[ Upstream commit 3e38f946062b4845961ab86b726651b4457b2af8 ]
If an input changes state during wake-up and is used as an interrupt
source, the IRQ handler reads the volatile input register to clear the
interrupt mask and deassert the IRQ line. However, the IRQ handler is
triggered before access to the register is granted, causing the read
operation to fail.
As a result, the IRQ handler enters a loop, repeatedly printing the
"failed reading register" message, until `pca953x_resume()` is eventually
called, which restores the driver context and enables access to
registers.
Fix by disabling the IRQ line before entering suspend mode, and
re-enabling it after the driver context is restored in `pca953x_resume()`.
An IRQ can be disabled with disable_irq() and still wake the system as
long as the IRQ has wake enabled, so the wake-up functionality is
preserved.
Fixes: b765743005 ("gpio: pca953x: Restore registers after suspend/resume cycle")
Cc: stable@vger.kernel.org
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20250512095441.31645-1-francesco@dolcini.it
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8e471b784a720f6f34f9fb449ba0744359dcaccb ]
Use macros defined in linux/cleanup.h to automate resource lifetime
control in gpio-pca953x.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Stable-dep-of: 3e38f946062b ("gpio: pca953x: fix IRQ storm on system wake up")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ec5bde62019b0a5300c67bd81b9864a8ea12274e ]
Split regcache handling to the respective helpers. It will allow to
have further refactoring with ease.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Stable-dep-of: 3e38f946062b ("gpio: pca953x: fix IRQ storm on system wake up")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c20a395f9b ]
Do not imply that some of the generic headers may be always included.
Instead, include explicitly what we are direct user of.
While at it, sort headers alphabetically.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Stable-dep-of: 3e38f946062b ("gpio: pca953x: fix IRQ storm on system wake up")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 4aaffc85751da5722e858e4333e8cf0aa4b6c78f upstream.
Set the s3/s0ix and s4 flags in the pm notifier so that we can skip
the resource evictions properly in pm prepare based on whether
we are suspending or hibernating. Drop the eviction as processes
are not frozen at this time, we we can end up getting stuck trying
to evict VRAM while applications continue to submit work which
causes the buffers to get pulled back into VRAM.
v2: Move suspend flags out of pm notifier (Mario)
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4178
Fixes: 2965e6355dcd ("drm/amd: Add Suspend/Hibernate notification callback support")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 06f2dcc241e7e5c681f81fbc46cacdf4bfd7d6d7)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 32ce3bb57b6b402de2aec1012511e7ac4e7449dc upstream.
dev_get_drvdata() gets used to acquire the pointer to cqspi and the SPI
controller. Neither embed the other; this lead to memory corruption.
On a given platform (Mobileye EyeQ5) the memory corruption is hidden
inside cqspi->f_pdata. Also, this uninitialised memory is used as a
mutex (ctlr->bus_lock_mutex) by spi_controller_suspend().
Fixes: 2087e85bb6 ("spi: cadence-quadspi: fix suspend-resume implementations")
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://msgid.link/r/20240222-cdns-qspi-pm-fix-v4-1-6b6af8bcbf59@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Zhaoyang Li <lizy04@hust.edu.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fc1092f51567277509563800a3c56732070b6aa4 upstream.
KMSAN reported uninit-value access in __ip_make_skb() [1]. __ip_make_skb()
tests HDRINCL to know if the skb has icmphdr. However, HDRINCL can cause a
race condition. If calling setsockopt(2) with IP_HDRINCL changes HDRINCL
while __ip_make_skb() is running, the function will access icmphdr in the
skb even if it is not included. This causes the issue reported by KMSAN.
Check FLOWI_FLAG_KNOWN_NH on fl4->flowi4_flags instead of testing HDRINCL
on the socket.
Also, fl4->fl4_icmp_type and fl4->fl4_icmp_code are not initialized. These
are union in struct flowi4 and are implicitly initialized by
flowi4_init_output(), but we should not rely on specific union layout.
Initialize these explicitly in raw_sendmsg().
