Changes in 6.1.138
Revert "rndis_host: Flag RNDIS modems as WWAN devices"
ALSA: usb-audio: Add second USB ID for Jabra Evolve 65 headset
drm/nouveau: Fix WARN_ON in nouveau_fence_context_kill()
EDAC/altera: Test the correct error reg offset
EDAC/altera: Set DDR and SDMMC interrupt mask before registration
i2c: imx-lpi2c: Fix clock count when probe defers
arm64: errata: Add missing sentinels to Spectre-BHB MIDR arrays
parisc: Fix double SIGFPE crash
perf/x86/intel: KVM: Mask PEBS_ENABLE loaded for guest with vCPU's value.
amd-xgbe: Fix to ensure dependent features are toggled with RX checksum offload
irqchip/qcom-mpm: Prevent crash when trying to handle non-wake GPIOs
mmc: renesas_sdhi: Fix error handling in renesas_sdhi_probe
wifi: brcm80211: fmac: Add error handling for brcmf_usb_dl_writeimage()
dm-integrity: fix a warning on invalid table line
dm: always update the array size in realloc_argv on success
iommu/amd: Fix potential buffer overflow in parse_ivrs_acpihid
iommu/vt-d: Apply quirk_iommu_igfx for 8086:0044 (QM57/QS57)
platform/x86/intel-uncore-freq: Fix missing uncore sysfs during CPU hotplug
ksmbd: fix use-after-free in kerberos authentication
cpufreq: Avoid using inconsistent policy->min and policy->max
cpufreq: Fix setting policy limits when frequency tables are used
tracing: Fix oob write in trace_seq_to_buffer()
xfs: fix error returns from xfs_bmapi_write
xfs: fix xfs_bmap_add_extent_delay_real for partial conversions
xfs: remove a racy if_bytes check in xfs_reflink_end_cow_extent
xfs: require XFS_SB_FEAT_INCOMPAT_LOG_XATTRS for attr log intent item recovery
xfs: check opcode and iovec count match in xlog_recover_attri_commit_pass2
xfs: validate recovered name buffers when recovering xattr items
xfs: revert commit 44af6c7e59
xfs: match lock mode in xfs_buffered_write_iomap_begin()
xfs: make the seq argument to xfs_bmapi_convert_delalloc() optional
xfs: make xfs_bmapi_convert_delalloc() to allocate the target offset
xfs: convert delayed extents to unwritten when zeroing post eof blocks
xfs: allow symlinks with short remote targets
xfs: make sure sb_fdblocks is non-negative
xfs: fix freeing speculative preallocations for preallocated files
xfs: allow unlinked symlinks and dirs with zero size
xfs: restrict when we try to align cow fork delalloc to cowextsz hints
KVM: x86: Load DR6 with guest value only before entering .vcpu_run() loop
dm-bufio: don't schedule in atomic context
ASoC: soc-pcm: Fix hw_params() and DAPM widget sequence
wifi: plfxlc: Remove erroneous assert in plfxlc_mac_release
vxlan: vnifilter: Fix unlocked deletion of default FDB entry
net/mlx5: E-Switch, Initialize MAC Address for Default GID
net/mlx5: E-switch, Fix error handling for enabling roce
net: mscc: ocelot: treat 802.1ad tagged traffic as 802.1Q-untagged
net: mscc: ocelot: delete PVID VLAN when readding it as non-PVID
net: ethernet: mtk-star-emac: fix spinlock recursion issues on rx/tx poll
net: ethernet: mtk-star-emac: rearm interrupts in rx_poll only when advised
net_sched: drr: Fix double list add in class with netem as child qdisc
net_sched: hfsc: Fix a UAF vulnerability in class with netem as child qdisc
net_sched: ets: Fix double list add in class with netem as child qdisc
net_sched: qfq: Fix double list add in class with netem as child qdisc
ice: Check VF VSI Pointer Value in ice_vc_add_fdir_fltr()
net: dlink: Correct endianness handling of led_mode
net: dsa: felix: fix broken taprio gate states after clock jump
net: ipv6: fix UDPv6 GSO segmentation with NAT
bnxt_en: Fix coredump logic to free allocated buffer
bnxt_en: Fix out-of-bound memcpy() during ethtool -w
bnxt_en: Fix ethtool -d byte order for 32-bit values
nvme-tcp: fix premature queue removal and I/O failover
net: lan743x: Fix memleak issue when GSO enabled
net: fec: ERR007885 Workaround for conventional TX
net: hns3: store rx VLAN tag offload state for VF
net: hns3: fix an interrupt residual problem
net: hns3: fixed debugfs tm_qset size
net: hns3: defer calling ptp_clock_register()
net: vertexcom: mse102x: Fix possible stuck of SPI interrupt
net: vertexcom: mse102x: Fix LEN_MASK
net: vertexcom: mse102x: Add range check for CMD_RTS
net: vertexcom: mse102x: Fix RX error handling
md: move initialization and destruction of 'io_acct_set' to md.c
PCI: imx6: Skip controller_id generation logic for i.MX7D
sch_htb: make htb_qlen_notify() idempotent
sch_drr: make drr_qlen_notify() idempotent
sch_hfsc: make hfsc_qlen_notify() idempotent
sch_qfq: make qfq_qlen_notify() idempotent
sch_ets: make est_qlen_notify() idempotent
Revert "x86/kexec: Allocate PGD for x86_64 transition page tables separately"
firmware: arm_scmi: Balance device refcount when destroying devices
