commit c28445fa06 upstream.
The nested acquisition of loop_ctl_mutex (->lo_ctl_mutex back then) has
been introduced by commit f028f3b2f9 "loop: fix circular locking in
loop_clr_fd()" to fix lockdep complains about bd_mutex being acquired
after lo_ctl_mutex during partition rereading. Now that these are
properly fixed, let's stop fooling lockdep.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1dded9acf6 upstream.
Code in loop_change_fd() drops reference to the old file (and also the
new file in a failure case) under loop_ctl_mutex. Similarly to a
situation in loop_set_fd() this can create a circular locking dependency
if this was the last reference holding the file open. Delay dropping of
the file reference until we have released loop_ctl_mutex.
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0da03cab87 upstream.
Calling blkdev_reread_part() under loop_ctl_mutex causes lockdep to
complain about circular lock dependency between bdev->bd_mutex and
lo->lo_ctl_mutex. The problem is that on loop device open or close
lo_open() and lo_release() get called with bdev->bd_mutex held and they
need to acquire loop_ctl_mutex. OTOH when loop_reread_partitions() is
called with loop_ctl_mutex held, it will call blkdev_reread_part() which
acquires bdev->bd_mutex. See syzbot report for details [1].
Move call to blkdev_reread_part() in __loop_clr_fd() from under
loop_ctl_mutex to finish fixing of the lockdep warning and the possible
deadlock.
[1] https://syzkaller.appspot.com/bug?id=bf154052f0eea4bc7712499e4569505907d1588
Reported-by: syzbot <syzbot+4684a000d5abdade83fac55b1e7d1f935ef1936e@syzkaller.appspotmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 85b0a54a82 upstream.
Calling loop_reread_partitions() under loop_ctl_mutex causes lockdep to
complain about circular lock dependency between bdev->bd_mutex and
lo->lo_ctl_mutex. The problem is that on loop device open or close
lo_open() and lo_release() get called with bdev->bd_mutex held and they
need to acquire loop_ctl_mutex. OTOH when loop_reread_partitions() is
called with loop_ctl_mutex held, it will call blkdev_reread_part() which
acquires bdev->bd_mutex. See syzbot report for details [1].
Move all calls of loop_rescan_partitions() out of loop_ctl_mutex to
avoid lockdep warning and fix deadlock possibility.
[1] https://syzkaller.appspot.com/bug?id=bf154052f0eea4bc7712499e4569505907d1588
Reported-by: syzbot <syzbot+4684a000d5abdade83fac55b1e7d1f935ef1936e@syzkaller.appspotmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d57f3374ba upstream.
The call of __blkdev_reread_part() from loop_reread_partition() happens
only when we need to invalidate partitions from loop_release(). Thus
move a detection for this into loop_clr_fd() and simplify
loop_reread_partition().
This makes loop_reread_partition() safe to use without loop_ctl_mutex
because we use only lo->lo_number and lo->lo_file_name in case of error
for reporting purposes (thus possibly reporting outdate information is
not a big deal) and we are safe from 'lo' going away under us by
elevated lo->lo_refcnt.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c371077000 upstream.
Push loop_ctl_mutex down to loop_change_fd(). We will need this to be
able to call loop_reread_partitions() without loop_ctl_mutex.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 757ecf40b7 upstream.
Push lo_ctl_mutex down to loop_set_fd(). We will need this to be able to
call loop_reread_partitions() without lo_ctl_mutex.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 550df5fdac upstream.
Push loop_ctl_mutex down to loop_set_status(). We will need this to be
able to call loop_reread_partitions() without loop_ctl_mutex.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4a5ce9ba58 upstream.
Push loop_ctl_mutex down to loop_get_status() to avoid the unusual
convention that the function gets called with loop_ctl_mutex held and
releases it.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7ccd0791d9 upstream.
loop_clr_fd() has a weird locking convention that is expects
loop_ctl_mutex held, releases it on success and keeps it on failure.