[1]
BUG: KMSAN: uninit-value in __ip_make_skb+0x2b74/0x2d20 net/ipv4/ip_output.c:1481
__ip_make_skb+0x2b74/0x2d20 net/ipv4/ip_output.c:1481
ip_finish_skb include/net/ip.h:243 [inline]
ip_push_pending_frames+0x4c/0x5c0 net/ipv4/ip_output.c:1508
raw_sendmsg+0x2381/0x2690 net/ipv4/raw.c:654
inet_sendmsg+0x27b/0x2a0 net/ipv4/af_inet.c:851
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x274/0x3c0 net/socket.c:745
__sys_sendto+0x62c/0x7b0 net/socket.c:2191
__do_sys_sendto net/socket.c:2203 [inline]
__se_sys_sendto net/socket.c:2199 [inline]
__x64_sys_sendto+0x130/0x200 net/socket.c:2199
do_syscall_64+0xd8/0x1f0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x6d/0x75
Uninit was created at:
slab_post_alloc_hook mm/slub.c:3804 [inline]
slab_alloc_node mm/slub.c:3845 [inline]
kmem_cache_alloc_node+0x5f6/0xc50 mm/slub.c:3888
kmalloc_reserve+0x13c/0x4a0 net/core/skbuff.c:577
__alloc_skb+0x35a/0x7c0 net/core/skbuff.c:668
alloc_skb include/linux/skbuff.h:1318 [inline]
__ip_append_data+0x49ab/0x68c0 net/ipv4/ip_output.c:1128
ip_append_data+0x1e7/0x260 net/ipv4/ip_output.c:1365
raw_sendmsg+0x22b1/0x2690 net/ipv4/raw.c:648
inet_sendmsg+0x27b/0x2a0 net/ipv4/af_inet.c:851
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x274/0x3c0 net/socket.c:745
__sys_sendto+0x62c/0x7b0 net/socket.c:2191
__do_sys_sendto net/socket.c:2203 [inline]
__se_sys_sendto net/socket.c:2199 [inline]
__x64_sys_sendto+0x130/0x200 net/socket.c:2199
do_syscall_64+0xd8/0x1f0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x6d/0x75
CPU: 1 PID: 15709 Comm: syz-executor.7 Not tainted 6.8.0-11567-gb3603fcb79b1 #25
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-1.fc39 04/01/2014
Fixes: 99e5acae19 ("ipv4: Fix potential uninit variable access bug in __ip_make_skb()")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Link: https://lore.kernel.org/r/20240430123945.2057348-1-syoshida@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Zhaoyang Li <lizy04@hust.edu.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4e13d3a9c25b7080f8a619f961e943fe08c2672c upstream.
As it was done in commit fc1092f51567 ("ipv4: Fix uninit-value access in
__ip_make_skb()") for IPv4, check FLOWI_FLAG_KNOWN_NH on fl6->flowi6_flags
instead of testing HDRINCL on the socket to avoid a race condition which
causes uninit-value access.
Fixes: ea30388bae ("ipv6: Fix an uninit variable access bug in __ip6_make_skb()")
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Zhaoyang Li <lizy04@hust.edu.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3051a77a09dfe3022aa012071346937fdf059033 upstream.
The MTU setting at the time an XDP multi-buffer is attached
determines whether the aggregation ring will be used and the
rx_skb_func handler. This is done in bnxt_set_rx_skb_mode().
