commit c1472ec1dc4419d0bae663c1a1e6cb98dc7881ad upstream.
A bus_dma_limit was added for l3 bus by commit cfb5d65f25
("ARM: dts: dra7: Add bus_dma_limit for L3 bus") to fix an issue
observed only with SATA on DRA7-EVM with 4GB RAM and CONFIG_ARM_LPAE
enabled.
Since kernel 5.13, the SATA issue can be reproduced again following
the SATA node move from L3 bus to L4_cfg in commit 8af15365a3
("ARM: dts: Configure interconnect target module for dra7 sata").
Fix it by adding an empty dma-ranges property to l4_cfg and
segment@100000 nodes (parent device tree node of SATA controller) to
inherit the 2GB dma ranges limit from l3 bus node.
Note: A similar fix was applied for PCIe controller by commit
90d4d3f4ea ("ARM: dts: dra7: Fix bus_dma_limit for PCIe").
Fixes: 8af15365a3 ("ARM: dts: Configure interconnect target module for dra7 sata").
Link: https://lore.kernel.org/linux-omap/c583e1bb-f56b-4489-8012-ce742e85f233@smile.fr/
Cc: stable@vger.kernel.org # 5.13
Signed-off-by: Romain Naour <romain.naour@skf.com>
Link: https://lore.kernel.org/r/20241115102537.1330300-1-romain.naour@smile.fr
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 97bbf9e312c3fbaf0baa56120238825d2eb23b8a upstream.
Added a check for ubi_num for negative numbers
If the variable ubi_num takes negative values then we get:
qemu-system-arm ... -append "ubi.mtd=0,0,0,-22222345" ...
[ 0.745065] ubi_attach_mtd_dev from ubi_init+0x178/0x218
[ 0.745230] ubi_init from do_one_initcall+0x70/0x1ac
[ 0.745344] do_one_initcall from kernel_init_freeable+0x198/0x224
[ 0.745474] kernel_init_freeable from kernel_init+0x18/0x134
[ 0.745600] kernel_init from ret_from_fork+0x14/0x28
[ 0.745727] Exception stack(0x90015fb0 to 0x90015ff8)
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 83ff59a066 ("UBI: support ubi_num on mtd.ubi command line")
Cc: stable@vger.kernel.org
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c21bdb3d8a850afdfa4afe77eea39ae9533629b0 upstream.
Starting with Rust 1.86.0 (currently in nightly, to be released on
2025-04-03), the `missing_abi` lint is warn-by-default [1]:
error: extern declarations without an explicit ABI are deprecated
--> rust/doctests_kernel_generated.rs:3158:1
|
3158 | extern {
| ^^^^^^ help: explicitly specify the C ABI: `extern "C"`
|
= note: `-D missing-abi` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(missing_abi)]`
Thus clean it up.
Cc: <stable@vger.kernel.org> # Needed in 6.12.y and 6.13.y only (Rust is pinned in older LTSs).
Fixes: 7f8977a7fe ("rust: init: add `{pin_}chain` functions to `{Pin}Init<T, E>`")
Link: https://github.com/rust-lang/rust/pull/132397 [1]
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Link: https://lore.kernel.org/r/20250121200934.222075-1-ojeda@kernel.org
[ Added 6.13.y to Cc: stable tag. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8f6629c004b193d23612641c3607e785819e97ab upstream.
-Wenum-enum-conversion was strengthened in clang-19 to warn for C, which
caused the kernel to move it to W=1 in commit 75b5ab134bb5 ("kbuild:
Move -Wenum-{compare-conditional,enum-conversion} into W=1") because
there were numerous instances that would break builds with -Werror.
Unfortunately, this is not a full solution, as more and more developers,
subsystems, and distributors are building with W=1 as well, so they
continue to see the numerous instances of this warning.
