[ Upstream commit c511a9c12674d246916bb16c479d496b76983193 ]
Clang Static Checker (scan-build) warns:
drivers/net/wireless/ath/ath10k/debugfs_sta.c:line 429, column 3
Value stored to 'ret' is never read.
Return 'ret' rather than 'count' when 'ret' stores an error code.
Fixes: ee8b08a1be ("ath10k: add debugfs support to get per peer tids log via tracing")
Signed-off-by: Su Hui <suhui@nfschina.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240422034243.938962-1-suhui@nfschina.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d998ddc86a27c92140b9f7984ff41e3d1d07a48f ]
compute_intercept_slope() is called from calibrate_8960() (in tsens-8960.c)
as compute_intercept_slope(priv, p1, NULL, ONE_PT_CALIB) which lead to null
pointer dereference (if DEBUG or DYNAMIC_DEBUG set).
Fix this bug by adding null pointer check.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: dfc1193d4d ("thermal/drivers/tsens: Replace custom 8960 apis with generic apis")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240411114021.12203-1-amishin@t-argos.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cba786af84a0f9716204e09f518ce3b7ada8555e ]
On x86, the ordinary, position dependent small and kernel code models
only support placement of the executable in 32-bit addressable memory,
due to the use of 32-bit signed immediates to generate references to
global variables. For the kernel, this implies that all global variables
must reside in the top 2 GiB of the kernel virtual address space, where
the implicit address bits 63:32 are equal to sign bit 31.
This means the kernel code model is not suitable for other bare metal
executables such as the kexec purgatory, which can be placed arbitrarily
in the physical address space, where its address may no longer be
representable as a sign extended 32-bit quantity. For this reason,
commit
e16c2983fb ("x86/purgatory: Change compiler flags from -mcmodel=kernel to -mcmodel=large to fix kexec relocation errors")
switched to the large code model, which uses 64-bit immediates for all
symbol references, including function calls, in order to avoid relying
on any assumptions regarding proximity of symbols in the final
executable.
The large code model is rarely used, clunky and the least likely to
operate in a similar fashion when comparing GCC and Clang, so it is best
avoided. This is especially true now that Clang 18 has started to emit
executable code in two separate sections (.text and .ltext), which
triggers an issue in the kexec loading code at runtime.
The SUSE bugzilla fixes tag points to gcc 13 having issues with the
large model too and that perhaps the large model should simply not be
used at all.
Instead, use the position independent small code model, which makes no
assumptions about placement but only about proximity, where all
referenced symbols must be within -/+ 2 GiB, i.e., in range for a
RIP-relative reference. Use hidden visibility to suppress the use of a
GOT, which carries absolute addresses that are not covered by static ELF
relocations, and is therefore incompatible with the kexec loader's
relocation logic.
[ bp: Massage commit message. ]
Fixes: e16c2983fb ("x86/purgatory: Change compiler flags from -mcmodel=kernel to -mcmodel=large to fix kexec relocation errors")
Fixes: https://bugzilla.suse.com/show_bug.cgi?id=1211853
Closes: https://github.com/ClangBuiltLinux/linux/issues/2016
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Fangrui Song <maskray@google.com>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/all/20240417-x86-fix-kexec-with-llvm-18-v1-0-5383121e8fb7@kernel.org/
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 504e2bed5d50610c1836046c0c195b0a6dba9c72 ]
struct Scsi_Host private data contains pointer to struct ctlr_info.
Restore allocation of only 8 bytes to store pointer in struct Scsi_Host
private data area.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: bbbd254991 ("scsi: hpsa: Fix allocation size for scsi_host_alloc()")
Signed-off-by: Yuri Karpov <YKarpov@ispras.ru>
Link: https://lore.kernel.org/r/20240312170447.743709-1-YKarpov@ispras.ru
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 06036a0a5db34642c5dbe22021a767141f010b7a ]
As of commit 7d1d865181 ("[SCSI] libsas: fix false positive 'device
attached' conditions"), reset the phy->entacted_sas_addr address to a
zero-address when the link rate is less than 1.5G.
Currently we find that when a new device is attached, and the link rate is
less than 1.5G, but the device type is not NO_DEVICE, for example: the link
rate is SAS_PHY_RESET_IN_PROGRESS and the device type is stp. After setting
the phy->entacted_sas_addr address to the zero address, the port will
continue to be created for the phy with the zero-address, and other phys
with the zero-address will be tried to be added to the new port:
[562240.051197] sas: ex 500e004aaaaaaa1f phy19:U:0 attached: 0000000000000000 (no device)
// phy19 is deleted but still on the parent port's phy_list
[562240.062536] sas: ex 500e004aaaaaaa1f phy0 new device attached
[562240.062616] sas: ex 500e004aaaaaaa1f phy00:U:5 attached: 0000000000000000 (stp)
[562240.062680] port-7:7:0: trying to add phy phy-7:7:19 fails: it's already part of another port
Therefore, it should be the same as sas_get_phy_attached_dev(). Only when
device_type is SAS_PHY_UNUSED, sas_address is set to the 0 address.
