[ Upstream commit ac931d4cde ]
Today ipip devices in collect-metadata mode don't allow for sending FOU
or GUE encapsulated packets. This patch lifts the restriction by adding
a struct ip_tunnel_encap to the tunnel metadata.
On the egress path, the members of this struct can be set by the
bpf_skb_set_fou_encap kfunc via a BPF tc-hook. Instead of dropping packets
wishing to use additional UDP encapsulation, ip_md_tunnel_xmit now
evaluates the contents of this struct and adds the corresponding FOU or
GUE header. Furthermore, it is making sure that additional header bytes
are taken into account for PMTU discovery.
On the ingress path, an ipip device in collect-metadata mode will fill this
struct and a BPF tc-hook can obtain the information via a call to the
bpf_skb_get_fou_encap kfunc.
The minor change to ip_tunnel_encap, which now takes a pointer to
struct ip_tunnel_encap instead of struct ip_tunnel, allows us to control
FOU encap type and parameters on a per packet-level.
Signed-off-by: Christian Ehrig <cehrig@cloudflare.com>
Link: https://lore.kernel.org/r/cfea47de655d0f870248abf725932f851b53960a.1680874078.git.cehrig@cloudflare.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Stable-dep-of: b5a7b661a073 ("net: Fix netns for ip_tunnel_init_flow()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2b6ffcd7873b7e8a62c3e15a6f305bfc747c466b ]
Current implementation of stmmac_probe_config_dt() does not release the
OF node reference obtained by of_parse_phandle() in some error paths.
The problem is that some error paths call stmmac_remove_config_dt() to
clean up but others use and unwind ladder. These two types of error
handling have not kept in sync and have been a recurring source of bugs.
Re-write the error handling in stmmac_probe_config_dt() to use an unwind
ladder. Consequently, stmmac_remove_config_dt() is not needed anymore,
thus remove it.
This bug was found by an experimental verification tool that I am
developing.
Fixes: 4838a54050 ("net: stmmac: Fix wrapper drivers not detecting PHY")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Link: https://patch.msgid.link/20241219024119.2017012-1-joe@pf.is.s.u-tokyo.ac.jp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f3c2caacee824ce4a331cdafb0b8dc8e987f105e ]
Currently a MDIO bus is created if the devicetree description is either:
1. Not fixed-link
2. fixed-link but contains a MDIO bus as well
The "1" case above isn't always accurate. If there's a phy-handle,
it could be referencing a phy on another MDIO controller's bus[1]. In
this case, where the MDIO bus is not described at all, currently
stmmac will make a MDIO bus and scan its address space to discover
phys (of which there are none). This process takes time scanning a bus
that is known to be empty, delaying time to complete probe.
There are also a lot of upstream devicetrees[2] that expect a MDIO bus
to be created, scanned for phys, and the first one found connected
to the MAC. This case can be inferred from the platform description by
not having a phy-handle && not being fixed-link. This hits case "1" in
the current driver's logic, and must be handled in any logic change here
since it is a valid legacy dt-binding.
Let's improve the logic to create a MDIO bus if either:
- Devicetree contains a MDIO bus
- !fixed-link && !phy-handle (legacy handling)
This way the case where no MDIO bus should be made is handled, as well
as retaining backwards compatibility with the valid cases.
Below devicetree snippets can be found that explain some of
the cases above more concretely.
Here's[0] a devicetree example where the MAC is both fixed-link and
driving a switch on MDIO (case "2" above). This needs a MDIO bus to
be created:
&fec1 {
phy-mode = "rmii";
fixed-link {
speed = <100>;
full-duplex;
};
mdio1: mdio {
switch0: switch0@0 {
compatible = "marvell,mv88e6190";
pinctrl-0 = <&pinctrl_gpio_switch0>;
};
};
};
Here's[1] an example where there is no MDIO bus or fixed-link for
the ethernet1 MAC, so no MDIO bus should be created since ethernet0
is the MDIO master for ethernet1's phy:
ðernet0 {
phy-mode = "sgmii";
phy-handle = <&sgmii_phy0>;
mdio {
compatible = "snps,dwmac-mdio";
sgmii_phy0: phy@8 {
compatible = "ethernet-phy-id0141.0dd4";
reg = <0x8>;
device_type = "ethernet-phy";
};
sgmii_phy1: phy@a {
compatible = "ethernet-phy-id0141.0dd4";
reg = <0xa>;
device_type = "ethernet-phy";
};
};
};
ðernet1 {
phy-mode = "sgmii";
phy-handle = <&sgmii_phy1>;
};
Finally there's descriptions like this[2] which don't describe the
MDIO bus but expect it to be created and the whole address space
scanned for a phy since there's no phy-handle or fixed-link described:
&gmac {
phy-supply = <&vcc_lan>;
phy-mode = "rmii";
snps,reset-gpio = <&gpio3 RK_PB4 GPIO_ACTIVE_HIGH>;
snps,reset-active-low;
snps,reset-delays-us = <0 10000 1000000>;
};
[0] https://elixir.bootlin.com/linux/v6.5-rc5/source/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts
[1] https://elixir.bootlin.com/linux/v6.6-rc5/source/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
[2] https://elixir.bootlin.com/linux/v6.6-rc5/source/arch/arm64/boot/dts/rockchip/rk3368-r88.dts#L164
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Co-developed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 2b6ffcd7873b ("net: stmmac: restructure the error path of stmmac_probe_config_dt()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e3debdd48423d3d75b9d366399228d7225d902cd ]
Flush CQE handler has not been called if QP state gets into errored
mode in DWQE path. So, the new added outstanding WQEs will never be
flushed.
