commit cc3628dcd851ddd8d418bf0c897024b4621ddc92 upstream.
The function xdp_convert_buff_to_frame() may return NULL if it fails
to correctly convert the XDP buffer into an XDP frame due to memory
constraints, internal errors, or invalid data. Failing to check for NULL
may lead to a NULL pointer dereference if the result is used later in
processing, potentially causing crashes, data corruption, or undefined
behavior.
On XDP redirect failure, the associated page must be released explicitly
if it was previously retained via get_page(). Failing to do so may result
in a memory leak, as the pages reference count is not decremented.
Cc: stable@vger.kernel.org # v5.9+
Fixes: 6c5aa6fc4d ("xen networking: add basic XDP support for xen-netfront")
Signed-off-by: Alexey Nepomnyashih <sdl@nppct.ru>
Link: https://patch.msgid.link/20250417122118.1009824-1-sdl@nppct.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fbd3039a64b01b769040677c4fc68badeca8e3b2 upstream.
As per virtio spec the fields cols and rows are specified as little
endian. Although there is no legacy interface requirement that would
state that cols and rows need to be handled as native endian when legacy
interface is used, unlike for the fields of the adjacent struct
virtio_console_control, I decided to err on the side of caution based
on some non-conclusive virtio spec repo archaeology and opt for using
virtio16_to_cpu() much like for virtio_console_control.event. Strictly
by the letter of the spec virtio_le_to_cpu() would have been sufficient.
But when the legacy interface is not used, it boils down to the same.
And when using the legacy interface, the device formatting these as
little endian when the guest is big endian would surprise me more than
it using guest native byte order (which would make it compatible with
the current implementation). Nevertheless somebody trying to implement
the spec following it to the letter could end up forcing little endian
byte order when the legacy interface is in use. So IMHO this ultimately
needs a judgement call by the maintainers.
Fixes: 8345adbf96 ("virtio: console: Accept console size along with resize control message")
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Cc: stable@vger.kernel.org # v2.6.35+
Message-Id: <20250322002954.3129282-1-pasic@linux.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 53bc1b73b67836ac9867f93dee7a443986b4a94f upstream.
Drivers need to purge TX SKB when stopping. Using skb_queue_purge() can't
report TX status to mac80211, causing ieee80211_free_ack_frame() warns
"Have pending ack frames!". Export ieee80211_purge_tx_queue() for drivers
to not have to reimplement it.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240822014255.10211-1-pkshih@realtek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit bb0511d59db9b3e40c8d51f0d151ccd0fd44071d ]
In the current code, the definition of regs_irqs_disabled() is actually
"!(regs->csr_prmd & CSR_CRMD_IE)" because arch_irqs_disabled_flags() is
defined as "!(flags & CSR_CRMD_IE)", it looks a little strange.
Define regs_irqs_disabled() as !(regs->csr_prmd & CSR_PRMD_PIE) directly
to make it more clear, no functional change.
While at it, the return value of regs_irqs_disabled() is true or false,
so change its type to reflect that and also make it always inline.
Fixes: 803b0fc5c3 ("LoongArch: Add process management")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fb8e9f59d6f292c3d9fea6c155c22ea5fc3053ab ]
As of commit dce4456619 ("mm/memtest: add ARCH_USE_MEMTEST"),
architectures must select ARCH_USE_MEMTESET to enable CONFIG_MEMTEST.
Commit 628c3bb40e ("LoongArch: Add boot and setup routines") added
support for early_memtest but did not select ARCH_USE_MEMTESET.
Fixes: 628c3bb40e ("LoongArch: Add boot and setup routines")
Tested-by: Erpeng Xu <xuerpeng@uniontech.com>
Tested-by: Yuli Wang <wangyuli@uniontech.com>
Signed-off-by: Yuli Wang <wangyuli@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a97fea9db9e9b9c4839d4232dde9f505ff5b4cc ]
Perf doesn't work at perf stat for hardware events on certain x86 platforms:
$perf stat -- sleep 1
Performance counter stats for 'sleep 1':
16.44 msec task-clock # 0.016 CPUs utilized
2 context-switches # 121.691 /sec
0 cpu-migrations # 0.000 /sec
54 page-faults # 3.286 K/sec
<not supported> cycles
<not supported> instructions
<not supported> branches
<not supported> branch-misses
The reason is that the check in x86_pmu_hw_config() for sampling events is
unexpectedly applied to counting events as well.
