As Jungyeon reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=203227
- Overview
When mounting the attached crafted image, following errors are reported.
Additionally, it hangs on sync after trying to mount it.
The image is intentionally fuzzed from a normal f2fs image for testing.
Compile options for F2FS are as follows.
CONFIG_F2FS_FS=y
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
CONFIG_F2FS_CHECK_FS=y
- Reproduces
mkdir test
mount -t f2fs tmp.img test
sync
- Messages
kernel BUG at fs/f2fs/recovery.c:549!
RIP: 0010:recover_data+0x167a/0x1780
Call Trace:
f2fs_recover_fsync_data+0x613/0x710
f2fs_fill_super+0x1043/0x1aa0
mount_bdev+0x16d/0x1a0
mount_fs+0x4a/0x170
vfs_kern_mount+0x5d/0x100
do_mount+0x200/0xcf0
ksys_mount+0x79/0xc0
__x64_sys_mount+0x1c/0x20
do_syscall_64+0x43/0xf0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
During recovery, if ofs_of_node is inconsistent in between recovered
node page and original checkpointed node page, let's just fail recovery
instead of making kernel panic.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As Jungyeon reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=203225
- Overview
When mounting the attached crafted image and unmounting it, following errors are reported.
Additionally, it hangs on sync after unmounting.
The image is intentionally fuzzed from a normal f2fs image for testing.
Compile options for F2FS are as follows.
CONFIG_F2FS_FS=y
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
CONFIG_F2FS_CHECK_FS=y
- Reproduces
mkdir test
mount -t f2fs tmp.img test
touch test/t
umount test
sync
- Messages
kernel BUG at fs/f2fs/node.c:3073!
RIP: 0010:f2fs_destroy_node_manager+0x2f0/0x300
Call Trace:
f2fs_put_super+0xf4/0x270
generic_shutdown_super+0x62/0x110
kill_block_super+0x1c/0x50
kill_f2fs_super+0xad/0xd0
deactivate_locked_super+0x35/0x60
cleanup_mnt+0x36/0x70
task_work_run+0x75/0x90
exit_to_usermode_loop+0x93/0xa0
do_syscall_64+0xba/0xf0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0010:f2fs_destroy_node_manager+0x2f0/0x300
NAT table is corrupted, so reserved meta/node inode ids were added into
free list incorrectly, during file creation, since reserved id has cached
in inode hash, so it fails the creation and preallocated nid can not be
released later, result in kernel panic.
To fix this issue, let's do nid boundary check during free nid loading.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As Jungyeon reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=203221
- Overview
When mounting the attached crafted image and running program, this error is reported.
The image is intentionally fuzzed from a normal f2fs image for testing and I enabled option CONFIG_F2FS_CHECK_FS on.
- Reproduces
cc poc_07.c
mkdir test
mount -t f2fs tmp.img test
cp a.out test
cd test
sudo ./a.out
- Messages
kernel BUG at fs/f2fs/node.c:1279!
RIP: 0010:read_node_page+0xcf/0xf0
Call Trace:
__get_node_page+0x6b/0x2f0
f2fs_iget+0x8f/0xdf0
f2fs_lookup+0x136/0x320
__lookup_slow+0x92/0x140
lookup_slow+0x30/0x50
walk_component+0x1c1/0x350
path_lookupat+0x62/0x200
filename_lookup+0xb3/0x1a0
do_fchmodat+0x3e/0xa0
__x64_sys_chmod+0x12/0x20
do_syscall_64+0x43/0xf0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
On below paths, we can have opportunity to readahead inode page
- gc_node_segment -> f2fs_ra_node_page
- gc_data_segment -> f2fs_ra_node_page
- f2fs_fill_dentries -> f2fs_ra_node_page
Unlike synchronized read, on readahead path, we can set page uptodate
before verifying page's checksum, then read_node_page() will trigger
kernel panic once it encounters a uptodated page w/ incorrect checksum.
