[ Upstream commit cc879ab3ce ]
thread_change_pc() uses CPU local data, so must be protected from
swapping CPUs while it is reading the breakpoint struct.
The error is more noticeable after 1e60f3564b ("powerpc/watchpoints:
Track perf single step directly on the breakpoint"), which added an
unconditional __this_cpu_read() call in thread_change_pc(). However the
existing __this_cpu_read() that runs if a breakpoint does need to be
re-inserted has the same issue.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230829063457.54157-2-bgray@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4506f23e11 ]
Currently, if the OPEN compound experiencing an error and needs to
get the file attributes separately, it will send a stand alone
GETATTR but it would use the filehandle from the results of
the OPEN compound. In case of the CLAIM_FH OPEN, nfs_openres's fh
is zero value. That generate a GETATTR that's sent with a zero
value filehandle, and results in the server returning an error.
Instead, for the CLAIM_FH OPEN, take the filehandle that was used
in the PUTFH of the OPEN compound.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 735de5caf7 ]
The WARN_ONCE was issued also in cases that had nothing to do with VM_IO
(e.g. if the start address was just a random value and uaccess fails with
-EFAULT).
There are no reports of WARN_ONCE being issued for actual VM_IO cases, so
just drop it and instead add a note to the comment before the function.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reported-by: Yikebaer Aizezi <yikebaer61@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fac58baf8f ]
i.MX rpmsg sound cards work on codec slave mode. MCLK will be disabled
by CPU DAI driver in hw_free(). Some codec requires MCLK present at
power up/down sequence. So need to set ignore_pmdown_time to power down
codec immediately before MCLK is turned off.
Take WM8962 as an example, if MCLK is disabled before DAPM power down
playback stream, FIFO error will arise in WM8962 which will have bad
impact on playback next.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20230913102656.2966757-1-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 55122e0130 ]
Building memblock tests produces the following warning:
cc -I. -I../../include -Wall -O2 -fsanitize=address -fsanitize=undefined -D CONFIG_PHYS_ADDR_T_64BIT -c -o main.o main.c
In file included from tests/common.h:9,
from tests/basic_api.h:5,
from main.c:2:
./linux/memblock.h:601:50: warning: ‘struct seq_file’ declared inside parameter list will not be visible outside of this definition or declaration
601 | static inline void memtest_report_meminfo(struct seq_file *m) { }
| ^~~~~~~~
Add declaration of 'struct seq_file' to tools/include/linux/seq_file.h
to fix it.
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5e1bffbdb6 ]
Building memblock tests produces the following warning:
cc -I. -I../../include -Wall -O2 -fsanitize=address -fsanitize=undefined -D CONFIG_PHYS_ADDR_T_64BIT -c -o main.o main.c
In file included from ../../include/linux/pfn.h:5,
from ./linux/memory_hotplug.h:6,
from ./linux/init.h:7,
from ./linux/memblock.h:11,
from tests/common.h:8,
from tests/basic_api.h:5,
from main.c:2:
../../include/linux/mm.h:14: warning: "__ALIGN_KERNEL" redefined
14 | #define __ALIGN_KERNEL(x, a) __ALIGN_KERNEL_MASK(x, (typeof(x))(a) - 1)
|
In file included from ../../include/linux/mm.h:6,
from ../../include/linux/pfn.h:5,
from ./linux/memory_hotplug.h:6,
from ./linux/init.h:7,
from ./linux/memblock.h:11,
from tests/common.h:8,
from tests/basic_api.h:5,
from main.c:2:
../../include/uapi/linux/const.h:31: note: this is the location of the previous definition
31 | #define __ALIGN_KERNEL(x, a) __ALIGN_KERNEL_MASK(x, (__typeof__(x))(a) - 1)
|
Remove definitions of __ALIGN_KERNEL and __ALIGN_KERNEL_MASK from
tools/include/linux/mm.h to fix it.
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 69343ce914 ]
Change the logging of each algorithm from info level to debug level.
On the original devices supported by this code there were typically only
one or two algorithms in a firmware and one or two DSPs so this logging
only used a small number of log lines.
