[ Upstream commit 33cf42e68efc8ff529a7eee08a4f0ba8c8d0a207 ]
This is required by layouts that need to read whole NVMEM content. It's
especially useful for NVMEM devices without hardcoded layout (like
U-Boot environment data block).
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20231221173421.13737-2-zajec5@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 8679e8b4a1eb ("nvmem: u-boot-env: error if NVMEM device is too small")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 61cbfb5368dd50ed0d65ce21d305aa923581db2b ]
The cfg pointer is set before reading the channel number that the
configuration should point to. This causes configurations to be shifted
by one channel.
For example setting bipolar to the first channel defined in the DT will
cause bipolar mode to be active on the second defined channel.
Fix by moving the cfg pointer setting after reading the channel number.
Fixes: 7b8d045e49 ("iio: adc: ad7124: allow more than 8 channels")
Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240806085133.114547-1-dumitru.ceclan@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a6eaf02b82744b424b9b2c74847282deb2c6f77b ]
Using the generic firmware data access functions from property.h
provides a number of advantages:
1) Works with different firmware types.
2) Doesn't provide a 'bad' example for new IIO drivers.
3) Lets us use the new _scoped() loops with automatic reference count
cleanup for fwnode_handle
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Michael Hennerich <Michael.Hennerich@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240218172731.1023367-4-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Stable-dep-of: 61cbfb5368dd ("iio: adc: ad7124: fix DT configuration parsing")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 365130fd47af6d4317aa16a407874b699ab8d8cb ]
Similar to recently propose for_each_child_of_node_scoped() this
new version of the loop macro instantiates a new local
struct fwnode_handle * that uses the __free(fwnode_handle) auto
cleanup handling so that if a reference to a node is held on early
exit from the loop the reference will be released. If the loop
runs to completion, the child pointer will be NULL and no action will
be taken.
The reason this is useful is that it removes the need for
fwnode_handle_put() on early loop exits. If there is a need
to retain the reference, then return_ptr(child) or no_free_ptr(child)
may be used to safely disable the auto cleanup.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20240217164249.921878-5-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Stable-dep-of: 61cbfb5368dd ("iio: adc: ad7124: fix DT configuration parsing")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ff949d981c775332be94be70397ee1df20bc68e5 upstream.
The commit 783bf5d09f86 ("spi: spi-fsl-lpspi: limit PRESCALE bit in
TCR register") doesn't implement the prescaler maximum as intended.
The maximum allowed value for i.MX93 should be 1 and for i.MX7ULP
it should be 7. So this needs also a adjustment of the comparison
in the scldiv calculation.
Fixes: 783bf5d09f86 ("spi: spi-fsl-lpspi: limit PRESCALE bit in TCR register")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://patch.msgid.link/20240905111537.90389-1-wahrenst@gmx.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cd9253c23aedd61eb5ff11f37a36247cd46faf86 upstream.
If we have 2 threads that are using the same file descriptor and one of
them is doing direct IO writes while the other is doing fsync, we have a
race where we can end up either:
1) Attempt a fsync without holding the inode's lock, triggering an
assertion failures when assertions are enabled;
2) Do an invalid memory access from the fsync task because the file private
points to memory allocated on stack by the direct IO task and it may be
used by the fsync task after the stack was destroyed.
The race happens like this:
1) A user space program opens a file descriptor with O_DIRECT;
2) The program spawns 2 threads using libpthread for example;
3) One of the threads uses the file descriptor to do direct IO writes,
while the other calls fsync using the same file descriptor.
4) Call task A the thread doing direct IO writes and task B the thread
doing fsyncs;
5) Task A does a direct IO write, and at btrfs_direct_write() sets the
file's private to an on stack allocated private with the member
'fsync_skip_inode_lock' set to true;
6) Task B enters btrfs_sync_file() and sees that there's a private
structure associated to the file which has 'fsync_skip_inode_lock' set
to true, so it skips locking the inode's VFS lock;
7) Task A completes the direct IO write, and resets the file's private to
NULL since it had no prior private and our private was stack allocated.
Then it unlocks the inode's VFS lock;
8) Task B enters btrfs_get_ordered_extents_for_logging(), then the
assertion that checks the inode's VFS lock is held fails, since task B
never locked it and task A has already unlocked it.