So considering readahead scenario, we have to do checksum each time
when loading inode page even if it is uptodated.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As Jungyeon reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=203219
- Overview
When mounting the attached crafted image and running program, I got this error.
Additionally, it hangs on sync after running the program.
The image is intentionally fuzzed from a normal f2fs image for testing and I enabled option CONFIG_F2FS_CHECK_FS on.
- Reproduces
cc poc_06.c
mkdir test
mount -t f2fs tmp.img test
cp a.out test
cd test
sudo ./a.out
sync
- Messages
kernel BUG at fs/f2fs/node.c:1183!
RIP: 0010:f2fs_remove_inode_page+0x294/0x2d0
Call Trace:
f2fs_evict_inode+0x2a3/0x3a0
evict+0xba/0x180
__dentry_kill+0xbe/0x160
dentry_kill+0x46/0x180
dput+0xbb/0x100
do_renameat2+0x3c9/0x550
__x64_sys_rename+0x17/0x20
do_syscall_64+0x43/0xf0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
The reason is f2fs_remove_inode_page() will trigger kernel panic due to
inconsistent i_blocks value of inode.
To avoid panic, let's just print debug message and set SBI_NEED_FSCK to
give a hint to fsck for latter repairing of potential image corruption.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: fix build warning and add unlikely]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As Jungyeon reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=203217
- Overview
When mounting the attached crafted image and running program, I got this error.
Additionally, it hangs on sync after running the program.
The image is intentionally fuzzed from a normal f2fs image for testing and I enabled option CONFIG_F2FS_CHECK_FS on.
- Reproduces
cc poc_test_05.c
mkdir test
mount -t f2fs tmp.img test
sudo ./a.out
sync
- Messages
kernel BUG at fs/f2fs/inode.c:707!
RIP: 0010:f2fs_evict_inode+0x33f/0x3a0
Call Trace:
evict+0xba/0x180
f2fs_iget+0x598/0xdf0
f2fs_lookup+0x136/0x320
__lookup_slow+0x92/0x140
lookup_slow+0x30/0x50
walk_component+0x1c1/0x350
path_lookupat+0x62/0x200
filename_lookup+0xb3/0x1a0
do_readlinkat+0x56/0x110
__x64_sys_readlink+0x16/0x20
do_syscall_64+0x43/0xf0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
During inode loading, __recover_inline_status() can recovery inode status
and set inode dirty, once we failed in following process, it will fail
the check in f2fs_evict_inode, result in trigger BUG_ON().
Let's clear dirty inode in error path of f2fs_iget() to avoid panic.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Just removing '\n' in f2fs_msg(, "\n") to avoid redundant new blank line.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch changes codes as below:
- don't use is_read_io() as a condition to judge the meta IO.
- use .is_por to replace .is_meta to indicate IO is from recovery explicitly.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As Jungyeon reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=203213
- Overview
When mounting the attached crafted image and running program, I got this error.
Additionally, it hangs on sync after running the this script.
The image is intentionally fuzzed from a normal f2fs image for testing and I enabled option CONFIG_F2FS_CHECK_FS on.
- Reproduces
mkdir test
mount -t f2fs tmp.img test
cp a.out test
cd test
sudo ./a.out
sync
kernel BUG at fs/f2fs/f2fs.h:2012!
RIP: 0010:truncate_node+0x2c9/0x2e0
Call Trace:
f2fs_truncate_xattr_node+0xa1/0x130
f2fs_remove_inode_page+0x82/0x2d0
f2fs_evict_inode+0x2a3/0x3a0
evict+0xba/0x180
__dentry_kill+0xbe/0x160
dentry_kill+0x46/0x180
dput+0xbb/0x100
do_renameat2+0x3c9/0x550
__x64_sys_rename+0x17/0x20
do_syscall_64+0x43/0xf0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
The reason is dec_valid_node_count() will trigger kernel panic due to
inconsistent count in between inode.i_blocks and actual block.