Fixes: 7d1d865181 ("[SCSI] libsas: fix false positive 'device attached' conditions")
Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Link: https://lore.kernel.org/r/20240312141103.31358-5-yangxingui@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cf7de25878a1f4508c69dc9f6819c21ba177dbfe ]
cppc_cpufreq_get_rate() and hisi_cppc_cpufreq_get_rate() can be called from
different places with various parameters. So cpufreq_cpu_get() can return
null as 'policy' in some circumstances.
Fix this bug by adding null return check.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: a28b2bfc09 ("cppc_cpufreq: replace per-cpu data array with a list")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 50aee97d15113b95a68848db1f0cb2a6c09f753a ]
We've observed a 7-12% performance regression in iperf3 UDP ipv4 and
ipv6 tests with multiple sockets on Zen3 cpus, which we traced back to
commit f0ea27e7bf ("udp: re-score reuseport groups when connected
sockets are present"). The failing tests were those that would spawn
UDP sockets per-cpu on systems that have a high number of cpus.
Unsurprisingly, it is not caused by the extra re-scoring of the reused
socket, but due to the compiler no longer inlining compute_score, once
it has the extra call site in udp4_lib_lookup2. This is augmented by
the "Safe RET" mitigation for SRSO, needed in our Zen3 cpus.
We could just explicitly inline it, but compute_score() is quite a large
function, around 300b. Inlining in two sites would almost double
udp4_lib_lookup2, which is a silly thing to do just to workaround a
mitigation. Instead, this patch shuffles the code a bit to avoid the
multiple calls to compute_score. Since it is a static function used in
one spot, the compiler can safely fold it in, as it did before, without
increasing the text size.
With this patch applied I ran my original iperf3 testcases. The failing
cases all looked like this (ipv4):
iperf3 -c 127.0.0.1 --udp -4 -f K -b $R -l 8920 -t 30 -i 5 -P 64 -O 2
where $R is either 1G/10G/0 (max, unlimited). I ran 3 times each.
baseline is v6.9-rc3. harmean == harmonic mean; CV == coefficient of
variation.
ipv4:
1G 10G MAX
HARMEAN (CV) HARMEAN (CV) HARMEAN (CV)
baseline 1743852.66(0.0208) 1725933.02(0.0167) 1705203.78(0.0386)
patched 1968727.61(0.0035) 1962283.22(0.0195) 1923853.50(0.0256)
ipv6:
1G 10G MAX
HARMEAN (CV) HARMEAN (CV) HARMEAN (CV)
baseline 1729020.03(0.0028) 1691704.49(0.0243) 1692251.34(0.0083)
patched 1900422.19(0.0067) 1900968.01(0.0067) 1568532.72(0.1519)
This restores the performance we had before the change above with this
benchmark. We obviously don't expect any real impact when mitigations
are disabled, but just to be sure it also doesn't regresses:
mitigations=off ipv4:
1G 10G MAX
HARMEAN (CV) HARMEAN (CV) HARMEAN (CV)
baseline 3230279.97(0.0066) 3229320.91(0.0060) 2605693.19(0.0697)
patched 3242802.36(0.0073) 3239310.71(0.0035) 2502427.19(0.0882)
Cc: Lorenz Bauer <lmb@isovalent.com>
Fixes: f0ea27e7bf ("udp: re-score reuseport groups when connected sockets are present")
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0f495f7617 ]
There are currently four copies of reuseport_lookup: one each for
(TCP, UDP)x(IPv4, IPv6). This forces us to duplicate all callers of
those functions as well. This is already the case for sk_lookup
helpers (inet,inet6,udp4,udp6)_lookup_run_bpf.
There are two differences between the reuseport_lookup helpers:
1. They call different hash functions depending on protocol
2. UDP reuseport_lookup checks that sk_state != TCP_ESTABLISHED
Move the check for sk_state into the caller and use the INDIRECT_CALL
infrastructure to cut down the helpers to one per IP version.
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Lorenz Bauer <lmb@isovalent.com>
Link: https://lore.kernel.org/r/20230720-so-reuseport-v6-4-7021b683cdae@isovalent.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Stable-dep-of: 50aee97d1511 ("udp: Avoid call to compute_score on multiple sites")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5bc8b0f5dac04cd4ebe47f8090a5942f2f2647ef ]
When running as Xen PV guest in some cases W^X violation WARN()s have
been observed. Those WARN()s are produced by verify_rwx(), which looks
into the PTE to verify that writable kernel pages have the NX bit set
in order to avoid code modifications of the kernel by rogue code.
As the NX bits of all levels of translation entries are or-ed and the
RW bits of all levels are and-ed, looking just into the PTE isn't enough
for the decision that a writable page is executable, too.
When running as a Xen PV guest, the direct map PMDs and kernel high
map PMDs share the same set of PTEs. Xen kernel initialization will set
the NX bit in the direct map PMD entries, and not the shared PTEs.
Fixes: 652c5bf380 ("x86/mm: Refuse W^X violations")
Reported-by: Jason Andryuk <jandryuk@gmail.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240412151258.9171-5-jgross@suse.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 02eac06b820c3eae73e5736ae62f986d37fed991 ]
Modify _lookup_address_cpa() to no longer use lookup_address(), but
only lookup_address_in_pgd().
This is done in preparation of using lookup_address_in_pgd_attr().
