[ Upstream commit 093d9603b60093a9aaae942db56107f6432a5dca ]
The 'profile_pc()' function is used for timer-based profiling, which
isn't really all that relevant any more to begin with, but it also ends
up making assumptions based on the stack layout that aren't necessarily
valid.
Basically, the code tries to account the time spent in spinlocks to the
caller rather than the spinlock, and while I support that as a concept,
it's not worth the code complexity or the KASAN warnings when no serious
profiling is done using timers anyway these days.
And the code really does depend on stack layout that is only true in the
simplest of cases. We've lost the comment at some point (I think when
the 32-bit and 64-bit code was unified), but it used to say:
Assume the lock function has either no stack frame or a copy
of eflags from PUSHF.
which explains why it just blindly loads a word or two straight off the
stack pointer and then takes a minimal look at the values to just check
if they might be eflags or the return pc:
Eflags always has bits 22 and up cleared unlike kernel addresses
but that basic stack layout assumption assumes that there isn't any lock
debugging etc going on that would complicate the code and cause a stack
frame.
It causes KASAN unhappiness reported for years by syzkaller [1] and
others [2].
With no real practical reason for this any more, just remove the code.
Just for historical interest, here's some background commits relating to
this code from 2006:
0cb91a2293 ("i386: Account spinlocks to the caller during profiling for !FP kernels")
31679f38d8 ("Simplify profile_pc on x86-64")
and a code unification from 2009:
ef4512882d ("x86: time_32/64.c unify profile_pc")
but the basics of this thing actually goes back to before the git tree.
Link: https://syzkaller.appspot.com/bug?extid=84fe685c02cd112a2ac3 [1]
Link: https://lore.kernel.org/all/CAK55_s7Xyq=nh97=K=G1sxueOFrJDAvPOJAL4TPTCAYvmxO9_A@mail.gmail.com/ [2]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be84f32bb2c981ca670922e047cdde1488b233de ]
->d_name.name can change on rename and the earlier value can be freed;
there are conditions sufficient to stabilize it (->d_lock on dentry,
->d_lock on its parent, ->i_rwsem exclusive on the parent's inode,
rename_lock), but none of those are met at any of the sites. Take a stable
snapshot of the name instead.
Link: https://lore.kernel.org/all/20240202182732.GE2087318@ZenIV/
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6db1208bf95b4c091897b597c415e11edeab2e2d ]
An unintended consequence of commit 9c573cd31343 ("randomize_kstack:
Improve entropy diffusion") was that the per-architecture entropy size
filtering reduced how many bits were being added to the mix, rather than
how many bits were being used during the offsetting. All architectures
fell back to the existing default of 0x3FF (10 bits), which will consume
at most 1KiB of stack space. It seems that this is working just fine,
so let's avoid the confusion and update everything to use the default.
The prior intent of the per-architecture limits were:
arm64: capped at 0x1FF (9 bits), 5 bits effective
powerpc: uncapped (10 bits), 6 or 7 bits effective
riscv: uncapped (10 bits), 6 bits effective
x86: capped at 0xFF (8 bits), 5 (x86_64) or 6 (ia32) bits effective
s390: capped at 0xFF (8 bits), undocumented effective entropy
Current discussion has led to just dropping the original per-architecture
filters. The additional entropy appears to be safe for arm64, x86,
and s390. Quoting Arnd, "There is no point pretending that 15.75KB is
somehow safe to use while 15.00KB is not."
Co-developed-by: Yuntao Liu <liuyuntao12@huawei.com>
Signed-off-by: Yuntao Liu <liuyuntao12@huawei.com>
Fixes: 9c573cd31343 ("randomize_kstack: Improve entropy diffusion")
Link: https://lore.kernel.org/r/20240617133721.377540-1-liuyuntao12@huawei.com
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com> # s390
Link: https://lore.kernel.org/r/20240619214711.work.953-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9919cce62f68e6ab68dc2a975b5dc670f8ca7d40 ]
linehandle_set_config() behaves badly when direction is not set.
The configuration validation is borrowed from linehandle_create(), where,
to verify the intent of the user, the direction must be set to in order
to effect a change to the electrical configuration of a line. But, when
applied to reconfiguration, that validation does not allow for the unset
direction case, making it possible to clear flags set previously without
specifying the line direction.
Adding to the inconsistency, those changes are not immediately applied by
linehandle_set_config(), but will take effect when the line value is next
get or set.
For example, by requesting a configuration with no flags set, an output
line with GPIOHANDLE_REQUEST_ACTIVE_LOW and GPIOHANDLE_REQUEST_OPEN_DRAIN
requested could have those flags cleared, inverting the sense of the line
and changing the line drive to push-pull on the next line value set.
Ensure the intent of the user by disallowing configurations which do not
have direction set, returning an error to userspace to indicate that the
configuration is invalid.
And, for clarity, use lflags, a local copy of gcnf.flags, throughout when
dealing with the requested flags, rather than a mixture of both.