Since the move to W=1, there have not been many new instances that have
appeared through various build reports and the ones that have appeared
seem to be following similar existing patterns, suggesting that most
instances of this warning will not be real issues. The only alternatives
for silencing this warning are adding casts (which is generally seen as
an ugly practice) or refactoring the enums to macro defines or a unified
enum (which may be undesirable because of type safety in other parts of
the code).
Move the warning to W=2, where warnings that occur frequently but may be
relevant should reside.
Cc: stable@vger.kernel.org
Fixes: 75b5ab134bb5 ("kbuild: Move -Wenum-{compare-conditional,enum-conversion} into W=1")
Link: https://lore.kernel.org/ZwRA9SOcOjjLJcpi@google.com/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 87c4b5e8a6b65189abd9ea5010ab308941f964a4 upstream.
In StorVSC, payload->range.len is used to indicate if this SCSI command
carries payload. This data is allocated as part of the private driver data
by the upper layer and may get passed to lower driver uninitialized.
For example, the SCSI error handling mid layer may send TEST_UNIT_READY or
REQUEST_SENSE while reusing the buffer from a failed command. The private
data section may have stale data from the previous command.
If the SCSI command doesn't carry payload, the driver may use this value as
is for communicating with host, resulting in possible corruption.
Fix this by always initializing this value.
Fixes: be0cf6ca30 ("scsi: storvsc: Set the tablesize based on the information given by the host")
Cc: stable@kernel.org
Tested-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://lore.kernel.org/r/1737601642-7759-1-git-send-email-longli@linuxonhyperv.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 98b37881b7492ae9048ad48260cc8a6ee9eb39fd upstream.
Commit 9604eea5bd ("scsi: st: Add third party poweron reset handling") in
v6.6 added new code to handle the Power On/Reset Unit Attention (POR UA)
sense data. This was in addition to the existing method. When this Unit
Attention is received, the driver blocks attempts to read, write and some
other operations because the reset may have rewinded the tape. Because of
the added code, also the initial POR UA resulted in blocking operations,
including those that are used to set the driver options after the device is
recognized. Also, reading and writing are refused, whereas they succeeded
before this commit.
Add code to not set pos_unknown to block operations if the POR UA is
received from the first test_ready() call after the st device has been
created. This restores the behavior before v6.6.
Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi>
Link: https://lore.kernel.org/r/20241216113755.30415-1-Kai.Makisara@kolumbus.fi
Fixes: 9604eea5bd ("scsi: st: Add third party poweron reset handling")
CC: stable@vger.kernel.org
Closes: https://lore.kernel.org/linux-scsi/2201CF73-4795-4D3B-9A79-6EE5215CF58D@kolumbus.fi/
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 11cb3529d18514f7d28ad2190533192aedefd761 upstream.
On the TUXEDO InfinityBook Pro Gen9 Intel, a Samsung 990 Evo NVMe leads to
a high power consumption in s2idle sleep (4 watts).
This patch applies 'Force No Simple Suspend' quirk to achieve a sleep with
a lower power consumption, typically around 1.2 watts.
Signed-off-by: Georg Gottleuber <ggo@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dbf2bb1a1319b7c7d8828905378a6696cca6b0f2 upstream.
On the TUXEDO InfinityFlex, a Samsung 990 Evo NVMe leads to a high power
consumption in s2idle sleep (4 watts).
This patch applies 'Force No Simple Suspend' quirk to achieve a sleep with
a lower power consumption, typically around 1.4 watts.
Signed-off-by: Georg Gottleuber <ggo@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b1049f2d68693c80a576c4578d96774a68df2bad upstream.
commit 9d26d3a8f1 ("PCI: Put PCIe ports into D3 during suspend") sets the
policy that all PCIe ports are allowed to use D3. When the system is
suspended if the port is not power manageable by the platform and won't be
used for wakeup via a PME this sets up the policy for these ports to go
into D3hot.
