[ Upstream commit 9c7babf94a ]
Because that's what Christoph wants for this error handling path
only XFS uses.
It requires a new iomap export for handling errors over delalloc
ranges. This is basically the XFS code as is stands, but even though
Christoph wants this as iomap funcitonality, we still have
to call it from the filesystem specific ->iomap_end callback, and
call into the iomap code with yet another filesystem specific
callback to punch the delalloc extent within the defined ranges.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b71f889c18 ]
xfs_buffered_write_iomap_end() currently converts the byte ranges
passed to it to filesystem blocks to pass them to the bmap code to
punch out delalloc blocks, but then has to convert filesytem
blocks back to byte ranges for page cache truncate.
We're about to make the page cache truncate go away and replace it
with a page cache walk, so having to convert everything to/from/to
filesystem blocks is messy and error-prone. It is much easier to
pass around byte ranges and convert to page indexes and/or
filesystem blocks only where those units are needed.
In preparation for the page cache walk being added, add a helper
that converts byte ranges to filesystem blocks and calls
xfs_bmap_punch_delalloc_range() and convert
xfs_buffered_write_iomap_end() to calculate limits in byte ranges.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 198dd8aede ]
xfs_buffered_write_iomap_end() has a comment about the safety of
punching delalloc extents based holding the IOLOCK_EXCL. This
comment is wrong, and punching delalloc extents is not race free.
When we punch out a delalloc extent after a write failure in
xfs_buffered_write_iomap_end(), we punch out the page cache with
truncate_pagecache_range() before we punch out the delalloc extents.
At this point, we only hold the IOLOCK_EXCL, so there is nothing
stopping mmap() write faults racing with this cleanup operation,
reinstantiating a folio over the range we are about to punch and
hence requiring the delalloc extent to be kept.
If this race condition is hit, we can end up with a dirty page in
the page cache that has no delalloc extent or space reservation
backing it. This leads to bad things happening at writeback time.
To avoid this race condition, we need the page cache truncation to
be atomic w.r.t. the extent manipulation. We can do this by holding
the mapping->invalidate_lock exclusively across this operation -
this will prevent new pages from being inserted into the page cache
whilst we are removing the pages and the backing extent and space
reservation.
Taking the mapping->invalidate_lock exclusively in the buffered
write IO path is safe - it naturally nests inside the IOLOCK (see
truncate and fallocate paths). iomap_zero_range() can be called from
under the mapping->invalidate_lock (from the truncate path via
either xfs_zero_eof() or xfs_truncate_page(), but iomap_zero_iter()
will not instantiate new delalloc pages (because it skips holes) and
hence will not ever need to punch out delalloc extents on failure.
Fix the locking issue, and clean up the code logic a little to avoid
unnecessary work if we didn't allocate the delalloc extent or wrote
the entire region we allocated.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 118e021b4b ]
When we reserve a delalloc region in xfs_buffered_write_iomap_begin,
we mark the iomap as IOMAP_F_NEW so that the the write context
understands that it allocated the delalloc region.
If we then fail that buffered write, xfs_buffered_write_iomap_end()
checks for the IOMAP_F_NEW flag and if it is set, it punches out
the unused delalloc region that was allocated for the write.
The assumption this code makes is that all buffered write operations
that can allocate space are run under an exclusive lock (i_rwsem).
This is an invalid assumption: page faults in mmap()d regions call
through this same function pair to map the file range being faulted
and this runs only holding the inode->i_mapping->invalidate_lock in
shared mode.
IOWs, we can have races between page faults and write() calls that
fail the nested page cache write operation that result in data loss.
That is, the failing iomap_end call will punch out the data that
the other racing iomap iteration brought into the page cache. This
can be reproduced with generic/34[46] if we arbitrarily fail page
cache copy-in operations from write() syscalls.
Code analysis tells us that the iomap_page_mkwrite() function holds
the already instantiated and uptodate folio locked across the iomap
mapping iterations. Hence the folio cannot be removed from memory
whilst we are mapping the range it covers, and as such we do not
care if the mapping changes state underneath the iomap iteration
loop:
1. if the folio is not already dirty, there is no writeback races
possible.
2. if we allocated the mapping (delalloc or unwritten), the folio
cannot already be dirty. See #1.
