commit 1e6a4eba69 upstream.
The imx SC api strongly assumes that messages are composed out of
4-bytes words but some of our message structs have odd sizeofs.
This produces many oopses with CONFIG_KASAN=y:
BUG: KASAN: stack-out-of-bounds in imx_mu_send_data+0x108/0x1f0
It shouldn't cause an issues in normal use because these structs are
always allocated on the stack.
Fixes: 15e1f2bc8b ("firmware: imx: add misc svc support")
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 26c4b4758f upstream.
There is only on Ethernet port and one Ethernet PHY on imx8qxp-mek.
Remove the unexisting ethphy1 port.
This fixes a run-time warning:
mdio_bus 5b040000.ethernet-1: MDIO device at address 1 is missing.
Fixes: fdea904e85 ("arm64: dts: imx: add imx8qxp mek support")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eb0bbba763 upstream.
Currently the vmmc is supplied by the 1.8V pmic rail but this is wrong.
The default module behaviour is to power VCCQ and VCC by the 3.3V power
rail. Optional the user can connect the VCCQ to the pmic 1.8V emmc
power rail using a solder jumper.
Fixes: ddec5d1c00 ("ARM: dts: imx6: Add initial support for phyCORE-i.MX 6 SOM")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 46b7edf1c7 upstream.
I've noticed that when writing data to the modem the writes can time out
at some point eventually. Looks like kicking the modem idle GPIO every
600 ms instead of once a second fixes the issue. Note that this rate is
different from our runtime PM autosuspend rate MDM6600_MODEM_IDLE_DELAY_MS
that we still want to keep at 1 second, so let's add a separate define for
PHY_MDM6600_IDLE_KICK_MS.
Fixes: f7f50b2a7b ("phy: mapphone-mdm6600: Add runtime PM support for n_gsm on USB suspend")
Cc: Marcel Partap <mpartap@gmx.net>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Michael Scott <hashcode0f@gmail.com>
Cc: NeKit <nekit1000@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit be4e3c737e upstream.
We have an interrupt handler for the wake-up GPIO pin, but we're missing
the code to wake-up the system. This can cause timeouts receiving data
for the UART that shares the wake-up GPIO pin with the USB PHY.
All we need to do is just wake the system and kick the autosuspend
timeout to fix the issue.
Fixes: 5d1ebbda03 ("phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4")
Cc: Marcel Partap <mpartap@gmx.net>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Michael Scott <hashcode0f@gmail.com>
Cc: NeKit <nekit1000@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8e093ea4d3 upstream.
The QSPI controller memory space is limited to 128MB:
0x9000_00000-0x9800_00000/0XD000_0000--0XD800_0000.
There are nor flashes that are bigger in size than the memory size
supported by the controller: Micron MT25QL02G (256 MB).
Check if the address exceeds the MMIO window size. An improvement
would be to add support for regular SPI mode and fall back to it
when the flash memories overrun the controller's memory space.
Fixes: 0e6aae08e9 ("spi: Add QuadSPI driver for Atmel SAMA5D2")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20200228155437.1558219-1-tudor.ambarus@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9b3193089e upstream.
commit c2caa4da46 ("ASoC: Fix widget powerdown on shutdown") added a
set of the power state during snd_soc_dapm_shutdown to ensure the
widgets powered off. However, when commit 39eb5fd13d
("ASoC: dapm: Delay w->power update until the changes are written")
added the new_power member of the widget structure, to differentiate
between the current power state and the target power state, it did not
update the shutdown to use the new_power member.
As new_power has not updated it will be left in the state set by the
last DAPM sequence, ie. 1 for active widgets. So as the DAPM sequence
for the shutdown proceeds it will turn the widgets on (despite them
already being on) rather than turning them off.
Fixes: 39eb5fd13d ("ASoC: dapm: Delay w->power update until the changes are written")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200228153145.21013-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6c89ffea60 upstream.
dpcm_show_state() invokes multiple snprintf() calls to concatenate
formatted strings on the fixed size buffer. The usage of snprintf()
is supposed for avoiding the buffer overflow, but it doesn't work as
expected because snprintf() doesn't return the actual output size but
the size to be written.
Fix this bug by replacing all snprintf() calls with scnprintf()
calls.
