[ Upstream commit 6321aa1975 ]
clang warns about overflowing the data[] member in the struct pnpipehdr:
net/phonet/pep.c:295:8: warning: array index 4 is past the end of the array (which contains 1 element) [-Warray-bounds]
if (hdr->data[4] == PEP_IND_READY)
^ ~
include/net/phonet/pep.h:66:3: note: array 'data' declared here
u8 data[1];
Using a flexible array member at the end of the struct avoids the
warning, but since we cannot have a flexible array member inside
of the union, each index now has to be moved back by one, which
makes it a little uglier.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Rémi Denis-Courmont <remi@remlab.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c09551c6ff ]
According to the algorithm described in the comment block at the
beginning of ip_rt_send_redirect, the host should try to send
'ip_rt_redirect_number' ICMP redirect packets with an exponential
backoff and then stop sending them at all assuming that the destination
ignores redirects.
If the device has previously sent some ICMP error packets that are
rate-limited (e.g TTL expired) and continues to receive traffic,
the redirect packets will never be transmitted. This happens since
peer->rate_tokens will be typically greater than 'ip_rt_redirect_number'
and so it will never be reset even if the redirect silence timeout
(ip_rt_redirect_silence) has elapsed without receiving any packet
requiring redirects.
Fix it by using a dedicated counter for the number of ICMP redirect
packets that has been sent by the host
I have not been able to identify a given commit that introduced the
issue since ip_rt_send_redirect implements the same rate-limiting
algorithm from commit 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 04c03114be ]
soukjin bae reported a crash in tcp_v4_err() handling
ICMP_DEST_UNREACH after tcp_write_queue_head(sk)
returned a NULL pointer.
Current logic should have prevented this :
if (seq != tp->snd_una || !icsk->icsk_retransmits ||
!icsk->icsk_backoff || fastopen)
break;
Problem is the write queue might have been purged
and icsk_backoff has not been cleared.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: soukjin bae <soukjin.bae@samsung.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change-Id: I35ad73b5884ed21f842874185d43b1180e16df2e
commit 10596608c4 upstream.
Currently, there are two different methods to store an u16 integer to
the u32 data register. For example:
u32 *dest = ®s->data[priv->dreg];
1. *dest = 0; *(u16 *) dest = val_u16;
2. *dest = val_u16;
For method 1, the u16 value will be stored like this, either in
big-endian or little-endian system:
0 15 31
+-+-+-+-+-+-+-+-+-+-+-+-+
| Value | 0 |
+-+-+-+-+-+-+-+-+-+-+-+-+
For method 2, in little-endian system, the u16 value will be the same
as listed above. But in big-endian system, the u16 value will be stored
like this:
0 15 31
+-+-+-+-+-+-+-+-+-+-+-+-+
| 0 | Value |
+-+-+-+-+-+-+-+-+-+-+-+-+
So later we use "memcmp(®s->data[priv->sreg], data, 2);" to do
compare in nft_cmp, nft_lookup expr ..., method 2 will get the wrong
result in big-endian system, as 0~15 bits will always be zero.
For the similar reason, when loading an u16 value from the u32 data
register, we should use "*(u16 *) sreg;" instead of "(u16)*sreg;",
the 2nd method will get the wrong value in the big-endian system.
So introduce some wrapper functions to store/load an u8 or u16
integer to/from the u32 data register, and use them in the right
place.
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d5256083f6 ]
While implementing ipvlan l3 and l3s mode for kubernetes CNI plugin,
I ran into the issue that while l3 mode is working fine, l3s mode
does not have any connectivity to kube-apiserver and hence all pods
end up in Error state as well. The ipvlan master device sits on
top of a bond device and hostns traffic to kube-apiserver (also running
in hostns) is DNATed from 10.152.183.1:443 to 139.178.29.207:37573
where the latter is the address of the bond0. While in l3 mode, a
curl to https://10.152.183.1:443 or to https://139.178.29.207:37573
works fine from hostns, neither of them do in case of l3s. In the
latter only a curl to https://127.0.0.1:37573 appeared to work where
for local addresses of bond0 I saw kernel suddenly starting to emit
ARP requests to query HW address of bond0 which remained unanswered
and neighbor entries in INCOMPLETE state. These ARP requests only
happen while in l3s.
Debugging this further, I found the issue is that l3s mode is piggy-
backing on l3 master device, and in this case local routes are using
l3mdev_master_dev_rcu(dev) instead of net->loopback_dev as per commit
f5a0aab84b ("net: ipv4: dst for local input routes should use l3mdev
if relevant") and 5f02ce24c2 ("net: l3mdev: Allow the l3mdev to be
a loopback"). I found that reverting them back into using the
net->loopback_dev fixed ipvlan l3s connectivity and got everything
working for the CNI.
Now judging from 4fbae7d83c ("ipvlan: Introduce l3s mode") and the
l3mdev paper in [0] the only sole reason why ipvlan l3s is relying
on l3 master device is to get the l3mdev_ip_rcv() receive hook for
setting the dst entry of the input route without adding its own
ipvlan specific hacks into the receive path, however, any l3 domain
semantics beyond just that are breaking l3s operation. Note that
ipvlan also has the ability to dynamically switch its internal
operation from l3 to l3s for all ports via ipvlan_set_port_mode()
at runtime. In any case, l3 vs l3s soley distinguishes itself by
'de-confusing' netfilter through switching skb->dev to ipvlan slave
device late in NF_INET_LOCAL_IN before handing the skb to L4.
Minimal fix taken here is to add a IFF_L3MDEV_RX_HANDLER flag which,
if set from ipvlan setup, gets us only the wanted l3mdev_l3_rcv() hook
without any additional l3mdev semantics on top. This should also have
minimal impact since dev->priv_flags is already hot in cache. With
this set, l3s mode is working fine and I also get things like
masquerading pod traffic on the ipvlan master properly working.
[0] https://netdevconf.org/1.2/papers/ahern-what-is-l3mdev-paper.pdf
Fixes: f5a0aab84b ("net: ipv4: dst for local input routes should use l3mdev if relevant")
Fixes: 5f02ce24c2 ("net: l3mdev: Allow the l3mdev to be a loopback")
Fixes: 4fbae7d83c ("ipvlan: Introduce l3s mode")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Mahesh Bandewar <maheshb@google.com>
Cc: David Ahern <dsa@cumulusnetworks.com>
Cc: Florian Westphal <fw@strlen.de>
Cc: Martynas Pumputis <m@lambda.lt>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f97f4dd8b3 ]
IPv4 routing tables are flushed in two cases:
1. In response to events in the netdev and inetaddr notification chains
2. When a network namespace is being dismantled
In both cases only routes associated with a dead nexthop group are
flushed. However, a nexthop group will only be marked as dead in case it
is populated with actual nexthops using a nexthop device. This is not
the case when the route in question is an error route (e.g.,
'blackhole', 'unreachable').
