resctrl uses struct rdt_resource to describe the available hardware
resources. The domains of the CDP aliases share a single ctrl_val[]
array. The only differences between the struct rdt_hw_resource aliases
is the name and conf_type.
The name from struct rdt_hw_resource is visible to user-space. To
support another architecture, as many user-visible details should be
handled in the filesystem parts of the code that is common to all
architectures. The name and conf_type go together.
Remove conf_type and the CDP aliases. When CDP is supported and enabled,
schemata_list_create() can create two schemata using the single
resource, generating the CODE/DATA suffix to the schema name itself.
This allows the alloc_ctrlval_array() and complications around free()ing
the ctrl_val arrays to be removed.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-25-james.morse@arm.com
resctrl_arch_update_domains() specifies the one closid that has been
modified and needs copying to the hardware.
resctrl_arch_update_domains() takes a struct rdt_resource and a closid
as arguments, but copies all the staged configurations for that closid
into the ctrl_val[] array.
resctrl_arch_update_domains() is called once per schema, but once the
resources and domains are merged, the second call of a L2CODE/L2DATA
pair will find no staged configurations, as they were previously
applied. The msr_param of the first call only has one index, so would
only have update the hardware for the last staged configuration.
To avoid a second round of IPIs when changing L2CODE and L2DATA in one
go, expand the range of the msr_param if multiple staged configurations
are found.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-24-james.morse@arm.com
When CDP is enabled, rdt_cdp_peer_get() finds the alternative
CODE/DATA resource and returns the alternative domain. This is used
to determine if bitmaps overlap when there are aliased entries
in the two struct rdt_hw_resources.
Now that the ctrl_val[] used by the CODE/DATA resources is the same,
the search for an alternate resource/domain is not needed.
Replace rdt_cdp_peer_get() with resctrl_peer_type(), which returns
the alternative type. This can be passed to resctrl_arch_get_config()
with the same resource and domain.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-23-james.morse@arm.com
Each struct rdt_hw_resource has its own ctrl_val[] array. When CDP is
enabled, two resources are in use, each with its own ctrl_val[] array
that holds half of the configuration used by hardware. One uses the odd
slots, the other the even. rdt_cdp_peer_get() is the helper to find the
alternate resource, its domain, and corresponding entry in the other
ctrl_val[] array.
Once the CDP resources are merged there will be one struct
rdt_hw_resource and one ctrl_val[] array for each hardware resource.
This will include changes to rdt_cdp_peer_get(), making it hard to
bisect any issue.
Merge the ctrl_val[] arrays for three CODE/DATA/NONE resources first.
Doing this before merging the resources temporarily complicates
allocating and freeing the ctrl_val arrays. Add a helper to allocate
the ctrl_val array, that returns the value on the L2 or L3 resource if
it already exists. This gets removed once the resources are merged, and
there really is only one ctrl_val[] array.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-22-james.morse@arm.com
resctrl uses cbm_idx() to map a closid to an index in the configuration
array. This is based on a multiplier and offset that are held in the
resource.
To merge the resources, the resctrl arch code needs to calculate the
index from something else, as there will only be one resource.
Decide based on the staged configuration type. This makes the static
mult and offset parameters redundant.
[ bp: Remove superfluous brackets in get_config_index() ]
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-21-james.morse@arm.com
When resctrl comes to copy the CAT MSR values from the ctrl_val[] array
into hardware, it applies an offset adjustment based on the type of
the resource. CODE and DATA resources have their closid mapped into an
odd/even range. This mapping is based on a property of the resource.
This happens once the new control value has been written to the ctrl_val[]
array. Once the CDP resources are merged, there will only be a single
property that needs to cover both odd/even mappings to the single
ctrl_val[] array. The offset adjustment must be applied before the new
value is written to the array.
Move the logic from cat_wrmsr() to resctrl_arch_update_domains(). The
value provided to apply_config() is now an index in the array, not the
closid. The parameters provided via struct msr_param are now indexes
too. As resctrl's use of closid is a u32, struct msr_param's type is
changed to match.
With this, the CODE and DATA resources only use the odd or even
indexes in the array. This allows the temporary num_closid/2 fixes in
domain_setup_ctrlval() and reset_all_ctrls() to be removed.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-20-james.morse@arm.com
The CODE and DATA resources report a num_closid that is half the actual
size supported by the hardware. This behaviour is visible to user-space
when CDP is enabled.
The CODE and DATA resources have their own ctrlval arrays which are
half the size of the underlying hardware because num_closid was already
adjusted. One holds the odd configurations values, the other even.