Fixes: f86dcef87b ("ASoC: dpcm: Add debugFS support for DPCM")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20200218111737.14193-4-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 59bee45b97 ]
Stefan reported a strange kernel fault which turned out to be due to a
missing KUAP disable in flush_coherent_icache() called from
flush_icache_range().
The fault looks like:
Kernel attempted to access user page (7fffc30d9c00) - exploit attempt? (uid: 1009)
BUG: Unable to handle kernel data access on read at 0x7fffc30d9c00
Faulting instruction address: 0xc00000000007232c
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV
CPU: 35 PID: 5886 Comm: sigtramp Not tainted 5.6.0-rc2-gcc-8.2.0-00003-gfc37a1632d40 #79
NIP: c00000000007232c LR: c00000000003b7fc CTR: 0000000000000000
REGS: c000001e11093940 TRAP: 0300 Not tainted (5.6.0-rc2-gcc-8.2.0-00003-gfc37a1632d40)
MSR: 900000000280b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 28000884 XER: 00000000
CFAR: c0000000000722fc DAR: 00007fffc30d9c00 DSISR: 08000000 IRQMASK: 0
GPR00: c00000000003b7fc c000001e11093bd0 c0000000023ac200 00007fffc30d9c00
GPR04: 00007fffc30d9c18 0000000000000000 c000001e11093bd4 0000000000000000
GPR08: 0000000000000000 0000000000000001 0000000000000000 c000001e1104ed80
GPR12: 0000000000000000 c000001fff6ab380 c0000000016be2d0 4000000000000000
GPR16: c000000000000000 bfffffffffffffff 0000000000000000 0000000000000000
GPR20: 00007fffc30d9c00 00007fffc30d8f58 00007fffc30d9c18 00007fffc30d9c20
GPR24: 00007fffc30d9c18 0000000000000000 c000001e11093d90 c000001e1104ed80
GPR28: c000001e11093e90 0000000000000000 c0000000023d9d18 00007fffc30d9c00
NIP flush_icache_range+0x5c/0x80
LR handle_rt_signal64+0x95c/0xc2c
Call Trace:
0xc000001e11093d90 (unreliable)
handle_rt_signal64+0x93c/0xc2c
do_notify_resume+0x310/0x430
ret_from_except_lite+0x70/0x74
Instruction dump:
409e002c 7c0802a6 3c62ff31 3863f6a0 f8010080 48195fed 60000000 48fe4c8d
60000000 e8010080 7c0803a6 7c0004ac <7c00ffac> 7c0004ac 4c00012c 38210070
This path through handle_rt_signal64() to setup_trampoline() and
flush_icache_range() is only triggered by 64-bit processes that have
unmapped their VDSO, which is rare.
flush_icache_range() takes a range of addresses to flush. In
flush_coherent_icache() we implement an optimisation for CPUs where we
know we don't actually have to flush the whole range, we just need to
do a single icbi.
However we still execute the icbi on the user address of the start of
the range we're flushing. On CPUs that also implement KUAP (Power9)
that leads to the spurious fault above.
We should be able to pass any address, including a kernel address, to
the icbi on these CPUs, which would avoid any interaction with KUAP.
But I don't want to make that change in a bug fix, just in case it
surfaces some strange behaviour on some CPU.
So for now just disable KUAP around the icbi. Note the icbi is treated
as a load, so we allow read access, not write as you'd expect.
Fixes: 890274c2dc ("powerpc/64s: Implement KUAP for Radix MMU")
Cc: stable@vger.kernel.org # v5.2+
Reported-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200303235708.26004-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 23eb7f560a ]
Similar to commit 22e9c88d48
("powerpc/64: reuse PPC32 static inline flush_dcache_range()")
this patch converts the following ASM symbols to C:
flush_icache_range()
__flush_dcache_icache()
__flush_dcache_icache_phys()
This was done as we discovered a long-standing bug where the length of the
range was truncated due to using a 32 bit shift instead of a 64 bit one.
By converting these functions to C, it becomes easier to maintain.
flush_dcache_icache_phys() retains a critical assembler section as we must
ensure there are no memory accesses while the data MMU is disabled
(authored by Christophe Leroy). Since this has no external callers, it has
also been made static, allowing the compiler to inline it within
flush_dcache_icache_page().