No functional change intended.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240412151258.9171-4-jgross@suse.com
Stable-dep-of: 5bc8b0f5dac0 ("x86/pat: Fix W^X violation false-positives when running as Xen PV guest")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ceb647b4b529fdeca9021cd34486f5a170746bda ]
Add lookup_address_in_pgd_attr() doing the same as the already
existing lookup_address_in_pgd(), but returning the effective settings
of the NX and RW bits of all walked page table levels, too.
This will be needed in order to match hardware behavior when looking
for effective access rights, especially for detecting writable code
pages.
In order to avoid code duplication, let lookup_address_in_pgd() call
lookup_address_in_pgd_attr() with dummy parameters.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240412151258.9171-2-jgross@suse.com
Stable-dep-of: 5bc8b0f5dac0 ("x86/pat: Fix W^X violation false-positives when running as Xen PV guest")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b8f85833c05730d631576008daaa34096bc7f3ce ]
The exit() callback is optional and shouldn't be called without checking
a valid pointer first.
Also, we must clear freq_table pointer even if the exit() callback isn't
present.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Fixes: 91a12e91dc ("cpufreq: Allow light-weight tear down and bring up of CPUs")
Fixes: f339f35417 ("cpufreq: Rearrange locking in cpufreq_remove_dev()")
Reported-by: Lizhe <sensor1010@163.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a0025f587c685e5ff842fb0194036f2ca0b6eaf4 ]
The early 64-bit boot code must be entered with a 1:1 mapping of the
bootable image, but it cannot operate without a 1:1 mapping of all the
assets in memory that it accesses, and therefore, it creates such
mappings for all known assets upfront, and additional ones on demand
when a page fault happens on a memory address.
These mappings are created with the global bit G set, as the flags used
to create page table descriptors are based on __PAGE_KERNEL_LARGE_EXEC
defined by the core kernel, even though the context where these mappings
are used is very different.
This means that the TLB maintenance carried out by the decompressor is
not sufficient if it is entered with CR4.PGE enabled, which has been
observed to happen with the stage0 bootloader of project Oak. While this
is a dubious practice if no global mappings are being used to begin
with, the decompressor is clearly at fault here for creating global
mappings and not performing the appropriate TLB maintenance.
Since commit:
f97b67a773 ("x86/decompressor: Only call the trampoline when changing paging levels")
CR4 is no longer modified by the decompressor if no change in the number
of paging levels is needed. Before that, CR4 would always be set to a
consistent value with PGE cleared.
So let's reinstate a simplified version of the original logic to put CR4
into a known state, and preserve the PAE, MCE and LA57 bits, none of
which can be modified freely at this point (PAE and LA57 cannot be
changed while running in long mode, and MCE cannot be cleared when
running under some hypervisors).
This effectively clears PGE and works around the project Oak bug.
Fixes: f97b67a773 ("x86/decompressor: Only call the trampoline when ...")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lore.kernel.org/r/20240410151354.506098-2-ardb+git@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5d9231111966b6c5a65016d58dcbeab91055bc91 ]
Commit 3e11e53041 tries to suppress dlm_lock() lock conversion errors
that occur when the lockspace has already been released.
It does that by setting and checking the SDF_SKIP_DLM_UNLOCK flag. This
conflicts with the intended meaning of the SDF_SKIP_DLM_UNLOCK flag, so
check whether the lockspace is still allocated instead.
(Given the current DLM API, checking for this kind of error after the
fact seems easier that than to make sure that the lockspace is still
allocated before calling dlm_lock(). Changing the DLM API so that users
maintain the lockspace references themselves would be an option.)
Fixes: 3e11e53041 ("GFS2: ignore unlock failures after withdraw")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b01189333ee91c1ae6cd96dfd1e3a3c2e69202f0 ]
Commit fffe9bee14 ("gfs2: Delay withdraw from atomic context")
switched from gfs2_withdraw() to gfs2_withdraw_delayed() in
gfs2_ail_error(), but failed to then check if a delayed withdraw had
occurred. Fix that by adding the missing check in __gfs2_ail_flush(),
where the spin locks are already dropped and a withdraw is possible.
Fixes: fffe9bee14 ("gfs2: Delay withdraw from atomic context")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a3403d304708f60565582d60af4316289d0316a0 ]
gcc -Wstringop-truncation warns about copying a string that results in a
missing nul termination:
drivers/acpi/acpica/tbfind.c: In function 'acpi_tb_find_table':
drivers/acpi/acpica/tbfind.c:60:9: error: 'strncpy' specified bound 6 equals destination size [-Werror=stringop-truncation]
60 | strncpy(header.oem_id, oem_id, ACPI_OEM_ID_SIZE);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/acpi/acpica/tbfind.c:61:9: error: 'strncpy' specified bound 8 equals destination size [-Werror=stringop-truncation]
61 | strncpy(header.oem_table_id, oem_table_id, ACPI_OEM_TABLE_ID_SIZE);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The code works as intended, and the warning could be addressed by using
a memcpy(), but turning the warning off for this file works equally well
and may be easier to merge.