Before the CDP resources can be merged, the 'half the closids' behaviour
needs to be implemented by schemata_list_create(), but this causes the
ctrl_val[] array to be full sized.
Remove the logic from the architecture specific rdt_get_cdp_config()
setup, and add it to schemata_list_create(). Functions that walk all the
configurations, such as domain_setup_ctrlval() and reset_all_ctrls(),
take num_closid directly from struct rdt_hw_resource also have
to halve num_closid as only the lower half of each array is in
use. domain_setup_ctrlval() and reset_all_ctrls() both copy struct
rdt_hw_resource's num_closid to a struct msr_param. Correct the value
here.
This is temporary as a subsequent patch will merge all three ctrl_val[]
arrays such that when CDP is in use, the CODA/DATA layout in the array
matches the hardware. reset_all_ctrls()'s loop over the whole of
ctrl_val[] is not touched as this is harmless, and will be required as
it is once the resources are merged.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-19-james.morse@arm.com
The ctrl_val[] array for a struct rdt_hw_resource only holds
configurations of one type. The type is implicit.
Once the CDP resources are merged, the ctrl_val[] array will hold all
the configurations for the hardware resource. When a particular type of
configuration is needed, it must be specified explicitly.
Pass the expected type from the schema into resctrl_arch_get_config().
Nothing uses this yet, but once a single ctrl_val[] array is used for
the three struct rdt_hw_resources that share hardware, the type will be
used to return the correct configuration value from the shared array.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-18-james.morse@arm.com
Functions like show_doms() reach into the architecture's private
structure to retrieve the configuration from the struct rdt_hw_resource.
The hardware configuration may look completely different to the
values resctrl gets from user-space. The staged configuration and
resctrl_arch_update_domains() allow the architecture to convert or
translate these values.
Resctrl shouldn't read or write the ctrl_val[] values directly. Add
a helper to read the current configuration. This will allow another
architecture to scale the bitmaps if necessary, and possibly use
controls that don't take the user-space control format at all.
Of the remaining functions that access ctrl_val[] directly,
apply_config() is part of the architecture-specific code, and is
called via resctrl_arch_update_domains(). reset_all_ctrls() will be an
architecture specific helper.
update_mba_bw() manipulates both ctrl_val[], mbps_val[] and the
hardware. The mbps_val[] that matches the mba_sc state of the resource
is changed, but the other is left unchanged. Abstracting this is the
subject of later patches that affect set_mba_sc() too.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-17-james.morse@arm.com
Before the CDP resources can be merged, struct rdt_domain will need an
array of struct resctrl_staged_config, one per type of configuration.
Use the type as an index to the array to ensure that a schema
configuration string can't specify the same domain twice. This will
allow two schemata to apply configuration changes to one resource.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-15-james.morse@arm.com
When configuration changes are made, the new value is written to struct
rdt_domain's new_ctrl field and the have_new_ctrl flag is set. Later
new_ctrl is copied to hardware by a call to update_domains().
Once the CDP resources are merged, there will be one new_ctrl field in
use by two struct resctrl_schema requiring a per-schema IPI to copy the
value to hardware.
Move new_ctrl and have_new_ctrl into a new struct resctrl_staged_config.
Before the CDP resources can be merged, struct rdt_domain will need an
array of these, one per type of configuration. Using the type as an
index to the array will ensure that a schema configuration string can't
specify the same domain twice.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-14-james.morse@arm.com
resctrl 'info' directories and schema parsing use the schema name.
This lives in the struct rdt_resource, and is specified by the
architecture code.
Once the CDP resources are merged, there will only be one resource (and
one name) in use by two schemata. To allow the CDP CODE/DATA property to
be the type of configuration the schema uses, the name should also be
per-schema.
Add a name field to struct resctrl_schema, and use this wherever
the schema name is exposed (or read from) user-space. Calculating
max_name_width for padding the schemata file also moves as this is
visible to user-space. As the names in struct rdt_resource already
include the CDP information, schemata_list_create() copies them.
schemata_list_create() includes the length of the CDP suffix when
calculating max_name_width in preparation for CDP resources being
merged.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-13-james.morse@arm.com
Whether CDP is enabled for a hardware resource like the L3 cache can be
found by inspecting the alloc_enabled flags of the L3CODE/L3DATA struct
rdt_hw_resources, even if they aren't in use.
Once these resources are merged, the flags can't be compared. Whether
CDP is enabled needs tracking explicitly. If another architecture is
emulating CDP the behaviour may not be per-resource. 'cdp_capable' needs
to be visible to resctrl, even if its not in use, as this affects the
padding of the schemata table visible to user-space.
