commit eb8dbe8032 upstream.
The direction of the pipe argument must match the request-type direction
bit or control requests may fail depending on the host-controller-driver
implementation.
Fix the three requests which erroneously used usb_rcvctrlpipe().
Fixes: f7a33e608d ("USB: serial: add quatech2 usb to serial driver")
Cc: stable@vger.kernel.org # 3.5
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fc0b3dc9a1 upstream.
Add device id for Zyxel Omni 56K Plus modem, this modem include:
USB chip:
NetChip
NET2888
Main chip:
901041A
F721501APGF
Another modem using the same chips is the Zyxel Omni 56K DUO/NEO,
could be added with the right USB ID.
Signed-off-by: Alexandre GRIVEAUX <agriveaux@deutnet.info>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6fc1db5e62 upstream.
During unbind, ffs_func_eps_disable() will be executed, resulting in
completion callbacks for any pending USB requests. When using AIO,
irrespective of the completion status, io_data work is queued to
io_completion_wq to evaluate and handle the completed requests. Since
work runs asynchronously to the unbind() routine, there can be a
scenario where the work runs after the USB gadget has been fully
removed, resulting in accessing of a resource which has been already
freed. (i.e. usb_ep_free_request() accessing the USB ep structure)
Explicitly drain the io_completion_wq, instead of relying on the
destroy_workqueue() (in ffs_data_put()) to make sure no pending
completion work items are running.
Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1621644261-1236-1-git-send-email-wcheng@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f247f0a82a upstream.
If ucsi_init() fails for some reason (e.g. ucsi_register_port()
fails or general communication failure to the PPM), particularly at
any point after the GET_CAPABILITY command had been issued, this
results in unwinding the initialization and returning an error.
However the ucsi structure's ucsi_capability member retains its
current value, including likely a non-zero num_connectors.
And because ucsi_init() itself is done in a workqueue a UCSI
interface driver will be unaware that it failed and may think the
ucsi_register() call was completely successful. Later, if
ucsi_unregister() is called, due to this stale ucsi->cap value it
would try to access the items in the ucsi->connector array which
might not be in a proper state or not even allocated at all and
results in NULL or invalid pointer dereference.
Fix this by clearing the ucsi->cap value to 0 during the error
path of ucsi_init() in order to prevent a later ucsi_unregister()
from entering the connector cleanup loop.
Fixes: c1b0bc2dab ("usb: typec: Add support for UCSI interface")
Cc: stable@vger.kernel.org
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Mayank Rana <mrana@codeaurora.org>
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Link: https://lore.kernel.org/r/20210609073535.5094-1-jackp@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b65ba0c362 upstream.
In commit 92af4fc6ec ("usb: musb: Fix suspend with devices
connected for a64"), the logic to support the
MUSB_QUIRK_B_DISCONNECT_99 quirk was modified to only conditionally
schedule the musb->irq_work delayed work.
This commit badly breaks ECM Gadget on AM335X. Indeed, with this
commit, one can observe massive packet loss:
$ ping 192.168.0.100
...
15 packets transmitted, 3 received, 80% packet loss, time 14316ms
Reverting this commit brings back a properly functioning ECM
Gadget. An analysis of the commit seems to indicate that a mistake was
made: the previous code was not falling through into the
MUSB_QUIRK_B_INVALID_VBUS_91, but now it is, unless the condition is
taken.
Changing the logic to be as it was before the problematic commit *and*
only conditionally scheduling musb->irq_work resolves the regression:
$ ping 192.168.0.100
...
64 packets transmitted, 64 received, 0% packet loss, time 64475ms
Fixes: 92af4fc6ec ("usb: musb: Fix suspend with devices connected for a64")
Cc: stable@vger.kernel.org
Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Tested-by: Drew Fustini <drew@beagleboard.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Link: https://lore.kernel.org/r/20210528140446.278076-1-thomas.petazzoni@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d00889080a upstream.
There is no validation of the index from dwc3_wIndex_to_dep() and we might
be referring a non-existing ep and trigger a NULL pointer exception. In
certain configurations we might use fewer eps and the index might wrongly
indicate a larger ep index than existing.
By adding this validation from the patch we can actually report a wrong
index back to the caller.
In our usecase we are using a composite device on an older kernel, but
upstream might use this fix also. Unfortunately, I cannot describe the
hardware for others to reproduce the issue as it is a proprietary
implementation.
