[ Upstream commit 4c16e1cadcbcaf3c82d5fc310fbd34d0f5d0db7c ]
In the smb2_send_interim_resp(), if ksmbd_alloc_work_struct()
fails to allocate a node, it returns a NULL pointer to the
in_work pointer. This can lead to an illegal memory write of
in_work->response_buf when allocate_interim_rsp_buf() attempts
to perform a kzalloc() on it.
To address this issue, incorporating a check for the return
value of ksmbd_alloc_work_struct() ensures that the function
returns immediately upon allocation failure, thereby preventing
the aforementioned illegal memory access.
Fixes: 041bba4414 ("ksmbd: fix wrong interim response on compound")
Signed-off-by: Wentao Liang <liangwentao@iscas.ac.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0d68b55887cedc7487036ed34cb4c2097c4228f1 ]
Fix dp mode valid issue to avoid abnormal display of limit state.
After DP passes link training, it can express the lane count of the
current link status is good. Calculate the maximum bandwidth supported
by DP using the current lane count.
The color format will select the best one based on the bandwidth
requirements of the current timing mode. If the current timing mode
uses RGB and meets the DP link bandwidth requirements, RGB will be used.
If the timing mode uses RGB but does not meet the DP link bandwidthi
requirements, it will continue to check whether YUV422 meets
the DP link bandwidth.
FEC overhead is approximately 2.4% from DP 1.4a spec 2.2.1.4.2.
The down-spread amplitude shall either be disabled (0.0%) or up
to 0.5% from 1.4a 3.5.2.6. Add up to approximately 3% total overhead.
Because rate is already divided by 10,
mode->clock does not need to be multiplied by 10.
Fixes: f70ac097a2 ("drm/mediatek: Add MT8195 Embedded DisplayPort driver")
Signed-off-by: Liankun Yang <liankun.yang@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20241025083036.8829-3-liankun.yang@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 924d66011f2401a4145e2e814842c5c4572e439f ]
The PHY portion of the mediatek hdmi driver was originally part of
the driver it self and later split out into drivers/phy, which a
'select' to keep the prior behavior.
However, this leads to build failures when the PHY driver cannot
be built:
WARNING: unmet direct dependencies detected for PHY_MTK_HDMI
Depends on [n]: (ARCH_MEDIATEK || COMPILE_TEST [=y]) && COMMON_CLK [=y] && OF [=y] && REGULATOR [=n]
Selected by [m]:
- DRM_MEDIATEK_HDMI [=m] && HAS_IOMEM [=y] && DRM [=m] && DRM_MEDIATEK [=m]
ERROR: modpost: "devm_regulator_register" [drivers/phy/mediatek/phy-mtk-hdmi-drv.ko] undefined!
ERROR: modpost: "rdev_get_drvdata" [drivers/phy/mediatek/phy-mtk-hdmi-drv.ko] undefined!
The best option here is to just not select the phy driver and leave that
up to the defconfig. Do the same for the other PHY and memory drivers
selected here as well for consistency.
Fixes: a481bf2f0c ("drm/mediatek: Separate mtk_hdmi_phy to an independent module")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20241218085837.2670434-1-arnd@kernel.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 737d4d91d35b5f7fa5bb442651472277318b0bfd ]
Even though we fixed a logic error in the commit cited below, syzbot
still managed to trigger an underflow of the per-host bulk flow
counters, leading to an out of bounds memory access.
To avoid any such logic errors causing out of bounds memory accesses,
this commit factors out all accesses to the per-host bulk flow counters
to a series of helpers that perform bounds-checking before any
increments and decrements. This also has the benefit of improving
readability by moving the conditional checks for the flow mode into
these helpers, instead of having them spread out throughout the
code (which was the cause of the original logic error).
As part of this change, the flow quantum calculation is consolidated
into a helper function, which means that the dithering applied to the
ost load scaling is now applied both in the DRR rotation and when a
sparse flow's quantum is first initiated. The only user-visible effect
of this is that the maximum packet size that can be sent while a flow
stays sparse will now vary with +/- one byte in some cases. This should
not make a noticeable difference in practice, and thus it's not worth
complicating the code to preserve the old behaviour.