Fixes: e588bb1eae ("gpio: add new SET_CONFIG ioctl() to gpio chardev")
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20240626052925.174272-2-warthog618@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 23b2188920a25e88d447dd7d819a0b0f62fb4455 ]
arch_stack_walk() is called intensively in function_graph when the
kernel is compiled with CONFIG_TRACE_IRQFLAGS. As a result, the kernel
logs a lot of arch_stack_walk and its sub-functions into the ftrace
buffer. However, these functions should not appear on the trace log
because they are part of the ftrace itself. This patch references what
arm64 does for the smae function. So it further prevent the re-enter
kprobe issue, which is also possible on riscv.
Related-to: commit 0fbcd8abf3 ("arm64: Prohibit instrumentation on arch_stack_walk()")
Fixes: 680341382da5 ("riscv: add CALLER_ADDRx support")
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240613-dev-andyc-dyn-ftrace-v4-v1-1-1a538e12c01e@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 74fa02c4a5ea1ade5156a6ce494d3ea83881c2d8 ]
Cache the PCI state before bus master is disabled. The saved state is
later used for other cases like restoring config space after mode-2
reset.
Fixes: 5c03e5843e ("drm/amdgpu:add smu mode1/2 support for aldebaran")
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 47fc644f80 ]
Fix following checkpatch style errors in amdgpu_drv.c &
amdgpu_device.c
ERROR: exactly one space required after that #ifdef
ERROR: spaces required around that '+=' (ctx:WxV)
ERROR: space required before the open brace '{'
ERROR: spaces required around that '||' (ctx:VxE)
ERROR: space prohibited before that close parenthesis ')'
ERROR: space required before the open parenthesis '('
ERROR: space required before the open brace '{'
ERROR: code indent should use tabs where possible
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 74fa02c4a5ea ("drm/amdgpu: Fix pci state save during mode-1 reset")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7aa9b96e9a73e4ec1771492d0527bd5fc5ef9164 ]
Value of pdata->gpio_unbanked is taken from Device Tree. In case of broken
DT due to any error this value can be any. Without this value validation
there can be out of chips->irqs array boundaries access in
davinci_gpio_probe().
Validate the obtained nirq value so that it won't exceed the maximum
number of IRQs per bank.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: eb3744a2dd ("gpio: davinci: Do not assume continuous IRQ numbering")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Link: https://lore.kernel.org/r/20240618144344.16943-1-amishin@t-argos.ru
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f80a55fa90fa76d01e3fffaa5d0413e522ab9a00 ]
PRTYPE is the provider type, not the QP service type.
Fixes: eb793e2c92 ("nvme.h: add NVMe over Fabrics definitions")
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ae6a233092747e9652eb793d92f79d0820e01c6a ]
This is an effort to get rid of all multiplications from allocation
functions in order to prevent integer overflows [1] [2].
In this case, the memory allocated to store RADEONFB_CONN_LIMIT pointers
to "drm_connector" structures can be avoided. This is because this
memory area is never accessed.
Also, in the kzalloc function, it is preferred to use sizeof(*pointer)
instead of sizeof(type) due to the type of the variable can change and
one needs not change the former (unlike the latter).
At the same time take advantage to remove the "#if 0" block, the code
where the removed memory area was accessed, and the RADEONFB_CONN_LIMIT
constant due to now is never used.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [1]
Link: https://github.com/KSPP/linux/issues/160 [2]
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Erick Archer <erick.archer@outlook.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ddbf3204f600a4d1f153498f618369fca352ae00 ]
mbox_send_message() sends a u32 bit message, not a pointer to a message.
We only convert to a pointer type as a generic type. If we want to send
a dummy message of 0, then simply send 0 (NULL).
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240325165507.30323-1-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 17d1316de0d7dc1bdc5d6e3ad4efd30a9bf1a381 ]
Because the size passed to copy_from_user() cannot be known beforehand,
it needs to be checked during runtime with check_object_size. That makes
gcc believe that the content of sbuf can be used before init.
Fix:
./include/linux/thread_info.h:215:17: warning: ‘sbuf’ may be used uninitialized [-Wmaybe-uninitialized]
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 89b32ccb12ae67e630c6453d778ec30a592a212f ]
In load_data(), make the validation of and skipping over the main info
block match that in load_guspatch().
In load_guspatch(), add checking that the specified patch length matches
the actually supplied data, like load_data() already did.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Message-ID: <20240406064830.1029573-8-oswald.buddenhagen@gmx.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73e5984e540a76a2ee1868b91590c922da8c24c9 ]
private_key is overwritten with the key parameter passed in by the
caller (if present), or alternatively a newly generated private key.
However, it is possible that the caller provides a key (or the newly
generated key) which is shorter than the previous key. In that
scenario, some key material from the previous key would not be
overwritten. The easiest solution is to explicitly zeroize the entire
private_key array first.