However, for the latest devices there could be 30-40 algorithms in a
firmware and 8 DSPs being loaded in parallel, so using 300+ lines of log
for information that isn't particularly important to have logged.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230913160523.3701189-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a479b44ac0 ]
The ACPI setting for a GPIO default state has higher priority than the
flag passed to devm_gpiod_get_optional() so ACPI can override the
GPIOD_OUT_LOW. Explicitly set the GPIO low when hard resetting.
Although GPIOD_OUT_LOW can't be relied on this doesn't seem like a
reason to stop passing it to devm_gpiod_get_optional(). So we still pass
it to state our intent, but can deal with it having no effect.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230913150012.604775-3-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 485ddd519f ]
Use consistently u8 for sdw link index. The id is limited to 4, u8 is
adequate in size to store it.
This change will also fixes the following compiler warning/error (W=1):
sound/hda/intel-sdw-acpi.c: In function ‘sdw_intel_acpi_scan’:
sound/hda/intel-sdw-acpi.c:34:35: error: ‘-subproperties’ directive output may be truncated writing 14 bytes into a region of size between 7 and 17 [-Werror=format-truncation=]
34 | "mipi-sdw-link-%d-subproperties", i);
| ^~~~~~~~~~~~~~
In function ‘is_link_enabled’,
inlined from ‘sdw_intel_scan_controller’ at sound/hda/intel-sdw-acpi.c:106:8,
inlined from ‘sdw_intel_acpi_scan’ at sound/hda/intel-sdw-acpi.c:180:9:
sound/hda/intel-sdw-acpi.c:33:9: note: ‘snprintf’ output between 30 and 40 bytes into a destination of size 32
33 | snprintf(name, sizeof(name),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
34 | "mipi-sdw-link-%d-subproperties", i);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
The warnings got brought to light by a recent patch upstream:
commit 6d4ab2e97d ("extrawarn: enable format and stringop overflow warnings in W=1")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230912162617.29178-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7cb779a686 ]
Commit 151e887d8f ("veth: Fixing transmit return status for dropped
packets") exposed the fact that bpf_clone_redirect is capable of
returning raw NET_XMIT_XXX return codes.
This is in the conflict with its UAPI doc which says the following:
"0 on success, or a negative error in case of failure."
Update the UAPI to reflect the fact that bpf_clone_redirect can
return positive error numbers, but don't explicitly define
their meaning.
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230911194731.286342-1-sdf@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2f9426905a ]
The rpmsg pcm device is a device which should support
double buffering.
Found this issue with pipewire. When there is no
SNDRV_PCM_INFO_BATCH flag in driver, the pipewire will
set headroom to be zero, and because rpmsg pcm device
don't support residue report, when the latency setting
is small, the "delay" always larger than "target" in
alsa-pcm.c, that reading next period data is not
scheduled on time.
With SNDRV_PCM_INFO_BATCH flag in driver, the pipewire
will select a smaller period size for device, then
the task of reading next period data will be scheduled
on time.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1694414287-13291-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 80cc944eca ]
ata_scsi_port_error_handler() starts off by clearing ATA_PFLAG_EH_PENDING,
before calling ap->ops->error_handler() (without holding the ap->lock).
If an error IRQ is received while ap->ops->error_handler() is running,
the irq handler will set ATA_PFLAG_EH_PENDING.
Once ap->ops->error_handler() returns, ata_scsi_port_error_handler()
checks if ATA_PFLAG_EH_PENDING is set, and if it is, another iteration
of ATA EH is performed.
The problem is that ATA_PFLAG_EH_PENDING is not only cleared by
ata_scsi_port_error_handler(), it is also cleared by ata_eh_reset().
ata_eh_reset() is called by ap->ops->error_handler(). This additional
clearing done by ata_eh_reset() breaks the whole retry logic in
ata_scsi_port_error_handler(). Thus, if an error IRQ is received while
ap->ops->error_handler() is running, the port will currently remain
frozen and will never get re-enabled.
The additional clearing in ata_eh_reset() was introduced in commit
1e641060c4 ("libata: clear eh_info on reset completion").