firmware: arm_ffa: Skip Rx buffer ownership release if not acquired
ARM: dts: opos6ul: add ksz8081 phy properties
net: phy: microchip: force IRQ polling mode for lan88xx
Revert "drm/meson: vclk: fix calculation of 59.94 fractional rates"
irqchip/gic-v2m: Mark a few functions __init
irqchip/gic-v2m: Prevent use after free of gicv2m_get_fwnode()
dm: fix copying after src array boundaries
iommu/arm-smmu-v3: Use the new rb tree helpers
iommu/arm-smmu-v3: Fix iommu_device_probe bug due to duplicated stream ids
drm/amd/display: phase2 enable mst hdcp multiple displays
drm/amd/display: Clean up style problems in amdgpu_dm_hdcp.c
drm/amd/display: Change HDCP update sequence for DM
drm/amd/display: Add scoped mutexes for amdgpu_dm_dhcp
drm/amd/display: Fix slab-use-after-free in hdcp
ASoC: Use of_property_read_bool()
ASoC: soc-core: Stop using of_property_read_bool() for non-boolean properties
Linux 6.1.138
Change-Id: I8f925d0c86ef5afce8775e0a7d2a2ba4bf287427
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
[ Upstream commit 6eab7034579917f207ca6d8e3f4e11e85e0ab7d5 ]
On R-Car:
OF: /sound: Read of boolean property 'simple-audio-card,bitclock-master' with a value.
OF: /sound: Read of boolean property 'simple-audio-card,frame-master' with a value.
or:
OF: /soc/sound@ec500000/ports/port@0/endpoint: Read of boolean property 'bitclock-master' with a value.
OF: /soc/sound@ec500000/ports/port@0/endpoint: Read of boolean property 'frame-master' with a value.
The use of of_property_read_bool() for non-boolean properties is
deprecated in favor of of_property_present() when testing for property
presence.
Replace testing for presence before calling of_property_read_u32() by
testing for an -EINVAL return value from the latter, to simplify the
code.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/db10e96fbda121e7456d70e97a013cbfc9755f4d.1737533954.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 69dd15a8ef0ae494179fd15023aa8172188db6b7 ]
Use of_property_read_bool() to read boolean properties rather than
of_get_property(). This is part of a larger effort to remove callers
of of_get_property() and similar functions. of_get_property() leaks
the DT property data pointer which is a problem for dynamically
allocated nodes which may be freed.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240731191312.1710417-20-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 6eab70345799 ("ASoC: soc-core: Stop using of_property_read_bool() for non-boolean properties")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b675ab8efbf2bcee25be29e865455c56e246401 ]
[Why]
Guards automatically release mutex when it goes out of scope making
code easier to follow.
[How]
Replace all use of mutex_lock()/mutex_unlock() with guard(mutex).
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: be593d9d91c5 ("drm/amd/display: Fix slab-use-after-free in hdcp")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 393e834848 ]
Refactor the sequence in hdcp_update_display() to use
mod_hdcp_update_display().
Previous sequence:
- remove()->add()
This Sequence was used to update the display, (mod_hdcp_update_display
didn't exist at the time). This meant for any hdcp updates (type changes,
enable/disable) we would remove, reconstruct, and add. This leads to
unnecessary calls to psp eventually
New Sequence using mod_hdcp_update_display():
- add() once when stream is enabled
- use update() for all updates
The update function checks for prev == new states and will not
unnecessarily end up calling psp via add/remove.
Reviewed-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: be593d9d91c5 ("drm/amd/display: Fix slab-use-after-free in hdcp")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aa9fdd5d5a ]
[why]
For MST topology with 1 physical link and multiple connectors (>=2),
e.g. daisy cahined MST + SST, or 1-to-multi MST hub, if userspace
set to enable the HDCP simultaneously on all connected outputs, the
commit tail iteratively call the hdcp_update_display() for each
display (connector). However, the hdcp workqueue data structure for
each link has only one DM connector and encryption status members,
which means the work queue of property_validate/update() would only
be triggered for the last connector within this physical link, and
therefore the HDCP property value of other connectors would stay on
DESIRED instead of switching to ENABLED, which is NOT as expected.
[how]
Use array of AMDGPU_DM_MAX_DISPLAY_INDEX for both aconnector and
encryption status in hdcp workqueue data structure for each physical
link. For property validate/update work queue, we iterates over the
array and do similar operation/check for each connected display.
