix_get_hrtimer_res() does:
sec = 0;
ns = hrtimer_resolution;
and hrtimer_resolution depends on the enablement of the high
resolution timers that can happen either at compile or at run time.
Fix the nds32 vdso implementation of clock_getres keeping a copy of
hrtimer_resolution in vdso data and using that directly.
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>
(cherry picked from commit af9abd6598)
Signed-off-by: Mark Salyzyn <salyzyn@google.com>
Bug: 154668398
Change-Id: Ic66e6358c4f5f32abc968a6ebb4868eaa7d07a37
With the introduction of the config option that allows to enable kuser
helpers, it is now possible to reduce TASK_SIZE_32 when these are
disabled and 64K pages are enabled. This extends the compliance with
the section 6.5.8 of the C standard (C99).
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
(cherry picked from commit 359db57c34)
Signed-off-by: Mark Salyzyn <salyzyn@google.com>
Bug: 154668398
Change-Id: I1030a5afb426470f575540811ed25929a50cfd11
When kuser helpers are enabled the kernel maps the relative code at
a fixed address (0xffff0000). Making configurable the option to disable
them means that the kernel can remove this mapping and any access to
this memory area results in a sigfault.
Add a KUSER_HELPERS config option that can be used to disable the
mapping when it is turned off.
This option can be turned off if and only if the applications are
designed specifically for the platform and they do not make use of the
kuser helpers code.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
[will: Use IS_ENABLED() instead of #ifdef]
Signed-off-by: Will Deacon <will.deacon@arm.com>
(cherry picked from commit af1b3cf2c2)
Signed-off-by: Mark Salyzyn <salyzyn@google.com>
Bug: 154668398
Change-Id: I7bca1cd4bd1784d69de17e10832a9b36f81c443d
aarch32_alloc_vdso_pages() needs to be refactored to make it
easier to disable kuser helpers.
Divide the function in aarch32_alloc_kuser_vdso_page() and
aarch32_alloc_sigreturn_vdso_page().
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
[will: Inlined sigpage allocation to simplify error paths]
Signed-off-by: Will Deacon <will.deacon@arm.com>
(cherry picked from commit 1255a7341b)
Signed-off-by: Mark Salyzyn <salyzyn@google.com>
Bug: 154668398
Change-Id: Ia54bc0f0c0ae34b863f46df0b15b46657f934e81
To make it possible to disable kuser helpers in aarch32 we need to
divide the kuser and the sigreturn functionalities.
Split the current version of kuser32 in kuser32 (for kuser helpers)
and sigreturn32 (for sigreturn helpers).
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
(cherry picked from commit d1e5ca64d5)
Signed-off-by: Mark Salyzyn <salyzyn@google.com>
Bug: 154668398
Change-Id: I9f3e64a6e6fabfb6c6f0a7e66286ed379b146d99
For AArch32 tasks, we install a special "[vectors]" page that contains
the sigreturn trampolines and kuser helpers, which is mapped at a fixed
address specified by the kuser helpers ABI.
Having the sigreturn trampolines in the same page as the kuser helpers
makes it impossible to disable the kuser helpers independently.
Follow the Arm implementation, by moving the signal trampolines out of
the "[vectors]" page and into their own "[sigpage]".
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
[will: tweaked comments and fixed sparse warning]
Signed-off-by: Will Deacon <will.deacon@arm.com>
(cherry picked from commit 0d747f6585)
Signed-off-by: Mark Salyzyn <salyzyn@google.com>
Bug: 154668398
Change-Id: I9f86427ec81a244a5c19fd707147dde0f61be4ad
This feature is only used by arm/arm64 boards but it builds on x86 too
so enable it everywhere for build coverage.
Bug: 153699377
Bug: 154880035
Change-Id: I30c78c394c7d95a02d75d39101c414d37b824024
Signed-off-by: Alistair Delva <adelva@google.com>
Use the FG_TYPE property to report the type of FG
present in the system. For example on QG, it is
voltage-mode based QG or cc-mode based QG.
Change-Id: Iaad3ad29b2d778eed215d420a23b601587163e83
Bug: 155087902
Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
(cherry picked from commit 1c044cbc16076f1e0cd328e6b6684eb57c1ba07b)
Signed-off-by: Will McVicker <willmcvicker@google.com>
This may be used for vendor haptics initialization. So include here for
vendors.
Signed-off-by: Will McVicker <willmcvicker@google.com>
Bug: 154966878
Change-Id: I1716ec5246c7e2642902db3768026573d72bdd8f