Therefore, when a network namespace is being dismantled such routes are
not flushed and leaked [1].
To reproduce:
# ip netns add blue
# ip -n blue route add unreachable 192.0.2.0/24
# ip netns del blue
Fix this by not skipping error routes that are not marked with
RTNH_F_DEAD when flushing the routing tables.
To prevent the flushing of such routes in case #1, add a parameter to
fib_table_flush() that indicates if the table is flushed as part of
namespace dismantle or not.
Note that this problem does not exist in IPv6 since error routes are
associated with the loopback device.
[1]
unreferenced object 0xffff888066650338 (size 56):
comm "ip", pid 1206, jiffies 4294786063 (age 26.235s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 b0 1c 62 61 80 88 ff ff ..........ba....
e8 8b a1 64 80 88 ff ff 00 07 00 08 fe 00 00 00 ...d............
backtrace:
[<00000000856ed27d>] inet_rtm_newroute+0x129/0x220
[<00000000fcdfc00a>] rtnetlink_rcv_msg+0x397/0xa20
[<00000000cb85801a>] netlink_rcv_skb+0x132/0x380
[<00000000ebc991d2>] netlink_unicast+0x4c0/0x690
[<0000000014f62875>] netlink_sendmsg+0x929/0xe10
[<00000000bac9d967>] sock_sendmsg+0xc8/0x110
[<00000000223e6485>] ___sys_sendmsg+0x77a/0x8f0
[<000000002e94f880>] __sys_sendmsg+0xf7/0x250
[<00000000ccb1fa72>] do_syscall_64+0x14d/0x610
[<00000000ffbe3dae>] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[<000000003a8b605b>] 0xffffffffffffffff
unreferenced object 0xffff888061621c88 (size 48):
comm "ip", pid 1206, jiffies 4294786063 (age 26.235s)
hex dump (first 32 bytes):
6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
6b 6b 6b 6b 6b 6b 6b 6b d8 8e 26 5f 80 88 ff ff kkkkkkkk..&_....
backtrace:
[<00000000733609e3>] fib_table_insert+0x978/0x1500
[<00000000856ed27d>] inet_rtm_newroute+0x129/0x220
[<00000000fcdfc00a>] rtnetlink_rcv_msg+0x397/0xa20
[<00000000cb85801a>] netlink_rcv_skb+0x132/0x380
[<00000000ebc991d2>] netlink_unicast+0x4c0/0x690
[<0000000014f62875>] netlink_sendmsg+0x929/0xe10
[<00000000bac9d967>] sock_sendmsg+0xc8/0x110
[<00000000223e6485>] ___sys_sendmsg+0x77a/0x8f0
[<000000002e94f880>] __sys_sendmsg+0xf7/0x250
[<00000000ccb1fa72>] do_syscall_64+0x14d/0x610
[<00000000ffbe3dae>] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[<000000003a8b605b>] 0xffffffffffffffff
Fixes: 8cced9eff1 ("[NETNS]: Enable routing configuration in non-initial namespace.")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3a0ed3e961 ]
Al Viro mentioned (Message-ID
<20170626041334.GZ10672@ZenIV.linux.org.uk>)
that there is probably a race condition
lurking in accesses of sk_stamp on 32-bit machines.
sock->sk_stamp is of type ktime_t which is always an s64.
On a 32 bit architecture, we might run into situations of
unsafe access as the access to the field becomes non atomic.
Use seqlocks for synchronization.
This allows us to avoid using spinlocks for readers as
readers do not need mutual exclusion.
Another approach to solve this is to require sk_lock for all
modifications of the timestamps. The current approach allows
for timestamps to have their own lock: sk_stamp_lock.
This allows for the patch to not compete with already
existing critical sections, and side effects are limited
to the paths in the patch.
The addition of the new field maintains the data locality
optimizations from
commit 9115e8cd2a ("net: reorganize struct sock for better data
locality")
Note that all the instances of the sk_stamp accesses
are either through the ioctl or the syscall recvmsg.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e6ac64d4c4 ]
While skb_push() makes the kernel panic if the skb headroom is less than
the unaligned hardware header size, it will proceed normally in case we
copy more than that because of alignment, and we'll silently corrupt
adjacent slabs.
In the case fixed by the previous patch,
"ipv6: Check available headroom in ip6_xmit() even without options", we
end up in neigh_hh_output() with 14 bytes headroom, 14 bytes hardware
header and write 16 bytes, starting 2 bytes before the allocated buffer.
Always check we're not writing before skb->head and, if the headroom is
not enough, warn and drop the packet.
v2:
- instead of panicking with BUG_ON(), WARN_ON_ONCE() and drop the packet
(Eric Dumazet)
- if we avoid the panic, though, we need to explicitly check the headroom
before the memcpy(), otherwise we'll have corrupted slabs on a running
kernel, after we warn
- use __skb_push() instead of skb_push(), as the headroom check is
already implemented here explicitly (Eric Dumazet)
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch introduces several helper functions/macros that will be
used in the follow-up patch. No runtime changes yet.
The new logic (fully implemented in the second patch) is as follows:
* Nodes in the rb-tree will now contain not single fragments, but lists
of consecutive fragments ("runs").
* At each point in time, the current "active" run at the tail is
maintained/tracked. Fragments that arrive in-order, adjacent
to the previous tail fragment, are added to this tail run without
triggering the re-balancing of the rb-tree.
* If a fragment arrives out of order with the offset _before_ the tail run,
it is inserted into the rb-tree as a single fragment.
* If a fragment arrives after the current tail fragment (with a gap),
it starts a new "tail" run, as is inserted into the rb-tree
at the end as the head of the new run.
skb->cb is used to store additional information
needed here (suggested by Eric Dumazet).
Reported-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Peter Oskolkov <posk@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 353c9cb360)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(commit fa0f527358 upstream)
Similar to TCP OOO RX queue, it makes sense to use rb trees to store
IP fragments, so that OOO fragments are inserted faster.
Tested:
- a follow-up patch contains a rather comprehensive ip defrag
self-test (functional)
- ran neper `udp_stream -c -H <host> -F 100 -l 300 -T 20`:
netstat --statistics
Ip:
282078937 total packets received
0 forwarded
0 incoming packets discarded
946760 incoming packets delivered
18743456 requests sent out
101 fragments dropped after timeout
282077129 reassemblies required
944952 packets reassembled ok
262734239 packet reassembles failed
(The numbers/stats above are somewhat better re:
reassemblies vs a kernel without this patchset. More
comprehensive performance testing TBD).
Reported-by: Jann Horn <jannh@google.com>
Reported-by: Juha-Matti Tilli <juha-matti.tilli@iki.fi>
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Peter Oskolkov <posk@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Put the read-mostly fields in a separate cache line
at the beginning of struct netns_frags, to reduce
false sharing noticed in inet_frag_kill()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit c2615cf5a7)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some users are willing to provision huge amounts of memory to be able
to perform reassembly reasonnably well under pressure.
