[ Upstream commit d0304569fb019d1bcfbbbce1ce6df6b96f04079b ]
Kernel timekeeping is designed to keep the change in cycles (since the last
timer interrupt) below max_cycles, which prevents multiplication overflow
when converting cycles to nanoseconds. However, if timer interrupts stop,
the clocksource_cyc2ns() calculation will eventually overflow.
Add protection against that. Simplify by folding together
clocksource_delta() and clocksource_cyc2ns() into cycles_to_nsec_safe().
Check against max_cycles, falling back to a slower higher precision
calculation.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240325064023.2997-20-adrian.hunter@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dce0919c83c325ac9dec5bc8838d5de6d32c01b1 ]
As per the hardware team, TIEN and TINT source should not set at the same
time due to a possible hardware race leading to spurious IRQ.
Currently on some scenarios hardware settings for TINT detection is not in
sync with TINT source as the enable/disable overrides source setting value
leading to hardware inconsistent state. For eg: consider the case GPIOINT0
is used as TINT interrupt and configuring GPIOINT5 as edge type. During
rzg2l_irq_set_type(), TINT source for GPIOINT5 is set. On disable(),
clearing of the entire bytes of TINT source selection for GPIOINT5 is same
as GPIOINT0 with TIEN disabled. Apart from this during enable(), the
setting of GPIOINT5 with TIEN results in spurious IRQ as due to a HW race,
it is possible that IP can use the TIEN with previous source value
(GPIOINT0).
So, just update TIEN during enable/disable as TINT source is already set
during rzg2l_irq_set_type(). This will make the consistent hardware
settings for detection method tied with TINT source and allows to simplify
the code.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4e8477aeb46dfe74e829c06ea588dd00ba20c8cc ]
Fix IUCV_IPBUFLST-type buffers virtual vs physical address confusion.
This does not fix a bug since virtual and physical address spaces are
currently the same.
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7b432bf376c9c198a7ff48f1ed14a14c0ffbe1fe ]
The unflatten_and_copy_device_tree() function contains a call to
memblock_alloc(). This means that memblock is allocating memory before
any of the reserved memory regions are set aside in the setup_memory()
function which calls early_init_fdt_scan_reserved_mem(). Therefore,
there is a possibility for memblock to allocate from any of the
reserved memory regions.
Hence, move the call to setup_memory() to be earlier in the init
sequence so that the reserved memory regions are set aside before any
allocations are done using memblock.
Signed-off-by: Oreoluwa Babatunde <quic_obabatun@quicinc.com>
Signed-off-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2fdbc20036acda9e5694db74a032d3c605323005 ]
If pnfsd_update_layout() is called on a file for which recovery has
failed it will enter a tight infinite loop.
NFS_LAYOUT_INVALID_STID will be set, nfs4_select_rw_stateid() will
return -EIO, and nfs4_schedule_stateid_recovery() will do nothing, so
nfs4_client_recover_expired_lease() will not wait. So the code will
loop indefinitely.
Break the loop by testing the validity of the open stateid at the top of
the loop.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0889d13b9e1cbef49e802ae09f3b516911ad82a1 ]
When the length check for an icreq sqe fails we should not
continue processing but rather return immediately as all
other contents of that sqe cannot be relied on.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 66626b15636b5f5cf3d7f6104799f77462748974 ]
Initialize debugfs_root to -ENODEV so that if the client never sets a
valid debugfs root the debugfs files will not be created.
A NULL pointer passed to any of the debugfs_create_*() functions means
"create in the root of debugfs". It doesn't mean "ignore".
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://msgid.link/r/20240307105353.40067-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0f0639b4d6f649338ce29c62da3ec0787fa08cd1 ]
This fixes attempting to access past ethhdr.h_source, although it seems
intentional to copy also the contents of h_proto this triggers
out-of-bound access problems with the likes of static analyzer, so this
instead just copy ETH_ALEN and then proceed to use put_unaligned to copy
h_proto separetely.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7e80eb792bd7377a20f204943ac31c77d859be89 ]
The memory allocated for the identification is freed on failure. Set
it to NULL so the caller doesn't have a pointer to that freed address.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 36959d18c3cf09b3c12157c6950e18652067de77 ]
If GET_SEGNO return NULL_SEGNO for some unecpected case,
update_sit_entry will access invalid memory address,
cause system crash. It is better to do sanity check about
GET_SEGNO just like update_segment_mtime & locate_dirty_segment.
Also remove some redundant judgment code.
Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f40a3ea94881f668084f68f6b9931486b1606db0 ]
The BUG_ON is deep in the qgroup code where we can expect that it
exists. A NULL pointer would cause a crash.
It was added long ago in 550d7a2ed5 ("btrfs: qgroup: Add new qgroup
calculation function btrfs_qgroup_account_extents()."). It maybe made
sense back then as the quota enable/disable state machine was not that
robust as it is nowadays, so we can just delete it.