It should only impact x86 platforms with limit_period used for non-PEBS
events. For Intel platforms, it should only impact some older platforms,
e.g., HSW, BDW and NHM.
Fixes: 88ec7eedbbd2 ("perf/x86: Fix low freqency setting issue")
Signed-off-by: Luo Gengkun <luogengkun@huaweicloud.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20250423064724.3716211-1-luogengkun@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 07172206a26dcf3f0bf7c3ecaadd4242b008ea54 ]
Return -EINVAL instead of success if amd_ir_set_vcpu_affinity() is
invoked without use_vapic; lying to KVM about whether or not the IRTE was
configured to post IRQs is all kinds of bad.
Fixes: d98de49a53 ("iommu/amd: Enable vAPIC interrupt remapping mode by default")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250404193923.1413163-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3df275ef0a6ae181e8428a6589ef5d5231e58b5c ]
This patch fixes a Use-After-Free vulnerability in the HFSC qdisc class
handling. The issue occurs due to a time-of-check/time-of-use condition
in hfsc_change_class() when working with certain child qdiscs like netem
or codel.
The vulnerability works as follows:
1. hfsc_change_class() checks if a class has packets (q.qlen != 0)
2. It then calls qdisc_peek_len(), which for certain qdiscs (e.g.,
codel, netem) might drop packets and empty the queue
3. The code continues assuming the queue is still non-empty, adding
the class to vttree
4. This breaks HFSC scheduler assumptions that only non-empty classes
are in vttree
5. Later, when the class is destroyed, this can lead to a Use-After-Free
The fix adds a second queue length check after qdisc_peek_len() to verify
the queue wasn't emptied.
Fixes: 21f4d5cc25 ("net_sched/hfsc: fix curve activation in hfsc_change_class()")
Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Reviewed-by: Konstantin Khlebnikov <koct9i@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20250417184732.943057-2-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b7f0ee992adf601aa00c252418266177eb7ac2bc ]
A network restart test on a router led to an out-of-memory condition,
which was traced to a memory leak in the PHY LED trigger code.
The root cause is misuse of the devm API. The registration function
(phy_led_triggers_register) is called from phy_attach_direct, not
phy_probe, and the unregister function (phy_led_triggers_unregister)
is called from phy_detach, not phy_remove. This means the register and
unregister functions can be called multiple times for the same PHY
device, but devm-allocated memory is not freed until the driver is
unbound.
This also prevents kmemleak from detecting the leak, as the devm API
internally stores the allocated pointer.
Fix this by replacing devm_kzalloc/devm_kcalloc with standard
kzalloc/kcalloc, and add the corresponding kfree calls in the unregister
path.
Fixes: 3928ee6485 ("net: phy: leds: Add support for "link" trigger")
Fixes: 2e0bc452f4 ("net: phy: leds: add support for led triggers on phy link state change")
Signed-off-by: Hao Guan <hao.guan@siflower.com.cn>
Signed-off-by: Qingfang Deng <qingfang.deng@siflower.com.cn>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250417032557.2929427-1-dqfext@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 54bebe46871d4e56e05fcf55c1a37e7efa24e0a8 ]
Commands that have not been completed with scsi_done() do not clear the
SCMD_INITIALIZED flag and therefore will not be properly reinitialized.
Thus, the next time the scsi_cmnd structure is used, the command may
fail in scsi_cmd_runtime_exceeded() due to the old jiffies_at_alloc
value:
kernel: sd 16:0:1:84: [sdts] tag#405 timing out command, waited 720s
kernel: sd 16:0:1:84: [sdts] tag#405 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=66636s
Clear flags for commands that have not been completed by SCSI.