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Signed-off-by: hersen wu <hersenxs.wu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: be593d9d91c5 ("drm/amd/display: Fix slab-use-after-free in hdcp")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b00d24997a11c10d3e420614f0873b83ce358a34 ]
ASPEED VGA card has two built-in devices:
0008:06:00.0 PCI bridge: ASPEED Technology, Inc. AST1150 PCI-to-PCI Bridge (rev 06)
0008:07:00.0 VGA compatible controller: ASPEED Technology, Inc. ASPEED Graphics Family (rev 52)
Its toplogy looks like this:
+-[0008:00]---00.0-[01-09]--+-00.0-[02-09]--+-00.0-[03]----00.0 Sandisk Corp Device 5017
| +-01.0-[04]--
| +-02.0-[05]----00.0 NVIDIA Corporation Device
| +-03.0-[06-07]----00.0-[07]----00.0 ASPEED Technology, Inc. ASPEED Graphics Family
| +-04.0-[08]----00.0 Renesas Technology Corp. uPD720201 USB 3.0 Host Controller
| \-05.0-[09]----00.0 Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
\-00.1 PMC-Sierra Inc. Device 4028
The IORT logic populaties two identical IDs into the fwspec->ids array via
DMA aliasing in iort_pci_iommu_init() called by pci_for_each_dma_alias().
Though the SMMU driver had been able to handle this situation since commit
563b5cbe33 ("iommu/arm-smmu-v3: Cope with duplicated Stream IDs"), that
got broken by the later commit cdf315f907 ("iommu/arm-smmu-v3: Maintain
a SID->device structure"), which ended up with allocating separate streams
with the same stuffing.
On a kernel prior to v6.15-rc1, there has been an overlooked warning:
pci 0008:07:00.0: vgaarb: setting as boot VGA device
pci 0008:07:00.0: vgaarb: bridge control possible
pci 0008:07:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
pcieport 0008:06:00.0: Adding to iommu group 14
ast 0008:07:00.0: stream 67328 already in tree <===== WARNING
ast 0008:07:00.0: enabling device (0002 -> 0003)
ast 0008:07:00.0: Using default configuration
ast 0008:07:00.0: AST 2600 detected
ast 0008:07:00.0: [drm] Using analog VGA
ast 0008:07:00.0: [drm] dram MCLK=396 Mhz type=1 bus_width=16
[drm] Initialized ast 0.1.0 for 0008:07:00.0 on minor 0
ast 0008:07:00.0: [drm] fb0: astdrmfb frame buffer device
With v6.15-rc, since the commit bcb81ac6ae3c ("iommu: Get DT/ACPI parsing
into the proper probe path"), the error returned with the warning is moved
to the SMMU device probe flow:
arm_smmu_probe_device+0x15c/0x4c0
__iommu_probe_device+0x150/0x4f8
probe_iommu_group+0x44/0x80
bus_for_each_dev+0x7c/0x100
bus_iommu_probe+0x48/0x1a8
iommu_device_register+0xb8/0x178
arm_smmu_device_probe+0x1350/0x1db0
which then fails the entire SMMU driver probe:
pci 0008:06:00.0: Adding to iommu group 21
pci 0008:07:00.0: stream 67328 already in tree
arm-smmu-v3 arm-smmu-v3.9.auto: Failed to register iommu
arm-smmu-v3 arm-smmu-v3.9.auto: probe with driver arm-smmu-v3 failed with error -22
Since SMMU driver had been already expecting a potential duplicated Stream
ID in arm_smmu_install_ste_for_dev(), change the arm_smmu_insert_master()
routine to ignore a duplicated ID from the fwspec->sids array as well.
Note: this has been failing the iommu_device_probe() since 2021, although a
recent iommu commit in v6.15-rc1 that moves iommu_device_probe() started to
fail the SMMU driver probe. Since nobody has cared about DMA Alias support,
leave that as it was but fix the fundamental iommu_device_probe() breakage.
Fixes: cdf315f907 ("iommu/arm-smmu-v3: Maintain a SID->device structure")
Cc: stable@vger.kernel.org
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/20250415185620.504299-1-nicolinc@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a2bb820e862d61f9ca1499e500915f9f505a2655 ]
Since v5.12 the rbtree has gained some simplifying helpers aimed at making
rb tree users write less convoluted boiler plate code. Instead the caller
provides a single comparison function and the helpers generate the prior
open-coded stuff.
Update smmu->streams to use rb_find_add() and rb_find().
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1-v3-9fef8cdc2ff6+150d1-smmuv3_tidy_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
Stable-dep-of: b00d24997a11 ("iommu/arm-smmu-v3: Fix iommu_device_probe bug due to duplicated stream ids")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3318dc299b072a0511d6dfd8367f3304fb6d9827 ]
With ACPI in place, gicv2m_get_fwnode() is registered with the pci
subsystem as pci_msi_get_fwnode_cb(), which may get invoked at runtime
during a PCI host bridge probe. But, the call back is wrongly marked as
__init, causing it to be freed, while being registered with the PCI
subsystem and could trigger:
Unable to handle kernel paging request at virtual address ffff8000816c0400
gicv2m_get_fwnode+0x0/0x58 (P)
pci_set_bus_msi_domain+0x74/0x88
pci_register_host_bridge+0x194/0x548
This is easily reproducible on a Juno board with ACPI boot.
Retain the function for later use.
