Few dts fixes for omaps for v5.8
Few fixes for various devices:
- Prevent pocketgeagle header line signal from accidentally setting
micro-SD write protection signal by removing the default mux
- Fix NFSroot flakeyness after resume for duover by switching the
smsc911x gpio interrupt to back to level sensitive
- Fix regression for omap4 clockevent source after recent system
timer changes
- Yet another ethernet regression fix for the "rgmii" vs "rgmii-rxid"
phy-mode
* tag 'omap-for-v5.8/fixes-rc1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am5729: beaglebone-ai: fix rgmii phy-mode
ARM: dts: Fix omap4 system timer source clocks
ARM: dts: Fix duovero smsc interrupt for suspend
ARM: dts: am335x-pocketbeagle: Fix mmc0 Write Protect
Link: https://lore.kernel.org/r/pull-1592499282-121092@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Missed sdhci patch for am3 and am4
I forgot to send a pull request earlier for converting am3 and am4 to
use sdhci-omap driver instead of the old omap_hsmmc driver.
There was a display subsystem related suspend and resume regression found
recently and looks like I forgot to send a pull request for this patch
while debugging the regression. This patch has been tested without the
display subsystem, and has been in Linux next for several weeks now, so
would be good to have merged for v5.8.
* tag 'omap-for-v5.8/dt-missed-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: Move am33xx and am43xx mmc nodes to sdhci-omap driver
Link: https://lore.kernel.org/r/pull-1591637467-607254@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes for omaps for v5.8
The recent display subsystem (DSS) related platform data changes caused
display related regressions for suspend and resume. Looks like I only
tested suspend and resume before dropping the legacy platform data, and
forgot to test it after dropping it. Turns out the main issue was that
we no longer have platform code calling pm_runtime_suspend for DSS like
we did for the legacy platform data case, and that fix is still being
discussed on the dri-devel list and will get merged separately. The DSS
related testing exposed a pile other other display related issues that
also need fixing though:
- Fix ti-sysc optional clock handling and reset status checks
for devices that reset automatically in idle like DSS
- Ignore ti-sysc clockactivity bit unless separately requested
to avoid unexpected performance issues
- Init ti-sysc framedonetv_irq to true and disable for am4
- Avoid duplicate DSS reset for legacy mode with dts data
- Remove LCD timings for am4 as they cause warnings now that we're
using generic panels
Then there is a pile of other fixes not related to the DSS:
- Fix omap_prm reset deassert as we still have drivers setting the
pm_runtime_irq_safe() flag
- Flush posted write for ti-sysc enable and disable
- Fix droid4 spi related errors with spi flags
- Fix am335x USB range and a typo for softreset
- Fix dra7 timer nodes for clocks for IPU and DSP
- Drop duplicate mailboxes after mismerge for dra7
* tag 'omap-for-v5.8/fixes-merge-window-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
Revert "bus: ti-sysc: Increase max softreset wait"
ARM: dts: am437x-epos-evm: remove lcd timings
ARM: dts: am437x-gp-evm: remove lcd timings
ARM: dts: am437x-sk-evm: remove lcd timings
ARM: dts: dra7-evm-common: Fix duplicate mailbox nodes
ARM: dts: dra7: Fix timer nodes properly for timer_sys_ck clocks
ARM: dts: Fix am33xx.dtsi ti,sysc-mask wrong softreset flag
ARM: dts: Fix am33xx.dtsi USB ranges length
bus: ti-sysc: Increase max softreset wait
ARM: OMAP2+: Fix legacy mode dss_reset
bus: ti-sysc: Fix uninitialized framedonetv_irq
bus: ti-sysc: Ignore clockactivity unless specified as a quirk
bus: ti-sysc: Use optional clocks on for enable and wait for softreset bit
ARM: dts: omap4-droid4: Fix spi configuration and increase rate
bus: ti-sysc: Flush posted write on enable and disable
soc: ti: omap-prm: use atomic iopoll instead of sleeping one
Link: https://lore.kernel.org/r/pull-1591889257-410830@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The cell name stored in the afs_cell struct is a 64-char + NUL buffer -
when it needs to be able to handle up to AFS_MAXCELLNAME (256 chars) + NUL.
Fix this by changing the array to a pointer and allocating the string.
Found using Coverity.
