[ Upstream commit 0792c1984a45ccd7a296d6b8cb78088bc99a212e ]
Rework the power management in inv_icm42600_core_probe() to use
devm_pm_runtime_set_active_enabled(), which simplifies the runtime PM
setup by handling activation and enabling in one step.
Remove the separate inv_icm42600_disable_pm callback, as it's no longer
needed with the devm-managed approach.
Using devm_pm_runtime_enable() also fixes the missing disable of
autosuspend.
Update inv_icm42600_disable_vddio_reg() to only disable the regulator if
the device is not suspended i.e. powered-down, preventing unbalanced
disables.
Also remove redundant error msg on regulator_disable(), the regulator
framework already emits an error message when regulator_disable() fails.
This simplifies the PM setup and avoids manipulating the usage counter
unnecessarily.
Fixes: 31c24c1e93 ("iio: imu: inv_icm42600: add core of new inv_icm42600 driver")
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Link: https://patch.msgid.link/20250901-icm42pmreg-v3-1-ef1336246960@geanix.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e747883c7d7306acb4d683038d881528fbfbe749 ]
When mounting file systems with a log that was dirtied on i386 on
other architectures or vice versa, log recovery is unhappy:
[ 11.068052] XFS (vdb): Torn write (CRC failure) detected at log block 0x2. Truncating head block from 0xc.
This is because the CRCs generated by i386 and other architectures
always diff. The reason for that is that sizeof(struct xlog_rec_header)
returns different values for i386 vs the rest (324 vs 328), because the
struct is not sizeof(uint64_t) aligned, and i386 has odd struct size
alignment rules.
This issue goes back to commit 13cdc853c519 ("Add log versioning, and new
super block field for the log stripe") in the xfs-import tree, which
adds log v2 support and the h_size field that causes the unaligned size.
At that time it only mattered for the crude debug only log header
checksum, but with commit 0e446be448 ("xfs: add CRC checks to the log")
it became a real issue for v5 file system, because now there is a proper
CRC, and regular builds actually expect it match.
Fix this by allowing checksums with and without the padding.
Fixes: 0e446be448 ("xfs: add CRC checks to the log")
Cc: <stable@vger.kernel.org> # v3.8
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0b737f4ac1d3ec093347241df74bbf5f54a7e16c ]
old_crc is a very misleading name. Rename it to expected_crc as that
described the usage much better.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Stable-dep-of: e747883c7d73 ("xfs: fix log CRC mismatches between i386 and other architectures")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d68886bae76a4b9b3484d23e5b7df086f940fa38 ]
The data type of loca_last_write_offset is newoffset4 and is switched
on a boolean value, no_newoffset, that indicates if a previous write
occurred or not. If no_newoffset is FALSE, an offset is not given.
This means that client does not try to update the file size. Thus,
server should not try to calculate new file size and check if it fits
into the segment range. See RFC 8881, section 12.5.4.2.
Sometimes the current incorrect logic may cause clients to hang when
trying to sync an inode. If layoutcommit fails, the client marks the
inode as dirty again.
Fixes: 9cf514ccfa ("nfsd: implement pNFS operations")
Cc: stable@vger.kernel.org
Co-developed-by: Konstantin Evtushenko <koevtushenko@yandex.com>
Signed-off-by: Konstantin Evtushenko <koevtushenko@yandex.com>
Signed-off-by: Sergey Bashirov <sergeybashirov@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
[ removed rqstp parameter from proc_layoutcommit ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 274365a51d88658fb51cca637ba579034e90a799 ]
Remove dprintk in nfsd4_layoutcommit. These are not needed
in day to day usage, and the information is also available
in Wireshark when capturing NFS traffic.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sergey Bashirov <sergeybashirov@gmail.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Stable-dep-of: d68886bae76a ("NFSD: Fix last write offset handling in layoutcommit")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 832738e4b325b742940761e10487403f9aad13e8 ]
Compilers may optimize the layout of C structures, so we should not rely
on sizeof struct and memcpy to encode and decode XDR structures. The byte
order of the fields should also be taken into account.