Note that this patch slightly changes the behavior of this function:
previously, if the ecc_gen_privkey failed, the old private_key would
remain. Now, the private_key is always zeroized. This behavior is
consistent with the case where params.key is set and ecc_is_key_valid
fails.
Signed-off-by: Joachim Vandersmissen <git@jvdsn.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d33fe1714a44ff540629b149d8fab4ac6967585c ]
For CONFIG_CPUMASK_OFFSTACK=y kernel, explicit allocation of cpumask
variable on stack is not recommended since it can cause potential stack
overflow.
Instead, kernel code should always use *cpumask_var API(s) to allocate
cpumask var in config-neutral way, leaving allocation strategy to
CONFIG_CPUMASK_OFFSTACK.
Use *cpumask_var API(s) to address it.
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Link: https://lore.kernel.org/r/20240331053441.1276826-3-dawei.li@shingroup.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be4e1304419c99a164b4c0e101c7c2a756b635b9 ]
For CONFIG_CPUMASK_OFFSTACK=y kernel, explicit allocation of cpumask
variable on stack is not recommended since it can cause potential stack
overflow.
Instead, kernel code should always use *cpumask_var API(s) to allocate
cpumask var in config-neutral way, leaving allocation strategy to
CONFIG_CPUMASK_OFFSTACK.
Use *cpumask_var API(s) to address it.
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Link: https://lore.kernel.org/r/20240331053441.1276826-2-dawei.li@shingroup.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca537a34775c103f7b14d7bbd976403f1d1525d8 ]
struct rdma_restrack_entry's kern_name was set to KBUILD_MODNAME
in ib_create_cq(), while if the module exited but forgot del this
rdma_restrack_entry, it would cause a invalid address access in
rdma_restrack_clean() when print the owner of this rdma_restrack_entry.
These code is used to help find one forgotten PD release in one of the
ULPs. But it is not needed anymore, so delete them.
Signed-off-by: Wenchao Hao <haowenchao2@huawei.com>
Link: https://lore.kernel.org/r/20240318092320.1215235-1-haowenchao2@huawei.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1162bc2f8f5de7da23d18aa4b7fbd4e93c369c50 ]
The value of an arithmetic expression directory * master->erasesize is
subject to overflow due to a failure to cast operands to a larger data
type before perfroming arithmetic
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240315093758.20790-1-arefev@swemel.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5d31174f3c8c465d9dbe88f6b9d1fe5716f44981 ]
The assembly snippet in restore_fpregs_from_fpstate() that implements
X86_BUG_FXSAVE_LEAK fixup loads the value from a random variable,
preferably the one that is already in the L1 cache.
However, the access to fpinit_state via *fpstate pointer is not
implemented correctly. The "m" asm constraint requires dereferenced
pointer variable, otherwise the compiler just reloads the value
via temporary stack slot. The current asm code reflects this:
mov %rdi,(%rsp)
...
fildl (%rsp)
With dereferenced pointer variable, the code does what the
comment above the asm snippet says:
fildl (%rdi)
Also, remove the pointless %P operand modifier. The modifier is
ineffective on non-symbolic references - it was used to prevent
%rip-relative addresses in .altinstr sections, but FILDL in the
.text section can use %rip-relative addresses without problems.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20240315081849.5187-1-ubizjak@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 56e71885b0349241c07631a7b979b61e81afab6a ]
Virtio-net driver control queue implementation is not safe
when used with VDUSE. If the VDUSE application does not
reply to control queue messages, it currently ends up
hanging the kernel thread sending this command.
Some work is on-going to make the control queue
implementation robust with VDUSE. Until it is completed,
let's fail features check if control-queue feature is
requested.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Message-Id: <20240109111025.1320976-3-maxime.coquelin@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7931d32955e09d0a11b1fe0b6aac1bfa061c005c ]
register store validation for NFT_DATA_VALUE is conditional, however,
the datatype is always either NFT_DATA_VALUE or NFT_DATA_VERDICT. This
only requires a new helper function to infer the register type from the
set datatype so this conditional check can be removed. Otherwise,
pointer to chain object can be leaked through the registers.
Fixes: 96518518cc ("netfilter: add nftables")
Reported-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5dfe9d273932c647bdc9d664f939af9a5a398cbc ]
Testing determined that the recent commit 9e046bb111f1 ("tcp: clear
tp->retrans_stamp in tcp_rcv_fastopen_synack()") has a race, and does
not always ensure retrans_stamp is 0 after a TFO payload retransmit.
If transmit completion for the SYN+data skb happens after the client
TCP stack receives the SYNACK (which sometimes happens), then
retrans_stamp can erroneously remain non-zero for the lifetime of the
connection, causing a premature ETIMEDOUT later.