Fixes: 546ea84d07e3 ("sched: sch_cake: fix bulk flow accounting logic for host fairness")
Reported-by: syzbot+f63600d288bfb7057424@syzkaller.appspotmail.com
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Dave Taht <dave.taht@gmail.com>
Link: https://patch.msgid.link/20250107120105.70685-1-toke@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b541ba7d1f5a5b7b3e2e22dc9e40e18a7d6dbc13 ]
Use INT_MAX as maximum size for the conntrack hashtable. Otherwise, it
is possible to hit WARN_ON_ONCE in __kvmalloc_node_noprof() when
resizing hashtable because __GFP_NOWARN is unset. See:
0708a0afe2 ("mm: Consider __GFP_NOWARN flag for oversized kvmalloc() calls")
Note: hashtable resize is only possible from init_netns.
Fixes: 9cc1c73ad6 ("netfilter: conntrack: avoid integer overflow when resizing")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 13210fc63f353fe78584048079343413a3cdf819 ]
All these cases cause imbalance between BIND and UNBIND calls:
- Delete an interface from a flowtable with multiple interfaces
- Add a (device to a) flowtable with --check flag
- Delete a netns containing a flowtable
- In an interactive nft session, create a table with owner flag and
flowtable inside, then quit.
Fix it by calling FLOW_BLOCK_UNBIND when unregistering hooks, then
remove late FLOW_BLOCK_UNBIND call when destroying flowtable.
Fixes: ff4bf2f42a ("netfilter: nf_tables: add nft_unregister_flowtable_hook()")
Reported-by: Phil Sutter <phil@nwl.cc>
Tested-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 6ca445d8af0ed5950ebf899415fd6bfcd7d9d7a3 upstream.
Commit c97bf629963e ("riscv: Fix text patching when IPI are used")
converted ftrace_make_nop() to use patch_insn_write() which does not
emit any icache flush relying entirely on __ftrace_modify_code() to do
that.
But we missed that ftrace_make_nop() was called very early directly when
converting mcount calls into nops (actually on riscv it converts 2B nops
emitted by the compiler into 4B nops).
This caused crashes on multiple HW as reported by Conor and Björn since
the booting core could have half-patched instructions in its icache
which would trigger an illegal instruction trap: fix this by emitting a
local flush icache when early patching nops.
Fixes: c97bf629963e ("riscv: Fix text patching when IPI are used")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reported-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20240523115134.70380-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8023dd2204254a70887f5ee58d914bf70a060b9d ]
This fixes the apparent controller hang issue seen during stress test
where the host sends a truncated payload, followed by HCI commands. The
controller treats these HCI commands as a part of previously truncated
payload, leading to command timeouts.
Adding a serdev_device_wait_until_sent() call after
serdev_device_write_buf() fixed the issue.
Fixes: 689ca16e52 ("Bluetooth: NXP: Add protocol support for NXP Bluetooth chipsets")
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a182d9c84f9c52fb5db895ecceeee8b3a1bf661e ]
Add Device with LE type requires updating resolving/accept list which
requires quite a number of commands to complete and each of them may
fail, so instead of pretending it would always work this checks the
return of hci_update_passive_scan_sync which indicates if everything
worked as intended.
Fixes: e8907f7654 ("Bluetooth: hci_sync: Make use of hci_cmd_sync_queue set 3")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c2994b008492db033d40bd767be1620229a3035e ]
This fixes errors such as the following when Own address type is set to
Random Address but it has not been programmed yet due to either be
advertising or connecting:
< HCI Command: LE Set Exte.. (0x08|0x0041) plen 13
Own address type: Random (0x03)
Filter policy: Ignore not in accept list (0x01)
PHYs: 0x05
Entry 0: LE 1M
Type: Passive (0x00)
Interval: 60.000 msec (0x0060)
Window: 30.000 msec (0x0030)
Entry 1: LE Coded
Type: Passive (0x00)
Interval: 180.000 msec (0x0120)
Window: 90.000 msec (0x0090)
> HCI Event: Command Complete (0x0e) plen 4
LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Exten.. (0x08|0x0042) plen 6
Extended scan: Enabled (0x01)
Filter duplicates: Enabled (0x01)
Duration: 0 msec (0x0000)
Period: 0.00 sec (0x0000)
> HCI Event: Command Complete (0x0e) plen 4
LE Set Extended Scan Enable (0x08|0x0042) ncmd 1
Status: Invalid HCI Command Parameters (0x12)
Fixes: c45074d68a ("Bluetooth: Fix not generating RPA when required")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit db78475ba0d3c66d430f7ded2388cc041078a542 ]
Commit f85949f982 ("xdp: add xdp_set_features_flag utility routine")
added routines to inform the core about XDP flag changes.