Fixes: 4abafdc436 ("block: remove the initialize_rq_fn blk_mq_ops method")
Signed-off-by: Anastasia Kovaleva <a.kovaleva@yadro.com>
Link: https://lore.kernel.org/r/20250324084933.15932-2-a.kovaleva@yadro.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc2dbc4983afedd198490cca043798f57c93e9bf ]
[BUG]
When running btrfs/004 with 4K fs block size and 64K page size,
sometimes fsstress workload can take 100% CPU for a while, but not long
enough to trigger a 120s hang warning.
[CAUSE]
When such 100% CPU usage happens, btrfs_punch_hole_lock_range() is
always in the call trace.
One example when this problem happens, the function
btrfs_punch_hole_lock_range() got the following parameters:
lock_start = 4096, lockend = 20469
Then we calculate @page_lockstart by rounding up lock_start to page
boundary, which is 64K (page size is 64K).
For @page_lockend, we round down the value towards page boundary, which
result 0. Then since we need to pass an inclusive end to
filemap_range_has_page(), we subtract 1 from the rounded down value,
resulting in (u64)-1.
In the above case, the range is inside the same page, and we do not even
need to call filemap_range_has_page(), not to mention to call it with
(u64)-1 at the end.
This behavior will cause btrfs_punch_hole_lock_range() to busy loop
waiting for irrelevant range to have its pages dropped.
[FIX]
Calculate @page_lockend by just rounding down @lockend, without
decreasing the value by one. So @page_lockend will no longer overflow.
Then exit early if @page_lockend is no larger than @page_lockstart.
As it means either the range is inside the same page, or the two pages
are adjacent already.
Finally only decrease @page_lockend when calling filemap_range_has_page().
Fixes: 0528476b6a ("btrfs: fix the filemap_range_has_page() call in btrfs_punch_hole_lock_range()")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2b8e6b58889c672e1ae3601d9b2b070be4dc2fbc ]
Returning a negative error code in a function with an unsigned
return type is a pretty bad idea. It is probably worse when the
justification for the change is "our static analisys tool found it".
Fixes: cf7de25878a1 ("cppc_cpufreq: Fix possible null pointer dereference")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73b24dc731731edf762f9454552cb3a5b7224949 ]
cpufreq_cpu_get_raw() can return NULL when the target CPU is not present
in the policy->cpus mask. scpi_cpufreq_get_rate() does not check for
this case, which results in a NULL pointer dereference.
Fixes: 343a8d17fa ("cpufreq: scpi: remove arm_big_little dependency")
Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 484d3f15cc6cbaa52541d6259778e715b2c83c54 ]
cpufreq_cpu_get_raw() can return NULL when the target CPU is not present
in the policy->cpus mask. scmi_cpufreq_get_rate() does not check for
this case, which results in a NULL pointer dereference.
Add NULL check after cpufreq_cpu_get_raw() to prevent this issue.
Fixes: 99d6bdf338 ("cpufreq: add support for CPU DVFS based on SCMI message protocol")
Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d7b98ae5221007d3f202746903d4c21c7caf7ea9 ]
When building with W=1, this variable is unused for configs with
CONFIG_CMA_SIZE_SEL_PERCENTAGE=y:
kernel/dma/contiguous.c:67:26: error: 'size_bytes' defined but not used [-Werror=unused-const-variable=]
Change this to a macro to avoid the warning.
Fixes: c64be2bb1c ("drivers: add Contiguous Memory Allocator")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20250409151557.3890443-1-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c02223e2d9df5cb37c51aedb78f3960294e09b5 ]
Currently if the filesystem for the cgroups version it wants to use is not
mounted charge_reserved_hugetlb.sh and hugetlb_reparenting_test.sh tests
will attempt to mount it on the hard coded path /dev/cgroup/memory,
deleting that directory when the test finishes. This will fail if there
is not a preexisting directory at that path, and since the directory is
deleted subsequent runs of the test will fail. Instead of relying on this
hard coded directory name use mktemp to generate a temporary directory to
use as a mountpoint, fixing both the assumption and the disruption caused
by deleting a preexisting directory.
This means that if the relevant cgroup filesystem is not already mounted
then we rely on having coreutils (which provides mktemp) installed. I
suspect that many current users are relying on having things automounted
by default, and given that the script relies on bash it's probably not an
unreasonable requirement.
