BPF ringbuf assumes the size to be a multiple of page size and the power of
2 value. The latter is important to avoid division while calculating position
inside the ring buffer and using (N-1) mask instead. This patch fixes omission
to enforce power-of-2 size rule.
Fixes: 457f44363a ("bpf: Implement BPF ring buffer and verifier support for it")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200630061500.1804799-1-andriin@fb.com
Choo! Choo! All aboard the Split Lock Express, with direct service to
Wreckage!
Skip split_lock_verify_msr() if the CPU isn't whitelisted as a possible
SLD-enabled CPU model to avoid writing MSR_TEST_CTRL. MSR_TEST_CTRL
exists, and is writable, on many generations of CPUs. Writing the MSR,
even with '0', can result in bizarre, undocumented behavior.
This fixes a crash on Haswell when resuming from suspend with a live KVM
guest. Because APs use the standard SMP boot flow for resume, they will
go through split_lock_init() and the subsequent RDMSR/WRMSR sequence,
which runs even when sld_state==sld_off to ensure SLD is disabled. On
Haswell (at least, my Haswell), writing MSR_TEST_CTRL with '0' will
succeed and _may_ take the SMT _sibling_ out of VMX root mode.
When KVM has an active guest, KVM performs VMXON as part of CPU onlining
(see kvm_starting_cpu()). Because SMP boot is serialized, the resulting
flow is effectively:
on_each_ap_cpu() {
WRMSR(MSR_TEST_CTRL, 0)
VMXON
}
As a result, the WRMSR can disable VMX on a different CPU that has
already done VMXON. This ultimately results in a #UD on VMPTRLD when
KVM regains control and attempt run its vCPUs.
The above voodoo was confirmed by reworking KVM's VMXON flow to write
MSR_TEST_CTRL prior to VMXON, and to serialize the sequence as above.
Further verification of the insanity was done by redoing VMXON on all
APs after the initial WRMSR->VMXON sequence. The additional VMXON,
which should VM-Fail, occasionally succeeded, and also eliminated the
unexpected #UD on VMPTRLD.
The damage done by writing MSR_TEST_CTRL doesn't appear to be limited
to VMX, e.g. after suspend with an active KVM guest, subsequent reboots
almost always hang (even when fudging VMXON), a #UD on a random Jcc was
observed, suspend/resume stability is qualitatively poor, and so on and
so forth.
kernel BUG at arch/x86/kvm/x86.c:386!
CPU: 1 PID: 2592 Comm: CPU 6/KVM Tainted: G D
Hardware name: ASUS Q87M-E/Q87M-E, BIOS 1102 03/03/2014
RIP: 0010:kvm_spurious_fault+0xf/0x20
Call Trace:
vmx_vcpu_load_vmcs+0x1fb/0x2b0
vmx_vcpu_load+0x3e/0x160
kvm_arch_vcpu_load+0x48/0x260
finish_task_switch+0x140/0x260
__schedule+0x460/0x720
_cond_resched+0x2d/0x40
kvm_arch_vcpu_ioctl_run+0x82e/0x1ca0
kvm_vcpu_ioctl+0x363/0x5c0
ksys_ioctl+0x88/0xa0
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x4c/0x170
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: dbaba47085 ("x86/split_lock: Rework the initialization flow of split lock detection")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20200605192605.7439-1-sean.j.christopherson@intel.com
Bit 8 would be the "global" bit, which does not quite make sense for non-leaf
page table entries. Intel ignores it; AMD ignores it in PDEs and PDPEs, but
reserves it in PML4Es.
Probably, earlier versions of the AMD manual documented it as reserved in PDPEs
as well, and that behavior made it into KVM as well as kvm-unit-tests; fix it.
Cc: stable@vger.kernel.org
Reported-by: Nadav Amit <namit@vmware.com>
Fixes: a0c0feb579 ("KVM: x86: reserve bit 8 of non-leaf PDPEs and PML4Es in 64-bit mode on AMD", 2014-09-03)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In flush_delete_work, instead of flushing each individual pending
delayed work item, cancel and re-queue them for immediate execution.