[ 82.958261] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a4
[ 82.966891] Mem abort info:
[ 82.969663] ESR = 0x96000006
[ 82.972703] Exception class = DABT (current EL), IL = 32 bits
[ 82.978603] SET = 0, FnV = 0
[ 82.981642] EA = 0, S1PTW = 0
[ 82.984765] Data abort info:
[ 82.987631] ISV = 0, ISS = 0x00000006
[ 82.991449] CM = 0, WnR = 0
[ 82.994409] user pgtable: 4k pages, 39-bit VAs, pgdp = 00000000c6210ccc
[ 83.000999] [00000000000000a4] pgd=0000000053aa5003, pud=0000000053aa5003, pmd=0000000000000000
[ 83.009685] Internal error: Oops: 96000006 [#1] PREEMPT SMP
[ 83.026433] Process irq/62-dwc3 (pid: 303, stack limit = 0x000000003985154c)
[ 83.033470] CPU: 0 PID: 303 Comm: irq/62-dwc3 Not tainted 4.19.124 #1
[ 83.044836] pstate: 60000085 (nZCv daIf -PAN -UAO)
[ 83.049628] pc : dwc3_ep0_handle_feature+0x414/0x43c
[ 83.054558] lr : dwc3_ep0_interrupt+0x3b4/0xc94
...
[ 83.141788] Call trace:
[ 83.144227] dwc3_ep0_handle_feature+0x414/0x43c
[ 83.148823] dwc3_ep0_interrupt+0x3b4/0xc94
[ 83.181546] ---[ end trace aac6b5267d84c32f ]---
Signed-off-by: Marian-Cristian Rotariu <marian.c.rotariu@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210608162650.58426-1-marian.c.rotariu@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1958ff5ad2 upstream.
The reasoning for this change is that if we already had
a packet pending, then we also already had a pending timer,
and as such there is no need to reschedule it.
This also prevents packets getting delayed 60 ms worst case
under a tiny packet every 290us transmit load, by keeping the
timeout always relative to the first queued up packet.
(300us delay * 16KB max aggregation / 80 byte packet =~ 60 ms)
As such the first packet is now at most delayed by 300us.
Under low transmit load, this will simply result in us sending
a shorter aggregate, as originally intended.
This patch has the benefit of greatly reducing (by ~10 factor
with 1500 byte frames aggregated into 16 kiB) the number of
(potentially pretty costly) updates to the hrtimer.
Cc: Brooke Basile <brookebasile@gmail.com>
Cc: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20210608085438.813960-1-zenczykowski@gmail.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aefd7f7065 upstream.
Syzbot managed to trigger this assert while performing its fuzzing.
Turns out it's better to have those asserts turned into full-fledged
checks so that in case buggy btrfs images are mounted the users gets
an error and mounting is stopped. Alternatively with CONFIG_BTRFS_ASSERT
disabled such image would have been erroneously allowed to be mounted.
Reported-by: syzbot+a6bf271c02e4fe66b4e4@syzkaller.appspotmail.com
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add uuids to the messages ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit da27a83fd6 upstream.
KVM's mechanism for accessing guest memory translates a guest physical
address (gpa) to a host virtual address using the right-shifted gpa
(also known as gfn) and a struct kvm_memory_slot. The translation is
performed in __gfn_to_hva_memslot using the following formula:
hva = slot->userspace_addr + (gfn - slot->base_gfn) * PAGE_SIZE
It is expected that gfn falls within the boundaries of the guest's
physical memory. However, a guest can access invalid physical addresses
in such a way that the gfn is invalid.
__gfn_to_hva_memslot is called from kvm_vcpu_gfn_to_hva_prot, which first
retrieves a memslot through __gfn_to_memslot. While __gfn_to_memslot
does check that the gfn falls within the boundaries of the guest's
physical memory or not, a CPU can speculate the result of the check and
continue execution speculatively using an illegal gfn. The speculation
can result in calculating an out-of-bounds hva. If the resulting host
virtual address is used to load another guest physical address, this
is effectively a Spectre gadget consisting of two consecutive reads,
the second of which is data dependent on the first.
Right now it's not clear if there are any cases in which this is
exploitable. One interesting case was reported by the original author
of this patch, and involves visiting guest page tables on x86. Right
now these are not vulnerable because the hva read goes through get_user(),
which contains an LFENCE speculation barrier. However, there are
patches in progress for x86 uaccess.h to mask kernel addresses instead of
using LFENCE; once these land, a guest could use speculation to read
from the VMM's ring 3 address space. Other architectures such as ARM
already use the address masking method, and would be susceptible to
this same kind of data-dependent access gadgets. Therefore, this patch
proactively protects from these attacks by masking out-of-bounds gfns
in __gfn_to_hva_memslot, which blocks speculation of invalid hvas.