Testing and tracing showed that the buggy scenario is the following
somewhat tricky sequence:
+ Client attempts a TFO handshake. tcp_send_syn_data() sends SYN + TFO
cookie + data in a single packet in the syn_data skb. It hands the
syn_data skb to tcp_transmit_skb(), which makes a clone. Crucially,
it then reuses the same original (non-clone) syn_data skb,
transforming it by advancing the seq by one byte and removing the
FIN bit, and enques the resulting payload-only skb in the
sk->tcp_rtx_queue.
+ Client sets retrans_stamp to the start time of the three-way
handshake.
+ Cookie mismatches or server has TFO disabled, and server only ACKs
SYN.
+ tcp_ack() sees SYN is acked, tcp_clean_rtx_queue() clears
retrans_stamp.
+ Since the client SYN was acked but not the payload, the TFO failure
code path in tcp_rcv_fastopen_synack() tries to retransmit the
payload skb. However, in some cases the transmit completion for the
clone of the syn_data (which had SYN + TFO cookie + data) hasn't
happened. In those cases, skb_still_in_host_queue() returns true
for the retransmitted TFO payload, because the clone of the syn_data
skb has not had its tx completetion.
+ Because skb_still_in_host_queue() finds skb_fclone_busy() is true,
it sets the TSQ_THROTTLED bit and the retransmit does not happen in
the tcp_rcv_fastopen_synack() call chain.
+ The tcp_rcv_fastopen_synack() code next implicitly assumes the
retransmit process is finished, and sets retrans_stamp to 0 to clear
it, but this is later overwritten (see below).
+ Later, upon tx completion, tcp_tsq_write() calls
tcp_xmit_retransmit_queue(), which puts the retransmit in flight and
sets retrans_stamp to a non-zero value.
+ The client receives an ACK for the retransmitted TFO payload data.
+ Since we're in CA_Open and there are no dupacks/SACKs/DSACKs/ECN to
make tcp_ack_is_dubious() true and make us call
tcp_fastretrans_alert() and reach a code path that clears
retrans_stamp, retrans_stamp stays nonzero.
+ Later, if there is a TLP, RTO, RTO sequence, then the connection
will suffer an early ETIMEDOUT due to the erroneously ancient
retrans_stamp.
The fix: this commit refactors the code to have
tcp_rcv_fastopen_synack() retransmit by reusing the relevant parts of
tcp_simple_retransmit() that enter CA_Loss (without changing cwnd) and
call tcp_xmit_retransmit_queue(). We have tcp_simple_retransmit() and
tcp_rcv_fastopen_synack() share code in this way because in both cases
we get a packet indicating non-congestion loss (MTU reduction or TFO
failure) and thus in both cases we want to retransmit as many packets
as cwnd allows, without reducing cwnd. And given that retransmits will
set retrans_stamp to a non-zero value (and may do so in a later
calling context due to TSQ), we also want to enter CA_Loss so that we
track when all retransmitted packets are ACked and clear retrans_stamp
when that happens (to ensure later recurring RTOs are using the
correct retrans_stamp and don't declare ETIMEDOUT prematurely).
Fixes: 9e046bb111f1 ("tcp: clear tp->retrans_stamp in tcp_rcv_fastopen_synack()")
Fixes: a7abf3cd76 ("tcp: consider using standard rtx logic in tcp_rcv_fastopen_synack()")
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Link: https://patch.msgid.link/20240624144323.2371403-1-ncardwell.sw@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b1e31c134a8ab2e8f5fd62323b6b45a950ac704d ]
A couple of system calls were inadventently removed from the table during
a bugfix for 32-bit powerpc entry. Restore the original behavior.
Fixes: e237506238 ("powerpc/32: fix syscall wrappers with 64-bit arguments of unaligned register-pairs")
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 20a50787349fadf66ac5c48f62e58d753878d2bb ]
Johannes missed parisc back when he introduced the compat version
of these syscalls, so receiving cmsg messages that require a compat
conversion is still broken.
Use the correct calls like the other architectures do.
Fixes: 1dacc76d00 ("net/compat/wext: send different messages to compat tasks")
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d6fbd26fb872ec518d25433a12e8ce8163e20909 ]
sparc has the wrong compat version of recv() and recvfrom() for both the
direct syscalls and socketcall().
The direct syscalls just need to use the compat version. For socketcall,
the same thing could be done, but it seems better to completely remove
the custom assembler code for it and just use the same implementation that
everyone else has.
Fixes: 1dacc76d00 ("net/compat/wext: send different messages to compat tasks")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bae6428a9fffb2023191b0723e276cf1377a7c9f ]
sparc has two identical select syscalls at numbers 93 and 230, respectively.
During the conversion to the modern syscall.tbl format, the older one of the
two broke in compat mode, and now refers to the native 64-bit syscall.
Restore the correct behavior. This has very little effect, as glibc has
been using the newer number anyway.