Add cdp_enabled to struct rdt_hw_resource and cdp_capable to struct
rdt_resource. Add resctrl_arch_set_cdp_enabled() to let resctrl enable
or disable CDP on a resource. resctrl_arch_get_cdp_enabled() lets it
read the current state.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-12-james.morse@arm.com
Once the CDP resources are merged, there will be two struct
resctrl_schema for one struct rdt_resource. CDP becomes a type of
configuration that belongs to the schema.
Helpers like rdtgroup_cbm_overlaps() need access to the schema to query
the configuration (or configurations) based on schema properties.
Change these functions to take a struct schema instead of the struct
rdt_resource. All the modified functions are part of the filesystem code
that will move to /fs/resctrl once it is possible to support a second
architecture.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-10-james.morse@arm.com
To initialise struct resctrl_schema's num_closid, schemata_list_create()
reaches into the architectures private structure to retrieve num_closid
from the struct rdt_hw_resource. The 'half the closids' behaviour should
be part of the filesystem parts of resctrl that are the same on any
architecture. struct resctrl_schema's num_closid should include any
correction for CDP.
Having two properties called num_closid is likely to be confusing when
they have different values.
Add a helper to read the resource's num_closid from the arch code.
This should return the number of closid that the resource supports,
regardless of whether CDP is in use. Once the CDP resources are merged,
schemata_list_create() can apply the correction itself.
Using a type with an obvious size for the arch helper means changing the
type of num_closid to u32, which matches the type already used by struct
rdtgroup.
reset_all_ctrls() does not use resctrl_arch_get_num_closid(), even
though it sets up a structure for modifying the hardware. This function
will be part of the architecture code, the maximum closid should be the
maximum value the hardware has, regardless of the way resctrl is using
it. All the uses of num_closid in core.c are naturally part of the
architecture specific code.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-9-james.morse@arm.com
Struct resctrl_schema holds properties that vary with the style of
configuration that resctrl applies to a resource. There are already
two values for the hardware's num_closid, depending on whether the
architecture presents the L3 or L3CODE/L3DATA resources.
As the way CDP changes the number of control groups that resctrl can
create is part of the user-space interface, it should be managed by the
filesystem parts of resctrl. This allows the architecture code to only
describe the value the hardware supports.
Add num_closid to resctrl_schema. This is the value seen by the
filesystem, which may be different to the maximum value described by the
arch code when CDP is enabled.
These functions operate on the num_closid value that is exposed to
user-space:
* rdtgroup_parse_resource()
* rdtgroup_schemata_show()
* rdt_num_closids_show()
* closid_init()
Change them to use the schema value instead. schemata_list_create() sets
this value, and reaches into the architecture-specific structure to get
the value. This will eventually be replaced with a helper.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-8-james.morse@arm.com
When parsing a schema configuration value from user-space, resctrl walks
the architectures rdt_resources_all[] array to find a matching struct
rdt_resource.
Once the CDP resources are merged there will be one resource in use
by two schemata. Anything walking rdt_resources_all[] on behalf of a
user-space request should walk the list of struct resctrl_schema
instead.
Change the users of for_each_alloc_enabled_rdt_resource() to walk the
schema instead. Schemata were only created for alloc_enabled resources
so these two lists are currently equivalent.
schemata_list_create() and rdt_kill_sb() are ignored. The first
creates the schema list, and will eventually loop over the resource
indexes using an arch helper to retrieve the resource. rdt_kill_sb()
will eventually make use of an arch 'reset everything' helper.
After the filesystem code is moved, rdtgroup_pseudo_locked_in_hierarchy()
remains part of the x86 specific hooks to support pseudo lock. This
code walks each domain, and still does this after the separate resources
are merged.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-7-james.morse@arm.com
The names of resources are used for the schema name presented to
user-space. The name used is rooted in a structure provided by the
architecture code because the names are different when CDP is enabled.
x86 implements this by swapping between two sets of resource structures
based on their alloc_enabled flag. The type of configuration in-use is
encoded in the name (and cbm_idx_offset).
Once the CDP behaviour is moved into the parts of resctrl that will
move to /fs/, there will be two struct resctrl_schema for one struct
rdt_resource. The schema describes the type of configuration being
applied to the resource. The name of the schema should be generated
by resctrl, base on the type of configuration. To do this struct
resctrl_schema needs to store the type of configuration in use for a
schema.
Create an enum resctrl_conf_type describing the options, and add it to
struct resctrl_schema. The underlying resources are still separate, as
cbm_idx_offset is still in use.