If the MTU is later changed, the aggregation ring setting may need
to be changed and it may become out-of-sync with the settings
initially done in bnxt_set_rx_skb_mode(). This may result in
random memory corruption and crashes as the HW may DMA data larger
than the allocated buffer size, such as:
BUG: kernel NULL pointer dereference, address: 00000000000003c0
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 17 PID: 0 Comm: swapper/17 Kdump: loaded Tainted: G S OE 6.1.0-226bf9805506 #1
Hardware name: Wiwynn Delta Lake PVT BZA.02601.0150/Delta Lake-Class1, BIOS F0E_3A12 08/26/2021
RIP: 0010:bnxt_rx_pkt+0xe97/0x1ae0 [bnxt_en]
Code: 8b 95 70 ff ff ff 4c 8b 9d 48 ff ff ff 66 41 89 87 b4 00 00 00 e9 0b f7 ff ff 0f b7 43 0a 49 8b 95 a8 04 00 00 25 ff 0f 00 00 <0f> b7 14 42 48 c1 e2 06 49 03 95 a0 04 00 00 0f b6 42 33f
RSP: 0018:ffffa19f40cc0d18 EFLAGS: 00010202
RAX: 00000000000001e0 RBX: ffff8e2c805c6100 RCX: 00000000000007ff
RDX: 0000000000000000 RSI: ffff8e2c271ab990 RDI: ffff8e2c84f12380
RBP: ffffa19f40cc0e48 R08: 000000000001000d R09: 974ea2fcddfa4cbf
R10: 0000000000000000 R11: ffffa19f40cc0ff8 R12: ffff8e2c94b58980
R13: ffff8e2c952d6600 R14: 0000000000000016 R15: ffff8e2c271ab990
FS: 0000000000000000(0000) GS:ffff8e3b3f840000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000003c0 CR3: 0000000e8580a004 CR4: 00000000007706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<IRQ>
__bnxt_poll_work+0x1c2/0x3e0 [bnxt_en]
To address the issue, we now call bnxt_set_rx_skb_mode() within
bnxt_change_mtu() to properly set the AGG rings configuration and
update rx_skb_func based on the new MTU value.
Additionally, BNXT_FLAG_NO_AGG_RINGS is cleared at the beginning of
bnxt_set_rx_skb_mode() to make sure it gets set or cleared based on
the current MTU.
Fixes: 08450ea98a ("bnxt_en: Fix max_mtu setting for multi-buf XDP")
Co-developed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Shravya KN <shravya.k-n@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Zhaoyang Li <lizy04@hust.edu.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dd410d784402c5775f66faf8b624e85e41c38aaf upstream.
Wakeup for IRQ1 should be disabled only in cases where i8042 had
actually enabled it, otherwise "wake_depth" for this IRQ will try to
drop below zero and there will be an unpleasant WARN() logged:
kernel: atkbd serio0: Disabling IRQ1 wakeup source to avoid platform firmware bug
kernel: ------------[ cut here ]------------
kernel: Unbalanced IRQ 1 wake disable
kernel: WARNING: CPU: 10 PID: 6431 at kernel/irq/manage.c:920 irq_set_irq_wake+0x147/0x1a0
The PMC driver uses DEFINE_SIMPLE_DEV_PM_OPS() to define its dev_pm_ops
which sets amd_pmc_suspend_handler() to the .suspend, .freeze, and
.poweroff handlers. i8042_pm_suspend(), however, is only set as
the .suspend handler.
Fix the issue by call PMC suspend handler only from the same set of
dev_pm_ops handlers as i8042_pm_suspend(), which currently means just
the .suspend handler.
To reproduce this issue try hibernating (S4) the machine after a fresh boot
without putting it into s2idle first.
Fixes: 8e60615e89 ("platform/x86/amd: pmc: Disable IRQ1 wakeup for RN/CZN")
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Link: https://lore.kernel.org/r/c8f28c002ca3c66fbeeb850904a1f43118e17200.1736184606.git.mail@maciej.szmigiero.name
[ij: edited the commit message.]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Zhaoyang Li <lizy04@hust.edu.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dc7eb8755797ed41a0d1b5c0c39df3c8f401b3d9 upstream.
When sme_alloc() is called with existing storage and we are not flushing we
will always allocate new storage, both leaking the existing storage and
corrupting the state. Fix this by separating the checks for flushing and
for existing storage as we do for SVE.
Callers that reallocate (eg, due to changing the vector length) should
call sme_free() themselves.
Fixes: 5d0a8d2fba ("arm64/ptrace: Ensure that SME is set up for target when writing SSVE state")
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240115-arm64-sme-flush-v1-1-7472bd3459b7@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Zhaoyang Li <lizy04@hust.edu.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b04df3da1b5c6f6dc7cdccc37941740c078c4043 upstream.
nf_tables_chain_destroy can sleep, it can't be used from call_rcu
callbacks.