Signed-off-by: Alastair D'Silva <alastair@d-silva.org>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
[mpe: Minor fixups, don't export __flush_dcache_icache()]
Link: https://lore.kernel.org/r/20191104023305.9581-5-alastair@au1.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 549cd0ba04 upstream.
The debugfs output of intel skl driver writes strings with multiple
snprintf() calls with the fixed size. This was supposed to avoid the
buffer overflow but actually it still would, because snprintf()
returns the expected size to be output, not the actual output size.
Fix it by replacing snprintf() calls with scnprintf().
Fixes: d14700a01f ("ASoC: Intel: Skylake: Debugfs facility to dump module config")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20200218111737.14193-3-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 242c46c023 upstream.
In case of ABI version mismatch, _manifest needs to be freed as
it is just a copy of the original topology manifest. However, if
a driver manifest handler is defined, that would get executed and
the cleanup is never reached. Fix that by getting the return status
of manifest() instead of returning directly.
Fixes: 583958fa2e ("ASoC: topology: Make manifest backward compatible from ABI v4")
Signed-off-by: Dragos Tarcatu <dragos_tarcatu@mentor.com>
Link: https://lore.kernel.org/r/20200207185325.22320-3-dragos_tarcatu@mentor.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 51bddd4501 upstream.
The purpose of commit 0fd85869c2 ("spi/bcm63xx-hsspi: keep pll clk enabled")
was to keep the pll clk enabled through the lifetime of the device.
In order to do that, some 'clk_prepare_enable()'/'clk_disable_unprepare()'
calls have been added in the error handling path of the probe function, in
the remove function and in the suspend and resume functions.
However, a 'clk_disable_unprepare()' call has been unfortunately left in
the probe function. So the commit seems to be more or less a no-op.
Axe it now, so that the pll clk is left enabled through the lifetime of
the device, as described in the commit.
Fixes: 0fd85869c2 ("spi/bcm63xx-hsspi: keep pll clk enabled")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Jonas Gorski <jonas.gorski@gmail.com>
Link: https://lore.kernel.org/r/20200228213838.7124-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7155c44624 upstream.
The difference between "fsl,etsec2-mdio" and "gianfar" has to do with
the .get_tbipa function, which calculates the address of the TBIPA
register automatically, if not explicitly specified. [ see
drivers/net/ethernet/freescale/fsl_pq_mdio.c ]. On LS1021A, the TBIPA
register is at offset 0x30 within the port register block, which is what
the "gianfar" method of calculating addresses actually does.
Luckily, the bad "compatible" is inconsequential for ls1021a.dtsi,
because the TBIPA register is explicitly specified via the second "reg"
(<0x0 0x2d10030 0x0 0x4>), so the "get_tbipa" function is dead code.
Nonetheless it's good to restore it to its correct value.
Background discussion:
https://www.spinics.net/lists/stable/msg361156.html
Fixes: c7861adbe3 ("ARM: dts: ls1021: Fix SGMII PCS link remaining down after PHY disconnect")
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 974f51e863 upstream.
We neither assign congested_fn for requested-based blk-mq device nor
implement it correctly. So fix both.
Also, remove incorrect comment from dm_init_normal_md_queue and rename
it to dm_init_congested_fn.
Fixes: 4aa9c692e0 ("bdi: separate out congested state into a separate struct")
Cc: stable@vger.kernel.org
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ee63634bae upstream.
Dm-zoned initializes reference counters of new chunk works with zero
value and refcount_inc() is called to increment the counter. However, the
refcount_inc() function handles the addition to zero value as an error
and triggers the warning as follows:
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 7 PID: 1506 at lib/refcount.c:25 refcount_warn_saturate+0x68/0xf0
...
CPU: 7 PID: 1506 Comm: systemd-udevd Not tainted 5.4.0+ #134
...