The waiting isn't needed here because we're already waiting for all
queued work items to complete in gfs2_flush_delete_work. This makes the
code more efficient, but more importantly, it avoids sleeping during a
rhashtable walk, inside rcu_read_lock().
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Log flush operations (gfs2_log_flush()) can target a specific transaction.
But if the function encounters errors (e.g. io errors) and withdraws,
the transaction was only freed it if was queued to one of the ail lists.
If the withdraw occurred before the transaction was queued to the ail1
list, function ail_drain never freed it. The result was:
BUG gfs2_trans: Objects remaining in gfs2_trans on __kmem_cache_shutdown()
This patch makes log_flush() add the targeted transaction to the ail1
list so that function ail_drain() will find and free it properly.
Cc: stable@vger.kernel.org # v5.7+
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Callers expect gfs2_inode_lookup to return an inode pointer or ERR_PTR(error).
Commit b66648ad6d caused it to return NULL instead of ERR_PTR(-ESTALE) in
some cases. Fix that.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: b66648ad6d ("gfs2: Move inode generation number check into gfs2_inode_lookup")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
If NO_DMA=y (e.g. Sun-3 all{mod,yes}-config):
drivers/iommu/dma-iommu.o: In function `iommu_dma_mmap':
dma-iommu.c:(.text+0x92e): undefined reference to `dma_pgprot'
IOMMU_DMA must not be selected, unless HAS_DMA=y.
Hence fix this by making SUN50I_IOMMU depend on HAS_DMA.
Fixes: 4100b8c229 ("iommu: Add Allwinner H6 IOMMU driver")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20200629121146.24011-1-geert@linux-m68k.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Pull irqchip fixes from Marc Zyngier:
- Fix atomicity of affinity update in the GIC driver
- Don't sleep in atomic when waiting for a GICv4.1 RD to respond
- Fix a couple of typos in user-visible messages
clang static analysis flags several null function pointer problems.
drivers/scsi/scsi_transport_spi.c:374:1: warning: Called function pointer is null (null dereference) [core.CallAndMessage]
spi_transport_max_attr(offset, "%d\n");
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Reviewing the store_spi_store_max macro
if (i->f->set_##field)
return -EINVAL;
should be
if (!i->f->set_##field)
return -EINVAL;
Link: https://lore.kernel.org/r/20200627133242.21618-1-trix@redhat.com
Reviewed-by: James Bottomley <jejb@linux.ibm.com>
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
genl_family_rcv_msg_attrs_parse() reuses the global family->attrbuf
when family->parallel_ops is false. However, family->attrbuf is not
protected by any lock on the genl_family_rcv_msg_doit() code path.
This leads to several different consequences, one of them is UAF,
like the following:
genl_family_rcv_msg_doit(): genl_start():
genl_family_rcv_msg_attrs_parse()
attrbuf = family->attrbuf
__nlmsg_parse(attrbuf);
genl_family_rcv_msg_attrs_parse()
attrbuf = family->attrbuf
__nlmsg_parse(attrbuf);
info->attrs = attrs;
cb->data = info;
netlink_unicast_kernel():
consume_skb()
genl_lock_dumpit():
genl_dumpit_info(cb)->attrs
Note family->attrbuf is an array of pointers to the skb data, once
the skb is freed, any dereference of family->attrbuf will be a UAF.
Maybe we could serialize the family->attrbuf with genl_mutex too, but
that would make the locking more complicated. Instead, we can just get
rid of family->attrbuf and always allocate attrbuf from heap like the
family->parallel_ops==true code path. This may add some performance
overhead but comparing with taking the global genl_mutex, it still
looks better.