GVE support was added around the same time and missed using them.
GVE only changes the flags on error recover or resume.
Presumably the flags may change during resume if VM migrated.
User would not get the notification and upper devices would
not get a chance to recalculate their flags.
Fixes: 75eaae158b ("gve: Add XDP DROP and TX support for GQI-QPL format")
Reviewed-By: Jeroen de Borst <jeroendb@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250106180210.1861784-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b341ca51d2679829d26a3f6a4aa9aee9abd94f92 ]
We've noticed that NFS can hang when using RPC over TLS on an unstable
connection, and investigation shows that the RPC layer is stuck in a tight
loop attempting to transmit, but forever getting -EBADMSG back from the
underlying network. The loop begins when tcp_sendmsg_locked() returns
-EPIPE to tls_tx_records(), but that error is converted to -EBADMSG when
calling the socket's error reporting handler.
Instead of converting errors from tcp_sendmsg_locked(), let's pass them
along in this path. The RPC layer handles -EPIPE by reconnecting the
transport, which prevents the endless attempts to transmit on a broken
connection.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Fixes: a42055e8d2 ("net/tls: Add support for async encryption of records for performance")
Link: https://patch.msgid.link/9594185559881679d81f071b181a10eb07cd079f.1736004079.git.bcodding@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd2776e39c2a82ef4681d02678bb77b3d41e79be ]
When booting with a dock connected, the igc driver may get stuck for ~40
seconds if PCIe link is lost during initialization.
This happens because the driver access device after EECD register reads
return all F's, indicating failed reads. Consequently, hw->hw_addr is set
to NULL, which impacts subsequent rd32() reads. This leads to the driver
hanging in igc_get_hw_semaphore_i225(), as the invalid hw->hw_addr
prevents retrieving the expected value.
To address this, a validation check and a corresponding return value
catch is added for the EECD register read result. If all F's are
returned, indicating PCIe link loss, the driver will return -ENXIO
immediately. This avoids the 40-second hang and significantly improves
boot time when using a dock with an igc NIC.
Log before the patch:
[ 0.911913] igc 0000:70:00.0: enabling device (0000 -> 0002)
[ 0.912386] igc 0000:70:00.0: PTM enabled, 4ns granularity
[ 1.571098] igc 0000:70:00.0 (unnamed net_device) (uninitialized): PCIe link lost, device now detached
[ 43.449095] igc_get_hw_semaphore_i225: igc 0000:70:00.0 (unnamed net_device) (uninitialized): Driver can't access device - SMBI bit is set.
[ 43.449186] igc 0000:70:00.0: probe with driver igc failed with error -13
[ 46.345701] igc 0000:70:00.0: enabling device (0000 -> 0002)
[ 46.345777] igc 0000:70:00.0: PTM enabled, 4ns granularity
Log after the patch:
[ 1.031000] igc 0000:70:00.0: enabling device (0000 -> 0002)
[ 1.032097] igc 0000:70:00.0: PTM enabled, 4ns granularity
[ 1.642291] igc 0000:70:00.0 (unnamed net_device) (uninitialized): PCIe link lost, device now detached
[ 5.480490] igc 0000:70:00.0: enabling device (0000 -> 0002)
[ 5.480516] igc 0000:70:00.0: PTM enabled, 4ns granularity
Fixes: ab40561268 ("igc: Add NVM support")
Cc: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Signed-off-by: En-Wei Wu <en-wei.wu@canonical.com>
Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a8e0c7a6800dc466ac815264c16971b9adf7ffbd ]
Refactor the igc driver to use FIELD_GET() for mask and shift reads,
which reduces lines of code and adds clarity of intent.
This code was generated by the following coccinelle/spatch script and
then manually repaired in a later patch.
@get@
constant shift,mask;
type T;
expression a;
@@
-((T)((a) & mask) >> shift)
+FIELD_GET(mask, a)
and applied via:
spatch --sp-file field_prep.cocci --in-place --dir \
drivers/net/ethernet/intel/
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Stable-dep-of: bd2776e39c2a ("igc: return early when failing to read EECD register")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6c5b989116083a98f45aada548ff54e7a83a9c2d ]
ptp4l application reports too high offset when ran on E823 device
with a 100GB/s link. Those values cannot go under 100ns, like in a
working case when using 100 GB/s cable.
