In order to be able to completely disable SVE even if the HW
seems to support it (most likely because the FW is broken),
move the SVE setup into the EL2 finalisation block, and
use a new idreg override to deal with it.
Note that we also nuke id_aa64zfr0_el1 as a byproduct, and
that SME also gets disabled, due to the dependency between the
two features.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220630160500.1536744-9-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
In order to be able to completely disable SME even if the HW
seems to support it (most likely because the FW is broken),
move the SME setup into the EL2 finalisation block, and
use a new idreg override to deal with it.
Note that we also nuke id_aa64smfr0_el1 as a byproduct.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220630160500.1536744-8-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
In order to feal with early override of features that are not
classically encoded in a standard ID register with a 4 bit wide
field, add a primitive that takes a sysreg value as an input
(instead of the usual sysreg name) as well as a bit field
width (usually 4).
No functional change.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220630160500.1536744-7-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Currently, the override mechanism can only deal with 4bit fields,
which is the most common case. However, we now have a bunch of
ID registers that have more diverse field widths, such as
ID_AA64SMFR0_EL1, which has fields that are a single bit wide.
Add the support for variable width, and a macro that encodes
a feature width of 4 for all existing override.
No functional change.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220630160500.1536744-6-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Checking for a feature being supported from assembly code is
a bit tedious if we need to factor in the idreg override.
Since we already have such code written for forcing nVHE, move
the whole thing into a macro. This heavily relies on the override
structure being called foo_override for foo_el1.
No functional change.
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220630160500.1536744-5-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
For CPUs that have the unfortunate mis-feature to be stuck in
VHE mode, we perform a funny dance where we completely shortcut
the normal boot process to enable VHE and run the kernel at EL2,
and only then start booting the kernel.
Not only this is pretty ugly, but it means that the EL2 finalisation
occurs before we have processed the sysreg override.
Instead, start executing the kernel as if it was an EL1 guest and
rely on the normal EL2 finalisation to go back to EL2.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220630160500.1536744-4-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
As we're about to switch the way E2H-stuck CPUs boot, save
the boot CPU E2H state as a flag tied to the boot mode
that can then be checked by the idreg override code.
This allows us to replace the is_kernel_in_hyp_mode() check
with a simple comparison with this state, even when running
at EL1. Note that this flag isn't saved in __boot_cpu_mode,
and is only kept in a register in the assembly code.
Use with caution.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220630160500.1536744-3-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
as we are about to perform a lot more in 'mutate_to_vhe' than
we currently do, this function really becomes the point where
we finalise the basic EL2 configuration.
Reflect this into the code by renaming a bunch of things:
- HVC_VHE_RESTART -> HVC_FINALISE_EL2
- switch_to_vhe --> finalise_el2
- mutate_to_vhe -> __finalise_el2
No functional changes.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220630160500.1536744-2-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Joey reports that booting 52-bit VA capable builds on 52-bit VA capable
CPUs is broken since commit 0d9b1ffefa ("arm64: mm: make vabits_actual
a build time constant if possible"). This is due to the fact that the
primary CPU reads the vabits_actual variable before it has been
assigned.
The reason for deferring the assignment of vabits_actual was that we try
to perform as few stores to memory as we can with the MMU and caches
off, due to the cache coherency issues it creates.
Since __cpu_setup() [which is where the read of vabits_actual occurs] is
also called on the secondary boot path, we cannot just read the CPU ID
registers directly, given that the size of the VA space is decided by
the capabilities of the primary CPU. So let's read vabits_actual only on
the secondary boot path, and read the CPU ID registers directly on the
primary boot path, by making it a function parameter of __cpu_setup().
To ensure that all users of vabits_actual (including kasan_early_init())
observe the correct value, move the assignment of vabits_actual back
into asm code, but still defer it to after the MMU and caches have been
enabled.