The stack trace produced is the following:
assertion failed: inode_is_locked(&inode->vfs_inode), in fs/btrfs/ordered-data.c:983
------------[ cut here ]------------
kernel BUG at fs/btrfs/ordered-data.c:983!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP PTI
CPU: 9 PID: 5072 Comm: worker Tainted: G U OE 6.10.5-1-default #1 openSUSE Tumbleweed 69f48d427608e1c09e60ea24c6c55e2ca1b049e8
Hardware name: Acer Predator PH315-52/Covini_CFS, BIOS V1.12 07/28/2020
RIP: 0010:btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs]
Code: 50 d6 86 c0 e8 (...)
RSP: 0018:ffff9e4a03dcfc78 EFLAGS: 00010246
RAX: 0000000000000054 RBX: ffff9078a9868e98 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff907dce4a7800 RDI: ffff907dce4a7800
RBP: ffff907805518800 R08: 0000000000000000 R09: ffff9e4a03dcfb38
R10: ffff9e4a03dcfb30 R11: 0000000000000003 R12: ffff907684ae7800
R13: 0000000000000001 R14: ffff90774646b600 R15: 0000000000000000
FS: 00007f04b96006c0(0000) GS:ffff907dce480000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f32acbfc000 CR3: 00000001fd4fa005 CR4: 00000000003726f0
Call Trace:
<TASK>
? __die_body.cold+0x14/0x24
? die+0x2e/0x50
? do_trap+0xca/0x110
? do_error_trap+0x6a/0x90
? btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a]
? exc_invalid_op+0x50/0x70
? btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a]
? asm_exc_invalid_op+0x1a/0x20
? btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a]
? btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a]
btrfs_sync_file+0x21a/0x4d0 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a]
? __seccomp_filter+0x31d/0x4f0
__x64_sys_fdatasync+0x4f/0x90
do_syscall_64+0x82/0x160
? do_futex+0xcb/0x190
? __x64_sys_futex+0x10e/0x1d0
? switch_fpu_return+0x4f/0xd0
? syscall_exit_to_user_mode+0x72/0x220
? do_syscall_64+0x8e/0x160
? syscall_exit_to_user_mode+0x72/0x220
? do_syscall_64+0x8e/0x160
? syscall_exit_to_user_mode+0x72/0x220
? do_syscall_64+0x8e/0x160
? syscall_exit_to_user_mode+0x72/0x220
? do_syscall_64+0x8e/0x160
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Another problem here is if task B grabs the private pointer and then uses
it after task A has finished, since the private was allocated in the stack
of task A, it results in some invalid memory access with a hard to predict
result.
This issue, triggering the assertion, was observed with QEMU workloads by
two users in the Link tags below.
Fix this by not relying on a file's private to pass information to fsync
that it should skip locking the inode and instead pass this information
through a special value stored in current->journal_info. This is safe
because in the relevant section of the direct IO write path we are not
holding a transaction handle, so current->journal_info is NULL.
The following C program triggers the issue:
$ cat repro.c
/* Get the O_DIRECT definition. */
#ifndef _GNU_SOURCE
#define _GNU_SOURCE
#endif
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <stdint.h>
#include <fcntl.h>
#include <errno.h>
#include <string.h>
#include <pthread.h>
static int fd;
static ssize_t do_write(int fd, const void *buf, size_t count, off_t offset)
{
while (count > 0) {
ssize_t ret;
ret = pwrite(fd, buf, count, offset);
if (ret < 0) {
if (errno == EINTR)
continue;
return ret;
}
count -= ret;
buf += ret;
}
return 0;
}
static void *fsync_loop(void *arg)
{
while (1) {
int ret;
ret = fsync(fd);
if (ret != 0) {
perror("Fsync failed");
exit(6);
}
}
}
int main(int argc, char *argv[])
{
long pagesize;
void *write_buf;
pthread_t fsyncer;
int ret;
if (argc != 2) {
fprintf(stderr, "Use: %s <file path>\n", argv[0]);
return 1;
}
fd = open(argv[1], O_WRONLY | O_CREAT | O_TRUNC | O_DIRECT, 0666);
if (fd == -1) {
perror("Failed to open/create file");
return 1;
}
pagesize = sysconf(_SC_PAGE_SIZE);
if (pagesize == -1) {
perror("Failed to get page size");
return 2;
}
ret = posix_memalign(&write_buf, pagesize, pagesize);
if (ret) {
perror("Failed to allocate buffer");
return 3;
}
ret = pthread_create(&fsyncer, NULL, fsync_loop, NULL);
if (ret != 0) {
fprintf(stderr, "Failed to create writer thread: %d\n", ret);
return 4;
}
while (1) {
ret = do_write(fd, write_buf, pagesize, 0);
if (ret != 0) {
perror("Write failed");
exit(5);
}
}
return 0;
}
$ mkfs.btrfs -f /dev/sdi
$ mount /dev/sdi /mnt/sdi
$ timeout 10 ./repro /mnt/sdi/foo
Usually the race is triggered within less than 1 second. A test case for
fstests will follow soon.