Fixes: 6ff645dd68 ("sparc: add system call table generation support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b1c4b4d45263241ec6c2405a8df8265d4b58e707 ]
The switch global port interrupt mask, REG_SW_PORT_INT_MASK__4, is
defined as 0x001C in ksz9477_reg.h. The designers used 32-bit value in
anticipation for increase of port count in future product but currently
the maximum port count is 7 and the effective value is 0x7F in register
0x001F. Each port has its own interrupt mask and is defined as 0x#01F.
It uses only 4 bits for different interrupts.
The developer who implemented the current interrupt mechanism in the
switch driver noticed there are similarities between the mechanism to
mask port interrupts in global interrupt and individual interrupts in
each port and so used the same code to handle these interrupts. He
updated the code to use the new macro REG_SW_PORT_INT_MASK__1 which is
defined as 0x1F in ksz_common.h but he forgot to update the 32-bit write
to 8-bit as now the mask registers are 0x1F and 0x#01F.
In addition all KSZ switches other than the KSZ9897/KSZ9893 and LAN937X
families use only 8-bit access and so this common code will eventually
be changed to accommodate them.
Fixes: e1add7dd61 ("net: dsa: microchip: use common irq routines for girq and pirq")
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Link: https://lore.kernel.org/r/1719009262-2948-1-git-send-email-Tristram.Ha@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ff46e3b4421923937b7f6e44ffcd3549a074f321 ]
When bonding is configured in BOND_MODE_BROADCAST mode, if two identical
SYN packets are received at the same time and processed on different CPUs,
it can potentially create the same sk (sock) but two different reqsk
(request_sock) in tcp_conn_request().
These two different reqsk will respond with two SYNACK packets, and since
the generation of the seq (ISN) incorporates a timestamp, the final two
SYNACK packets will have different seq values.
The consequence is that when the Client receives and replies with an ACK
to the earlier SYNACK packet, we will reset(RST) it.
========================================================================
This behavior is consistently reproducible in my local setup,
which comprises:
| NETA1 ------ NETB1 |
PC_A --- bond --- | | --- bond --- PC_B
| NETA2 ------ NETB2 |
- PC_A is the Server and has two network cards, NETA1 and NETA2. I have
bonded these two cards using BOND_MODE_BROADCAST mode and configured
them to be handled by different CPU.
- PC_B is the Client, also equipped with two network cards, NETB1 and
NETB2, which are also bonded and configured in BOND_MODE_BROADCAST mode.
If the client attempts a TCP connection to the server, it might encounter
a failure. Capturing packets from the server side reveals:
10.10.10.10.45182 > localhost: Flags [S], seq 320236027,
10.10.10.10.45182 > localhost: Flags [S], seq 320236027,
localhost > 10.10.10.10.45182: Flags [S.], seq 2967855116,
localhost > 10.10.10.10.45182: Flags [S.], seq 2967855123, <==
10.10.10.10.45182 > localhost: Flags [.], ack 4294967290,
10.10.10.10.45182 > localhost: Flags [.], ack 4294967290,
localhost > 10.10.10.10.45182: Flags [R], seq 2967855117, <==
localhost > 10.10.10.10.45182: Flags [R], seq 2967855117,
Two SYNACKs with different seq numbers are sent by localhost,
resulting in an anomaly.
========================================================================
The attempted solution is as follows:
Add a return value to inet_csk_reqsk_queue_hash_add() to confirm if the
ehash insertion is successful (Up to now, the reason for unsuccessful
insertion is that a reqsk for the same connection has already been
inserted). If the insertion fails, release the reqsk.
Due to the refcnt, Kuniyuki suggests also adding a return value check
for the DCCP module; if ehash insertion fails, indicating a successful
insertion of the same connection, simply release the reqsk as well.
Simultaneously, In the reqsk_queue_hash_req(), the start of the
req->rsk_timer is adjusted to be after successful insertion.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: luoxuanqiang <luoxuanqiang@kylinos.cn>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240621013929.1386815-1-luoxuanqiang@kylinos.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7e9f79428372c6eab92271390851be34ab26bfb4 ]
syzkaller reports a warning in __xdp_reg_mem_model().
The warning occurs only if __mem_id_init_hash_table() returns an error. It
returns the error in two cases:
1. memory allocation fails;
2. rhashtable_init() fails when some fields of rhashtable_params
struct are not initialized properly.
The second case cannot happen since there is a static const rhashtable_params
struct with valid fields. So, warning is only triggered when there is a
problem with memory allocation.
Thus, there is no sense in using WARN() to handle this error and it can be
safely removed.