Untangle the mess by moving locking of loop_ctl_mutex into
loop_clr_fd().
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a2505b799a upstream.
Move setting of lo_state to Lo_rundown out into the callers. That will
allow us to unlock loop_ctl_mutex while the loop device is protected
from other changes by its special state.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a13165441d upstream.
Push acquisition of lo_ctl_mutex down into individual ioctl handling
branches. This is a preparatory step for pushing the lock down into
individual ioctl handling functions so that they can release the lock as
they need it. We also factor out some simple ioctl handlers that will
not need any special handling to reduce unnecessary code duplication.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0a42e99b58 upstream.
Now that loop_ctl_mutex is global, just get rid of loop_index_mutex as
there is no good reason to keep these two separate and it just
complicates the locking.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 967d1dc144 upstream.
__loop_release() has a single call site. Fold it there. This is
currently not a huge win but it will make following replacement of
loop_index_mutex more obvious.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2753ca5d90 upstream.
BUG: KMSAN: uninit-value in tipc_nl_compat_doit+0x404/0xa10 net/tipc/netlink_compat.c:335
CPU: 0 PID: 4514 Comm: syz-executor485 Not tainted 4.16.0+ #87
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x185/0x1d0 lib/dump_stack.c:53
kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067
__msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:683
tipc_nl_compat_doit+0x404/0xa10 net/tipc/netlink_compat.c:335
tipc_nl_compat_recv+0x164b/0x2700 net/tipc/netlink_compat.c:1153
genl_family_rcv_msg net/netlink/genetlink.c:599 [inline]
genl_rcv_msg+0x1686/0x1810 net/netlink/genetlink.c:624
netlink_rcv_skb+0x378/0x600 net/netlink/af_netlink.c:2447
genl_rcv+0x63/0x80 net/netlink/genetlink.c:635
netlink_unicast_kernel net/netlink/af_netlink.c:1311 [inline]
netlink_unicast+0x166b/0x1740 net/netlink/af_netlink.c:1337
netlink_sendmsg+0x1048/0x1310 net/netlink/af_netlink.c:1900
sock_sendmsg_nosec net/socket.c:630 [inline]
sock_sendmsg net/socket.c:640 [inline]
___sys_sendmsg+0xec0/0x1310 net/socket.c:2046
__sys_sendmsg net/socket.c:2080 [inline]
SYSC_sendmsg+0x2a3/0x3d0 net/socket.c:2091
SyS_sendmsg+0x54/0x80 net/socket.c:2087
do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x43fda9
RSP: 002b:00007ffd0c184ba8 EFLAGS: 00000213 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 000000000043fda9
RDX: 0000000000000000 RSI: 0000000020023000 RDI: 0000000000000003
RBP: 00000000006ca018 R08: 00000000004002c8 R09: 00000000004002c8
R10: 00000000004002c8 R11: 0000000000000213 R12: 00000000004016d0
R13: 0000000000401760 R14: 0000000000000000 R15: 0000000000000000
Uninit was created at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline]
kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:188
kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:314
kmsan_slab_alloc+0x11/0x20 mm/kmsan/kmsan.c:321
slab_post_alloc_hook mm/slab.h:445 [inline]
slab_alloc_node mm/slub.c:2737 [inline]
__kmalloc_node_track_caller+0xaed/0x11c0 mm/slub.c:4369
__kmalloc_reserve net/core/skbuff.c:138 [inline]
__alloc_skb+0x2cf/0x9f0 net/core/skbuff.c:206
alloc_skb include/linux/skbuff.h:984 [inline]
netlink_alloc_large_skb net/netlink/af_netlink.c:1183 [inline]
netlink_sendmsg+0x9a6/0x1310 net/netlink/af_netlink.c:1875
sock_sendmsg_nosec net/socket.c:630 [inline]
sock_sendmsg net/socket.c:640 [inline]
___sys_sendmsg+0xec0/0x1310 net/socket.c:2046
__sys_sendmsg net/socket.c:2080 [inline]
SYSC_sendmsg+0x2a3/0x3d0 net/socket.c:2091
SyS_sendmsg+0x54/0x80 net/socket.c:2087
do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
In tipc_nl_compat_recv(), when the len variable returned by
nlmsg_attrlen() is 0, the message is still treated as a valid one,
which is obviously unresonable. When len is zero, it means the
message not only doesn't contain any valid TLV payload, but also
TLV header is not included. Under this stituation, tlv_type field
in TLV header is still accessed in tipc_nl_compat_dumpit() or
tipc_nl_compat_doit(), but the field space is obviously illegal.