Reported-by: Paulo Dias <paulo.miguel.dias@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219187
Reported-by: Andreas Jahn <jahn-andi@web.de>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219199
Reported-by: syzbot+4704b3cc972bd76024f1@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/00000000000044ff540620d7dee2@google.com/
Fixes: 939b656bc8ab ("btrfs: fix corruption after buffer fault in during direct IO append write")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c48b5a4cf3125adb679e28ef093f66ff81368d05 upstream.
So it turns out that we have to do two passes of
pti_clone_entry_text(), once before initcalls, such that device and
late initcalls can use user-mode-helper / modprobe and once after
free_initmem() / mark_readonly().
Now obviously mark_readonly() can cause PMD splits, and
pti_clone_pgtable() doesn't like that much.
Allow the late clone to split PMDs so that pagetables stay in sync.
[peterz: Changelog and comments]
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lkml.kernel.org/r/20240806184843.GX37996@noisy.programming.kicks-ass.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d6cfd1770f20392d7009ae1fdb04733794514fa9 upstream.
The membarrier system call requires a full memory barrier after storing
to rq->curr, before going back to user-space. The barrier is only
needed when switching between processes: the barrier is implied by
mmdrop() when switching from kernel to userspace, and it's not needed
when switching from userspace to kernel.
Rely on the feature/mechanism ARCH_HAS_MEMBARRIER_CALLBACKS and on the
primitive membarrier_arch_switch_mm(), already adopted by the PowerPC
architecture, to insert the required barrier.
Fixes: fab957c11e ("RISC-V: Atomic and Locking Code")
Signed-off-by: Andrea Parri <parri.andrea@gmail.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/r/20240131144936.29190-2-parri.andrea@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e58f5142f88320a5b1449f96a146f2f24615c5c7 ]
When two UBLK_CMD_START_USER_RECOVERY commands are submitted, the
first one sets 'ubq->ubq_daemon' to NULL, and the second one triggers
WARN in ublk_queue_reinit() and subsequently a NULL pointer dereference
issue.
Fix it by adding the check in ublk_ctrl_start_recovery() and return
immediately in case of zero 'ub->nr_queues_ready'.
BUG: kernel NULL pointer dereference, address: 0000000000000028
RIP: 0010:ublk_ctrl_start_recovery.constprop.0+0x82/0x180
Call Trace:
<TASK>
? __die+0x20/0x70
? page_fault_oops+0x75/0x170
? exc_page_fault+0x64/0x140
? asm_exc_page_fault+0x22/0x30
? ublk_ctrl_start_recovery.constprop.0+0x82/0x180
ublk_ctrl_uring_cmd+0x4f7/0x6c0
? pick_next_task_idle+0x26/0x40
io_uring_cmd+0x9a/0x1b0
io_issue_sqe+0x193/0x3f0
io_wq_submit_work+0x9b/0x390
io_worker_handle_work+0x165/0x360
io_wq_worker+0xcb/0x2f0
? finish_task_switch.isra.0+0x203/0x290
? finish_task_switch.isra.0+0x203/0x290
? __pfx_io_wq_worker+0x10/0x10
ret_from_fork+0x2d/0x50
? __pfx_io_wq_worker+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Fixes: c732a852b4 ("ublk_drv: add START_USER_RECOVERY and END_USER_RECOVERY support")
Reported-and-tested-by: Changhui Zhong <czhong@redhat.com>
Closes: https://lore.kernel.org/all/CAGVVp+UvLiS+bhNXV-h2icwX1dyybbYHeQUuH7RYqUvMQf6N3w@mail.gmail.com
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Li Nan <linan122@huawei.com>
Link: https://lore.kernel.org/r/20240904031348.4139545-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5ba7a75a53dffbf727e842b5847859bb482ac4aa ]
A recent change to gcc flags rv64iv as no longer valid:
cc1: sorry, unimplemented: Currently the 'V' implementation
requires the 'M' extension
and as a result vector support is disabled. Fix this by adding m
to our toolchain vector detection code.