Fixes: 47c08729bf ("ACPICA: Fix for LoadTable operator, input strings")
Link: https://lore.kernel.org/lkml/CAJZ5v0hoUfv54KW7y4223Mn9E7D4xvR7whRFNLTBqCZMUxT50Q@mail.gmail.com/#t
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b327708798809328f21da8dc14cc8883d1e8a4b3 ]
When pch_msi_parent_domain_alloc() returns an error, there is an off-by-one
in the number of interrupts to be freed.
Fix it by passing the number of successfully allocated interrupts, instead of the
relative index of the last allocated one.
Fixes: 632dcc2c75 ("irqchip: Add Loongson PCH MSI controller")
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Link: https://lore.kernel.org/r/20240327142334.1098-1-yuzenghui@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ff3669a71afa06208de58d6bea1cc49d5e3fcbd1 ]
When alpine_msix_gic_domain_alloc() fails, there is an off-by-one in the
number of interrupts to be freed.
Fix it by passing the number of successfully allocated interrupts, instead
of the relative index of the last allocated one.
Fixes: 3841245e84 ("irqchip/alpine-msi: Fix freeing of interrupts on allocation error path")
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240327142305.1048-1-yuzenghui@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4bf3855497b60765ca03b983d064b25e99b97657 ]
Currently, the UIC_COMMAND_COMPL interrupt is disabled and a wmb() is used
to complete the register write before any following writes.
wmb() ensures the writes complete in that order, but completion doesn't
mean that it isn't stored in a buffer somewhere. The recommendation for
ensuring this bit has taken effect on the device is to perform a read back
to force it to make it all the way to the device. This is documented in
device-io.rst and a talk by Will Deacon on this can be seen over here:
https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678
Let's do that to ensure the bit hits the device. Because the wmb()'s
purpose wasn't to add extra ordering (on top of the ordering guaranteed by
writel()/readl()), it can safely be removed.
Fixes: d75f7fe495 ("scsi: ufs: reduce the interrupts for power mode change requests")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-9-181252004586@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e4a628877119bd40164a651d20321247b6f94a8b ]
Currently, interrupts are cleared and disabled prior to registering the
interrupt. An mb() is used to complete the clear/disable writes before the
interrupt is registered.
mb() ensures that the write completes, but completion doesn't mean that it
isn't stored in a buffer somewhere. The recommendation for ensuring these
bits have taken effect on the device is to perform a read back to force it
to make it all the way to the device. This is documented in device-io.rst
and a talk by Will Deacon on this can be seen over here:
https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678
Let's do that to ensure these bits hit the device. Because the mb()'s
purpose wasn't to add extra ordering (on top of the ordering guaranteed by
writel()/readl()), it can safely be removed.
Fixes: 199ef13cac ("scsi: ufs: avoid spurious UFS host controller interrupts")
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-8-181252004586@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b715c55daf598aac8fa339048e4ca8a0916b332e ]
Currently, HCLKDIV is written to and then completed with an mb().
mb() ensures that the write completes, but completion doesn't mean that it
isn't stored in a buffer somewhere. The recommendation for ensuring this
bit has taken effect on the device is to perform a read back to force it to
make it all the way to the device. This is documented in device-io.rst and
a talk by Will Deacon on this can be seen over here:
https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678
Let's do that to ensure the bit hits the device. Because the mb()'s purpose
wasn't to add extra ordering (on top of the ordering guaranteed by
writel()/readl()), it can safely be removed.
Fixes: d90996dae8 ("scsi: ufs: Add UFS platform driver for Cadence UFS")
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-6-181252004586@redhat.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d9488511b3ac7eb48a91bc5eded7027525525e03 ]
Currently, the CGC enable bit is written and then an mb() is used to ensure
that completes before continuing.
mb() ensures that the write completes, but completion doesn't mean that it
isn't stored in a buffer somewhere. The recommendation for ensuring this
bit has taken effect on the device is to perform a read back to force it to
make it all the way to the device. This is documented in device-io.rst and
a talk by Will Deacon on this can be seen over here:
https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678
Let's do that to ensure the bit hits the device. Because the mb()'s purpose
wasn't to add extra ordering (on top of the ordering guaranteed by
writel()/readl()), it can safely be removed.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Fixes: 81c0fc51b7 ("ufs-qcom: add support for Qualcomm Technologies Inc platforms")
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-5-181252004586@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 823150ecf04f958213cf3bf162187cd1a91c885c ]
Currently, the QUNIPRO_SEL bit is written to and then an mb() is used to
ensure that completes before continuing.
mb() ensures that the write completes, but completion doesn't mean that it
isn't stored in a buffer somewhere. The recommendation for ensuring this
bit has taken effect on the device is to perform a read back to force it to
make it all the way to the device. This is documented in device-io.rst and
a talk by Will Deacon on this can be seen over here:
https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678
But, there's really no reason to even ensure completion before
continuing. The only requirement here is that this write is ordered to this
endpoint (which readl()/writel() guarantees already). For that reason the
mb() can be dropped altogether without anything forcing completion.
Fixes: f06fcc7155 ("scsi: ufs-qcom: add QUniPro hardware support and power optimizations")
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-4-181252004586@redhat.com
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c02aa24bf ]
On SM8550, depending on the Qunipro, we can run with G5 or G4. For now,
when the major version is 5 or above, we go with G5. Therefore, we need to
specifically tell UFS HC that.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: 823150ecf04f ("scsi: ufs: qcom: Perform read back after writing unipro mode")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7959587f32 ]
On newer UFS revisions, the register at offset 0xD0 is called,
REG_UFS_PARAM0. Since the existing register, RETRY_TIMER_REG is not used
anywhere, it is safe to use the new name.
