Our hotplug handler will currently call the drm_kms_helper_hotplug_event
every time a hotplug interrupt is called.
However, since the device is registered after all the drivers have
finished their bind callback, we have a window between when we install
our interrupt handler and when drm_dev_register() is eventually called
where our handler can run and call drm_kms_helper_hotplug_event but the
device hasn't been registered yet, causing a null pointer dereference.
Fix this by making sure we only call drm_kms_helper_hotplug_event if our
device has been properly registered.
Fixes: f4790083c7 ("drm/vc4: hdmi: Rely on interrupts to handle hotplug")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210707095112.1469670-4-maxime@cerno.tech
The hotplugs interrupt handlers are registered through the
devm_request_threaded_irq function. However, while free_irq is indeed
called properly when the device is unbound or bind fails, it's called
after unbind or bind is done.
In our particular case, it means that on failure it creates a window
where our interrupt handler can be called, but we're freeing every
resource (CEC adapter, DRM objects, etc.) it might need.
In order to address this, let's switch to the non-devm variant to
control better when the handler will be unregistered and allow us to
make it safe.
Fixes: f4790083c7 ("drm/vc4: hdmi: Rely on interrupts to handle hotplug")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210707095112.1469670-3-maxime@cerno.tech
We were getting a depmod error:
depmod: ERROR: Cycle detected: drm_kms_helper -> drm -> drm_kms_helper
It looks like the rule is that drm_kms_helper can call into drm, but
drm can't call into drm_kms_helper. That means we've got to move the
DP AUX backlight support into drm_dp_helper.
NOTE: as part of this, I didn't try to do any renames of the main
registration function. Even though it's in the drm_dp_helper, it still
feels very parallel to drm_panel_of_backlight().
Fixes: 10f7b40e4f ("drm/panel: add basic DP AUX backlight support")
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reported-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Rajeev Nandan <rajeevny@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210712075933.v2.1.I23eb4cc5a680341e7b3e791632a635566fa5806a@changeid
Store the shadow-buffer mapping's address in struct vkms_composer and
use the value when composing the output. It's the same value as stored
in the GEM SHMEM BO, but frees the composer code from its dependency
on GEM SHMEM.
Using struct dma_buf_map is how framebuffer access is supposed to be.
The long-term plan is to perform all framebuffer access via struct
dma_buf_map and avoid the details of accessing I/O and system memory.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210705074633.9425-5-tzimmermann@suse.de
Replace vkms' prepare_fb and cleanup_fb functions with the generic
code for shadow-buffered planes. No functional changes.
This change also fixes a problem where IGT kms_flip tests would
create a segmentation fault within vkms. The driver's prepare_fb
function did not report an error if a BO's vmap operation failed.
The kernel later tried to operate on the non-mapped memory areas.
The shared shadow-plane helpers handle errors correctly, so that
the driver now avoids the segmantation fault.
v2:
* include paragraph about IGT tests in commit message (Melissa)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210705074633.9425-4-tzimmermann@suse.de
Some panels support backlight control over DP AUX channel using
VESA's standard backlight control interface.
Using new DRM eDP backlight helpers, add support to create and
register a backlight for those panels in drm_panel to simplify
the panel drivers.
The panel driver with access to "struct drm_dp_aux" can create and
register a backlight device using following code snippet in its
probe() function:
err = drm_panel_dp_aux_backlight(panel, aux);
if (err)
return err;
Then drm_panel will handle backlight_(enable|disable) calls
similar to the case when drm_panel_of_backlight() is used.
Currently, we are not supporting one feature where the source
device can combine the backlight brightness levels set through
DP AUX and the BL_PWM_DIM eDP connector pin. Since it's not
required for the basic backlight controls, it can be added later.
Signed-off-by: Rajeev Nandan <rajeevny@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
[dianders: added blank line for warning when applying]
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1624726268-14869-2-git-send-email-rajeevny@codeaurora.org
There'a limit to how big a kmalloc buffer can be, and as memory gets
fragmented it becomes more difficult to get big buffers. The downside of
smaller buffers is that the driver has to split the transfer up which
hampers performance. Compression might also take a hit because of the
splitting.
Solve this by allocating the transfer buffer using vmalloc and create a
SG table to be passed on to the USB subsystem. vmalloc_32() is used to
avoid DMA bounce buffers on USB controllers that can only access 32-bit
addresses.
This also solves the problem that split transfers can give host side
tearing since flushing is decoupled from rendering.
usb_sg_wait() doesn't have timeout handling builtin, so it is wrapped in
a timer like 4 out of 6 users in the kernel have done.
v2:
- Use DIV_ROUND_UP (Linus)
- Add timeout note to the commit log (Linus)
- Expand note about upper buffer limit (Linus)
- Change var name s/timer/ctx/ in gud_usb_bulk_timeout()
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210701170748.58009-2-noralf@tronnes.org
Free transfer and compression buffers on device removal instead of at
DRM device removal time. This ensures that the usual 2x8MB buffers are
released when the device is unplugged and not kept around should
userspace keep the DRM device fd open.
At least Ubuntu 20.04 doesn't release the DRM device on unplug.
The damage_lock mutex is not destroyed because it is used outside the
drm_dev_enter/exit block in gud_pipe_update(). AFAICT it's possible for
an open fbdev descriptor to trigger a commit after the USB device is gone.
v2: Don't destroy damage_lock
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210701170748.58009-1-noralf@tronnes.org
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.
Vmwgfx already uses Linux IRQ functions. All that's left to replace
is the reference to struct drm_device.irq. Use irq value of struct
pci_dev instead.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210706072253.6844-1-tzimmermann@suse.de
Adjust the DVP enable/disable sequence to avoid a pixel getting stuck
in an internal, non resettable FIFO within PixelValve when changing
HDMI resolution.
The blank pixels features of the DVP can prevent signals back to
pixelvalve causing it to not clear the FIFO. Adjust the ordering
and timing of operations to ensure the clear signal makes it through to
pixelvalve.
Signed-off-by: Tim Gover <tim.gover@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210628130533.144617-1-maxime@cerno.tech
We don't want to print an error message each time
devm_snd_soc_register_card() returns -EPROBE_DEFER, the function will
most likely succeed some time in the future, once the missing resources
are available. So use dev_err_probe(), which will redirect the messages
to the debug log level in such case.
Signed-off-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210629121723.11523-1-nsaenzju@redhat.com