Moreover, nf_tables_rule_release() is only safe for error unwinding,
while transaction mutex is held and the to-be-desroyed rule was not
exposed to either dataplane or dumps, as it deactives+frees without
the required synchronize_rcu() in-between.
nft_rule_expr_deactivate() callbacks will change ->use counters
of other chains/sets, see e.g. nft_lookup .deactivate callback, these
must be serialized via transaction mutex.
Also add a few lockdep asserts to make this more explicit.
Calling synchronize_rcu() isn't ideal, but fixing this without is hard
and way more intrusive. As-is, we can get:
WARNING: .. net/netfilter/nf_tables_api.c:5515 nft_set_destroy+0x..
Workqueue: events nf_tables_trans_destroy_work
RIP: 0010:nft_set_destroy+0x3fe/0x5c0
Call Trace:
<TASK>
nf_tables_trans_destroy_work+0x6b7/0xad0
process_one_work+0x64a/0xce0
worker_thread+0x613/0x10d0
In case the synchronize_rcu becomes an issue, we can explore alternatives.
One way would be to allocate nft_trans_rule objects + one nft_trans_chain
object, deactivate the rules + the chain and then defer the freeing to the
nft destroy workqueue. We'd still need to keep the synchronize_rcu path as
a fallback to handle -ENOMEM corner cases though.
Reported-by: syzbot+b26935466701e56cfdc2@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/67478d92.050a0220.253251.0062.GAE@google.com/T/
Fixes: c03d278fdf35 ("netfilter: nf_tables: wait for rcu grace period on net_device removal")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c03d278fdf35e73dd0ec543b9b556876b9d9a8dc upstream.
8c873e2199 ("netfilter: core: free hooks with call_rcu") removed
synchronize_net() call when unregistering basechain hook, however,
net_device removal event handler for the NFPROTO_NETDEV was not updated
to wait for RCU grace period.
Note that 835b803377 ("netfilter: nf_tables_netdev: unregister hooks
on net_device removal") does not remove basechain rules on device
removal, I was hinted to remove rules on net_device removal later, see
5ebe0b0eec ("netfilter: nf_tables: destroy basechain and rules on
netdevice removal").
Although NETDEV_UNREGISTER event is guaranteed to be handled after
synchronize_net() call, this path needs to wait for rcu grace period via
rcu callback to release basechain hooks if netns is alive because an
ongoing netlink dump could be in progress (sockets hold a reference on
the netns).
Note that nf_tables_pre_exit_net() unregisters and releases basechain
hooks but it is possible to see NETDEV_UNREGISTER at a later stage in
the netns exit path, eg. veth peer device in another netns:
cleanup_net()
default_device_exit_batch()
unregister_netdevice_many_notify()
notifier_call_chain()
nf_tables_netdev_event()
__nft_release_basechain()
In this particular case, same rule of thumb applies: if netns is alive,
then wait for rcu grace period because netlink dump in the other netns
could be in progress. Otherwise, if the other netns is going away then
no netlink dump can be in progress and basechain hooks can be released
inmediately.
While at it, turn WARN_ON() into WARN_ON_ONCE() for the basechain
validation, which should not ever happen.
Fixes: 835b803377 ("netfilter: nf_tables_netdev: unregister hooks on net_device removal")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8965d42bcf54d42cbc72fe34a9d0ec3f8527debd upstream.
It would be better to not store nft_ctx inside nft_trans object,
the netlink ctx strucutre is huge and most of its information is
never needed in places that use trans->ctx.
Avoid/reduce its usage if possible, no runtime behaviour change
intended.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Stable-dep-of: c03d278fdf35 ("netfilter: nf_tables: wait for rcu grace period on net_device removal")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 28cb13f29faf6290597b24b728dc3100c019356f upstream.
Instead of doing a BUG_ON() handle the error by returning -EUCLEAN,
aborting the transaction and logging an error message.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[Minor conflict resolved due to code context change.]