Looking at the original error report:
https://marc.info/?l=linux-ide&m=124765325828495&w=2
We can see the following happening:
[ 1.074659] ata3: XXX port freeze
[ 1.074700] ata3: XXX hardresetting link, stopping engine
[ 1.074746] ata3: XXX flipping SControl
[ 1.411471] ata3: XXX irq_stat=400040 CONN|PHY
[ 1.411475] ata3: XXX port freeze
[ 1.420049] ata3: XXX starting engine
[ 1.420096] ata3: XXX rc=0, class=1
[ 1.420142] ata3: XXX clearing IRQs for thawing
[ 1.420188] ata3: XXX port thawed
[ 1.420234] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
We are not supposed to be able to receive an error IRQ while the port is
frozen (PxIE is set to 0, i.e. all IRQs for the port are disabled).
AHCI 1.3.1 section 10.7.1.1 First Tier (IS Register) states:
"Each bit location can be thought of as reporting a '1' if the virtual
"interrupt line" for that port is indicating it wishes to generate an
interrupt. That is, if a port has one or more interrupt status bit set,
and the enables for those status bits are set, then this bit shall be set."
Additionally, AHCI state P:ComInit clearly shows that the state machine
will only jump to P:ComInitSetIS (which sets IS.IPS(x) to '1'), if PxIE.PCE
is set to '1'. In our case, PxIE is set to 0, so IS.IPS(x) won't get set.
So IS.IPS(x) only gets set if PxIS and PxIE is set.
AHCI 1.3.1 section 10.7.1.1 First Tier (IS Register) also states:
"The bits in this register are read/write clear. It is set by the level of
the virtual interrupt line being a set, and cleared by a write of '1' from
the software."
So if IS.IPS(x) is set, you need to explicitly clear it by writing a 1 to
IS.IPS(x) for that port.
Since PxIE is cleared, the only way to get an interrupt while the port is
frozen, is if IS.IPS(x) is set, and the only way IS.IPS(x) can be set when
the port is frozen, is if it was set before the port was frozen.
However, since commit 737dd811a3 ("ata: libahci: clear pending interrupt
status"), we clear both PxIS and IS.IPS(x) after freezing the port, but
before the COMRESET, so the problem that commit 1e641060c4 ("libata:
clear eh_info on reset completion") fixed can no longer happen.
Thus, revert commit 1e641060c4 ("libata: clear eh_info on reset
completion"), so that the retry logic in ata_scsi_port_error_handler()
works once again. (The retry logic is still needed, since we can still
get an error IRQ _after_ the port has been thawed, but before
ata_scsi_port_error_handler() takes the ap->lock in order to check
if ATA_PFLAG_EH_PENDING is set.)
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ebc3d4e44a ]
checkpatch flagged a few places with:
WARNING: ENOTSUPP is not a SUSV4 error code, prefer EOPNOTSUPP
Also fixed minor typo
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5e7e822542 ]
On some APU systems, there is no atom context and so the
atom_context struct is null.
Add a check to the VBIOS_INFO branch of amdgpu_info_ioctl
to handle this case, returning all zeroes.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f5b2c10b57 ]
[Why]
Currently the driver looks DCN registers to access if BL is on or not.
This check is not valid if we are using AUX based brightness control.
This causes driver to not send out "backlight off" command during power off
sequence as it already thinks it is off.
[How]
Only check DCN registers if we aren't using AUX based brightness control.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Swapnil Patel <swapnil.patel@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a81cf96f5 ]
for_each_child_of_node performs an of_node_get on each
iteration, so a break out of the loop requires an
of_node_put.
This was done using the Coccinelle semantic patch
iterators/for_each_child.cocci
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e97eb65dd4 ]
snprintf() returns the "number of characters which *would* be generated for
the given input", not the size *really* generated.
In order to avoid too large values for 'o' (and potential negative values
for "sizeof(linebuf) o") use scnprintf() instead of snprintf().
Note that given the "w < 4" in the for loop, the buffer can NOT
overflow, but using the *right* function is always better.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6912e72483 ]
In the macro SMC_STAT_SERV_SUCC_INC, the smcd_version is used
to determin whether to increase the v1 statistic or the v2
statistic. It is correct for SMCD. But for SMCR, smcr_version
should be used.