Current memory tracking is using one atomic_t and integers.
Switch to atomic_long_t so that 64bit arches can use more than 2GB,
without any cost for 32bit arches.
Note that this patch avoids an overflow error, if high_thresh was set
to ~2GB, since this test in inet_frag_alloc() was never true :
if (... || frag_mem_limit(nf) > nf->high_thresh)
Tested:
$ echo 16000000000 >/proc/sys/net/ipv4/ipfrag_high_thresh
<frag DDOS>
$ grep FRAG /proc/net/sockstat
FRAG: inuse 14705885 memory 16000002880
$ nstat -n ; sleep 1 ; nstat | grep Reas
IpReasmReqds 3317150 0.0
IpReasmFails 3317112 0.0
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 3e67f106f6)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This refactors ip_expire() since one indentation level is removed.
Note: in the future, we should try hard to avoid the skb_clone()
since this is a serious performance cost.
Under DDOS, the ICMP message wont be sent because of rate limits.
Fact that ip6_expire_frag_queue() does not use skb_clone() is
disturbing too. Presumably IPv6 should have the same
issue than the one we fixed in commit ec4fbd6475
("inet: frag: release spinlock before calling icmp_send()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 399d1404be)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove sum_frag_mem_limit(), ip_frag_mem() & ip6_frag_mem()
Also since we use rhashtable we can bring back the number of fragments
in "grep FRAG /proc/net/sockstat /proc/net/sockstat6" that was
removed in commit 434d305405 ("inet: frag: don't account number
of fragment queues")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 6befe4a78b)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some applications still rely on IP fragmentation, and to be fair linux
reassembly unit is not working under any serious load.
It uses static hash tables of 1024 buckets, and up to 128 items per bucket (!!!)
A work queue is supposed to garbage collect items when host is under memory
pressure, and doing a hash rebuild, changing seed used in hash computations.
This work queue blocks softirqs for up to 25 ms when doing a hash rebuild,
occurring every 5 seconds if host is under fire.
Then there is the problem of sharing this hash table for all netns.
It is time to switch to rhashtables, and allocate one of them per netns
to speedup netns dismantle, since this is a critical metric these days.
Lookup is now using RCU. A followup patch will even remove
the refcount hold/release left from prior implementation and save
a couple of atomic operations.
Before this patch, 16 cpus (16 RX queue NIC) could not handle more
than 1 Mpps frags DDOS.
After the patch, I reach 9 Mpps without any tuning, and can use up to 2GB
of storage for the fragments (exact number depends on frags being evicted
after timeout)
$ grep FRAG /proc/net/sockstat
FRAG: inuse 1966916 memory 2140004608
A followup patch will change the limits for 64bit arches.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Florian Westphal <fw@strlen.de>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Alexander Aring <alex.aring@gmail.com>
Cc: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 648700f76b)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In order to simplify the API, add a pointer to struct inet_frags.
This will allow us to make things less complex.
These functions no longer have a struct inet_frags parameter :
inet_frag_destroy(struct inet_frag_queue *q /*, struct inet_frags *f */)
inet_frag_put(struct inet_frag_queue *q /*, struct inet_frags *f */)
inet_frag_kill(struct inet_frag_queue *q /*, struct inet_frags *f */)
inet_frags_exit_net(struct netns_frags *nf /*, struct inet_frags *f */)
ip6_expire_frag_queue(struct net *net, struct frag_queue *fq)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 093ba72914)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We will soon initialize one rhashtable per struct netns_frags
in inet_frags_init_net().
This patch changes the return value to eventually propagate an
error.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 787bea7748)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2ab2ddd301 ]
Timer handlers do not imply rcu_read_lock(), so my recent fix
triggered a LOCKDEP warning when SYNACK is retransmit.
Lets add rcu_read_lock()/rcu_read_unlock() pairs around ireq->ireq_opt
usages instead of guessing what is done by callers, since it is
not worth the pain.
Get rid of ireq_opt_deref() helper since it hides the logic
without real benefit, since it is now a standard rcu_dereference().
Fixes: 1ad98e9d1b ("tcp/dccp: fix lockdep issue when SYN is backlogged")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1ad98e9d1b ]
In normal SYN processing, packets are handled without listener
lock and in RCU protected ingress path.
But syzkaller is known to be able to trick us and SYN
packets might be processed in process context, after being
queued into socket backlog.
In commit 06f877d613 ("tcp/dccp: fix other lockdep splats
accessing ireq_opt") I made a very stupid fix, that happened
to work mostly because of the regular path being RCU protected.
Really the thing protecting ireq->ireq_opt is RCU read lock,
and the pseudo request refcnt is not relevant.
This patch extends what I did in commit 449809a66c ("tcp/dccp:
block BH for SYN processing") by adding an extra rcu_read_{lock|unlock}
pair in the paths that might be taken when processing SYN from
socket backlog (thus possibly in process context)
Fixes: 06f877d613 ("tcp/dccp: fix other lockdep splats accessing ireq_opt")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit af7d6cce53 ]
Since commit 5aad1de5ea ("ipv4: use separate genid for next hop
exceptions"), exceptions get deprecated separately from cached
routes. In particular, administrative changes don't clear PMTU anymore.
As Stefano described in commit e9fa1495d7 ("ipv6: Reflect MTU changes
on PMTU of exceptions for MTU-less routes"), the PMTU discovered before
the local MTU change can become stale:
- if the local MTU is now lower than the PMTU, that PMTU is now
incorrect
- if the local MTU was the lowest value in the path, and is increased,
we might discover a higher PMTU
Similarly to what commit e9fa1495d7 did for IPv6, update PMTU in those
cases.
If the exception was locked, the discovered PMTU was smaller than the
minimal accepted PMTU. In that case, if the new local MTU is smaller
than the current PMTU, let PMTU discovery figure out if locking of the
exception is still needed.
To do this, we need to know the old link MTU in the NETDEV_CHANGEMTU
notifier. By the time the notifier is called, dev->mtu has been
changed. This patch adds the old MTU as additional information in the
notifier structure, and a new call_netdevice_notifiers_u32() function.
Fixes: 5aad1de5ea ("ipv4: use separate genid for next hop exceptions")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e285d5bfb7 upstream.
According to ETSI TS 102 622 specification chapter 4.4 pipe identifier
is 7 bits long which allows for 128 unique pipe IDs. Because
NFC_HCI_MAX_PIPES is used as the number of pipes supported and not
as the max pipe ID, its value should be 128 instead of 127.
nfc_hci_recv_from_llc extracts pipe ID from packet header using
NFC_HCI_FRAGMENT(0x7F) mask which allows for pipe ID value of 127.
Same happens when NCI_HCP_MSG_GET_PIPE() is being used. With
pipes array having only 127 elements and pipe ID of 127 the OOB memory
access will result.