It leads to a hung task timeout when using NFS over RDMA:
__switch_to+0x7c/0xd0
__schedule+0x350/0x750
schedule+0x50/0xf0
schedule_timeout+0x2c8/0x340
wait_for_common+0xf4/0x2b0
wait_for_completion+0x20/0x40
__ib_drain_sq+0x140/0x1d0 [ib_core]
ib_drain_sq+0x98/0xb0 [ib_core]
rpcrdma_xprt_disconnect+0x68/0x270 [rpcrdma]
xprt_rdma_close+0x20/0x60 [rpcrdma]
xprt_autoclose+0x64/0x1cc [sunrpc]
process_one_work+0x1d8/0x4e0
worker_thread+0x154/0x420
kthread+0x108/0x150
ret_from_fork+0x10/0x18
Fixes: 01584a5edc ("RDMA/hns: Add support of direct wqe")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20241220055249.146943-5-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8673a6c2d9e483dfeeef83a1f06f59e05636f4d1 ]
Due to HW limitation, the three region of WQE buffer must be mapped
and set to HW in a fixed order: SQ buffer, SGE buffer, and RQ buffer.
Currently when one region is zero-hop while the other two are not,
the zero-hop region will not be mapped. This violate the limitation
above and leads to address error.
Fixes: 38389eaa4d ("RDMA/hns: Add mtr support for mixed multihop addressing")
Signed-off-by: wenglianfa <wenglianfa@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20241220055249.146943-2-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a4ca341080758d847db155b97887bff6f84016a4 ]
hns_roce_mtr_find() is a collection of multiple functions, and the
return value is also difficult to understand, which is not conducive
to modification and maintenance.
Separate the function of obtaining MTR root BA from this function.
And some adjustments has been made to improve readability.
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20240113085935.2838701-2-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Stable-dep-of: 8673a6c2d9e4 ("RDMA/hns: Fix mapping error of zero-hop WQE buffer")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb9869043438af5b94230f94fb4c39206525d758 ]
The aging count is not a simple 20-bit value but comprises a 3-bit
multiplier and a 20-bit second time. The code tries to use the
original multiplier which is 4 as the second count is still 300 seconds
by default.
As the 20-bit number is now too large for practical use there is an option
to interpret it as microseconds instead of seconds.
Fixes: 2c119d9982 ("net: dsa: microchip: add the support for set_ageing_time")
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241218020224.70590-3-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 262bfba8ab820641c8cfbbf03b86d6c00242c078 ]
The aging count is not a simple 11-bit value but comprises a 3-bit
multiplier and an 8-bit second count. The code tries to use the
original multiplier which is 4 as the second count is still 300 seconds
by default.
Fixes: 2c119d9982 ("net: dsa: microchip: add the support for set_ageing_time")
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241218020224.70590-2-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 902806baf3c1e8383c1fe3ff0b6042b8cb5c2707 ]
AUDIO_UPDATE bit (Bit 5 of MAIN register 0x4A) needs to be set to 1
while updating Audio InfoFrame information and then set to 0 when done.
Otherwise partially updated Audio InfoFrames could be sent out. Two
cases where this rule were not followed are fixed:
- In adv7511_hdmi_hw_params() make sure AUDIO_UPDATE bit is updated
before/after setting ADV7511_REG_AUDIO_INFOFRAME.
- In audio_startup() use the correct register for clearing
AUDIO_UPDATE bit.
The problem with corrupted audio infoframes were discovered by letting
a HDMI logic analyser check the output of ADV7535.
Note that this patchs replaces writing REG_GC(1) with
REG_INFOFRAME_UPDATE. Bit 5 of REG_GC(1) is positioned within field
GC_PP[3:0] and that field doesn't control audio infoframe and is read-
only. My conclusion therefore was that the author if this code meant to
clear bit 5 of REG_INFOFRAME_UPDATE from the very beginning.
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Fixes: 53c515befe ("drm/bridge: adv7511: Add Audio support")
Signed-off-by: Stefan Ekenberg <stefan.ekenberg@axis.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241119-adv7511-audio-info-frame-v4-1-4ae68e76c89c@axis.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9272cba0ded71b5a2084da3004ec7806b8cb7fd2 ]
QP table handling is synchronized with destroy QP and Async
event from the HW. The same needs to be synchronized
during create_qp also. Use the same lock in create_qp also.