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 95a404bd60 ]
When iterating over the ring buffer while the ring buffer is active, the
writer can corrupt the reader. There's barriers to help detect this and
handle it, but that code missed the case where the last event was at the
very end of the page and has only 4 bytes left.
The checks to detect the corruption by the writer to reads needs to see the
length of the event. If the length in the first 4 bytes is zero then the
length is stored in the second 4 bytes. But if the writer is in the process
of updating that code, there's a small window where the length in the first
4 bytes could be zero even though the length is only 4 bytes. That will
cause rb_event_length() to read the next 4 bytes which could happen to be off the
allocated page.
To protect against this, fail immediately if the next event pointer is
less than 8 bytes from the end of the commit (last byte of data), as all
events must be a minimum of 8 bytes anyway.
Link: https://lore.kernel.org/all/20230905141245.26470-1-Tze-nan.Wu@mediatek.com/
Link: https://lore.kernel.org/linux-trace-kernel/20230907122820.0899019c@gandalf.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Reported-by: Tze-nan Wu <Tze-nan.Wu@mediatek.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f9dd2e896 ]
This patch fixes inconsistencies in the parsing rules of the levels 1
and 2 of the kselftest_deps.sh. It was added the levels 4 and 5 to
account for a few edge cases that are present in some tests, also some
minor identation styling have been fixed (s/ /\t/g).
Signed-off-by: Ricardo B. Marliere <rbmarliere@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a57c2d4e46 ]
When removing a delayed item, or releasing which will remove it as well,
we will modify one of the delayed node's rbtrees and item counter if the
delayed item is in one of the rbtrees. This require having the delayed
node's mutex locked, otherwise we will race with other tasks modifying
the rbtrees and the counter.
This is motivated by a previous version of another patch actually calling
btrfs_release_delayed_item() after unlocking the delayed node's mutex and
against a delayed item that is in a rbtree.
So assert at __btrfs_remove_delayed_item() that the delayed node's mutex
is locked.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f6bd2c9248 ]
When user resize all trace ring buffer through file 'buffer_size_kb',
then in ring_buffer_resize(), kernel allocates buffer pages for each
cpu in a loop.
If the kernel preemption model is PREEMPT_NONE and there are many cpus
and there are many buffer pages to be allocated, it may not give up cpu
for a long time and finally cause a softlockup.
To avoid it, call cond_resched() after each cpu buffer allocation.
Link: https://lore.kernel.org/linux-trace-kernel/20230906081930.3939106-1-zhengyejian1@huawei.com
Cc: <mhiramat@kernel.org>
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f4e4ada586 ]
Function instance_set() expects to enable event 'sched_switch', so we
should set 1 to its 'enable' file.
Testcase passed after this patch:
# ./ftracetest test.d/instances/instance-event.tc
=== Ftrace unit tests ===
[1] Test creation and deletion of trace instances while setting an event
[PASS]
# of passed: 1
# of failed: 0
# of unresolved: 0
# of untested: 0
# of unsupported: 0
# of xfailed: 0
# of undefined(test bug): 0
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d32533d30e ]
With auto hibern8 enabled, UIC could be busy processing a hibern8 operation
and the HCI would reports UIC not ready for a short while through
HCS.UCRDY. The UFS driver doesn't currently handle this situation. The
UFSHCI spec specifies UCRDY like this: whether the host controller is ready
to process UIC COMMAND
The 'ready' could be seen as many different meanings. If the meaning
includes not processing any request from HCI, processing a hibern8
operation can be 'not ready'. In this situation, the driver needs to wait
until the operations is completed.
Signed-off-by: Kiwoong Kim <kwmad.kim@samsung.com>
Link: https://lore.kernel.org/r/550484ffb66300bdcec63d3e304dfd55cb432f1f.1693790060.git.kwmad.kim@samsung.com
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Chanwoo Lee <cw9316.lee@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eb3255ee8f ]
Fix this makecheck warning:
drivers/parisc/sba_iommu.c:98:19: warning: symbol 'sba_list'
was not declared. Should it be static?