Of course, it is not initialized.
Reported-by: syzbot+bca0dc46634781f08b38@syzkaller.appspotmail.com
Reported-by: syzbot+6bdb590321a7ae40c1a6@syzkaller.appspotmail.com
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a88289f4dd upstream.
syzbot reported:
BUG: KMSAN: uninit-value in tipc_conn_rcv_sub+0x184/0x950 net/tipc/topsrv.c:373
CPU: 0 PID: 66 Comm: kworker/u4:4 Not tainted 4.17.0-rc3+ #88
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: tipc_rcv tipc_conn_recv_work
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x185/0x1d0 lib/dump_stack.c:113
kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067
__msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:683
tipc_conn_rcv_sub+0x184/0x950 net/tipc/topsrv.c:373
tipc_conn_rcv_from_sock net/tipc/topsrv.c:409 [inline]
tipc_conn_recv_work+0x3cd/0x560 net/tipc/topsrv.c:424
process_one_work+0x12c6/0x1f60 kernel/workqueue.c:2145
worker_thread+0x113c/0x24f0 kernel/workqueue.c:2279
kthread+0x539/0x720 kernel/kthread.c:239
ret_from_fork+0x35/0x40 arch/x86/entry/entry_64.S:412
Local variable description: ----s.i@tipc_conn_recv_work
Variable was created at:
tipc_conn_recv_work+0x65/0x560 net/tipc/topsrv.c:419
process_one_work+0x12c6/0x1f60 kernel/workqueue.c:2145
In tipc_conn_rcv_from_sock(), it always supposes the length of message
received from sock_recvmsg() is not smaller than the size of struct
tipc_subscr. However, this assumption is false. Especially when the
length of received message is shorter than struct tipc_subscr size,
we will end up touching uninitialized fields in tipc_conn_rcv_sub().
Reported-by: syzbot+8951a3065ee7fd6d6e23@syzkaller.appspotmail.com
Reported-by: syzbot+75e6e042c5bbf691fc82@syzkaller.appspotmail.com
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 04906b2f54 upstream.
bd_set_size() updates also block device's block size. This is somewhat
unexpected from its name and at this point, only blkdev_open() uses this
functionality. Furthermore, this can result in changing block size under
a filesystem mounted on a loop device which leads to livelocks inside
__getblk_gfp() like:
Sending NMI from CPU 0 to CPUs 1:
NMI backtrace for cpu 1
CPU: 1 PID: 10863 Comm: syz-executor0 Not tainted 4.18.0-rc5+ #151
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google
01/01/2011
RIP: 0010:__sanitizer_cov_trace_pc+0x3f/0x50 kernel/kcov.c:106
...
Call Trace:
init_page_buffers+0x3e2/0x530 fs/buffer.c:904
grow_dev_page fs/buffer.c:947 [inline]
grow_buffers fs/buffer.c:1009 [inline]
__getblk_slow fs/buffer.c:1036 [inline]
__getblk_gfp+0x906/0xb10 fs/buffer.c:1313
__bread_gfp+0x2d/0x310 fs/buffer.c:1347
sb_bread include/linux/buffer_head.h:307 [inline]
fat12_ent_bread+0x14e/0x3d0 fs/fat/fatent.c:75
fat_ent_read_block fs/fat/fatent.c:441 [inline]
fat_alloc_clusters+0x8ce/0x16e0 fs/fat/fatent.c:489
fat_add_cluster+0x7a/0x150 fs/fat/inode.c:101
__fat_get_block fs/fat/inode.c:148 [inline]
...