To avoid panic, let's just print debug message and set SBI_NEED_FSCK to
give a hint to fsck for latter repairing.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: fix build warning and add unlikely]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As Jungyeon reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=203209
- Overview
When mounting the attached crafted image and running program, I got this error.
Additionally, it hangs on sync after the this script.
The image is intentionally fuzzed from a normal f2fs image for testing and I enabled option CONFIG_F2FS_CHECK_FS on.
- Reproduces
cc poc_01.c
./run.sh f2fs
sync
kernel BUG at fs/f2fs/f2fs.h:1788!
RIP: 0010:f2fs_truncate_data_blocks_range+0x342/0x350
Call Trace:
f2fs_truncate_blocks+0x36d/0x3c0
f2fs_truncate+0x88/0x110
f2fs_setattr+0x3e1/0x460
notify_change+0x2da/0x400
do_truncate+0x6d/0xb0
do_sys_ftruncate+0xf1/0x160
do_syscall_64+0x43/0xf0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
The reason is dec_valid_block_count() will trigger kernel panic due to
inconsistent count in between inode.i_blocks and actual block.
To avoid panic, let's just print debug message and set SBI_NEED_FSCK to
give a hint to fsck for latter repairing.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: fix build warning and add unlikely]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
With below mkfs and mount option:
MKFS_OPTIONS -- -O extra_attr -O project_quota -O inode_checksum -O flexible_inline_xattr -O inode_crtime -f
MOUNT_OPTIONS -- -o noinline_xattr
We may miss xattr data with below testcase:
- mkdir dir
- setfattr -n "user.name" -v 0 dir
- for ((i = 0; i < 190; i++)) do touch dir/$i; done
- umount
- mount
- getfattr -n "user.name" dir
user.name: No such attribute
The root cause is that we persist xattr data into reserved inline xattr
space, even if inline_xattr is not enable in inline directory inode, after
inline dentry conversion, reserved space no longer exists, so that xattr
data missed.
Let's use inline xattr space only if inline_xattr flag is set on inode
to fix this iusse.
Fixes: 6afc662e68 ("f2fs: support flexible inline xattr size")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
With below mkfs and mount option, generic/339 of fstest will report that
scratch image becomes corrupted.
MKFS_OPTIONS -- -O extra_attr -O project_quota -O inode_checksum -O flexible_inline_xattr -O inode_crtime -f /dev/zram1
MOUNT_OPTIONS -- -o acl,user_xattr -o discard,noinline_xattr /dev/zram1 /mnt/scratch_f2fs
[ASSERT] (f2fs_check_dirent_position:1315) --> Wrong position of dirent pino:1970, name: (...)
level:8, dir_level:0, pgofs:951, correct range:[900, 901]
In old kernel, inline data and directory always reserved 200 bytes in
inode layout, even if inline_xattr is disabled, then new kernel tries
to retrieve that space for non-inline xattr inode, but for inline dentry,
its layout size should be fixed, so we just keep that reserved space.
But the problem here is that, after inline dentry conversion, inline
dentry layout no longer exists, if we still reserve inline xattr space,
after dents updates, there will be a hole in inline xattr space, which
can break hierarchy hash directory structure.
This patch fixes this issue by retrieving inline xattr space after
inline dentry conversion.
Fixes: 6afc662e68 ("f2fs: support flexible inline xattr size")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
There are some places in where we missed to unlock page or unlock page
incorrectly, fix them.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As Jungyeon reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=203211
- Overview
When mounting the attached crafted image and making a new file, I got this error and the error messages keep repeating.
The image is intentionally fuzzed from a normal f2fs image for testing and I run with option CONFIG_F2FS_CHECK_FS on.
