With the following config set:
CONFIG_DRM=m
CONFIG_DRM_PANEL=y
CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y
CONFIG_TYPEC_MUX_NB7VPQ904M=y
vmlinux fails on the following symbols:
ld.lld: error: undefined symbol: devm_drm_bridge_add
ld.lld: error: undefined symbol: devm_drm_of_get_bridge
Add dependendy on DRM || DRM=no since CONFIG_DRM dependency is optional
and guarded by:
IS_ENABLED(CONFIG_OF) && IS_ENABLED(CONFIG_DRM_PANEL_BRIDGE)
in the drive.
Also add "select DRM_PANEL_BRIDGE if DRM" to clarify DRM_PANEL_BRIDGE
is required if CONFIG_DRM is enabled.
Fixes: 88d8f3ac9c ("usb: typec: add support for the nb7vpq904m Type-C Linear Redriver")
Reported-by: Arnd Bergmann <arnd@kernel.org>
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Message-ID: <20230622-topic-sm8x50-upstream-redriver-config-fix-v1-1-005ab6f4d1f5@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In scenarios where pullup relies on resume (get sync) to initialize
the controller and set the run stop bit, then core_init is followed by
gadget_resume which will eventually set run stop bit.
But in cases where the core_init fails, the return value is not sent
back to udc appropriately. So according to UDC the controller has
started but in reality we never set the run stop bit.
On systems like Android, there are uevents sent to HAL depending on
whether the configfs_bind / configfs_disconnect were invoked. In the
above mentioned scnenario, if the core init fails, the run stop won't
be set and the cable plug-out won't result in generation of any
disconnect event and userspace would never get any uevent regarding
cable plug out and we never call pullup(0) again. Furthermore none of
the next Plug-In/Plug-Out's would be known to configfs.
Return back the appropriate result to UDC to let the userspace/
configfs know that the pullup failed so they can take appropriate
action.
Fixes: 77adb8bdf4 ("usb: dwc3: gadget: Allow runtime suspend if UDC unbinded")
Cc: stable <stable@kernel.org>
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Message-ID: <20230618120949.14868-1-quic_kriskura@quicinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan writes:
USB-serial updates for 6.5-rc1
Here are the USB-serial updates for 6.5-rc1, including:
- improved error handling for break signalling
- report to user space when a device does not support break signalling
Included are also some new modem device ids.
All have been in linux-next with no reported issues.
* tag 'usb-serial-6.5-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add LARA-R6 01B PIDs
USB: serial: report unsupported break signalling
USB: serial: cp210x: disable break signalling on CP2105 SCI
USB: serial: return errors from break handling
The new LARA-R6 product variant identified by the "01B" string can be
configured (by AT interface) in three different USB modes:
* Default mode (Vendor ID: 0x1546 Product ID: 0x1311) with 4 serial
interfaces
* RmNet mode (Vendor ID: 0x1546 Product ID: 0x1312) with 4 serial
interfaces and 1 RmNet virtual network interface
* CDC-ECM mode (Vendor ID: 0x1546 Product ID: 0x1313) with 4 serial
interface and 1 CDC-ECM virtual network interface
The first 4 interfaces of all the 3 USB configurations (default, RmNet,
CDC-ECM) are the same.
In default mode LARA-R6 01B exposes the following interfaces:
If 0: Diagnostic
If 1: AT parser
If 2: AT parser
If 3: AT parser/alternative functions
In RmNet mode LARA-R6 01B exposes the following interfaces:
If 0: Diagnostic
If 1: AT parser
If 2: AT parser
If 3: AT parser/alternative functions
If 4: RMNET interface
In CDC-ECM mode LARA-R6 01B exposes the following interfaces:
If 0: Diagnostic
If 1: AT parser
If 2: AT parser
If 3: AT parser/alternative functions
If 4: CDC-ECM interface
Signed-off-by: Davide Tronchin <davide.tronchin.94@gmail.com>
Link: https://lore.kernel.org/r/20230622092921.12651-1-davide.tronchin.94@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Mika writes:
thunderbolt: Changes for v6.5 merge window
This includes following Thunderbolt/USB4 changes for the v6.5 merge
window:
- Improve debug logging
- Rework for TMU and CL states handling
- Retimer access improvements
- Initial support for USB4 v2 features:
* 80G symmetric link support
* New notifications
* PCIe extended encapsulation
* enhanced uni-directional TMU mode
* CL2 link low power state
* DisplayPort 2.x tunneling
- Support for Intel Barlow Ridge Thunderbolt/USB4 controller
- Minor fixes and improvements.
All these have been in linux-next with no reported issues.
* tag 'thunderbolt-for-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: (55 commits)
thunderbolt: Add test case for 3 DisplayPort tunnels
thunderbolt: Add DisplayPort 2.x tunneling support
thunderbolt: Make bandwidth allocation mode function names consistent
thunderbolt: Enable CL2 low power state
thunderbolt: Add support for enhanced uni-directional TMU mode
thunderbolt: Increase NVM_MAX_SIZE to support Intel Barlow Ridge controller
thunderbolt: Move constants related to NVM into nvm.c
thunderbolt: Limit Intel Barlow Ridge USB3 bandwidth
thunderbolt: Add Intel Barlow Ridge PCI ID
thunderbolt: Fix PCIe adapter capability length for USB4 v2 routers
thunderbolt: Fix DisplayPort IN adapter capability length for USB4 v2 routers
thunderbolt: Add two additional double words for adapters TMU for USB4 v2 routers
thunderbolt: Enable USB4 v2 PCIe TLP/DLLP extended encapsulation
thunderbolt: Announce USB4 v2 connection manager support
thunderbolt: Reset USB4 v2 host router
thunderbolt: Add the new USB4 v2 notification types
thunderbolt: Add support for USB4 v2 80 Gb/s link
thunderbolt: Identify USB4 v2 routers
thunderbolt: Do not touch lane 1 adapter path config space
thunderbolt: Ignore data CRC mismatch for USB4 routers
...
The hibernation feature enabled for Xilinx Versal NET SoC in DWC3 IP.
As the DWC3 IP supports the hibernation feature, to handle the wakeup
or hibernation interrupt, add host mode "wakeup" interrupt-names
optional property in the binding schema to capture remote-wakeup and
connect/ disconnect event in the hibernation state and increased maxItems
to 4 for the interrupts and interrupt-names property.
We have a dedicated IRQ line specifically for the hibernation feature.
When the "wakeup" IRQ line is triggered, it initiates a hibernation
interrupt, causing the system to wake up from the hibernation state.
Signed-off-by: Piyush Mehta <piyush.mehta@amd.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230619105032.2888128-1-piyush.mehta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Intel Barlow Ridge Thunderbolt controller has 3 DP IN adapters. This
allows 3 simultaneus DisplayPort tunnels through either one or two USB4
downstream ports (in any possible configuration). Add test case for
this.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
This adds support for the UHBR (Ultra High Bit Rate) bandwidths
introduced with DisplayPort 2.0 (and refined in 2.1). These can go up to
80 Gbit/s and their support is represent in additional bits in the DP IN
capability.
This updates the DisplayPort tunneling to support these new rates too.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Make sure the DisplayPort bandwidth allocation mode function names are
consistent with the existing ones, such as USB3.
No functional changes.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
For USB4 v2 routers we can also enable CL2 which allows better power
savings and thermal management than CL0s and CL1.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
This is new TMU mode introduced with the USB4 v2. This mode is simpler
than the existing ones and allows all CL states as well. Enable this for
all links where both side routers are v2 and keep the existing
functionality for the v1 and earlier links.
Currently only support the MedRes rate. We can add the HiFi rate later
too if it turns out to be useful.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Intel Barlow Ridge discrete USB4 controller has larger NOR Flash, hence
increase NVM_MAX_SIZE to support it.
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Move constants related to NVM into nvm.c to make the code cleaner. Use a
separate constant for USB4_DATA_DWORDS in usb4.c.