Temporarily label all the entries in rdt_resources_all[] and copy that
value to struct resctrl_schema. Copying the value ensures there is no
mismatch while the filesystem parts of resctrl are modified to use the
schema. Once the resources are merged, the filesystem code can assign
this value based on the schema being created.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-6-james.morse@arm.com
Many of resctrl's per-schema files return a value from struct
rdt_resource, which they take as their 'priv' pointer.
Moving properties that resctrl exposes to user-space into the core 'fs'
code, (e.g. the name of the schema), means some of the functions that
back the filesystem need the schema struct (to where the properties are
moved), but currently take struct rdt_resource. For example, once the
CDP resources are merged, struct rdt_resource no longer reflects all the
properties of the schema.
For the info dirs that represent a control, the information needed
will be accessed via struct resctrl_schema, as this is how the resource
is being used. For the monitors, its still struct rdt_resource as the
monitors aren't described as schema.
This difference means the type of the private pointers varies between
control and monitor info dirs.
Change the 'priv' pointer to point to struct resctrl_schema for
the per-schema files that represent a control. The type can be
determined from the fflags field. If the flags are RF_MON_INFO, its
a struct rdt_resource. If the flags are RF_CTRL_INFO, its a struct
resctrl_schema. No entry in res_common_files[] has both flags.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-5-james.morse@arm.com
Resctrl exposes schemata to user-space, which allow the control values
to be specified for a group of tasks.
User-visible properties of the interface, (such as the schemata names
and how the values are parsed) are rooted in a struct provided by the
architecture code. (struct rdt_hw_resource). Once a second architecture
uses resctrl, this would allow user-visible properties to diverge
between architectures.
These properties should come from the resctrl code that will be common
to all architectures. Resctrl has no per-schema structure, only struct
rdt_{hw_,}resource. Create a struct resctrl_schema to hold the
rdt_resource. Before a second architecture can be supported, this
structure will also need to hold the schema name visible to user-space
and the type of configuration values for resctrl.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-4-james.morse@arm.com
resctrl is the defacto Linux ABI for SoC resource partitioning features.
To support it on another architecture, it needs to be abstracted from
the features provided by Intel RDT and AMD PQoS, and moved to /fs/.
struct rdt_domain contains a mix of architecture private details and
properties of the filesystem interface user-space uses.
Continue by splitting struct rdt_domain, into an architecture private
'hw' struct, which contains the common resctrl structure that would be
used by any architecture. The hardware values in ctrl_val and mbps_val
need to be accessed via helpers to allow another architecture to convert
these into a different format if necessary. After this split, filesystem
code paths touching a 'hw' struct indicates where an abstraction is
needed.
Splitting this structure only moves types around, and should not lead
to any change in behaviour.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-3-james.morse@arm.com
resctrl is the defacto Linux ABI for SoC resource partitioning features.
To support it on another architecture, it needs to be abstracted from
the features provided by Intel RDT and AMD PQoS, and moved to /fs/.
struct rdt_resource contains a mix of architecture private details
and properties of the filesystem interface user-space uses.
Start by splitting struct rdt_resource, into an architecture private
'hw' struct, which contains the common resctrl structure that would be
used by any architecture. The foreach helpers are most commonly used by
the filesystem code, and should return the common resctrl structure.
for_each_rdt_resource() is changed to walk the common structure in its
parent arch private structure.
Move as much of the structure as possible into the common structure
in the core code's header file. The x86 hardware accessors remain
part of the architecture private code, as do num_closid, mon_scale
and mbm_width.
mon_scale and mbm_width are used to detect overflow of the hardware
counters, and convert them from their native size to bytes. Any
cross-architecture abstraction should be in terms of bytes, making
these properties private.
The hardware's num_closid is kept in the private structure to force the
filesystem code to use a helper to access it. MPAM would return a single
value for the system, regardless of the resource. Using the helper
prevents this field from being confused with the version of num_closid
that is being exposed to user-space (added in a later patch).
After this split, filesystem code touching a 'hw' struct indicates
where an abstraction is needed.
Splitting this structure only moves types around, and should not lead
to any change in behaviour.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-2-james.morse@arm.com
Pull timer fix from Thomas Gleixner:
"A single timer fix:
- Prevent a memory ordering issue in the timer expiry code which
makes it possible to observe falsely that the callback has been
executed already while that's not the case, which violates the
guarantee of del_timer_sync()"
* tag 'timers-urgent-2021-08-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timers: Move clearing of base::timer_running under base:: Lock
Pull scheduler fix from Thomas Gleixner:
"A single scheduler fix:
- Prevent a double enqueue caused by rt_effective_prio() being
invoked twice in __sched_setscheduler()"
* tag 'sched-urgent-2021-08-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/rt: Fix double enqueue caused by rt_effective_prio
Pull perf fixes from Thomas Gleixner:
"A set of perf fixes:
- Correct the permission checks for perf event which send SIGTRAP to
a different process and clean up that code to be more readable.