Cc: Will Deacon <will@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Fixes: 0d9b1ffefa ("arm64: mm: make vabits_actual a build time constant if possible")
Reported-by: Joey Gouly <joey.gouly@arm.com>
Co-developed-by: Joey Gouly <joey.gouly@arm.com>
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220701111045.2944309-1-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Currently, a build with CONFIG_EFI=n and CONFIG_KASAN=y will not
complete successfully because of missing symbols. This is due to the
fact that the __pi_ prefixed aliases for __memcpy/__memmove were put
inside a #ifdef CONFIG_EFI block inadvertently, and are therefore
missing from the build in question.
These definitions should only be provided when needed, as they will
otherwise clutter up the symbol table, kallsyms etc for no reason.
Fortunately, instead of using CPP conditionals, we can achieve the same
result by using the linker's PROVIDE() directive, which only defines a
symbol if it is required to complete the link. So let's use that for all
symbols alias definitions.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220629083246.3729177-1-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Currently, when KASLR is in effect, we set up the kernel virtual address
space twice: the first time, the KASLR seed is looked up in the device
tree, and the kernel virtual mapping is torn down and recreated again,
after which the relocations are applied a second time. The latter step
means that statically initialized global pointer variables will be reset
to their initial values, and to ensure that BSS variables are not set to
values based on the initial translation, they are cleared again as well.
All of this is needed because we need the command line (taken from the
DT) to tell us whether or not to randomize the virtual address space
before entering the kernel proper. However, this code has expanded
little by little and now creates global state unrelated to the virtual
randomization of the kernel before the mapping is torn down and set up
again, and the BSS cleared for a second time. This has created some
issues in the past, and it would be better to avoid this little dance if
possible.
So instead, let's use the temporary mapping of the device tree, and
execute the bare minimum of code to decide whether or not KASLR should
be enabled, and what the seed is. Only then, create the virtual kernel
mapping, clear BSS, etc and proceed as normal. This avoids the issues
around inconsistent global state due to BSS being cleared twice, and is
generally more maintainable, as it permits us to defer all the remaining
DT parsing and KASLR initialization to a later time.
This means the relocation fixup code runs only a single time as well,
allowing us to simplify the RELR handling code too, which is not
idempotent and was therefore required to keep track of the offset that
was applied the first time around.
Note that this means we have to clone a pair of FDT library objects, so
that we can control how they are built - we need the stack protector
and other instrumentation disabled so that the code can tolerate being
called this early. Note that only the kernel page tables and the
temporary stack are mapped read-write at this point, which ensures that
the early code does not modify any global state inadvertently.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220624150651.1358849-21-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
The early KASLR init code runs extremely early, and anything that could
be deferred until later should be. So let's defer the randomization of
the module region until much later - this also simplifies the
arithmetic, given that we no longer have to reason about the link time
vs load time placement of the core kernel explicitly. Also get rid of
the global status variable, and infer the status reported by the
diagnostic print from other KASLR related context.
While at it, get rid of the special case for KASAN without
KASAN_VMALLOC, which never occurs in practice.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220624150651.1358849-20-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
In order to avoid having to touch memory with the MMU and caches
disabled, and therefore having to invalidate it from the caches
explicitly, just defer storing the value until after the MMU has been
turned on, unless we are giving up with an error.
While at it, move the associated variable definitions into C code.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220624150651.1358849-19-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Now that we can access the entire kernel image via the ID map, we can
execute the page table population code with the MMU and caches enabled.
The only thing we need to ensure is that translations via TTBR1 remain
disabled while we are updating the page tables the second time around,
in case KASLR wants them to be randomized.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220624150651.1358849-18-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
We need to access the DT very early to get at the command line and the
KASLR seed, which currently means we rely on some hacks to call into the
kernel before really calling into the kernel, which is undesirable.
So instead, let's create a mapping for the FDT in the initial ID map,
which is feasible now that it has been extended to cover more than a
single page or block, and can be updated in place to remap other output
addresses.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220624150651.1358849-15-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Formerly, we had to access the RELA and RELR tables via the kernel
mapping that was being relocated, and so deriving the start and end
addresses using ADRP/ADD references was not possible, as the relocation
code runs from the ID map.