Trivial reproducer for the problem looks like:
truncate -s 1G /tmp/image
losetup /dev/loop0 /tmp/image
mkfs.ext4 -b 1024 /dev/loop0
mount -t ext4 /dev/loop0 /mnt
losetup -c /dev/loop0
l /mnt
Fix the problem by moving initialization of a block device block size
into a separate function and call it when needed.
Thanks to Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> for help with
debugging the problem.
Reported-by: syzbot+9933e4476f365f5d5a1b@syzkaller.appspotmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e2c8d550a9 upstream.
The [ip,ip6,arp]_tables use x_tables_info internally and the underlying
memory is already accounted to kmemcg. Do the same for ebtables. The
syzbot, by using setsockopt(EBT_SO_SET_ENTRIES), was able to OOM the
whole system from a restricted memcg, a potential DoS.
By accounting the ebt_table_info, the memory used for ebt_table_info can
be contained within the memcg of the allocating process. However the
lifetime of ebt_table_info is independent of the allocating process and
is tied to the network namespace. So, the oom-killer will not be able to
relieve the memory pressure due to ebt_table_info memory. The memory for
ebt_table_info is allocated through vmalloc. Currently vmalloc does not
handle the oom-killed allocating process correctly and one large
allocation can bypass memcg limit enforcement. So, with this patch,
at least the small allocations will be contained. For large allocations,
we need to fix vmalloc.
Reported-by: syzbot+7713f3aa67be76b1552c@syzkaller.appspotmail.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cd26d1c4d1 upstream.
If a filehandle is dup()ped, then it is possible to close it from one fd
and call mmap from the other. This creates a race condition in vb2_mmap
where it is using queue data that __vb2_queue_free (called from close())
is in the process of releasing.
By moving up the mutex_lock(mmap_lock) in vb2_mmap this race is avoided
since __vb2_queue_free is called with the same mutex locked. So vb2_mmap
now reads consistent buffer data.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Reported-by: syzbot+be93025dd45dccd8923c@syzkaller.appspotmail.com
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8d93367045 upstream.
syzbot was able to crash one host with the following stack trace :
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 8625 Comm: syz-executor4 Not tainted 4.20.0+ #8
RIP: 0010:dev_net include/linux/netdevice.h:2169 [inline]
RIP: 0010:icmp6_send+0x116/0x2d30 net/ipv6/icmp.c:426
icmpv6_send
smack_socket_sock_rcv_skb
security_sock_rcv_skb
sk_filter_trim_cap
__sk_receive_skb
dccp_v6_do_rcv
release_sock
This is because a RX packet found socket owned by user and
was stored into socket backlog. Before leaving RCU protected section,
skb->dev was cleared in __sk_receive_skb(). When socket backlog
was finally handled at release_sock() time, skb was fed to
smack_socket_sock_rcv_skb() then icmp6_send()
We could fix the bug in smack_socket_sock_rcv_skb(), or simply
make icmp6_send() more robust against such possibility.
In the future we might provide to icmp6_send() the net pointer
instead of infering it.
Fixes: d66a8acbda ("Smack: Inform peer that IPv6 traffic has been blocked")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Piotr Sawicki <p.sawicki2@partner.samsung.com>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e7c87bd6cc upstream.