This policy generally makes sense from an OSPM perspective but it leads to
problems with wakeup from suspend on the TUXEDO Sirius 16 Gen 1 with a
specific old BIOS. This manifests as a system hang.
On the affected Device + BIOS combination, add a quirk for the root port of
the problematic controller to ensure that these root ports are not put into
D3hot at suspend.
This patch is based on
https://lore.kernel.org/linux-pci/20230708214457.1229-2-mario.limonciello@amd.com
but with the added condition both in the documentation and in the code to
apply only to the TUXEDO Sirius 16 Gen 1 with a specific old BIOS and only
the affected root ports.
Fixes: 9d26d3a8f1 ("PCI: Put PCIe ports into D3 during suspend")
Suggested-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250114222436.1075456-1-wse@tuxedocomputers.com
Co-developed-by: Georg Gottleuber <ggo@tuxedocomputers.com>
Signed-off-by: Georg Gottleuber <ggo@tuxedocomputers.com>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Cc: <stable@vger.kernel.org> # 6.1+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b615fbd70fce8582d92b3bdbbf3c9b80cadcfb55 upstream.
For interrupt-map entries, the DTS specification requires
that #address-cells is defined for both the child node and the
interrupt parent. For the PCIe interrupt-map entries, the parent
node ("gic") has not specified #address-cells. The existing layout
of the PCIe interrupt-map entries indicates that it assumes
that #address-cells is zero for this node.
Explicitly set #address-cells to zero for "gic" so that it complies
with the device tree specification.
NVIDIA EDK2 works around this issue by assuming #address-cells
is zero in this scenario, but that workaround is being removed and so
this update is needed or else NVIDIA EDK2 cannot successfully parse the
device tree and the board cannot boot.
Fixes: ec142c44b0 ("arm64: tegra: Add P2U and PCIe controller nodes to Tegra234 DT")
Signed-off-by: Brad Griffis <bgriffis@nvidia.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20241213235602.452303-1-bgriffis@nvidia.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8004d635f27bbccaa5c083c50d4d5302a6ffa00e upstream.
This reverts commit 3dd075fe8ebbc6fcbf998f81a75b8c4b159a6195.
Tomasz has reported that his device, Generalplus Technology Inc. 808 Camera,
with ID 1b3f:2002, stopped being detected:
$ ls -l /dev/video*
zsh: no matches found: /dev/video*
[ 7.230599] usb 3-2: Found multiple Units with ID 5
This particular device is non-compliant, having both the Output Terminal
and Processing Unit with ID 5. uvc_scan_fallback, though, is able to build
a chain. However, when media elements are added and uvc_mc_create_links
call uvc_entity_by_id, it will get the incorrect entity,
media_create_pad_link will WARN, and it will fail to register the entities.
In order to reinstate support for such devices in a timely fashion,
reverting the fix for these warnings is appropriate. A proper fix that
considers the existence of such non-compliant devices will be submitted in
a later development cycle.
Reported-by: Tomasz Sikora <sikora.tomus@gmail.com>
Fixes: 3dd075fe8ebb ("media: uvcvideo: Require entities to have a non-zero unique ID")
Cc: stable@vger.kernel.org
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250114200045.1401644-1-cascardo@igalia.com
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b13ee668e8280ca5b07f8ce2846b9957a8a10853 upstream.
blkdev_read_iter() has a few odd checks, like gating the position and
count adjustment on whether or not the result is bigger-than-or-equal to
zero (where bigger than makes more sense), and not checking the return
value of blkdev_direct_IO() before doing an iov_iter_revert(). The
latter can lead to attempting to revert with a negative value, which
when passed to iov_iter_revert() as an unsigned value will lead to
throwing a WARN_ON() because unroll is bigger than MAX_RW_COUNT.
Be sane and don't revert for -EIOCBQUEUED, like what is done in other
spots.
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 42a39e4aa59a10aa4afdc14194f3ee63d2db94e1 upstream.
