The device and fwnode property API supports Devicetree, ACPI and pset
properties. The implementation of this functionality for each firmware
type was embedded in the fwnode property core. Move it out to firmware
type specific locations, making it easier to maintain.
Depends-on: ("of: Move OF property and graph API from base.c to property.c")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit 3708184afc)
Signed-off-by: Brian J Lovin <brian.j.lovin@intel.com>
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Conflicts:
include/linux/acpi.h
(Drop update to acpi_alloc_fwnode_static() which is neither present nor used
anywhere in this version.)
BUG=b:64133998
TEST=media device topology shows subdevs registered successfully
TEST=no camera regression
Change-Id: Ie432874df71c4af26ab0bd011145b6a120b88f8b
Reviewed-on: https://chromium-review.googlesource.com/693676
Commit-Ready: Tomasz Figa <tfiga@chromium.org>
Tested-by: Hyungwoo Yang <hyungwoo.yang@intel.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com>
Add a new set of array reading functions that take a minimum and
maximum size limit and will fail if the property size is not within
the size limits. This makes it more convenient for drivers that
use variable-size DT arrays which must be bounded at both ends -
data must be at least N entries but must not overflow the array
it is being copied into. It is also more efficient than making this
functionality out of existing public functions and avoids duplication.
The existing array functions have been left in the API, since there
are a very large number of clients of those functions and their
existing functionality is still useful. This avoids turning a small
API improvement into a major kernel rework.
The old functions have been turned into mininmal static inlines calling
the new functions. The old functions had no upper limit on the actual
size of the dts entry, to preserve this functionality rather than keeping
two near-identical implementations, if the new function is called with
max=0 there is no limit on the size of the dts entry but only the min
number of elements are read.
Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Signed-off-by: Rob Herring <robh@kernel.org>
(cherry picked from commit a67e9472da)
Signed-off-by: Brian J Lovin <brian.j.lovin@intel.com>
Conflicts:
include/linux/of.h
(purely contextual conflict)
BUG=b:64133998
TEST=media device topology shows subdevs registered successfully
TEST=no camera regression
Change-Id: Ic1c6b8668b6e97cf60b04539571a747914f31994
Reviewed-on: https://chromium-review.googlesource.com/692693
Commit-Ready: Tomasz Figa <tfiga@chromium.org>
Tested-by: Hyungwoo Yang <hyungwoo.yang@intel.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com>
This driver is used to detect ACC and car reverse signal
on vehicle system
Change-Id: I74bedfe64ddb6a0f8eaf7ae8c7af74763ee8bf75
Signed-off-by: Kaige Li <kevin.li@rock-chips.com>
A default timeout value of 125 ms should work for all decoders.
Declare a constant to help standardize its' use.
Signed-off-by: Eric Nelson <eric@nelint.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
(cherry picked from commit c8e1bbc52d)
Change-Id: I672091f1902c3a91c9746dbfd8438896f7c9433d
Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com>
Add the SCLK_I2S_PRE and SCLK_I2S_FRAC id for i2s sclk.
Change-Id: Ic66291f2a76ec5c2a47e9721ad6f37922264fd42
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
When printk to pstore console, we ignore log level. So
/sys/fs/pstore/console-ramoops-0 should keep full kernel log.
Change-Id: I87ea3418741c117523a9e872ae7ace4dac0cd9d3
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
1) coding style
2) gsensor calibration by user
3) make sensor rate setting effective
Change-Id: I123674ad2fde72b0aa84e6135669ce1f44d5229d
Signed-off-by: Zorro Liu <lyx@rock-chips.com>
HDR_PANEL_METADATA is used to indicate HDR capacity of sink device.
Change-Id: I598a7bb5634f14b57f94135fd3be6b0ad2075116
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
The blob_id is used to get blob data of hdr_source_metadata_property.
Change-Id: I8383265e50261438cf8484bd731e42fc23c24c51
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
Many drivers have a common pattern of searching the OF graph for either an
attached panel or bridge and then finding the DRM struct for the panel
or bridge. Also, most drivers need to handle deferred probing when the
DRM device is not yet instantiated. Create a common function,
drm_of_find_panel_or_bridge, to find the connected node and the
associated DRM panel or bridge device.
(cherry picked from commit 1f2db3034c)
Change-Id: Ibda889742bfb0ea53181ed2ef9b19a9d9df3303e
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
[seanpaul dropped extern from drm_of.h]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
The OF graph API leaves too much of the graph walking to clients when
in many cases the driver doesn't care about accessing the port or
endpoint nodes. The drivers typically just want the device connected via
a particular graph connection. of_graph_get_remote_node provides this
functionality.