Signed-off-by: Anton Blanchard <antonb@tenstorrent.com>
Fixes: fa8e7cce55 ("riscv: Enable Vector code to be built")
Link: https://lore.kernel.org/r/20240819001131.1738806-1-antonb@tenstorrent.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3523a3df03c6f04f7ea9c2e7050102657e331a4f ]
If smb2_set_path_attr() is called with a valid @cfile and returned
-EINVAL, we need to call cifs_get_writable_path() again as the
reference of @cfile was already dropped by previous smb2_compound_op()
call.
Fixes: 71f15c90e785 ("smb: client: retry compound request without reusing lease")
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fcd9e8afd546f6ced378d078345a89bf346d065e ]
When debug_fence_init_onstack() is unused (CONFIG_DRM_I915_SELFTEST=n),
it prevents kernel builds with clang, `make W=1` and CONFIG_WERROR=y:
.../i915_sw_fence.c:97:20: error: unused function 'debug_fence_init_onstack' [-Werror,-Wunused-function]
97 | static inline void debug_fence_init_onstack(struct i915_sw_fence *fence)
| ^~~~~~~~~~~~~~~~~~~~~~~~
Fix this by marking debug_fence_init_onstack() with __maybe_unused.
See also commit 6863f5643d ("kbuild: allow Clang to find unused static
inline functions for W=1 build").
Fixes: 214707fc2c ("drm/i915/selftests: Wrap a timer into a i915_sw_fence")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240829155950.1141978-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 5bf472058ffb43baf6a4cdfe1d7f58c4c194c688)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d10eeb75168b84ed9559c58efe2756c2e0bc052a ]
The QUPs aren't shared in a way that requires parking the RCG at an
always on parent in case some other entity turns on the clk. The
hardware is capable of setting a new frequency itself with the DFS mode,
so parking is unnecessary. Furthermore, there aren't any GDSCs for these
devices, so there isn't a possibility of the GDSC turning on the clks
for housekeeping purposes.
This wasn't a problem to mark these clks shared until we started parking
shared RCGs at clk registration time in commit 01a0a6cc8cfd ("clk: qcom:
Park shared RCGs upon registration"). Parking at init is actually
harmful to the UART when earlycon is used. If the device is pumping out
data while the frequency changes you'll see garbage on the serial
console until the driver can probe and actually set a proper frequency.
Revert the QUP part of commit 929c75d57566 ("clk: qcom: gcc-sm8550: Mark
RCGs shared where applicable") so that the QUPs don't get parked during
clk registration and break UART operations.
Fixes: 01a0a6cc8cfd ("clk: qcom: Park shared RCGs upon registration")
Fixes: 929c75d57566 ("clk: qcom: gcc-sm8550: Mark RCGs shared where applicable")
Cc: Konrad Dybcio <konradybcio@kernel.org>
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Taniya Das <quic_tdas@quicinc.com>
Reported-by: Amit Pundir <amit.pundir@linaro.org>
Closes: https://lore.kernel.org/CAMi1Hd1KQBE4kKUdAn8E5FV+BiKzuv+8FoyWQrrTHPDoYTuhgA@mail.gmail.com
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20240819233628.2074654-2-swboyd@chromium.org
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3e83957e8dd7433a69116780d9bad217b00913ea ]
This fixes the LRCLK polarity for sun8i-h3 and sun50i-h6 in i2s mode
which was wrongly inverted.