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Allen Pais <allen.pais@oracle.com>
Cc: "David S. Miller" <davem@davemloft.net>
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a9ba23d48d ]
At present the ipv6_renew_options_kern() function ends up calling into
access_ok() which is problematic if done from inside an interrupt as
access_ok() calls WARN_ON_IN_IRQ() on some (all?) architectures
(x86-64 is affected). Example warning/backtrace is shown below:
WARNING: CPU: 1 PID: 3144 at lib/usercopy.c:11 _copy_from_user+0x85/0x90
...
Call Trace:
<IRQ>
ipv6_renew_option+0xb2/0xf0
ipv6_renew_options+0x26a/0x340
ipv6_renew_options_kern+0x2c/0x40
calipso_req_setattr+0x72/0xe0
netlbl_req_setattr+0x126/0x1b0
selinux_netlbl_inet_conn_request+0x80/0x100
selinux_inet_conn_request+0x6d/0xb0
security_inet_conn_request+0x32/0x50
tcp_conn_request+0x35f/0xe00
? __lock_acquire+0x250/0x16c0
? selinux_socket_sock_rcv_skb+0x1ae/0x210
? tcp_rcv_state_process+0x289/0x106b
tcp_rcv_state_process+0x289/0x106b
? tcp_v6_do_rcv+0x1a7/0x3c0
tcp_v6_do_rcv+0x1a7/0x3c0
tcp_v6_rcv+0xc82/0xcf0
ip6_input_finish+0x10d/0x690
ip6_input+0x45/0x1e0
? ip6_rcv_finish+0x1d0/0x1d0
ipv6_rcv+0x32b/0x880
? ip6_make_skb+0x1e0/0x1e0
__netif_receive_skb_core+0x6f2/0xdf0
? process_backlog+0x85/0x250
? process_backlog+0x85/0x250
? process_backlog+0xec/0x250
process_backlog+0xec/0x250
net_rx_action+0x153/0x480
__do_softirq+0xd9/0x4f7
do_softirq_own_stack+0x2a/0x40
</IRQ>
...
While not present in the backtrace, ipv6_renew_option() ends up calling
access_ok() via the following chain:
access_ok()
_copy_from_user()
copy_from_user()
ipv6_renew_option()
The fix presented in this patch is to perform the userspace copy
earlier in the call chain such that it is only called when the option
data is actually coming from userspace; that place is
do_ipv6_setsockopt(). Not only does this solve the problem seen in
the backtrace above, it also allows us to simplify the code quite a
bit by removing ipv6_renew_options_kern() completely. We also take
this opportunity to cleanup ipv6_renew_options()/ipv6_renew_option()
a small amount as well.
This patch is heavily based on a rough patch by Al Viro. I've taken
his original patch, converted a kmemdup() call in do_ipv6_setsockopt()
to a memdup_user() call, made better use of the e_inval jump target in
the same function, and cleaned up the use ipv6_renew_option() by
ipv6_renew_options().
CC: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9ce7bc036a ]
It is a waste of memory to use a full "struct netns_sysctl_ipv6"
while only one pointer is really used, considering netns_sysctl_ipv6
keeps growing.
Also, since "struct netns_frags" has cache line alignment,
it is better to move the frags_hdr pointer outside, otherwise
we spend a full cache line for this pointer.
This saves 192 bytes of memory per netns.
Fixes: c038a767cd ("ipv6: add a new namespace for nf_conntrack_reasm")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 455f05ecd2 ]
syzbot reported that we reinitialize an active delayed
work in vsock_stream_connect():
ODEBUG: init active (active state 0) object type: timer_list hint:
delayed_work_timer_fn+0x0/0x90 kernel/workqueue.c:1414
WARNING: CPU: 1 PID: 11518 at lib/debugobjects.c:329
debug_print_object+0x16a/0x210 lib/debugobjects.c:326
The pattern is apparently wrong, we should only initialize
the dealyed work once and could repeatly schedule it. So we
have to move out the initializations to allocation side.
And to avoid confusion, we can split the shared dwork
into two, instead of re-using the same one.
Fixes: d021c34405 ("VSOCK: Introduce VM Sockets")
Reported-by: <syzbot+8a9b1bd330476a4f3db6@syzkaller.appspotmail.com>
Cc: Andy king <acking@vmware.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0dcb82254d ]
llc_sap_put() decreases the refcnt before deleting sap
from the global list. Therefore, there is a chance
llc_sap_find() could find a sap with zero refcnt
in this global list.
Close this race condition by checking if refcnt is zero
or not in llc_sap_find(), if it is zero then it is being
removed so we can just treat it as gone.
Reported-by: <syzbot+278893f3f7803871f7ce@syzkaller.appspotmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9a9c9b51e5 ]
We want to add finer control of the number of ACK packets sent after
ECN events.
This patch is not changing current behavior, it only enables following
change.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a0496ef2c2 ]
Per DCTCP RFC8257 (Section 3.2) the ACK reflecting the CE status change
has to be sent immediately so the sender can respond quickly:
""" When receiving packets, the CE codepoint MUST be processed as follows:
1. If the CE codepoint is set and DCTCP.CE is false, set DCTCP.CE to
true and send an immediate ACK.
2. If the CE codepoint is not set and DCTCP.CE is true, set DCTCP.CE
to false and send an immediate ACK.
"""
Previously DCTCP implementation may continue to delay the ACK. This
patch fixes that to implement the RFC by forcing an immediate ACK.
Tested with this packetdrill script provided by Larry Brakmo
0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
0.000 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
0.000 setsockopt(3, SOL_TCP, TCP_CONGESTION, "dctcp", 5) = 0
0.000 bind(3, ..., ...) = 0
0.000 listen(3, 1) = 0
0.100 < [ect0] SEW 0:0(0) win 32792 <mss 1000,sackOK,nop,nop,nop,wscale 7>
0.100 > SE. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 8>
0.110 < [ect0] . 1:1(0) ack 1 win 257
0.200 accept(3, ..., ...) = 4
+0 setsockopt(4, SOL_SOCKET, SO_DEBUG, [1], 4) = 0
0.200 < [ect0] . 1:1001(1000) ack 1 win 257
0.200 > [ect01] . 1:1(0) ack 1001
0.200 write(4, ..., 1) = 1
0.200 > [ect01] P. 1:2(1) ack 1001
0.200 < [ect0] . 1001:2001(1000) ack 2 win 257
+0.005 < [ce] . 2001:3001(1000) ack 2 win 257
+0.000 > [ect01] . 2:2(0) ack 2001
// Previously the ACK below would be delayed by 40ms
+0.000 > [ect01] E. 2:2(0) ack 3001
+0.500 < F. 9501:9501(0) ack 4 win 257
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 27cde44a25 ]
Currently when a DCTCP receiver delays an ACK and receive a
data packet with a different CE mark from the previous one's, it
sends two immediate ACKs acking previous and latest sequences
respectly (for ECN accounting).