Now that we map the entire kernel image via the ID map, we can simplify
this, and just load the entries via the ID map as well.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220624150651.1358849-14-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
As a first step towards avoiding the need to create, tear down and
recreate the kernel virtual mapping with MMU and caches disabled, start
by expanding the ID map so it covers the page tables as well as all
executable code. This will allow us to populate the page tables with the
MMU and caches on, and call KASLR init code before setting up the
virtual mapping.
Since this ID map is only needed at boot, create it as a temporary set
of page tables, and populate the permanent ID map after enabling the MMU
and caches. While at it, switch to read-only attributes for the where
possible, as writable permissions are only needed for the initial kernel
page tables. Note that on 4k granule configurations, the permanent ID
map will now be reduced to a single page rather than a 2M block mapping.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220624150651.1358849-13-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
The asm macros used to create the initial ID map and kernel mappings
don't support randomly remapping parts of the address space after it has
been populated. What we can do, however, given that all block or page
mappings are created at the final level, is take a subset of the mapped
range and update its attributes or output address. This will permit us
to make parts of these page tables read-only, or remap a part of it to
cover the device tree.
So add a helper that encapsulates this.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220624150651.1358849-12-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Some early boot code runs before the virtual placement of the kernel is
finalized, and we used to go back to the very start and recreate the ID
map along with the page tables describing the virtual kernel mapping,
and this involved setting some global variables with the caches off.
In order to ensure that global state created by the KASLR code is not
corrupted by the cache invalidation that occurs in that case, we needed
to clean those global variables to the PoC explicitly.
This is no longer needed now that the ID map is created only once (and
the associated global variable updates are no longer repeated). So drop
the cache maintenance that is no longer necessary.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20220624150651.1358849-9-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Split off the creation of the ID map page tables, so that we can avoid
running it again unnecessarily when KASLR is in effect (which only
randomizes the virtual placement). This will permit us to drop some
explicit cache maintenance to the PoC which was necessary because the
cache invalidation being performed on some global variables might
otherwise clobber unrelated variables that happen to share a cacheline.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220624150651.1358849-8-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
In a future patch, we will start using an ID map that covers the entire
image, rather than a single page. This means that we need to deal with
the pathological case of an extended ID map where the kernel image does
not fit neatly inside a single entry at the root level, which means we
will need to create additional table entries and map additional pages
for page tables.
The existing map_memory macro already takes care of most of that, so
let's just extend it to deal with this case as well. While at it, drop
the conditional branch on the value of T0SZ: we don't set the variable
anymore in the entry code, and so we can just let the map_memory macro
deal with the case where the output address exceeds VA_BITS.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220624150651.1358849-7-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Simplify the macros in head.S that are used to set up the early page
tables, by switching to immediates for the number of bits that are
interpreted as the table index at each level. This makes it much
easier to infer from the instruction stream what is going on, and
reduces the number of instructions emitted substantially.
Note that the extended ID map for cases where no additional level needs
to be configured now uses a compile time size as well, which means that
we interpret up to 10 bits as the table index at the root level (for
52-bit physical addressing), without taking into account whether or not
this is supported on the current system. However, those bits can only
be set if we are executing the image from an address that exceeds the
48-bit PA range, and are guaranteed to be cleared otherwise, and given
that we are dealing with a mapping in the lower TTBR0 range of the
address space, the result is therefore the same as if we'd mask off only
6 bits.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220624150651.1358849-6-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
The assignment of idmap_ptrs_per_pgd lacks any cache invalidation, even
though it is updated with the MMU and caches disabled. However, we never
bother to read the value again except in the very next instruction, and
so we can just drop the variable entirely.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20220624150651.1358849-5-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Setting idmap_t0sz involves fiddling with the caches if done with the
MMU off. Since we will be creating an initial ID map with the MMU and
caches off, and the permanent ID map with the MMU and caches on, let's
move this assignment of idmap_t0sz out of the startup code, and replace
it with a macro that simply issues the three instructions needed to
calculate the value wherever it is needed before the MMU is turned on.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220624150651.1358849-4-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Currently, we only support 52-bit virtual addressing on 64k pages
configurations, and in all other cases, vabits_actual is guaranteed to
equal VA_BITS (== VA_BITS_MIN). So get rid of the variable entirely in
that case.