This patch adds the correct functions to handle the deviceid4 structure
and removes the pad field, which is currently not used by NFSD, from the
runtime state. The server's byte order is preserved because the deviceid4
blob on the wire is only used as a cookie by the client.
Signed-off-by: Sergey Bashirov <sergeybashirov@gmail.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Stable-dep-of: d68886bae76a ("NFSD: Fix last write offset handling in layoutcommit")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fb881cd7604536b17a1927fb0533f9a6982ffcc5 upstream.
After commit c0e473a0d226 ("block: fix race between set_blocksize and read
paths") was merged, set_blocksize() called by sb_set_blocksize() now locks
the inode of the backing device file. As a result of this change, syzbot
started reporting deadlock warnings due to a circular dependency involving
the semaphore "ns_sem" of the nilfs object, the inode lock of the backing
device file, and the locks that this inode lock is transitively dependent
on.
This is caused by a new lock dependency added by the above change, since
init_nilfs() calls sb_set_blocksize() in the lock section of "ns_sem".
However, these warnings are false positives because init_nilfs() is called
in the early stage of the mount operation and the filesystem has not yet
started.
The reason why "ns_sem" is locked in init_nilfs() was to avoid a race
condition in nilfs_fill_super() caused by sharing a nilfs object among
multiple filesystem instances (super block structures) in the early
implementation. However, nilfs objects and super block structures have
long ago become one-to-one, and there is no longer any need to use the
semaphore there.
So, fix this issue by removing the use of the semaphore "ns_sem" in
init_nilfs().
Link: https://lkml.kernel.org/r/20250503053327.12294-1-konishi.ryusuke@gmail.com
Fixes: c0e473a0d226 ("block: fix race between set_blocksize and read paths")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+00f7f5b884b117ee6773@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=00f7f5b884b117ee6773
Tested-by: syzbot+00f7f5b884b117ee6773@syzkaller.appspotmail.com
Reported-by: syzbot+f30591e72bfc24d4715b@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=f30591e72bfc24d4715b
Tested-by: syzbot+f30591e72bfc24d4715b@syzkaller.appspotmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mahmoud Adam <mngyadam@amazon.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c0e473a0d226479e8e925d5ba93f751d8df628e9 upstream.
With the new large sector size support, it's now the case that
set_blocksize can change i_blksize and the folio order in a manner that
conflicts with a concurrent reader and causes a kernel crash.
Specifically, let's say that udev-worker calls libblkid to detect the
labels on a block device. The read call can create an order-0 folio to
read the first 4096 bytes from the disk. But then udev is preempted.
Next, someone tries to mount an 8k-sectorsize filesystem from the same
block device. The filesystem calls set_blksize, which sets i_blksize to
8192 and the minimum folio order to 1.
Now udev resumes, still holding the order-0 folio it allocated. It then
tries to schedule a read bio and do_mpage_readahead tries to create
bufferheads for the folio. Unfortunately, blocks_per_folio == 0 because
the page size is 4096 but the blocksize is 8192 so no bufferheads are
attached and the bh walk never sets bdev. We then submit the bio with a
NULL block device and crash.
Therefore, truncate the page cache after flushing but before updating
i_blksize. However, that's not enough -- we also need to lock out file
IO and page faults during the update. Take both the i_rwsem and the
invalidate_lock in exclusive mode for invalidations, and in shared mode
for read/write operations.
I don't know if this is the correct fix, but xfs/259 found it.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/r/174543795699.4139148.2086129139322431423.stgit@frogsfrogsfrogs
Signed-off-by: Jens Axboe <axboe@kernel.dk>
[ use bdev->bd_inode instead ]
Signed-off-by: Mahmoud Adam <mngyadam@amazon.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0c1999ed33722f85476a248186d6e0eb2bf3dd2a ]
test_parse_test_list_file writes some data to
/tmp/bpf_arg_parsing_test.XXXXXX and parse_test_list_file() will read
the data back. However, after writing data to that file, we forget to
call fsync() and it's causing testing failure in my laptop. This patch
helps fix it by adding the missing fsync() call.