Fixes: 75cdbdd089 ("net: ieee802154: have genetlink code to parse the attrs during dumpit")
Fixes: 057af70713 ("net: tipc: have genetlink code to parse the attrs during dumpit")
Reported-and-tested-by: syzbot+3039ddf6d7b13daf3787@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+80cad1e3cb4c41cde6ff@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+736bcbcb11b60d0c0792@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+520f8704db2b68091d44@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+c96e4dfb32f8987fdeed@syzkaller.appspotmail.com
Cc: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg says:
====================
Couple of fixes/small things:
* TX control port status check fixed to not assume frame format
* mesh control port fixes
* error handling/leak fixes when starting AP, with HE attributes
* fix broadcast packet handling with encapsulation offload
* add new AKM suites
* and a small code cleanup
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the following sparse warning:
arch/arm64/xen/../../arm/xen/enlighten.c:244: warning: macro
"GRANT_TABLE_PHYSADDR" is not used [-Wunused-macros]
It is an isolated macro, and should be removed when its last user
was deleted in the following commit 3cf4095d74 ("arm/xen: Use
xen_xlate_map_ballooned_pages to setup grant table")
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
When starting at 744MHz, the Mali 450 core crashes on S805X based boards:
lima d00c0000.gpu: IRQ ppmmu3 not found
lima d00c0000.gpu: IRQ ppmmu4 not found
lima d00c0000.gpu: IRQ ppmmu5 not found
lima d00c0000.gpu: IRQ ppmmu6 not found
lima d00c0000.gpu: IRQ ppmmu7 not found
Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.7.2+ #492
Hardware name: Libre Computer AML-S805X-AC (DT)
pstate: 40000005 (nZcv daif -PAN -UAO)
pc : lima_gp_init+0x28/0x188
...
Call trace:
lima_gp_init+0x28/0x188
lima_device_init+0x334/0x534
lima_pdev_probe+0xa4/0xe4
...
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
Reverting to a safer 666Mhz frequency on the S805X that doesn't use the
GP0 PLL makes it more stable.
Fixes: fd47716479 ("ARM64: dts: add S805X based P241 board")
Fixes: 0449b8e371 ("arm64: dts: meson: add libretech aml-s805x-ac board")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20200618132737.14243-1-narmstrong@baylibre.com
Make blk_ksm_destroy() use the kvfree_sensitive() function (which was
introduced in v5.8-rc1) instead of open-coding it.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Even if that's only a warning, not including asm/cacheflush.h
leads to svc_flush_bvec() being empty allthough powerpc defines
ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE.
CC net/sunrpc/svcsock.o
net/sunrpc/svcsock.c:227:5: warning: "ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE" is not defined [-Wundef]
#if ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE
^
Include linux/highmem.h so that asm/cacheflush.h will be included.
Reported-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reported-by: kernel test robot <lkp@intel.com>
Fixes: ca07eda33e ("SUNRPC: Refactor svc_recvfrom()")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
I don't understand this code well, but I'm seeing a warning about a
still-referenced inode on unmount, and every other similar filesystem
does a dput() here.
Fixes: e8a79fb14f ("nfsd: add nfsd/clients directory")
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We don't drop the reference on the nfsdfs filesystem with
mntput(nn->nfsd_mnt) until nfsd_exit_net(), but that won't be called
until the nfsd module's unloaded, and we can't unload the module as long
as there's a reference on nfsdfs. So this prevents module unloading.
Fixes: 2c830dd720 ("nfsd: persist nfsd filesystem across mounts")
Reported-and-Tested-by: Luo Xiaogang <lxgrxd@163.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Commit f16861b12f ("regulator: rename da903x to da903x-regulator") missed
to adjust the DIALOG SEMICONDUCTOR DRIVERS section in MAINTAINERS.
Hence, ./scripts/get_maintainer.pl --self-test=patterns complains:
warning: no file matches F: drivers/regulator/da903x.c
The da903x-regulator.c file is already covered by the pattern
drivers/regulator/da9???-regulator.[ch] in the section.
So, simply remove the non-matching file entry in MAINTAINERS.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20200628180229.5068-1-lukas.bulwahn@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pull spi fixes from Mark Brown:
"A batch of fixes for the Freescale DSPI driver fixing some serious
issues with removal of active devices and one resume case, plus a few
new PCI IDs for Intel platforms"
* tag 'spi-fix-v5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: pxa2xx: Add support for Intel Tiger Lake PCH-H
spi: spi-fsl-dspi: Initialize completion before possible interrupt
spi: spi-fsl-dspi: Fix external abort on interrupt in resume or exit paths
spi: spi-fsl-dspi: Fix lockup if device is shutdown during SPI transfer
spi: spi-fsl-dspi: Fix lockup if device is removed during SPI transfer
Pull thermal fixes from Daniel Lezcano:
- Fix undefined temperature if negative on the rcar_gen3 (Dien Pham)
- Fix wrong frequency converted from power for the cpufreq cooling
device (Finley Xiao)
- Fix compilation warnings by making functions static in the tsens
driver (Amit Kucheria)
- Fix return value of sprd_thm_probe for the Spreadtrum driver
(Tiezhu Yang)
- Fix bank number settings on the Mediatek mt8183 (Michael Kao)
- Fix missing of_node_put() at probe time i.MX (Anson Huang)
* tag 'thermal-v5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal/drivers/rcar_gen3: Fix undefined temperature if negative
thermal/drivers/cpufreq_cooling: Fix wrong frequency converted from power
thermal/drivers/tsens: Fix compilation warnings by making functions static
thermal/drivers/sprd: Fix return value of sprd_thm_probe()
thermal/drivers/mediatek: Fix bank number settings on mt8183
thermal/drivers: imx: Fix missing of_node_put() at probe time
Pull crypto fixes from Herbert Xu:
"This fixes two race conditions, one in padata and one in af_alg"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
padata: upgrade smp_mb__after_atomic to smp_mb in padata_do_serial
crypto: af_alg - fix use-after-free in af_alg_accept() due to bh_lock_sock()
This reverts commit e9c15badbb ("fs: Do not check if there is a
fsnotify watcher on pseudo inodes"). The commit intended to eliminate
fsnotify-related overhead for pseudo inodes but it is broken in
concept. inotify can receive events of pipe files under /proc/X/fd and
chromium relies on close and open events for sandboxing. Maxim Levitsky
reported the following
Chromium starts as a white rectangle, shows few white rectangles that
resemble its notifications and then crashes.
The stdout output from chromium:
[mlevitsk@starship ~]$chromium-freeworld
mesa: for the --simplifycfg-sink-common option: may only occur zero or one times!
mesa: for the --global-isel-abort option: may only occur zero or one times!
[3379:3379:0628/135151.440930:ERROR:browser_switcher_service.cc(238)] XXX Init()
../../sandbox/linux/seccomp-bpf-helpers/sigsys_handlers.cc:**CRASHING**:seccomp-bpf failure in syscall 0072
Received signal 11 SEGV_MAPERR 0000004a9048
Crashes are not universal but even if chromium does not crash, it certainly
does not work properly. While filtering just modify and access might be
safe, the benefit is not worth the risk hence the revert.
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Fixes: e9c15badbb ("fs: Do not check if there is a fsnotify watcher on pseudo inodes")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Syzbot reported that:
CPU: 1 PID: 6780 Comm: syz-executor153 Not tainted 5.7.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:__apic_accept_irq+0x46/0xb80
Call Trace:
kvm_arch_async_page_present+0x7de/0x9e0
kvm_check_async_pf_completion+0x18d/0x400
kvm_arch_vcpu_ioctl_run+0x18bf/0x69f0
kvm_vcpu_ioctl+0x46a/0xe20
ksys_ioctl+0x11a/0x180
__x64_sys_ioctl+0x6f/0xb0
do_syscall_64+0xf6/0x7d0
entry_SYSCALL_64_after_hwframe+0x49/0xb3
The testcase enables APF mechanism in MSR_KVM_ASYNC_PF_EN with ASYNC_PF_INT
enabled w/o setting MSR_KVM_ASYNC_PF_INT before, what's worse, interrupt
based APF 'page ready' event delivery depends on in kernel lapic, however,
we didn't bail out when lapic is not in kernel during guest setting
MSR_KVM_ASYNC_PF_EN which causes the null-ptr-deref in host later.
This patch fixes it.
Reported-by: syzbot+1bf777dfdde86d64b89b@syzkaller.appspotmail.com
Fixes: 2635b5c4a0 (KVM: x86: interrupt based APF 'page ready' event delivery)
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1593426391-8231-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Command line parameters might set static keys. This is true for s390 at
least since commit 6471384af2 ("mm: security: introduce init_on_alloc=1
and init_on_free=1 boot options"). To avoid the following WARN:
static_key_enable_cpuslocked(): static key 'init_on_alloc+0x0/0x40' used
before call to jump_label_init()
call jump_label_init() just before parse_early_param().
jump_label_init() is safe to call multiple times (x86 does that), doesn't
do any memory allocations and hence should be safe to call that early.