Call Trace:
dmz_map+0x2d2/0x350 [dm_zoned]
__map_bio+0x42/0x1a0
__split_and_process_non_flush+0x14a/0x1b0
__split_and_process_bio+0x83/0x240
? kmem_cache_alloc+0x165/0x220
dm_process_bio+0x90/0x230
? generic_make_request_checks+0x2e7/0x680
dm_make_request+0x3e/0xb0
generic_make_request+0xcf/0x320
? memcg_drain_all_list_lrus+0x1c0/0x1c0
submit_bio+0x3c/0x160
? guard_bio_eod+0x2c/0x130
mpage_readpages+0x182/0x1d0
? bdev_evict_inode+0xf0/0xf0
read_pages+0x6b/0x1b0
__do_page_cache_readahead+0x1ba/0x1d0
force_page_cache_readahead+0x93/0x100
generic_file_read_iter+0x83a/0xe40
? __seccomp_filter+0x7b/0x670
new_sync_read+0x12a/0x1c0
vfs_read+0x9d/0x150
ksys_read+0x5f/0xe0
do_syscall_64+0x5b/0x180
entry_SYSCALL_64_after_hwframe+0x44/0xa9
...
After this warning, following refcount API calls for the counter all fail
to change the counter value.
Fix this by setting the initial reference counter value not zero but one
for the new chunk works. Instead, do not call refcount_inc() via
dmz_get_chunk_work() for the new chunks works.
The failure was observed with linux version 5.4 with CONFIG_REFCOUNT_FULL
enabled. Refcount rework was merged to linux version 5.5 by the
commit 168829ad09 ("Merge branch 'locking-core-for-linus' of
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip"). After this
commit, CONFIG_REFCOUNT_FULL was removed and the failure was observed
regardless of kernel configuration.
Linux version 4.20 merged the commit 092b564876 ("dm zoned: target: use
refcount_t for dm zoned reference counters"). Before this commit, dm
zoned used atomic_t APIs which does not check addition to zero, then this
fix is not necessary.
Fixes: 092b564876 ("dm zoned: target: use refcount_t for dm zoned reference counters")
Cc: stable@vger.kernel.org # 5.4+
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit adc0daad36 upstream.
The function dm_suspended returns true if the target is suspended.
However, when the target is being suspended during unload, it returns
false.
An example where this is a problem: the test "!dm_suspended(wc->ti)" in
writecache_writeback is not sufficient, because dm_suspended returns
zero while writecache_suspend is in progress. As is, without an
enhanced dm_suspended, simply switching from flush_workqueue to
drain_workqueue still emits warnings:
workqueue writecache-writeback: drain_workqueue() isn't complete after 10 tries
workqueue writecache-writeback: drain_workqueue() isn't complete after 100 tries
workqueue writecache-writeback: drain_workqueue() isn't complete after 200 tries
workqueue writecache-writeback: drain_workqueue() isn't complete after 300 tries
workqueue writecache-writeback: drain_workqueue() isn't complete after 400 tries
writecache_suspend calls flush_workqueue(wc->writeback_wq) - this function
flushes the current work. However, the workqueue may re-queue itself and
flush_workqueue doesn't wait for re-queued works to finish. Because of
this - the function writecache_writeback continues execution after the
device was suspended and then concurrently with writecache_dtr, causing
a crash in writecache_writeback.
We must use drain_workqueue - that waits until the work and all re-queued
works finish.
As a prereq for switching to drain_workqueue, this commit fixes
dm_suspended to return true after the presuspend hook and before the
postsuspend hook - just like during a normal suspend. It allows
simplifying the dm-integrity and dm-writecache targets so that they
don't have to maintain suspended flags on their own.
With this change use of drain_workqueue() can be used effectively. This
change was tested with the lvm2 testsuite and cryptsetup testsuite and
the are no regressions.
Fixes: 48debafe4f ("dm: add writecache target")
Cc: stable@vger.kernel.org # 4.18+
Reported-by: Corey Marthaler <cmarthal@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7cdf6a0aae upstream.
The crash can be reproduced by running the lvm2 testsuite test
lvconvert-thin-external-cache.sh for several minutes, e.g.:
while :; do make check T=shell/lvconvert-thin-external-cache.sh; done
The crash happens in this call chain:
do_waker -> policy_tick -> smq_tick -> end_hotspot_period -> clear_bitset
-> memset -> __memset -- which accesses an invalid pointer in the vmalloc
area.
The work entry on the workqueue is executed even after the bitmap was
freed. The problem is that cancel_delayed_work doesn't wait for the
running work item to finish, so the work item can continue running and
re-submitting itself even after cache_postsuspend. In order to make sure
that the work item won't be running, we must use cancel_delayed_work_sync.