- Prevent an out of bound MSR access in the x86 perf code which
happened due to an incomplete limiting to the actually available
hardware counters.
- Prevent access to the AMD64_EVENTSEL_HOSTONLY bit when running
inside a guest.
- Handle small core counter re-enabling correctly by issuing an ACK
right before reenabling it to prevent a stale PEBS record being
kept around"
* tag 'perf-urgent-2021-08-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Apply mid ACK for small core
perf/x86/amd: Don't touch the AMD64_EVENTSEL_HOSTONLY bit inside the guest
perf/x86: Fix out of bound MSR access
perf: Refactor permissions check into perf_check_permission()
perf: Fix required permissions if sigtrap is requested
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc driver fixes for 5.14-rc5.
They resolve a few regressions that people reported:
- acrn driver fix
- fpga driver fix
- interconnect tiny driver fixes
All have been in linux-next for a while with no reported issues"
* tag 'char-misc-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
interconnect: Fix undersized devress_alloc allocation
interconnect: qcom: icc-rpmh: Add BCMs to commit list in pre_aggregate
interconnect: qcom: icc-rpmh: Ensure floor BW is enforced for all nodes
fpga: dfl: fme: Fix cpu hotplug issue in performance reporting
virt: acrn: Do hcall_destroy_vm() before resource release
interconnect: Always call pre_aggregate before aggregate
interconnect: Zero initial BW after sync-state
Pull driver core fixes from Greg KH:
"Here are three tiny driver core and firmware loader fixes for
5.14-rc5. They are:
- driver core fix for when probing fails
- firmware loader fixes for reported problems.
All have been in linux-next for a while with no reported issues"
* tag 'driver-core-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
firmware_loader: fix use-after-free in firmware_fallback_sysfs
firmware_loader: use -ETIMEDOUT instead of -EAGAIN in fw_load_sysfs_fallback
drivers core: Fix oops when driver probe fails
Pull staging driver fixes from Greg KH:
"Here are a few small staging driver fixes for 5.14-rc5 to resolve some
reported problems. They include:
- mt7621 driver fix
- rtl8723bs driver fixes
- rtl8712 driver fixes.
Nothing major, just small problems resolved.
All have been in linux-next for a while with no reported issues"
* tag 'staging-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: mt7621-pci: avoid to re-disable clock for those pcies not in use
staging: rtl8712: error handling refactoring
staging: rtl8712: get rid of flush_scheduled_work
staging: rtl8723bs: select CONFIG_CRYPTO_LIB_ARC4
staging: rtl8723bs: Fix a resource leak in sd_int_dpc
Pull tty/serial fixes from Greg KH:
"Here are some small tty/serial driver fixes for 5.14-rc5 to resolve a
number of reported problems.
They include:
- mips serial driver fixes
- 8250 driver fixes for reported problems
- fsl_lpuart driver fixes
- other tiny driver fixes
All have been in linux-next for a while with no reported problems"
* tag 'tty-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250_pci: Avoid irq sharing for MSI(-X) interrupts.
serial: 8250_mtk: fix uart corruption issue when rx power off
tty: serial: fsl_lpuart: fix the wrong return value in lpuart32_get_mctrl
serial: 8250_pci: Enumerate Elkhart Lake UARTs via dedicated driver
serial: 8250: fix handle_irq locking
serial: tegra: Only print FIFO error message when an error occurs
MIPS: Malta: Do not byte-swap accesses to the CBUS UART
serial: 8250: Mask out floating 16/32-bit bus bits
serial: max310x: Unprepare and disable clock in error path
Pull USB driver fixes from Greg KH:
"Here are some small USB driver fixes for 5.14-rc5. They resolve a
number of small reported issues, including:
- cdnsp driver fixes
- usb serial driver fixes and device id updates
- usb gadget hid fixes
- usb host driver fixes
- usb dwc3 driver fixes
- other usb gadget driver fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (21 commits)
usb: typec: tcpm: Keep other events when receiving FRS and Sourcing_vbus events
usb: dwc3: gadget: Avoid runtime resume if disabling pullup
usb: dwc3: gadget: Use list_replace_init() before traversing lists
USB: serial: ftdi_sio: add device ID for Auto-M3 OP-COM v2
USB: serial: pl2303: fix GT type detection
USB: serial: option: add Telit FD980 composition 0x1056
USB: serial: pl2303: fix HX type detection
USB: serial: ch341: fix character loss at high transfer rates
usb: cdnsp: Fix the IMAN_IE_SET and IMAN_IE_CLEAR macro
usb: cdnsp: Fixed issue with ZLP
usb: cdnsp: Fix incorrect supported maximum speed
usb: cdns3: Fixed incorrect gadget state
usb: gadget: f_hid: idle uses the highest byte for duration
Revert "thunderbolt: Hide authorized attribute if router does not support PCIe tunnels"
usb: otg-fsm: Fix hrtimer list corruption
usb: host: ohci-at91: suspend/resume ports after/before OHCI accesses
usb: musb: Fix suspend and resume issues for PHYs on I2C and SPI
usb: gadget: f_hid: added GET_IDLE and SET_IDLE handlers
usb: gadget: f_hid: fixed NULL pointer dereference
usb: gadget: remove leaked entry from udc driver list
...