Fixes: 76d3ddff7153 ("RDMA/bnxt_re: synchronize the qp-handle table array")
Fixes: f218d67ef0 ("RDMA/bnxt_re: Allow posting when QPs are in error")
Fixes: 84cf229f40 ("RDMA/bnxt_re: Fix the qp table indexing")
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/20241217102649.1377704-6-kalesh-anakkur.purayil@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 40be32303ec829ea12f9883e499bfd3fe9e52baf ]
While creating qps, driver adds one extra entry to the sq size
passed by the ULPs in order to avoid queue full condition.
When ULPs creates QPs with max_qp_wr reported, driver creates
QP with 1 more than the max_wqes supported by HW. Create QP fails
in this case. To avoid this error, reduce 1 entry in max_qp_wqes
and report it to the stack.
Fixes: 1ac5a40479 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/20241217102649.1377704-2-kalesh-anakkur.purayil@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ce1219c3f76bb131d095e90521506d3c6ccfa086 ]
Currently, we don't use the return value from sock_queue_rcv_skb, which
means we may leak skbs if a message is not successfully queued to a
socket.
Instead, ensure that we're freeing the skb where the sock hasn't
otherwise taken ownership of the skb by adding checks on the
sock_queue_rcv_skb() to invoke a kfree on failure.
In doing so, rather than using the 'rc' value to trigger the
kfree_skb(), use the skb pointer itself, which is more explicit.
Also, add a kunit test for the sock delivery failure cases.
Fixes: 4a992bbd36 ("mctp: Implement message fragmentation & reassembly")
Cc: stable@vger.kernel.org
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/20241218-mctp-next-v2-1-1c1729645eaa@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e21ebe51af688eb98fd6269240212a3c7300deea ]
xHC hosts from several vendors have the same issue where endpoints start
so slowly that a later queued 'Stop Endpoint' command may complete before
endpoint is up and running.
The 'Stop Endpoint' command fails with context state error as the endpoint
still appears as stopped.
See commit 42b758137601 ("usb: xhci: Limit Stop Endpoint retries") for
details
CC: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20241217102122.2316814-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 42b7581376015c1bbcbe5831f043cd0ac119d028 ]
Some host controllers fail to atomically transition an endpoint to the
Running state on a doorbell ring and enter a hidden "Restarting" state,
which looks very much like Stopped, with the important difference that
it will spontaneously transition to Running anytime soon.
A Stop Endpoint command queued in the Restarting state typically fails
with Context State Error and the completion handler sees the Endpoint
Context State as either still Stopped or already Running. Even a case
of Halted was observed, when an error occurred right after the restart.
The Halted state is already recovered from by resetting the endpoint.
The Running state is handled by retrying Stop Endpoint.
The Stopped state was recognized as a problem on NEC controllers and
worked around also by retrying, because the endpoint soon restarts and
then stops for good. But there is a risk: the command may fail if the
endpoint is "stopped for good" already, and retries will fail forever.
The possibility of this was not realized at the time, but a number of
cases were discovered later and reproduced. Some proved difficult to
deal with, and it is outright impossible to predict if an endpoint may
fail to ever start at all due to a hardware bug. One such bug (albeit
on ASM3142, not on NEC) was found to be reliably triggered simply by
toggling an AX88179 NIC up/down in a tight loop for a few seconds.
An endless retries storm is quite nasty. Besides putting needless load
on the xHC and CPU, it causes URBs never to be given back, paralyzing
the device and connection/disconnection logic for the whole bus if the
device is unplugged. User processes waiting for URBs become unkillable,
drivers and kworker threads lock up and xhci_hcd cannot be reloaded.
For peace of mind, impose a timeout on Stop Endpoint retries in this
case. If they don't succeed in 100ms, consider the endpoint stopped
permanently for some reason and just give back the unlinked URBs. This
failure case is rare already and work is under way to make it rarer.
Start this work today by also handling one simple case of race with
Reset Endpoint, because it costs just two lines to implement.
Fixes: fd9d55d190c0 ("xhci: retry Stop Endpoint on buggy NEC controllers")
CC: stable@vger.kernel.org
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20241106101459.775897-32-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: e21ebe51af68 ("xhci: Turn NEC specific quirk for handling Stop Endpoint errors generic")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd9d55d190c0e5fefd3a9165ea361809427885a1 ]
Two NEC uPD720200 adapters have been observed to randomly misbehave:
a Stop Endpoint command fails with Context Error, the Output Context
indicates Stopped state, and the endpoint keeps running. Very often,
Set TR Dequeue Pointer is seen to fail next with Context Error too,
in addition to problems from unexpectedly completed cancelled work.