Also, change flush_workqueue to drain_workqueue, so that if some work item
submits itself or another work item, we are properly waiting for both of
them.
Fixes: c6b4fcbad0 ("dm: add cache target")
Cc: stable@vger.kernel.org # v3.9
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7fc2e47f40 upstream.
If the flag SB_FLAG_RECALCULATE is present in the superblock, but it was
not specified on the command line (i.e. ic->recalculate_flag is false),
dm-integrity would return invalid table line - the reported number of
arguments would not match the real number.
Fixes: 468dfca38b ("dm integrity: add a bitmap mode")
Cc: stable@vger.kernel.org # v5.2+
Reported-by: Ondrej Kozina <okozina@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 53770f0ec5 upstream.
If we need to perform synchronous I/O in dm_integrity_map_continue(),
we must make sure that we are not in the map function - in order to
avoid the deadlock due to bio queuing in generic_make_request. To
avoid the deadlock, we offload the request to metadata_wq.
However, metadata_wq also processes metadata updates for write requests.
If there are too many requests that get offloaded to metadata_wq at the
beginning of dm_integrity_map_continue, the workqueue metadata_wq
becomes clogged and the system is incapable of processing any metadata
updates.
This causes a deadlock because all the requests that need to do metadata
updates wait for metadata_wq to proceed and metadata_wq waits inside
wait_and_add_new_range until some existing request releases its range
lock (which doesn't happen because the range lock is released after
metadata update).
In order to fix the deadlock, we create a new workqueue offload_wq and
offload requests to it - so that processing of offload_wq is independent
from processing of metadata_wq.
Fixes: 7eada909bf ("dm: add integrity target")
Cc: stable@vger.kernel.org # v4.12+
Reported-by: Heinz Mauelshagen <heinzm@redhat.com>
Tested-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d5bdf66108 upstream.
If we resume a device in bitmap mode and the on-disk format is in journal
mode, we must recalculate anything above ic->sb->recalc_sector. Otherwise,
there would be non-recalculated blocks which would cause I/O errors.
Fixes: 468dfca38b ("dm integrity: add a bitmap mode")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 94788af4ed upstream.
I was doing some experiments with I2C and noticed that Tegra APB DMA
driver crashes sometime after I2C DMA transfer termination. The crash
happens because tegra_dma_terminate_all() bails out immediately if pending
list is empty, and thus, it doesn't release the half-completed descriptors
which are getting re-used before ISR tasklet kicks-in.
tegra-i2c 7000c400.i2c: DMA transfer timeout
elants_i2c 0-0010: elants_i2c_irq: failed to read data: -110
------------[ cut here ]------------
WARNING: CPU: 0 PID: 142 at lib/list_debug.c:45 __list_del_entry_valid+0x45/0xac
list_del corruption, ddbaac44->next is LIST_POISON1 (00000100)
Modules linked in:
CPU: 0 PID: 142 Comm: kworker/0:2 Not tainted 5.5.0-rc2-next-20191220-00175-gc3605715758d-dirty #538
Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
Workqueue: events_freezable_power_ thermal_zone_device_check
[<c010e5c5>] (unwind_backtrace) from [<c010a1c5>] (show_stack+0x11/0x14)
[<c010a1c5>] (show_stack) from [<c0973925>] (dump_stack+0x85/0x94)
[<c0973925>] (dump_stack) from [<c011f529>] (__warn+0xc1/0xc4)
[<c011f529>] (__warn) from [<c011f7e9>] (warn_slowpath_fmt+0x61/0x78)
[<c011f7e9>] (warn_slowpath_fmt) from [<c042497d>] (__list_del_entry_valid+0x45/0xac)
[<c042497d>] (__list_del_entry_valid) from [<c047a87f>] (tegra_dma_tasklet+0x5b/0x154)
[<c047a87f>] (tegra_dma_tasklet) from [<c0124799>] (tasklet_action_common.constprop.0+0x41/0x7c)
[<c0124799>] (tasklet_action_common.constprop.0) from [<c01022ab>] (__do_softirq+0xd3/0x2a8)
[<c01022ab>] (__do_softirq) from [<c0124683>] (irq_exit+0x7b/0x98)
[<c0124683>] (irq_exit) from [<c0168c19>] (__handle_domain_irq+0x45/0x80)
[<c0168c19>] (__handle_domain_irq) from [<c043e429>] (gic_handle_irq+0x45/0x7c)
[<c043e429>] (gic_handle_irq) from [<c0101aa5>] (__irq_svc+0x65/0x94)
Exception stack(0xde2ebb90 to 0xde2ebbd8)
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200209163356.6439-2-digetx@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d288bddd83 upstream.