This is due to incorrect frequency settings on the PHY clocks for
100 GB/s speed. Changes are introduced to align with the internal
hardware documentation, and correctly initialize frequency in PHY
clocks with the frequency values that are in our HW spec.
To reproduce the issue run ptp4l as a Time Receiver on E823 device,
and observe the offset, which will never approach values seen
in the PTP working case.
Reproduction output:
ptp4l -i enp137s0f3 -m -2 -s -f /etc/ptp4l_8275.conf
ptp4l[5278.775]: master offset 12470 s2 freq +41288 path delay -3002
ptp4l[5278.837]: master offset 10525 s2 freq +39202 path delay -3002
ptp4l[5278.900]: master offset -24840 s2 freq -20130 path delay -3002
ptp4l[5278.963]: master offset 10597 s2 freq +37908 path delay -3002
ptp4l[5279.025]: master offset 8883 s2 freq +36031 path delay -3002
ptp4l[5279.088]: master offset 7267 s2 freq +34151 path delay -3002
ptp4l[5279.150]: master offset 5771 s2 freq +32316 path delay -3002
ptp4l[5279.213]: master offset 4388 s2 freq +30526 path delay -3002
ptp4l[5279.275]: master offset -30434 s2 freq -28485 path delay -3002
ptp4l[5279.338]: master offset -28041 s2 freq -27412 path delay -3002
ptp4l[5279.400]: master offset 7870 s2 freq +31118 path delay -3002
Fixes: 3a7496234d ("ice: implement basic E822 PTP support")
Reviewed-by: Milena Olech <milena.olech@intel.com>
Signed-off-by: Przemyslaw Korba <przemyslaw.korba@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4c1224501e9d6c5fd12d83752f1c1b444e0e3418 ]
During ARP failure, tid is not inserted but _c4iw_free_ep()
attempts to remove tid which results in error.
This patch fixes the issue by avoiding removal of uninserted tid.
Fixes: 59437d78f0 ("cxgb4/chtls: fix ULD connection failures due to wrong TID base")
Signed-off-by: Anumula Murali Mohan Reddy <anumula@chelsio.com>
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Link: https://patch.msgid.link/20250103092327.1011925-1-anumula@chelsio.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6aecd91a5c5b68939cf4169e32bc49f3cd2dd329 ]
[BUG]
Syzbot reported a crash with the following call trace:
BTRFS info (device loop0): scrub: started on devid 1
BUG: kernel NULL pointer dereference, address: 0000000000000208
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 106e70067 P4D 106e70067 PUD 107143067 PMD 0
Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 1 UID: 0 PID: 689 Comm: repro Kdump: loaded Tainted: G O 6.13.0-rc4-custom+ #206
Tainted: [O]=OOT_MODULE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022
RIP: 0010:find_first_extent_item+0x26/0x1f0 [btrfs]
Call Trace:
<TASK>
scrub_find_fill_first_stripe+0x13d/0x3b0 [btrfs]
scrub_simple_mirror+0x175/0x260 [btrfs]
scrub_stripe+0x5d4/0x6c0 [btrfs]
scrub_chunk+0xbb/0x170 [btrfs]
scrub_enumerate_chunks+0x2f4/0x5f0 [btrfs]
btrfs_scrub_dev+0x240/0x600 [btrfs]
btrfs_ioctl+0x1dc8/0x2fa0 [btrfs]
? do_sys_openat2+0xa5/0xf0
__x64_sys_ioctl+0x97/0xc0
do_syscall_64+0x4f/0x120
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
[CAUSE]
The reproducer is using a corrupted image where extent tree root is
corrupted, thus forcing to use "rescue=all,ro" mount option to mount the
image.
Then it triggered a scrub, but since scrub relies on extent tree to find
where the data/metadata extents are, scrub_find_fill_first_stripe()
relies on an non-empty extent root.
But unfortunately scrub_find_fill_first_stripe() doesn't really expect
an NULL pointer for extent root, it use extent_root to grab fs_info and
triggered a NULL pointer dereference.