Previously sending the first ACK may mark off the delayed ACK timer
(tcp_event_ack_sent). This may subsequently prevent sending the
second ACK to acknowledge the latest sequence (tcp_ack_snd_check).
The culprit is that tcp_send_ack() assumes it always acknowleges
the latest sequence, which is not true for the first special ACK.
The fix is to not make the assumption in tcp_send_ack and check the
actual ack sequence before cancelling the delayed ACK. Further it's
safer to pass the ack sequence number as a local variable into
tcp_send_ack routine, instead of intercepting tp->rcv_nxt to avoid
future bugs like this.
Reported-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 169dc027fb ]
The rol32 call is currently rotating hash but the rol'd value is
being discarded. I believe the current code is incorrect and hash
should be assigned the rotated value returned from rol32.
Thanks to David Lebrun for spotting this.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In case of using BT_ERR and BT_INFO, convert to bt_dev_err and
bt_dev_info when possible. This allows for controller specific
reporting.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Change-Id: I3cd472bf3ce8e797b112c36227884ee2d80b6394
Signed-off-by: Victor Wan <victor.wan@amlogic.com>
Conflicts:
drivers/md/dm-bufio.c
drivers/media/dvb-core/dvb_frontend.c
drivers/usb/dwc3/core.c
drivers/usb/gadget/function/f_fs.c
Changes in 4.9.109
x86/fpu: Hard-disable lazy FPU mode
bonding: correctly update link status during mii-commit phase
bonding: fix active-backup transition
bonding: require speed/duplex only for 802.3ad, alb and tlb
nvme-pci: initialize queue memory before interrupts
af_key: Always verify length of provided sadb_key
x86/crypto, x86/fpu: Remove X86_FEATURE_EAGER_FPU #ifdef from the crc32c code
nvmet: Move serial number from controller to subsystem
nvmet: don't report 0-bytes in serial number
nvmet: don't overwrite identify sn/fr with 0-bytes
gpio: No NULL owner
KVM: x86: introduce linear_{read,write}_system
KVM: x86: pass kvm_vcpu to kvm_read_guest_virt and kvm_write_guest_virt_system
staging: android: ion: Switch to pr_warn_once in ion_buffer_destroy
usbip: vhci_sysfs: fix potential Spectre v1
usb-storage: Add support for FL_ALWAYS_SYNC flag in the UAS driver
usb-storage: Add compatibility quirk flags for G-Technologies G-Drive
usb: gadget: udc: renesas_usb3: disable the controller's irqs for reconnecting
serial: sh-sci: Stop using printk format %pCr
tty/serial: atmel: use port->name as name in request_irq()
serial: samsung: fix maxburst parameter for DMA transactions
serial: 8250: omap: Fix idling of clocks for unused uarts
vmw_balloon: fixing double free when batching mode is off
tty: pl011: Avoid spuriously stuck-off interrupts
kvm: x86: use correct privilege level for sgdt/sidt/fxsave/fxrstor access
Input: goodix - add new ACPI id for GPD Win 2 touch screen
Input: elan_i2c - add ELAN0612 (Lenovo v330 14IKB) ACPI ID
crypto: vmx - Remove overly verbose printk from AES init routines
crypto: omap-sham - fix memleak
perf: sync up x86/.../cpufeatures.h
Linux 4.9.109
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit ad729bc9ac upstream.
The patch c4adfc822b ("bonding: make speed, duplex setting consistent
with link state") puts the link state to down if
bond_update_speed_duplex() cannot retrieve speed and duplex settings.
Assumably the patch was written with 802.3ad mode in mind which relies
on link speed/duplex settings. For other modes like active-backup these
settings are not required. Thus, only for these other modes, this patch
reintroduces support for slaves that do not support reporting speed or
duplex such as wireless devices. This fixes the regression reported in
bug 196547 (https://bugzilla.kernel.org/show_bug.cgi?id=196547).
Fixes: c4adfc822b ("bonding: make speed, duplex setting consistent
with link state")
Signed-off-by: Andreas Born <futur.andy@googlemail.com>
Acked-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Nate Clark <nate@neworld.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Changes in 4.9.104
MIPS: c-r4k: Fix data corruption related to cache coherence
MIPS: ptrace: Expose FIR register through FP regset
MIPS: Fix ptrace(2) PTRACE_PEEKUSR and PTRACE_POKEUSR accesses to o32 FGRs
KVM: Fix spelling mistake: "cop_unsuable" -> "cop_unusable"
affs_lookup(): close a race with affs_remove_link()
aio: fix io_destroy(2) vs. lookup_ioctx() race
ALSA: timer: Fix pause event notification
do d_instantiate/unlock_new_inode combinations safely
mmc: sdhci-iproc: remove hard coded mmc cap 1.8v
mmc: sdhci-iproc: fix 32bit writes for TRANSFER_MODE register
libata: Blacklist some Sandisk SSDs for NCQ
libata: blacklist Micron 500IT SSD with MU01 firmware
xen-swiotlb: fix the check condition for xen_swiotlb_free_coherent
drm/vmwgfx: Fix 32-bit VMW_PORT_HB_[IN|OUT] macros
IB/hfi1: Use after free race condition in send context error path
Revert "ipc/shm: Fix shmat mmap nil-page protection"
ipc/shm: fix shmat() nil address after round-down when remapping
kasan: fix memory hotplug during boot
kernel/sys.c: fix potential Spectre v1 issue
kernel/signal.c: avoid undefined behaviour in kill_something_info
KVM/VMX: Expose SSBD properly to guests
KVM: s390: vsie: fix < 8k check for the itdba
KVM: x86: Update cpuid properly when CR4.OSXAVE or CR4.PKE is changed
kvm: x86: IA32_ARCH_CAPABILITIES is always supported
firewire-ohci: work around oversized DMA reads on JMicron controllers
x86/tsc: Allow TSC calibration without PIT
NFSv4: always set NFS_LOCK_LOST when a lock is lost.