Syzkaller was able to construct a packet of negative length by
redirecting from bpf_prog_test_run_skb with BPF_PROG_TYPE_LWT_XMIT:
BUG: KASAN: slab-out-of-bounds in memcpy include/linux/string.h:345 [inline]
BUG: KASAN: slab-out-of-bounds in skb_copy_from_linear_data include/linux/skbuff.h:3421 [inline]
BUG: KASAN: slab-out-of-bounds in __pskb_copy_fclone+0x2dd/0xeb0 net/core/skbuff.c:1395
Read of size 4294967282 at addr ffff8801d798009c by task syz-executor2/12942
kasan_report.cold.9+0x242/0x309 mm/kasan/report.c:412
check_memory_region_inline mm/kasan/kasan.c:260 [inline]
check_memory_region+0x13e/0x1b0 mm/kasan/kasan.c:267
memcpy+0x23/0x50 mm/kasan/kasan.c:302
memcpy include/linux/string.h:345 [inline]
skb_copy_from_linear_data include/linux/skbuff.h:3421 [inline]
__pskb_copy_fclone+0x2dd/0xeb0 net/core/skbuff.c:1395
__pskb_copy include/linux/skbuff.h:1053 [inline]
pskb_copy include/linux/skbuff.h:2904 [inline]
skb_realloc_headroom+0xe7/0x120 net/core/skbuff.c:1539
ipip6_tunnel_xmit net/ipv6/sit.c:965 [inline]
sit_tunnel_xmit+0xe1b/0x30d0 net/ipv6/sit.c:1029
__netdev_start_xmit include/linux/netdevice.h:4325 [inline]
netdev_start_xmit include/linux/netdevice.h:4334 [inline]
xmit_one net/core/dev.c:3219 [inline]
dev_hard_start_xmit+0x295/0xc90 net/core/dev.c:3235
__dev_queue_xmit+0x2f0d/0x3950 net/core/dev.c:3805
dev_queue_xmit+0x17/0x20 net/core/dev.c:3838
__bpf_tx_skb net/core/filter.c:2016 [inline]
__bpf_redirect_common net/core/filter.c:2054 [inline]
__bpf_redirect+0x5cf/0xb20 net/core/filter.c:2061
____bpf_clone_redirect net/core/filter.c:2094 [inline]
bpf_clone_redirect+0x2f6/0x490 net/core/filter.c:2066
bpf_prog_41f2bcae09cd4ac3+0xb25/0x1000
The generated test constructs a packet with mac header, network
header, skb->data pointing to network header and skb->len 0.
Redirecting to a sit0 through __bpf_redirect_no_mac pulls the
mac length, even though skb->data already is at skb->network_header.
bpf_prog_test_run_skb has already pulled it as LWT_XMIT !is_l2.
Update the offset calculation to pull only if skb->data differs
from skb->network_header, which is not true in this case.
The test itself can be run only from commit 1cf1cae963 ("bpf:
introduce BPF_PROG_TEST_RUN command"), but the same type of packets
with skb at network header could already be built from lwt xmit hooks,
so this fix is more relevant to that commit.
Also set the mac header on redirect from LWT_XMIT, as even after this
change to __bpf_redirect_no_mac that field is expected to be set, but
is not yet in ip_finish_output2.
Fixes: 3a0af8fd61 ("bpf: BPF for lightweight tunnel infrastructure")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 701f49bc02 upstream.
kthread_run returns an error pointer, but elsewhere in the code
dev->kthread_vid_cap/out is checked against NULL.
If kthread_run returns an error, then set the pointer to NULL.
I chose this method over changing all kthread_vid_cap/out tests
elsewhere since this is more robust.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: syzbot+53d5b2df0d9744411e2e@syzkaller.appspotmail.com
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a01421e448 upstream.
Using [1] for static analysis I found that the OMAPFB_QUERY_PLANE,
OMAPFB_GET_COLOR_KEY, OMAPFB_GET_DISPLAY_INFO, and OMAPFB_GET_VRAM_INFO
cases could all leak uninitialized stack memory--either due to
uninitialized padding or 'reserved' fields.
Fix them by clearing the shared union used to store copied out data.