Sean Christopherson noted that this patch does not cover
kvm_read_guest_offset_cached. This however is limited to a few bytes
past the end of the cache, and therefore it is unlikely to be useful in
the context of building a chain of data dependent accesses.
Reported-by: Artemiy Margaritov <artemiy.margaritov@gmail.com>
Co-developed-by: Artemiy Margaritov <artemiy.margaritov@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c336a5ee98 upstream.
This patch eliminates the following smatch warning:
drivers/gpu/drm/drm_auth.c:320 drm_master_release() warn: unlocked access 'master' (line 318) expected lock '&dev->master_mutex'
The 'file_priv->master' field should be protected by the mutex lock to
'&dev->master_mutex'. This is because other processes can concurrently
modify this field and free the current 'file_priv->master'
pointer. This could result in a use-after-free error when 'master' is
dereferenced in subsequent function calls to
'drm_legacy_lock_master_cleanup()' or to 'drm_lease_revoke()'.
An example of a scenario that would produce this error can be seen
from a similar bug in 'drm_getunique()' that was reported by Syzbot:
https://syzkaller.appspot.com/bug?id=148d2f1dfac64af52ffd27b661981a540724f803
In the Syzbot report, another process concurrently acquired the
device's master mutex in 'drm_setmaster_ioctl()', then overwrote
'fpriv->master' in 'drm_new_set_master()'. The old value of
'fpriv->master' was subsequently freed before the mutex was unlocked.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210609092119.173590-1-desmondcheongzx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 13817d466e upstream.
Commit 571e31fa60 ("spi: bcm2835: Cache CS register value for
->prepare_message()") limited the number of slaves to 3 at compile-time.
The limitation was necessitated by a statically-sized array prepare_cs[]
in the driver private data which contains a per-slave register value.
The commit sought to enforce the limitation at run-time by setting the
controller's num_chipselect to 3: Slaves with a higher chipselect are
rejected by spi_add_device().
However the commit neglected that num_chipselect only limits the number
of *native* chipselects. If GPIO chipselects are specified in the
device tree for more than 3 slaves, num_chipselect is silently raised by
of_spi_get_gpio_numbers() and the result are out-of-bounds accesses to
the statically-sized array prepare_cs[].
As a bandaid fix which is backportable to stable, raise the number of
allowed slaves to 24 (which "ought to be enough for anybody"), enforce
the limitation on slave ->setup and revert num_chipselect to 3 (which is
the number of native chipselects supported by the controller).
An upcoming for-next commit will allow an arbitrary number of slaves.
Fixes: 571e31fa60 ("spi: bcm2835: Cache CS register value for ->prepare_message()")
Reported-by: Joe Burmeister <joe.burmeister@devtank.co.uk>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v5.4+
Cc: Phil Elwell <phil@raspberrypi.com>
Link: https://lore.kernel.org/r/75854affc1923309fde05e47494263bde73e5592.1621703210.git.lukas@wunner.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2e7a858ba8 upstream.
GCC puts the main function into .text.startup when compiled with -Os (or
-O2). This results in arch/x86/boot/main.c having a .text.startup
section which is currently not included explicitly in the linker script
setup.ld in the same directory.
The BFD linker places this orphan section immediately after .text, so
this still works. However, LLD git, since [1], is choosing to place it
immediately after the .bstext section instead (this is the first code
section). This plays havoc with the section layout that setup.elf
requires to create the setup header, for eg on 64-bit:
LD arch/x86/boot/setup.elf
ld.lld: error: section .text.startup file range overlaps with .header
>>> .text.startup range is [0x200040, 0x2001FE]
>>> .header range is [0x2001EF, 0x20026B]
ld.lld: error: section .header file range overlaps with .bsdata
>>> .header range is [0x2001EF, 0x20026B]
>>> .bsdata range is [0x2001FF, 0x200398]
ld.lld: error: section .bsdata file range overlaps with .entrytext
>>> .bsdata range is [0x2001FF, 0x200398]
>>> .entrytext range is [0x20026C, 0x2002D3]
ld.lld: error: section .text.startup virtual address range overlaps
with .header
>>> .text.startup range is [0x40, 0x1FE]
>>> .header range is [0x1EF, 0x26B]
ld.lld: error: section .header virtual address range overlaps with
.bsdata
>>> .header range is [0x1EF, 0x26B]
>>> .bsdata range is [0x1FF, 0x398]
ld.lld: error: section .bsdata virtual address range overlaps with
.entrytext
>>> .bsdata range is [0x1FF, 0x398]
>>> .entrytext range is [0x26C, 0x2D3]
ld.lld: error: section .text.startup load address range overlaps with
.header
>>> .text.startup range is [0x40, 0x1FE]
>>> .header range is [0x1EF, 0x26B]
ld.lld: error: section .header load address range overlaps with
.bsdata
>>> .header range is [0x1EF, 0x26B]
>>> .bsdata range is [0x1FF, 0x398]
ld.lld: error: section .bsdata load address range overlaps with
.entrytext
>>> .bsdata range is [0x1FF, 0x398]
>>> .entrytext range is [0x26C, 0x2D3]
Add .text.* to the .text output section to fix this, and also prevent
any future surprises if the compiler decides to create other such
sections.