ALSA: hda - Use IS_REACHABLE() for dependency on input
kvm: x86: fix KVM_XEN_HVM_CONFIG ioctl
netfilter: ipv6: nf_defrag: Pass on packets to stack per RFC2460
tracing/hrtimer: Fix tracing bugs by taking all clock bases and modes into account
PCI: Add function 1 DMA alias quirk for Marvell 9128
Input: psmouse - fix Synaptics detection when protocol is disabled
i40iw: Zero-out consumer key on allocate stag for FMR
tools lib traceevent: Simplify pointer print logic and fix %pF
perf callchain: Fix attr.sample_max_stack setting
tools lib traceevent: Fix get_field_str() for dynamic strings
perf record: Fix failed memory allocation for get_cpuid_str
iommu/vt-d: Use domain instead of cache fetching
dm thin: fix documentation relative to low water mark threshold
net: stmmac: dwmac-meson8b: fix setting the RGMII TX clock on Meson8b
net: stmmac: dwmac-meson8b: propagate rate changes to the parent clock
nfs: Do not convert nfs_idmap_cache_timeout to jiffies
watchdog: sp5100_tco: Fix watchdog disable bit
kconfig: Don't leak main menus during parsing
kconfig: Fix automatic menu creation mem leak
kconfig: Fix expr_free() E_NOT leak
mac80211_hwsim: fix possible memory leak in hwsim_new_radio_nl()
ipmi/powernv: Fix error return code in ipmi_powernv_probe()
Btrfs: set plug for fsync
btrfs: Fix out of bounds access in btrfs_search_slot
Btrfs: fix scrub to repair raid6 corruption
btrfs: fail mount when sb flag is not in BTRFS_SUPER_FLAG_SUPP
HID: roccat: prevent an out of bounds read in kovaplus_profile_activated()
fm10k: fix "failed to kill vid" message for VF
device property: Define type of PROPERTY_ENRTY_*() macros
jffs2: Fix use-after-free bug in jffs2_iget()'s error handling path
powerpc/numa: Use ibm,max-associativity-domains to discover possible nodes
powerpc/numa: Ensure nodes initialized for hotplug
RDMA/mlx5: Avoid memory leak in case of XRCD dealloc failure
ntb_transport: Fix bug with max_mw_size parameter
gianfar: prevent integer wrapping in the rx handler
tcp_nv: fix potential integer overflow in tcpnv_acked
kvm: Map PFN-type memory regions as writable (if possible)
ocfs2: return -EROFS to mount.ocfs2 if inode block is invalid
ocfs2/acl: use 'ip_xattr_sem' to protect getting extended attribute
ocfs2: return error when we attempt to access a dirty bh in jbd2
mm/mempolicy: fix the check of nodemask from user
mm/mempolicy: add nodes_empty check in SYSC_migrate_pages
asm-generic: provide generic_pmdp_establish()
sparc64: update pmdp_invalidate() to return old pmd value
mm: thp: use down_read_trylock() in khugepaged to avoid long block
mm: pin address_space before dereferencing it while isolating an LRU page
mm/fadvise: discard partial page if endbyte is also EOF
openvswitch: Remove padding from packet before L3+ conntrack processing
IB/ipoib: Fix for potential no-carrier state
drm/nouveau/pmu/fuc: don't use movw directly anymore
netfilter: ipv6: nf_defrag: Kill frag queue on RFC2460 failure
x86/power: Fix swsusp_arch_resume prototype
firmware: dmi_scan: Fix handling of empty DMI strings
ACPI: processor_perflib: Do not send _PPC change notification if not ready
ACPI / scan: Use acpi_bus_get_status() to initialize ACPI_TYPE_DEVICE devs
bpf: fix selftests/bpf test_kmod.sh failure when CONFIG_BPF_JIT_ALWAYS_ON=y
MIPS: generic: Fix machine compatible matching
MIPS: TXx9: use IS_BUILTIN() for CONFIG_LEDS_CLASS
xen-netfront: Fix race between device setup and open
xen/grant-table: Use put_page instead of free_page
RDS: IB: Fix null pointer issue
arm64: spinlock: Fix theoretical trylock() A-B-A with LSE atomics
proc: fix /proc/*/map_files lookup
cifs: silence compiler warnings showing up with gcc-8.0.0
bcache: properly set task state in bch_writeback_thread()
bcache: fix for allocator and register thread race
bcache: fix for data collapse after re-attaching an attached device
bcache: return attach error when no cache set exist
tools/libbpf: handle issues with bpf ELF objects containing .eh_frames
bpf: fix rlimit in reuseport net selftest
vfs/proc/kcore, x86/mm/kcore: Fix SMAP fault when dumping vsyscall user page
locking/qspinlock: Ensure node->count is updated before initialising node
irqchip/gic-v3: Ignore disabled ITS nodes
cpumask: Make for_each_cpu_wrap() available on UP as well
irqchip/gic-v3: Change pr_debug message to pr_devel
ARC: Fix malformed ARC_EMUL_UNALIGNED default
ptr_ring: prevent integer overflow when calculating size
libata: Fix compile warning with ATA_DEBUG enabled
selftests: pstore: Adding config fragment CONFIG_PSTORE_RAM=m
selftests: memfd: add config fragment for fuse
ARM: OMAP2+: timer: fix a kmemleak caused in omap_get_timer_dt
ARM: OMAP3: Fix prm wake interrupt for resume
ARM: OMAP1: clock: Fix debugfs_create_*() usage
ibmvnic: Free RX socket buffer in case of adapter error
iwlwifi: mvm: fix security bug in PN checking
iwlwifi: mvm: always init rs with 20mhz bandwidth rates
NFC: llcp: Limit size of SDP URI
rxrpc: Work around usercopy check
mac80211: round IEEE80211_TX_STATUS_HEADROOM up to multiple of 4
mac80211: fix a possible leak of station stats
mac80211: fix calling sleeping function in atomic context
mac80211: Do not disconnect on invalid operating class
md raid10: fix NULL deference in handle_write_completed()
drm/exynos: g2d: use monotonic timestamps
drm/exynos: fix comparison to bitshift when dealing with a mask
locking/xchg/alpha: Add unconditional memory barrier to cmpxchg()
md: raid5: avoid string overflow warning
kernel/relay.c: limit kmalloc size to KMALLOC_MAX_SIZE
powerpc/bpf/jit: Fix 32-bit JIT for seccomp_data access
s390/cio: fix ccw_device_start_timeout API
s390/cio: fix return code after missing interrupt
s390/cio: clear timer when terminating driver I/O
PKCS#7: fix direct verification of SignerInfo signature
ARM: OMAP: Fix dmtimer init for omap1
smsc75xx: fix smsc75xx_set_features()
regulatory: add NUL to request alpha2
integrity/security: fix digsig.c build error with header file
locking/xchg/alpha: Fix xchg() and cmpxchg() memory ordering bugs
x86/topology: Update the 'cpu cores' field in /proc/cpuinfo correctly across CPU hotplug operations
mac80211: drop frames with unexpected DS bits from fast-rx to slow path
arm64: fix unwind_frame() for filtered out fn for function graph tracing
macvlan: fix use-after-free in macvlan_common_newlink()
kvm: fix warning for CONFIG_HAVE_KVM_EVENTFD builds
fs: dcache: Avoid livelock between d_alloc_parallel and __d_add
fs: dcache: Use READ_ONCE when accessing i_dir_seq
md: fix a potential deadlock of raid5/raid10 reshape
md/raid1: fix NULL pointer dereference
batman-adv: fix packet checksum in receive path
batman-adv: invalidate checksum on fragment reassembly
netfilter: ebtables: convert BUG_ONs to WARN_ONs
batman-adv: Ignore invalid batadv_iv_gw during netlink send
batman-adv: Ignore invalid batadv_v_gw during netlink send
batman-adv: Fix netlink dumping of BLA claims
batman-adv: Fix netlink dumping of BLA backbones
nvme-pci: Fix nvme queue cleanup if IRQ setup fails
clocksource/drivers/fsl_ftm_timer: Fix error return checking
ceph: fix dentry leak when failing to init debugfs
ARM: orion5x: Revert commit 4904dbda41.