Currently, installation of Debian 12.8 for mipsel fails on machines
without an FPU [1]. This is caused by the fact that zstd (which is used
for initramfs compression) executes the prefx instruction, which is not
emulated properly by the kernel.
The prefx (Prefetch Indexed) instruction fetches data from memory into
the cache without any side effects. Though functionally unrelated, it
requires an FPU [2].
Bytecode format of this instruction ends on "001111" binary:
(prefx instruction format) & 0x0000003f = 0x0000000f
The code in fpux_emu() runs like so:
#define MIPSInst(x) x
#define MIPSInst_FMA_FFMT(x) (MIPSInst(x) & 0x00000007)
#define MIPSInst_FUNC(x) (MIPSInst(x) & 0x0000003f)
enum cop1x_func { ..., pfetch_op = 0x0f, ... };
...
switch (MIPSInst_FMA_FFMT(ir)) {
...
case 0x3:
if (MIPSInst_FUNC(ir) != pfetch_op)
return SIGILL;
/* ignore prefx operation */
break;
default:
return SIGILL;
}
That snippet above contains a logic error and the
if (MIPSInst_FUNC(ir) != pfetch_op)
comparison always fires.
When MIPSInst_FUNC(ir) is equal to pfetch_op, ir must end on 001111
binary. In this case, MIPSInst_FMA_FFMT(ir) must be equal to 0x7, which
does not match that case label.
This causes emulation failure for the prefx instruction. Fix it.
This has been broken by
commit 919af8b96c ("MIPS: Make definitions of MIPSInst_FMA_{FUNC,FMTM} consistent with MIPS64 manual")
which modified the MIPSInst_FMA_FFMT macro without updating the users.
Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Cc: stable@vger.kernel.org # after 3 weeks
Cc: Dengcheng Zhu <dzhu@wavecomp.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Fixes: 919af8b96c ("MIPS: Make definitions of MIPSInst_FMA_{FUNC,FMTM} consistent with MIPS64 manual")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[1] https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1091858
[2] MIPS Architecture For Programmers Volume II-A: The MIPS32 Instruction Set
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
commit 8b8f8037765757861f899ed3a2bfb34525b5c065 upstream.
dm-crypt uses tag_offset to index the integrity metadata for each crypt
sector. When the initial crypt_convert() returns BLK_STS_DEV_RESOURCE,
dm-crypt will try to continue the crypt/decrypt procedure in a kworker.
However, it resets tag_offset as zero instead of using the tag_offset
related with current sector. It may return unexpected data when using
random IV or return unexpected integrity related error.
Fix the problem by tracking tag_offset in per-IO convert_context.
Therefore, when the crypt/decrypt procedure continues in a kworker, it
could use the next tag_offset saved in convert_context.
Fixes: 8abec36d12 ("dm crypt: do not wait for backlogged crypto request completion in softirq")
Cc: stable@vger.kernel.org
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9fdbbdbbc92b1474a87b89f8b964892a63734492 upstream.
The updates of io->sector are the leftovers when dm-crypt allocated
pages for partial write request. However, since commit cf2f1abfbd
("dm crypt: don't allocate pages for a partial request"), there is no
partial request anymore.
After the introduction of write request rb-tree, the updates of
io->sectors may interfere the insertion procedure, because ->sectors of
these write requests which have already been added in the rb-tree may be
changed during the insertion of new write request.
Fix it by removing these buggy updates of io->sectors. Considering these
updates only effect the write request rb-tree, the commit which
introduces the write request rb-tree is used as the fix tag.
Fixes: b3c5fd3052 ("dm crypt: sort writes")
Cc: stable@vger.kernel.org
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 11b93559000c686ad7e5ab0547e76f21cc143844 upstream.
The PE Reset State "0" returned by RTAS calls
"ibm_read_slot_reset_[state|state2]" indicates that the reset is
deactivated and the PE is in a state where MMIO and DMA are allowed.