The LRCLK was being set in reversed logic compared to the DAI format:
inverted LRCLK for SND_SOC_DAIFMT_IB_NF and SND_SOC_DAIFMT_NB_NF; normal
LRCLK for SND_SOC_DAIFMT_IB_IF and SND_SOC_DAIFMT_NB_IF. Such reversed
logic applies properly for DSP_A, DSP_B, LEFT_J and RIGHT_J modes but
not for I2S mode, for which the LRCLK signal results reversed to what
expected on the bus. The issue is due to a misinterpretation of the
LRCLK polarity bit of the H3 and H6 i2s controllers. Such bit in this
case does not mean "0 => normal" or "1 => inverted" according to the
expected bus operation, but it means "0 => frame starts on low edge" and
"1 => frame starts on high edge" (from the User Manuals).
This commit fixes the LRCLK polarity by setting the LRCLK polarity bit
according to the selected bus mode and renames the LRCLK polarity bit
definition to avoid further confusion.
Fixes: dd657eae81 ("ASoC: sun4i-i2s: Fix the LRCK polarity")
Fixes: 73adf87b7a ("ASoC: sun4i-i2s: Add support for H6 I2S")
Signed-off-by: Matteo Martelli <matteomartelli3@gmail.com>
Link: https://patch.msgid.link/20240801-asoc-fix-sun4i-i2s-v2-1-a8e4e9daa363@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e0be875c5bf03a9676a6bfed9e0f1766922a7dbd ]
The SOF topology loading function sets the device name for the platform
component link. This should be unset when unloading the topology,
otherwise a machine driver unbind/bind or reprobe would complain about
an invalid component as having both its component name and of_node set:
mt8186_mt6366 sound: ASoC: Both Component name/of_node are set for AFE_SOF_DL1
mt8186_mt6366 sound: error -EINVAL: Cannot register card
mt8186_mt6366 sound: probe with driver mt8186_mt6366 failed with error -22
This happens with machine drivers that set the of_node separately.
Clear the SOF link platform name in the topology unload callback.
Fixes: 311ce4fe76 ("ASoC: SOF: Add support for loading topologies")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://patch.msgid.link/20240821041006.2618855-1-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6f01bdbfef3b62955cf6503a8425d527b3a5cf94 ]
If a drive is unable to create IO queues on the initial probe, a
subsequent reset will need to allocate the tagset if IO queue creation
is successful. Without this, blk_mq_update_nr_hw_queues will crash on a
bad pointer due to the invalid tagset.
Fixes: eac3ef2629 ("nvme-pci: split the initial probe from the rest path")
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5572a55a6f830ee3f3a994b6b962a5c327d28cb3 ]
If the commands allocation fails in nvmet_tcp_alloc_cmds()
the kernel crashes in nvmet_tcp_release_queue_work() because of
a NULL pointer dereference.
nvmet: failed to install queue 0 cntlid 1 ret 6
Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000008
Fix the bug by setting queue->nr_cmds to zero in case
nvmet_tcp_alloc_cmd() fails.
Fixes: 872d26a391 ("nvmet-tcp: add NVMe over TCP target driver")
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6781b962d97bc52715a8db8cc17278cc3c23ebe8 ]
When Tegra audio drivers are built as part of the kernel image,
TIMEOUT_ERR is observed from cbb-fabric. Following is seen on
Jetson AGX Orin during boot:
[ 8.012482] **************************************
[ 8.017423] CPU:0, Error:cbb-fabric, Errmon:2
[ 8.021922] Error Code : TIMEOUT_ERR
[ 8.025966] Overflow : Multiple TIMEOUT_ERR
[ 8.030644]
[ 8.032175] Error Code : TIMEOUT_ERR
[ 8.036217] MASTER_ID : CCPLEX
[ 8.039722] Address : 0x290a0a8
[ 8.043318] Cache : 0x1 -- Bufferable
[ 8.047630] Protection : 0x2 -- Unprivileged, Non-Secure, Data Access
[ 8.054628] Access_Type : Write
[ 8.106130] WARNING: CPU: 0 PID: 124 at drivers/soc/tegra/cbb/tegra234-cbb.c:604 tegra234_cbb_isr+0x134/0x178
[ 8.240602] Call trace:
[ 8.243126] tegra234_cbb_isr+0x134/0x178
[ 8.247261] __handle_irq_event_percpu+0x60/0x238
[ 8.252132] handle_irq_event+0x54/0xb8
These errors happen when MVC device, which is a child of AHUB
device, tries to access its device registers. This happens as
part of call tegra210_mvc_reset_vol_settings() in MVC device
probe().