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ae5b3a685 ]
The nvme_fc_fcp_op structure describing an AEN operation is initialized with a
null request structure pointer. An FC LLDD may make a call to
nvme_fc_io_getuuid passing a pointer to an nvmefc_fcp_req for an AEN operation.
Add validation of the request structure pointer before dereference.
Signed-off-by: Nigel Kirkland <nkirkland2304@gmail.com>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1f11f4202c ]
Previously the transfer complete IRQ immediately drained to RX FIFO to
read any data remaining in FIFO to the RX buffer. This behaviour is
correct when dealing with SPI in interrupt mode. However in DMA mode the
transfer complete interrupt still fires as soon as all bytes to be
transferred have been stored in the FIFO. At that point data in the FIFO
still needs to be picked up by the DMA engine. Thus the drain procedure
and DMA engine end up racing to read from RX FIFO, corrupting any data
read. Additionally the RX buffer pointer is never adjusted according to
DMA progress in DMA mode, thus calling the RX FIFO drain procedure in DMA
mode is a bug.
Fix corruptions in DMA RX mode by draining RX FIFO only in interrupt mode.
Also wait for completion of RX DMA when in DMA mode before returning to
ensure all data has been copied to the supplied memory buffer.
Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
Link: https://lore.kernel.org/r/20230827152558.5368-3-t.schramm@manjaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 171f8a49f2 ]
Through empirical testing it has been determined that sometimes RX SPI
transfers with DMA enabled return corrupted data. This is down to single
or even multiple bytes lost during DMA transfer from SPI peripheral to
memory. It seems the RX FIFO within the SPI peripheral can become
confused when performing bus read accesses wider than a single byte to it
during an active SPI transfer.
This patch reduces the width of individual DMA read accesses to the
RX FIFO to a single byte to mitigate that issue.
Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
Link: https://lore.kernel.org/r/20230827152558.5368-2-t.schramm@manjaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6a86b5b5cd ]
syzbot reported a data race splat between two processes trying to
update the same BPF map value via syscall on different CPUs:
BUG: KCSAN: data-race in bpf_percpu_array_update / bpf_percpu_array_update
write to 0xffffe8fffe7425d8 of 8 bytes by task 8257 on cpu 1:
bpf_long_memcpy include/linux/bpf.h:428 [inline]
bpf_obj_memcpy include/linux/bpf.h:441 [inline]
copy_map_value_long include/linux/bpf.h:464 [inline]
bpf_percpu_array_update+0x3bb/0x500 kernel/bpf/arraymap.c:380
bpf_map_update_value+0x190/0x370 kernel/bpf/syscall.c:175
generic_map_update_batch+0x3ae/0x4f0 kernel/bpf/syscall.c:1749
bpf_map_do_batch+0x2df/0x3d0 kernel/bpf/syscall.c:4648
__sys_bpf+0x28a/0x780
__do_sys_bpf kernel/bpf/syscall.c:5241 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5239 [inline]
__x64_sys_bpf+0x43/0x50 kernel/bpf/syscall.c:5239
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
write to 0xffffe8fffe7425d8 of 8 bytes by task 8268 on cpu 0:
bpf_long_memcpy include/linux/bpf.h:428 [inline]
bpf_obj_memcpy include/linux/bpf.h:441 [inline]
copy_map_value_long include/linux/bpf.h:464 [inline]
bpf_percpu_array_update+0x3bb/0x500 kernel/bpf/arraymap.c:380
bpf_map_update_value+0x190/0x370 kernel/bpf/syscall.c:175
generic_map_update_batch+0x3ae/0x4f0 kernel/bpf/syscall.c:1749
bpf_map_do_batch+0x2df/0x3d0 kernel/bpf/syscall.c:4648
__sys_bpf+0x28a/0x780
__do_sys_bpf kernel/bpf/syscall.c:5241 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5239 [inline]
__x64_sys_bpf+0x43/0x50 kernel/bpf/syscall.c:5239
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
value changed: 0x0000000000000000 -> 0xfffffff000002788
The bpf_long_memcpy is used with 8-byte aligned pointers, power-of-8 size
and forced to use long read/writes to try to atomically copy long counters.