Fixes: 0644b3daca ("irqchip/gic-v2m: acpi: Introducing GICv2m ACPI support")
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6e1a7bc8382b0d4208258f7d2a4474fae788dd90 ]
Commit c7e73b5051 ("ARM: imx: mach-imx6ul: remove 14x14 EVK specific
PHY fixup") removed a PHY fixup that setted the clock mode and the LED
mode.
Make the Ethernet interface work again by doing as advised in the
commit's log, set clock mode and the LED mode in the device tree.
Fixes: c7e73b5051 ("ARM: imx: mach-imx6ul: remove 14x14 EVK specific PHY fixup")
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4567bdaaaaa1744da3d7da07d9aca2f941f5b4e5 ]
Completion of the FFA_PARTITION_INFO_GET ABI transfers the ownership of
the caller’s Rx buffer from the producer(typically partition mnager) to
the consumer(this driver/OS). FFA_RX_RELEASE transfers the ownership
from the consumer back to the producer.
However, when we set the flag to just return the count of partitions
deployed in the system corresponding to the specified UUID while
invoking FFA_PARTITION_INFO_GET, the Rx buffer ownership shouldn't be
transferred to this driver. We must be able to skip transferring back
the ownership to the partition manager when we request just to get the
count of the partitions as the buffers are not acquired in this case.
Firmware may return FFA_RET_DENIED or other error for the ffa_rx_release()
in such cases.
Fixes: bb1be74985 ("firmware: arm_ffa: Add v1.1 get_partition_info support")
Message-Id: <20250321115700.3525197-1-sudeep.holla@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ca67840c0ddf3f39407339624cef824a4f27599 ]
Using device_find_child() to lookup the proper SCMI device to destroy
causes an unbalance in device refcount, since device_find_child() calls an
implicit get_device(): this, in turns, inhibits the call of the provided
release methods upon devices destruction.
As a consequence, one of the structures that is not freed properly upon
destruction is the internal struct device_private dev->p populated by the
drivers subsystem core.
KMemleak detects this situation since loading/unloding some SCMI driver
causes related devices to be created/destroyed without calling any
device_release method.
unreferenced object 0xffff00000f583800 (size 512):
comm "insmod", pid 227, jiffies 4294912190
hex dump (first 32 bytes):
00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N..........
ff ff ff ff ff ff ff ff 60 36 1d 8a 00 80 ff ff ........`6......
backtrace (crc 114e2eed):
kmemleak_alloc+0xbc/0xd8
__kmalloc_cache_noprof+0x2dc/0x398
device_add+0x954/0x12d0
device_register+0x28/0x40
__scmi_device_create.part.0+0x1bc/0x380
scmi_device_create+0x2d0/0x390
scmi_create_protocol_devices+0x74/0xf8
scmi_device_request_notifier+0x1f8/0x2a8
notifier_call_chain+0x110/0x3b0
blocking_notifier_call_chain+0x70/0xb0
scmi_driver_register+0x350/0x7f0
0xffff80000a3b3038
do_one_initcall+0x12c/0x730
do_init_module+0x1dc/0x640
load_module+0x4b20/0x5b70
init_module_from_file+0xec/0x158
$ ./scripts/faddr2line ./vmlinux device_add+0x954/0x12d0
device_add+0x954/0x12d0:
kmalloc_noprof at include/linux/slab.h:901
(inlined by) kzalloc_noprof at include/linux/slab.h:1037
(inlined by) device_private_init at drivers/base/core.c:3510
(inlined by) device_add at drivers/base/core.c:3561
Balance device refcount by issuing a put_device() on devices found via
device_find_child().
Reported-by: Alice Ryhl <aliceryhl@google.com>
Closes: https://lore.kernel.org/linux-arm-kernel/Z8nK3uFkspy61yjP@arm.com/T/#mc1f73a0ea5e41014fa145147b7b839fc988ada8f
CC: Sudeep Holla <sudeep.holla@arm.com>
CC: Catalin Marinas <catalin.marinas@arm.com>
Fixes: d4f9dddd21 ("firmware: arm_scmi: Add dynamic scmi devices creation")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Alice Ryhl <aliceryhl@google.com>
Message-Id: <20250306185447.2039336-1-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a7a15f39c682ac4268624da2abdb9114bdde96d5 upstream.
est_qlen_notify() deletes its class from its active list with
list_del() when qlen is 0, therefore, it is not idempotent and
not friendly to its callers, like fq_codel_dequeue().
Let's make it idempotent to ease qdisc_tree_reduce_backlog() callers'
life. Also change other list_del()'s to list_del_init() just to be
extra safe.
Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Link: https://patch.msgid.link/20250403211033.166059-6-xiyou.wangcong@gmail.com
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 51eb3b65544c9efd6a1026889ee5fb5aa62da3bb upstream.
hfsc_qlen_notify() is not idempotent either and not friendly
to its callers, like fq_codel_dequeue(). Let's make it idempotent
to ease qdisc_tree_reduce_backlog() callers' life:
1. update_vf() decreases cl->cl_nactive, so we can check whether it is
non-zero before calling it.