- Reproduces
mkdir test
mount -t f2fs tmp.img test
cd test
touch t
- Messages
[ 58.820451] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.821485] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.822530] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.823571] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.824616] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.825640] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.826663] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.827698] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.828719] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.829759] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.830783] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.831828] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.832869] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.833888] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.834945] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.835996] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.837028] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.838051] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.839072] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.840100] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.841147] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.842186] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.843214] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.844267] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.845282] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.846305] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.847341] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
... (repeating)
During GC, if segment type stored in SSA and SIT is inconsistent, we just
skip migrating current segment directly, since we need to know the exact
type to decide the migration function we use.
So in foreground GC, we will easily run into a infinite loop as we may
select the same victim segment which has inconsistent type due to greedy
policy. In order to end up this, we choose to shutdown filesystem. For
backgrond GC, we need to do that as well, so that we can avoid latter
potential infinite looped foreground GC.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Commit af033b2aa8 ("f2fs: guarantee journalled quota data by checkpoint")
added function is_journalled_quota() in f2fs.h, but it located outside of
_LINUX_F2FS_H macro coverage, it has been fixed with commit 0af725fcb7
("f2fs: fix wrong #endif").
But anyway, in order to avoid making same mistake latter, let's add single
line comment to notice which #if the last #endif is corresponding to.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: Remove unnecessary empty EOL]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As Hagbard Celine reported:
Hi, this is a long standing bug that I've hit before on older kernels,
but I was not able to get the syslog saved because of the nature of
the bug. This time I had booted form a pen-drive, and was able to save
the log to it's efi-partition.
What i did to trigger it was to create a partition and format it f2fs,
then mount it with options:
"rw,relatime,lazytime,background_gc=on,disable_ext_identify,discard,heap,user_xattr,inline_xattr,acl,inline_data,inline_dentry,flush_merge,data_flush,extent_cache,mode=adaptive,active_logs=6,whint_mode=fs-based,alloc_mode=default,fsync_mode=strict".
Then I unpacked a big .tar.xz to the partition (I used a
gentoo-stage3-tarball as I was in process of installing Gentoo).
Same options just without data_flush gives no problems.
Mar 20 20:54:01 usbgentoo kernel: FAT-fs (nvme0n1p4): Volume was not
properly unmounted. Some data may be corrupt. Please run fsck.
Mar 20 21:05:23 usbgentoo kernel: kworker/dying (1588) used greatest
stack depth: 12064 bytes left
Mar 20 21:06:40 usbgentoo kernel: BUG: stack guard page was hit at
00000000a4b0733c (stack is 0000000056016422..0000000096e7463f)
Mar 20 21:06:40 usbgentoo kernel: kernel stack overflow
......
Mar 20 21:06:40 usbgentoo kernel: Call Trace:
Mar 20 21:06:40 usbgentoo kernel: read_node_page+0x71/0xf0
Mar 20 21:06:40 usbgentoo kernel: ? xas_load+0x8/0x50
Mar 20 21:06:40 usbgentoo kernel: __get_node_page+0x73/0x2a0
Mar 20 21:06:40 usbgentoo kernel: f2fs_get_dnode_of_data+0x34e/0x580
Mar 20 21:06:40 usbgentoo kernel: f2fs_write_inline_data+0x5e/0x2a0
Mar 20 21:06:40 usbgentoo kernel: __write_data_page+0x421/0x690
Mar 20 21:06:40 usbgentoo kernel: f2fs_write_cache_pages+0x1cf/0x460
Mar 20 21:06:40 usbgentoo kernel: f2fs_write_data_pages+0x2b3/0x2e0
Mar 20 21:06:40 usbgentoo kernel: ? f2fs_inode_chksum_verify+0x1d/0xc0
Mar 20 21:06:40 usbgentoo kernel: ? read_node_page+0x71/0xf0
Mar 20 21:06:40 usbgentoo kernel: do_writepages+0x3c/0xd0
Mar 20 21:06:40 usbgentoo kernel: __filemap_fdatawrite_range+0x7c/0xb0
Mar 20 21:06:40 usbgentoo kernel: f2fs_sync_dirty_inodes+0xf2/0x200
Mar 20 21:06:40 usbgentoo kernel: f2fs_balance_fs_bg+0x2a3/0x2c0
Mar 20 21:06:40 usbgentoo kernel: ? f2fs_inode_dirtied+0x21/0xc0
Mar 20 21:06:40 usbgentoo kernel: f2fs_balance_fs+0xd6/0x2b0
Mar 20 21:06:40 usbgentoo kernel: __write_data_page+0x4fb/0x690
......