Pull io_uring from Jens Axboe:
"A few io-wq related fixes:
- Fix potential nr_worker race and missing max_workers check from one
path (Hao)
- Fix race between worker exiting and new work queue (me)"
* tag 'io_uring-5.14-2021-08-07' of git://git.kernel.dk/linux-block:
io-wq: fix lack of acct->nr_workers < acct->max_workers judgement
io-wq: fix no lock protection of acct->nr_worker
io-wq: fix race between worker exiting and activating free worker
Pull block fixes from Jens Axboe:
"A few minor fixes:
- Fix ldm kernel-doc warning (Bart)
- Fix adding offset twice for DMA address in n64cart (Christoph)
- Fix use-after-free in dasd path handling (Stefan)
- Order kyber insert trace correctly (Vincent)
- raid1 errored write handling fix (Wei)
- Fix blk-iolatency queue get failure handling (Yu)"
* tag 'block-5.14-2021-08-07' of git://git.kernel.dk/linux-block:
kyber: make trace_block_rq call consistent with documentation
block/partitions/ldm.c: Fix a kernel-doc warning
blk-iolatency: error out if blk_get_queue() failed in iolatency_set_limit()
n64cart: fix the dma address in n64cart_do_bvec
s390/dasd: fix use after free in dasd path handling
md/raid10: properly indicate failure when ending a failed write request
Pull RISC-V fixes from Palmer Dabbelt:
- avoid dereferencing a null task pointer while walking the stack
- fix the memory size in the HiFive Unleashed device tree
- disable stack protectors when randstruct is enabled, which results in
non-deterministic offsets during module builds
- a pair of fixes to avoid relying on a constant physical memory base
for the non-XIP builds
* tag 'riscv-for-linus-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
Revert "riscv: Remove CONFIG_PHYS_RAM_BASE_FIXED"
riscv: Get rid of CONFIG_PHYS_RAM_BASE in kernel physical address conversion
riscv: Disable STACKPROTECTOR_PER_TASK if GCC_PLUGIN_RANDSTRUCT is enabled
riscv: dts: fix memory size for the SiFive HiFive Unmatched
riscv: stacktrace: Fix NULL pointer dereference
Pull Kbuild fixes from Masahiro Yamada:
- Correct the Extended Regular Expressions in tools
- Adjust scripts/checkversion.pl for the current Kbuild
- Unset sub_make_done for 'make install' to make DKMS work again
* tag 'kbuild-fixes-v5.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: cancel sub_make_done for the install target to fix DKMS
scripts: checkversion: modernize linux/version.h search strings
mips: Fix non-POSIX regexp
x86/tools/relocs: Fix non-POSIX regexp
This reverts commit 9b79878ced.
The removal of this config exposes CONFIG_PHYS_RAM_BASE for all kernel
types: this value being implementation-specific, this breaks the
genericity of the RISC-V kernel so revert it.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Tested-by: Emil Renner Berthing <kernel@esmil.dk>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The usage of CONFIG_PHYS_RAM_BASE for all kernel types was a mistake:
this value is implementation-specific and this breaks the genericity of
the RISC-V kernel.
Fix this by introducing a new variable phys_ram_base that holds this
value at runtime and use it in the kernel physical address conversion
macro. Since this value is used only for XIP kernels, evaluate it only if
CONFIG_XIP_KERNEL is set which in addition optimizes this macro for
standard kernels at compile-time.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Tested-by: Emil Renner Berthing <kernel@esmil.dk>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Fixes: 44c9225729 ("RISC-V: enable XIP")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The kyber ioscheduler calls trace_block_rq_insert() *after* the request
is added to the queue but the documentation for trace_block_rq_insert()
says that the call should be made *before* the request is added to the
queue. Move the tracepoint for the kyber ioscheduler so that it is
consistent with the documentation.