3. If the folio is already dirty, it must be up to date. As we hold
it locked, it cannot be reclaimed from memory. Hence we always
have valid data in the page cache while iterating the mapping.
4. Valid data in the page cache can exist when the underlying
mapping is DELALLOC, UNWRITTEN or WRITTEN. Having the mapping
change from DELALLOC->UNWRITTEN or UNWRITTEN->WRITTEN does not
change the data in the page - it only affects actions if we are
initialising a new page. Hence #3 applies and we don't care
about these extent map transitions racing with
iomap_page_mkwrite().
5. iomap_page_mkwrite() checks for page invalidation races
(truncate, hole punch, etc) after it locks the folio. We also
hold the mapping->invalidation_lock here, and hence the mapping
cannot change due to extent removal operations while we are
iterating the folio.
As such, filesystems that don't use bufferheads will never fail
the iomap_folio_mkwrite_iter() operation on the current mapping,
regardless of whether the iomap should be considered stale.
Further, the range we are asked to iterate is limited to the range
inside EOF that the folio spans. Hence, for XFS, we will only map
the exact range we are asked for, and we will only do speculative
preallocation with delalloc if we are mapping a hole at the EOF
page. The iterator will consume the entire range of the folio that
is within EOF, and anything beyond the EOF block cannot be accessed.
We never need to truncate this post-EOF speculative prealloc away in
the context of the iomap_page_mkwrite() iterator because if it
remains unused we'll remove it when the last reference to the inode
goes away.
Hence we don't actually need an .iomap_end() cleanup/error handling
path at all for iomap_page_mkwrite() for XFS. This means we can
separate the page fault processing from the complexity of the
.iomap_end() processing in the buffered write path. This also means
that the buffered write path will also be able to take the
mapping->invalidate_lock as necessary.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ffcaa2172cc1a85ddb8b783de96d38ca8855e248 upstream.
'scratch' is never freed. Fix this by calling kfree() in the success, and
in the error case.
Cc: stable@vger.kernel.org # +v5.13
Fixes: f221974525 ("security: keys: trusted: use ASN.1 TPM2 key format for the blobs")
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3903902401 upstream.
The original implementation of nfsd used signals to stop threads during
shutdown.
In Linux 2.3.46pre5 nfsd gained the ability to shutdown threads
internally it if was asked to run "0" threads. After this user-space
transitioned to using "rpc.nfsd 0" to stop nfsd and sending signals to
threads was no longer an important part of the API.
In commit 3ebdbe5203 ("SUNRPC: discard svo_setup and rename
svc_set_num_threads_sync()") (v5.17-rc1~75^2~41) we finally removed the
use of signals for stopping threads, using kthread_stop() instead.
This patch makes the "obvious" next step and removes the ability to
signal nfsd threads - or any svc threads. nfsd stops allowing signals
and we don't check for their delivery any more.
This will allow for some simplification in later patches.
A change worth noting is in nfsd4_ssc_setup_dul(). There was previously
a signal_pending() check which would only succeed when the thread was
being shut down. It should really have tested kthread_should_stop() as
well. Now it just does the latter, not the former.
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c79e387389 upstream.
The usual behavior of mask registers is writing a '1' bit to
disable (mask) an interrupt; similarly, writing a '1' bit to
an unmask register enables (unmasks) an interrupt.
Due to a longstanding issue in regmap-irq, mask and unmask
registers were inverted when both kinds of registers were
present on the same chip, ie. regmap-irq actually wrote '1's
to the mask register to enable an IRQ and '1's to the unmask
register to disable an IRQ.
This was fixed by commit e8ffb12e7f ("regmap-irq: Fix
inverted handling of unmask registers") but the fix is opt-in
via mask_unmask_non_inverted = true because it requires manual
changes for each affected driver. The new behavior will become
the default once all drivers have been updated.
The STPMIC1 has a normal mask register with separate set and
clear registers. The driver intends to use the set & clear
registers with regmap-irq and has compensated for regmap-irq's
inverted behavior, and should currently be working properly.
Thus, swap mask_base and unmask_base, and opt in to the new
non-inverted behavior.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221112151835.39059-16-aidanmacdonald.0x0@gmail.com
Cc: Yoann Congal <yoann.congal@smile.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ecfe9a015d upstream.
pinctrl_register_one_pin() doesn't check the result of radix_tree_insert()
despite they both may return a negative error code. Linus Walleij said he
has copied the radix tree code from kernel/irq/ where the functions calling
radix_tree_insert() are *void* themselves; I think it makes more sense to
propagate the errors from radix_tree_insert() upstream if we can do that...
Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20230719202253.13469-3-s.shtylyov@omp.ru
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: "Hemdan, Hagar Gamal Halim" <hagarhem@amazon.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 363f689600dd010703ce6391bcfc729a97d21840 upstream.
The ice_vc_fdir_param_check() function validates that the VSI ID of the
virtchnl flow director command matches the VSI number of the VF. This is
already checked by the call to ice_vc_isvalid_vsi_id() immediately
following this.
This check is unnecessary since ice_vc_isvalid_vsi_id() already confirms
this by checking that the VSI ID can locate the VSI associated with the VF
structure.
Furthermore, a following change is going to refactor the ice driver to
report VSI IDs using a relative index for each VF instead of reporting the
PF VSI number. This additional check would break that logic since it
enforces that the VSI ID matches the VSI number.
Since this check duplicates the logic in ice_vc_isvalid_vsi_id() and gets
in the way of refactoring that logic, remove it.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a21605993dd5dfd15edfa7f06705ede17b519026 upstream.
The ice_vc_isvalid_q_id() function takes a VSI index and a queue ID. It
looks up the VSI from its index, and then validates that the queue number
is valid for that VSI.
The VSI ID passed is typically a VSI index from the VF. This VSI number is
validated by the PF to ensure that it matches the VSI associated with the
VF already.
In every flow where ice_vc_isvalid_q_id() is called, the PF driver already
has a pointer to the VSI associated with the VF. This pointer is obtained
using ice_get_vf_vsi(), rather than looking up the VSI using the index sent
by the VF.
Since we already know which VSI to operate on, we can modify
ice_vc_isvalid_q_id() to take a VSI pointer instead of a VSI index. Pass
the VSI we found from ice_get_vf_vsi() instead of re-doing the lookup. This
removes some unnecessary computation and scanning of the VSI list.
It also removes the last place where the driver directly used the VSI
number from the VF. This will pave the way for refactoring to communicate
relative VSI numbers to the VF instead of absolute numbers from the PF
space.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 317a215d493230da361028ea8a4675de334bfa1a upstream.
Under some circumstances it may happen that the ks8851 Ethernet driver
stops sending data.
Currently the interrupt handler resets the interrupt status flags in the
hardware after handling TX. With this approach we may lose interrupts in
the time window between handling the TX interrupt and resetting the TX
interrupt status bit.
When all of the three following conditions are true then transmitting
data stops:
- TX queue is stopped to wait for room in the hardware TX buffer
- no queued SKBs in the driver (txq) that wait for being written to hw
- hardware TX buffer is empty and the last TX interrupt was lost
This is because reenabling the TX queue happens when handling the TX
interrupt status but if the TX status bit has already been cleared then
this interrupt will never come.
With this commit the interrupt status flags will be cleared before they
are handled. That way we stop losing interrupts.
The wrong handling of the ISR flags was there from the beginning but
with commit 3dc5d4454545 ("net: ks8851: Fix TX stall caused by TX
buffer overrun") the issue becomes apparent.
Fixes: 3dc5d4454545 ("net: ks8851: Fix TX stall caused by TX buffer overrun")
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Simon Horman <horms@kernel.org>
Cc: netdev@vger.kernel.org
Cc: stable@vger.kernel.org # 5.10+
Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 130afc8a886183a94cf6eab7d24f300014ff87ba upstream.
When slice_height is 0, the division by slice_height in the calculation
of the number of slices will cause a division by zero driver crash. This
leaves the kernel in a state that requires a reboot. This patch adds a
check to avoid the division by zero.