2. eltree_remove() always removes RB node cl->el_node, but we can use
RB_EMPTY_NODE() + RB_CLEAR_NODE() to make it safe.
Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250403211033.166059-4-xiyou.wangcong@gmail.com
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c567c86b90 upstream.
'io_acct_set' is only used for raid0 and raid456, prepare to use it for
raid1 and raid10, so that io accounting from different levels can be
consistent.
By the way, follow up patches will also use this io clone mechanism to
make sure 'active_io' represents in flight io, not io that is dispatching,
so that mddev_suspend will wait for io to be done as designed.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230621165110.1498313-2-yukuai1@huaweicloud.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ee512922ddd7d64afe2b28830a88f19063217649 ]
In case the CMD_RTS got corrupted by interferences, the MSE102x
doesn't allow a retransmission of the command. Instead the Ethernet
frame must be shifted out of the SPI FIFO. Since the actual length is
unknown, assume the maximum possible value.
Fixes: 2f207cbf0d ("net: vertexcom: Add MSE102x SPI support")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250430133043.7722-5-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d4dda902dac194e3231a1ed0f76c6c3b6340ba8a ]
Since there is no protection in the SPI protocol against electrical
interferences, the driver shouldn't blindly trust the length payload
of CMD_RTS. So introduce a bounds check for incoming frames.
Fixes: 2f207cbf0d ("net: vertexcom: Add MSE102x SPI support")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250430133043.7722-4-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 55f362885951b2d00fd7fbb02ef0227deea572c2 ]
The MSE102x doesn't provide any SPI commands for interrupt handling.
So in case the interrupt fired before the driver requests the IRQ,
the interrupt will never fire again. In order to fix this always poll
for pending packets after opening the interface.
Fixes: 2f207cbf0d ("net: vertexcom: Add MSE102x SPI support")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250430133043.7722-2-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8e6b9c6ea5a55045eed6526d8ee49e93192d1a58 ]
When a VF is passthrough to a VM, and the VM is killed, the reported
interrupt may not been handled, it will remain, and won't be clear by
the nic engine even with a flr or tqp reset. When the VM restart, the
interrupt of the first vector may be dropped by the second enable_irq
in vfio, see the issue below:
https://gitlab.com/qemu-project/qemu/-/issues/2884#note_2423361621
We notice that the vfio has always behaved this way, and the interrupt
is a residue of the nic engine, so we fix the problem by moving the
vector enable process out of the enable_irq loop.
Fixes: 08a100689d ("net: hns3: re-organize vector handle")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20250430093052.2400464-3-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ef2383d078edcbe3055032436b16cdf206f26de2 ]
The VF driver missed to store the rx VLAN tag strip state when
user change the rx VLAN tag offload state. And it will default
to enable the rx vlan tag strip when re-init VF device after
reset. So if user disable rx VLAN tag offload, and trig reset,
then the HW will still strip the VLAN tag from packet nad fill
into RX BD, but the VF driver will ignore it for rx VLAN tag
offload disabled. It may cause the rx VLAN tag dropped.
Fixes: b2641e2ad4 ("net: hns3: Add support of hardware rx-vlan-offload to HNS3 VF driver")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250430093052.2400464-2-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a179aad12badc43201cbf45d1e8ed2c1383c76b9 ]
Activate TX hang workaround also in
fec_enet_txq_submit_skb() when TSO is not enabled.
Errata: ERR007885
Symptoms: NETDEV WATCHDOG: eth0 (fec): transmit queue 0 timed out
commit 37d6017b84 ("net: fec: Workaround for imx6sx enet tx hang when enable three queues")
There is a TDAR race condition for mutliQ when the software sets TDAR
and the UDMA clears TDAR simultaneously or in a small window (2-4 cycles).
This will cause the udma_tx and udma_tx_arbiter state machines to hang.
So, the Workaround is checking TDAR status four time, if TDAR cleared by
hardware and then write TDAR, otherwise don't set TDAR.
Fixes: 53bb20d1fa ("net: fec: add variable reg_desc_active to speed things up")
Signed-off-by: Mattias Barthel <mattias.barthel@atlascopco.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250429090826.3101258-1-mattiasbarthel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d52e2e38b85c8b7bc00dca55c2499f46f8c8198 ]
Always map the `skb` to the LS descriptor. Previously skb was
mapped to EXT descriptor when the number of fragments is zero with
GSO enabled. Mapping the skb to EXT descriptor prevents it from
being freed, leading to a memory leak
Fixes: 23f0703c12 ("lan743x: Add main source files for new lan743x driver")
Signed-off-by: Thangaraj Samynathan <thangaraj.s@microchip.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250429052527.10031-1-thangaraj.s@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 77e40bbce93059658aee02786a32c5c98a240a8a ]
This patch addresses a data corruption issue observed in nvme-tcp during
testing.
In an NVMe native multipath setup, when an I/O timeout occurs, all
inflight I/Os are canceled almost immediately after the kernel socket is
shut down. These canceled I/Os are reported as host path errors,
triggering a failover that succeeds on a different path.