There is a DMA problem with the serial ports on i.MX6.
When the following sequence is performed:
1) Open a port
2) Write some data
3) Close the port
4) Open a *different* port
5) Write some data
6) Close the port
The second write sends nothing and the second close hangs.
If the first close() is omitted it works.
Adding logs to the the UART driver shows that the DMA is being setup but
the callback is never invoked for the second write.
This used to work in 4.19.
Git bisect leads to:
ad0d92d: "dmaengine: imx-sdma: refine to load context only once"
This commit adds a "context_loaded" flag used to avoid unnecessary context
setups.
However the flag is only reset in sdma_channel_terminate_work(),
which is only invoked in a worker triggered by sdma_terminate_all() IF
there is an active descriptor.
So, if no active descriptor remains when the channel is terminated, the
flag is not reset and, when the channel is later reused the old context
is used.
Fix the problem by always resetting the flag in sdma_free_chan_resources().
Cc: stable@vger.kernel.org
Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group>
Fixes: ad0d92d7ba ("dmaengine: imx-sdma: refine to load context only once")
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/1580305274-27274-1-git-send-email-martin.fuzzey@flowbird.group
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 582b4e5540 upstream.
On s390 there currently is no implementation of pud_write(). That was ok
as long as we had our own implementation of get_user_pages_fast() which
checked for pud protection by testing the bit directly w/o using
pud_write(). The other callers of pud_write() are not reachable on s390.
After commit 1a42010cdc ("s390/mm: convert to the generic
get_user_pages_fast code") we use the generic get_user_pages_fast(), which
does call pud_write() in pud_access_permitted() for FOLL_WRITE access on
a large pud. Without an s390 specific pud_write(), the generic version is
called, which contains a BUG() statement to remind us that we don't have a
proper implementation. This results in a kernel panic.
Fix this by providing an implementation of pud_write().
Cc: <stable@vger.kernel.org> # 5.2+
Fixes: 1a42010cdc ("s390/mm: convert to the generic get_user_pages_fast code")
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit df057c914a upstream.
In the initial MIO support introduced in
commit 71ba41c9b1 ("s390/pci: provide support for MIO instructions")
zpci_map_resource() and zpci_setup_resources() default to using the
mio_wb address as the resource's start address. This means users of the
mapping, which includes most drivers, will get write combining on PCI
Stores. This may lead to problems when drivers expect write through
behavior when not using an explicit ioremap_wc().
Cc: stable@vger.kernel.org
Fixes: 71ba41c9b1 ("s390/pci: provide support for MIO instructions")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 735a6dd022 upstream.
Explicitly set X86_FEATURE_OSPKE via set_cpu_cap() instead of calling
get_cpu_cap() to pull the feature bit from CPUID after enabling CR4.PKE.
Invoking get_cpu_cap() effectively wipes out any {set,clear}_cpu_cap()
changes that were made between this_cpu->c_init() and setup_pku(), as
all non-synthetic feature words are reinitialized from the CPU's CPUID
values.
Blasting away capability updates manifests most visibility when running
on a VMX capable CPU, but with VMX disabled by BIOS. To indicate that
VMX is disabled, init_ia32_feat_ctl() clears X86_FEATURE_VMX, using
clear_cpu_cap() instead of setup_clear_cpu_cap() so that KVM can report
which CPU is misconfigured (KVM needs to probe every CPU anyways).
Restoring X86_FEATURE_VMX from CPUID causes KVM to think VMX is enabled,
ultimately leading to an unexpected #GP when KVM attempts to do VMXON.
Arguably, init_ia32_feat_ctl() should use setup_clear_cpu_cap() and let
KVM figure out a different way to report the misconfigured CPU, but VMX
is not the only feature bit that is affected, i.e. there is precedent
that tweaking feature bits via {set,clear}_cpu_cap() after ->c_init()
is expected to work. Most notably, x86_init_rdrand()'s clearing of
X86_FEATURE_RDRAND when RDRAND malfunctions is also overwritten.