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Asutosh Das <quic_asutoshd@quicinc.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # Qdrive3/sa8540p-ride
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: 823150ecf04f ("scsi: ufs: qcom: Perform read back after writing unipro mode")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a862fafa263aea0f427d51aca6ff7fd9eeaaa8bd ]
Currently after writing to REG_UFS_SYS1CLK_1US a mb() is used to ensure
that write has gone through to the device.
mb() ensures that the write completes, but completion doesn't mean that it
isn't stored in a buffer somewhere. The recommendation for ensuring this
bit has taken effect on the device is to perform a read back to force it to
make it all the way to the device. This is documented in device-io.rst and
a talk by Will Deacon on this can be seen over here:
https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678
Let's do that to ensure the bit hits the device. Because the mb()'s purpose
wasn't to add extra ordering (on top of the ordering guaranteed by
writel()/readl()), it can safely be removed.
Fixes: f06fcc7155 ("scsi: ufs-qcom: add QUniPro hardware support and power optimizations")
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-2-181252004586@redhat.com
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c4d28e06b0c94636f6e35d003fa9ebac0a94e1ae ]
Currently, the reset bit for the UFS provided reset controller (used by its
phy) is written to, and then a mb() happens to try and ensure that hit the
device. Immediately afterwards a usleep_range() occurs.
mb() ensures that the write completes, but completion doesn't mean that it
isn't stored in a buffer somewhere. The recommendation for ensuring this
bit has taken effect on the device is to perform a read back to force it to
make it all the way to the device. This is documented in device-io.rst and
a talk by Will Deacon on this can be seen over here:
https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678
Let's do that to ensure the bit hits the device. By doing so and
guaranteeing the ordering against the immediately following usleep_range(),
the mb() can safely be removed.
Fixes: 81c0fc51b7 ("ufs-qcom: add support for Qualcomm Technologies Inc platforms")
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-1-181252004586@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f91717007217d975aa975ddabd91ae1a107b9bff ]
The struct bpf_fib_lookup is supposed to be of size 64. A recent commit
59b418c7063d ("bpf: Add a check for struct bpf_fib_lookup size") added
a static assertion to check this property so that future changes to the
structure will not accidentally break this assumption.
As it immediately turned out, on some 32-bit arm systems, when AEABI=n,
the total size of the structure was equal to 68, see [1]. This happened
because the bpf_fib_lookup structure contains a union of two 16-bit
fields:
union {
__u16 tot_len;
__u16 mtu_result;
};
which was supposed to compile to a 16-bit-aligned 16-bit field. On the
aforementioned setups it was instead both aligned and padded to 32-bits.
Declare this inner union as __attribute__((packed, aligned(2))) such
that it always is of size 2 and is aligned to 16 bits.
[1] https://lore.kernel.org/all/CA+G9fYtsoP51f-oP_Sp5MOq-Ffv8La2RztNpwvE6+R1VtFiLrw@mail.gmail.com/#t
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Fixes: e1850ea9bd ("bpf: bpf_fib_lookup return MTU value as output when looked up")
Signed-off-by: Anton Protopopov <aspsk@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240403123303.1452184-1-aspsk@isovalent.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 066afafc10c9476ee36c47c9062527a17e763901 ]
The carl9170_tx_release() function sometimes triggers a fortified-memset
warning in my randconfig builds:
In file included from include/linux/string.h:254,
from drivers/net/wireless/ath/carl9170/tx.c:40:
In function 'fortify_memset_chk',
inlined from 'carl9170_tx_release' at drivers/net/wireless/ath/carl9170/tx.c:283:2,
inlined from 'kref_put' at include/linux/kref.h:65:3,
inlined from 'carl9170_tx_put_skb' at drivers/net/wireless/ath/carl9170/tx.c:342:9:
include/linux/fortify-string.h:493:25: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning]
493 | __write_overflow_field(p_size_field, size);
Kees previously tried to avoid this by using memset_after(), but it seems
this does not fully address the problem. I noticed that the memset_after()
here is done on a different part of the union (status) than the original
cast was from (rate_driver_data), which may confuse the compiler.
Unfortunately, the memset_after() trick does not work on driver_rates[]
because that is part of an anonymous struct, and I could not get
struct_group() to do this either. Using two separate memset() calls
on the two members does address the warning though.
Fixes: fb5f6a0e80 ("mac80211: Use memset_after() to clear tx status")
Link: https://lore.kernel.org/lkml/20230623152443.2296825-1-arnd@kernel.org/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240328135509.3755090-2-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 72cc1980a0ef3ccad0d539e7dace63d0d7d432a4 ]
Commit 8238b45798 ("wait_on_bit: add an acquire memory barrier") added
a new bitop, test_bit_acquire(), with proper wrapping in order to try to
optimize it at compile-time, but missed the list of bitops used for
checking their prototypes a bit below.
The functions added have consistent prototypes, so that no more changes
are required and no functional changes take place.