Fixes: 6471384af2 ("mm: security: introduce init_on_alloc=1 and init_on_free=1 boot options")
Cc: <stable@vger.kernel.org> # 5.3: d6df52e999: s390/maccess: add no DAT mode to kernel_write
Cc: <stable@vger.kernel.org> # 5.3
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
To be able to patch kernel code before paging is initialized do plain
memcpy if DAT is off. This is required to enable early jump label
initialization.
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
In usual IPL or hot plug scenarios a zPCI function transitions directly
from reserved (invisible to Linux) to configured state or is configured
by Linux itself using an SCLP, however it can also first go from
reserved to standby and then from standby to configured without
Linux initiative.
In this scenario we first get a PEC event 0x302 and then 0x301. This may
happen for example when the device is deconfigured at another LPAR and
made available for this LPAR. It may also happen under z/VM when
a device is attached while in some inconsistent state.
However when we get the 0x301 the device is already known to zPCI
so calling zpci_create() will add it twice resulting in the below
BUG. Instead we should only enable the existing device and finally
scan it through the PCI subsystem.
list_add double add: new=00000000ed5a9008, prev=00000000ed5a9008, next=0000000083502300.
kernel BUG at lib/list_debug.c:31!
Krnl PSW : 0704c00180000000 0000000082dc2db8 (__list_add_valid+0x70/0xa8)
Call Trace:
[<0000000082dc2db8>] __list_add_valid+0x70/0xa8
([<0000000082dc2db4>] __list_add_valid+0x6c/0xa8)
[<00000000828ea920>] zpci_create_device+0x60/0x1b0
[<00000000828ef04a>] zpci_event_availability+0x282/0x2f0
[<000000008315f848>] chsc_process_crw+0x2b8/0xa18
[<000000008316735c>] crw_collect_info+0x254/0x348
[<00000000829226ea>] kthread+0x14a/0x168
[<000000008319d5c0>] ret_from_fork+0x24/0x2c
Fixes: f606b3ef47 ("s390/pci: adapt events for zbus")
Reported-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Tested-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
After pulling 5.7.0 (linux-next merge), mcf5441x mmu boot was
hanging silently.
memblock_add() seems not appropriate, since using MAX_NUMNODES
as node id, while memblock_add_node() sets up memory for node id 0.
Signed-off-by: Angelo Dureghello <angelo.dureghello@timesys.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
The m68k nommu setup code didn't register the beginning of the physical
memory with memblock because it was anyway occupied by the kernel. However,
commit fa3354e4ea ("mm: free_area_init: use maximal zone PFNs rather than
zone sizes") changed zones initialization to use memblock.memory to detect
the zone extents and this caused inconsistency between zone PFNs and the
actual PFNs:
BUG: Bad page state in process swapper pfn:20165
page:41fe0ca0 refcount:0 mapcount:1 mapping:00000000 index:0x0 flags: 0x0()
raw: 00000000 00000100 00000122 00000000 00000000 00000000 00000000 00000000
page dumped because: nonzero mapcount
CPU: 0 PID: 1 Comm: swapper Not tainted 5.8.0-rc1-00001-g3a38f8a60c65-dirty #1
Stack from 404c9ebc:
404c9ebc 4029ab28 4029ab28 40088470 41fe0ca0 40299e21 40299df1 404ba2a4
00020165 00000000 41fd2c10 402c7ba0 41fd2c04 40088504 41fe0ca0 40299e21
00000000 40088a12 41fe0ca0 41fe0ca4 0000020a 00000000 00000001 402ca000
00000000 41fe0ca0 41fd2c10 41fd2c10 00000000 00000000 402b2388 00000001
400a0934 40091056 404c9f44 404c9f44 40088db4 402c7ba0 00000001 41fd2c04
41fe0ca0 41fd2000 41fe0ca0 40089e02 4026ecf4 40089e4e 41fe0ca0 ffffffff
Call Trace:
[<40088470>] 0x40088470
[<40088504>] 0x40088504
[<40088a12>] 0x40088a12
[<402ca000>] 0x402ca000
[<400a0934>] 0x400a0934
Adjust the memory registration with memblock to include the beginning of
the physical memory and make sure that the area occupied by the kernel is
marked as reserved.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Else there may be magic numbers in /sys/kernel/debug/block/*/state.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When the kernel panics, one page of kmsg data may be collected and sent to
Hyper-V to aid in diagnosing the failure. The collected kmsg data typically
contains 50 to 100 lines, each of which has a log level prefix that isn't
very useful from a diagnostic standpoint. So tell kmsg_dump_get_buffer()
to not include the log level, enabling more information that *is* useful to
fit in the page.