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 56f335e043ae73c32dbb70ba95488845dc0f1e6e ]
There's only one caller of tree_move_down() that does not pass level 0
so the assertion is better suited here.
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e80e3f732cf53c64b0d811e1581470d67f6c3228 ]
Change BUG_ON to a proper error handling in the unlikely case of seeing
data when the command is started. This is supposed to be reset when the
command is finished (send_cmd, send_encoded_extent).
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6fbc6f4ac1f4907da4fc674251527e7dc79ffbf6 ]
The may_destroy_subvol() looks up a root by a key, allowing to do an
inexact search when key->offset is -1. It's never expected to find such
item, as it would break the allowed range of a root id.
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b2136cc288fce2f24a92f3d656531b2d50ebec5a ]
Allocate fs_info and root to have a valid fs_info pointer in case it's
dereferenced by a helper outside of tests, like find_lock_delalloc_range().
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be73f4448b607e6b7ce41cd8ef2214fdf6e7986f ]
The pointer to root is initialized in btrfs_init_delayed_node(), no need
to check for it again. Change the BUG_ON to assertion.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 778e618b8bfedcc39354373c1b072c5fe044fa7b ]
There's a BUG_ON checking for a valid pointer of fs_info::delayed_root
but it is valid since init_mount_fs_info() and has the same lifetime as
fs_info.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f2d5bccaca3e8c09c9b9c8485375f7bdbb2631d2 ]
simple_realloc() frees the original buffer (ptr) even if the
reallocation failed.
Fix it to behave like standard realloc() and only free the original
buffer if the reallocation succeeded.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240229115149.749264-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 69b0194ccec033c208b071e019032c1919c2822d ]
simple_malloc() will return NULL when there is not enough memory left.
Check pointer 'new' before using it to copy the old data.
Signed-off-by: Li zeming <zeming@nfschina.com>
[mpe: Reword subject, use change log from Christophe]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20221219021816.3012-1-zeming@nfschina.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b5590270068c4324dac4a2b5a4a156e02e21339f ]
__netlink_dump_start() releases nlk->cb_mutex right before
calling netlink_dump() which grabs it again.
This seems dangerous, even if KASAN did not bother yet.
Add a @lock_taken parameter to netlink_dump() to let it
grab the mutex if called from netlink_recvmsg() only.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e651f2fae33634175fae956d896277cf916f5d09 ]
The result of the division of new_rate by gt_target_rate can be zero (if
new_rate is smaller than gt_target_rate). Using that result as divisor
without checking can result in a division by zero error. Guard against
this by checking for a zero value earlier.
While here, also change the psv variable to an unsigned long to make
sure we don't overflow the datatype as all other types involved are also
unsiged long.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240225151336.2728533-3-martin.blumenstingl@googlemail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4bea747f3fbec33c16d369b2f51e55981d7c78d0 ]
Since NUM_XMIT_BUFFS is always 1, building m68k with sun3_defconfig and
-Warraybounds, this build warning is visible[1]:
drivers/net/ethernet/i825xx/sun3_82586.c: In function 'sun3_82586_timeout':
drivers/net/ethernet/i825xx/sun3_82586.c:990:122: warning: array subscript 1 is above array bounds of 'volatile struct transmit_cmd_struct *[1]' [-Warray-bounds=]
990 | printk("%s: command-stats: %04x %04x\n",dev->name,swab16(p->xmit_cmds[0]->cmd_status),swab16(p->xmit_cmds[1]->cmd_status));
| ~~~~~~~~~~~~^~~
...
drivers/net/ethernet/i825xx/sun3_82586.c:156:46: note: while referencing 'xmit_cmds'
156 | volatile struct transmit_cmd_struct *xmit_cmds[NUM_XMIT_BUFFS];
Avoid accessing index 1 since it doesn't exist.
Link: https://github.com/KSPP/linux/issues/325 [1]
Cc: Sam Creasey <sammy@sammy.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20240206161651.work.876-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 15fd1dc3dadb4268207fa6797e753541aca09a2a ]
Static FDPIC executable may get an executable stack even when it has
non-executable GNU_STACK segment. This happens when STACK segment has rw
permissions, but does not specify stack size. In that case FDPIC loader
uses permissions of the interpreter's stack, and for static executables
with no interpreter it results in choosing the arch-default permissions
for the stack.
Fix that by using the interpreter's properties only when the interpreter
is actually used.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Link: https://lore.kernel.org/r/20240118150637.660461-1-jcmvbkbc@gmail.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 15126b916e39b0cb67026b0af3c014bfeb1f76b3 ]
cx23885_vdev_init() can return a NULL pointer, but that pointer
is used in the next line without a check.
Add a NULL pointer check and go to the error unwind if it is NULL.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: Sicong Huang <huangsicong@iie.ac.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 05d8f255867e3196565bb31a911a437697fab094 ]
Prior to this change 'on->nr_mmapped' tracked the total number of
mmaps across all of its associated open files via kernfs_fop_mmap().