Link: https://lkml.kernel.org/r/20250404-kselftest-mm-cgroup2-detection-v1-1-3dba6d32ba8c@kernel.org
Fixes: 209376ed2a ("selftests/vm: make charge_reserved_hugetlb.sh work with existing cgroup setting")
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Aishwarya TCV <aishwarya.tcv@arm.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Waiman Long <longman@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a31a4934b31faea76e735bab17e63d02fcd8e029 ]
Case values introduced in commit
5f78e1fb7a ("ASoC: qcom: Add driver support for audioreach solution")
cause out of bounds access in arrays of sc7280 driver data (e.g. in case
of RX_CODEC_DMA_RX_0 in sc7280_snd_hw_params()).
Redefine LPASS_MAX_PORTS to consider the maximum possible port id for
q6dsp as sc7280 driver utilizes some of those values.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 77d0ffef79 ("ASoC: qcom: Add macro for lpass DAI id's max limit")
Cc: stable@vger.kernel.org # v6.0+
Suggested-by: Mikhail Kobuk <m.kobuk@ispras.ru>
Suggested-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Evgeny Pimenov <pimenoveu12@gmail.com>
Link: https://patch.msgid.link/20250401204058.32261-1-pimenoveu12@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aecb63e88c5e5fb9afb782a1577264c76f179af9 ]
Ensure the PHY reset and perst is asserted during power-off to
guarantee it is in a reset state upon repeated power-on calls. This
resolves an issue where the PHY may not properly initialize during
subsequent power-on cycles. Power-on will deassert the reset at the
appropriate time after tuning the PHY parameters.
During suspend/resume cycles, we observed that the PHY PLL failed to
lock during resume when the CPU temperature increased from 65C to 75C.
The observed errors were:
phy phy-32f00000.pcie-phy.3: phy poweron failed --> -110
imx6q-pcie 33800000.pcie: waiting for PHY ready timeout!
imx6q-pcie 33800000.pcie: PM: dpm_run_callback(): genpd_resume_noirq+0x0/0x80 returns -110
imx6q-pcie 33800000.pcie: PM: failed to resume noirq: error -110
This resulted in a complete CPU freeze, which is resolved by ensuring
the PHY is in reset during power-on, thus preventing PHY PLL failures.
Cc: stable@vger.kernel.org
Fixes: 1aa97b0022 ("phy: freescale: pcie: Initialize the imx8 pcie standalone phy driver")
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250305144355.20364-3-eichest@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c14f7ccc9f ]
Replace assignment of PCI domain IDs from atomic_inc_return() to
ida_alloc().
Use two IDAs, one for static domain allocations (those which are defined in
device tree) and second for dynamic allocations (all other).
During removal of root bus / host bridge, also release the domain ID. The
released ID can be reused again, for example when dynamically loading and
unloading native PCI host bridge drivers.
This change also allows to mix static device tree assignment and dynamic by
kernel as all static allocations are reserved in dynamic pool.
[bhelgaas: set "err" if "bus->domain_nr < 0"]
Link: https://lore.kernel.org/r/20220714184130.5436-1-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Stable-dep-of: 804443c1f278 ("PCI: Fix reference leak in pci_register_host_bridge()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a46a0805635d07de50c2ac71588345323c13b2f9 ]
In of_resolve_phandles(), refcount of device node @local_fixups will be
increased if the for_each_child_of_node() exits early, but nowhere to
decrease the refcount, so cause refcount leakage for the node.
Fix by using __free() on @local_fixups.
Fixes: da56d04c80 ("of/resolver: Switch to new local fixups format.")
Cc: stable@vger.kernel.org
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20250209-of_irq_fix-v2-9-93e3a2659aa7@quicinc.com
[robh: Use __free() instead]
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5275e8b5293f65cc82a5ee5eab02dd573b911d6e ]
Use the __free() cleanup to simplify of_resolve_phandles() and remove
all the goto's.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Stable-dep-of: a46a0805635d ("of: resolver: Fix device node refcount leakage in of_resolve_phandles()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 16b86e5c03c5b3ef35bf5126b35384faa97428f0 ]
Refactor SD MUX driver to be able to reuse the same code on RZ/G3S.
RZ/G2{L,UL} has a limitation with regards to switching the clock source
for SD MUX (MUX clock source has to be switched to 266MHz before
switching b/w 533MHz and 400MHz). Rework the handling of this limitation
to use a clock notifier that is registered according to platform based
initialization data, so the SD MUX code can be reused on RZ/G3S.
As RZ/G2{L,UL} and RZ/G3S use different bits in different registers to
check if the clock switching has been done, this configuration (register
offset, register bits and bitfield width) is now passed through struct
cpg_core_clk::sconf (status configuration) from platform specific
initialization code.
Along with struct cpg_core_clk::sconf the mux table indices are also
passed from platform specific initialization code.
Also, mux flags are now passed to DEF_SD_MUX() as they will be used
later by RZ/G3S.
CPG_WEN_BIT macro has been introduced to select properly the WEN bit
of various registers.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231006103959.197485-3-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Stable-dep-of: 7f22a298d926 ("clk: renesas: r9a07g043: Fix HP clock source for RZ/Five")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 97c1c4ccda76d2919775d748cf223637cf0e82ae ]
Add clk_hw_data struct that keeps the core part of the clock data.
sd_hw_data embeds a member of type struct clk_hw_data along with other
members (in the next commits). This commit prepares the field for
refactoring the SD MUX clock driver.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230929053915.1530607-9-claudiu.beznea@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Stable-dep-of: 7f22a298d926 ("clk: renesas: r9a07g043: Fix HP clock source for RZ/Five")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c4c4fa57fd ]
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230308073945.2336302-7-u.kleine-koenig@pengutronix.de
Stable-dep-of: 276822a00db3 ("backlight: led_bl: Hold led_access lock when calling led_sysfs_disable()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0af1c801a15225304a6328258efbf2bee245c654 ]
The data used is all in local variables so there is no advantage
in setting *val = ret with the direct mode claim held.
Move it later to after error check.
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250217141630.897334-13-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Stable-dep-of: 8236644f5ecb ("iio: adc: ad7768-1: Fix conversion result sign")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3ba89b28ad ]
mv88e6xxx currently assumes that switch equipped with internal phys have
those phys mapped contiguously starting from port 0 (see
mv88e6xxx_phy_is_internal). However, some switches have internal PHYs but
NOT starting from port 0. For example 88e6393X, 88E6193X and 88E6191X have
integrated PHYs available on ports 1 to 8
To properly support this offset, add a new field to allow specifying an
internal PHYs layout. If field is not set, default layout is assumed (start
at port 0)
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 52fdc41c3278 ("net: dsa: mv88e6xxx: fix internal PHYs for 6320 family")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca34593190 ]
Since this function is a simple helper, we do not need to pass a full
dsa_switch structure, we can directly pass the mv88e6xxx_chip structure.
Doing so will allow to share this function with any other function
not manipulating dsa_switch structure but needing info about number of
internal phys
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 52fdc41c3278 ("net: dsa: mv88e6xxx: fix internal PHYs for 6320 family")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 267d7692f6 ]
Move the link forcing out of mac_config() and into the mac_prepare()
and mac_finish() methods. This results in no change to the order in
which these operations are performed, but does mean when we convert
mv88e6xxx to phylink_pcs support, we will continue to preserve this
ordering.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 52fdc41c3278 ("net: dsa: mv88e6xxx: fix internal PHYs for 6320 family")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dd805cf3e8 ]
Add DSA support for the phylink mac_prepare() and mac_finish() calls.
These were introduced as part of the PCS support to allow MACs to
perform preparatory steps prior to configuration, and finalisation
steps after the MAC and PCS has been configured.
Introducing phylink_pcs support to the mv88e6xxx DSA driver needs some
code moved out of its mac_config() stage into the mac_prepare() and
mac_finish() stages, and this commit facilitates such code in DSA
drivers.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 52fdc41c3278 ("net: dsa: mv88e6xxx: fix internal PHYs for 6320 family")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b1a2de9ccf ]
irq_find_mapping() does not need irq_dispose_mapping(), only
irq_create_mapping() does.