The pathology is common on fast running isoc endpoints like uvcvideo,
but has also been reproduced on a full-speed bulk endpoint of pl2303.
It seems all EPs are affected, with risk proportional to their load.
Reproduction involves receiving any kind of stream and closing it to
make the device driver cancel URBs already queued in advance.
Deal with it by retrying the command like in the Running state.
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240229141438.619372-8-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: e21ebe51af68 ("xhci: Turn NEC specific quirk for handling Stop Endpoint errors generic")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8644b48714dca8bf2f42a4ff8311de8efc9bd8c3 ]
Intel Panther Lake-M/P has the same integrated Thunderbolt/USB4
controller as Lunar Lake. Add these PCI IDs to the driver list of
supported devices.
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2cd3da4e37453019e21a486d9de3144f46b4fdf7 ]
Intel Lunar Lake has similar integrated Thunderbolt/USB4 controller as
Intel Meteor Lake with some small differences in the host router (it has
3 DP IN adapters for instance). Add the Intel Lunar Lake PCI IDs to the
driver list of supported devices.
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Stable-dep-of: 8644b48714dc ("thunderbolt: Add support for Intel Panther Lake-M/P")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit afc6717628f959941d7b33728570568b4af1c4b8 upstream.
In order to catch a common bug where a TRACE_EVENT() TP_fast_assign()
assigns an address of an allocated string to the ring buffer and then
references it in TP_printk(), which can be executed hours later when the
string is free, the function test_event_printk() runs on all events as
they are registered to make sure there's no unwanted dereferencing.
It calls process_string() to handle cases in TP_printk() format that has
"%s". It returns whether or not the string is safe. But it can have some
false positives.
For instance, xe_bo_move() has:
TP_printk("move_lacks_source:%s, migrate object %p [size %zu] from %s to %s device_id:%s",
__entry->move_lacks_source ? "yes" : "no", __entry->bo, __entry->size,
xe_mem_type_to_name[__entry->old_placement],
xe_mem_type_to_name[__entry->new_placement], __get_str(device_id))
Where the "%s" references into xe_mem_type_to_name[]. This is an array of
pointers that should be safe for the event to access. Instead of flagging
this as a bad reference, if a reference points to an array, where the
record field is the index, consider it safe.
Link: https://lore.kernel.org/all/9dee19b6185d325d0e6fa5f7cbba81d007d99166.camel@sapience.com/
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20241231000646.324fb5f7@gandalf.local.home
Fixes: 65a25d9f7ac02 ("tracing: Add "%s" check in test_event_printk()")
Reported-by: Genes Lists <lists@sapience.com>
Tested-by: Gene C <arch@sapience.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 05b36b04d74a517d6675bf2f90829ff1ac7e28dc upstream.
Shinichiro reported the following use-after free that sometimes is
happening in our CI system when running fstests' btrfs/284 on a TCMU
runner device:
BUG: KASAN: slab-use-after-free in lock_release+0x708/0x780
Read of size 8 at addr ffff888106a83f18 by task kworker/u80:6/219
CPU: 8 UID: 0 PID: 219 Comm: kworker/u80:6 Not tainted 6.12.0-rc6-kts+ #15
Hardware name: Supermicro Super Server/X11SPi-TF, BIOS 3.3 02/21/2020
Workqueue: btrfs-endio btrfs_end_bio_work [btrfs]
Call Trace:
<TASK>
dump_stack_lvl+0x6e/0xa0
? lock_release+0x708/0x780
print_report+0x174/0x505
? lock_release+0x708/0x780
? __virt_addr_valid+0x224/0x410
? lock_release+0x708/0x780
kasan_report+0xda/0x1b0
? lock_release+0x708/0x780
? __wake_up+0x44/0x60
lock_release+0x708/0x780
? __pfx_lock_release+0x10/0x10
? __pfx_do_raw_spin_lock+0x10/0x10
? lock_is_held_type+0x9a/0x110
_raw_spin_unlock_irqrestore+0x1f/0x60
__wake_up+0x44/0x60
btrfs_encoded_read_endio+0x14b/0x190 [btrfs]
btrfs_check_read_bio+0x8d9/0x1360 [btrfs]
? lock_release+0x1b0/0x780
? trace_lock_acquire+0x12f/0x1a0
? __pfx_btrfs_check_read_bio+0x10/0x10 [btrfs]
? process_one_work+0x7e3/0x1460
? lock_acquire+0x31/0xc0
? process_one_work+0x7e3/0x1460
process_one_work+0x85c/0x1460
? __pfx_process_one_work+0x10/0x10
? assign_work+0x16c/0x240