However, at this point, the original I/O may still be outstanding in the
host's network transmission path (e.g., the NIC’s TX queue). From the
user-space app's perspective, the buffer associated with the I/O is
considered completed since they're acked on the different path and may
be reused for new I/O requests.
Because nvme-tcp enables zero-copy by default in the transmission path,
this can lead to corrupted data being sent to the original target,
ultimately causing data corruption.
We can reproduce this data corruption by injecting delay on one path and
triggering i/o timeout.
To prevent this issue, this change ensures that all inflight
transmissions are fully completed from host's perspective before
returning from queue stop. To handle concurrent I/O timeout from multiple
namespaces under the same controller, always wait in queue stop
regardless of queue's state.
This aligns with the behavior of queue stopping in other NVMe fabric
transports.
Fixes: 3f2304f8c6 ("nvme-tcp: add NVMe over TCP host driver")
Signed-off-by: Michael Liang <mliang@purestorage.com>
Reviewed-by: Mohamed Khalfella <mkhalfella@purestorage.com>
Reviewed-by: Randy Jennings <randyj@purestorage.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 02e8be5a032cae0f4ca33c6053c44d83cf4acc93 ]
For version 1 register dump that includes the PCIe stats, the existing
code incorrectly assumes that all PCIe stats are 64-bit values. Fix it
by using an array containing the starting and ending index of the 32-bit
values. The loop in bnxt_get_regs() will use the array to do proper
endian swap for the 32-bit values.
Fixes: b5d600b027 ("bnxt_en: Add support for 'ethtool -d'")
Reviewed-by: Shruti Parab <shruti.parab@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b87bd94f34370bbf1dfa59352bed8efab5bf419 ]
When retrieving the FW coredump using ethtool, it can sometimes cause
memory corruption:
BUG: KFENCE: memory corruption in __bnxt_get_coredump+0x3ef/0x670 [bnxt_en]
Corrupted memory at 0x000000008f0f30e8 [ ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ] (in kfence-#45):
__bnxt_get_coredump+0x3ef/0x670 [bnxt_en]
ethtool_get_dump_data+0xdc/0x1a0
__dev_ethtool+0xa1e/0x1af0
dev_ethtool+0xa8/0x170
dev_ioctl+0x1b5/0x580
sock_do_ioctl+0xab/0xf0
sock_ioctl+0x1ce/0x2e0
__x64_sys_ioctl+0x87/0xc0
do_syscall_64+0x5c/0xf0
entry_SYSCALL_64_after_hwframe+0x78/0x80
...
This happens when copying the coredump segment list in
bnxt_hwrm_dbg_dma_data() with the HWRM_DBG_COREDUMP_LIST FW command.
The info->dest_buf buffer is allocated based on the number of coredump
segments returned by the FW. The segment list is then DMA'ed by
the FW and the length of the DMA is returned by FW. The driver then
copies this DMA'ed segment list to info->dest_buf.
In some cases, this DMA length may exceed the info->dest_buf length
and cause the above BUG condition. Fix it by capping the copy
length to not exceed the length of info->dest_buf. The extra
DMA data contains no useful information.
This code path is shared for the HWRM_DBG_COREDUMP_LIST and the
HWRM_DBG_COREDUMP_RETRIEVE FW commands. The buffering is different
for these 2 FW commands. To simplify the logic, we need to move
the line to adjust the buffer length for HWRM_DBG_COREDUMP_RETRIEVE
up, so that the new check to cap the copy length will work for both
commands.
Fixes: c74751f4c3 ("bnxt_en: Return error if FW returns more data than dump length")
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Shruti Parab <shruti.parab@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ea9376cf68230e05492f22ca45d329f16e262c7b ]
When handling HWRM_DBG_COREDUMP_LIST FW command in
bnxt_hwrm_dbg_dma_data(), the allocated buffer info->dest_buf is
not freed in the error path. In the normal path, info->dest_buf
is assigned to coredump->data and it will eventually be freed after
the coredump is collected.
Free info->dest_buf immediately inside bnxt_hwrm_dbg_dma_data() in
the error path.
Fixes: c74751f4c3 ("bnxt_en: Return error if FW returns more data than dump length")
Reported-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Shruti Parab <shruti.parab@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 426d487bca38b34f39c483edfc6313a036446b33 ]
Simplest setup to reproduce the issue: connect 2 ports of the
LS1028A-RDB together (eno0 with swp0) and run:
$ ip link set eno0 up && ip link set swp0 up
$ tc qdisc replace dev swp0 parent root handle 100 taprio num_tc 8 \
queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 map 0 1 2 3 4 5 6 7 \
base-time 0 sched-entry S 20 300000 sched-entry S 10 200000 \
sched-entry S 20 300000 sched-entry S 48 200000 \
sched-entry S 20 300000 sched-entry S 83 200000 \
sched-entry S 40 300000 sched-entry S 00 200000 flags 2
$ ptp4l -i eno0 -f /etc/linuxptp/configs/gPTP.cfg -m &
$ ptp4l -i swp0 -f /etc/linuxptp/configs/gPTP.cfg -m
One will observe that the PTP state machine on swp0 starts
synchronizing, then it attempts to do a clock step, and after that, it
never fails to recover from the condition below.