Signed-off-by: Jianqi Ren <jianqi.ren.cn@windriver.com>
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e67e0eb6a98b261caf45048f9eb95fd7609289c0 upstream.
LoongArch's toolchain may change the default code model from normal to
medium. This is unnecessary for kernel, and generates some relocations
which cannot be handled by the module loader. So explicitly specify the
code model to normal in Makefile (for Rust 'normal' is 'small').
Cc: stable@vger.kernel.org
Tested-by: Haiyong Sun <sunhaiyong@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a552e2ef5fd1a6c78267cd4ec5a9b49aa11bbb1c upstream.
When BPF_TRAMP_F_CALL_ORIG is enabled, the address of a bpf_tramp_image
struct on the stack is passed during the size calculation pass and
an address on the heap is passed during code generation. This may
cause a heap buffer overflow if the heap address is tagged because
emit_a64_mov_i64() will emit longer code than it did during the size
calculation pass. The same problem could occur without tag-based
KASAN if one of the 16-bit words of the stack address happened to
be all-ones during the size calculation pass. Fix the problem by
assuming the worst case (4 instructions) when calculating the size
of the bpf_tramp_image address emission.
Fixes: 19d3c179a377 ("bpf, arm64: Fix trampoline for BPF_TRAMP_F_CALL_ORIG")
Signed-off-by: Peter Collingbourne <pcc@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://linux-review.googlesource.com/id/I1496f2bc24fba7a1d492e16e2b94cf43714f2d3c
Link: https://lore.kernel.org/bpf/20241018221644.3240898-1-pcc@google.com
[Minor context change fixed.]
Signed-off-by: Bin Lan <bin.lan.cn@windriver.com>
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 19d3c179a37730caf600a97fed3794feac2b197b upstream.
When BPF_TRAMP_F_CALL_ORIG is set, the trampoline calls
__bpf_tramp_enter() and __bpf_tramp_exit() functions, passing them
the struct bpf_tramp_image *im pointer as an argument in R0.
The trampoline generation code uses emit_addr_mov_i64() to emit
instructions for moving the bpf_tramp_image address into R0, but
emit_addr_mov_i64() assumes the address to be in the vmalloc() space
and uses only 48 bits. Because bpf_tramp_image is allocated using
kzalloc(), its address can use more than 48-bits, in this case the
trampoline will pass an invalid address to __bpf_tramp_enter/exit()
causing a kernel crash.
Fix this by using emit_a64_mov_i64() in place of emit_addr_mov_i64()
as it can work with addresses that are greater than 48-bits.
Fixes: efc9909fdc ("bpf, arm64: Add bpf trampoline for arm64")
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Closes: https://lore.kernel.org/all/SJ0PR15MB461564D3F7E7A763498CA6A8CBDB2@SJ0PR15MB4615.namprd15.prod.outlook.com/
Link: https://lore.kernel.org/bpf/20240711151838.43469-1-puranjay@kernel.org
[Minor context change fixed.]
Signed-off-by: Bin Lan <bin.lan.cn@windriver.com>
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f754f27e98f88428aaf6be6e00f5cbce97f62d4b upstream.
In sparse vmemmap model, the virtual address of vmemmap is calculated as:
((struct page *)VMEMMAP_START - (phys_ram_base >> PAGE_SHIFT)).
And the struct page's va can be calculated with an offset:
(vmemmap + (pfn)).
However, when initializing struct pages, kernel actually starts from the
first page from the same section that phys_ram_base belongs to. If the
first page's physical address is not (phys_ram_base >> PAGE_SHIFT), then
we get an va below VMEMMAP_START when calculating va for it's struct page.
For example, if phys_ram_base starts from 0x82000000 with pfn 0x82000, the
first page in the same section is actually pfn 0x80000. During
init_unavailable_range(), we will initialize struct page for pfn 0x80000
with virtual address ((struct page *)VMEMMAP_START - 0x2000), which is
below VMEMMAP_START as well as PCI_IO_END.
This commit fixes this bug by introducing a new variable
'vmemmap_start_pfn' which is aligned with memory section size and using
it to calculate vmemmap address instead of phys_ram_base.