worker_thread+0x5e6/0xfc0
? __pfx_worker_thread+0x10/0x10
kthread+0x2c3/0x3a0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x31/0x70
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Allocated by task 3661:
kasan_save_stack+0x30/0x50
kasan_save_track+0x14/0x30
__kasan_kmalloc+0xaa/0xb0
btrfs_encoded_read_regular_fill_pages+0x16c/0x6d0 [btrfs]
send_extent_data+0xf0f/0x24a0 [btrfs]
process_extent+0x48a/0x1830 [btrfs]
changed_cb+0x178b/0x2ea0 [btrfs]
btrfs_ioctl_send+0x3bf9/0x5c20 [btrfs]
_btrfs_ioctl_send+0x117/0x330 [btrfs]
btrfs_ioctl+0x184a/0x60a0 [btrfs]
__x64_sys_ioctl+0x12e/0x1a0
do_syscall_64+0x95/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Freed by task 3661:
kasan_save_stack+0x30/0x50
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x70
__kasan_slab_free+0x4f/0x70
kfree+0x143/0x490
btrfs_encoded_read_regular_fill_pages+0x531/0x6d0 [btrfs]
send_extent_data+0xf0f/0x24a0 [btrfs]
process_extent+0x48a/0x1830 [btrfs]
changed_cb+0x178b/0x2ea0 [btrfs]
btrfs_ioctl_send+0x3bf9/0x5c20 [btrfs]
_btrfs_ioctl_send+0x117/0x330 [btrfs]
btrfs_ioctl+0x184a/0x60a0 [btrfs]
__x64_sys_ioctl+0x12e/0x1a0
do_syscall_64+0x95/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The buggy address belongs to the object at ffff888106a83f00
which belongs to the cache kmalloc-rnd-07-96 of size 96
The buggy address is located 24 bytes inside of
freed 96-byte region [ffff888106a83f00, ffff888106a83f60)
The buggy address belongs to the physical page:
page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888106a83800 pfn:0x106a83
flags: 0x17ffffc0000000(node=0|zone=2|lastcpupid=0x1fffff)
page_type: f5(slab)
raw: 0017ffffc0000000 ffff888100053680 ffffea0004917200 0000000000000004
raw: ffff888106a83800 0000000080200019 00000001f5000000 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888106a83e00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
ffff888106a83e80: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
>ffff888106a83f00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
^
ffff888106a83f80: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
ffff888106a84000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================
Further analyzing the trace and the crash dump's vmcore file shows that
the wake_up() call in btrfs_encoded_read_endio() is calling wake_up() on
the wait_queue that is in the private data passed to the end_io handler.
Commit 4ff47df40447 ("btrfs: move priv off stack in
btrfs_encoded_read_regular_fill_pages()") moved 'struct
btrfs_encoded_read_private' off the stack.
Before that commit one can see a corruption of the private data when
analyzing the vmcore after a crash:
*(struct btrfs_encoded_read_private *)0xffff88815626eec8 = {
.wait = (wait_queue_head_t){
.lock = (spinlock_t){
.rlock = (struct raw_spinlock){
.raw_lock = (arch_spinlock_t){
.val = (atomic_t){
.counter = (int)-2005885696,
},
.locked = (u8)0,
.pending = (u8)157,
.locked_pending = (u16)40192,
.tail = (u16)34928,
},
.magic = (unsigned int)536325682,
.owner_cpu = (unsigned int)29,
.owner = (void *)__SCT__tp_func_btrfs_transaction_commit+0x0 = 0x0,
.dep_map = (struct lockdep_map){
.key = (struct lock_class_key *)0xffff8881575a3b6c,
.class_cache = (struct lock_class *[2]){ 0xffff8882a71985c0, 0xffffea00066f5d40 },
.name = (const char *)0xffff88815626f100 = "",
.wait_type_outer = (u8)37,
.wait_type_inner = (u8)178,
.lock_type = (u8)154,
},
},
.__padding = (u8 [24]){ 0, 157, 112, 136, 50, 174, 247, 31, 29 },
.dep_map = (struct lockdep_map){
.key = (struct lock_class_key *)0xffff8881575a3b6c,
.class_cache = (struct lock_class *[2]){ 0xffff8882a71985c0, 0xffffea00066f5d40 },
.name = (const char *)0xffff88815626f100 = "",
.wait_type_outer = (u8)37,
.wait_type_inner = (u8)178,
.lock_type = (u8)154,
},
},
.head = (struct list_head){
.next = (struct list_head *)0x112cca,
.prev = (struct list_head *)0x47,
},
},
.pending = (atomic_t){
.counter = (int)-1491499288,
},
.status = (blk_status_t)130,
}
Here we can see several indicators of in-memory data corruption, e.g. the
large negative atomic values of ->pending or
->wait->lock->rlock->raw_lock->val, as well as the bogus spinlock magic
0x1ff7ae32 (decimal 536325682 above) instead of 0xdead4ead or the bogus
pointer values for ->wait->head.