qrtr: add MODULE_ALIAS macro to smd
r8152: fix tx packets accounting
virtio-gpu: fix ioctl and expose the fixed status to userspace.
dmaengine: rcar-dmac: fix max_chunk_size for R-Car Gen3
bcache: fix kcrashes with fio in RAID5 backend dev
ip6_tunnel: fix IFLA_MTU ignored on NEWLINK
sit: fix IFLA_MTU ignored on NEWLINK
ARM: dts: NSP: Fix amount of RAM on BCM958625HR
powerpc/boot: Fix random libfdt related build errors
gianfar: Fix Rx byte accounting for ndev stats
net/tcp/illinois: replace broken algorithm reference link
nvmet: fix PSDT field check in command format
xen/pirq: fix error path cleanup when binding MSIs
drm/sun4i: Fix dclk_set_phase
Btrfs: send, fix issuing write op when processing hole in no data mode
selftests/powerpc: Skip the subpage_prot tests if the syscall is unavailable
KVM: PPC: Book3S HV: Fix VRMA initialization with 2MB or 1GB memory backing
iwlwifi: mvm: fix TX of CCMP 256
watchdog: f71808e_wdt: Fix magic close handling
watchdog: sbsa: use 32-bit read for WCV
batman-adv: Fix multicast packet loss with a single WANT_ALL_IPV4/6 flag
e1000e: Fix check_for_link return value with autoneg off
e1000e: allocate ring descriptors with dma_zalloc_coherent
ia64/err-inject: Use get_user_pages_fast()
RDMA/qedr: Fix kernel panic when running fio over NFSoRDMA
RDMA/qedr: Fix iWARP write and send with immediate
IB/mlx4: Fix corruption of RoCEv2 IPv4 GIDs
IB/mlx4: Include GID type when deleting GIDs from HW table under RoCE
IB/mlx5: Fix an error code in __mlx5_ib_modify_qp()
fbdev: Fixing arbitrary kernel leak in case FBIOGETCMAP_SPARC in sbusfb_ioctl_helper().
fsl/fman: avoid sleeping in atomic context while adding an address
net: qcom/emac: Use proper free methods during TX
net: smsc911x: Fix unload crash when link is up
IB/core: Fix possible crash to access NULL netdev
xen: xenbus: use put_device() instead of kfree()
arm64: Relax ARM_SMCCC_ARCH_WORKAROUND_1 discovery
dmaengine: mv_xor_v2: Fix clock resource by adding a register clock
netfilter: ebtables: fix erroneous reject of last rule
bnxt_en: Check valid VNIC ID in bnxt_hwrm_vnic_set_tpa().
workqueue: use put_device() instead of kfree()
ipv4: lock mtu in fnhe when received PMTU < net.ipv4.route.min_pmtu
sunvnet: does not support GSO for sctp
drm/imx: move arming of the vblank event to atomic_flush
net: Fix vlan untag for bridge and vlan_dev with reorder_hdr off
batman-adv: fix header size check in batadv_dbg_arp()
batman-adv: Fix skbuff rcsum on packet reroute
vti4: Don't count header length twice on tunnel setup
vti4: Don't override MTU passed on link creation via IFLA_MTU
perf/cgroup: Fix child event counting bug
brcmfmac: Fix check for ISO3166 code
kbuild: make scripts/adjust_autoksyms.sh robust against timestamp races
RDMA/ucma: Correct option size check using optlen
RDMA/qedr: fix QP's ack timeout configuration
RDMA/qedr: Fix rc initialization on CNQ allocation failure
mm/mempolicy.c: avoid use uninitialized preferred_node
mm, thp: do not cause memcg oom for thp
selftests: ftrace: Add probe event argument syntax testcase
selftests: ftrace: Add a testcase for string type with kprobe_event
selftests: ftrace: Add a testcase for probepoint
batman-adv: fix multicast-via-unicast transmission with AP isolation
batman-adv: fix packet loss for broadcasted DHCP packets to a server
ARM: 8748/1: mm: Define vdso_start, vdso_end as array
net: qmi_wwan: add BroadMobi BM806U 2020:2033
perf/x86/intel: Fix linear IP of PEBS real_ip on Haswell and later CPUs
llc: properly handle dev_queue_xmit() return value
builddeb: Fix header package regarding dtc source links
mm/kmemleak.c: wait for scan completion before disabling free
net: Fix untag for vlan packets without ethernet header
net: mvneta: fix enable of all initialized RXQs
sh: fix debug trap failure to process signals before return to user
nvme: don't send keep-alives to the discovery controller
x86/pgtable: Don't set huge PUD/PMD on non-leaf entries
x86/mm: Do not forbid _PAGE_RW before init for __ro_after_init
fs/proc/proc_sysctl.c: fix potential page fault while unregistering sysctl table
swap: divide-by-zero when zero length swap file on ssd
sr: get/drop reference to device in revalidate and check_events
Force log to disk before reading the AGF during a fstrim
cpufreq: CPPC: Initialize shared perf capabilities of CPUs
dp83640: Ensure against premature access to PHY registers after reset
mm/ksm: fix interaction with THP
mm: fix races between address_space dereference and free in page_evicatable
Btrfs: bail out on error during replay_dir_deletes
Btrfs: fix NULL pointer dereference in log_dir_items
btrfs: Fix possible softlock on single core machines
ocfs2/dlm: don't handle migrate lockres if already in shutdown
sched/rt: Fix rq->clock_update_flags < RQCF_ACT_SKIP warning
KVM: VMX: raise internal error for exception during invalid protected mode state
fscache: Fix hanging wait on page discarded by writeback
sparc64: Make atomic_xchg() an inline function rather than a macro.