ptp4l[82.427]: selected best master clock 00049f.fffe.05f627
ptp4l[82.428]: port 1 (swp0): MASTER to UNCALIBRATED on RS_SLAVE
ptp4l[83.252]: port 1 (swp0): UNCALIBRATED to SLAVE on MASTER_CLOCK_SELECTED
ptp4l[83.886]: rms 4537731277 max 9075462553 freq -18518 +/- 11467 delay 818 +/- 0
ptp4l[84.170]: timed out while polling for tx timestamp
ptp4l[84.171]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it
ptp4l[84.172]: port 1 (swp0): send peer delay request failed
ptp4l[84.173]: port 1 (swp0): clearing fault immediately
ptp4l[84.269]: port 1 (swp0): SLAVE to LISTENING on INIT_COMPLETE
ptp4l[85.303]: timed out while polling for tx timestamp
ptp4l[84.171]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it
ptp4l[84.172]: port 1 (swp0): send peer delay request failed
ptp4l[84.173]: port 1 (swp0): clearing fault immediately
ptp4l[84.269]: port 1 (swp0): SLAVE to LISTENING on INIT_COMPLETE
ptp4l[85.303]: timed out while polling for tx timestamp
ptp4l[85.304]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it
ptp4l[85.305]: port 1 (swp0): send peer delay response failed
ptp4l[85.306]: port 1 (swp0): clearing fault immediately
ptp4l[86.304]: timed out while polling for tx timestamp
A hint is given by the non-zero statistics for dropped packets which
were expecting hardware TX timestamps:
$ ethtool --include-statistics -T swp0
(...)
Statistics:
tx_pkts: 30
tx_lost: 11
tx_err: 0
We know that when PTP clock stepping takes place (from ocelot_ptp_settime64()
or from ocelot_ptp_adjtime()), vsc9959_tas_clock_adjust() is called.
Another interesting hint is that placing an early return in
vsc9959_tas_clock_adjust(), so as to neutralize this function, fixes the
issue and TX timestamps are no longer dropped.
The debugging function written by me and included below is intended to
read the GCL RAM, after the admin schedule became operational, through
the two status registers available for this purpose:
QSYS_GCL_STATUS_REG_1 and QSYS_GCL_STATUS_REG_2.
static void vsc9959_print_tas_gcl(struct ocelot *ocelot)
{
u32 val, list_length, interval, gate_state;
int i, err;
err = read_poll_timeout(ocelot_read, val,
!(val & QSYS_PARAM_STATUS_REG_8_CONFIG_PENDING),
10, 100000, false, ocelot, QSYS_PARAM_STATUS_REG_8);
if (err) {
dev_err(ocelot->dev,
"Failed to wait for TAS config pending bit to clear: %pe\n",
ERR_PTR(err));
return;
}
val = ocelot_read(ocelot, QSYS_PARAM_STATUS_REG_3);
list_length = QSYS_PARAM_STATUS_REG_3_LIST_LENGTH_X(val);
dev_info(ocelot->dev, "GCL length: %u\n", list_length);
for (i = 0; i < list_length; i++) {
ocelot_rmw(ocelot,
QSYS_GCL_STATUS_REG_1_GCL_ENTRY_NUM(i),
QSYS_GCL_STATUS_REG_1_GCL_ENTRY_NUM_M,
QSYS_GCL_STATUS_REG_1);
interval = ocelot_read(ocelot, QSYS_GCL_STATUS_REG_2);
val = ocelot_read(ocelot, QSYS_GCL_STATUS_REG_1);
gate_state = QSYS_GCL_STATUS_REG_1_GATE_STATE_X(val);
dev_info(ocelot->dev, "GCL entry %d: states 0x%x interval %u\n",
i, gate_state, interval);
}
}
Calling it from two places: after the initial QSYS_TAS_PARAM_CFG_CTRL_CONFIG_CHANGE
performed by vsc9959_qos_port_tas_set(), and after the one done by
vsc9959_tas_clock_adjust(), I notice the following difference.
From the tc-taprio process context, where the schedule was initially
configured, the GCL looks like this:
mscc_felix 0000:00:00.5: GCL length: 8
mscc_felix 0000:00:00.5: GCL entry 0: states 0x20 interval 300000
mscc_felix 0000:00:00.5: GCL entry 1: states 0x10 interval 200000
mscc_felix 0000:00:00.5: GCL entry 2: states 0x20 interval 300000
mscc_felix 0000:00:00.5: GCL entry 3: states 0x48 interval 200000
mscc_felix 0000:00:00.5: GCL entry 4: states 0x20 interval 300000
mscc_felix 0000:00:00.5: GCL entry 5: states 0x83 interval 200000
mscc_felix 0000:00:00.5: GCL entry 6: states 0x40 interval 300000
mscc_felix 0000:00:00.5: GCL entry 7: states 0x0 interval 200000
But from the ptp4l clock stepping process context, when the
vsc9959_tas_clock_adjust() hook is called, the GCL RAM of the
operational schedule now looks like this:
mscc_felix 0000:00:00.5: GCL length: 8
mscc_felix 0000:00:00.5: GCL entry 0: states 0x0 interval 0
mscc_felix 0000:00:00.5: GCL entry 1: states 0x0 interval 0
mscc_felix 0000:00:00.5: GCL entry 2: states 0x0 interval 0
mscc_felix 0000:00:00.5: GCL entry 3: states 0x0 interval 0
mscc_felix 0000:00:00.5: GCL entry 4: states 0x0 interval 0
mscc_felix 0000:00:00.5: GCL entry 5: states 0x0 interval 0
mscc_felix 0000:00:00.5: GCL entry 6: states 0x0 interval 0
mscc_felix 0000:00:00.5: GCL entry 7: states 0x0 interval 0
I do not have a formal explanation, just experimental conclusions.