Fixes: 8238b45798 ("wait_on_bit: add an acquire memory barrier")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a5535e5336943b33689f558199366102387b7bbf ]
When building with 64KB pages, clang points out that xsk->chunk_size
can never be PAGE_SIZE:
drivers/net/ethernet/mellanox/mlx5/core/en/xsk/setup.c:19:22: error: result of comparison of constant 65536 with expression of type 'u16' (aka 'unsigned short') is always false [-Werror,-Wtautological-constant-out-of-range-compare]
if (xsk->chunk_size > PAGE_SIZE ||
~~~~~~~~~~~~~~~ ^ ~~~~~~~~~
In older versions of this code, using PAGE_SIZE was the only
possibility, so this would have never worked on 64KB page kernels,
but the patch apparently did not address this case completely.
As Maxim Mikityanskiy suggested, 64KB chunks are really not all that
useful, so just shut up the warning by adding a cast.
Fixes: 282c0c798f ("net/mlx5e: Allow XSK frames smaller than a page")
Link: https://lore.kernel.org/netdev/20211013150232.2942146-1-arnd@kernel.org/
Link: https://lore.kernel.org/lkml/a7b27541-0ebb-4f2d-bd06-270a4d404613@app.fastmail.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240328143051.1069575-9-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 130b12079f ]
Current XSK prerequisites validation implementation
(setup.c/mlx5e_validate_xsk_param()) fails silently when xsk
prerequisites are not fulfilled.
Add error messages to the kernel log to help the user understand what
went wrong when params are not valid for XSK.
Signed-off-by: Adham Faris <afaris@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Stable-dep-of: a5535e533694 ("mlx5: stop warning for 64KB pages")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 954fd908f177604d4cce77e2a88cc50b29bad5ff ]
clang complains that the temporary string for the name passed into
alloc_workqueue() is too short for its contents:
drivers/net/ethernet/qlogic/qed/qed_main.c:1218:3: error: 'snprintf' will always be truncated; specified size is 16, but format string expands to at least 18 [-Werror,-Wformat-truncation]
There is no need for a temporary buffer, and the actual name of a workqueue
is 32 bytes (WQ_NAME_LEN), so just use the interface as intended to avoid
the truncation.
Fixes: 59ccf86fe6 ("qed: Add driver infrastucture for handling mfw requests.")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240326223825.4084412-4-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d0d4f1474e36b195eaad477373127ae621334c01 ]
The ACPI spec says bit 17 should be used to indicate support
for Generic Initiator Affinity Structure in SRAT, but we currently
set bit 13 ("Interrupt ResourceSource support").
Fix this by actually setting bit 17 when evaluating _OSC.
Fixes: 01aabca2fd ("ACPI: Let ACPI know we support Generic Initiator Affinity Structures")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be3a51e68f2f1b17250ce40d8872c7645b7a2991 ]
root_domain::overutilized is only used for EAS(energy aware scheduler)
to decide whether to do load balance or not. It is not used if EAS
not possible.
Currently enqueue_task_fair and task_tick_fair accesses, sometime updates
this field. In update_sd_lb_stats it is updated often. This causes cache
contention due to true sharing and burns a lot of cycles. ::overload and
::overutilized are part of the same cacheline. Updating it often invalidates
the cacheline. That causes access to ::overload to slow down due to
false sharing. Hence add EAS check before accessing/updating this field.
EAS check is optimized at compile time or it is a static branch.
Hence it shouldn't cost much.
With the patch, both enqueue_task_fair and newidle_balance don't show
up as hot routines in perf profile.
6.8-rc4:
7.18% swapper [kernel.vmlinux] [k] enqueue_task_fair
6.78% s [kernel.vmlinux] [k] newidle_balance
+patch:
0.14% swapper [kernel.vmlinux] [k] enqueue_task_fair
0.00% swapper [kernel.vmlinux] [k] newidle_balance
While at it: trace_sched_overutilized_tp expect that second argument to
be bool. So do a int to bool conversion for that.
Fixes: 2802bf3cd9 ("sched/fair: Add over-utilization/tipping point indicator")
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Qais Yousef <qyousef@layalina.io>
Reviewed-by: Srikar Dronamraju <srikar@linux.ibm.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20240307085725.444486-2-sshegde@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 76e9762d66373354b45c33b60e9a53ef2a3c5ff2 ]
Commit:
aaa8736370db ("x86, relocs: Ignore relocations in .notes section")
... only started ignoring the .notes sections in print_absolute_relocs(),
but the same logic should also by applied in walk_relocs() to avoid
such relocations.
[ mingo: Fixed various typos in the changelog, removed extra curly braces from the code. ]
Fixes: aaa8736370db ("x86, relocs: Ignore relocations in .notes section")
Fixes: 5ead97c84f ("xen: Core Xen implementation")
Fixes: da1a679cde ("Add /sys/kernel/notes")
Signed-off-by: Guixiong Wei <weiguixiong@bytedance.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20240317150547.24910-1-weiguixiong@bytedance.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 01296b39d3515f20a1db64d3c421c592b1e264a0 ]
Currently we force enable power save on non-running vdevs, this results
in unexpected ping latency in below scenarios:
1. disable power save from userspace.
2. trigger suspend/resume.