[FIX]
Add an extra check for a valid extent root at the beginning of
scrub_find_fill_first_stripe().
The new error path is introduced by 42437a6386 ("btrfs: introduce
mount option rescue=ignorebadroots"), but that's pretty old, and later
commit b979547513 ("btrfs: scrub: introduce helper to find and fill
sector info for a scrub_stripe") changed how we do scrub.
So for kernels older than 6.6, the fix will need manual backport.
Reported-by: syzbot+339e9dbe3a2ca419b85d@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/67756935.050a0220.25abdd.0a12.GAE@google.com/
Fixes: 42437a6386 ("btrfs: introduce mount option rescue=ignorebadroots")
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ce4f287524c74a118b0af1eebd4b24a8efca57a ]
The existing SW-FW interaction flow on the driver is wrong. Follow this
wrong flow, driver would never return error if there is a unknown command.
Since firmware writes back 'firmware ready' and 'unknown command' in the
mailbox message if there is an unknown command sent by driver. So reading
'firmware ready' does not timeout. Then driver would mistakenly believe
that the interaction has completed successfully.
It tends to happen with the use of custom firmware. Move the check for
'unknown command' out of the poll timeout for 'firmware ready'. And adjust
the debug log so that mailbox messages are always printed when commands
timeout.
Fixes: 1efa9bfe58 ("net: libwx: Implement interaction with firmware")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20250103081013.1995939-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9a79c65f00e2b036e17af3a3a607d7d732b7affb ]
Since commit 099ecf59f0 ("net: annotate lockless accesses to
sk->sk_max_ack_backlog") decided to handle the sk_max_ack_backlog
locklessly, there is one more function mostly called in TCP/DCCP
cases. So this patch completes it:)
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240331090521.71965-1-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 3479c7549fb1 ("tcp/dccp: allow a connection when sk_max_ack_backlog is zero")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1e9b0e1c550c42c13c111d1a31e822057232abc4 ]
802.2+LLC+SNAP frames received by napi_complete_done() with GRO and DSA
have skb->transport_header set two bytes short, or pointing 2 bytes
before network_header & skb->data. This was an issue as snap_rcv()
expected offset to point to SNAP header (OID:PID), causing packet to
be dropped.
A fix at llc_fixup_skb() (a024e377efed) resets transport_header for any
LLC consumers that may care about it, and stops SNAP packets from being
dropped, but doesn't fix the problem which is that LLC and SNAP should
not use transport_header offset.
Ths patch eliminates the use of transport_header offset for SNAP lookup
of OID:PID so that SNAP does not rely on the offset at all.
The offset is reset after pull for any SNAP packet consumers that may
(but shouldn't) use it.
Fixes: fda55eca5a ("net: introduce skb_transport_header_was_set()")
Signed-off-by: Antonio Pastor <antonio.pastor@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250103012303.746521-1-antonio.pastor@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 55853cb829dc707427c3519f6b8686682a204368 ]
The pattern rule `$(OUTPUT)/%: %.c` inadvertently included a circular
dependency on the global-timer target due to its inclusion in
$(TEST_GEN_PROGS_EXTENDED). This resulted in a circular dependency
warning during the build process.
To resolve this, the dependency on $(TEST_GEN_PROGS_EXTENDED) has been
replaced with an explicit dependency on $(OUTPUT)/libatest.so. This change
ensures that libatest.so is built before any other targets that require it,
without creating a circular dependency.
This fix addresses the following warning:
make[4]: Entering directory 'tools/testing/selftests/alsa'
make[4]: Circular default_modconfig/kselftest/alsa/global-timer <- default_modconfig/kselftest/alsa/global-timer dependency dropped.
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory 'tools/testing/selftests/alsa'
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Link: https://patch.msgid.link/20241218025931.914164-1-lizhijian@fujitsu.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 32c9c06adb5b157ef259233775a063a43746d699 ]
On Chromebooks based on Mediatek MT8195 or MT8188, the audio frontend
(AFE) is limited to accessing a very small window (1 MiB) of memory,
which is described as a reserved memory region in the device tree.
On these two platforms, the maximum buffer size is given as 512 KiB.
The MediaTek common code uses the same value for preallocations. This
means that only the first two PCM substreams get preallocations, and
then the whole space is exhausted, barring any other substreams from
working. Since the substreams used are not always the first two, this
means audio won't work correctly.