(cherry picked from commit b85ad49409)
Change-Id: Iaee6a0f3c176d43d4bc6225f195aaaff1e7b419a
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
In the (very) small print of the REPORT_CURRENT_LATENCY message there is a
line that says that the last byte of the message (audio out delay) is only
present if the 'audio out compensated' value is 3.
I missed this, and so if this message was sent with a total length of 6 (i.e.
without the audio out delay byte), then it was rejected by the framework
since a minimum length of 7 was expected.
Fix this minimum length check and update the wrappers in cec-funcs.h to do
the right thing based on the message length.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
(cherry picked from commit f3854973f1)
Change-Id: Iec4d9db94bb66194ec68c014a06f8b2d33f1dbdb
Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>
The cec_allocate_adapter function doesn't need the parent device, only the
cec_register_adapter function needs it.
Drop the cec_devnode parent field, since devnode.dev.parent can be used
instead.
This change makes the framework consistent with other frameworks where the
parent device is not used until the device is registered.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
(cherry picked from commit f51e80804f)
Change-Id: Ib9a26eedf0e07f5964482d8cbb2c4698031d7bd9
Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>
The last open issues have been addressed, so it is time to move
this out of staging and into the mainline and to move the public
cec headers to include/uapi/linux.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
(cherry picked from commit 0dbacebede)
Change-Id: I7bf14806f5043a2565328fa715cf44fe2b4ad713
Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>
This lock will be used to protect more than just the fhs list.
So rename it to just 'lock'.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
(cherry picked from commit 62148f0930)
Change-Id: Ib8f66aec21134ffe333afc3d7d926d1c0844798d
Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>
The size of the transmit queue was unlimited, which meant that
in non-blocking mode you could flood the CEC adapter with messages
to be transmitted.
Limit this to 18 messages.
Also print the number of pending transmits and the timeout value
in the status debugfs file.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
(cherry picked from commit 11065f8531)
Change-Id: I1d143e076ed8a4708a3e6240faf41c6434367d11
Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>
The added HDMI CEC framework provides a generic kernel interface for
HDMI CEC devices.
Note that the CEC framework is added to staging/media and that the
cec.h and cec-funcs.h headers are not exported yet. While the kABI
is mature, I would prefer to allow the uABI some more time before
it is mainlined in case it needs more tweaks.
This adds the cec-core.c, media/cec.h and cec-priv.h sources.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
[k.debski@samsung.com: Merged CEC Updates commit by Hans Verkuil]
[k.debski@samsung.com: Merged Update author commit by Hans Verkuil]
[k.debski@samsung.com: code cleanup and fixes]
[k.debski@samsung.com: add missing CEC commands to match spec]
[k.debski@samsung.com: add RC framework support]
[k.debski@samsung.com: move and edit documentation]
[k.debski@samsung.com: add vendor id reporting]
[k.debski@samsung.com: reorder of API structs and add reserved fields]
[k.debski@samsung.com: fix handling of events and fix 32/64bit timespec problem]
[k.debski@samsung.com: add sequence number handling]
[k.debski@samsung.com: add passthrough mode]
[k.debski@samsung.com: fix CEC defines, add missing CEC 2.0 commands]
Signed-off-by: Kamil Debski <kamil@wypas.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
(cherry picked from commit a56960e8b4)
Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>
Change-Id: I3063b08b8b818501a683f701d014533bc533d163
Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>
The cec-edid module contains helper functions to find and manipulate
the CEC physical address inside an EDID. Even if the CEC support itself
is disabled, drivers will still need these functions. Which is the
reason this is module is separate from the upcoming CEC framework.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
(cherry picked from commit 29fb44a58a)
Change-Id: Id59a72db27d140abee0e0bb98b062a7131de7263
Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>
Functions which the compiler has instrumented for ASAN place poison on
the stack shadow upon entry and remove this poison prior to returning.
In some cases (e.g. hotplug and idle), CPUs may exit the kernel a
number of levels deep in C code. If there are any instrumented
functions on this critical path, these will leave portions of the idle
thread stack shadow poisoned.
If a CPU returns to the kernel via a different path (e.g. a cold
entry), then depending on stack frame layout subsequent calls to
instrumented functions may use regions of the stack with stale poison,
resulting in (spurious) KASAN splats to the console.
Contemporary GCCs always add stack shadow poisoning when ASAN is
enabled, even when asked to not instrument a function [1], so we can't
simply annotate functions on the critical path to avoid poisoning.
Instead, this series explicitly removes any stale poison before it can
be hit. In the common hotplug case we clear the entire stack shadow in
common code, before a CPU is brought online.