Thus if the file descriptor associated with a kernfs_open_file was
mmapped 10 times then we would have: 'of->mmapped = true' and
'of_on(of)->nr_mmapped = 10'.
The problem is that closing or draining a 'of->mmapped' file would
only decrement one from the 'of_on(of)->nr_mmapped' counter.
For e.g. we have this from kernfs_unlink_open_file():
if (of->mmapped)
on->nr_mmapped--;
The WARN_ON_ONCE(on->nr_mmapped) in kernfs_drain_open_files() is
easy to reproduce by:
1. opening a (mmap-able) kernfs file.
2. mmap-ing that file more than once (mapping just once masks the issue).
3. trigger a drain of that kernfs file.
Modulo out-of-tree patches I was able to trigger this reliably by
identifying pci device nodes in sysfs that have resource regions
that are mmap-able and that don't have any driver attached to them
(steps 1 and 2). For step 3 we can "echo 1 > remove" to trigger a
kernfs_drain.
Signed-off-by: Neel Natu <neelnatu@google.com>
Link: https://lore.kernel.org/r/20240127234636.609265-1-neelnatu@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 249f374eb9b6b969c64212dd860cc1439674c4a8 ]
dqget() checks whether dquot->dq_sb is set when returning it using
BUG_ON. Firstly this doesn't work as an invalidation check for quite
some time (we release dquot with dq_sb set these days), secondly using
BUG_ON is quite harsh. Use WARN_ON_ONCE and check whether dquot is still
hashed instead.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 053fc4f755ad43cf35210677bcba798ccdc48d0c ]
->permission(), ->get_link() and ->inode_get_acl() might dereference
->s_fs_info (and, in case of ->permission(), ->s_fs_info->fc->user_ns
as well) when called from rcu pathwalk.
Freeing ->s_fs_info->fc is rcu-delayed; we need to make freeing ->s_fs_info
and dropping ->user_ns rcu-delayed too.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 275655d3207b9e65d1561bf21c06a622d9ec1d43 ]
In __afs_break_callback() we might check ->cb_nr_mmap and if it's non-zero
do queue_work(&vnode->cb_work). In afs_drop_open_mmap() we decrement
->cb_nr_mmap and do flush_work(&vnode->cb_work) if it reaches zero.
The trouble is, there's nothing to prevent __afs_break_callback() from
seeing ->cb_nr_mmap before the decrement and do queue_work() after both
the decrement and flush_work(). If that happens, we might be in trouble -
vnode might get freed before the queued work runs.
__afs_break_callback() is always done under ->cb_lock, so let's make
sure that ->cb_nr_mmap can change from non-zero to zero while holding
->cb_lock (the spinlock component of it - it's a seqlock and we don't
need to mess with the counter).
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0e716cec6fb11a14c220ee17c404b67962e902f7 ]
The first command issued from the host to the target is the fabrics
connect command. At this point, neither the target queue nor the
controller have been allocated. But we already try to trace this command
in nvmet_req_init.
Reported by KASAN.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4e58543e7da4859c4ba61d15493e3522b6ad71fd ]
It turns out that the .freeze_super and .thaw_super operations require
the filesystem to manage the superblock refcount itself. We are using
the freeze_super() and thaw_super() helpers to mostly take care of that
for us, but this means that the superblock may no longer be around by
when thaw_super() returns, and gfs2_thaw_super() will then access freed
memory. Take an extra superblock reference in gfs2_thaw_super() to fix
that.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 132d0fd0b8418094c9e269e5bc33bf5b864f4a65 ]
For some controllers such as QCA2066, it does not need to send
HCI_Configure_Data_Path to configure non-HCI data transport path to support
HFP offload, their device drivers may set hdev->get_codec_config_data as
NULL, so Explicitly add this non NULL checking before calling the function.
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4265eb062a7303e537ab3792ade31f424c3c5189 ]
Without visibility into the initializers for data->innr, GCC suspects
using it as an index could walk off the end of the various 14-element
arrays in data. Perform an explicit clamp to the array size. Silences
the following warning with GCC 12+:
../drivers/hwmon/pc87360.c: In function 'pc87360_update_device':
../drivers/hwmon/pc87360.c:341:49: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
341 | data->in_max[i] = pc87360_read_value(data,
| ~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
342 | LD_IN, i,
| ~~~~~~~~~
343 | PC87365_REG_IN_MAX);
| ~~~~~~~~~~~~~~~~~~~
../drivers/hwmon/pc87360.c:209:12: note: at offset 255 into destination object 'in_max' of size 14
209 | u8 in_max[14]; /* Register value */
| ^~~~~~
Cc: Jim Cromie <jim.cromie@gmail.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-hwmon@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20231130200207.work.679-kees@kernel.org
[groeck: Added comment into code clarifying context]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