WARNING: CPU: 0 PID: 5065 at net/core/xdp.c:299 __xdp_reg_mem_model+0x2d9/0x650 net/core/xdp.c:299
CPU: 0 PID: 5065 Comm: syz-executor883 Not tainted 6.8.0-syzkaller-05271-gf99c5f563c17 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
RIP: 0010:__xdp_reg_mem_model+0x2d9/0x650 net/core/xdp.c:299
Call Trace:
xdp_reg_mem_model+0x22/0x40 net/core/xdp.c:344
xdp_test_run_setup net/bpf/test_run.c:188 [inline]
bpf_test_run_xdp_live+0x365/0x1e90 net/bpf/test_run.c:377
bpf_prog_test_run_xdp+0x813/0x11b0 net/bpf/test_run.c:1267
bpf_prog_test_run+0x33a/0x3b0 kernel/bpf/syscall.c:4240
__sys_bpf+0x48d/0x810 kernel/bpf/syscall.c:5649
__do_sys_bpf kernel/bpf/syscall.c:5738 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5736 [inline]
__x64_sys_bpf+0x7c/0x90 kernel/bpf/syscall.c:5736
do_syscall_64+0xfb/0x240
entry_SYSCALL_64_after_hwframe+0x6d/0x75
Found by Linux Verification Center (linuxtesting.org) with syzkaller.
Fixes: 8d5d885275 ("xdp: rhashtable with allocator ID to pointer mapping")
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://lore.kernel.org/all/20240617162708.492159-1-d.dulov@aladdin.ru
Link: https://lore.kernel.org/bpf/20240624080747.36858-1-d.dulov@aladdin.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d963c95bc9840d070a788c35e41b715a648717f7 ]
Errata DS80000758 states that carrier sense back pressure mode can cause
link down issues in 100BASE-TX half duplex mode. The datasheet also
recommends to always use the collision based back pressure mode.
Fixes: b987e98e50 ("dsa: add DSA switch driver for Microchip KSZ9477")
Signed-off-by: Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com>
Reviewed-by: Woojung Huh <Woojung.huh@microchip.com>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 54a4e5c16382e871c01dd82b47e930fdce30406b ]
PHY_ID_KSZ9477 was supported but not added to the device table passed to
MODULE_DEVICE_TABLE.
Fixes: fc3973a1fa ("phy: micrel: add Microchip KSZ 9477 Switch PHY support")
Signed-off-by: Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 49bbeb5719c2f56907d3a9623b47c6c15c2c431d ]
There are 2 types of outstanding tx skb's:
Type 1: Packets that are sitting in the drivers ind_buff that are
waiting to be batch sent to the NIC. During a device reset, these are
freed with a call to ibmvnic_tx_scrq_clean_buffer()
Type 2: Packets that have been sent to the NIC and are awaiting a TX
completion IRQ. These are free'd during a reset with a call to
clean_tx_pools()
During any reset which requires us to free the tx irq, ensure that the
Type 2 skb references are freed. Since the irq is released, it is
impossible for the NIC to inform of any completions.
Furthermore, later in the reset process is a call to init_tx_pools()
which marks every entry in the tx pool as free (ie not outstanding).
So if the driver is to make a call to init_tx_pools(), it must first
be sure that the tx pool is empty of skb references.
This issue was discovered by observing the following in the logs during
EEH testing:
TX free map points to untracked skb (tso_pool 0 idx=4)
TX free map points to untracked skb (tso_pool 0 idx=5)
TX free map points to untracked skb (tso_pool 1 idx=36)
Fixes: 65d6470d13 ("ibmvnic: clean pending indirect buffs during reset")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cfa1a2329a691ffd991fcf7248a57d752e712881 ]
The BPF ring buffer internally is implemented as a power-of-2 sized circular
buffer, with two logical and ever-increasing counters: consumer_pos is the
consumer counter to show which logical position the consumer consumed the
data, and producer_pos which is the producer counter denoting the amount of
data reserved by all producers.
Each time a record is reserved, the producer that "owns" the record will
successfully advance producer counter. In user space each time a record is
read, the consumer of the data advanced the consumer counter once it finished
processing. Both counters are stored in separate pages so that from user
space, the producer counter is read-only and the consumer counter is read-write.
One aspect that simplifies and thus speeds up the implementation of both
producers and consumers is how the data area is mapped twice contiguously
back-to-back in the virtual memory, allowing to not take any special measures
for samples that have to wrap around at the end of the circular buffer data
area, because the next page after the last data page would be first data page
again, and thus the sample will still appear completely contiguous in virtual
memory.
Each record has a struct bpf_ringbuf_hdr { u32 len; u32 pg_off; } header for
book-keeping the length and offset, and is inaccessible to the BPF program.
Helpers like bpf_ringbuf_reserve() return `(void *)hdr + BPF_RINGBUF_HDR_SZ`
for the BPF program to use. Bing-Jhong and Muhammad reported that it is however
possible to make a second allocated memory chunk overlapping with the first
chunk and as a result, the BPF program is now able to edit first chunk's
header.