[1] https://github.com/vlad902/kernel-uninitialized-memory-checker
Signed-off-by: Vlad Tsyrklevich <vlad@tsyrklevich.net>
Reviewed-by: Kees Cook <keescook@chromium.org>
Fixes: b39a982dde ("OMAP: DSS2: omapfb driver")
Cc: security@kernel.org
[b.zolnierkie: prefix patch subject with "omap2fb: "]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fbfaf85190 upstream.
If an input number x for int_sqrt64() has the highest bit set, then
fls64(x) is 64. (1UL << 64) is an overflow and breaks the algorithm.
Subtracting 1 is a better guess for the initial value of m anyway and
that's what also done in int_sqrt() implicitly [*].
[*] Note how int_sqrt() uses __fls() with two underscores, which already
returns the proper raw bit number.
In contrast, int_sqrt64() used fls64(), and that returns bit numbers
illogically starting at 1, because of error handling for the "no
bits set" case. Will points out that he bug probably is due to a
copy-and-paste error from the regular int_sqrt() case.
Signed-off-by: Florian La Roche <Florian.LaRoche@googlemail.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 132ac39cff upstream.
The memory area [0x4000000-0x4200000[ is occupied by the PSCI firmware. Any
attempt to access it from Linux leads to an immediate crash.
So let's make the same memory reservation as the vendor kernel.
[gregory: added as comment that this region matches the mainline U-boot]
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1598ecda7b upstream.
kaslr_early_init() is called with the kernel mapped at its
link time offset, and if it returns with a non-zero offset,
the kernel is unmapped and remapped again at the randomized
offset.
During its execution, kaslr_early_init() also randomizes the
base of the module region and of the linear mapping of DRAM,
and sets two variables accordingly. However, since these
variables are assigned with the caches on, they may get lost
during the cache maintenance that occurs when unmapping and
remapping the kernel, so ensure that these values are cleaned
to the PoC.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Fixes: f80fb3a3d5 ("arm64: add support for kernel ASLR")
Cc: <stable@vger.kernel.org> # v4.6+
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5631e8576a upstream.
Yue Hu noticed that when parsing device tree the allocated platform data
was never freed. Since it's not used beyond the function scope, this
switches to using a stack variable instead.
Reported-by: Yue Hu <huyue2@yulong.com>
Fixes: 35da60941e ("pstore/ram: add Device Tree bindings")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 16fd20aa98 upstream.
When building using GCC 4.7 or older, -ffunction-sections & the -pg flag
used by ftrace are incompatible. This causes warnings or build failures
(where -Werror applies) such as the following:
arch/mips/generic/init.c:
error: -ffunction-sections disabled; it makes profiling impossible
This used to be taken into account by the ordering of calls to cc-option
from within the top-level Makefile, which was introduced by commit
90ad4052e8 ("kbuild: avoid conflict between -ffunction-sections and
-pg on gcc-4.7"). Unfortunately this was broken when the
CONFIG_LD_DEAD_CODE_DATA_ELIMINATION cc-option check was moved to
Kconfig in commit e85d1d65cd ("kbuild: test dead code/data elimination
support in Kconfig"), because the flags used by this check no longer
include -pg.
Fix this by not allowing CONFIG_LD_DEAD_CODE_DATA_ELIMINATION to be
enabled at the same time as ftrace/CONFIG_FUNCTION_TRACER when building
using GCC 4.7 or older.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: e85d1d65cd ("kbuild: test dead code/data elimination support in Kconfig")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a9666c1cae upstream.
Unsafe global rkey is considered dangerous because it exposes memory
registered for all memory in the system. Only users with a QP on the same
PD can use the rkey, and generally those QPs will already know the
value. However, out of caution, do not expose the value to unprivleged
users on the local system. Require CAP_NET_ADMIN instead.