Fixes: a11dd49dcb93 ("riscv: Sparse-Memory/vmemmap out-of-bounds fix")
Signed-off-by: Xu Lu <luxu.kernel@bytedance.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20241209122617.53341-1-luxu.kernel@bytedance.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Zhaoyang Li <lizy04@hust.edu.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ab00ddd802f80e31fc9639c652d736fe3913feae upstream.
When running mm selftest to verify mm patches, 'compaction_test' case
failed on an x86 server with 1TB memory. And the root cause is that it
has too much free memory than what the test supports.
The test case tries to allocate 100000 huge pages, which is about 200 GB
for that x86 server, and when it succeeds, it expects it's large than 1/3
of 80% of the free memory in system. This logic only works for platform
with 750 GB ( 200 / (1/3) / 80% ) or less free memory, and may raise false
alarm for others.
Fix it by changing the fixed page number to self-adjustable number
according to the real number of free memory.
Link: https://lkml.kernel.org/r/20250423103645.2758-1-feng.tang@linux.alibaba.com
Fixes: bd67d5c15c ("Test compaction of mlocked memory")
Signed-off-by: Feng Tang <feng.tang@linux.alibaba.com>
Acked-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang@inux.alibaba.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Sri Jayaramappa <sjayaram@akamai.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 165376f6b23e9a779850e750fb2eb06622e5a531 upstream.
The DisplayPort driver's sysfs nodes may be present to the userspace before
typec_altmode_set_drvdata() completes in dp_altmode_probe. This means that
a sysfs read can trigger a NULL pointer error by deferencing dp->hpd in
hpd_show or dp->lock in pin_assignment_show, as dev_get_drvdata() returns
NULL in those cases.
Remove manual sysfs node creation in favor of adding attribute group as
default for devices bound to the driver. The ATTRIBUTE_GROUPS() macro is
not used here otherwise the path to the sysfs nodes is no longer compliant
with the ABI.
Fixes: 0e3bb7d689 ("usb: typec: Add driver for DisplayPort alternate mode")
Cc: stable@vger.kernel.org
Signed-off-by: RD Babiera <rdbabiera@google.com>
Link: https://lore.kernel.org/r/20240229001101.3889432-2-rdbabiera@google.com
[Minor conflict resolved due to code context change.]
Signed-off-by: Jianqi Ren <jianqi.ren.cn@windriver.com>
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 364618c89d4c57c85e5fc51a2446cd939bf57802 upstream.
This patch introduces the ucsi_con_mutex_lock / ucsi_con_mutex_unlock
functions to the UCSI driver. ucsi_con_mutex_lock ensures the connector
mutex is only locked if a connection is established and the partner pointer
is valid. This resolves a deadlock scenario where
ucsi_displayport_remove_partner holds con->mutex waiting for
dp_altmode_work to complete while dp_altmode_work attempts to acquire it.
Cc: stable <stable@kernel.org>
Fixes: af8622f6a5 ("usb: typec: ucsi: Support for DisplayPort alt mode")
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250424084429.3220757-2-akuchynski@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8ca9590c39b69b55a8de63d2b21b0d44f523b43a upstream.
Currently, a local dma_cap_mask_t variable is used to store device
cap_mask within udma_of_xlate(). However, the DMA_PRIVATE flag in
the device cap_mask can get cleared when the last channel is released.
This can happen right after storing the cap_mask locally in
udma_of_xlate(), and subsequent dma_request_channel() can fail due to
mismatch in the cap_mask. Fix this by removing the local dma_cap_mask_t
variable and directly using the one from the dma_device structure.
Fixes: 25dcb5dd7b ("dmaengine: ti: New driver for K3 UDMA")
Cc: stable@vger.kernel.org
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Signed-off-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
Link: https://lore.kernel.org/r/20250417075521.623651-1-y-abhilashchandra@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6b3ab7f2cbfaeb6580709cd8ef4d72cfd01bfde4 upstream.