With step 1 power save is disabled successfully and we get a good latency:
PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=5.13 ms
64 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=5.45 ms
64 bytes from 192.168.1.1: icmp_seq=3 ttl=64 time=5.99 ms
64 bytes from 192.168.1.1: icmp_seq=4 ttl=64 time=6.34 ms
64 bytes from 192.168.1.1: icmp_seq=5 ttl=64 time=4.47 ms
64 bytes from 192.168.1.1: icmp_seq=6 ttl=64 time=6.45 ms
While after step 2, the latency becomes much larger:
PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=17.7 ms
64 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=15.0 ms
64 bytes from 192.168.1.1: icmp_seq=3 ttl=64 time=14.3 ms
64 bytes from 192.168.1.1: icmp_seq=4 ttl=64 time=16.5 ms
64 bytes from 192.168.1.1: icmp_seq=5 ttl=64 time=20.1 ms
The reason is, with step 2, power save is force enabled due to vdev not
running, although mac80211 was trying to disable it to honor userspace
configuration:
ath11k_pci 0000:03:00.0: wmi cmd sta powersave mode psmode 1 vdev id 0
Call Trace:
ath11k_wmi_pdev_set_ps_mode
ath11k_mac_op_bss_info_changed
ieee80211_bss_info_change_notify
ieee80211_reconfig
ieee80211_resume
wiphy_resume
This logic is taken from ath10k where it was added due to below comment:
Firmware doesn't behave nicely and consumes more power than
necessary if PS is disabled on a non-started vdev.
However we don't know whether such an issue also occurs to ath11k firmware
or not. But even if it does, it's not appropriate because it goes against
userspace, even cfg/mac80211 don't know we have enabled it in fact.
Remove it to fix this issue. In this way we not only get a better latency,
but also, and the most important, keeps the consistency between userspace
and kernel/driver. The biggest price for that would be the power consumption,
which is not that important, compared with the consistency.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30
Fixes: b2beffa7d9 ("ath11k: enable 802.11 power save mode in station mode")
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240309113115.11498-1-quic_bqiang@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 316f790ebcf94bdf59f794b7cdea4068dc676d4c ]
The kzalloc() in brcmf_pcie_download_fw_nvram() will return null
if the physical memory has run out. As a result, if we use
get_random_bytes() to generate random bytes in the randbuf, the
null pointer dereference bug will happen.
In order to prevent allocation failure, this patch adds a separate
function using buffer on kernel stack to generate random bytes in
the randbuf, which could prevent the kernel stack from overflow.
Fixes: 91918ce88d ("wifi: brcmfmac: pcie: Provide a buffer of random bytes to the device")
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240306140437.18177-1-duoming@zju.edu.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e57b7d62a1b2f496caf0beba81cec3c90fad80d5 ]
Currently host relies on CE interrupts to get notified that
the service ready message is ready. This results in timeout
issue if the interrupt is not fired, due to some unknown
reasons. See below logs:
[76321.937866] ath10k_pci 0000:02:00.0: wmi service ready event not received
...
[76322.016738] ath10k_pci 0000:02:00.0: Could not init core: -110
And finally it causes WLAN interface bring up failure.
Change to give it one more chance here by polling CE rings,
before failing directly.
Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00157-QCARMSWPZ-1
Fixes: 5e3dd157d7 ("ath10k: mac80211 driver for Qualcomm Atheros 802.11ac CQA98xx devices")
Reported-by: James Prestwood <prestwoj@gmail.com>
Tested-By: James Prestwood <prestwoj@gmail.com> # on QCA6174 hw3.2
Link: https://lore.kernel.org/linux-wireless/304ce305-fbe6-420e-ac2a-d61ae5e6ca1a@gmail.com/
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240227030409.89702-1-quic_bqiang@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 99dc422335d8b2bd4d105797241d3e715bae90e9 ]
Currently, io_ticks is accounted based on sampling, specifically
update_io_ticks() will always account io_ticks by 1 jiffies from
bdev_start_io_acct()/blk_account_io_start(), and the result can be
inaccurate, for example(HZ is 250):
Test script:
fio -filename=/dev/sda -bs=4k -rw=write -direct=1 -name=test -thinktime=4ms
Test result: util is about 90%, while the disk is really idle.
This behaviour is introduced by commit 5b18b5a737 ("block: delete
part_round_stats and switch to less precise counting"), however, there
was a key point that is missed that this patch also improve performance
a lot:
Before the commit:
part_round_stats:
if (part->stamp != now)
stats |= 1;
part_in_flight()
-> there can be lots of task here in 1 jiffies.
part_round_stats_single()
__part_stat_add()
part->stamp = now;
After the commit:
update_io_ticks:
stamp = part->bd_stamp;
if (time_after(now, stamp))
if (try_cmpxchg())
__part_stat_add()
-> only one task can reach here in 1 jiffies.
Hence in order to account io_ticks precisely, we only need to know if
there are IO inflight at most once in one jiffies. Noted that for
rq-based device, iterating tags should not be used here because
'tags->lock' is grabbed in blk_mq_find_and_get_req(), hence
part_stat_lock_inc/dec() and part_in_flight() is used to trace inflight.
The additional overhead is quite little:
- per cpu add/dec for each IO for rq-based device;
- per cpu sum for each jiffies;
And it's verified by null-blk that there are no performance degration
under heavy IO pressure.