[1] https://reviews.llvm.org/D75225
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Fangrui Song <maskray@google.com>
Link: https://lore.kernel.org/r/20200731230820.1742553-5-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8f0cdec8b5 ]
The P2040/P2041 has an erratum where the normal i2c recovery mechanism
does not work. Implement the alternative recovery mechanism documented
in the P2040 Chip Errata Rev Q.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 65171b2df1 ]
Move the existing calls of mpc_i2c_fixup() to a recovery function
registered via bus_recovery_info. This makes it more obvious that
recovery is supported and allows for a future where recovery is
triggered by the i2c core.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2ec6f20b33 ]
Commit c7299fea67 ("spi: Fix spi device unregister flow") changed the
SPI core's behavior if the ->setup() hook returns an error upon adding
an spi_device: Before, the ->cleanup() hook was invoked to free any
allocations that were made by ->setup(). With the commit, that's no
longer the case, so the ->setup() hook is expected to free the
allocations itself.
I've identified 5 drivers which depend on the old behavior and am fixing
them up hereinafter: spi-bitbang.c spi-fsl-spi.c spi-omap-uwire.c
spi-omap2-mcspi.c spi-pxa2xx.c
Importantly, ->setup() is not only invoked on spi_device *addition*:
It may subsequently be called to *change* SPI parameters. If changing
these SPI parameters fails, freeing memory allocations would be wrong.
That should only be done if the spi_device is finally destroyed.
I am therefore using a bool "initial_setup" in 4 of the affected drivers
to differentiate between the invocation on *adding* the spi_device and
any subsequent invocations: spi-bitbang.c spi-fsl-spi.c spi-omap-uwire.c
spi-omap2-mcspi.c
In spi-pxa2xx.c, it seems the ->setup() hook can only fail on spi_device
addition, not any subsequent calls. It therefore doesn't need the bool.
It's worth noting that 5 other drivers already perform a cleanup if the
->setup() hook fails. Before c7299fea67, they caused a double-free
if ->setup() failed on spi_device addition. Since the commit, they're
fine. These drivers are: spi-mpc512x-psc.c spi-pl022.c spi-s3c64xx.c
spi-st-ssc4.c spi-tegra114.c
(spi-pxa2xx.c also already performs a cleanup, but only in one of
several error paths.)
Fixes: c7299fea67 ("spi: Fix spi device unregister flow")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: Saravana Kannan <saravanak@google.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> # pxa2xx
Link: https://lore.kernel.org/r/f76a0599469f265b69c371538794101fa37b5536.1622149321.git.lukas@wunner.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 19ae697a1e ]
The i2c controllers on the P1010 have an erratum where the documented
scheme for i2c bus recovery will not work (A-004447). A different
mechanism is needed which is documented in the P1010 Chip Errata Rev L.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7adc7b225c ]
The i2c controllers on the P2040/P2041 have an erratum where the
documented scheme for i2c bus recovery will not work (A-004447). A
different mechanism is needed which is documented in the P2040 Chip
Errata Rev Q (latest available at the time of writing).
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c1f3193b1 ]
The third parameter of module_param() is permissions for the sysfs node
but it looks like it is being used as the initial value of the parameter
here. In fact, false here equates to omitting the file from sysfs and
does not affect the value of require_signatures.
Making the parameter writable is not simple because going from
false->true is fine but it should not be possible to remove the
requirement to verify a signature. But it can be useful to inspect the
value of this parameter from userspace, so change the permissions to
make a read-only file in sysfs.
Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 78cf0eb926 ]
When update the latest mainline kernel with the following three configs,
the kernel hangs during startup:
(1) CONFIG_FUNCTION_GRAPH_TRACER=y
(2) CONFIG_PREEMPT_TRACER=y
(3) CONFIG_FTRACE_STARTUP_TEST=y
When update the latest mainline kernel with the above two configs (1)
and (2), the kernel starts normally, but it still hangs when execute
the following command:
echo "function_graph" > /sys/kernel/debug/tracing/current_tracer
Without CONFIG_PREEMPT_TRACER=y, the above two kinds of kernel hangs
disappeared, so it seems that CONFIG_PREEMPT_TRACER has some influences
with function_graph tracer at the first glance.
I use ejtag to find out the epc address is related with preempt_enable()
in the file arch/mips/lib/mips-atomic.c, because function tracing can
trace the preempt_{enable,disable} calls that are traced, replace them
with preempt_{enable,disable}_notrace to prevent function tracing from
going into an infinite loop, and then it can fix the kernel hang issue.
By the way, it seems that this commit is a complement and improvement of
commit f93a1a00f2 ("MIPS: Fix crash that occurs when function tracing
is enabled").
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a4dd4fc610 ]
In cops_probe1(), there is a write to dev->base_addr after requesting an
interrupt line and registering the interrupt handler cops_interrupt().
The handler might be called in parallel to handle an interrupt.
cops_interrupt() tries to read dev->base_addr leading to a potential
data race. So write to dev->base_addr before calling request_irq().
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Saubhik Mukherjee <saubhik.mukherjee@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5eff1461a6 ]
If runtime power menagement is enabled, the gigabit ethernet PLL would
be disabled after macb_probe(). During this period of time, the system
would hang up if we try to access GEMGXL control registers.
We can't put runtime_pm_get/runtime_pm_put/ there due to the issue of
sleep inside atomic section (7fa2955ff7 ("sh_eth: Fix sleeping
function called from invalid context"). Add netif_running checking to
ensure the device is available before accessing GEMGXL device.
Changed in v2:
- Use netif_running instead of its own flag
Signed-off-by: Zong Li <zong.li@sifive.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2ef7665dfd ]
Target de-configuration panics at high CPU load because TPGT and WWPN can
be removed on separate threads.
TPGT removal requests a reset HBA on a separate thread and waits for reset
complete (phase1). Due to high CPU load that HBA reset can be delayed for
some time.
WWPN removal does qlt_stop_phase2(). There it is believed that phase1 has
already completed and thus tgt.tgt_ops is subsequently cleared. However,
tgt.tgt_ops is needed to process incoming traffic and therefore this will
cause one of the following panics:
NIP qlt_reset+0x7c/0x220 [qla2xxx]
LR qlt_reset+0x68/0x220 [qla2xxx]
Call Trace:
0xc000003ffff63a78 (unreliable)
qlt_handle_imm_notify+0x800/0x10c0 [qla2xxx]
qlt_24xx_atio_pkt+0x208/0x590 [qla2xxx]
qlt_24xx_process_atio_queue+0x33c/0x7a0 [qla2xxx]
qla83xx_msix_atio_q+0x54/0x90 [qla2xxx]
or
NIP qlt_24xx_handle_abts+0xd0/0x2a0 [qla2xxx]
LR qlt_24xx_handle_abts+0xb4/0x2a0 [qla2xxx]
Call Trace:
qlt_24xx_handle_abts+0x90/0x2a0 [qla2xxx] (unreliable)
qlt_24xx_process_atio_queue+0x500/0x7a0 [qla2xxx]
qla83xx_msix_atio_q+0x54/0x90 [qla2xxx]
or
NIP qlt_create_sess+0x90/0x4e0 [qla2xxx]
LR qla24xx_do_nack_work+0xa8/0x180 [qla2xxx]
Call Trace:
0xc0000000348fba30 (unreliable)
qla24xx_do_nack_work+0xa8/0x180 [qla2xxx]
qla2x00_do_work+0x674/0xbf0 [qla2xxx]
qla2x00_iocb_work_fn
The patch fixes the issue by serializing qlt_stop_phase1() and
qlt_stop_phase2() functions to make WWPN removal wait for phase1
completion.
Link: https://lore.kernel.org/r/20210415203554.27890-1-d.bogdanov@yadro.com
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aced3ce57c ]
When TCP is used as transport and a program on the
system connects to RDS port 16385, connection is
accepted but denied per the rules of RDS. However,
RDS connections object is left in the list. Next
loopback connection will select that connection
object as it is at the head of list. The connection
attempt will hang as the connection object is set
to connect over TCP which is not allowed
The issue can be reproduced easily, use rds-ping
to ping a local IP address. After that use any
program like ncat to connect to the same IP
address and port 16385. This will hang so ctrl-c out.