To fix this, change atomic_dec_return() to atomic_dec_and_test() to fix the
corruption, as atomic_dec_return() is defined as two instructions on
x86_64, whereas atomic_dec_and_test() is defined as a single atomic
operation. This can lead to a situation where counter value is already
decremented but the if statement in btrfs_encoded_read_endio() is not
completely processed, i.e. the 0 test has not completed. If another thread
continues executing btrfs_encoded_read_regular_fill_pages() the
atomic_dec_return() there can see an already updated ->pending counter and
continues by freeing the private data. Continuing in the endio handler the
test for 0 succeeds and the wait_queue is woken up, resulting in a
use-after-free.
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Suggested-by: Damien Le Moal <Damien.LeMoal@wdc.com>
Fixes: 1881fba89b ("btrfs: add BTRFS_IOC_ENCODED_READ ioctl")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Alva Lan <alvalan9@foxmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 900f83cf376bdaf798b6f5dcb2eae0c822e908b6 upstream.
When evaluating extended permissions, ignore unknown permissions instead
of calling BUG(). This commit ensures that future permissions can be
added without interfering with older kernels.
Cc: stable@vger.kernel.org
Fixes: fa1aa143ac ("selinux: extended permissions for ioctls")
Signed-off-by: Thiébaud Weksteen <tweek@google.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bcc80dec91ee745b3d66f3e48f0ec2efdea97149 upstream.
read_hv_sched_clock_tsc() assumes that the Hyper-V clock counter is
bigger than the variable hv_sched_clock_offset, which is cached during
early boot, but depending on the timing this assumption may be false
when a hibernated VM starts again (the clock counter starts from 0
again) and is resuming back (Note: hv_init_tsc_clocksource() is not
called during hibernation/resume); consequently,
read_hv_sched_clock_tsc() may return a negative integer (which is
interpreted as a huge positive integer since the return type is u64)
and new kernel messages are prefixed with huge timestamps before
read_hv_sched_clock_tsc() grows big enough (which typically takes
several seconds).
Fix the issue by saving the Hyper-V clock counter just before the
suspend, and using it to correct the hv_sched_clock_offset in
resume. This makes hv tsc page based sched_clock continuous and ensures
that post resume, it starts from where it left off during suspend.
Override x86_platform.save_sched_clock_state and
x86_platform.restore_sched_clock_state routines to correct this as soon
as possible.
Note: if Invariant TSC is available, the issue doesn't happen because
1) we don't register read_hv_sched_clock_tsc() for sched clock:
See commit e5313f1c54 ("clocksource/drivers/hyper-v: Rework
clocksource and sched clock setup");
2) the common x86 code adjusts TSC similarly: see
__restore_processor_state() -> tsc_verify_tsc_adjust(true) and
x86_platform.restore_sched_clock_state().
Cc: stable@vger.kernel.org
Fixes: 1349401ff1 ("clocksource/drivers/hyper-v: Suspend/resume Hyper-V clocksource for hibernation")
Co-developed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Naman Jain <namjain@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20240917053917.76787-1-namjain@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240917053917.76787-1-namjain@linux.microsoft.com>
Signed-off-by: Naman Jain <namjain@linux.microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d5ff2fb2e7167e9483846e34148e60c0c016a1f6 upstream.
In the normal case, when we excute `echo 0 > /proc/fs/nfsd/threads`, the
function `nfs4_state_destroy_net` in `nfs4_state_shutdown_net` will
release all resources related to the hashed `nfs4_client`. If the
`nfsd_client_shrinker` is running concurrently, the `expire_client`
function will first unhash this client and then destroy it. This can
lead to the following warning. Additionally, numerous use-after-free
errors may occur as well.
nfsd_client_shrinker echo 0 > /proc/fs/nfsd/threads
expire_client nfsd_shutdown_net
unhash_client ...
nfs4_state_shutdown_net
/* won't wait shrinker exit */
/* cancel_work(&nn->nfsd_shrinker_work)
* nfsd_file for this /* won't destroy unhashed client1 */
* client1 still alive nfs4_state_destroy_net
*/
nfsd_file_cache_shutdown
/* trigger warning */
kmem_cache_destroy(nfsd_file_slab)
kmem_cache_destroy(nfsd_file_mark_slab)
/* release nfsd_file and mark */
__destroy_client
====================================================================
BUG nfsd_file (Not tainted): Objects remaining in nfsd_file on
__kmem_cache_shutdown()
--------------------------------------------------------------------
CPU: 4 UID: 0 PID: 764 Comm: sh Not tainted 6.12.0-rc3+ #1
dump_stack_lvl+0x53/0x70
slab_err+0xb0/0xf0
__kmem_cache_shutdown+0x15c/0x310
kmem_cache_destroy+0x66/0x160
nfsd_file_cache_shutdown+0xac/0x210 [nfsd]
nfsd_destroy_serv+0x251/0x2a0 [nfsd]
nfsd_svc+0x125/0x1e0 [nfsd]
write_threads+0x16a/0x2a0 [nfsd]
nfsctl_transaction_write+0x74/0xa0 [nfsd]
vfs_write+0x1a5/0x6d0
ksys_write+0xc1/0x160
do_syscall_64+0x5f/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
====================================================================
BUG nfsd_file_mark (Tainted: G B W ): Objects remaining
nfsd_file_mark on __kmem_cache_shutdown()
--------------------------------------------------------------------
dump_stack_lvl+0x53/0x70
slab_err+0xb0/0xf0
__kmem_cache_shutdown+0x15c/0x310
kmem_cache_destroy+0x66/0x160
nfsd_file_cache_shutdown+0xc8/0x210 [nfsd]
nfsd_destroy_serv+0x251/0x2a0 [nfsd]
nfsd_svc+0x125/0x1e0 [nfsd]
write_threads+0x16a/0x2a0 [nfsd]
nfsctl_transaction_write+0x74/0xa0 [nfsd]
vfs_write+0x1a5/0x6d0
ksys_write+0xc1/0x160
do_syscall_64+0x5f/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
To resolve this issue, cancel `nfsd_shrinker_work` using synchronous
mode in nfs4_state_shutdown_net.