Mar 20 21:06:40 usbgentoo kernel: __writeback_single_inode+0x2a1/0x340
Mar 20 21:06:40 usbgentoo kernel: ? soft_cursor+0x1b4/0x220
Mar 20 21:06:40 usbgentoo kernel: writeback_sb_inodes+0x1d5/0x3e0
Mar 20 21:06:40 usbgentoo kernel: __writeback_inodes_wb+0x58/0xa0
Mar 20 21:06:40 usbgentoo kernel: wb_writeback+0x250/0x2e0
Mar 20 21:06:40 usbgentoo kernel: ? 0xffffffff8c000000
Mar 20 21:06:40 usbgentoo kernel: ? cpumask_next+0x16/0x20
Mar 20 21:06:40 usbgentoo kernel: wb_workfn+0x2f6/0x3b0
Mar 20 21:06:40 usbgentoo kernel: ? __switch_to_asm+0x40/0x70
Mar 20 21:06:40 usbgentoo kernel: process_one_work+0x1f5/0x3f0
Mar 20 21:06:40 usbgentoo kernel: worker_thread+0x28/0x3c0
Mar 20 21:06:40 usbgentoo kernel: ? rescuer_thread+0x330/0x330
Mar 20 21:06:40 usbgentoo kernel: kthread+0x10e/0x130
Mar 20 21:06:40 usbgentoo kernel: ? kthread_create_on_node+0x60/0x60
Mar 20 21:06:40 usbgentoo kernel: ret_from_fork+0x35/0x40
The root cause is that we run into an infinite recursive calling in
between f2fs_balance_fs_bg and writepage() as described below:
- f2fs_write_data_pages --- A
- __write_data_page
- f2fs_balance_fs
- f2fs_balance_fs_bg --- B
- f2fs_sync_dirty_inodes
- filemap_fdatawrite
- f2fs_write_data_pages --- A
...
- f2fs_balance_fs_bg --- B
...
In order to fix this issue, let's detect such condition in __write_data_page()
and just skip calling f2fs_balance_fs() recursively.
Reported-by: Hagbard Celine <hagbardcelin@gmail.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
f2fs_hw_support_discard() only tests if the super block device supports
discard. However, for a multi-device volume, not all disks used may
support discard. Improve the check performed to test all devices of
the volume and report discard as supported if at least one device of
the volume supports discard. To implement this, introduce the helper
function f2fs_bdev_support_discard(), which returns true for zoned block
devices (where discard is processed as a zone reset) and for regular
disks supporting the discard command.
f2fs_bdev_support_discard() is also used in __queue_discard_cmd() to
handle discard command issuing for a particular device of the volume.
That is, prevent issuing a discard command for block devices that do
not support it.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
For zoned block devices, an array of zone types for each device is
allocated and initialized in order to determine if a section is stored
on a sequential zone (zone reset needed) or a conventional zone (no
zone reset needed and regular discard applies). Considering this usage,
the zone types stored in memory can be replaced with a bitmap to
indicate an equivalent information, that is, if a zone is sequential or
not. This reduces the memory usage for each zoned device by roughly 8:
on a 14TB disk with zones of 256 MB, the zone type array consumes
13x4KB pages while the bitmap uses only 2x4KB pages.
This patch changes the f2fs_dev_info structure blkz_type field to the
bitmap blkz_seq. Access to this bitmap is done using the helper
function f2fs_blkz_is_seq(), which is a rewrite of the function
get_blkz_type().