Now try rds-ping, it will hang.
To fix the issue this patch adds checks to disallow
the connection object creation and destroys the
connection object.
Signed-off-by: Rao Shoaib <rao.shoaib@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 940d71c646 ]
If VCPU is suspended (VM suspend) in wq_watchdog_timer_fn() then
once this VCPU resumes it will see the new jiffies value, while it
may take a while before IRQ detects PVCLOCK_GUEST_STOPPED on this
VCPU and updates all the watchdogs via pvclock_touch_watchdogs().
There is a small chance of misreported WQ stalls in the meantime,
because new jiffies is time_after() old 'ts + thresh'.
wq_watchdog_timer_fn()
{
for_each_pool(pool, pi) {
if (time_after(jiffies, ts + thresh)) {
pr_emerg("BUG: workqueue lockup - pool");
}
}
}
Save jiffies at the beginning of this function and use that value
for stall detection. If VM gets suspended then we continue using
"old" jiffies value and old WQ touch timestamps. If IRQ at some
point restarts the stall detection cycle (pvclock_touch_watchdogs())
then old jiffies will always be before new 'ts + thresh'.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 45e1ba4083 ]
This patch effectively reverts the commit a3e72739b7 ("cgroup: fix
too early usage of static_branch_disable()"). The commit 6041186a32
("init: initialize jump labels before command line option parsing") has
moved the jump_label_init() before parse_args() which has made the
commit a3e72739b7 unnecessary. On the other hand there are
consequences of disabling the controllers later as there are subsystems
doing the controller checks for different decisions. One such incident
is reported [1] regarding the memory controller and its impact on memory
reclaim code.
[1] https://lore.kernel.org/linux-mm/921e53f3-4b13-aab8-4a9e-e83ff15371e4@nec.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Reported-by: NOMURA JUNICHI(野村 淳一) <junichi.nomura@nec.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Tested-by: Jun'ichi Nomura <junichi.nomura@nec.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1dde47a66d ]
We spotted a bug recently during a review where a driver was
unregistering a bus that wasn't registered, which would trigger this
BUG_ON(). Let's handle that situation more gracefully, and just print
a warning and return.
Reported-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1d482e666b ]
Syzbot reports that in mac80211 we have a potential deadlock
between our "local->stop_queue_reasons_lock" (spinlock) and
netlink's nl_table_lock (rwlock). This is because there's at
least one situation in which we might try to send a netlink
message with this spinlock held while it is also possible to
take the spinlock from a hardirq context, resulting in the
following deadlock scenario reported by lockdep:
CPU0 CPU1
---- ----
lock(nl_table_lock);
local_irq_disable();
lock(&local->queue_stop_reason_lock);
lock(nl_table_lock);
<Interrupt>
lock(&local->queue_stop_reason_lock);
This seems valid, we can take the queue_stop_reason_lock in
any kind of context ("CPU0"), and call ieee80211_report_ack_skb()
with the spinlock held and IRQs disabled ("CPU1") in some
code path (ieee80211_do_stop() via ieee80211_free_txskb()).
Short of disallowing netlink use in scenarios like these
(which would be rather complex in mac80211's case due to
the deep callchain), it seems the only fix for this is to
disable IRQs while nl_table_lock is held to avoid hitting
this scenario, this disallows the "CPU0" portion of the
reported deadlock.
Note that the writer side (netlink_table_grab()) already
disables IRQs for this lock.
Unfortunately though, this seems like a huge hammer, and
maybe the whole netlink table locking should be reworked.
Reported-by: syzbot+69ff9dff50dcfe14ddd4@syzkaller.appspotmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 35d96e6318 ]
If bond_kobj_init() or later kzalloc() in bond_alloc_slave() fail,
then we call kobject_put() on the slave->kobj. This in turn calls
the release function slave_kobj_release() which will always try to
cancel_delayed_work_sync(&slave->notify_work), which shouldn't be
done on an uninitialized work struct.
Always initialize the work struct earlier to avoid problems here.
Syzbot bisected this down to a completely pointless commit, some
fault injection may have been at work here that caused the alloc
failure in the first place, which may interact badly with bisect.
Reported-by: syzbot+bfda097c12a00c8cae67@syzkaller.appspotmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