The stack trace below is for the 6.8.4 Kernel. I reproduced the issue on
a Z16 Gen 2 Lenovo Thinkpad with a Apple Studio Display monitor
connected via Thunderbolt. The amdgpu driver crashed with this exception
when I rebooted the system with the monitor connected.
kernel: ? die (arch/x86/kernel/dumpstack.c:421 arch/x86/kernel/dumpstack.c:434 arch/x86/kernel/dumpstack.c:447)
kernel: ? do_trap (arch/x86/kernel/traps.c:113 arch/x86/kernel/traps.c:154)
kernel: ? setup_dsc_config (drivers/gpu/drm/amd/amdgpu/../display/dc/dsc/dc_dsc.c:1053) amdgpu
kernel: ? do_error_trap (./arch/x86/include/asm/traps.h:58 arch/x86/kernel/traps.c:175)
kernel: ? setup_dsc_config (drivers/gpu/drm/amd/amdgpu/../display/dc/dsc/dc_dsc.c:1053) amdgpu
kernel: ? exc_divide_error (arch/x86/kernel/traps.c:194 (discriminator 2))
kernel: ? setup_dsc_config (drivers/gpu/drm/amd/amdgpu/../display/dc/dsc/dc_dsc.c:1053) amdgpu
kernel: ? asm_exc_divide_error (./arch/x86/include/asm/idtentry.h:548)
kernel: ? setup_dsc_config (drivers/gpu/drm/amd/amdgpu/../display/dc/dsc/dc_dsc.c:1053) amdgpu
kernel: dc_dsc_compute_config (drivers/gpu/drm/amd/amdgpu/../display/dc/dsc/dc_dsc.c:1109) amdgpu
After applying this patch, the driver no longer crashes when the monitor
is connected and the system is rebooted. I believe this is the same
issue reported for 3113.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Jose Fernandez <josef@netflix.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3113
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Limonciello, Mario" <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0d5e2a82232605b337972fb2c7d0cbc46898aca1 upstream
The UMAC_CMD register is written from different execution
contexts and has insufficient synchronization protections to
prevent possible corruption. Of particular concern are the
acceses from the phy_device delayed work context used by the
adjust_link call and the BH context that may be used by the
ndo_set_rx_mode call.
A spinlock is added to the driver to protect contended register
accesses (i.e. reg_lock) and it is used to synchronize accesses
to UMAC_CMD.
Fixes: 1c1008c793 ("net: bcmgenet: add main driver file")
Cc: stable@vger.kernel.org
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2dbe5f19368caae63b1f59f5bc2af78c7d522b3a upstream
The ndo_set_rx_mode function is synchronized with the
netif_addr_lock spinlock and BHs disabled. Since this
function is also invoked directly from the driver the
same synchronization should be applied.
Fixes: 72f9634762 ("net: bcmgenet: set Rx mode before starting netif")
Cc: stable@vger.kernel.org
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d85cf67a339685beae1d0aee27b7f61da95455be upstream
The EXT_RGMII_OOB_CTRL register can be written from different
contexts. It is predominantly written from the adjust_link
handler which is synchronized by the phydev->lock, but can
also be written from a different context when configuring the
mii in bcmgenet_mii_config().
The chances of contention are quite low, but it is conceivable
that adjust_link could occur during resume when WoL is enabled
so use the phydev->lock synchronizer in bcmgenet_mii_config()
to be sure.
Fixes: afe3f907d2 ("net: bcmgenet: power on MII block for all MII modes")
Cc: stable@vger.kernel.org
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6cf350658736681b9d6b0b6e58c5c76b235bb4c4 upstream.
If kobject_add() is fail in bind_rdev_to_array(), 'rdev->serial' will be
alloc not be freed, and kmemleak occurs.
unreferenced object 0xffff88815a350000 (size 49152):
comm "mdadm", pid 789, jiffies 4294716910
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc f773277a):
[<0000000058b0a453>] kmemleak_alloc+0x61/0xe0
[<00000000366adf14>] __kmalloc_large_node+0x15e/0x270
[<000000002e82961b>] __kmalloc_node.cold+0x11/0x7f
[<00000000f206d60a>] kvmalloc_node+0x74/0x150
[<0000000034bf3363>] rdev_init_serial+0x67/0x170
[<0000000010e08fe9>] mddev_create_serial_pool+0x62/0x220
[<00000000c3837bf0>] bind_rdev_to_array+0x2af/0x630
[<0000000073c28560>] md_add_new_disk+0x400/0x9f0
[<00000000770e30ff>] md_ioctl+0x15bf/0x1c10
[<000000006cfab718>] blkdev_ioctl+0x191/0x3f0
[<0000000085086a11>] vfs_ioctl+0x22/0x60
[<0000000018b656fe>] __x64_sys_ioctl+0xba/0xe0
[<00000000e54e675e>] do_syscall_64+0x71/0x150
[<000000008b0ad622>] entry_SYSCALL_64_after_hwframe+0x6c/0x74
Fixes: 963c555e75 ("md: introduce mddev_create/destroy_wb_pool for the change of member device")
Signed-off-by: Li Nan <linan122@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240208085556.2412922-1-linan666@huaweicloud.com
[ mddev_destroy_serial_pool third parameter was removed in mainline,
where there is no need to suspend within this function anymore. ]
Signed-off-by: Jeremy Bongio <jbongio@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 07a57a338adb6ec9e766d6a6790f76527f45ceb5 upstream.