Requesting in stable kernels, since many kernels running in production are
stable releases.
Cc: stable@vger.kernel.org
Signed-off-by: Joseph Salisbury <joseph.salisbury@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1593210497-114310-1-git-send-email-joseph.salisbury@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
As description for DIV_ROUND_CLOSEST in file include/linux/kernel.h.
"Result is undefined for negative divisors if the dividend variable
type is unsigned and for negative dividends if the divisor variable
type is unsigned."
In current code, the FIXPT_DIV uses DIV_ROUND_CLOSEST but has not
checked sign of divisor before using. It makes undefined temperature
value in case the value is negative.
This patch fixes to satisfy DIV_ROUND_CLOSEST description
and fix bug too. Note that the variable name "reg" is not good
because it should be the same type as rcar_gen3_thermal_read().
However, it's better to rename the "reg" in a further patch as
cleanup.
Signed-off-by: Van Do <van.do.xw@renesas.com>
Signed-off-by: Dien Pham <dien.pham.ry@renesas.com>
[shimoda: minor fixes, add Fixes tag]
Fixes: 564e73d283 ("thermal: rcar_gen3_thermal: Add R-Car Gen3 thermal driver")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Niklas Soderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Niklas Soderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/1593085099-2057-1-git-send-email-yoshihiro.shimoda.uh@renesas.com
The function cpu_power_to_freq is used to find a frequency and set the
cooling device to consume at most the power to be converted. For example,
if the power to be converted is 80mW, and the em table is as follow.
struct em_cap_state table[] = {
/* KHz mW */
{ 1008000, 36, 0 },
{ 1200000, 49, 0 },
{ 1296000, 59, 0 },
{ 1416000, 72, 0 },
{ 1512000, 86, 0 },
};
The target frequency should be 1416000KHz, not 1512000KHz.
Fixes: 349d39dc57 ("thermal: cpu_cooling: merge frequency and power tables")
Cc: <stable@vger.kernel.org> # v4.13+
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200619090825.32747-1-finley.xiao@rock-chips.com
After merging tsens-common.c into tsens.c, we can now mark some
functions static so they don't need any prototype declarations. This
fixes the following issue reported by lkp.
>> drivers/thermal/qcom/tsens.c:385:13: warning: no previous prototype for 'tsens_critical_irq_thread' [-Wmissing-prototypes]
385 | irqreturn_t tsens_critical_irq_thread(int irq, void *data)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
>> drivers/thermal/qcom/tsens.c:455:13: warning: no previous prototype for 'tsens_irq_thread' [-Wmissing-prototypes]
455 | irqreturn_t tsens_irq_thread(int irq, void *data)
| ^~~~~~~~~~~~~~~~
>> drivers/thermal/qcom/tsens.c:523:5: warning: no previous prototype for 'tsens_set_trips' [-Wmissing-prototypes]
523 | int tsens_set_trips(void *_sensor, int low, int high)
| ^~~~~~~~~~~~~~~
>> drivers/thermal/qcom/tsens.c:560:5: warning: no previous prototype for 'tsens_enable_irq' [-Wmissing-prototypes]
560 | int tsens_enable_irq(struct tsens_priv *priv)
| ^~~~~~~~~~~~~~~~
>> drivers/thermal/qcom/tsens.c:573:6: warning: no previous prototype for 'tsens_disable_irq' [-Wmissing-prototypes]
573 | void tsens_disable_irq(struct tsens_priv *priv)
| ^~~~~~~~~~~~~~~~~
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/6757a26876b29922929abf64b1c11fa3b3033d03.1590579709.git.amit.kucheria@linaro.org