For example, consider the creation of a BPF_MAP_TYPE_RINGBUF map with size
of 0x4000. Next, the consumer_pos is modified to 0x3000 /before/ a call to
bpf_ringbuf_reserve() is made. This will allocate a chunk A, which is in
[0x0,0x3008], and the BPF program is able to edit [0x8,0x3008]. Now, lets
allocate a chunk B with size 0x3000. This will succeed because consumer_pos
was edited ahead of time to pass the `new_prod_pos - cons_pos > rb->mask`
check. Chunk B will be in range [0x3008,0x6010], and the BPF program is able
to edit [0x3010,0x6010]. Due to the ring buffer memory layout mentioned
earlier, the ranges [0x0,0x4000] and [0x4000,0x8000] point to the same data
pages. This means that chunk B at [0x4000,0x4008] is chunk A's header.
bpf_ringbuf_submit() / bpf_ringbuf_discard() use the header's pg_off to then
locate the bpf_ringbuf itself via bpf_ringbuf_restore_from_rec(). Once chunk
B modified chunk A's header, then bpf_ringbuf_commit() refers to the wrong
page and could cause a crash.
Fix it by calculating the oldest pending_pos and check whether the range
from the oldest outstanding record to the newest would span beyond the ring
buffer size. If that is the case, then reject the request. We've tested with
the ring buffer benchmark in BPF selftests (./benchs/run_bench_ringbufs.sh)
before/after the fix and while it seems a bit slower on some benchmarks, it
is still not significantly enough to matter.
Fixes: 457f44363a ("bpf: Implement BPF ring buffer and verifier support for it")
Reported-by: Bing-Jhong Billy Jheng <billy@starlabs.sg>
Reported-by: Muhammad Ramdhan <ramdhan@starlabs.sg>
Co-developed-by: Bing-Jhong Billy Jheng <billy@starlabs.sg>
Co-developed-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Bing-Jhong Billy Jheng <billy@starlabs.sg>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240621140828.18238-1-daniel@iogearbox.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c28947de2bed40217cf256c5d0d16880054fcf13 ]
The following two shared buffer operations make use of the Shared Buffer
Status Register (SBSR):
# devlink sb occupancy snapshot pci/0000:01:00.0
# devlink sb occupancy clearmax pci/0000:01:00.0
The register has two masks of 256 bits to denote on which ingress /
egress ports the register should operate on. Spectrum-4 has more than
256 ports, so the register was extended by cited commit with a new
'port_page' field.
However, when filling the register's payload, the driver specifies the
ports as absolute numbers and not relative to the first port of the port
page, resulting in memory corruptions [1].
Fix by specifying the ports relative to the first port of the port page.
[1]
BUG: KASAN: slab-use-after-free in mlxsw_sp_sb_occ_snapshot+0xb6d/0xbc0
Read of size 1 at addr ffff8881068cb00f by task devlink/1566
[...]
Call Trace:
<TASK>
dump_stack_lvl+0xc6/0x120
print_report+0xce/0x670
kasan_report+0xd7/0x110
mlxsw_sp_sb_occ_snapshot+0xb6d/0xbc0
mlxsw_devlink_sb_occ_snapshot+0x75/0xb0
devlink_nl_sb_occ_snapshot_doit+0x1f9/0x2a0
genl_family_rcv_msg_doit+0x20c/0x300
genl_rcv_msg+0x567/0x800
netlink_rcv_skb+0x170/0x450
genl_rcv+0x2d/0x40
netlink_unicast+0x547/0x830
netlink_sendmsg+0x8d4/0xdb0
__sys_sendto+0x49b/0x510
__x64_sys_sendto+0xe5/0x1c0
do_syscall_64+0xc1/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
[...]
Allocated by task 1:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_kmalloc+0x8f/0xa0
copy_verifier_state+0xbc2/0xfb0
do_check_common+0x2c51/0xc7e0
bpf_check+0x5107/0x9960
bpf_prog_load+0xf0e/0x2690
__sys_bpf+0x1a61/0x49d0
__x64_sys_bpf+0x7d/0xc0
do_syscall_64+0xc1/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 1:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
poison_slab_object+0x109/0x170
__kasan_slab_free+0x14/0x30
kfree+0xca/0x2b0
free_verifier_state+0xce/0x270
do_check_common+0x4828/0xc7e0
bpf_check+0x5107/0x9960
bpf_prog_load+0xf0e/0x2690
__sys_bpf+0x1a61/0x49d0
__x64_sys_bpf+0x7d/0xc0
do_syscall_64+0xc1/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes: f8538aec88 ("mlxsw: Add support for more than 256 ports in SBSR register")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad53f5f54f351e967128edbc431f0f26427172cf ]
The very first flush in any port will flush all learned addresses in all
ports. This can be observed by unplugging the cable from one port while
additional ports are connected and dumping the fdb entries.
This problem is caused by the initially wrong value programmed to the
REG_SW_LUE_CTRL_1 register. Setting SW_FLUSH_STP_TABLE and
SW_FLUSH_MSTP_TABLE bits does not have an immediate effect. It is when
ksz9477_flush_dyn_mac_table() is called then the SW_FLUSH_STP_TABLE bit
takes effect and flushes all learned entries. After that call both bits
are reset and so the next port flush will not cause such problem again.