The root cause of this problem is, the child MVC device gets
probed before the AHUB clock gets enabled. The AHUB clock is
enabled in runtime PM resume of parent AHUB device and due to
the wrong sequence of pm_runtime_enable() in AHUB driver,
runtime PM resume doesn't happen for AHUB device when MVC makes
register access.
Fix this by calling pm_runtime_enable() for parent AHUB device
before of_platform_populate() in AHUB driver. This ensures that
clock becomes available when MVC makes register access.
Fixes: 16e1bcc2ca ("ASoC: tegra: Add Tegra210 based AHUB driver")
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Signed-off-by: Ritu Chaudhary <rituc@nvidia.com>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://patch.msgid.link/20240823144342.4123814-3-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 88715b6e5d529f4ef3830ad2a893e4624c6af0b8 ]
Patch series "Reimplement huge pages without hugepd on powerpc (8xx, e500,
book3s/64)", v7.
Unlike most architectures, powerpc 8xx HW requires a two-level pagetable
topology for all page sizes. So a leaf PMD-contig approach is not
feasible as such.
Possible sizes on 8xx are 4k, 16k, 512k and 8M.
First level (PGD/PMD) covers 4M per entry. For 8M pages, two PMD entries
must point to a single entry level-2 page table. Until now that was done
using hugepd. This series changes it to use standard page tables where
the entry is replicated 1024 times on each of the two pagetables refered
by the two associated PMD entries for that 8M page.
For e500 and book3s/64 there are less constraints because it is not tied
to the HW assisted tablewalk like on 8xx, so it is easier to use leaf PMDs
(and PUDs).
On e500 the supported page sizes are 4M, 16M, 64M, 256M and 1G. All at
PMD level on e500/32 (mpc85xx) and mix of PMD and PUD for e500/64. We
encode page size with 4 available bits in PTE entries. On e300/32 PGD
entries size is increases to 64 bits in order to allow leaf-PMD entries
because PTE are 64 bits on e500.
On book3s/64 only the hash-4k mode is concerned. It supports 16M pages as
cont-PMD and 16G pages as cont-PUD. In other modes (radix-4k, radix-6k
and hash-64k) the sizes match with PMD and PUD sizes so that's just leaf
entries. The hash processing make things a bit more complex. To ease
things, __hash_page_huge() is modified to bail out when DIRTY or ACCESSED
bits are missing, leaving it to mm core to fix it.
This patch (of 23):
The nohash HTW_IBM (Hardware Table Walk) code is unused since support for
A2 was removed in commit fb5a515704 ("powerpc: Remove platforms/ wsp and
associated pieces") (2014).
The remaining supported CPUs use either no HTW (data_tlb_miss_bolted), or
the e6500 HTW (data_tlb_miss_e6500).
Link: https://lkml.kernel.org/r/cover.1719928057.git.christophe.leroy@csgroup.eu
Link: https://lkml.kernel.org/r/820dd1385ecc931f07b0d7a0fa827b1613917ab6.1719928057.git.christophe.leroy@csgroup.eu
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: d92b5cc29c79 ("powerpc/64e: Define mmu_pte_psize static")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6357efe3abead68048729adf11a9363881657939 ]
Update PLL offsets to DEFAULT_EVO to configure MDIO to 800MHz.
The incorrect clock frequency leads to an incorrect MDIO clock. This,
in turn, affects the MDIO hardware configurations as the divider is
calculated from the MDIO clock frequency. If the clock frequency is
not as expected, the MDIO register fails due to the generation of an
incorrect MDIO frequency.
This issue is critical as it results in incorrect MDIO configurations
and ultimately leads to the MDIO function not working. This results in
a complete feature failure affecting all Ethernet PHYs. Specifically,
Ethernet will not work on IPQ9574 due to this issue.