Tony reported that the Machine check recovery was broken in v6.9-rc1, as
he was hitting a VM_BUG_ON when injecting uncorrectable memory errors to
DRAM.
After some more digging and debugging on his side, he realized that this
went back to v6.1, with the introduction of 'commit 0d206b5d2e
("mm/swap: add swp_offset_pfn() to fetch PFN from swap entry")'. That
commit, among other things, introduced swp_offset_pfn(), replacing
hwpoison_entry_to_pfn() in its favour.
The patch also introduced a VM_BUG_ON() check for is_pfn_swap_entry(), but
is_pfn_swap_entry() never got updated to cover hwpoison entries, which
means that we would hit the VM_BUG_ON whenever we would call
swp_offset_pfn() for such entries on environments with CONFIG_DEBUG_VM
set. Fix this by updating the check to cover hwpoison entries as well,
and update the comment while we are it.
Link: https://lkml.kernel.org/r/20240407130537.16977-1-osalvador@suse.de
Fixes: 0d206b5d2e ("mm/swap: add swp_offset_pfn() to fetch PFN from swap entry")
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Reported-by: Tony Luck <tony.luck@intel.com>
Closes: https://lore.kernel.org/all/Zg8kLSl2yAlA3o5D@agluck-desk3/
Tested-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: <stable@vger.kernel.org> [6.1.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1db7959aacd905e6487d0478ac01d89f86eb1e51 upstream.
[BUG]
There is a recent report that when memory pressure is high (including
cached pages), btrfs can spend most of its time on memory allocation in
btrfs_alloc_page_array() for compressed read/write.
[CAUSE]
For btrfs_alloc_page_array() we always go alloc_pages_bulk_array(), and
even if the bulk allocation failed (fell back to single page
allocation) we still retry but with extra memalloc_retry_wait().
If the bulk alloc only returned one page a time, we would spend a lot of
time on the retry wait.
The behavior was introduced in commit 395cb57e85 ("btrfs: wait between
incomplete batch memory allocations").
[FIX]
Although the commit mentioned that other filesystems do the wait, it's
not the case at least nowadays.
All the mainlined filesystems only call memalloc_retry_wait() if they
failed to allocate any page (not only for bulk allocation).
If there is any progress, they won't call memalloc_retry_wait() at all.
For example, xfs_buf_alloc_pages() would only call memalloc_retry_wait()
if there is no allocation progress at all, and the call is not for
metadata readahead.
So I don't believe we should call memalloc_retry_wait() unconditionally
for short allocation.
Call memalloc_retry_wait() if it fails to allocate any page for tree
block allocation (which goes with __GFP_NOFAIL and may not need the
special handling anyway), and reduce the latency for
btrfs_alloc_page_array().
Reported-by: Julian Taylor <julian.taylor@1und1.de>
Tested-by: Julian Taylor <julian.taylor@1und1.de>
Link: https://lore.kernel.org/all/8966c095-cbe7-4d22-9784-a647d1bf27c3@1und1.de/
Fixes: 395cb57e85 ("btrfs: wait between incomplete batch memory allocations")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9da27fb65a14c18efd4473e2e82b76b53ba60252 upstream.
The expiry time of a key is unconditionally overwritten during
instantiation, defaulting to turn it permanent. This causes a problem
for DNS resolution as the expiration set by user-space is overwritten to
TIME64_MAX, disabling further DNS updates. Fix this by restoring the
condition that key_set_expiry is only called when the pre-parser sets a
specific expiry.