Fixes: 5b18b5a737 ("block: delete part_round_stats and switch to less precise counting")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240509123717.3223892-2-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 06965037ce ]
There is only one caller for __blk_account_io_done(), the function
is small enough to fit in its caller blk_account_io_done().
Remove the function and opencode in the its caller
blk_account_io_done().
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20230327073427.4403-2-kch@nvidia.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: 99dc422335d8 ("block: support to account io_ticks precisely")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e165fb4dd6 ]
There is only one caller for __blk_account_io_start(), the function
is small enough to fit in its caller blk_account_io_start().
Remove the function and opencode in the its caller
blk_account_io_start().
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20230327073427.4403-2-kch@nvidia.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: 99dc422335d8 ("block: support to account io_ticks precisely")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f0e729af2eb6bee9eb58c4df1087f14ebaefe26b ]
Is is reported that for dm-raid10, lvextend + lvchange --syncaction will
trigger following softlockup:
kernel:watchdog: BUG: soft lockup - CPU#3 stuck for 26s! [mdX_resync:6976]
CPU: 7 PID: 3588 Comm: mdX_resync Kdump: loaded Not tainted 6.9.0-rc4-next-20240419 #1
RIP: 0010:_raw_spin_unlock_irq+0x13/0x30
Call Trace:
<TASK>
md_bitmap_start_sync+0x6b/0xf0
raid10_sync_request+0x25c/0x1b40 [raid10]
md_do_sync+0x64b/0x1020
md_thread+0xa7/0x170
kthread+0xcf/0x100
ret_from_fork+0x30/0x50
ret_from_fork_asm+0x1a/0x30
And the detailed process is as follows:
md_do_sync
j = mddev->resync_min
while (j < max_sectors)
sectors = raid10_sync_request(mddev, j, &skipped)
if (!md_bitmap_start_sync(..., &sync_blocks))
// md_bitmap_start_sync set sync_blocks to 0
return sync_blocks + sectors_skippe;
// sectors = 0;
j += sectors;
// j never change
Root cause is that commit 301867b1c1 ("md/raid10: check
slab-out-of-bounds in md_bitmap_get_counter") return early from
md_bitmap_get_counter(), without setting returned blocks.
Fix this problem by always set returned blocks from
md_bitmap_get_counter"(), as it used to be.
Noted that this patch just fix the softlockup problem in kernel, the
case that bitmap size doesn't match array size still need to be fixed.
Fixes: 301867b1c1 ("md/raid10: check slab-out-of-bounds in md_bitmap_get_counter")
Reported-and-tested-by: Nigel Croxon <ncroxon@redhat.com>
Closes: https://lore.kernel.org/all/71ba5272-ab07-43ba-8232-d2da642acb4e@redhat.com/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240422065824.2516-1-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c6854e5a267c28300ff045480b5a7ee7f6f1d913 ]
Add a check to make sure that the requested xattr node size is no larger
than the eraseblock minus the cleanmarker.
Unlike the usual inode nodes, the xattr nodes aren't split into parts
and spread across multiple eraseblocks, which means that a xattr node
must not occupy more than one eraseblock. If the requested xattr value is
too large, the xattr node can spill onto the next eraseblock, overwriting
the nodes and causing errors such as:
jffs2: argh. node added in wrong place at 0x0000b050(2)
jffs2: nextblock 0x0000a000, expected at 0000b00c
jffs2: error: (823) do_verify_xattr_datum: node CRC failed at 0x01e050,
read=0xfc892c93, calc=0x000000
jffs2: notice: (823) jffs2_get_inode_nodes: Node header CRC failed
at 0x01e00c. {848f,2fc4,0fef511f,59a3d171}
jffs2: Node at 0x0000000c with length 0x00001044 would run over the
end of the erase block
jffs2: Perhaps the file system was created with the wrong erase size?
jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found
at 0x00000010: 0x1044 instead
This breaks the filesystem and can lead to KASAN crashes such as:
BUG: KASAN: slab-out-of-bounds in jffs2_sum_add_kvec+0x125e/0x15d0
Read of size 4 at addr ffff88802c31e914 by task repro/830
CPU: 0 PID: 830 Comm: repro Not tainted 6.9.0-rc3+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS Arch Linux 1.16.3-1-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0xc6/0x120
print_report+0xc4/0x620
? __virt_addr_valid+0x308/0x5b0
kasan_report+0xc1/0xf0
? jffs2_sum_add_kvec+0x125e/0x15d0
? jffs2_sum_add_kvec+0x125e/0x15d0
jffs2_sum_add_kvec+0x125e/0x15d0
jffs2_flash_direct_writev+0xa8/0xd0
jffs2_flash_writev+0x9c9/0xef0
? __x64_sys_setxattr+0xc4/0x160
? do_syscall_64+0x69/0x140
? entry_SYSCALL_64_after_hwframe+0x76/0x7e
[...]
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: aa98d7cf59 ("[JFFS2][XATTR] XATTR support on JFFS2 (version. 5)")
Signed-off-by: Ilya Denisyev <dev@elkcl.ru>
Link: https://lore.kernel.org/r/20240412155357.237803-1-dev@elkcl.ru
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