Currently, the clock frequency is set to CLK_ALPHA_PLL_TYPE_DEFAULT.
However, this setting does not yield the expected clock frequency.
To rectify this, we need to change this to CLK_ALPHA_PLL_TYPE_DEFAULT_EVO.
This modification ensures that the clock frequency aligns with our
expectations, thereby resolving the MDIO register failure and ensuring
the proper functioning of the Ethernet on IPQ9574.
Fixes: d75b82cff4 ("clk: qcom: Add Global Clock Controller driver for IPQ9574")
Signed-off-by: devi priya <quic_devipriy@quicinc.com>
Signed-off-by: Amandeep Singh <quic_amansing@quicinc.com>
Link: https://lore.kernel.org/r/20240806061105.2849944-1-quic_amansing@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8323c036789b8b4a61925fce439a89dba17b7f2f ]
Missing src scatterlist nent assignment in rsa decrypt function.
Removing all unneeded assignment and use nents value from req->src
instead.
Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6aad7019f697ab0bed98eba737d19bd7f67713de ]
Hardware expects RSA input plain/ciphertext to be 32-bit aligned.
Set fixed length for preallocated buffer to the maximum supported
keysize of the hardware and shift input text accordingly.
Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 24436be590c6fbb05f6161b0dfba7d9da60214aa ]
This patch tries to works around erratum DS80000789E 6 of the
mcp2518fd, the other variants of the chip family (mcp2517fd and
mcp251863) are probably also affected.
In the bad case, the driver reads a too large head index. In the
original code, the driver always trusted the read value, which caused
old, already processed CAN frames or new, incompletely written CAN
frames to be (re-)processed.
To work around this issue, keep a per FIFO timestamp [1] of the last
valid received CAN frame and compare against the timestamp of every
received CAN frame. If an old CAN frame is detected, abort the
iteration and mark the number of valid CAN frames as processed in the
chip by incrementing the FIFO's tail index.
Further tests showed that this workaround can recognize old CAN
frames, but a small time window remains in which partially written CAN
frames [2] are not recognized but then processed. These CAN frames
have the correct data and time stamps, but the DLC has not yet been
updated.
[1] As the raw timestamp overflows every 107 seconds (at the usual
clock rate of 40 MHz) convert it to nanoseconds with the
timecounter framework and use this to detect stale CAN frames.
Link: https://lore.kernel.org/all/BL3PR11MB64844C1C95CA3BDADAE4D8CCFBC99@BL3PR11MB6484.namprd11.prod.outlook.com [2]
Reported-by: Stefan Althöfer <Stefan.Althoefer@janztec.com>
Closes: https://lore.kernel.org/all/FR0P281MB1966273C216630B120ABB6E197E89@FR0P281MB1966.DEUP281.PROD.OUTLOOK.COM
Tested-by: Stefan Althöfer <Stefan.Althoefer@janztec.com>
Tested-by: Thomas Kopp <thomas.kopp@microchip.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e793c724b48ca8cae9693bc3be528e85284c126a ]
The mcp251xfd chip is configured to provide a timestamp with each
received and transmitted CAN frame. The timestamp is derived from the
internal free-running timer, which can also be read from the TBC
register via SPI. The timer is 32 bits wide and is clocked by the
external oscillator (typically 20 or 40 MHz).
To avoid confusion, we call this timestamp "timestamp_raw" or "ts_raw"
for short.
Using the timecounter framework, the "ts_raw" is converted to 64 bit
nanoseconds since the epoch. This is what we call "timestamp".
This is a preparation for the next patches which use the "timestamp"
to work around a bug where so far only the "ts_raw" is used.
Tested-by: Stefan Althöfer <Stefan.Althoefer@janztec.com>
Tested-by: Thomas Kopp <thomas.kopp@microchip.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 85505e585637a737e4713c1386c30e37c325b82e ]
This is a preparatory patch to work around erratum DS80000789E 6 of
the mcp2518fd, the other variants of the chip family (mcp2517fd and
mcp251863) are probably also affected.