Fixes: 64276f01dc ("selftests/bpf: Test_progs can read test lists from file")
Signed-off-by: Xing Guo <higuoxing@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20251016035330.3217145-1-higuoxing@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aa4daea418ee4215dca5c8636090660c545cb233 ]
HID_DG_PEN devices should have a suffix of "Stylus", as pointed out by
commit c0ee1d5716 ("HID: hid-input: Add suffix also for HID_DG_PEN").
However, on multitouch devices, these suffixes may be overridden. Before
that commit, HID_DG_PEN devices would get the "Stylus" suffix, but after
that, multitouch would override them to have an "UNKNOWN" suffix. Just add
HID_DG_PEN to the list of non-overriden suffixes in multitouch.
Before this fix:
[ 0.470981] input: ELAN9008:00 04F3:2E14 UNKNOWN as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-16/i2c-ELAN9008:00/0018:04F3:2E14.0001/input/input8
ELAN9008:00 04F3:2E14 UNKNOWN
After this fix:
[ 0.474332] input: ELAN9008:00 04F3:2E14 Stylus as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-16/i2c-ELAN9008:00/0018:04F3:2E14.0001/input/input8
ELAN9008:00 04F3:2E14 Stylus
Fixes: c0ee1d5716 ("HID: hid-input: Add suffix also for HID_DG_PEN")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0187c08058da3e7f11b356ac27e0c427d36f33f2 ]
Commit 581c448476 ("HID: input: map digitizer battery usage") added
handling of battery events for digitizers (typically for batteries
presented in stylii). Digitizers typically report correct battery levels
only when stylus is actively touching the surface, and in other cases
they may report battery level of 0. To avoid confusing consumers of the
battery information the code was added to filer out reports with 0
battery levels.
However there exist other kinds of devices that may legitimately report
0 battery levels. Fix this by filtering out 0-level reports only for
digitizer usages, and continue reporting them for other kinds of devices
(Smart Batteries, etc).
Reported-by: 卢国宏 <luguohong@xiaomi.com>
Fixes: 581c448476 ("HID: input: map digitizer battery usage")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 28412b489b088fb88dff488305fd4e56bd47f6e4 ]
In try_to_register_card(), the return value of usb_ifnum_to_if() is
passed directly to usb_interface_claimed() without a NULL check, which
will lead to a NULL pointer dereference when creating an invalid
USB audio device. Fix this by adding a check to ensure the interface
pointer is valid before passing it to usb_interface_claimed().
Fixes: 39efc9c8a9 ("ALSA: usb-audio: Fix last interface check for registration")
Closes: https://lore.kernel.org/all/CANypQFYtQxHL5ghREs-BujZG413RPJGnO5TH=xjFBKpPts33tA@mail.gmail.com/
Signed-off-by: Jiaming Zhang <r772577952@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e603a342cf7ecd64ef8f36207dfe1caacb9e2583 ]
We started getting a crash in BPF CI, which seems to originate from
test_parse_test_list_file() test and is happening at this line:
ASSERT_OK(strcmp("test_with_spaces", set.tests[0].name), "test 0 name");
One way we can crash there is if set.cnt zero, which is checked for with
ASSERT_EQ() above, but we proceed after this regardless of the outcome.
Instead of crashing, we should bail out with test failure early.
Similarly, if parse_test_list_file() fails, we shouldn't be even looking
at set, so bail even earlier if ASSERT_OK() fails.
Fixes: 64276f01dc ("selftests/bpf: Test_progs can read test lists from file")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20251014202037.72922-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 11f08c30a3e4157305ba692f1d44cca5fc9a8fca ]
Currently, if find_and_map_user_pages() takes a DMA xfer request from the
user with a length field set to 0, or in a rare case, the host receives
QAIC_TRANS_DMA_XFER_CONT from the device where resources->xferred_dma_size
is equal to the requested transaction size, the function will return 0
before allocating an sgt or setting the fields of the dma_xfer struct.