However, the current implementation of "pseries_eeh_get_state()" does
not reflect this, causing drivers to incorrectly assume that MMIO and
DMA operations cannot be resumed.
The userspace drivers as a part of EEH recovery using VFIO ioctls fail
to detect when the recovery process is complete. The VFIO_EEH_PE_GET_STATE
ioctl does not report the expected EEH_PE_STATE_NORMAL state, preventing
userspace drivers from functioning properly on pseries systems.
The patch addresses this issue by updating 'pseries_eeh_get_state()'
to include "EEH_STATE_MMIO_ENABLED" and "EEH_STATE_DMA_ENABLED" in
the result mask for PE Reset State "0". This ensures correct state
reporting to the callers, aligning the behavior with the PAPR specification
and fixing the bug in EEH recovery for VFIO user workflows.
Fixes: 00ba05a12b ("powerpc/pseries: Cleanup on pseries_eeh_get_state()")
Cc: stable@vger.kernel.org
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Narayana Murty N <nnmlinux@linux.ibm.com>
Link: https://lore.kernel.org/stable/20241212075044.10563-1-nnmlinux%40linux.ibm.com
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250116103954.17324-1-nnmlinux@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 531936dee53e471a3ec668de3c94ca357f54b7e8 upstream.
The maximum number of load/store watchpoints and fetch instruction
watchpoints is 14 each according to LoongArch Reference Manual, so
extend the maximum number of watchpoints from 8 to 14 for ptrace.
By the way, just simply change 8 to 14 for the definition in struct
user_watch_state at the beginning, but it may corrupt uapi, then add
a new struct user_watch_state_v2 directly.
As far as I can tell, the only users for this struct in the userspace
are GDB and LLDB, there are no any problems of software compatibility
between the application and kernel according to the analysis.
The compatibility problem has been considered while developing and
testing. When the applications in the userspace get watchpoint state,
the length will be specified which is no bigger than the sizeof struct
user_watch_state or user_watch_state_v2, the actual length is assigned
as the minimal value of the application and kernel in the generic code
of ptrace:
kernel/ptrace.c: ptrace_regset():
kiov->iov_len = min(kiov->iov_len,
(__kernel_size_t) (regset->n * regset->size));
if (req == PTRACE_GETREGSET)
return copy_regset_to_user(task, view, regset_no, 0,
kiov->iov_len, kiov->iov_base);
else
return copy_regset_from_user(task, view, regset_no, 0,
kiov->iov_len, kiov->iov_base);
For example, there are four kind of combinations, all of them work well.
(1) "older kernel + older gdb", the actual length is 8+(8+8+4+4)*8=200;
(2) "newer kernel + newer gdb", the actual length is 8+(8+8+4+4)*14=344;
(3) "older kernel + newer gdb", the actual length is 8+(8+8+4+4)*8=200;
(4) "newer kernel + older gdb", the actual length is 8+(8+8+4+4)*8=200.
Link: https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#control-and-status-registers-related-to-watchpoints
Cc: stable@vger.kernel.org
Fixes: 1a69f7a161 ("LoongArch: ptrace: Expose hardware breakpoints to debuggers")
Reviewed-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bd2212d658d7659b9d83c7e2f3a06789d4db1e90 upstream.
Per Appendix A.7 in Q/LS 0013-2014 (龙芯CPU开发系统固件与内核接口规范 V2.2,
lit. Loongson DevSys Firmware Kernel Interface Specification V2.2),
interface_info.size is size of this interface, not size of the LEFI BIOS
ROM.
In any case, the BIOS ROM Size just cannot be several kilobytes (KB) on
Loongson64 LEFI platforms.