Fixes: 39299bdd2546 ("keys, dns: Allow key types (eg. DNS) to be reclaimed immediately on expiry")
Signed-off-by: Silvio Gissi <sifonsec@amazon.com>
cc: David Howells <dhowells@redhat.com>
cc: Hazem Mohamed Abuelfotoh <abuehaze@amazon.com>
cc: linux-afs@lists.infradead.org
cc: linux-cifs@vger.kernel.org
cc: keyrings@vger.kernel.org
cc: netdev@vger.kernel.org
cc: stable@vger.kernel.org
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6827738dc684a87ad54ebba3ae7f3d7c977698eb upstream.
After the patch to restrict the use of mmap() to CAP_SYS_RAWIO for
the currently existing devices, most applications can no longer make
use of the accelerators as in production "you don't run things as root".
To keep the DSA and IAA accelerators usable, hook up a write() method
so that applications can still submit work. In the write method,
sufficient input validation is performed to avoid the security issue
that required the mmap CAP_SYS_RAWIO check.
One complication is that the DSA device allows for indirect ("batched")
descriptors. There is no reasonable way to do the input validation
on these indirect descriptors so the write() method will not allow these
to be submitted to the hardware on affected hardware, and the sysfs
enumeration of support for the opcode is also removed.
Early performance data shows that the performance delta for most common
cases is within the noise.
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e11452eb071b2a8e6ba52892b2e270bbdaa6640d upstream.
On Sapphire Rapids and related platforms, the DSA and IAA devices have an
erratum that causes direct access (for example, by using the ENQCMD or
MOVDIR64 instructions) from untrusted applications to be a security problem.
To solve this, add a flag to the PCI device enumeration and device structures
to indicate the presence/absence of this security exposure. In the mmap()
method of the device, this flag is then used to enforce that the user
has the CAP_SYS_RAWIO capability.
In a future patch, a write() based method will be added that allows untrusted
applications submit work to the accelerator, where the kernel can do
sanity checking on the user input to ensure secure operation of the accelerator.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 95feb3160eef0caa6018e175a5560b816aee8e79 upstream.
Due to an erratum with the SPR_DSA and SPR_IAX devices, it is not secure to assign
these devices to virtual machines. Add the PCI IDs of these devices to the VFIO
denylist to ensure that this is handled appropriately by the VFIO subsystem.
The SPR_DSA and SPR_IAX devices are on-SOC devices for the Sapphire Rapids
(and related) family of products that perform data movement and compression.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 40d442f969fb1e871da6fca73d3f8aef1f888558 upstream.
A recent commit fixed the code that parses the firmware files before
downloading them to the controller but introduced a memory leak in case
the sanity checks ever fail.
Make sure to free the firmware buffer before returning on errors.
Fixes: f905ae0be4b7 ("Bluetooth: qca: add missing firmware sanity checks")
Cc: stable@vger.kernel.org # 4.19
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cda0d6a198e2a7ec6f176c36173a57bdd8af7af2 upstream.
Add the missing sanity checks and move the 255-byte build-id buffer off
the stack to avoid leaking stack data through debugfs in case the
build-info reply is malformed.
Fixes: c0187b0bd3 ("Bluetooth: btqca: Add support to read FW build version for WCN3991 BTSoC")
Cc: stable@vger.kernel.org # 5.12
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0adcf6be1445ed50bfd4a451a7a782568f270197 upstream.
Add the missing sanity check when fetching the board id to avoid leaking
slab data when later requesting the firmware.
Fixes: a7f8dedb4be2 ("Bluetooth: qca: add support for QCA2066")
Cc: stable@vger.kernel.org # 6.7
Cc: Tim Jiang <quic_tjiang@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a112d3c72a227f2edbb6d8094472cc6e503e52af upstream.
The NVM configuration files used by WCN3988 and WCN3990/1/8 have two
sets of configuration tags that are enclosed by a type-length header of
type four which the current parser fails to account for.
Instead the driver happily parses random data as if it were valid tags,
something which can lead to the configuration data being corrupted if it
ever encounters the words 0x0011 or 0x001b.
As is clear from commit b63882549b ("Bluetooth: btqca: Fix the NVM
baudrate tag offcet for wcn3991") the intention has always been to
process the configuration data also for WCN3991 and WCN3998 which
encodes the baud rate at a different offset.
Fix the parser so that it can handle the WCN3xxx configuration files,
which has an enclosing type-length header of type four and two sets of
TLV tags enclosed by a type-length header of type two and three,
respectively.