In that case, encode_addr_size_pairs() will try to access the sgt which
will lead to a general protection fault.
Return an EINVAL in case the user provides a zero-sized ALP, or the device
requests continuation after all of the bytes have been transferred.
Fixes: 96d3c1cade ("accel/qaic: Clean up integer overflow checking in map_user_pages()")
Signed-off-by: Youssef Samir <quic_yabdulra@quicinc.com>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Reviewed-by: Carl Vanderlip <carl.vanderlip@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251007122320.339654-1-youssef.abdulrahman@oss.qualcomm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 17e3e88ed0b6318fde0d1c14df1a804711cab1b5 ]
The check for some lost idle pelt time should be always done when
pick_next_task_fair() fails to pick a task and not only when we call it
from the fair fast-path.
The case happens when the last running task on rq is a RT or DL task. When
the latter goes to sleep and the /Sum of util_sum of the rq is at the max
value, we don't account the lost of idle time whereas we should.
Fixes: 67692435c4 ("sched: Rework pick_next_task() slow-path")
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f38a1487555604bc4e210fa7cc9b1bce981c40e ]
The vop2_plane_atomic_check() function incorrectly checks
drm_rect_width(dest) twice instead of verifying both width and height.
Fix the second condition to use drm_rect_height(dest) so that invalid
destination rectangles with height < 4 are correctly rejected.
Fixes: 604be85547 ("drm/rockchip: Add VOP2 driver")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20251012142005.660727-1-alok.a.tiwari@oracle.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6917112af2ba36c5f19075eb9f2933ffd07e55bf ]
Remove extra multiplication.
CIK GPUs such as Hawaii appear to use PP_TABLE_V0 in which case
the shutdown temperature is hardcoded in smu7_init_dpm_defaults
and is already multiplied by 1000. The value was mistakenly
multiplied another time by smu7_get_thermal_temperature_range.
Fixes: 4ba082572a ("drm/amd/powerplay: export the thermal ranges of VI asics (V2)")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/1676
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2b4eda7bf7d8a4e2f7575a98f55d8336dec0f302 ]
Stress testing the audio jack hotplug handling on a few Steam Deck units
revealed that the debounce circuit is responsible for having a negative
impact on the detection reliability, e.g. in some cases the ejection
interrupt is not fired, while in other instances it goes into a kind of
invalid state and generates a flood of misleading interrupts.
Add new entries to the DMI table introduced via commit 1bc40efdaf
("ASoC: nau8821: Add DMI quirk mechanism for active-high jack-detect")
and extend the quirk logic to allow bypassing the debounce circuit used
for jack detection on Valve Steam Deck LCD and OLED models.
While at it, rename existing NAU8821_JD_ACTIVE_HIGH quirk bitfield to
NAU8821_QUIRK_JD_ACTIVE_HIGH. This should help improve code readability
by differentiating from similarly named register bits.
Fixes: aab1ad11d6 ("ASoC: nau8821: new driver")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20251003-nau8821-jdet-fixes-v1-4-f7b0e2543f09@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9273aa85b35cc02d0953a1ba3b7bd694e5a2c10e ]
Instead of adding yet another utility function for dealing with the
interrupt clearing register, generalize nau8821_int_status_clear_all()
by renaming it to nau8821_irq_status_clear(), whilst introducing a
second parameter to allow restricting the operation scope to a single
interrupt instead of the whole range of active IRQs.
While at it, also fix a spelling typo in the comment block.
Note this is mainly a prerequisite for subsequent patches aiming to
address some deficiencies in the implementation of the interrupt
handler. Thus the presence of the Fixes tag below is intentional, to
facilitate backporting.