After a recent change [1] in clang's randstruct implementation to
randomize structures that only contain function pointers, there is an
error because qede_ll_ops get randomized but does not use a designated
initializer for the first member:
drivers/net/ethernet/qlogic/qede/qede_main.c:206:2: error: a randomized struct can only be initialized with a designated initializer
206 | {
| ^
Explicitly initialize the common member using a designated initializer
to fix the build.
Cc: stable@vger.kernel.org
Fixes: 035f7f87b7 ("randstruct: Enable Clang support")
Link: 04364fb888 [1]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20250507-qede-fix-clang-randstruct-v1-1-5ccc15626fba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 78ab4be549533432d97ea8989d2f00b508fa68d8 upstream.
A warning on driver removal started occurring after commit 9dd05df8403b
("net: warn if NAPI instance wasn't shut down"). Disable tx napi before
deleting it in mt76_dma_cleanup().
WARNING: CPU: 4 PID: 18828 at net/core/dev.c:7288 __netif_napi_del_locked+0xf0/0x100
CPU: 4 UID: 0 PID: 18828 Comm: modprobe Not tainted 6.15.0-rc4 #4 PREEMPT(lazy)
Hardware name: ASUS System Product Name/PRIME X670E-PRO WIFI, BIOS 3035 09/05/2024
RIP: 0010:__netif_napi_del_locked+0xf0/0x100
Call Trace:
<TASK>
mt76_dma_cleanup+0x54/0x2f0 [mt76]
mt7921_pci_remove+0xd5/0x190 [mt7921e]
pci_device_remove+0x47/0xc0
device_release_driver_internal+0x19e/0x200
driver_detach+0x48/0x90
bus_remove_driver+0x6d/0xf0
pci_unregister_driver+0x2e/0xb0
__do_sys_delete_module.isra.0+0x197/0x2e0
do_syscall_64+0x7b/0x160
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Tested with mt7921e but the same pattern can be actually applied to other
mt76 drivers calling mt76_dma_cleanup() during removal. Tx napi is enabled
in their *_dma_init() functions and only toggled off and on again inside
their suspend/resume/reset paths. So it should be okay to disable tx
napi in such a generic way.
Found by Linux Verification Center (linuxtesting.org).
Fixes: 2ac515a5d7 ("mt76: mt76x02: use napi polling for tx cleanup")
Cc: stable@vger.kernel.org
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Tested-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250506115540.19045-1-pchelkin@ispras.ru
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1fe4a44b7fa3955bcb7b4067c07b778fe90d8ee7 upstream.
The response buffer for the CREATE request handled by smb311_posix_mkdir()
is leaked on the error path (goto err_free_rsp_buf) because the structure
pointer *rsp passed to free_rsp_buf() is not assigned until *after* the
error condition is checked.
As *rsp is initialised to NULL, free_rsp_buf() becomes a no-op and the leak
is instead reported by __kmem_cache_shutdown() upon subsequent rmmod of
cifs.ko if (and only if) the error path has been hit.
Pass rsp_iov.iov_base to free_rsp_buf() instead, similar to the code in
other functions in smb2pdu.c for which *rsp is assigned late.
Cc: stable@vger.kernel.org
Signed-off-by: Jethro Donaldson <devel@jro.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e8007fad5457ea547ca63bb011fdb03213571c7e upstream.
The REPORT ZONES buffer size is currently limited by the HBA's maximum
segment count to ensure the buffer can be mapped. However, the block
layer further limits the number of iovec entries to 1024 when allocating
a bio.
To avoid allocation of buffers too large to be mapped, further restrict
the maximum buffer size to BIO_MAX_INLINE_VECS.
Replace the UIO_MAXIOV symbolic name with the more contextually
appropriate BIO_MAX_INLINE_VECS.
Fixes: b091ac6168 ("sd_zbc: Fix report zones buffer allocation")
Cc: stable@vger.kernel.org
Signed-off-by: Steve Siwinski <ssiwinski@atto.com>
Link: https://lore.kernel.org/r/20250508200122.243129-1-ssiwinski@atto.com
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 54c4c58713aaff76c2422ff5750e557ab3b100d7 upstream.