While at it, move the assignment out of the asm entry code - it has no
need to be there.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220624150651.1358849-3-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Pull x86 fixes from Thomas Gleixner:
- Make RESERVE_BRK() work again with older binutils. The recent
'simplification' broke that.
- Make early #VE handling increment RIP when successful.
- Make the #VE code consistent vs. the RIP adjustments and add
comments.
- Handle load_unaligned_zeropad() across page boundaries correctly in
#VE when the second page is shared.
* tag 'x86-urgent-2022-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tdx: Handle load_unaligned_zeropad() page-cross to a shared page
x86/tdx: Clarify RIP adjustments in #VE handler
x86/tdx: Fix early #VE handling
x86/mm: Fix RESERVE_BRK() for older binutils
Pull build tooling updates from Thomas Gleixner:
- Remove obsolete CONFIG_X86_SMAP reference from objtool
- Fix overlapping text section failures in faddr2line for real
- Remove OBJECT_FILES_NON_STANDARD usage from x86 ftrace and replace it
with finegrained annotations so objtool can validate that code
correctly.
* tag 'objtool-urgent-2022-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ftrace: Remove OBJECT_FILES_NON_STANDARD usage
faddr2line: Fix overlapping text section failures, the sequel
objtool: Fix obsolete reference to CONFIG_X86_SMAP
Pull scheduler fix from Thomas Gleixner:
"A single scheduler fix plugging a race between sched_setscheduler()
and balance_push().
sched_setscheduler() spliced the balance callbacks accross a lock
break which makes it possible for an interleaving schedule() to
observe an empty list"
* tag 'sched-urgent-2022-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Fix balance_push() vs __sched_setscheduler()
Pull lockdep fix from Thomas Gleixner:
"A RT fix for lockdep.
lockdep invokes prandom_u32() to create cookies. This worked until
prandom_u32() was switched to the real random generator, which takes a
spinlock for extraction, which does not work on RT when invoked from
atomic contexts.
lockdep has no requirement for real random numbers and it turns out
sched_clock() is good enough to create the cookie. That works
everywhere and is faster"
* tag 'locking-urgent-2022-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/lockdep: Use sched_clock() for random numbers
Pull irq fixes from Thomas Gleixner:
"A set of interrupt subsystem updates:
Core:
- Ensure runtime power management for chained interrupts
Drivers:
- A collection of OF node refcount fixes
- Unbreak MIPS uniprocessor builds
- Fix xilinx interrupt controller Kconfig dependencies
- Add a missing compatible string to the Uniphier driver"
* tag 'irq-urgent-2022-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/loongson-liointc: Use architecture register to get coreid
irqchip/uniphier-aidet: Add compatible string for NX1 SoC
dt-bindings: interrupt-controller/uniphier-aidet: Add bindings for NX1 SoC
irqchip/realtek-rtl: Fix refcount leak in map_interrupts
irqchip/gic-v3: Fix refcount leak in gic_populate_ppi_partitions
irqchip/gic-v3: Fix error handling in gic_populate_ppi_partitions
irqchip/apple-aic: Fix refcount leak in aic_of_ic_init
irqchip/apple-aic: Fix refcount leak in build_fiq_affinity
irqchip/gic/realview: Fix refcount leak in realview_gic_of_init
irqchip/xilinx: Remove microblaze+zynq dependency
genirq: PM: Use runtime PM for chained interrupts
Pull char/misc driver fixes for real from Greg KH:
"Let's tag the proper branch this time...
Here are some small char/misc driver fixes for 5.19-rc3 that resolve
some reported issues.
They include:
- mei driver fixes
- comedi driver fix
- rtsx build warning fix
- fsl-mc-bus driver fix
All of these have been in linux-next for a while with no reported
issues"
This is what the merge in commit f0ec9c65a8 _should_ have merged, but
Greg fat-fingered the pull request and I got some small changes from
linux-next instead there. Credit to Nathan Chancellor for eagle-eyes.