Fixes: aab1ad11d6 ("ASoC: nau8821: new driver")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20251003-nau8821-jdet-fixes-v1-2-f7b0e2543f09@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6e54919cb541fdf1063b16f3254c28d01bc9e5ff ]
The microphone detection work scheduled by a prior jack insertion
interrupt may still be in a pending state or under execution when a jack
ejection interrupt has been fired.
This might lead to a racing condition or nau8821_jdet_work() completing
after nau8821_eject_jack(), which will override the currently
disconnected state of the jack and incorrectly report the headphone or
the headset as being connected.
Cancel any pending jdet_work or wait for its execution to finish before
attempting to handle the ejection interrupt.
Proceed similarly before launching the eject handler as a consequence of
detecting an invalid insert interrupt.
Fixes: aab1ad11d6 ("ASoC: nau8821: new driver")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20251003-nau8821-jdet-fixes-v1-1-f7b0e2543f09@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6370a996f308ea3276030769b7482b346e7cc7c1 ]
The gain ranges specified in Renesas IDT821034 codec documentation
are [-3dB;+13dB] in the transmit path (ADC) and [-13dB;+3dB] in the
receive path (DAC). Allthough the registers allow programming values
outside those ranges, the signal S/N and distorsion are only
guaranteed in the specified ranges.
Set ranges to the specified ones.
Fixes: e51166990e ("ASoC: codecs: Add support for the Renesas IDT821034 codec")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://patch.msgid.link/2bd547194f3398e6182f770d7d6be711c702b4b2.1760029099.git.christophe.leroy@csgroup.eu
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit db74b04edce1bc86b9a5acc724c7ca06f427ab60 ]
There is now a new LT9211 rev. U5, which reports chip ID 0x18 0x01 0xe4 .
The previous LT9211 reported chip ID 0x18 0x01 0xe3 , which is what the
driver checks for right now. Since there is a possibility there will be
yet another revision of the LT9211 in the future, drop the last version
nibble check to allow all future revisions of the chip to work with this
driver.
This fix makes LT9211 rev. U5 work with this driver.
Fixes: 8ce4129e3d ("drm/bridge: lt9211: Add Lontium LT9211 bridge driver")
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251011110017.12521-1-marek.vasut@mailbox.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9e68bd803fac49274fde914466fd3b07c4d602c8 ]
When adding a kprobe such as "p:probe/tcp_sendmsg _text+15392192",
arch_check_kprobe would start iterating all instructions starting from
_text until the probed address. Not only is this very inefficient, but
literal values in there (e.g. left by function patching) are
misinterpreted in a way that causes a desync.
Fix this by doing it like x86: start the iteration at the closest
preceding symbol instead of the given starting point.
Fixes: 87f48c7ccc ("riscv: kprobe: Fixup kernel panic when probing an illegal position")
Signed-off-by: Fabian Vogt <fvogt@suse.de>
Signed-off-by: Marvin Friedrich <marvin.friedrich@suse.com>
Acked-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/6191817.lOV4Wx5bFT@fvogt-thinkpad
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb642e2d300ee27dcede65cda7ffc47a7047bd69 ]
For queue-depth I/O policy, this patch fixes unbalanced I/Os across
nvme multipaths.
Issue Description:
The RETRY disposition incorrectly increments ns->ctrl->nr_active
counter and reinitializes iostat start-time. In such cases nr_active
counter never goes back to zero until that path disconnects and
reconnects.
Such a path is not chosen for new I/Os if multiple RETRY cases on a given
a path cause its queue-depth counter to be artificially higher compared
to other paths. This leads to unbalanced I/Os across paths.