Reported-by: Mingcong Bai <jeffbai@aosc.io>
Suggested-by: Icenowy Zheng <uwu@icenowy.me>
Fixes: 6c1bfbd9df ("MIPS: Loongson64: Add /sys/firmware/lefi/boardinfo")
Cc: stable@vger.kernel.org
Signed-off-by: Kexy Biscuit <kexybiscuit@aosc.io>
Acked-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 22cf4fae6660b6e1a583a41cbf84e3046ca9ccd0 upstream.
On MSM8916 devices, the serial number exposed in sysfs is constant and does
not change across individual devices. It's always:
db410c:/sys/devices/soc0$ cat serial_number
2644893864
The firmware used on MSM8916 exposes SOCINFO_VERSION(0, 8), which does not
have support for the serial_num field in the socinfo struct. There is an
existing check to avoid exposing the serial number in that case, but it's
not correct: When checking the item_size returned by SMEM, we need to make
sure the *end* of the serial_num is within bounds, instead of comparing
with the *start* offset. The serial_number currently exposed on MSM8916
devices is just an out of bounds read of whatever comes after the socinfo
struct in SMEM.
Fix this by changing offsetof() to offsetofend(), so that the size of the
field is also taken into account.
Cc: stable@vger.kernel.org
Fixes: efb448d0a3 ("soc: qcom: Add socinfo driver")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241230-qcom-socinfo-serialno-oob-v1-1-9b7a890da3da@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit be154b598fa54136e2be17d6dd13c8a8bc0078ce upstream.
Clarify that the "NCM" implementation in `ipheth` is very limited, as
iOS devices aren't compatible with the CDC NCM specification in regular
tethering mode.
For a standards-compliant implementation, one shall turn to
the `cdc_ncm` module.
Cc: stable@vger.kernel.org # 6.5.x
Signed-off-by: Foster Snowhill <forst@pen.gy>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ee591f2b281721171896117f9946fced31441418 upstream.
Fix an out-of-bounds DPE read, limit the number of processed DPEs to
the amount that fits into the fixed-size NDP16 header.
Fixes: a2d274c62e ("usbnet: ipheth: add CDC NCM support")
Cc: stable@vger.kernel.org
Signed-off-by: Foster Snowhill <forst@pen.gy>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit efcbc678a14be268040ffc1fa33c98faf2d55141 upstream.
Originally, the total NCM header size was computed as the sum of two
vaguely labelled constants. While accurate, it wasn't particularly clear
where they were coming from.
Use sizes of existing NCM structs where available. Define the total
NDP16 size based on the maximum amount of DPEs that can fit into the
iOS-specific fixed-size header.
This change does not fix any particular issue. Rather, it introduces
intermediate constants that will simplify subsequent commits.
It should also make it clearer for the reader where the constant values
come from.
Cc: stable@vger.kernel.org # 6.5.x
Signed-off-by: Foster Snowhill <forst@pen.gy>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2a9a196429e98fcc64078366c2679bc40aba5466 upstream.
Introduce an rx_error label to reduce repetitions in the header
signature checks.
Store wDatagramIndex and wDatagramLength after endianness conversion to
avoid repeated le16_to_cpu() calls.
Rewrite the loop to return on a null trailing DPE, which is required
by the CDC NCM spec. In case it is missing, fall through to rx_error.
This change does not fix any particular issue. Its purpose is to
simplify a subsequent commit that fixes a potential OoB read by limiting
the maximum amount of processed DPEs.
Cc: stable@vger.kernel.org # 6.5.x
Signed-off-by: Foster Snowhill <forst@pen.gy>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 429fa68b58cefb9aa9de27e4089637298b46b757 upstream.
By definition, a DPE points at the start of a network frame/datagram.
Thus it makes no sense for it to point at anything that's part of the
NCM header. It is not a security issue, but merely an indication of
a malformed DPE.
Enforce that all DPEs point at the data portion of the URB, past the
NCM header.
Fixes: a2d274c62e ("usbnet: ipheth: add CDC NCM support")
Cc: stable@vger.kernel.org
Signed-off-by: Foster Snowhill <forst@pen.gy>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 86586dcb75cb8fd062a518aca8ee667938b91efb upstream.