Link: https://lore.kernel.org/all/Yqywy+Md2AfGDu8v@dev-arch.thelio-3990X/
* tag 'char-misc-5.19-rc3-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
bus: fsl-mc-bus: fix KASAN use-after-free in fsl_mc_bus_remove()
mei: me: add raptor lake point S DID
mei: hbm: drop capability response on early shutdown
mei: me: set internal pg flag to off on hardware reset
misc: rtsx: Fix clang -Wsometimes-uninitialized in rts5261_init_from_hw()
comedi: vmk80xx: fix expression for tx buffer size
Pull i2c fixes from Wolfram Sang:
"MAINTAINERS rectifications and a few minor driver fixes"
* tag 'i2c-for-5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: mediatek: Fix an error handling path in mtk_i2c_probe()
i2c: designware: Use standard optional ref clock implementation
MAINTAINERS: core DT include belongs to core
MAINTAINERS: add include/dt-bindings/i2c to I2C SUBSYSTEM HOST DRIVERS
i2c: npcm7xx: Add check for platform_driver_register
MAINTAINERS: Update Synopsys DesignWare I2C to Supported
Pull xfs fixes from Darrick Wong:
"There's not a whole lot this time around (I'm still on vacation) but
here are some important fixes for new features merged in -rc1:
- Fix a bug where inode flag changes would accidentally drop nrext64
- Fix a race condition when toggling LARP mode"
* tag 'xfs-5.19-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: preserve DIFLAG2_NREXT64 when setting other inode attributes
xfs: fix variable state usage
xfs: fix TOCTOU race involving the new logged xattrs control knob
Pull ext4 fixes from Ted Ts'o:
"Fix a variety of bugs, many of which were found by folks using fuzzing
or error injection.
Also fix up how test_dummy_encryption mount option is handled for the
new mount API.
Finally, fix/cleanup a number of comments and ext4 Documentation
files"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix a doubled word "need" in a comment
ext4: add reserved GDT blocks check
ext4: make variable "count" signed
ext4: correct the judgment of BUG in ext4_mb_normalize_request
ext4: fix bug_on ext4_mb_use_inode_pa
ext4: fix up test_dummy_encryption handling for new mount API
ext4: use kmemdup() to replace kmalloc + memcpy
ext4: fix super block checksum incorrect after mount
ext4: improve write performance with disabled delalloc
ext4: fix warning when submitting superblock in ext4_commit_super()
ext4, doc: remove unnecessary escaping
ext4: fix incorrect comment in ext4_bio_write_page()
fs: fix jbd2_journal_try_to_free_buffers() kernel-doc comment
Pull cifs client fixes from Steve French:
"Two cifs debugging improvements - one found to deal with debugging a
multichannel problem and one for a recent fallocate issue
This does include the two larger multichannel reconnect (dynamically
adjusting interfaces on reconnect) patches, because we recently found
an additional problem with multichannel to one server type that I want
to include at the same time"
* tag '5.19-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: when a channel is not found for server, log its connection id
smb3: add trace point for SMB2_set_eof
We capture a NULL pointer issue when resizing a corrupt ext4 image which
is freshly clear resize_inode feature (not run e2fsck). It could be
simply reproduced by following steps. The problem is because of the
resize_inode feature was cleared, and it will convert the filesystem to
meta_bg mode in ext4_resize_fs(), but the es->s_reserved_gdt_blocks was
not reduced to zero, so could we mistakenly call reserve_backup_gdb()
and passing an uninitialized resize_inode to it when adding new group
descriptors.
mkfs.ext4 /dev/sda 3G
tune2fs -O ^resize_inode /dev/sda #forget to run requested e2fsck
mount /dev/sda /mnt
resize2fs /dev/sda 8G
========
BUG: kernel NULL pointer dereference, address: 0000000000000028
CPU: 19 PID: 3243 Comm: resize2fs Not tainted 5.18.0-rc7-00001-gfde086c5ebfd #748
...
RIP: 0010:ext4_flex_group_add+0xe08/0x2570
...