Signed-off-by: Vincent Fu <vincent.fu@samsung.com>
Link: https://lore.kernel.org/r/20210804194913.10497-1-vincent.fu@samsung.com
Reviewed by: Adam Manzanares <a.manzanares@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull ext4 fixes from Ted Ts'o:
"A regression fix, bug fix, and a comment cleanup for ext4"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix potential htree corruption when growing large_dir directories
ext4: remove conflicting comment from __ext4_forget
ext4: fix potential uninitialized access to retval in kmmpd
Pull tracing fixes from Steven Rostedt:
"Fix tracepoint race between static_call and callback data
As callbacks to a tracepoint are paired with the data that is passed
in when the callback is registered to the tracepoint, it must have
that data passed to the callback when the tracepoint is triggered,
else bad things will happen. To keep the two together, they are both
assigned to a tracepoint structure and added to an array. The
tracepoint call site will dereference the structure (via RCU) and call
the callback in that structure along with the data in that structure.
This keeps the callback and data tightly coupled.
Because of the overhead that retpolines have on tracepoint callbacks,
if there's only one callback attached to a tracepoint (a common case),
then it is called via a static call (code modified to do a direct call
instead of an indirect call). But to implement this, the data had to
be decoupled from the callback, as now the callback is implemented via
a direct call from the static call and not an indirect call from the
dereferenced structure.
Note, the static call only calls a callback used when there's a single
callback attached to the tracepoint. If more than one callback is
attached to the same tracepoint, then the static call will call an
iterator function that goes back to dereferencing the structure
keeping the callback and its data tightly coupled again.
Issues can arise when going from 0 callbacks to one, as the static
call is assigned to the callback, and it must take care that the data
passed to it is loaded before the static call calls the callback.
Going from 1 to 2 callbacks is not an issue, as long as the static
call is updated to the iterator before the tracepoint structure array
is updated via RCU. Going from 2 to more or back down to 2 is not an
issue as the iterator can handle all theses cases. But going from 2 to
1, care must be taken as the static call is now calling a callback and
the data that is loaded must be the data for that callback.
Care was taken to ensure the callback and data would be in-sync, but
after a bug was reported, it became clear that not enough was done to
make sure that was the case. These changes address this.
The first change is to compare the old and new data instead of the old
and new callback, as it's the data that can corrupt the callback, even
if the callback is the same (something getting freed).
The next change is to convert these transitions into states, to make
it easier to know when a synchronization is needed, and to perform
those synchronizations. The problem with this patch is that it slows
down disabling all events from under a second, to making it take over
10 seconds to do the same work. But that is addressed in the final
patch.
The final patch uses the RCU state functions to keep track of the RCU
state between the transitions, and only needs to perform the
synchronization if an RCU synchronization hasn't been done already.
This brings the performance of disabling all events back to its
original value. That's because no synchronization is required between
disabling tracepoints but is required when enabling a tracepoint after
its been disabled. If an RCU synchronization happens after the
tracepoint is disabled, and before it is re-enabled, there's no need
to do the synchronization again.
Both the second and third patch have subtle complexities that they are
separated into two patches. But because the second patch causes such a
regression in performance, the third patch adds a "Fixes" tag to the
second patch, such that the two must be backported together and not
just the second patch"
* tag 'trace-v5.14-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracepoint: Use rcu get state and cond sync for static call updates
tracepoint: Fix static call function vs data state mismatch
tracepoint: static call: Compare data on transition from 2->1 callees
Pull power management fixes from Rafael Wysocki:
"Fix a recent regression in the timer events oriented (TEO) cpuidle
governor causing it to misbehave when idle state 0 is disabled and
rename two local variables for improved clarity on top of that"
* tag 'pm-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpuidle: teo: Rename two local variables in teo_select()
cpuidle: teo: Fix alternative idle state lookup
Pull ACPI fix from Rafael Wysocki:
"Revert a recent ACPICA commit causing boot issues to appear on some
systems"
* tag 'acpi-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "ACPICA: Fix memory leak caused by _CID repair function"
Pull ARM SoC fixes from Arnd Bergmann:
"Lots of small fixes for Arm SoCs this time, nothing too worrying:
- omap/beaglebone boot regression fix in gpt12 timer
- revert for i.mx8 soc driver breaking as a platform_driver
- kexec/kdump fixes for op-tee
- various fixes for incorrect DT settings on imx, mvebu, omap, stm32,
and tegra causing problems.