The patch skips incrementing nr_active if NVME_MPATH_CNT_ACTIVE is already
set. And it skips restarting io stats if NVME_MPATH_IO_STATS is already set.
base-commit: e989a3da2d371a4b6597ee8dee5c72e407b4db7a
Fixes: d4d957b53d ("nvme-multipath: support io stats on the mpath device")
Signed-off-by: Amit Chaudhary <achaudhary@purestorage.com>
Reviewed-by: Randy Jennings <randyj@purestorage.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8d93ff40d49d70e05c82a74beae31f883fe0eaf8 ]
dev->chipid is used in lan78xx_init_mac_address before it's initialized:
lan78xx_reset() {
lan78xx_init_mac_address()
lan78xx_read_eeprom()
lan78xx_read_raw_eeprom() <- dev->chipid is used here
dev->chipid = ... <- dev->chipid is initialized correctly here
}
Reorder initialization so that dev->chipid is set before calling
lan78xx_init_mac_address().
Fixes: a0db7d10b7 ("lan78xx: Add to handle mux control per chip id")
Signed-off-by: I Viswanath <viswanathiyyappan@gmail.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Khalid Aziz <khalid@kernel.org>
Link: https://patch.msgid.link/20251013181648.35153-1-viswanathiyyappan@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6f31135894ec96481e2bda93a1da70712f5e57c1 ]
Convert `lan78xx_init_mac_address` to return error codes and handle
failures in register read and write operations. Update `lan78xx_reset`
to check for errors during MAC address initialization and propagate them
appropriately.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241209130751.703182-3-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 8d93ff40d49d ("net: usb: lan78xx: fix use of improperly initialized dev->chipid in lan78xx_reset")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f846c65ca11e63d2409868ff039081f80e42ae4 ]
With async crypto, we rely on tx_work to actually transmit records
once encryption completes. But while send() is running, both the
tx_lock and socket lock are held, so tx_work_handler cannot process
the queue of encrypted records, and simply reschedules itself. During
a large send(), this could last a long time, and use a lot of memory.
Transmit any pending encrypted records before restarting the main
loop of tls_sw_sendmsg_locked.
Fixes: a42055e8d2 ("net/tls: Add support for async encryption of records for performance")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/8396631478f70454b44afb98352237d33f48d34d.1760432043.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b8a6ff84abbcbbc445463de58704686011edc8e1 ]
Async decryption calls tls_strp_msg_hold to create a clone of the
input skb to hold references to the memory it uses. If we fail to
allocate that clone, proceeding with async decryption can lead to
various issues (UAF on the skb, writing into userspace memory after
the recv() call has returned).
In this case, wait for all pending decryption requests.
Fixes: 84c61fe1a7 ("tls: rx: do not use the standard strparser")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/b9fe61dcc07dab15da9b35cf4c7d86382a98caf2.1760432043.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b6fe4c29bb51cf239ecf48eacf72b924565cb619 ]
When userspace wants to send a non-DATA record (via the
TLS_SET_RECORD_TYPE cmsg), we need to send any pending data from a
previous MSG_MORE send() as a separate DATA record. If that DATA record
is encrypted asynchronously, tls_handle_open_record will return
-EINPROGRESS. This is currently treated as an error by
tls_process_cmsg, and it will skip setting record_type to the correct
value, but the caller (tls_sw_sendmsg_locked) handles that return
value correctly and proceeds with sending the new message with an
incorrect record_type (DATA instead of whatever was requested in the
cmsg).
Always set record_type before handling the open record. If
tls_handle_open_record returns an error, record_type will be
ignored. If it succeeds, whether with synchronous crypto (returning 0)
or asynchronous (returning -EINPROGRESS), the caller will proceed
correctly.
Fixes: a42055e8d2 ("net/tls: Add support for async encryption of records for performance")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/0457252e578a10a94e40c72ba6288b3a64f31662.1760432043.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b014a4e066c555185b7c367efacdc33f16695495 ]
If we hit an error during the main loop of tls_sw_sendmsg_locked (eg
failed allocation), we jump to send_end and immediately
return. Previous iterations may have queued async encryption requests
that are still pending. We should wait for those before returning, as
we could otherwise be reading from memory that userspace believes
we're not using anymore, which would be a sort of use-after-free.
This is similar to what tls_sw_recvmsg already does: failures during
the main loop jump to the "wait for async" code, not straight to the
unlock/return.