Call Trace:
<TASK>
ext4_resize_fs+0xbec/0x1660
__ext4_ioctl+0x1749/0x24e0
ext4_ioctl+0x12/0x20
__x64_sys_ioctl+0xa6/0x110
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f2dd739617b
========
The fix is simple, add a check in ext4_resize_begin() to make sure that
the es->s_reserved_gdt_blocks is zero when the resize_inode feature is
disabled.
Cc: stable@kernel.org
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220601092717.763694-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_mb_normalize_request() can move logical start of allocated blocks
to reduce fragmentation and better utilize preallocation. However logical
block requested as a start of allocation (ac->ac_o_ex.fe_logical) should
always be covered by allocated blocks so we should check that by
modifying and to or in the assertion.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220528110017.354175-3-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Hulk Robot reported a BUG_ON:
==================================================================
kernel BUG at fs/ext4/mballoc.c:3211!
[...]
RIP: 0010:ext4_mb_mark_diskspace_used.cold+0x85/0x136f
[...]
Call Trace:
ext4_mb_new_blocks+0x9df/0x5d30
ext4_ext_map_blocks+0x1803/0x4d80
ext4_map_blocks+0x3a4/0x1a10
ext4_writepages+0x126d/0x2c30
do_writepages+0x7f/0x1b0
__filemap_fdatawrite_range+0x285/0x3b0
file_write_and_wait_range+0xb1/0x140
ext4_sync_file+0x1aa/0xca0
vfs_fsync_range+0xfb/0x260
do_fsync+0x48/0xa0
[...]
==================================================================
Above issue may happen as follows:
-------------------------------------
do_fsync
vfs_fsync_range
ext4_sync_file
file_write_and_wait_range
__filemap_fdatawrite_range
do_writepages
ext4_writepages
mpage_map_and_submit_extent
mpage_map_one_extent
ext4_map_blocks
ext4_mb_new_blocks
ext4_mb_normalize_request
>>> start + size <= ac->ac_o_ex.fe_logical
ext4_mb_regular_allocator
ext4_mb_simple_scan_group
ext4_mb_use_best_found
ext4_mb_new_preallocation
ext4_mb_new_inode_pa
ext4_mb_use_inode_pa
>>> set ac->ac_b_ex.fe_len <= 0
ext4_mb_mark_diskspace_used
>>> BUG_ON(ac->ac_b_ex.fe_len <= 0);
we can easily reproduce this problem with the following commands:
`fallocate -l100M disk`
`mkfs.ext4 -b 1024 -g 256 disk`
`mount disk /mnt`
`fsstress -d /mnt -l 0 -n 1000 -p 1`
The size must be smaller than or equal to EXT4_BLOCKS_PER_GROUP.
Therefore, "start + size <= ac->ac_o_ex.fe_logical" may occur
when the size is truncated. So start should be the start position of
the group where ac_o_ex.fe_logical is located after alignment.
In addition, when the value of fe_logical or EXT4_BLOCKS_PER_GROUP
is very large, the value calculated by start_off is more accurate.
Cc: stable@kernel.org
Fixes: cd648b8a8f ("ext4: trim allocation requests to group size")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220528110017.354175-2-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since ext4 was converted to the new mount API, the test_dummy_encryption
mount option isn't being handled entirely correctly, because the needed
fscrypt_set_test_dummy_encryption() helper function combines
parsing/checking/applying into one function. That doesn't work well
with the new mount API, which split these into separate steps.
This was sort of okay anyway, due to the parsing logic that was copied
from fscrypt_set_test_dummy_encryption() into ext4_parse_param(),
combined with an additional check in ext4_check_test_dummy_encryption().
However, these overlooked the case of changing the value of
test_dummy_encryption on remount, which isn't allowed but ext4 wasn't
detecting until ext4_apply_options() when it's too late to fail.
Another bug is that if test_dummy_encryption was specified multiple
times with an argument, memory was leaked.
Fix this up properly by using the new helper functions that allow
splitting up the parse/check/apply steps for test_dummy_encryption.
Fixes: cebe85d570 ("ext4: switch to the new mount api")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20220526040412.173025-1-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