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
For a single device mount using a zoned block device, the zone
information for the device is stored in the sbi->devs single entry
array and sbi->s_ndevs is set to 1. This differs from a single device
mount using a regular block device which does not allocate sbi->devs
and sets sbi->s_ndevs to 0.
However, sbi->s_devs == 0 condition is used throughout the code to
differentiate a single device mount from a multi-device mount where
sbi->s_ndevs is always larger than 1. This results in problems with
single zoned block device volumes as these are treated as multi-device
mounts but do not have the start_blk and end_blk information set. One
of the problem observed is skipping of zone discard issuing resulting in
write commands being issued to full zones or unaligned to a zone write
pointer.
Fix this problem by simply treating the cases sbi->s_ndevs == 0 (single
regular block device mount) and sbi->s_ndevs == 1 (single zoned block
device mount) in the same manner. This is done by introducing the
helper function f2fs_is_multi_device() and using this helper in place
of direct tests of sbi->s_ndevs value, improving code readability.
Fixes: 7bb3a371d1 ("f2fs: Fix zoned block device support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In order to have a common code base for fscrypt "post read" processing
for all filesystems which support encryption, this commit removes
filesystem specific build config option (e.g. CONFIG_EXT4_FS_ENCRYPTION)
and replaces it with a build option (i.e. CONFIG_FS_ENCRYPTION) whose
value affects all the filesystems making use of fscrypt.
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
This commit removes the f2fs specific f2fs_encrypted_inode() and makes
use of the generic IS_ENCRYPTED() macro to check for the encryption
status of an inode.
Acked-by: Chao Yu <yuchao0@huawei.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
This commit removes the ext4 specific ext4_encrypted_inode() and makes
use of the generic IS_ENCRYPTED() macro to check for the encryption
status of an inode.
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Currently, trying to rename or link a regular file, directory, or
symlink into an encrypted directory fails with EPERM when the source
file is unencrypted or is encrypted with a different encryption policy,
and is on the same mountpoint. It is correct for the operation to fail,
but the choice of EPERM breaks tools like 'mv' that know to copy rather
than rename if they see EXDEV, but don't know what to do with EPERM.
Our original motivation for EPERM was to encourage users to securely
handle their data. Encrypting files by "moving" them into an encrypted
directory can be insecure because the unencrypted data may remain in
free space on disk, where it can later be recovered by an attacker.
It's much better to encrypt the data from the start, or at least try to
securely delete the source data e.g. using the 'shred' program.
However, the current behavior hasn't been effective at achieving its
goal because users tend to be confused, hack around it, and complain;
see e.g. https://github.com/google/fscrypt/issues/76. And in some cases
it's actually inconsistent or unnecessary. For example, 'mv'-ing files
between differently encrypted directories doesn't work even in cases
where it can be secure, such as when in userspace the same passphrase
protects both directories. Yet, you *can* already 'mv' unencrypted
files into an encrypted directory if the source files are on a different
mountpoint, even though doing so is often insecure.
There are probably better ways to teach users to securely handle their
files. For example, the 'fscrypt' userspace tool could provide a
command that migrates unencrypted files into an encrypted directory,
acting like 'shred' on the source files and providing appropriate
warnings depending on the type of the source filesystem and disk.
Receiving errors on unimportant files might also force some users to
disable encryption, thus making the behavior counterproductive. It's
desirable to make encryption as unobtrusive as possible.
Therefore, change the error code from EPERM to EXDEV so that tools
looking for EXDEV will fall back to a copy.
This, of course, doesn't prevent users from still doing the right things
to securely manage their files. Note that this also matches the
behavior when a file is renamed between two project quota hierarchies;
so there's precedent for using EXDEV for things other than mountpoints.
xfstests generic/398 will require an update with this change.
[Rewritten from an earlier patch series by Michael Halcrow.]
Cc: Michael Halcrow <mhalcrow@google.com>
Cc: Joe Richey <joerichey@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
fscrypt doesn't use the CTR mode of operation for anything, so there's
no need to select CRYPTO_CTR. It was added by commit 71dea01ea2
("ext4 crypto: require CONFIG_CRYPTO_CTR if ext4 encryption is
enabled"). But, I've been unable to identify the arm64 crypto bug it
was supposedly working around.