Note that only the first set, which contains the tags the driver is
currently looking for, will be parsed for now.
With the parser fixed, the software in-band sleep bit will now be set
for WCN3991 and WCN3998 (as it is for later controllers) and the default
baud rate 3200000 may be updated by the driver also for WCN3xxx
controllers.
Notably the deep-sleep feature bit is already set by default in all
configuration files in linux-firmware.
Fixes: 4219d46868 ("Bluetooth: btqca: Add wcn3990 firmware download support.")
Cc: stable@vger.kernel.org # 4.19
Cc: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2e4edfa1e2bd821a317e7d006517dcf2f3fac68d upstream.
Add the missing sanity checks when parsing the firmware files before
downloading them to avoid accessing and corrupting memory beyond the
vmalloced buffer.
Fixes: 83e81961ff ("Bluetooth: btqca: Introduce generic QCA ROME support")
Cc: stable@vger.kernel.org # 4.10
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 691aae4f36f9825df6781da4399a1e718951085a upstream.
This patch fix xfstests generic/070 test with smb2 leases = yes.
cifs.ko doesn't set parent lease key and epoch in create context v2 lease.
ksmbd suppose that parent lease and epoch are vaild if data length is
v2 lease context size and handle directory lease using this values.
ksmbd should hanle it as v1 lease not v2 lease if parent lease key and
epoch are not set in create context v2 lease.
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 97c2ec64667bacc49881d2b2dd9afd4d1c3fbaeb upstream.
This patch fixes generic/011 when enable smb2 leases.
if ksmbd sends multiple notifications for a file, cifs increments
the reference count of the file but it does not decrement the count by
the failure of queue_work.
So even if the file is closed, cifs does not send a SMB2_CLOSE request.
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cc00bc83f26eb8f2d8d9f56b949b62fd774d8432 upstream.
ΕΛΕΝΗ reported that ksmbd binds to the IPV6 wildcard (::) by default for
ipv4 and ipv6 binding. So IPV4 connections are successful only when
the Linux system parameter bindv6only is set to 0 [default value].
If this parameter is set to 1, then the ipv6 wildcard only represents
any IPV6 address. Samba creates different sockets for ipv4 and ipv6
by default. This patch off sk_ipv6only to support IPV4/IPV6 connections
without creating two sockets.
Cc: stable@vger.kernel.org
Reported-by: ΕΛΕΝΗ ΤΖΑΒΕΛΛΑ <helentzavellas@yahoo.gr>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2a4b49bb58123bad6ec0e07b02845f74c23d5e04 upstream.
regulator_get() may sometimes be called more than once for the same
consumer device, something which before commit dbe954d8f1 ("regulator:
core: Avoid debugfs: Directory ... already present! error") resulted in
errors being logged.
A couple of recent commits broke the handling of such cases so that
attributes are now erroneously created in the debugfs root directory the
second time a regulator is requested and the log is filled with errors
like:
debugfs: File 'uA_load' in directory '/' already present!
debugfs: File 'min_uV' in directory '/' already present!
debugfs: File 'max_uV' in directory '/' already present!
debugfs: File 'constraint_flags' in directory '/' already present!
on any further calls.
Fixes: 2715bb11cf ("regulator: core: Fix more error checking for debugfs_create_dir()")
Fixes: 08880713ce ("regulator: core: Streamline debugfs operations")
Cc: stable@vger.kernel.org
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240509133304.8883-1-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 26e8383b116d0dbe74e28f86646563ab46d66d83 upstream.
Following the failure observed with a delay of 250us, experiments were
conducted with various delays. It was found that a delay of 350us
effectively mitigated the issue.
To provide a more optimal solution while still allowing a margin for
stability, the delay is being adjusted to 500us.
Signed-off-by: Lakshmi Yadlapati <lakshmiy@us.ibm.com>
Link: https://lore.kernel.org/r/20240507194603.1305750-1-lakshmiy@us.ibm.com
Fixes: 8d655e6523 ("hwmon: (ucd90320) Add minimum delay between bus accesses")
Reviewed-by: Eddie James <eajames@linux.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a26ff37e624d12e28077e5b24d2b264f62764ad6 upstream.
net_alloc_generic is called by net_alloc, which is called without any
locking. It reads max_gen_ptrs, which is changed under pernet_ops_rwsem. It
is read twice, first to allocate an array, then to set s.len, which is
later used to limit the bounds of the array access.