On architectures which perform a cold return as part of cpu idle may
retain an architecture-specific amount of stack contents. To retain the
poison for this retained context, the arch code must call the core KASAN
code, passing a "watermark" stack pointer value beyond which shadow will
be cleared. Architectures which don't perform a cold return as part of
idle do not need any additional code.
This patch (of 3):
Functions which the compiler has instrumented for KASAN place poison on
the stack shadow upon entry and remove this poision prior to returning.
In some cases (e.g. hotplug and idle), CPUs may exit the kernel a number
of levels deep in C code. If there are any instrumented functions on this
critical path, these will leave portions of the stack shadow poisoned.
If a CPU returns to the kernel via a different path (e.g. a cold entry),
then depending on stack frame layout subsequent calls to instrumented
functions may use regions of the stack with stale poison, resulting in
(spurious) KASAN splats to the console.
To avoid this, we must clear stale poison from the stack prior to
instrumented functions being called. This patch adds functions to the
KASAN core for removing poison from (portions of) a task's stack. These
will be used by subsequent patches to avoid problems with hotplug and
idle.
Change-Id: I0cfdd3ece4cb59876292f5ba1cadcdbda19de758
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
(cherry picked from commit e3ae116339)
Instead of letting drivers fill in device_caps at querycap time,
let them fill it in when the video device is registered.
This has the advantage that in the future the v4l2 core can access
the video device's capabilities and take decisions based on that.
(am from 7bbe781329)
Change-Id: I2cc64fc2e562f7def0bea07c9b53a39ba4d772c3
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The V4L2_BUF_TYPE_META_OUTPUT mirrors the V4L2_BUF_TYPE_META_CAPTURE with
the exception that it is an OUTPUT type. The use case for this is to pass
buffers to the device that are not image data but metadata. The formats,
just as the metadata capture formats, are typically device specific and
highly structured.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
(am from https://patchwork.linuxtv.org/patch/43308/)
Conflicts:
drivers/media/v4l2-core/v4l2-ioctl.c
include/media/v4l2-ioctl.h
BUG=b:66317170
TEST=compile
Change-Id: I86495fe82bf8dbddbc40f0ee1eb8e21145f427d3
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/676768
Reviewed-by: Ricky Liang <jcliang@chromium.org>
Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com>
The metadata buffer type is used to transfer metadata between userspace
and kernelspace through a V4L2 buffers queue. It comes with a new
metadata capture capability and format description.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
[hans.verkuil@cisco.com: removed left-over 'experimental' note]
[hans.verkuil@cisco.com: add newline after _v4l2-meta-format label]
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
(cherry picked from commit fb9ffa6a7f)
Conflicts:
Documentation/media/uapi/v4l/buffer.rst
Documentation/media/uapi/v4l/devices.rst
Documentation/media/uapi/v4l/vidioc-querycap.rst
Documentation/media/videodev2.h.rst.exceptions
drivers/media/v4l2-core/v4l2-dev.c
drivers/media/v4l2-core/videobuf2-v4l2.c
include/media/v4l2-ioctl.h
Deleted the documentation, as 4.4 is before the conversion to rst.
BUG=b:66317170
TEST=compile
Change-Id: Id43757c0a0b1f34e10d17e5345f89ded25503d13
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/676767
Reviewed-by: Ricky Liang <jcliang@chromium.org>
Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com>
According to a description from TRM, add all the power domains.
Change-Id: Id21e1b51825f7cc94e194e164583ed2584743104
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
The hdr_panel_metadata indicate sink HDR capability，moving
it to drm_hdmi_info is more reasonable.
Change-Id: I0ccd404cfb0ec1e74130b0692de4261ae9a24c8f
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
Enable Dynamic Range and Mastering Infoframe for HDR
content, which is defined in CEA 861.3 spec.
The metadata will be computed based on blending
policy in userspace compositors and passed as a connector
property blob to driver. The same will be sent as infoframe
to panel which support HDR.
Change-Id: I8025c3dba43dc5bb614115ede7841fe89d9f4d0b
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
(am from https://patchwork.kernel.org/patch/9756447/)
According to HDMI2.0 spec table 10-6, DC_48bit_420/DC_36bit_420/
DC_30bit_420 is at bit2~bit0 of HDMI Fortum Vendor Specific Data
Block byte7.
Change-Id: Iab2748695c68b950617955132579a3c12476cc5b
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
Due to hardware issue, boost and otg switch must be conctrolled
with special timing carefully by rk816 battery driver. Otherwise
boost maybe burn off.
Change-Id: Id28208c5b9757e1ff0e57ec5d26f1ac0afb88ad5
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
