The single shrink function will free lower order pages first. This
enables compaction to work properly.
Change-Id: Icbeefa9e84c2eacf6962d9536ab66a8b059cc941
Currently the mutex is held while kmalloc is called, under a low memory
condition this might trigger the shrinker which also takes this mutex.
Refactor so the mutex is not held during allocation.
Change-Id: Ic1d3b2f69e61209191bac84724ba56f6b98e2bc4
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
qtudev_open() could return with a uid_tag_data_tree_lock held
when an kzalloc(..., GFP_ATOMIC) would fail.
Very unlikely to get triggered AND survive the mayhem of running out of mem.
Signed-off-by: JP Abgrall <jpa@google.com>
Split out low and high mem pages so they are correctly reported
when the shrinker is called.
Fix potential deadlock caused by holding the page pool lock while
allocationg and also needing that lock from the shrink function
Change-Id: I6def3a3111f59914ef6b5b59d81a6fde37cb60c5
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
Alarmtimer may execute the monitor early in the resume sequence. Freeze the
monitor while suspended, and unfreeze after the battery charger and fuel gauge,
etc. drivers are resumed.
Change-Id: Iefda1c642d4b2440169d90d2bee2888fc70e030a
Signed-off-by: Todd Poynor <toddpoynor@google.com>
This patch adds a debugfs file called "shrinker" when read this calls
all the shrinkers in the system with nr_to_scan set to zero and prints
the result. These results are the number of objects the shrinkers have
available and can thus be used an indication of the total memory
that would be availble to the system if a shrink occurred.
Change-Id: Ied0ee7caff3d2fc1cb4bb839aaafee81b5b0b143
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
- Alarm Timer driver is suspended before battery driver, so alarm
timer was not changed to slow poll speed at suspend. Use PM
notifiers instead.
- If charger is connected, keep 1 min alarm timer.
Signed-off-by: HongMin Son <hongmin.son@samsung.com>
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Change-Id: Id0f3bda5d0749fd90f1964073bc30c1a73fc317f
If charger was connected and a charge source change event occurs such that
the charger is still connected (or a different charge source connected),
do not overwrite an existing state such as full or not-charging. Only
switch from discharging to charging on a charge source change event.
Change-Id: I1b841c8f3a92bf15074999e18b17d1d19ce028d7
Signed-off-by: Todd Poynor <toddpoynor@google.com>
When load is below go_hispeed_load, apply the percentage of CPU load to
a max frequency of hispeed_freq instead of the max speed. This avoids
jumping too quickly to hispeed_freq when it is a relatively low
percentage of max speed. This also allows go_hispeed_load to be set to
a high percentage relative to hispeed_freq (as a percentage of max speed,
again useful when hispeed_freq is a low fraction of max speed), to cap
larger loads at hispeed_freq. For example, a load of 60% will typically
move to 60% of hispeed_freq, not 60% of max speed. This causes the
governor to apply two different speed caps, depending on whether load is
below or above go_hispeed_load.
Also fix the type of hispeed_freq, which was u64, to match other
speed data types (and avoid overhead and allow division).
Change-Id: Ie2d0668be161c074aaad77db2037505431457b3a
Signed-off-by: Todd Poynor <toddpoynor@google.com>
When allocations larger than order 4 are made, use _GFP_NORETRY
and __GFP_NO_KSWAPD so kswapd doesn't get kicked off to reclaim
these larger chunks. For smaller allocaitons, these are
unnecessary, as the system should be able to reclaim these.
Change-Id: I6b45cd1a595d25cc39622e3dbcc04d84fa1b7db8
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
With this change the system heap will use pagepools to avoid
having to invalidate memory when it is allocated, a
significant performance improvement on some systems.
Change-Id: I96ab778d67c4b19805883dcfa44d750811cdff48
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
This patch adds a new utility heaps can use to manage
memory. In the past we have found it can be very
expensive to manage the caches when allocating memory,
but it is imposible to know whether a previous user of a
given memory allocation had a cached mapping. This patch
adds the ability to store a pool of pages that were
previously used uncached so that cache maintenance
only need be done when growing this pool. The pool also
contains a shrinker so memory from the pool can be
recovered in low memory conditions.
Change-Id: I686fd7d192060fd32d34ef66471f62b7829006ee
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
When ion_map_kernel is execute the system must allocate
an array large enough to hold a pointer to each page in
the buffer. If the buffer is very large and the system
memory has become very fragmented, there may not be
sufficient high order allocations available from kmalloc.
Use vmalloc instead.
Change-Id: I5fabf79be6cfd158f7805bfca6267a60c4708582
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
The conversion to use oom_score_adj instead of the deprecated oom_adj
values breaks existing user-space code. Add a config option to convert
oom_adj values written to oom_score_adj values if they appear to be
valid oom_adj values.
Change-Id: I68308125059b802ee2991feefb07e9703bc48549
Signed-off-by: Arve Hjønnevåg <arve@android.com>
With this patch the system heap will only try to allocate from each
order as long as allocations succeed. If it failes to obtain a higher
order allocation, it doesn't retry that order.
Change-Id: I0d9144b4c30cc0e427acdcad2f1f12ae7f37f827
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
If a buffer's user mappings are not going to be faulted
in it need not be allocated page wise. We can optimize
this common case by allocating an sglist of larger chunks
rather than creating an entry for each page in the
allocation.
Change-Id: I47814990e55c7bdb7abeaa2af824744b0a97602d
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
First bump speed up to hispeed_freq whenever the current speed is below
hispeed_freq, instead of only when the current speed is the minimum speed.
The previous code made it too difficult to use hispeed_freq as a common
intermediate speed on systems that frequently run at speeds between
minimum and hispeed_freq.
Change-Id: I04ec30bafabf5741e267ff289209b8c2d846824b
Signed-off-by: Todd Poynor <toddpoynor@google.com>
ffs_func_eps_enable always take the highspeed usb_endpoint_descriptor
if it is available. Choose the correct usb_endpoint_descriptor
depending on the gadget speed instead.
Change-Id: I5b8444cfdf1b6fe1eef25525fb7a0a0f617a353e
Signed-off-by: Benoit Goby <benoit@android.com>
We have found that faulting in the mappings for cached
allocations has a significant performance impact and is
only a benefit if only a small part of the buffer is
touched by the cpu (an uncommon case for software rendering).
This patch introduces a ION_FLAG_CACHED_NEEDS_SYNC
which determines whether a mapping should be created by
faulting or at mmap time. If this flag is set,
userspace must manage the caches explictly using the SYNC ioctl.
Change-Id: I227561f49e0f382a481728fb55ac5c930fc26025
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
This driver presents a standard USB audio class interface to the host
and an ALSA PCM device to userspace
Change-Id: If16b14a5ff27045f9cb2daaf1ae9195c5eeab7d0
Signed-off-by: Mike Lockwood <lockwood@google.com>
The control request will be used by the host to enable/disable USB audio
and the ioctl will be used by userspace to read the audio mode
Change-Id: I81c38611b588451e80eacdccc417ca6e11c60cab
Signed-off-by: Mike Lockwood <lockwood@google.com>
Place SLPZ pin in sleep state at system suspend time if a GPIO is
provided by board platform data.
Change-Id: I93c61fa0ae474e968e0f909209c9bfcaafe3dd2c
Signed-off-by: Todd Poynor <toddpoynor@google.com>
It is possible for a buffer to exist only as a dma_buf file
descriptor without it being held in any handles. When this
occurs it is impossible to track where the buffer is in the
system (without traversing every process in the system and
inspecting its file table). When buffers are orphaned like
this, copy the task comm and pid of the last client to hold
them into the buffer so we have a debugging hint as to where
this buffer came from. In practice this will probalby be
the process that allocated the buffer.
Change-Id: I49d179f9ccdee36982f365af15d0f0b577c6347e
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
If preemted during ion_free after the refcount is updated but
before the handle can be removed from the rb_tree, import
might find that handle in the tree and try to reuse it
when execution returns to free, the handle will be cleaned
up leaving the caller of import with a corrupt handle.
This patch modifies the locking to protect agains this race.
Change-Id: I31d18cc6398f0ca18e05cd919e2bcf86fa18d568
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
In the past, a process could only see its own stats (uid-based summary,
and details).
Now we allow any process to see other UIDs uid-based stats, but still
hide the detailed stats.
Change-Id: I7666961ed244ac1d9359c339b048799e5db9facc
Signed-off-by: JP Abgrall <jpa@google.com>
Same units as power_supply, don't need 1/10000 deg C and conversion
is error-prone.
Change-Id: I8cf146d2a7725df2dacc415daa66b2986b69f2a7
Signed-off-by: Todd Poynor <toddpoynor@google.com>
For reflecting board-level decisions on whether USB or AC charger
is connected, which may differ from charger power supply notion
of USB input path (which may be connected to an AC charger) vs.
AC input path.
Change-Id: I9d2eb446db8b4d9496ba7ce1472d0e7a4d4e24ef
[toddpoynor@google.com: refactoring]
Signed-off-by: hongmin.son <hongmin.son@samsung.com>
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Avoid shutdown due to battery capacity or temperature out of range.
Change-Id: I54abe4dc54bf2fb8a9b972a3940e6fd93cc60473
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Previously, metadata was stored in the allocated pages themselves
during allocation. However the system can only have a limited
number of kmapped pages. A very large allocation might exceed
this limit.
Change-Id: Ibe972096e83924bf5e621d8282c4cd133ca75b0a
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
Since the smp call to stop the other cpus are handled in those
cpus in interrupt context, there's a potential for those smp
handlers to interrupt threads holding spin locks (such as the
one a mutex holds). This prevents those threads from ever
releasing their spin lock, so if the cpu doing the shutdown
is allowed to switch to another thread that tries to grab the
same lock/mutex, we could get into a deadlock (the spin lock
call is called with preemption disabled in the mutex lock code).
To avoid that possibility, disable preemption before doing the
smp_send_stop().
Change-Id: I7976c5382d7173fcb3cd14da8cc5083d442b2544
Signed-off-by: Mike J. Chen <mjchen@google.com>
Refactor the dpm suspend watchdog code and add watchdogs
on resume too. The dpm wachdog prints the stack trace and
reboots the system if a device takes more than 12 seconds
to suspend or resume.
Change-Id: If00c047a17b80bdc13a8426393c698bc450a7347
Signed-off-by: Benoit Goby <benoit@android.com>
Based on Tuna code from 3.0 ported to 3.4 alarm API.
Change-Id: I9b13209963d5a5043237e9e29f3cb07c40583af2
Signed-off-by: Todd Poynor <toddpoynor@google.com>
If dma_buf_fd fails, the dma_buf needs to be cleaned up by
calling dma_buf_put. dma_buf_put will call ion_dma_buf_release
which in turn calls ion_buffer_put to clean up the buffer
reference. Calling ion_buffer_put after dma_buf_put drops the
reference count by one more which is incorrect. Fix this by
getting rid of the extra ion_buffer_put call.
Change-Id: Ieb3a7b781bf2dc299c45384dbf0a12d186adeb22
Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
Add a generic battery power supply and glue logic for talking to the
board battery driver. This driver handles common chores such as:
* periodic battery level and health monitoring
* kernel log reporting and other debugging features for key
properties provided by different charger, fuel gauge, etc.
components
* ensure properties such as battery health are made available to
userspace
* common processing for board-level battery/case temperature sensors
and policy for charging status based on battery health
Based on work by himihee.seo@samsung.com, ms925.kim@samsung.com, and
joshua.chang@samsung.com.
Change-Id: I5fa8e8d68811d84820b7a130b0245ad2b5b6d36b
Signed-off-by: Todd Poynor <toddpoynor@google.com>
ION_IOC_MAP, ION_IOC_SHARE, and ION_IOC_IMPORT may return
success when an error occurs.
Add correct error handling to ION_IOC_MAP, ION_IOC_SHARE, and
ION_IOC_IMPORT.
Change-Id: I61c6b0c574da425604235b2d39e13e4a27f7b6f3
Signed-off-by: Olav Haugan <ohaugan@codeaurora.org>
Several functions in the ion interface is missing
EXPORT_SYMBOL. This is needed to allow clients to
use these functions from kernel modules.
Add EXPORT_SYMBOL to functions that are supposed
to be exposed.
Change-Id: I25611f7c367fd131daf5fb652abbea77e89a3d06
Signed-off-by: Olav Haugan <ohaugan@codeaurora.org>