No functional changes.
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Intel Barlow Ridge discrete USB4 host router has the same limitation as
the previous generations so make sure the USB3 bandwidth limitation
quirk is applied to Barlow Ridge too.
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Intel Barlow Ridge is the first USB4 v2 controller from Intel. The
controller exposes standard USB4 PCI class ID in typical configurations,
however there is a way to configure it so that it uses a special class
ID to allow using s different driver than the Windows inbox one. For
this reason add the Barlow Ridge PCI ID to the Linux driver too so that
the driver can attach regardless of the class ID.
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
For USB4 v2 routers, the PCIe adapter capability length is longer.
Display the correct capability length in the debugfs register dump.
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
For USB4 v2 routers, the DisplayPort IN adapter capability length is
longer. Display the correct capability length in the debugfs register
dump.
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
For USB4 v2 routers, the adapters's TMU capability has two additional
double words. Include them in the debugfs register dump.
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
USB4 v2 spec introduces modified encapsulation of PCIe TLP and DLLP
packets. This improves the PCIe tunneled traffic usage by reducing
overhead. Enable this if both sides of the link support it.
Signed-off-by: Gil Fine <gil.fine@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Program the CMUV (Connection Manager USB4 Version) field for USB4 v2 and
v1 routers according to the spec.
Signed-off-by: Gil Fine <gil.fine@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
USB4 v2 added a bit that can be used to reset the host router so we use
this to trigger reset when the driver probes. This will reset the
already connected topology as well but doing this simplifies things a
lot if for instance the link is already set to asymmetric. We also add
a module parameter to prevent this in case of problems.
While there rename the REG_HOP_COUNT to REG_CAPS to match the USB4 spec
naming better.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
USB4 v2 spec adds a bunch of new notifications that the connection
manager can use instead of polling. While we do not use these yet we
need to ack the ones routers expect to be acked.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
USB4 v2 bumps the per-lane speed up to 40 Gb/s. Also the lanes are
always bonded which gives 80 Gb/s symmetric link (and 120/40 Gb/s
asymmetric). This updates the speed and width of routers and XDomain
connections to support the Gen 4 link. For now we keep the link as is
even if it is already asymmetric.
While there make tb_port_set_link_width() static.
Signed-off-by: Gil Fine <gil.fine@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Add a new function usb4_switch_version() that can be used to figure out
the spec version of the router and make tb_switch_is_usb4() to use it as
well. Update the uevent accordingly.
Signed-off-by: Gil Fine <gil.fine@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
It is not required to be implemented at all because USB4 does not use
lane 1 for tunneling except when aggregated with lane 0. For this reason
do not try to read the path config space of USB4 lane 1 adapters.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
This is also something not always updated after the DROM contents itself
so issue warning but continue parsing it as we do for pre-USB4 DROMs
too.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Add support for the ON Semiconductor NB7VPQ904M Type-C USB SuperSpeed
and DisplayPort ALT Mode Linear Redriver chip found on some devices
with a Type-C port.
The redriver compensates ultra High-Speeed DisplayPort and USB
Super Speed signal integrity losses mainly due to PCB & transmission
cables.
The redriver doesn't support SuperSpeed lines swapping, but
can support Type-C SBU lines swapping.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Message-ID: <20230601-topic-sm8x50-upstream-redriver-v4-2-91d5820f3a03@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For some reason the include/uapi/linux/usb/ directory is missing in the
USB SUBSYSTEM entry, so get_maintainer will not know to cc: the proper
mailing lists. Fix this up by adding an entry for this directory.
Message-ID: <20230615094306.2072827-2-gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB PHY DPDM wakeup bit is enabled by default, when USB wakeup
is not required(/sys/.../wakeup is disabled), this bit should be
disabled, otherwise we will have unexpected wakeup if do USB device
connect/disconnect while system sleep.
This bit can be enabled for both host and device mode.
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Message-ID: <20230517081907.3410465-3-xu.yang_2@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