net: bgmac: Fix endian access in bgmac_dma_tx_ring_free()
btrfs: tests/qgroup: Fix wrong tree backref level
Btrfs: fix copy_items() return value when logging an inode
btrfs: fix lockdep splat in btrfs_alloc_subvolume_writers
rxrpc: Fix Tx ring annotation after initial Tx failure
rxrpc: Don't treat call aborts as conn aborts
xen/acpi: off by one in read_acpi_id()
drivers: macintosh: rack-meter: really fix bogus memsets
ACPI: acpi_pad: Fix memory leak in power saving threads
powerpc/mpic: Check if cpu_possible() in mpic_physmask()
m68k: set dma and coherent masks for platform FEC ethernets
parisc/pci: Switch LBA PCI bus from Hard Fail to Soft Fail mode
hwmon: (nct6775) Fix writing pwmX_mode
powerpc/perf: Prevent kernel address leak to userspace via BHRB buffer
powerpc/perf: Fix kernel address leak via sampling registers
tools/thermal: tmon: fix for segfault
selftests: Print the test we're running to /dev/kmsg
net/mlx5: Protect from command bit overflow
ath10k: Fix kernel panic while using worker (ath10k_sta_rc_update_wk)
cxgb4: Setup FW queues before registering netdev
ima: Fallback to the builtin hash algorithm
virtio-net: Fix operstate for virtio when no VIRTIO_NET_F_STATUS
arm: dts: socfpga: fix GIC PPI warning
cpufreq: cppc_cpufreq: Fix cppc_cpufreq_init() failure path
zorro: Set up z->dev.dma_mask for the DMA API
bcache: quit dc->writeback_thread when BCACHE_DEV_DETACHING is set
ACPICA: Events: add a return on failure from acpi_hw_register_read
ACPICA: acpi: acpica: fix acpi operand cache leak in nseval.c
cxgb4: Fix queue free path of ULD drivers
i2c: mv64xxx: Apply errata delay only in standard mode
KVM: lapic: stop advertising DIRECTED_EOI when in-kernel IOAPIC is in use
perf top: Fix top.call-graph config option reading
perf stat: Fix core dump when flag T is used
IB/core: Honor port_num while resolving GID for IB link layer
regulator: gpio: Fix some error handling paths in 'gpio_regulator_probe()'
spi: bcm-qspi: fIX some error handling paths
MIPS: ath79: Fix AR724X_PLL_REG_PCIE_CONFIG offset
PCI: Restore config space on runtime resume despite being unbound
ipmi_ssif: Fix kernel panic at msg_done_handler
powerpc: Add missing prototype for arch_irq_work_raise()
f2fs: fix to check extent cache in f2fs_drop_extent_tree
perf/core: Fix perf_output_read_group()
drm/panel: simple: Fix the bus format for the Ontat panel
hwmon: (pmbus/max8688) Accept negative page register values
hwmon: (pmbus/adm1275) Accept negative page register values
perf/x86/intel: Properly save/restore the PMU state in the NMI handler
cdrom: do not call check_disk_change() inside cdrom_open()
perf/x86/intel: Fix large period handling on Broadwell CPUs
perf/x86/intel: Fix event update for auto-reload
arm64: dts: qcom: Fix SPI5 config on MSM8996
soc: qcom: wcnss_ctrl: Fix increment in NV upload
gfs2: Fix fallocate chunk size
x86/devicetree: Initialize device tree before using it
x86/devicetree: Fix device IRQ settings in DT
ALSA: vmaster: Propagate slave error
dmaengine: pl330: fix a race condition in case of threaded irqs
dmaengine: rcar-dmac: Check the done lists in rcar_dmac_chan_get_residue()
enic: enable rq before updating rq descriptors
hwrng: stm32 - add reset during probe
dmaengine: qcom: bam_dma: get num-channels and num-ees from dt
net: stmmac: ensure that the device has released ownership before reading data
net: stmmac: ensure that the MSS desc is the last desc to set the own bit
cpufreq: Reorder cpufreq_online() error code path
PCI: Add function 1 DMA alias quirk for Marvell 88SE9220
udf: Provide saner default for invalid uid / gid
ARM: dts: bcm283x: Fix probing of bcm2835-i2s
audit: return on memory error to avoid null pointer dereference
rcu: Call touch_nmi_watchdog() while printing stall warnings
pinctrl: sh-pfc: r8a7796: Fix MOD_SEL register pin assignment for SSI pins group
MIPS: Octeon: Fix logging messages with spurious periods after newlines
drm/rockchip: Respect page offset for PRIME mmap calls
x86/apic: Set up through-local-APIC mode on the boot CPU if 'noapic' specified
perf tests: Use arch__compare_symbol_names to compare symbols
perf report: Fix memory corruption in --branch-history mode --branch-history
selftests/net: fixes psock_fanout eBPF test case
netlabel: If PF_INET6, check sk_buff ip header version
regmap: Correct comparison in regmap_cached
ARM: dts: imx7d: cl-som-imx7: fix pinctrl_enet
ARM: dts: porter: Fix HDMI output routing
regulator: of: Add a missing 'of_node_put()' in an error handling path of 'of_regulator_match()'
pinctrl: msm: Use dynamic GPIO numbering
kdb: make "mdr" command repeat
Linux 4.9.104
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
[ Upstream commit b85ab56c3f ]
llc_conn_send_pdu() pushes the skb into write queue and
calls llc_conn_send_pdus() to flush them out. However, the
status of dev_queue_xmit() is not returned to caller,
in this case, llc_conn_state_process().
llc_conn_state_process() needs hold the skb no matter
success or failure, because it still uses it after that,
therefore we should hold skb before dev_queue_xmit() when
that skb is the one being processed by llc_conn_state_process().
For other callers, they can just pass NULL and ignore
the return value as they are.
Reported-by: Noam Rathaus <noamr@beyondsecurity.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d52e5a7e7c ]
Prior to the rework of PMTU information storage in commit
2c8cec5c10 ("ipv4: Cache learned PMTU information in inetpeer."),
when a PMTU event advertising a PMTU smaller than
net.ipv4.route.min_pmtu was received, we would disable setting the DF
flag on packets by locking the MTU metric, and set the PMTU to
net.ipv4.route.min_pmtu.
Since then, we don't disable DF, and set PMTU to
net.ipv4.route.min_pmtu, so the intermediate router that has this link
with a small MTU will have to drop the packets.
This patch reestablishes pre-2.6.39 behavior by splitting
rtable->rt_pmtu into a bitfield with rt_mtu_locked and rt_pmtu.
rt_mtu_locked indicates that we shouldn't set the DF bit on that path,
and is checked in ip_dont_fragment().
One possible workaround is to set net.ipv4.route.min_pmtu to a value low
enough to accommodate the lowest MTU encountered.
Fixes: 2c8cec5c10 ("ipv4: Cache learned PMTU information in inetpeer.")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 657308f73e ]
Similar to the ancient commit a5fe8e7695 ("regulatory: add NUL
to alpha2"), add another byte to alpha2 in the request struct so
that when we use nla_put_string(), we don't overrun anything.
Fixes: 73d54c9e74 ("cfg80211: add regulatory netlink multicast group")
Reported-by: Kees Cook <keescook@google.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 651b9920d7 ]
This ensures that mac80211 allocated management frames are properly
aligned, which makes copying them more efficient.
For instance, mt76 uses iowrite32_copy to copy beacon frames to beacon
template memory on the chip.
Misaligned 32-bit accesses cause CPU exceptions on MIPS and should be
avoided.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann