Before commit 3d56987938 ("vhost-vdpa: introduce asid based IOTLB")
we call vhost_vdpa_iotlb_free() during the release to clean all regions
mapped in the iotlb.
That commit removed vhost_vdpa_iotlb_free() and added vhost_vdpa_cleanup()
to do some cleanup, including deleting all mappings, but we forgot to call
it in vhost_vdpa_release().
This causes that if an application does not remove all mappings explicitly
(or it crashes), the mappings remain in the iotlb and subsequent
applications may fail if they map the same addresses.
Calling vhost_vdpa_cleanup() also fixes a memory leak since we are not
freeing `v->vdev.vqs` during the release from the same commit.
Since vhost_vdpa_cleanup() calls vhost_dev_cleanup() we can remove its
call from vhost_vdpa_release().
Fixes: 3d56987938 ("vhost-vdpa: introduce asid based IOTLB")
Cc: gautam.dawar@xilinx.com
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20220622151407.51232-1-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit 037d430556)
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Ia2101b1b45143c342bc85a379a8859474f7c5128
Virtio devices might lose their state when the VMM is restarted
after a suspend to disk (hibernation) cycle. This means that the
guest page size register must be restored for the virtio_mmio legacy
interface, since otherwise the virtio queues are not functional.
This is particularly problematic for QEMU that currently still defaults
to using the legacy interface for virtio_mmio. Write the guest page
size register again in virtio_mmio_restore() to make legacy virtio_mmio
devices work correctly after hibernation.
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Message-Id: <20220621110621.3638025-3-stephan.gerhold@kernkonzept.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit e0c2ce8217)
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I8dc514a699d9fbc4a209ef9523e3bc25dbe6a3d5
Most virtio drivers provide freeze/restore callbacks to finish up
device usage before suspend and to reinitialize the virtio device after
resume. However, these callbacks are currently only called when using
virtio_pci. virtio_mmio does not have any PM ops defined.
This causes problems for example after suspend to disk (hibernation),
since the virtio devices might lose their state after the VMM is
restarted. Calling virtio_device_freeze()/restore() ensures that
the virtio devices are re-initialized correctly.
Fix this by implementing the dev_pm_ops for virtio_mmio,
similar to virtio_pci_common.
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Message-Id: <20220621110621.3638025-2-stephan.gerhold@kernkonzept.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit ed7ac37fde)
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I6be577fb90dd9c444b11676b0baf80d1c5c20de6
We currently depend on probe() calling virtio_device_ready() -
which happens after netdev
registration. Since ndo_open() can be called immediately
after register_netdev, this means there exists a race between
ndo_open() and virtio_device_ready(): the driver may start to use the
device (e.g. TX) before DRIVER_OK which violates the spec.
Fix this by switching to use register_netdevice() and protect the
virtio_device_ready() with rtnl_lock() to make sure ndo_open() can
only be called after virtio_device_ready().
Fixes: 0d2e1a2926 ("caif_virtio: Introduce caif over virtio")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220620051115.3142-3-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 11a37eb668)
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I7abe77d08c92c561676def322baf54fa1fce58a8
We currently call virtio_device_ready() after netdev
registration. Since ndo_open() can be called immediately
after register_netdev, this means there exists a race between
ndo_open() and virtio_device_ready(): the driver may start to use the
device before DRIVER_OK which violates the spec.
Fix this by switching to use register_netdevice() and protect the
virtio_device_ready() with rtnl_lock() to make sure ndo_open() can
only be called after virtio_device_ready().
Fixes: 4baf1e33d0 ("virtio_net: enable VQs early")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220617072949.30734-1-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 50c0ada627)
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Iab222236dcc22d51befa98831c5306264aea09e5
We try to harden virtio device notifications in 8b4ec69d7e ("virtio:
harden vring IRQ"). It works with the assumption that the driver or
core can properly call virtio_device_ready() at the right
place. Unfortunately, this seems to be not true and uncover various
bugs of the existing drivers, mainly the issue of using
virtio_device_ready() incorrectly.
So let's add a Kconfig option and disable it by default. It gives
us time to fix the drivers and then we can consider re-enabling it.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220622012940.21441-1-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
(cherry picked from commit c346dae4f3)
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I614cddfdac6e456b7786d3949d7ec793720c4e14
In function vp_modern_probe(), "pci_dev" is initialized with the
value of "mdev->pci_dev", so assigning "pci_dev" to "mdev->pci_dev"
is unnecessary since they store the same value.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Message-Id: <20220617055952.5364-1-liubo03@inspur.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
(cherry picked from commit 03d9571706)
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Iac1a1f5d53f6514ff8bb97e6f85fdb63bbdd166d
the used_wrap_counter and the vq->last_used_idx may get
out of sync if they are separate assignment，and interrupt
might use an incorrect value to check for the used index.
for example:OOB access
ksoftirqd may consume the packet and it will call:
virtnet_poll
-->virtnet_receive
-->virtqueue_get_buf_ctx
-->virtqueue_get_buf_ctx_packed
and in virtqueue_get_buf_ctx_packed:
vq->last_used_idx += vq->packed.desc_state[id].num;
if (unlikely(vq->last_used_idx >= vq->packed.vring.num)) {
vq->last_used_idx -= vq->packed.vring.num;
vq->packed.used_wrap_counter ^= 1;
}
if at the same time, there comes a vring interrupt，in vring_interrupt:
we will call:
vring_interrupt
-->more_used
-->more_used_packed
-->is_used_desc_packed
in is_used_desc_packed, the last_used_idx maybe >= vq->packed.vring.num.
so this could case a memory out of bounds bug.
this patch is to keep the used_wrap_counter in vq->last_used_idx
so we can get the correct value to check for used index in interrupt.
v3->v4:
- use READ_ONCE/WRITE_ONCE to get/set vq->last_used_idx
v2->v3:
- add inline function to get used_wrap_counter and last_used
- when use vq->last_used_idx, only read once
if vq->last_used_idx is read twice, the values can be inconsistent.