I suspect the issue was seen only on some old Android device kernel
(circa 3.10?). So if the fix wasn't mistaken, the real bug is probably
already fixed. Or maybe it was actually a bug in a non-upstream crypto
driver.
So, remove the dependency. If it turns out there's actually still a
bug, we'll fix it properly.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Add support for the Adiantum encryption mode to fscrypt. Adiantum is a
tweakable, length-preserving encryption mode with security provably
reducible to that of XChaCha12 and AES-256, subject to a security bound.
It's also a true wide-block mode, unlike XTS. See the paper
"Adiantum: length-preserving encryption for entry-level processors"
(https://eprint.iacr.org/2018/720.pdf) for more details. Also see
commit 059c2a4d8e ("crypto: adiantum - add Adiantum support").
On sufficiently long messages, Adiantum's bottlenecks are XChaCha12 and
the NH hash function. These algorithms are fast even on processors
without dedicated crypto instructions. Adiantum makes it feasible to
enable storage encryption on low-end mobile devices that lack AES
instructions; currently such devices are unencrypted. On ARM Cortex-A7,
on 4096-byte messages Adiantum encryption is about 4 times faster than
AES-256-XTS encryption; decryption is about 5 times faster.
In fscrypt, Adiantum is suitable for encrypting both file contents and
names. With filenames, it fixes a known weakness: when two filenames in
a directory share a common prefix of >= 16 bytes, with CTS-CBC their
encrypted filenames share a common prefix too, leaking information.
Adiantum does not have this problem.
Since Adiantum also accepts long tweaks (IVs), it's also safe to use the
master key directly for Adiantum encryption rather than deriving
per-file keys, provided that the per-file nonce is included in the IVs
and the master key isn't used for any other encryption mode. This
configuration saves memory and improves performance. A new fscrypt
policy flag is added to allow users to opt-in to this configuration.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Android uses pin_file for uncrypt during OTA, and that should be managed by
CAP_SYS_ADMIN only.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
With below testcase, we will fail to find existed xattr entry:
1. mkfs.f2fs -O extra_attr -O flexible_inline_xattr /dev/zram0
2. mount -t f2fs -o inline_xattr_size=1 /dev/zram0 /mnt/f2fs/
3. touch /mnt/f2fs/file
4. setfattr -n "user.name" -v 0 /mnt/f2fs/file
5. getfattr -n "user.name" /mnt/f2fs/file
/mnt/f2fs/file: user.name: No such attribute
The reason is for inode which has very small inline xattr size,
__find_inline_xattr() will fail to traverse any entry due to first
entry may not be loaded from xattr node yet, later, we may skip to
check entire xattr datas in __find_xattr(), result in such wrong
condition.
This patch adds condition to check such case to avoid this issue.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As Paul Bandha reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=202709
When I run the poc on the mounted f2fs img I get a buffer overflow in
read_inline_xattr due to there being no sanity check on the value of
i_inline_xattr_size.
I created the img by just modifying the value of i_inline_xattr_size
in the inode:
i_name [test1.txt]
i_ext: fofs:0 blkaddr:0 len:0
i_extra_isize [0x 18 : 24]
i_inline_xattr_size [0x ffff : 65535]
i_addr[ofs] [0x 0 : 0]
mkdir /mnt/f2fs
mount ./f2fs1.img /mnt/f2fs
gcc poc.c -o poc
./poc
int main() {
int y = syscall(SYS_listxattr, "/mnt/f2fs/test1.txt", NULL, 0);
printf("ret %d", y);
printf("errno: %d\n", errno);
}
BUG: KASAN: slab-out-of-bounds in read_inline_xattr+0x18f/0x260
Read of size 262140 at addr ffff88011035efd8 by task f2fs1poc/3263
CPU: 0 PID: 3263 Comm: f2fs1poc Not tainted 4.18.0-custom #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.1-0-g0551a4be2c-prebuilt.qemu-project.org 04/01/2014
Call Trace:
dump_stack+0x71/0xab
print_address_description+0x83/0x250
kasan_report+0x213/0x350
memcpy+0x1f/0x50
read_inline_xattr+0x18f/0x260
read_all_xattrs+0xba/0x190
f2fs_listxattr+0x9d/0x3f0
listxattr+0xb2/0xd0
path_listxattr+0x93/0xe0
do_syscall_64+0x9d/0x220
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Let's add sanity check for inode.i_inline_xattr_size during f2fs_iget()
to avoid this issue.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds some kernel messages when user sets wrong inline_xattr_size.