Cc: <stable@vger.kernel.org> # 4.16
Fixes: 29cf1351d4 ("RDMA/nldev: provide detailed PD information")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ac4ca4b9f4 upstream.
The tps6586x driver creates an irqchip that is used by its various child
devices for managing interrupts. The tps6586x-rtc device is one of its
children that uses the tps6586x irqchip. When using the tps6586x-rtc as
a wake-up device from suspend, the following is seen:
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.001 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
Disabling non-boot CPUs ...
Entering suspend state LP1
Enabling non-boot CPUs ...
CPU1 is up
tps6586x 3-0034: failed to read interrupt status
tps6586x 3-0034: failed to read interrupt status
The reason why the tps6586x interrupt status cannot be read is because
the tps6586x interrupt is not masked during suspend and when the
tps6586x-rtc interrupt occurs, to wake-up the device, the interrupt is
seen before the i2c controller has been resumed in order to read the
tps6586x interrupt status.
The tps6586x-rtc driver sets it's interrupt as a wake-up source during
suspend, which gets propagated to the parent tps6586x interrupt.
However, the tps6586x-rtc driver cannot disable it's interrupt during
suspend otherwise we would never be woken up and so the tps6586x must
disable it's interrupt instead.
Prevent the tps6586x interrupt handler from executing on exiting suspend
before the i2c controller has been resumed by disabling the tps6586x
interrupt on entering suspend and re-enabling it on resuming from
suspend.
Cc: stable@vger.kernel.org
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 28b170e88b upstream.
Add an of_node_put when the result of of_graph_get_remote_port_parent is
not available.
The semantic match that finds this problem is as follows
(http://coccinelle.lip6.fr):
// <smpl>
@r exists@
local idexpression e;
expression x;
@@
e = of_graph_get_remote_port_parent(...);
... when != x = e
when != true e == NULL
when != of_node_put(e)
when != of_fwnode_handle(e)
(
return e;
|
*return ...;
)
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: stable@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 51b00d8509 upstream.
This is to fix missed mmap range check on vGPU bar2 region
and only allow to map vGPU allocated GMADDR range, which means
user space should support sparse mmap to get proper offset for
mmap vGPU aperture. And this takes care of actual pgoff in mmap
request as original code always does from beginning of vGPU
aperture.
Fixes: 659643f7d8 ("drm/i915/gvt/kvmgt: add vfio/mdev support to KVMGT")
Cc: "Monroy, Rodrigo Axel" <rodrigo.axel.monroy@intel.com>
Cc: "Orrala Contreras, Alfredo" <alfredo.orrala.contreras@intel.com>
Cc: stable@vger.kernel.org # v4.10+
Reviewed-by: Hang Yuan <hang.yuan@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2b4dba55b0 upstream.
This makes SMP on the vrx200 work again, by removing all the MIPS CPU
interrupt specific code and making it fully use the generic MIPS CPU
interrupt controller.
The mti,cpu-interrupt-controller from irq-mips-cpu.c now handles the CPU
interrupts and also the IPI interrupts which are used to communication
between the CPUs in a SMP system. The generic interrupt code was
already used before but the interrupt vectors were overwritten again
when we called set_vi_handler() in the lantiq interrupt driver and we
also provided our own plat_irq_dispatch() function which overwrote the
weak generic implementation. Now the code uses the generic handler for
the MIPS CPU interrupts including the IPI interrupts and registers a
handler for the CPU interrupts which are handled by the lantiq ICU with
irq_set_chained_handler() which was already called before.
Calling the set_c0_status() function is also not needed any more because
the generic MIPS CPU interrupt already activates the needed bits.
Fixes: 1eed400435 ("MIPS: smp-mt: Use CPU interrupt controller IPI IRQ domain support")
Cc: stable@kernel.org # v4.12
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: jhogan@kernel.org
Cc: ralf@linux-mips.org
Cc: john@phrozen.org
Cc: linux-mips@linux-mips.org
Cc: linux-mips@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