Fixes: b987e98e50 ("dsa: add DSA switch driver for Microchip KSZ9477")
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Link: https://patch.msgid.link/1718756202-2731-1-git-send-email-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 90f3feb24172185f1832636264943e8b5e289245 ]
priv->pdev pointer was set after being used in
fsl_asoc_card_audmux_init().
Move this assignment at the start of the probe function, so
sub-functions can correctly use pdev through priv.
fsl_asoc_card_audmux_init() dereferences priv->pdev to get access to the
dev struct, used with dev_err macros.
As priv is zero-initialised, there would be a NULL pointer dereference.
Note that if priv->dev is dereferenced before assignment but never used,
for example if there is no error to be printed, the driver won't crash
probably due to compiler optimisations.
Fixes: 708b4351f0 ("ASoC: fsl: Add Freescale Generic ASoC Sound Card with ASRC support")
Signed-off-by: Elinor Montmasson <elinor.montmasson@savoirfairelinux.com>
Link: https://patch.msgid.link/20240620132511.4291-2-elinor.montmasson@savoirfairelinux.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 70fa3900c3ed92158628710e81d274e5cb52f92b ]
ACP supports different pin configurations for I2S IO. Checking ACP pin
configuration value against specific value breaks the functionality for
other I2S pin configurations. This check is no longer required in i2s dai
driver probe call as i2s configuration check will be verified during acp
platform device creation sequence.
Remove i2s_mode check in acp_i2s_probe() function.
Fixes: b24484c18b ("ASoC: amd: acp: ACP code generic to support newer platforms")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://msgid.link/r/20240617072844.871468-2-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4181b51c38875de9f6f11248fa0bcf3246c19c82 ]
In commit 4e4dc65ab5 ("s390/pci: use phys_to_virt() for AIBVs/DIBVs")
the setting of dibv_addr was missed when adding virt_to_phys(). This
only affects systems with directed interrupt delivery enabled which are
not generally available.
Fixes: 4e4dc65ab5 ("s390/pci: use phys_to_virt() for AIBVs/DIBVs")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ccd8d753f0fe8f16745fa2b6be5946349731d901 ]
When TRCM mode is enabled, I2S RX and TX clocks are synchronized through
selected clock source. Without this fix BCLK and LRCK might get parented
to an uninitialized MCLK and the DAI will receive data at wrong pace.
However, unlike in original i2s-tdm driver, there is no need to manually
synchronize mclk_rx and mclk_tx, as only one gets used anyway.
Tested on a board with RK3568 SoC and Silergy SY24145S codec with enabled and
disabled TRCM mode.
Fixes: 9e2ab4b18ebd ("ASoC: rockchip: i2s-tdm: Fix inaccurate sampling rates")
Signed-off-by: Alibek Omarov <a1ba.omarov@gmail.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://msgid.link/r/20240604184752.697313-1-a1ba.omarov@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 7395dfacfff65e9938ac0889dafa1ab01e987d15 upstream
Add a timestamp field at the beginning of the transaction, store it
in the nftables per-netns area.
Update set backend .insert, .deactivate and sync gc path to use the
timestamp, this avoids that an element expires while control plane
transaction is still unfinished.
.lookup and .update, which are used from packet path, still use the
current time to check if the element has expired. And .get path and dump
also since this runs lockless under rcu read size lock. Then, there is
async gc which also needs to check the current time since it runs
asynchronously from a workqueue.
Fixes: c3e1b005ed ("netfilter: nf_tables: add set element timeout support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d4e001ffeccfc128c715057e866f301ac9b95728 ]
The referenced i2c-controller.yaml schema is provided by dtschema
package (outside of Linux kernel), so use full path to reference it.
Cc: stable@vger.kernel.org
Fixes: 7ea75dd386 ("dt-bindings: i2c: convert i2c-at91 to json-schema")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 277a0363120276645ae598d8d5fea7265e076ae9 ]
Commit 90c2d2eb7a ("MIPS: pci: lantiq: switch to using gpiod API") not
only switched to the gpiod API, but also inverted / changed the polarity
of the GPIO.
According to the PCI specification, the RST# pin is an active-low
signal. However, most of the device trees that have been widely used for
a long time (mainly in the openWrt project) define this GPIO as
active-high and the old driver code inverted the signal internally.
Apparently there are actually boards where the reset gpio must be
operated inverted. For this reason, we cannot use the GPIOD_OUT_LOW/HIGH
flag for initialization. Instead, we must explicitly set the gpio to
value 1 in order to take into account any "GPIO_ACTIVE_LOW" flag that
may have been set.
In order to remain compatible with all these existing device trees, we
should therefore keep the logic as it was before the commit.
Fixes: 90c2d2eb7a ("MIPS: pci: lantiq: switch to using gpiod API")
Cc: stable@vger.kernel.org
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