Original code allowed for the start of NDP16 to be anywhere within the
URB based on the `wNdpIndex` value in NTH16. Only the start position of
NDP16 was checked, so it was possible for even the fixed-length part
of NDP16 to extend past the end of URB, leading to an out-of-bounds
read.
On iOS devices, the NDP16 header always directly follows NTH16. Rely on
and check for this specific format.
This, along with NCM-specific minimal URB length check that already
exists, will ensure that the fixed-length part of NDP16 plus a set
amount of DPEs fit within the URB.
Note that this commit alone does not fully address the OoB read.
The limit on the amount of DPEs needs to be enforced separately.
Fixes: a2d274c62e ("usbnet: ipheth: add CDC NCM support")
Cc: stable@vger.kernel.org
Signed-off-by: Foster Snowhill <forst@pen.gy>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c219427ed296f94bb4b91d08626776dc7719ee27 upstream.
Originally, it was possible for the DPE length check to overflow if
wDatagramIndex + wDatagramLength > U16_MAX. This could lead to an OoB
read.
Move the wDatagramIndex term to the other side of the inequality.
An existing condition ensures that wDatagramIndex < urb->actual_length.
Fixes: a2d274c62e ("usbnet: ipheth: add CDC NCM support")
Cc: stable@vger.kernel.org
Signed-off-by: Foster Snowhill <forst@pen.gy>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 57af267d2b8f5d88485c6372761386d79c5e6a1a upstream.
Due to a limitation in available memory, the MT7916 firmware can only
handle either 5 GHz or 6 GHz at a time. It does not support runtime
switching without a full restart.
On older firmware, this accidentally worked to some degree due to missing
checks, but couldn't be supported properly, because it left the 6 GHz
channels uncalibrated.
Newer firmware refuses to start on either band if the passed EEPROM
data indicates support for both.
Deal with this limitation by using a module parameter to specify the
preferred band in case both are supported.
Fixes: b4d093e321 ("mt76: mt7915: add 6 GHz support")
Cc: stable@vger.kernel.org
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20241010083816.51880-1-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 68abd0c4ebf24cd499841a488b97a6873d5efabb upstream.
On removal of the device or unloading of the kernel module a potential NULL
pointer dereference occurs.
The following sequence deletes the interface:
brcmf_detach()
brcmf_remove_interface()
brcmf_del_if()
Inside the brcmf_del_if() function the drvr->if2bss[ifidx] is updated to
BRCMF_BSSIDX_INVALID (-1) if the bsscfgidx matches.
After brcmf_remove_interface() call the brcmf_proto_detach() function is
called providing the following sequence:
brcmf_detach()
brcmf_proto_detach()
brcmf_proto_msgbuf_detach()
brcmf_flowring_detach()
brcmf_msgbuf_delete_flowring()
brcmf_msgbuf_remove_flowring()
brcmf_flowring_delete()
brcmf_get_ifp()
brcmf_txfinalize()
Since brcmf_get_ip() can and actually will return NULL in this case the
call to brcmf_txfinalize() will result in a NULL pointer dereference inside
brcmf_txfinalize() when trying to update ifp->ndev->stats.tx_errors.
This will only happen if a flowring still has an skb.
Although the NULL pointer dereference has only been seen when trying to
update the tx statistic, all other uses of the ifp pointer have been
guarded as well with an early return if ifp is NULL.
Cc: stable@vger.kernel.org
Signed-off-by: Marcel Hamer <marcel.hamer@windriver.com>
Link: https://lore.kernel.org/all/b519e746-ddfd-421f-d897-7620d229e4b2@gmail.com/
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20250116132240.731039-1-marcel.hamer@windriver.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8a5b38c3fd709e8acd2bfdedf66c25e6af759576 upstream.