It has been observed on the Renesas RZ/G3S SoC that unbinding and binding
the PHY driver leads to role autodetection failures. This issue occurs when
PHY 3 is the first initialized PHY. PHY 3 does not have an interrupt
associated with the USB2_INT_ENABLE register (as
rcar_gen3_int_enable[3] = 0). As a result, rcar_gen3_init_otg() is called
to initialize OTG without enabling PHY interrupts.
To resolve this, add rcar_gen3_is_any_otg_rphy_initialized() and call it in
role_store(), role_show(), and rcar_gen3_init_otg(). At the same time,
rcar_gen3_init_otg() is only called when initialization for a PHY with
interrupt bits is in progress. As a result, the
struct rcar_gen3_phy::otg_initialized is no longer needed.
Fixes: 549b6b55b0 ("phy: renesas: rcar-gen3-usb2: enable/disable independent irqs")
Cc: stable@vger.kernel.org
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/r/20250507125032.565017-2-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b2ea5f49580c0762d17d80d8083cb89bc3acf74f upstream.
If device_add() fails, do not use device_unregister() for error
handling. device_unregister() consists two functions: device_del() and
put_device(). device_unregister() should only be called after
device_add() succeeded because device_del() undoes what device_add()
does if successful. Change device_unregister() to put_device() call
before returning from the function.
As comment of device_add() says, 'if device_add() succeeds, you should
call device_del() when you want to get rid of it. If device_add() has
not succeeded, use only put_device() to drop the reference count'.
Found by code review.
Cc: stable@vger.kernel.org
Fixes: 53d2a715c2 ("phy: Add Tegra XUSB pad controller support")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20250303072739.3874987-1-make24@iscas.ac.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1b0c192c92ea1fe2dcb178f84adf15fe37c3e7c8 upstream.
When using trace_array_printk() on a created instance, the correct
function to use to initialize it is:
trace_array_init_printk()
Not
trace_printk_init_buffer()
The former is a proper function to use, the latter is for initializing
trace_printk() and causes the NOTICE banner to be displayed.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Divya Indi <divya.indi@oracle.com>
Link: https://lore.kernel.org/20250509152657.0f6744d9@gandalf.local.home
Fixes: 89ed42495e ("tracing: Sample module to demonstrate kernel access to Ftrace instances.")
Fixes: 38ce2a9e33 ("tracing: Add trace_array_init_printk() to initialize instance trace_printk() buffers")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e333332657f615ac2b55aa35565c4a882018bbe9 upstream.
When using the stacktrace trigger command to trace syscalls, the
preemption count was consistently reported as 1 when the system call
event itself had 0 (".").
For example:
root@ubuntu22-vm:/sys/kernel/tracing/events/syscalls/sys_enter_read
$ echo stacktrace > trigger
$ echo 1 > enable
sshd-416 [002] ..... 232.864910: sys_read(fd: a, buf: 556b1f3221d0, count: 8000)
sshd-416 [002] ...1. 232.864913: <stack trace>
=> ftrace_syscall_enter
=> syscall_trace_enter
=> do_syscall_64
=> entry_SYSCALL_64_after_hwframe
The root cause is that the trace framework disables preemption in __DO_TRACE before
invoking the trigger callback.
Use the tracing_gen_ctx_dec() that will accommodate for the increase of
the preemption count in __DO_TRACE when calling the callback. The result
is the accurate reporting of:
sshd-410 [004] ..... 210.117660: sys_read(fd: 4, buf: 559b725ba130, count: 40000)
sshd-410 [004] ..... 210.117662: <stack trace>
=> ftrace_syscall_enter
=> syscall_trace_enter
=> do_syscall_64
=> entry_SYSCALL_64_after_hwframe
Cc: stable@vger.kernel.org
Fixes: ce33c845b0 ("tracing: Dump stacktrace trigger to the corresponding instance")
Link: https://lore.kernel.org/20250512094246.1167956-1-dolinux.peng@gmail.com
Signed-off-by: pengdonglin <dolinux.peng@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