Fixes: 500e0b28ec ("f2fs: fix to check inline_xattr_size boundary correctly")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In f2fs_mpage_readpages(), if page is beyond EOF, we should just
zero out it, but previously, before checking previous mapping
info, we missed to check filesize boundary, fix it.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As Gao Xiang reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=202749
f2fs may skip pageout() due to incorrect page reference count.
The problem here is that MM defined the rule [1] very clearly that
once page was set with PG_private flag, we should increment the
refcount in that page, also main flows like pageout(), migrate_page()
will assume there is one additional page reference count if
page_has_private() returns true.
But currently, f2fs won't add/del refcount when changing PG_private
flag. Anyway, f2fs should follow MM's rule to make MM's related flows
running as expected.
[1] https://lore.kernel.org/lkml/2b19b3c4-2bc4-15fa-15cc-27a13e5c7af1@aol.com/
Reported-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Since 8c242db9b8 ("f2fs: fix stale ATOMIC_WRITTEN_PAGE private pointer"),
we've started to not skip clear private flag for atomic_write page
truncation, so removing old wrong comment in f2fs_invalidate_page().
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As Jiqun Li reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=202747
System can panic due to using wrong allocate/free function pair
in xattr interface:
- use kvmalloc to allocate memory
- use kzfree to free memory
Let's fix to use kvfree instead of kzfree, BTW, we are safe to
get rid of kzfree, since there is no such confidential data stored
as xattr, we don't need to zero it before free memory.
Fixes: 5222595d09 ("f2fs: use kvmalloc, if kmalloc is failed")
Reported-by: Jiqun Li <jiqun.li@unisoc.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As Seulbae Kim reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=202637
We didn't recover permission field correctly after sudden power-cut,
the reason is in setattr we didn't add inode into global dirty list
once i_mode is changed, so latter checkpoint triggered by fsync will
not flush last i_mode into disk, result in this problem, fix it.
Reported-by: Seulbae Kim <seulbae@gatech.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This follows to give random number to i_generation along with commit
2325306802 ("ext4: improve smp scalability for inode generation")
This can be used for DUN for UFS HW encryption.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
VFS will take inode_lock for readdir, therefore no need to
take page lock in readdir at all just as the majority of
other generic filesystems.
This patch improves concurrency since .iterate_shared
was introduced to VFS years ago.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In error path of IPU, we didn't account iostat correctly, fix it.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
For IPU path of f2fs_do_write_data_page(), in its error path, we
need to release encrypted page and fscrypt context, otherwise it
will cause memory leak.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch changes to allow failure of f2fs_bio_alloc() in
__submit_flush_wait(), which can simulate flush error in checkpoint()
for covering more error paths.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
With current retry mechanism in f2fs_fill_super, first fill_super
fails due to no memory, then second fill_super runs w/o recovery,
if we succeed, we may lose fsynced data, it doesn't make sense.
Let's retry fill_super only if it occurs non-ENOMEM error during
recovery.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Note that __GFP_ZERO is not supported for mempool_alloc,
which also documented in the mempool_alloc comments.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If we met this once, let fsck.f2fs clear this only.
Note that, this addresses all the subtle fault injection test.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