Calling irq_dispose_mapping() from mv88e6xxx_g2_irq_mdio_free() and from
the error path of mv88e6xxx_g2_irq_mdio_setup() effectively means that
the mdiobus logic (for internal PHY interrupts) is disposing of a
hwirq->virq mapping which it is not responsible of (but instead, the
function pair mv88e6xxx_g2_irq_setup() + mv88e6xxx_g2_irq_free() is).
With the current code structure, this isn't such a huge problem, because
mv88e6xxx_g2_irq_mdio_free() is called relatively close to the real
owner of the IRQ mappings:
mv88e6xxx_remove()
-> mv88e6xxx_unregister_switch()
-> mv88e6xxx_mdios_unregister()
-> mv88e6xxx_g2_irq_mdio_free()
-> mv88e6xxx_g2_irq_free()
and the switch isn't 'live' in any way such that it would be able of
generating interrupts at this point (mv88e6xxx_unregister_switch() has
been called).
However, there is a desire to split mv88e6xxx_mdios_unregister() and
mv88e6xxx_g2_irq_free() such that mv88e6xxx_mdios_unregister() only gets
called from mv88e6xxx_teardown(). This is much more problematic, as can
be seen below.
In a cross-chip scenario (say 3 switches d0032004.mdio-mii:10,
d0032004.mdio-mii:11 and d0032004.mdio-mii:12 which form a single DSA
tree), it is possible to unbind the device driver from a single switch
(say d0032004.mdio-mii:10).
When that happens, mv88e6xxx_remove() will be called for just that one
switch, and this will call mv88e6xxx_unregister_switch() which will tear
down the entire tree (calling mv88e6xxx_teardown() for all 3 switches).
Assuming mv88e6xxx_mdios_unregister() was moved to mv88e6xxx_teardown(),
at this stage, all 3 switches will have called irq_dispose_mapping() on
their mdiobus virqs.
When we bind again the device driver to d0032004.mdio-mii:10,
mv88e6xxx_probe() is called for it, which calls dsa_register_switch().
The DSA tree is now complete again, and mv88e6xxx_setup() is called for
all 3 switches.
Also assuming that mv88e6xxx_mdios_register() is moved to
mv88e6xxx_setup() (the 2 assumptions go together), at this point,
d0032004.mdio-mii:11 and d0032004.mdio-mii:12 don't have an IRQ mapping
for the internal PHYs anymore, as they've disposed of it in
mv88e6xxx_teardown(). Whereas switch d0032004.mdio-mii:10 has re-created
it, because its code path comes from mv88e6xxx_probe().
Simply put, this change prepares the driver to handle the movement of
mv88e6xxx_mdios_register() to mv88e6xxx_setup() for cross-chip DSA trees.
Also, the code being deleted was partially wrong anyway (in a way which
may have hidden this other issue). mv88e6xxx_g2_irq_mdio_setup()
populates bus->irq[] starting with offset chip->info->phy_base_addr, but
the teardown path doesn't apply that offset too. So it disposes of virq
0 for phy = [ 0, phy_base_addr ).
All switch families have phy_base_addr = 0, except for MV88E6141 and
MV88E6341 which have it as 0x10. I guess those families would have
happened to work by mistake in cross-chip scenarios too.
I'm deleting the body of mv88e6xxx_g2_irq_mdio_free() but leaving its
call sites and prototype in place. This is because, if we ever need to
add back some teardown procedure in the future, it will be perhaps
error-prone to deduce the proper call sites again. Whereas like this,
no extra code should get generated, it shouldn't bother anybody.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Klaus Kudielka <klaus.kudielka@gmail.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 52fdc41c3278 ("net: dsa: mv88e6xxx: fix internal PHYs for 6320 family")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9b98a7d2e5f4e2beeff88f6571da0cdc5883c7fb ]
Variable allocated by charlcd_alloc() should be released
by charlcd_free(). The following patch changed kfree() to
charlcd_free() to fix an API misuse.
Fixes: 718e05ed92 ("auxdisplay: Introduce hd44780_common.[ch]")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