Fixes: 0697694564 ("x86/mm/pkeys: Actually enable Memory Protection Keys in the CPU")
Reported-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Jacob Keller <jacob.e.keller@intel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20200226231615.13664-1-sean.j.christopherson@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 138c9c32f0 upstream.
Commit f3186dd876 ("spi: Optionally use GPIO descriptors for CS GPIOs")
amended of_spi_parse_dt() to always set SPI_CS_HIGH for SPI slaves whose
Chip Select is defined by a "cs-gpios" devicetree property.
This change broke userspace applications which issue an SPI_IOC_WR_MODE
ioctl() to an spidev: Chip Select polarity will be incorrect unless the
application is changed to set SPI_CS_HIGH. And once changed, it will be
incompatible with kernels not containing the commit.
Fix by setting SPI_CS_HIGH in spidev_ioctl() (under the same conditions
as in of_spi_parse_dt()).
Fixes: f3186dd876 ("spi: Optionally use GPIO descriptors for CS GPIOs")
Reported-by: Simon Han <z.han@kunbus.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/fca3ba7cdc930cd36854666ceac4fbcf01b89028.1582027457.git.lukas@wunner.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org # v5.1+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c9f2833cb4 upstream.
In __cmd_record(), when receiving SIGINT(ctrl + c), a 'done' flag will
be set and the event list will be disabled by evlist__disable() once.
While in auxtrace_record.read_finish(), the related events will be
enabled again, if they are continuous, the recording seems to be
endless.
If the cs_etm event is disabled, we don't enable it again here.
Note: This patch is NOT tested since i don't have such a machine with
coresight feature, but the code seems buggy same as arm-spe and
intel-pt.
Tester notes:
Thanks for looping, Adrian. Applied this patch and tested with
CoreSight on juno board, it works well.
Signed-off-by: Wei Li <liwei391@huawei.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Tan Xiaojun <tanxiaojun@huawei.com>
Cc: stable@vger.kernel.org # 5.4+
Link: http://lore.kernel.org/lkml/20200214132654.20395-4-adrian.hunter@intel.com
[ahunter: removed redundant 'else' after 'return']
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 783fed2f35 upstream.
In __cmd_record(), when receiving SIGINT(ctrl + c), a 'done' flag will
be set and the event list will be disabled by evlist__disable() once.
While in auxtrace_record.read_finish(), the related events will be
enabled again, if they are continuous, the recording seems to be
endless.
If the intel_bts event is disabled, we don't enable it again here.
Note: This patch is NOT tested since i don't have such a machine with
intel_bts feature, but the code seems buggy same as arm-spe and
intel-pt.
Signed-off-by: Wei Li <liwei391@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Tan Xiaojun <tanxiaojun@huawei.com>
Cc: stable@vger.kernel.org # 5.4+
Link: http://lore.kernel.org/lkml/20200214132654.20395-3-adrian.hunter@intel.com
[ahunter: removed redundant 'else' after 'return']
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2da4dd3d69 upstream.
In __cmd_record(), when receiving SIGINT(ctrl + c), a 'done' flag will
be set and the event list will be disabled by evlist__disable() once.
While in auxtrace_record.read_finish(), the related events will be
enabled again, if they are continuous, the recording seems to be endless.
If the intel_pt event is disabled, we don't enable it again here.
Before the patch:
huawei@huawei-2288H-V5:~/linux-5.5-rc4/tools/perf$ ./perf record -e \
intel_pt//u -p 46803
^C^C^C^C^C^C
After the patch:
huawei@huawei-2288H-V5:~/linux-5.5-rc4/tools/perf$ ./perf record -e \
intel_pt//u -p 48591
^C[ perf record: Woken up 0 times to write data ]
Warning:
AUX data lost 504 times out of 4816!
[ perf record: Captured and wrote 2024.405 MB perf.data ]
Signed-off-by: Wei Li <liwei391@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Tan Xiaojun <tanxiaojun@huawei.com>
Cc: stable@vger.kernel.org # 5.4+
Link: http://lore.kernel.org/lkml/20200214132654.20395-2-adrian.hunter@intel.com
[ ahunter: removed redundant 'else' after 'return' ]
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