It appears that after triggering QSYS_TAS_PARAM_CFG_CTRL_CONFIG_CHANGE
for a port's TAS, the GCL entry RAM is updated anyway, despite what the
documentation claims: "Specify the time interval in
QSYS::GCL_CFG_REG_2.TIME_INTERVAL. This triggers the actual RAM
write with the gate state and the time interval for the entry number
specified". We don't touch that register (through vsc9959_tas_gcl_set())
from vsc9959_tas_clock_adjust(), yet the GCL RAM is updated anyway.
It seems to be updated with effectively stale memory, which in my
testing can hold a variety of things, including even pieces of the
previously applied schedule, for particular schedule lengths.
As such, in most circumstances it is very difficult to pinpoint this
issue, because the newly updated schedule would "behave strangely",
but ultimately might still pass traffic to some extent, due to some
gate entries still being present in the stale GCL entry RAM. It is easy
to miss.
With the particular schedule given at the beginning, the GCL RAM
"happens" to be reproducibly rewritten with all zeroes, and this is
consistent with what we see: when the time-aware shaper has gate entries
with all gates closed, traffic is dropped on TX, no wonder we can't
retrieve TX timestamps.
Rewriting the GCL entry RAM when reapplying the new base time fixes the
observed issue.
Fixes: 8670dc33f4 ("net: dsa: felix: update base time of time-aware shaper when adjusting PTP time")
Reported-by: Richie Pearn <richard.pearn@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250426144859.3128352-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e7e5ae71831c44d58627a991e603845a2fed2cab ]
As it's name suggests, parse_eeprom() parses EEPROM data.
This is done by reading data, 16 bits at a time as follows:
for (i = 0; i < 128; i++)
((__le16 *) sromdata)[i] = cpu_to_le16(read_eeprom(np, i));
sromdata is at the same memory location as psrom.
And the type of psrom is a pointer to struct t_SROM.
As can be seen in the loop above, data is stored in sromdata, and thus psrom,
as 16-bit little-endian values.
However, the integer fields of t_SROM are host byte order integers.
And in the case of led_mode this leads to a little endian value
being incorrectly treated as host byte order.
Looking at rio_set_led_mode, this does appear to be a bug as that code
masks led_mode with 0x1, 0x2 and 0x8. Logic that would be effected by a
reversed byte order.
This problem would only manifest on big endian hosts.
Found by inspection while investigating a sparse warning
regarding the crc field of t_SROM.
I believe that warning is a false positive. And although I plan
to send a follow-up to use little-endian types for other the integer
fields of PSROM_t I do not believe that will involve any bug fixes.
Compile tested only.
Fixes: c3f45d322c ("dl2k: Add support for IP1000A-based cards")
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250425-dlink-led-mode-v1-1-6bae3c36e736@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a6d0c00fa07972384b0c308c72db091d49988b6 ]
As described in Gerrard's report [1], there are use cases where a netem
child qdisc will make the parent qdisc's enqueue callback reentrant.
In the case of ets, there won't be a UAF, but the code will add the same
classifier to the list twice, which will cause memory corruption.
In addition to checking for qlen being zero, this patch checks whether
the class was already added to the active_list (cl_is_active) before
doing the addition to cater for the reentrant case.
[1] https://lore.kernel.org/netdev/CAHcdcOm+03OD2j6R0=YHKqmy=VgJ8xEOKuP6c7mSgnp-TEJJbw@mail.gmail.com/
Fixes: 37d9cf1a3c ("sched: Fix detection of empty queues in child qdiscs")
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20250425220710.3964791-4-victor@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f99a3fbf023e20b626be4b0f042463d598050c9a ]
As described in Gerrard's report [1], there are use cases where a netem
child qdisc will make the parent qdisc's enqueue callback reentrant.
In the case of drr, there won't be a UAF, but the code will add the same
classifier to the list twice, which will cause memory corruption.
In addition to checking for qlen being zero, this patch checks whether the
class was already added to the active_list (cl_is_active) before adding
to the list to cover for the reentrant case.
[1] https://lore.kernel.org/netdev/CAHcdcOm+03OD2j6R0=YHKqmy=VgJ8xEOKuP6c7mSgnp-TEJJbw@mail.gmail.com/
Fixes: 37d9cf1a3c ("sched: Fix detection of empty queues in child qdiscs")
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20250425220710.3964791-2-victor@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