This is observed on the MT8188 Geralt Chromebooks, on which the
"mediatek,dai-link" property was dropped when it was upstreamed. That
property causes the driver to only register the PCM substreams listed
in the property, and in the order given.
Instead of trying to compute an optimal value and figuring out which
streams are used, simply disable preallocation. The PCM buffers are
managed by the core and are allocated and released on the fly. There
should be no impact to any of the other MediaTek platforms.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20241219105303.548437-1-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 9e2f9d34dd12e6e5b244ec488bcebd0c2d566c50 upstream.
syzbot reported a task hang issue due to a deadlock case where it is
waiting for the folio lock of a cached folio that will be used for
cache I/Os.
After looking into the crafted fuzzed image, I found it's formed with
several overlapped big pclusters as below:
Ext: logical offset | length : physical offset | length
0: 0.. 16384 | 16384 : 151552.. 167936 | 16384
1: 16384.. 32768 | 16384 : 155648.. 172032 | 16384
2: 32768.. 49152 | 16384 : 537223168.. 537239552 | 16384
...
Here, extent 0/1 are physically overlapped although it's entirely
_impossible_ for normal filesystem images generated by mkfs.
First, managed folios containing compressed data will be marked as
up-to-date and then unlocked immediately (unlike in-place folios) when
compressed I/Os are complete. If physical blocks are not submitted in
the incremental order, there should be separate BIOs to avoid dependency
issues. However, the current code mis-arranges z_erofs_fill_bio_vec()
and BIO submission which causes unexpected BIO waits.
Second, managed folios will be connected to their own pclusters for
efficient inter-queries. However, this is somewhat hard to implement
easily if overlapped big pclusters exist. Again, these only appear in
fuzzed images so let's simply fall back to temporary short-lived pages
for correctness.
Additionally, it justifies that referenced managed folios cannot be
truncated for now and reverts part of commit 2080ca1ed3e4 ("erofs: tidy
up `struct z_erofs_bvec`") for simplicity although it shouldn't be any
difference.
Reported-by: syzbot+4fc98ed414ae63d1ada2@syzkaller.appspotmail.com
Reported-by: syzbot+de04e06b28cfecf2281c@syzkaller.appspotmail.com
Reported-by: syzbot+c8c8238b394be4a1087d@syzkaller.appspotmail.com
Tested-by: syzbot+4fc98ed414ae63d1ada2@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/0000000000002fda01061e334873@google.com
Fixes: 8e6c8fa9f2 ("erofs: enable big pcluster feature")
Link: https://lore.kernel.org/r/20240910070847.3356592-1-hsiangkao@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c45beebfde34aa71afbc48b2c54cdda623515037 ]
Dmitry Safonov reported that a WARN_ON() assertion can be trigered by
userspace when calling inotify_show_fdinfo() for an overlayfs watched
inode, whose dentry aliases were discarded with drop_caches.
The WARN_ON() assertion in inotify_show_fdinfo() was removed, because
it is possible for encoding file handle to fail for other reason, but
the impact of failing to encode an overlayfs file handle goes beyond
this assertion.
As shown in the LTP test case mentioned in the link below, failure to
encode an overlayfs file handle from a non-aliased inode also leads to
failure to report an fid with FAN_DELETE_SELF fanotify events.
As Dmitry notes in his analyzis of the problem, ovl_encode_fh() fails
if it cannot find an alias for the inode, but this failure can be fixed.
ovl_encode_fh() seldom uses the alias and in the case of non-decodable
file handles, as is often the case with fanotify fid info,
ovl_encode_fh() never needs to use the alias to encode a file handle.
Defer finding an alias until it is actually needed so ovl_encode_fh()
will not fail in the common case of FAN_DELETE_SELF fanotify events.
Fixes: 16aac5ad1f ("ovl: support encoding non-decodable file handles")
Reported-by: Dmitry Safonov <dima@arista.com>
Closes: https://lore.kernel.org/linux-fsdevel/CAOQ4uxiie81voLZZi2zXS1BziXZCM24nXqPAxbu8kxXCUWdwOg@mail.gmail.com/
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20250105162404.357058-3-amir73il@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5b02bfc1e7e3811c5bf7f0fa626a0694d0dbbd77 ]
When lower fs is a nested overlayfs, calling encode_fh() on a lower
directory dentry may trigger copy up and take sb_writers on the upper fs
of the lower nested overlayfs.