When handling the RX interrupt, the driver iterates over all pending
FIFOs (which are implemented as ring buffers in hardware) and reads
the FIFO header index from the RX FIFO STA register of the chip.
In the bad case, the driver reads a too large head index. In the
original code, the driver always trusted the read value, which caused
old CAN frames that were already processed, or new, incompletely
written CAN frames to be (re-)processed.
Instead of reading and trusting the head index, read the head index
and calculate the number of CAN frames that were supposedly received -
replace mcp251xfd_rx_ring_update() with mcp251xfd_get_rx_len().
The mcp251xfd_handle_rxif_ring() function reads the received CAN
frames from the chip, iterates over them and pushes them into the
network stack. Prepare that the iteration can be stopped if an old CAN
frame is detected. The actual code to detect old or incomplete frames
and abort will be added in the next patch.
Link: https://lore.kernel.org/all/BL3PR11MB64844C1C95CA3BDADAE4D8CCFBC99@BL3PR11MB6484.namprd11.prod.outlook.com
Reported-by: Stefan Althöfer <Stefan.Althoefer@janztec.com>
Closes: https://lore.kernel.org/all/FR0P281MB1966273C216630B120ABB6E197E89@FR0P281MB1966.DEUP281.PROD.OUTLOOK.COM
Tested-by: Stefan Althöfer <Stefan.Althoefer@janztec.com>
Tested-by: Thomas Kopp <thomas.kopp@microchip.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d49184b7b585f9da7ee546b744525f62117019f6 ]
This is a preparation patch.
Sending the UINC messages followed by incrementing the tail pointer
will be called in more than one place in upcoming patches, so factor
this out into a separate function.
Also make mcp251xfd_handle_rxif_ring_uinc() safe to be called with a
"len" of 0.
Tested-by: Stefan Althöfer <Stefan.Althoefer@janztec.com>
Tested-by: Thomas Kopp <thomas.kopp@microchip.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2488444274c70038eb6b686cba5f1ce48ebb9cdd ]
In a review discussion of the changes to support vCPU hotplug where
a check was added on the GICC being enabled if was online, it was
noted that there is need to map back to the cpu and use that to index
into a cpumask. As such, a valid ID is needed.
If an MPIDR check fails in acpi_map_gic_cpu_interface() it is possible
for the entry in cpu_madt_gicc[cpu] == NULL. This function would
then cause a NULL pointer dereference. Whilst a path to trigger
this has not been established, harden this caller against the
possibility.
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240529133446.28446-13-Jonathan.Cameron@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 47ec9b417ed9b6b8ec2a941cd84d9de62adc358a ]
If acpi_processor_get_info() returned an error, pr and the associated
pr->throttling.shared_cpu_map were leaked.
The unwind code was in the wrong order wrt to setup, relying on
some unwind actions having no affect (clearing variables that were
never set etc). That makes it harder to reason about so reorder
and add appropriate labels to only undo what was actually set up
in the first place.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240529133446.28446-6-Jonathan.Cameron@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 98f887f820c993e05a12e8aa816c80b8661d4c87 ]
On a ~2000 CPU powerpc system, hard lockups have been observed in the
workqueue code when stop_machine runs (in this case due to CPU hotplug).
This is due to lots of CPUs spinning in multi_cpu_stop, calling
touch_nmi_watchdog() which ends up calling wq_watchdog_touch().
wq_watchdog_touch() writes to the global variable wq_watchdog_touched,
and that can find itself in the same cacheline as other important
workqueue data, which slows down operations to the point of lockups.
In the case of the following abridged trace, worker_pool_idr was in
the hot line, causing the lockups to always appear at idr_find.
watchdog: CPU 1125 self-detected hard LOCKUP @ idr_find
Call Trace:
get_work_pool
__queue_work
call_timer_fn
run_timer_softirq
__do_softirq
do_softirq_own_stack
irq_exit
timer_interrupt
decrementer_common_virt
* interrupt: 900 (timer) at multi_cpu_stop
multi_cpu_stop
cpu_stopper_thread
smpboot_thread_fn
kthread
Fix this by having wq_watchdog_touch() only write to the line if the
last time a touch was recorded exceeds 1/4 of the watchdog threshold.
Reported-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