Fixes: 989782dcdc ("afs: Overhaul cell database management")
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit cd238effef ("docs: kbuild: convert docs to ReST and rename to
*.rst") missed a ReST header and a verbatim file content area.
Signed-off-by: Dov Murik <dovmurik@linux.vnet.ibm.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
We can't cast sk_buff to rtable by (struct rtable *)hint. Use skb_rtable().
Fixes: 02b2494161 ("ipv4: use dst hint for ipv4 list receive")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
intel-pinctrl for v5.8-2
* Fix output pin value handling on Intel Baytrail
The following is an automated git shortlog grouped by driver:
baytrail:
- Fix pin being driven low for a while on gpiod_get(..., GPIOD_OUT_HIGH)
Pull cifs fixes from Steve French:
"Six cifs/smb3 fixes, three of them for stable.
Fixes xfstests 451, 313 and 316"
* tag '5.8-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: misc: Use array_size() in if-statement controlling expression
cifs: update ctime and mtime during truncate
cifs/smb3: Fix data inconsistent when punch hole
cifs/smb3: Fix data inconsistent when zero file range
cifs: Fix double add page to memcg when cifs_readpages
cifs: Fix cached_fid refcnt leak in open_shroot
Pull SCSI fixes from James Bottomley:
"Six small fixes, five in drivers and one to correct another minor
regression from cc97923a5b ("block: move dma drain handling to
scsi") where we still need the drain stub to be built in to the kernel
for the modular libata, non-modular SAS driver case"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: mptscsih: Fix read sense data size
scsi: zfcp: Fix panic on ERP timeout for previously dismissed ERP action
scsi: lpfc: Avoid another null dereference in lpfc_sli4_hba_unset()
scsi: libata: Fix the ata_scsi_dma_need_drain stub
scsi: qla2xxx: Keep initiator ports after RSCN
scsi: qla2xxx: Set NVMe status code for failed NVMe FCP request
Pull VFIO fixes from Alex Williamson:
- Fix double free of eventfd ctx (Alex Williamson)
- Fix duplicate use of capability ID (Alex Williamson)
- Fix SR-IOV VF memory enable handling (Alex Williamson)
* tag 'vfio-v5.8-rc3' of git://github.com/awilliam/linux-vfio:
vfio/pci: Fix SR-IOV VF handling with MMIO blocking
vfio/type1: Fix migration info capability ID
vfio/pci: Clear error and request eventfd ctx after releasing
Pull i2c fixes from Wolfram Sang:
"This contains a 5.8 regression fix for the Designware driver, a
register bitfield fix for the fsi driver, and a missing sanity check
for the I2C core"
* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: core: check returned size of emulated smbus block read
i2c: fsi: Fix the port number field in status register
i2c: designware: Adjust bus speed independently of ACPI
Pull staging driver fixes from Greg KH:
"Here are a small number of tiny staging driver fixes for 5.8-rc3.
Not much here, but there were some reported problems to be fixed:
- three wfx driver fixes
- rtl8723bs driver fix
All of these have been in linux-next with no reported issues"
* tag 'staging-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
Staging: rtl8723bs: prevent buffer overflow in update_sta_support_rate()
staging: wfx: fix coherency of hif_scan() prototype
staging: wfx: drop useless loop
staging: wfx: fix AC priority
Pull USB fixes from Greg KH:
"Here are some small USB fixes for 5.8-rc3 to resolve some reported
issues.
Nothing major here:
- gadget driver fixes
- cdns3 driver fixes
- xhci fixes
- renesas_usbhs driver fixes
- some new device support with ids
- documentation update
All of these have been in linux-next with no reported issues"
* tag 'usb-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (27 commits)
usb: renesas_usbhs: getting residue from callback_result
Revert "usb: dwc3: exynos: Add support for Exynos5422 suspend clk"
xhci: Poll for U0 after disabling USB2 LPM
xhci: Return if xHCI doesn't support LPM
usb: host: xhci-mtk: avoid runtime suspend when removing hcd
xhci: Fix enumeration issue when setting max packet size for FS devices.
xhci: Fix incorrect EP_STATE_MASK
usb: cdns3: ep0: add spinlock for cdns3_check_new_setup
usb: cdns3: trace: using correct dir value
usb: cdns3: ep0: fix the test mode set incorrectly
Revert "usb: dwc3: exynos: Add support for Exynos5422 suspend clk"
usb: gadget: udc: Potential Oops in error handling code
usb: phy: tegra: Fix unnecessary check in tegra_usb_phy_probe()
usb: dwc3: pci: Fix reference count leak in dwc3_pci_resume_work
usb: cdns3: ep0: add spinlock for cdns3_check_new_setup
usb: cdns3: trace: using correct dir value
usb: cdns3: ep0: fix the test mode set incorrectly
usb: typec: tcpci_rt1711h: avoid screaming irq causing boot hangs
USB: ohci-sm501: Add missed iounmap() in remove
cdc-acm: Add DISABLE_ECHO quirk for Microchip/SMSC chip
...
Pull char/misc fixes from Greg KH:
"Some tiny char/misc driver fixes for 5.8-rc3.
The "largest" changes are in the mei driver, to resolve some reported
problems and add some new device ids. There's also a binder bugfix, an
fpga driver build fix, and some assorted habanalabs fixes.
All of these, except for the habanalabs fixes, have been in linux-next
with no reported issues. The habanalabs driver changes showed up in my
tree on Friday, but as they are totally self-contained, all should be
good there"
* tag 'char-misc-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
habanalabs: increase h/w timer when checking idle
habanalabs: Correct handling when failing to enqueue CB
habanalabs: increase GAUDI QMAN ARB WDT timeout
habanalabs: rename mmu_write() to mmu_asid_va_write()
habanalabs: use PI in MMU cache invalidation
habanalabs: block scalar load_and_exe on external queue
mei: me: add tiger lake point device ids for H platforms.
mei: me: disable mei interface on Mehlow server platforms
binder: fix null deref of proc->context
fpga: zynqmp: fix modular build
Pull EDAC fix from Borislav Petkov:
"A single fix for amd64_edac restoring the reporting of the DRAM scrub
rate on family 0x15 CPUs"
* tag 'edac_urgent_for_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/amd64: Read back the scrub rate PCI register on F15h
Pull dma-mapping fixes from Christoph Hellwig:
- fix dma coherent mmap in nommu (me)
- more AMD SEV fallout (David Rientjes, me)
- fix alignment in dma_common_*_remap (Eric Auger)
* tag 'dma-mapping-5.8-4' of git://git.infradead.org/users/hch/dma-mapping:
dma-remap: align the size in dma_common_*_remap()
dma-mapping: DMA_COHERENT_POOL should select GENERIC_ALLOCATOR
dma-direct: add missing set_memory_decrypted() for coherent mapping
dma-direct: check return value when encrypting or decrypting memory
dma-direct: re-encrypt memory if dma_direct_alloc_pages() fails
dma-direct: always align allocation size in dma_direct_alloc_pages()
dma-direct: mark __dma_direct_alloc_pages static
dma-direct: re-enable mmap for !CONFIG_MMU
Pull NFS client bugfixes from Anna Schumaker:
"Stable Fixes:
- xprtrdma: Fix handling of RDMA_ERROR replies
- sunrpc: Fix rollback in rpc_gssd_dummy_populate()
- pNFS/flexfiles: Fix list corruption if the mirror count changes
- NFSv4: Fix CLOSE not waiting for direct IO completion
- SUNRPC: Properly set the @subbuf parameter of xdr_buf_subsegment()
Other Fixes:
- xprtrdma: Fix a use-after-free with r_xprt->rx_ep
- Fix other xprtrdma races during disconnect
- NFS: Fix memory leak of export_path"
* tag 'nfs-for-5.8-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
SUNRPC: Properly set the @subbuf parameter of xdr_buf_subsegment()
NFSv4 fix CLOSE not waiting for direct IO compeletion
pNFS/flexfiles: Fix list corruption if the mirror count changes
nfs: Fix memory leak of export_path
sunrpc: fixed rollback in rpc_gssd_dummy_populate()
xprtrdma: Fix handling of RDMA_ERROR replies
xprtrdma: Clean up disconnect
xprtrdma: Clean up synopsis of rpcrdma_flush_disconnect()
xprtrdma: Use re_connect_status safely in rpcrdma_xprt_connect()
xprtrdma: Prevent dereferencing r_xprt->rx_ep after it is freed
Pull io_uring fixes from Jens Axboe:
"Three small fixes:
- Close a corner case for polled IO resubmission (Pavel)
- Toss commands when exiting (Pavel)
- Fix SQPOLL conditional reschedule on perpetually busy submit
(Xuan)"
* tag 'io_uring-5.8-2020-06-26' of git://git.kernel.dk/linux-block:
io_uring: fix current->mm NULL dereference on exit
io_uring: fix hanging iopoll in case of -EAGAIN
io_uring: fix io_sq_thread no schedule when busy
Pull block fixes from Jens Axboe:
- NVMe pull request from Christoph:
- multipath deadlock fixes (Anton)
- NUMA fixes (Max)
- RDMA completion vector fix (Max)
- IO deadlock fix (Sagi)
- multipath reference fix (Sagi)
- NS mutation fix (Sagi)
- Use right allocator when freeing bip in error path (Chengguang)
* tag 'block-5.8-2020-06-26' of git://git.kernel.dk/linux-block:
nvme-multipath: fix bogus request queue reference put
nvme-multipath: fix deadlock due to head->lock
nvme: don't protect ns mutation with ns->head->lock
nvme-multipath: fix deadlock between ana_work and scan_work
nvme: fix possible deadlock when I/O is blocked
nvme-rdma: assign completion vector correctly
nvme-loop: initialize tagset numa value to the value of the ctrl
nvme-tcp: initialize tagset numa value to the value of the ctrl
nvme-pci: initialize tagset numa value to the value of the ctrl
nvme-pci: override the value of the controller's numa node
nvme: set initial value for controller's numa node
block: release bip in a right way in error path
Pull device mapper fixes from Mike Snitzer:
- Quite a few DM zoned target fixes and a Zone append fix in DM core.
Considering the amount of dm-zoned changes that went in during the
5.8 merge window these fixes are not that surprising.
- A few DM writecache target fixes.
- A fix to Documentation index to include DM ebs target docs.
- Small cleanup to use struct_size() in DM core's retrieve_deps().
* tag 'for-5.8/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm writecache: add cond_resched to loop in persistent_memory_claim()
dm zoned: Fix reclaim zone selection
dm zoned: Fix random zone reclaim selection
dm: update original bio sector on Zone Append
dm zoned: Fix metadata zone size check
docs: device-mapper: add dm-ebs.rst to an index file
dm ioctl: use struct_size() helper in retrieve_deps()
dm writecache: skip writecache_wait when using pmem mode
dm writecache: correct uncommitted_block when discarding uncommitted entry
dm zoned: assign max_io_len correctly
dm zoned: fix uninitialized pointer dereference
Pull kgdb fixes from Daniel Thompson:
"The main change here is a fix for a number of unsafe interactions
between kdb and the console system. The fixes are specific to kdb
(pure kgdb debugging does not use the console system at all). On
systems with an NMI then kdb, if it is enabled, must get messages to
the user despite potentially running from some "difficult" calling
contexts. These fixes avoid using the console system where we have
been provided an alternative (safer) way to interact with the user
and, if using the console system in unavoidable, use oops_in_progress
for deadlock avoidance. These fixes also ensure kdb honours the
console enable flag.
Also included is a fix that wraps kgdb trap handling in an RCU read
lock to avoids triggering diagnostic warnings. This is a wide lock
scope but this is OK because kgdb is a stop-the-world debugger. When
we stop the world we put all the CPUs into holding pens and this
inhibits RCU update anyway"
* tag 'kgdb-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
kgdb: Avoid suspicious RCU usage warning
kdb: Switch to use safer dbg_io_ops over console APIs
kdb: Make kdb_printf() console handling more robust
kdb: Check status of console prior to invoking handlers
kdb: Re-factor kdb_printf() message write code
Pull powerpc fixes from Michael Ellerman:
- A fix for a crash in nested KVM when CONFIG_DEBUG_VIRTUAL=y.
- Two minor build fixes.
Thanks to: Aneesh Kumar K.V, Arseny Solokha, Harish.
* tag 'powerpc-5.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Fix build failure in ebb tests
powerpc/kvm/book3s64: Fix kernel crash with nested kvm & DEBUG_VIRTUAL
powerpc/fsl_booke/32: Fix build with CONFIG_RANDOMIZE_BASE
Pull RISC-V fixes from Palmer Dabbelt:
"This contains a handful of fixes I'd like to target for rc3.
Most of them fix issues with the conversion of our vDSO to C. There is
also one fix to the SiFive PRCI driver that I picked up as it's
causing boot issues on the hardware.
- A fix to allow kernels with dynamic ftrace to use the vDSO.
- Some build fixes for the C vDSO functions.
- A fix to the PRCI driver's memory allocation, which was the cause
of some boot panics with FREELIST_RANDOM"
* tag 'riscv-for-linus-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fixup __vdso_gettimeofday broke dynamic ftrace
riscv: Add extern declarations for vDSO time-related functions
clk: sifive: allocate sufficient memory for struct __prci_data
riscv: Add -fPIC option to CFLAGS_vgettimeofday.o
Pull arm64 fixes from Will Deacon:
"The big fix here is to our vDSO sigreturn trampoline as, after a
painfully long stint of debugging, it turned out that fixing some of
our CFI directives in the merge window lit up a bunch of logic in
libgcc which has been shown to SEGV in some cases during asynchronous
pthread cancellation.
It looks like we can fix this by extending the directives to restore
most of the interrupted register state from the sigcontext, but it's
risky and hard to test so we opted to remove the CFI directives for
now and rely on the unwinder fallback path like we used to.
- Fix unwinding through vDSO sigreturn trampoline
- Fix build warnings by raising minimum LD version for PAC
- Whitelist some Kryo Cortex-A55 derivatives for Meltdown and SSB
- Fix perf register PC reporting for compat tasks
- Fix 'make clean' warning for arm64 signal selftests
- Fix ftrace when BTI is compiled in
- Avoid building the compat vDSO using GCC plugins"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Add KRYO{3,4}XX silver CPU cores to SSB safelist
arm64: perf: Report the PC value in REGS_ABI_32 mode
kselftest: arm64: Remove redundant clean target
arm64: kpti: Add KRYO{3, 4}XX silver CPU cores to kpti safelist
arm64: Don't insert a BTI instruction at inner labels
arm64: vdso: Don't use gcc plugins for building vgettimeofday.c
arm64: vdso: Only pass --no-eh-frame-hdr when linker supports it
arm64: Depend on newer binutils when building PAC
arm64: compat: Remove 32-bit sigreturn code from the vDSO
arm64: compat: Always use sigpage for sigreturn trampoline
arm64: compat: Allow 32-bit vdso and sigpage to co-exist
arm64: vdso: Disable dwarf unwinding through the sigreturn trampoline
Commit 8e20fc3917 ("serial_core: Move sysrq functions from header
file") converted the inline sysrq helpers to exported functions which
are now called for every received character, interrupt and break signal
also on systems without CONFIG_MAGIC_SYSRQ_SERIAL instead of being
optimised away by the compiler.
Inlining these helpers again also avoids the function call overhead when
CONFIG_MAGIC_SYSRQ_SERIAL is enabled (e.g. when the port is not used as
a console).
Fixes: 8e20fc3917 ("serial_core: Move sysrq functions from header file")
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://lore.kernel.org/r/20200610152232.16925-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
devm_gpiod_get_index() doesn't return NULL but -ENOENT when the
requested GPIO doesn't exist, leading to the following messages:
[ 2.742468] gpiod_direction_input: invalid GPIO (errorpointer)
[ 2.748147] can't set direction for gpio #2: -2
[ 2.753081] gpiod_direction_input: invalid GPIO (errorpointer)
[ 2.758724] can't set direction for gpio #3: -2
[ 2.763666] gpiod_direction_output: invalid GPIO (errorpointer)
[ 2.769394] can't set direction for gpio #4: -2
[ 2.774341] gpiod_direction_input: invalid GPIO (errorpointer)
[ 2.779981] can't set direction for gpio #5: -2
[ 2.784545] ff000a20.serial: ttyCPM1 at MMIO 0xfff00a20 (irq = 39, base_baud = 8250000) is a CPM UART
Use devm_gpiod_get_index_optional() instead.
At the same time, handle the error case and properly exit
with an error.
Fixes: 97cbaf2c82 ("tty: serial: cpm_uart: Convert to use GPIO descriptors")
Cc: stable@vger.kernel.org
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/694a25fdce548c5ee8b060ef6a4b02746b8f25c0.1591986307.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While the man page usbipd.8 already informs the user on which
kernel module has to be used on server side, the man page usbip.8
does not provide any equivalent information on client side.
Also, it could be hard for a newbie to identify the proper usbip
client kernel module, due to the name "vhci-hcd" that has no
immediate assonance with usbip.
Add in usbip.8 the command to add the module vhci-hcd, similarly
as it's already present in usbipd.8 for usbip-host.
While there, rephrase the description of the command "usbip list
--remote=server".
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
--
v1->v2: rephrase the description of command "usbip list ..."
fix a typo in commit message
Link: https://lore.kernel.org/r/2da8fc9e34440c1fa5f9007baaa3921767cdec50.1593090874.git.borneo.antonio@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The mpt fusion driver still uses the legacy PCI DMA API which hardcodes
atomic allocations. This caused the driver to fail to load on some powerpc
VMs with incoherent DMA and small memory sizes. Switch to use the modern
DMA API and sleeping allocations for large allocations instead. This is
not a full cleanup of the PCI DMA API usage yet, but just enough to fix the
regression caused by reducing the default atomic pool size.
Link: https://lore.kernel.org/r/20200624165724.1818496-1-hch@lst.de
Fixes: 3ee06a6d53 ("dma-pool: fix too large DMA pools on medium memory size systems")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When an rport event (RPORT_EV_READY) is updated without work being queued,
avoid taking an additional reference.
This issue was leading to memory leak. Trace from KMEMLEAK tool:
unreferenced object 0xffff8888259e8780 (size 512):
comm "kworker/2:1", jiffies 4433237386 (age 113021.971s)
hex dump (first 32 bytes):
58 0a ec cf 83 88 ff ff 00 00 00 00 00 00 00 00
01 00 00 00 08 00 00 00 13 7d f0 1e 0e 00 00 10
backtrace:
[<000000006b25760f>] fc_rport_recv_req+0x3c6/0x18f0 [libfc]
[<00000000f208d994>] fc_lport_recv_els_req+0x120/0x8a0 [libfc]
[<00000000a9c437b8>] fc_lport_recv+0xb9/0x130 [libfc]
[<00000000a9c437b8>] fc_lport_recv+0xb9/0x130 [libfc]
[<00000000ad5be37b>] qedf_ll2_process_skb+0x73d/0xad0 [qedf]
[<00000000e0eb6893>] process_one_work+0x382/0x6c0
[<000000002dfd9e21>] worker_thread+0x57/0x5c0
[<00000000b648204f>] kthread+0x1a0/0x1c0
[<0000000072f5ab20>] ret_from_fork+0x35/0x40
[<000000001d5c05d8>] 0xffffffffffffffff
Below is the log sequence which leads to memory leak. Here we get the
RPORT_EV_READY and RPORT_EV_STOP back to back, which lead to overwrite the
event RPORT_EV_READY by event RPORT_EV_STOP. Because of this, kref_count
gets incremented by 1.
kernel: host0: rport fffce5: Received PLOGI request
kernel: host0: rport fffce5: Received PLOGI in INIT state
kernel: host0: rport fffce5: Port is Ready
kernel: host0: rport fffce5: Received PRLI request while in state Ready
kernel: host0: rport fffce5: PRLI rspp type 8 active 1 passive 0
kernel: host0: rport fffce5: Received LOGO request while in state Ready
kernel: host0: rport fffce5: Delete port
kernel: host0: rport fffce5: Received PLOGI request
kernel: host0: rport fffce5: Received PLOGI in state Delete - send busy
kernel: host0: rport fffce5: work event 3
kernel: host0: rport fffce5: lld callback ev 3
kernel: host0: rport fffce5: work delete
Link: https://lore.kernel.org/r/20200626094959.32151-1-jhasan@marvell.com
Reviewed-by: Girish Basrur <gbasrur@marvell.com>
Reviewed-by: Saurav Kashyap <skashyap@marvell.com>
Reviewed-by: Shyam Sundar <ssundar@marvell.com>
Signed-off-by: Javed Hasan <jhasan@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Handling of extra kref which is done by lookup table in case rdata is
already present in list.