It is best-effort only and no barriers are here since it _will_ race with
concurrent updates from BPF programs. The bpf_long_memcpy() is called from
bpf(2) syscall. Marco suggested that the best way to make this known to
KCSAN would be to use data_race() annotation.
Reported-by: syzbot+97522333291430dd277f@syzkaller.appspotmail.com
Suggested-by: Marco Elver <elver@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Marco Elver <elver@google.com>
Link: https://lore.kernel.org/bpf/000000000000d87a7f06040c970c@google.com
Link: https://lore.kernel.org/bpf/57628f7a15e20d502247c3b55fceb1cb2b31f266.1693342186.git.daniel@iogearbox.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e3dfcab208 ]
When unmounting all the dirty buffers will be flushed and after
the last osd request is finished the last reference of the i_count
will be released. Then it will flush the dirty cap/snap to MDSs,
and the unmounting won't wait the possible acks, which will ihold
the inodes when updating the metadata locally but makes no sense
any more, of this. This will make the evict_inodes() to skip these
inodes.
If encrypt is enabled the kernel generate a warning when removing
the encrypt keys when the skipped inodes still hold the keyring:
WARNING: CPU: 4 PID: 168846 at fs/crypto/keyring.c:242 fscrypt_destroy_keyring+0x7e/0xd0
CPU: 4 PID: 168846 Comm: umount Tainted: G S 6.1.0-rc5-ceph-g72ead199864c #1
Hardware name: Supermicro SYS-5018R-WR/X10SRW-F, BIOS 2.0 12/17/2015
RIP: 0010:fscrypt_destroy_keyring+0x7e/0xd0
RSP: 0018:ffffc9000b277e28 EFLAGS: 00010202
RAX: 0000000000000002 RBX: ffff88810d52ac00 RCX: ffff88810b56aa00
RDX: 0000000080000000 RSI: ffffffff822f3a09 RDI: ffff888108f59000
RBP: ffff8881d394fb88 R08: 0000000000000028 R09: 0000000000000000
R10: 0000000000000001 R11: 11ff4fe6834fcd91 R12: ffff8881d394fc40
R13: ffff888108f59000 R14: ffff8881d394f800 R15: 0000000000000000
FS: 00007fd83f6f1080(0000) GS:ffff88885fd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f918d417000 CR3: 000000017f89a005 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
generic_shutdown_super+0x47/0x120
kill_anon_super+0x14/0x30
ceph_kill_sb+0x36/0x90 [ceph]
deactivate_locked_super+0x29/0x60
cleanup_mnt+0xb8/0x140
task_work_run+0x67/0xb0
exit_to_user_mode_prepare+0x23d/0x240
syscall_exit_to_user_mode+0x25/0x60
do_syscall_64+0x40/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fd83dc39e9b
Later the kernel will crash when iput() the inodes and dereferencing
the "sb->s_master_keys", which has been released by the
generic_shutdown_super().
Link: https://tracker.ceph.com/issues/59162
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b23c83ad2c ]
VMCLEAR active VMCSes before any emergency reboot, not just if the kernel
may kexec into a new kernel after a crash. Per Intel's SDM, the VMX
architecture doesn't require the CPU to flush the VMCS cache on INIT. If
an emergency reboot doesn't RESET CPUs, cached VMCSes could theoretically
be kept and only be written back to memory after the new kernel is booted,
i.e. could effectively corrupt memory after reboot.
Opportunistically remove the setting of the global pointer to NULL to make
checkpatch happy.
Cc: Andrew Cooper <Andrew.Cooper3@citrix.com>
Link: https://lore.kernel.org/r/20230721201859.2307736-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 92e73d807b ]
Sometimes, our completions race with new master transfers and override
the bus->operation and bus->master_or_slave variables. This causes
transactions to timeout and kernel crashes less frequently.
To remedy this, we re-order all completions to the very end of the
function.
Fixes: 56a1485b10 ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver")
Signed-off-by: William A. Kennington III <william@wkennington.com>
Reviewed-by: Tali Perry <tali.perry1@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