- use last_used_idx & ~(-(1 << VRING_PACKED_EVENT_F_WRAP_CTR))
to get the all bits below VRING_PACKED_EVENT_F_WRAP_CTR
v1->v2:
- reuse the VRING_PACKED_EVENT_F_WRAP_CTR
- Remove parameter judgment in is_used_desc_packed,
because it can't be illegal
Signed-off-by: huangjie.albert <huangjie.albert@bytedance.com>
Message-Id: <20220617020411.80367-1-huangjie.albert@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit a7722890fd)
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I6589c086af4d1048921e8e325ba950c1ef657235
Currently, CVQ vringh is initialized inside setup_virtqueues() which is
called every time a memory update is done. This is undesirable since it
resets all the context of the vring, including the available and used
indices.
Move the initialization to mlx5_vdpa_set_status() when
VIRTIO_CONFIG_S_DRIVER_OK is set.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Message-Id: <20220613075958.511064-2-elic@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
(cherry picked from commit ace9252446)
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I03105745cb12c261c49a4fdf4deb87780c035001
The control VQ specific information is stored in the dedicated struct
mlx5_control_vq. When the callback is updated through
mlx5_vdpa_set_vq_cb(), make sure to update the control VQ struct.
Fixes: 5262912ef3 ("vdpa/mlx5: Add support for control VQ and MAC setting")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Message-Id: <20220613075958.511064-1-elic@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com)
(cherry picked from commit 40f2f3e941)
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I4ef42d0ff2f8b3e5156b54473ebc5ebb877c22d2
This patch makes get_vq_group and set_group_asid optional. This is
needed to unbreak the vDPA parent that doesn't support multiple
address spaces.
Cc: Gautam Dawar <gautam.dawar@xilinx.com>
Fixes: aaca8373c4 ("vhost-vdpa: support ASID based IOTLB API")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220609041901.2029-1-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 00d1f54647)
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I83cce7173bc7ec6dd00479932d5515bfacb50fe1
We should use size of descriptor chain to test loop condition
in the indirect case. And another statistical count is also introduced
for indirect descriptors to avoid conflict with the statistical count
of direct descriptors.
Fixes: f87d0fbb57 ("vringh: host-side implementation of virtio rings.")
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Signed-off-by: Fam Zheng <fam.zheng@bytedance.com>
Message-Id: <20220505100910.137-1-xieyongji@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit dbd29e0752)
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I989cc3d74401507f6b9c282971e60ecb21785895
These lines were supposed to be indented.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Message-Id: <Yp71IYMP+QfuCJ8t@kili>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Eli Cohen <elic@nvidia.com>
Acked-by: Si-Wei Liu <si-wei.liu@oracle.com>
(cherry picked from commit f38b3c6a78)
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I92310051004e413b6ffbf9f89e7e4ce939614fcf
Return success if we were able to delete a vlan. The current code
always returns failure.
Fixes: baf2ad3f6a ("vdpa/mlx5: Add RX MAC VLAN filter support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Message-Id: <Yp709f1g9NcMBCHg@kili>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Eli Cohen <elic@nvidia.com>
Acked-by: Si-Wei Liu <si-wei.liu@oracle.com>
(cherry picked from commit f766c409fc)
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Ibaa57311cd2e123688f6261dc09bb547dd82c504
Call virtio_device_ready() to make this driver work after commit
b4ec69d7e09 ("virtio: harden vring IRQ"), since the driver uses the
virtqueues in the probe function. (The virtio core sets the device
ready when probe returns.)
Fixes: 8b4ec69d7e ("virtio: harden vring IRQ")
Fixes: 68f5d3f3b6 ("um: add PCI over virtio emulation driver")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Message-Id: <20220610151203.3492541-1-vincent.whitchurch@axis.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Johannes Berg <johannes@sipsolutions.net>
(cherry picked from commit eacea84459)
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: If175f1a6a10e3f53afa89b9ae3f98cd6e6f99823
Enable support for IPv6 multicast forwarding, required for devices with
border routing capabilities. Note this option will likely be unset after
making ipv6 a GKI module.
Bug: 233821827
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Change-Id: I0ffabbe21373ac23bc353abda51862eba0135972
Add the drivers/leds/rgb/leds-qcom-lpg.ko driver to the list of modules
that the db845c build needs as it is now upstream and actually builds.
Fixes: 24e2d05d1b ("leds: Add driver for Qualcomm LPG")
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I5bb6ffe688c5c9fe85313d1d7302d248789508ab
Commit 0710d0122a ("mm: Kconfig: reorganize misplaced mm options")
reorginized the mm config options a bit, so the gki_defconfig options
also need to be reordered so that the build succeeds.
Fixes: 0710d0122a ("mm: Kconfig: reorganize misplaced mm options")
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Ic4228bc9498258e0d184daeac482c79253843b83
In commit 7374fa33dc ("init/Kconfig: remove USELIB syscall by
default") CONFIG_USELIB is disabled, so remove the "is not set" setting
in the x86 gki_defconfig file to resolve the build issue.
Fixes: 7374fa33dc ("init/Kconfig: remove USELIB syscall by default")
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: If7565bffb90b2efd913f08a8aeccbb11cc77ac17