The lower nested overlayfs may have the same upper fs as this overlayfs,
so nested sb_writers lock is illegal.
Move all the callers that encode lower fh to before ovl_want_write().
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Stable-dep-of: c45beebfde34 ("ovl: support encoding fid from inode with no alias")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0bb1968da2737ba68fd63857d1af2b301a18d3bf ]
dm_array_cursor_skip() seeks to the target position by loading array
blocks iteratively until the specified number of entries to skip is
reached. When seeking across block boundaries, it uses
dm_array_cursor_next() to step into the next block.
dm_array_cursor_skip() must first move the cursor index to the end
of the current block; otherwise, the cursor position could incorrectly
remain in the same block, causing the actual number of skipped entries
to be much smaller than expected.
This bug affects cache resizing in v2 metadata and could lead to data
loss if the fast device is shrunk during the first-time resume. For
example:
1. create a cache metadata consists of 32768 blocks, with a dirty block
assigned to the second bitmap block. cache_restore v1.0 is required.
cat <<EOF >> cmeta.xml
<superblock uuid="" block_size="64" nr_cache_blocks="32768" \
policy="smq" hint_width="4">
<mappings>
<mapping cache_block="32767" origin_block="0" dirty="true"/>
</mappings>
</superblock>
EOF
dmsetup create cmeta --table "0 8192 linear /dev/sdc 0"
cache_restore -i cmeta.xml -o /dev/mapper/cmeta --metadata-version=2
2. bring up the cache while attempt to discard all the blocks belonging
to the second bitmap block (block# 32576 to 32767). The last command
is expected to fail, but it actually succeeds.
dmsetup create cdata --table "0 2084864 linear /dev/sdc 8192"
dmsetup create corig --table "0 65536 linear /dev/sdc 2105344"
dmsetup create cache --table "0 65536 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 64 2 metadata2 writeback smq \
2 migration_threshold 0"
In addition to the reproducer described above, this fix can be
verified using the "array_cursor/skip" tests in dm-unit:
dm-unit run /pdata/array_cursor/skip/ --kernel-dir <KERNEL_DIR>
Signed-off-by: Ming-Hung Tsai <mtsai@redhat.com>
Fixes: 9b696229aa ("dm persistent data: add cursor skip functions to the cursor APIs")
Reviewed-by: Joe Thornber <thornber@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 626f128ee9c4133b1cfce4be2b34a1508949370e ]
The cached block pointer in dm_array_cursor might be NULL if it reaches
an unreadable array block, or the array is empty. Therefore,
dm_array_cursor_end() should call dm_btree_cursor_end() unconditionally,
to prevent leaving unreleased btree blocks.
This fix can be verified using the "array_cursor/iterate/empty" test
in dm-unit:
dm-unit run /pdata/array_cursor/iterate/empty --kernel-dir <KERNEL_DIR>
Signed-off-by: Ming-Hung Tsai <mtsai@redhat.com>
Fixes: fdd1315aa5 ("dm array: introduce cursor api")
Reviewed-by: Joe Thornber <thornber@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a0851ea9cd555c333795b85ddd908898b937c4e1 ]
When committing transaction in jbd2_journal_commit_transaction(), the
disk caches for the filesystem device should be flushed before updating
the journal tail sequence. However, this step is missed if the journal
is not located on the filesystem device. As a result, the filesystem may
become inconsistent following a power failure or system crash. Fix it by
ensuring that the filesystem device is flushed appropriately.
Fixes: 3339578f05 ("jbd2: cleanup journal tail after transaction commit")
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://lore.kernel.org/r/20241203014407.805916-3-yi.zhang@huaweicloud.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ac1e21bd8c883aeac2f1835fc93b39c1e6838b35 ]
Commit '6a3afb6ac6df ("jbd2: increase the journal IO's priority")'
increases the priority of journal I/O by marking I/O with the
JBD2_JOURNAL_REQ_FLAGS. However, that commit missed the revoke buffers,
so also addresses that kind of I/Os.
Fixes: 6a3afb6ac6df ("jbd2: increase the journal IO's priority")
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://lore.kernel.org/r/20241203014407.805916-2-yi.zhang@huaweicloud.com
Reviewed-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