- device tree fixes for static checks in nomadik, versatile, stm32
- code fixes for issues found in build testing and with static
checking on tegra, ixp4xx, imx, omap"
* tag 'soc-fixes-5.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (36 commits)
soc: ixp4xx/qmgr: fix invalid __iomem access
soc: ixp4xx: fix printing resources
ARM: ixp4xx: goramo_mlr depends on old PCI driver
ARM: ixp4xx: fix compile-testing soc drivers
soc/tegra: Make regulator couplers depend on CONFIG_REGULATOR
ARM: dts: nomadik: Fix up interrupt controller node names
ARM: dts: stm32: Fix touchscreen IRQ line assignment on DHCOM
ARM: dts: stm32: Disable LAN8710 EDPD on DHCOM
ARM: dts: stm32: Prefer HW RTC on DHCOM SoM
omap5-board-common: remove not physically existing vdds_1v8_main fixed-regulator
ARM: dts: am437x-l4: fix typo in can@0 node
ARM: dts: am43x-epos-evm: Reduce i2c0 bus speed for tps65218
bus: ti-sysc: AM3: RNG is GP only
ARM: omap2+: hwmod: fix potential NULL pointer access
arm64: dts: armada-3720-turris-mox: remove mrvl,i2c-fast-mode
arm64: dts: armada-3720-turris-mox: fixed indices for the SDHC controllers
ARM: dts: imx: Swap M53Menlo pinctrl_power_button/pinctrl_power_out pins
ARM: imx: fix missing 3rd argument in macro imx_mmdc_perf_init
ARM: dts: colibri-imx6ull: limit SDIO clock to 25MHz
arm64: dts: ls1028: sl28: fix networking for variant 2
...
Pull arm64 fixes from Will Deacon:
"It's all pretty minor but the main fix is sorting out how we deal with
return values from 32-bit system calls as audit expects error codes to
be sign-extended to 64 bits
Summary:
- Fix extension/truncation of return values from 32-bit system calls
- Fix interaction between unwinding and tracing
- Fix spurious toolchain warning emitted during make
- Fix Kconfig help text for RANDOMIZE_MODULE_REGION_FULL"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: stacktrace: avoid tracing arch_stack_walk()
arm64: stacktrace: fix comment
arm64: fix the doc of RANDOMIZE_MODULE_REGION_FULL
arm64: move warning about toolchains to archprepare
arm64: fix compat syscall return truncation
Pull MIPS fix from Thomas Bogendoerfer:
"Fix PMD accounting change"
* tag 'mips-fixes_5.14_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: check return value of pgtable_pmd_page_ctor
Pull spi fixes from Mark Brown:
"A small collection of fixes for SPI, small mostly driver specific
things plus a fix for module autoloading which hadn't been working
properly for DT systems"
* tag 'spi-fix-v5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: cadence-quadspi: Fix check condition for DTR ops
spi: mediatek: Fix fifo transfer
spi: imx: mx51-ecspi: Fix CONFIGREG delay comment
spi: imx: mx51-ecspi: Fix low-speed CONFIGREG delay calculation
spi: update modalias_show after of_device_uevent_modalias support
spi: meson-spicc: fix memory leak in meson_spicc_remove
spi: spi-mux: Add module info needed for autoloading
Pull dmaengine fixes from Vinod Koul:
"A bunch of driver fixes, notably:
- idxd driver fixes for submission race, driver remove sequence,
setup sequence for MSIXPERM, array index and updating descriptor
vector
- usb-dmac, pm reference leak fix
- xilinx_dma, read-after-free fix
- uniphier-xdmac fix for using atomic readl_poll_timeout_atomic()
- of-dma, router_xlate to return
- imx-dma, generic dma fix"
* tag 'dmaengine-fix-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: imx-dma: configure the generic DMA type to make it work
dmaengine: of-dma: router_xlate to return -EPROBE_DEFER if controller is not yet available
dmaengine: stm32-dmamux: Fix PM usage counter unbalance in stm32 dmamux ops
dmaengine: stm32-dma: Fix PM usage counter imbalance in stm32 dma ops
dmaengine: uniphier-xdmac: Use readl_poll_timeout_atomic() in atomic state
dmaengine: idxd: fix submission race window
dmaengine: idxd: fix sequence for pci driver remove() and shutdown()
dmaengine: idxd: fix desc->vector that isn't being updated
dmaengine: idxd: fix setup sequence for MSIXPERM table
dmaengine: idxd: fix array index when int_handles are being used
dmaengine: usb-dmac: Fix PM reference leak in usb_dmac_probe()
dmaengine: xilinx_dma: Fix read-after-free bug when terminating transfers