It is possible that the array is allocated and another thread is
registering a new pernet ops, increments max_gen_ptrs, which is then used
to set s.len with a larger than allocated length for the variable array.
Fix it by reading max_gen_ptrs only once in net_alloc_generic. If
max_gen_ptrs is later incremented, it will be caught in net_assign_generic.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Fixes: 073862ba5d ("netns: fix net_alloc_generic()")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240502132006.3430840-1-cascardo@igalia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 43b26bdd2ee5cfca80939be910d5b23a50cd7f9d upstream.
Starting BDB version 239, hdr_dpcd_refresh_timeout is introduced to
backlight BDB data. Commit 700034566d ("drm/i915/bios: Define more BDB
contents") updated the backlight BDB data accordingly. This broke the
parsing of backlight BDB data in VBT for versions 236 - 238 (both
inclusive) and hence the backlight controls are not responding on units
with the concerned BDB version.
backlight_control information has been present in backlight BDB data
from at least BDB version 191 onwards, if not before. Hence this patch
extracts the backlight_control information for BDB version 191 or newer.
Tested on Chromebooks using Jasperlake SoC (reports bdb->version = 236).
Tested on Chromebooks using Raptorlake SoC (reports bdb->version = 251).
v2: removed checking the block size of the backlight BDB data
[vsyrjala: this is completely safe thanks to commit e163cfb4c9
("drm/i915/bios: Make copies of VBT data blocks")]
Fixes: 700034566d ("drm/i915/bios: Define more BDB contents")
Cc: stable@vger.kernel.org
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240221180622.v2.1.I0690aa3e96a83a43b3fc33f50395d334b2981826@changeid
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit c286f6a973c66c0d993ecab9f7162c790e7064c8)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit be4a2a81b6b90d1a47eaeaace4cc8e2cb57b96c7 upstream.
We don't get the right offset in that case. The GPU has
an unused 4K area of the register BAR space into which you can
remap registers. We remap the HDP flush registers into this
space to allow userspace (CPU or GPU) to flush the HDP when it
updates VRAM. However, on systems with >4K pages, we end up
exposing PAGE_SIZE of MMIO space.
Fixes: d8e408a827 ("drm/amdkfd: Expose HDP registers to user space")
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d18ca8635db2f88c17acbdf6412f26d4f6aff414 upstream.
When using davinci-mcasp as CPU DAI with simple-card, there are some
conditions that cause simple-card to finish registering a sound card before
davinci-mcasp finishes registering all sound components. This creates a
non-working sound card from userspace with no problem indication apart
from not being able to play/record audio on a PCM stream. The issue
arises during simultaneous probe execution of both drivers. Specifically,
the simple-card driver, awaiting a CPU DAI, proceeds as soon as
davinci-mcasp registers its DAI. However, this process can lead to the
client mutex lock (client_mutex in soc-core.c) being held or davinci-mcasp
being preempted before PCM DMA registration on davinci-mcasp finishes.
This situation occurs when the probes of both drivers run concurrently.
Below is the code path for this condition. To solve the issue, defer
davinci-mcasp CPU DAI registration to the last step in the audio part of
it. This way, simple-card CPU DAI parsing will be deferred until all
audio components are registered.
Fail Code Path:
simple-card.c: probe starts
simple-card.c: simple_dai_link_of: simple_parse_node(..,cpu,..) returns EPROBE_DEFER, no CPU DAI yet
davinci-mcasp.c: probe starts
davinci-mcasp.c: devm_snd_soc_register_component() register CPU DAI
simple-card.c: probes again, finish CPU DAI parsing and call devm_snd_soc_register_card()
simple-card.c: finish probe
davinci-mcasp.c: *dma_pcm_platform_register() register PCM DMA
davinci-mcasp.c: probe finish
Cc: stable@vger.kernel.org
Fixes: 9fbd58cf4a ("ASoC: davinci-mcasp: Choose PCM driver based on configured DMA controller")
Signed-off-by: Joao Paulo Goncalves <joao.goncalves@toradex.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Reviewed-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20240417184138.1104774-1-jpaulo.silvagoncalves@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