Fixes: 7c24fa2250 ("NFSD: replace delayed_work with work_struct for nfsd_client_shrinker")
Signed-off-by: Yang Erkun <yangerkun@huaweicloud.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fca432e73db2bec0fdbfbf6d98d3ebcd5388a977 upstream.
The following sysfs entries are reading super block member directly,
which can have a different endian and cause wrong values:
- sys/fs/btrfs/<uuid>/nodesize
- sys/fs/btrfs/<uuid>/sectorsize
- sys/fs/btrfs/<uuid>/clone_alignment
Thankfully those values (nodesize and sectorsize) are always aligned
inside the btrfs_super_block, so it won't trigger unaligned read errors,
just endian problems.
Fix them by using the native cached members instead.
Fixes: df93589a17 ("btrfs: export more from FS_INFO to sysfs")
CC: stable@vger.kernel.org
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2c8507c63f5498d4ee4af404a8e44ceae4345056 upstream.
During swap activation we iterate over the extents of a file and we can
have many thousands of them, so we can end up in a busy loop monopolizing
a core. Avoid this by doing a voluntary reschedule after processing each
extent.
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 49e1f0fd0d4cb03a16b8526c4e683e1958f71490 upstream.
Running i2c-detect currently produces an output akin to:
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: 08 -- 0a -- 0c -- 0e --
10: 10 -- 12 -- 14 -- 16 -- UU 19 -- 1b -- 1d -- 1f
20: -- 21 -- 23 -- 25 -- 27 -- 29 -- 2b -- 2d -- 2f
30: -- -- -- -- -- -- -- -- 38 -- 3a -- 3c -- 3e --
40: 40 -- 42 -- 44 -- 46 -- 48 -- 4a -- 4c -- 4e --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: 60 -- 62 -- 64 -- 66 -- 68 -- 6a -- 6c -- 6e --
70: 70 -- 72 -- 74 -- 76 --
This happens because for an i2c_msg with a len of 0 the driver will
mark the transmission of the message as a success once the START has
been sent, without waiting for the devices on the bus to respond with an
ACK/NAK. Since i2cdetect seems to run in a tight loop over all addresses
the NAK is treated as part of the next test for the next address.
Delete the fast path that marks a message as complete when idev->msg_len
is zero after sending a START/RESTART since this isn't a valid scenario.
CC: stable@vger.kernel.org
Fixes: 64a6f1c498 ("i2c: add support for microchip fpga i2c controllers")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20241218-outbid-encounter-b2e78b1cc707@spud
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e0cec363197e41af870613e8e17b30bf0e3d41b5 upstream.
Compatible string "fsl,imx7d-i2c" is not exited at i2c-imx driver
compatible string table, at the result, "fsl,imx21-i2c" will be
matched, but it will cause erratum ERR007805 not be applied in fact.
So Add "fsl,imx7d-i2c" compatible string in i2c-imx driver to apply
the erratum ERR007805(https://www.nxp.com/docs/en/errata/IMX7DS_3N09P.pdf).
"
ERR007805 I2C: When the I2C clock speed is configured for 400 kHz,
the SCL low period violates the I2C spec of 1.3 uS min
Description: When the I2C module is programmed to operate at the
maximum clock speed of 400 kHz (as defined by the I2C spec), the SCL
clock low period violates the I2C spec of 1.3 uS min. The user must
reduce the clock speed to obtain the SCL low time to meet the 1.3us
I2C minimum required. This behavior means the SoC is not compliant
to the I2C spec at 400kHz.
Workaround: To meet the clock low period requirement in fast speed
mode, SCL must be configured to 384KHz or less.
"
"fsl,imx7d-i2c" already is documented in binding doc. This erratum
fix has been included in imx6_i2c_hwdata and it is the same in all
I.MX6/7/8, so just reuse it.