Fixes: a42055e8d2 ("net/tls: Add support for async encryption of records for performance")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/c793efe9673b87f808d84fdefc0f732217030c52.1760432043.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 54001d0f2fdbc7852136a00f3e6fc395a9547ae5 ]
When asynchronous encryption is used KTLS sends out the final data at
proto->close time. This becomes problematic when the task calling
close() receives a signal. In this case it can happen that
tcp_sendmsg_locked() called at close time returns -ERESTARTSYS and the
final data is not sent.
The described situation happens when KTLS is used in conjunction with
io_uring, as io_uring uses task_work_add() to add work to the current
userspace task. A discussion of the problem along with a reproducer can
be found in [1] and [2]
Fix this by waiting for the asynchronous encryption to be completed on
the final message. With this there is no data left to be sent at close
time.
[1] https://lore.kernel.org/all/20231010141932.GD3114228@pengutronix.de/
[2] https://lore.kernel.org/all/20240315100159.3898944-1-s.hauer@pengutronix.de/
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://patch.msgid.link/20240904-ktls-wait-async-v1-1-a62892833110@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: b014a4e066c5 ("tls: wait for async encrypt in case of error during latter iterations of sendmsg")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ce5af41e3234425a40974696682163edfd21128c ]
During tls_sw_sendmsg_locked, we pre-allocate the encrypted message
for the size we're expecting to send during the current iteration, but
we may end up sending less, for example when splicing: if we're
getting the data from small fragments of memory, we may fill up all
the slots in the skmsg with less data than expected.
In this case, we need to trim the encrypted message to only the length
we actually need, to avoid pushing uninitialized bytes down the
underlying TCP socket.
Fixes: fe1e81d4f7 ("tls/sw: Support MSG_SPLICE_PAGES")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/66a0ae99c9efc15f88e9e56c1f58f902f442ce86.1760432043.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 295ce1eb36ae47dc862d6c8a1012618a25516208 ]
Neal reported that using neper tcp_stream with TCP_TX_DELAY
set to 50ms would often lead to flows stuck in a small cwnd mode,
regardless of the congestion control.
While tcp_stream sets TCP_TX_DELAY too late after the connect(),
it highlighted two kernel bugs.
The following heuristic in tcp_tso_should_defer() seems wrong
for large RTT:
delta = tp->tcp_clock_cache - head->tstamp;
/* If next ACK is likely to come too late (half srtt), do not defer */
if ((s64)(delta - (u64)NSEC_PER_USEC * (tp->srtt_us >> 4)) < 0)
goto send_now;
If next ACK is expected to come in more than 1 ms, we should
not defer because we prefer a smooth ACK clocking.
While blamed commit was a step in the good direction, it was not
generic enough.
Another patch fixing TCP_TX_DELAY for established flows
will be proposed when net-next reopens.
Fixes: 50c8339e92 ("tcp: tso: restore IW10 after TSO autosizing")
Reported-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Tested-by: Neal Cardwell <ncardwell@google.com>
Link: https://patch.msgid.link/20251011115742.1245771-1-edumazet@google.com
[pabeni@redhat.com: fixed whitespace issue]
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2616222e423398bb374ffcb5d23dea4ba2c3e524 ]
During interface toggle operations (ifdown/ifup), the driver currently
resets the local helper variable 'phy_link' to -1. This causes the link
state machine to incorrectly interpret the state as a link change event,
resulting in spurious "Link is down" messages being logged when the
interface is brought back up.
Preserve the phy_link state across interface toggles to avoid treating
the -1 sentinel value as a legitimate link state transition.
Fixes: 88131a812b ("amd-xgbe: Perform phy connect/disconnect at dev open/stop")
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Reviewed-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com>
Link: https://patch.msgid.link/20251010065142.1189310-1-Raju.Rangoju@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 21f4d45eba0b2dcae5dbc9e5e0ad08735c993f16 ]
Similarly to ipv4 tunnel, ipv6 version updates dev->needed_headroom, too.