The hid-sensor-hub creates the individual device structs and transfers them
to the created mfd platform-devices via the platform_data in the mfd_cell.
Before e651a1da44 ("HID: hid-sensor-hub: Allow parallel synchronous reads")
the sensor-hub was managing access centrally, with one "completion" in the
hub's data structure, which needed to be finished on removal at the latest.
The mentioned commit then moved this central management to each hid sensor
device, resulting on a completion in each struct hid_sensor_hub_device.
The remove procedure was adapted to go through all sensor devices and
finish any pending "completion".
What this didn't take into account was, platform_device_add_data() that is
used by mfd_add{_hotplug}_devices() does a kmemdup on the submitted
platform-data. So the data the platform-device gets is a copy of the
original data, meaning that the device worked on a different completion
than what sensor_hub_remove() currently wants to access.
To fix that, use device_for_each_child() to go through each child-device
similar to how mfd_remove_devices() unregisters the devices later and
with that get the live platform_data to finalize the correct completion.
Fixes: e651a1da44 ("HID: hid-sensor-hub: Allow parallel synchronous reads")
Cc: stable@vger.kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Jiri Kosina <jkosina@suse.com>
Link: https://lore.kernel.org/r/20241107114712.538976-2-heiko@sntech.de
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b9e58c934c56aa35b0fb436d9afd86ef326bae0e upstream.
of_find_node_opts_by_path() fails to find OF device node when its
@path parameter have pattern below:
"alias-name/node-name-1/.../node-name-N:options".
The reason is that alias name length calculated by the API is wrong, as
explained by example below:
"testcase-alias/phandle-tests/consumer-a:testaliasoption".
^ ^ ^
0 14 39
The right length of alias 'testcase-alias' is 14, but the result worked
out by the API is 39 which is obvious wrong.
Fix by using index of either '/' or ':' as the length who comes earlier.
Fixes: 75c28c09af ("of: add optional options parameter to of_find_node_by_path()")
Cc: stable@vger.kernel.org
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20241216-of_core_fix-v2-1-e69b8f60da63@quicinc.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e4c00c9b1f70cd11792ff5b825899a6ee0234a62 upstream.
API of_parse_phandle_with_args_map() will use wrong input for nexus node
Nexus_2 as shown below:
Node_1 Nexus_1 Nexus_2
&Nexus_1,arg_1 -> arg_1,&Nexus_2,arg_2' -> &Nexus_2,arg_2 -> arg_2,...
map-pass-thru=<...>
Nexus_1's output arg_2 should be used as input of Nexus_2, but the API
wrongly uses arg_2' instead which != arg_2 due to Nexus_1's map-pass-thru.
Fix by always making @match_array point to @initial_match_array into
which to store nexus output.
Fixes: bd6f2fd5a1 ("of: Support parsing phandle argument lists through a nexus node")
Cc: stable@vger.kernel.org
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20250109-of_core_fix-v4-1-db8a72415b8c@quicinc.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 62892e77b8a64b9dc0e1da75980aa145347b6820 upstream.
The comparison function cmpworker() violates the C standard's
requirements for qsort() comparison functions, which mandate symmetry
and transitivity:
Symmetry: If x < y, then y > x.
Transitivity: If x < y and y < z, then x < z.
In its current implementation, cmpworker() incorrectly returns 0 when
w1->tid < w2->tid, which breaks both symmetry and transitivity. This
violation causes undefined behavior, potentially leading to issues such
as memory corruption in glibc [1].
Fix the issue by returning -1 when w1->tid < w2->tid, ensuring
compliance with the C standard and preventing undefined behavior.
Link: https://www.qualys.com/2024/01/30/qsort.txt [1]
Fixes: 121dd9ea01 ("perf bench: Add epoll parallel epoll_wait benchmark")
Cc: stable@vger.kernel.org
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250116110842.4087530-1-visitorckw@gmail.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