This issue was leading to memory leak. Trace from KMEMLEAK tool:
unreferenced object 0xffff8888259e8780 (size 512):
comm "kworker/2:1", pid 182614, jiffies 4433237386 (age 113021.971s)
hex dump (first 32 bytes):
58 0a ec cf 83 88 ff ff 00 00 00 00 00 00 00 00
01 00 00 00 08 00 00 00 13 7d f0 1e 0e 00 00 10
backtrace:
[<000000006b25760f>] fc_rport_recv_req+0x3c6/0x18f0 [libfc]
[<00000000f208d994>] fc_lport_recv_els_req+0x120/0x8a0 [libfc]
[<00000000a9c437b8>] fc_lport_recv+0xb9/0x130 [libfc]
[<00000000ad5be37b>] qedf_ll2_process_skb+0x73d/0xad0 [qedf]
[<00000000e0eb6893>] process_one_work+0x382/0x6c0
[<000000002dfd9e21>] worker_thread+0x57/0x5c0
[<00000000b648204f>] kthread+0x1a0/0x1c0
[<0000000072f5ab20>] ret_from_fork+0x35/0x40
[<000000001d5c05d8>] 0xffffffffffffffff
Below is the log sequence which leads to memory leak. Here we get the
nested "Received PLOGI request" for same port and this request leads to
call the fc_rport_create() twice for the same rport.
kernel: host1: rport fffce5: Received PLOGI request
kernel: host1: rport fffce5: Received PLOGI in INIT state
kernel: host1: rport fffce5: Port is Ready
kernel: host1: rport fffce5: Received PRLI request while in state Ready
kernel: host1: rport fffce5: PRLI rspp type 8 active 1 passive 0
kernel: host1: rport fffce5: Received LOGO request while in state Ready
kernel: host1: rport fffce5: Delete port
kernel: host1: rport fffce5: Received PLOGI request
kernel: host1: rport fffce5: Received PLOGI in state Delete - send busy
Link: https://lore.kernel.org/r/20200622101212.3922-2-jhasan@marvell.com
Reviewed-by: Girish Basrur <gbasrur@marvell.com>
Reviewed-by: Saurav Kashyap <skashyap@marvell.com>
Reviewed-by: Shyam Sundar <ssundar@marvell.com>
Signed-off-by: Javed Hasan <jhasan@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Disable the plane if it's not visible. Otherwise mtk_ovl_layer_config()
would proceed with invalid plane and we may see vblank timeout.
Fixes: 119f517362 ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
ARMv8 Juno/Vexpress/Fast Models fix for v5.8
Partial revert of some recent fixes to silence DTC warning which broke
clocks on some Vexpress platforms resulting in boot issues.
* tag 'juno-fix-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm: dts: vexpress: Move mcc node back into motherboard node
Link: https://lore.kernel.org/r/20200609180447.GB5732@bogus
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The rings bitmap of an interrupt vector encodes
which of the device's rings were assigned to that
interrupt vector.
Hence the iteration range of the tx rings bitmap
(for_each_set_bit()) should be the total number of
Tx rings of that netdevice instead of the number of
rings assigned to the interrupt vector.
Since there are 2 cores, and one interrupt vector for
each core, the number of rings asigned to an interrupt
vector is half the number of available rings.
The impact of this error is that the upper half of the
tx rings could still generate interrupts during napi
polling.
Fixes: d4fd0404c1 ("enetc: Introduce basic PF and VF ENETC ethernet drivers")
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, if the kernel is configured incorrectly or if it crashes before any
kunit tests are run, kunit finishes without error, reporting
that 0 test cases were run.
To fix this, an error is shown when the tap header is not found, which
indicates that kunit was not able to run at all.
Signed-off-by: Uriel Guajardo <urielguajardo@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Commit 8b59cd81dc ("kbuild: ensure full rebuild when the compiler is
updated") introduced a new CONFIG option CONFIG_CC_VERSION_TEXT. On my
system, this is set to "gcc (GCC) 10.1.0" which breaks KUnit config
parsing which did not like the spaces in the string.
Fix this by updating the regex to allow strings containing spaces.
Fixes: 8b59cd81dc ("kbuild: ensure full rebuild when the compiler is updated")
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Pull ACPI fixes from Rafael Wysocki:
"Prevent bypassing kernel lockdown via the ACPI tables loading
interface (Jason A. Donenfeld) and fix the handling of an ACPI sysfs
attribute (Nathan Chancellor)"
* tag 'acpi-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: sysfs: Fix pm_profile_attr type
ACPI: configfs: Disallow loading ACPI tables when locked down