Fixes: 39c025721d ("i2c: imx: Implement errata ERR007805 or e7805 bus frequency limit")
Cc: stable@vger.kernel.org # v5.18+
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Fixes: 39c025721d ("i2c: imx: Implement errata ERR007805 or e7805 bus frequency limit")
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20241218044238.143414-1-carlos.song@nxp.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9a8f9320d67b27ddd7f1ee88d91820197a0e908f upstream.
At present, where repeated sends are intended to be used, the
i2c-microchip-core driver sends a stop followed by a start. Lots of i2c
devices must not malfunction in the face of this behaviour, because the
driver has operated like this for years! Try to keep track of whether or
not a repeated send is required, and suppress sending a stop in these
cases.
CC: stable@vger.kernel.org
Fixes: 64a6f1c498 ("i2c: add support for microchip fpga i2c controllers")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20241218-football-composure-e56df2461461@spud
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e33ac68e5e21ec1292490dfe061e75c0dbdd3bd4 upstream.
BUG: KASAN: slab-use-after-free in __lock_acquire+0x370b/0x4a10 kernel/locking/lockdep.c:5089
Call Trace:
<TASK>
...
_raw_spin_lock_irqsave+0x3d/0x60 kernel/locking/spinlock.c:162
class_raw_spinlock_irqsave_constructor include/linux/spinlock.h:551 [inline]
try_to_wake_up+0xb5/0x23c0 kernel/sched/core.c:4205
io_sq_thread_park+0xac/0xe0 io_uring/sqpoll.c:55
io_sq_thread_finish+0x6b/0x310 io_uring/sqpoll.c:96
io_sq_offload_create+0x162/0x11d0 io_uring/sqpoll.c:497
io_uring_create io_uring/io_uring.c:3724 [inline]
io_uring_setup+0x1728/0x3230 io_uring/io_uring.c:3806
...
Kun Hu reports that the SQPOLL creating error path has UAF, which
happens if io_uring_alloc_task_context() fails and then io_sq_thread()
manages to run and complete before the rest of error handling code,
which means io_sq_thread_finish() is looking at already killed task.
Note that this is mostly theoretical, requiring fault injection on
the allocation side to trigger in practice.
Cc: stable@vger.kernel.org
Reported-by: Kun Hu <huk23@m.fudan.edu.cn>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/0f2f1aa5729332612bd01fe0f2f385fd1f06ce7c.1735231717.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f718faf3940e95d5d34af9041f279f598396ab7d ]
Before commit:
f5d39b0208 ("freezer,sched: Rewrite core freezer logic")
the frozen task stat was reported as 'D' in cgroup v1.
However, after rewriting the core freezer logic, the frozen task stat is
reported as 'R'. This is confusing, especially when a task with stat of
'S' is frozen.
This bug can be reproduced with these steps:
$ cd /sys/fs/cgroup/freezer/
$ mkdir test
$ sleep 1000 &
[1] 739 // task whose stat is 'S'
$ echo 739 > test/cgroup.procs
$ echo FROZEN > test/freezer.state
$ ps -aux | grep 739
root 739 0.1 0.0 8376 1812 pts/0 R 10:56 0:00 sleep 1000
As shown above, a task whose stat is 'S' was changed to 'R' when it was
frozen.
To solve this regression, simply maintain the same reported state as
before the rewrite.
[ mingo: Enhanced the changelog and comments ]
Fixes: f5d39b0208 ("freezer,sched: Rewrite core freezer logic")
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Michal Koutný <mkoutny@suse.com>
Link: https://lore.kernel.org/r/20241217004818.3200515-1-chenridong@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0d6b35283b ]
task_state_index() ignores uninteresting state flags (such as
TASK_FREEZABLE) for most states, but for TASK_IDLE and TASK_RTLOCK_WAIT
it does not.
So if a task is waiting TASK_IDLE|TASK_FREEZABLE it gets incorrectly
reported as TASK_UNINTERRUPTIBLE or "D". (it is planned for nfsd to
change to use this state).
Fix this by only testing the interesting bits and not the irrelevant
bits in __task_state_index()
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/169335025927.5133.4781141800413736103@noble.neil.brown.name
Stable-dep-of: f718faf3940e ("freezer, sched: Report frozen tasks as 'D' instead of 'R'")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 8421d4c8762bd022cb491f2f0f7019ef51b4f0a7 upstream.
If a newly-added link type doesn't invoke BPF_LINK_TYPE(), accessing
bpf_link_type_strs[link->type] may result in an out-of-bounds access.
To spot such missed invocations early in the future, checking the
validity of link->type in bpf_link_show_fdinfo() and emitting a warning
when such invocations are missed.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241024013558.1135167-3-houtao@huaweicloud.com
[ shung-hsi.yu: break up existing seq_printf() call since commit 68b04864ca
("bpf: Create links for BPF struct_ops maps.") is not present ]
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