While ipv4 tunnel headroom adjustment growth was limited in
commit 5ae1e9922bbd ("net: ip_tunnel: prevent perpetual headroom growth"),
ipv6 tunnel yet increases the headroom without any ceiling.
Reflect ipv4 tunnel headroom adjustment limit on ipv6 version.
Credits to Francesco Ruggeri, who was originally debugging this issue
and wrote local Arista-specific patch and a reproducer.
Fixes: 8eb30be035 ("ipv6: Create ip6_tnl_xmit")
Cc: Florian Westphal <fw@strlen.de>
Cc: Francesco Ruggeri <fruggeri05@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Link: https://patch.msgid.link/20251009-ip6_tunnel-headroom-v2-1-8e4dbd8f7e35@arista.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 70f92ab97042f243e1c8da1c457ff56b9b3e49f1 ]
After resume from S4 (hibernate), RTL8168H/RTL8111H truncates incoming
packets. Packet captures show messages like "IP truncated-ip - 146 bytes
missing!".
The issue is caused by RxConfig not being properly re-initialized after
resume. Re-initializing the RxConfig register before the chip
re-initialization sequence avoids the truncation and restores correct
packet reception.
This follows the same pattern as commit ef9da46dde ("r8169: fix data
corruption issue on RTL8402").
Fixes: 6e1d0b8988 ("r8169:add support for RTL8168H and RTL8107E")
Signed-off-by: Linmao Li <lilinmao@kylinos.cn>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/20251009122549.3955845-1-lilinmao@kylinos.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 65946eac6d888d50ae527c4e5c237dbe5cc3a2f2 ]
There is no error handling for `dma_map_single()` failures.
Add error handling by checking `dma_mapping_error()` and freeing
the `skb` using `dev_kfree_skb()` (process context) when it fails.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Yeounsu Moon <yyyynoom@gmail.com>
Tested-on: D-Link DGE-550T Rev-A3
Suggested-by: Simon Horman <horms@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ba569fb07a7e9e9b71e9282e27e993ba859295c2 ]
Commit 227619c3ff ("can: m_can: move runtime PM enable/disable to
m_can_platform") moved the PM runtime enable from the m_can core
driver into the m_can_platform.
That patch forgot to move the pm_runtime_disable() to
m_can_plat_remove(), so that unloading the m_can_platform driver
causes an "Unbalanced pm_runtime_enable!" error message.
Add the missing pm_runtime_disable() to m_can_plat_remove() to fix the
problem.
Cc: Patrik Flykt <patrik.flykt@linux.intel.com>
Fixes: 227619c3ff ("can: m_can: move runtime PM enable/disable to m_can_platform")
Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://patch.msgid.link/20250929-m_can-fix-state-handling-v4-1-682b49b49d9a@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 154d1e7ad9e5ce4b2aaefd3862b3dba545ad978d ]
The commit 168316db3583("dax: assert that i_rwsem is held
exclusive for writes") added lock assertions to ensure proper
locking in DAX operations. However, these assertions trigger
false-positive lockdep warnings since read lock is unnecessary
on read-only filesystems(e.g., erofs).
This patch skips the read lock assertion for read-only filesystems,
eliminating the spurious warnings while maintaining the integrity
checks for writable filesystems.
Fixes: 168316db35 ("dax: assert that i_rwsem is held exclusive for writes")
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Friendy Su <friendy.su@sony.com>
Reviewed-by: Daniel Palmer <daniel.palmer@sony.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 46f781e0d151844589dc2125c8cce3300546f92a upstream.
The sticky fingers quirk (MT_QUIRK_STICKY_FINGERS) was only considering
the case when slots were not released during the last report.
This can be problematic if the firmware forgets to release a finger
while others are still present.
This was observed on the Synaptics DLL0945 touchpad found on the Dell
XPS 9310 and the Dell Inspiron 5406.
Fixes: 4f4001bc76 ("HID: multitouch: fix rare Win 8 cases when the touch up event gets missing")
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
