* for-next/selftests:
kselftest/arm64: Allow epoll_wait() to return more than one result
kselftest/arm64: Don't drain output while spawning children
kselftest/arm64: Hold fp-stress children until they're all spawned
kselftest/arm64: Set test names prior to starting children
kselftest/arm64: Use preferred form for predicate load/stores
kselftest/arm64: fix array_size.cocci warning
kselftest/arm64: fix array_size.cocci warning
kselftest/arm64: Print ASCII version of unknown signal frame magic values
kselftest/arm64: Remove validation of extra_context from TODO
kselftest/arm64: Provide progress messages when signalling children
kselftest/arm64: Check that all children are producing output in fp-stress
* for-next/kprobes:
arm64: kprobes: Return DBG_HOOK_ERROR if kprobes can not handle a BRK
arm64: kprobes: Let arch do_page_fault() fix up page fault in user handler
arm64: Prohibit instrumentation on arch_stack_walk()
* for-next/kdump:
arm64: kdump: Support crashkernel=X fall back to reserve region above DMA zones
arm64: kdump: Provide default size when crashkernel=Y,low is not specified
* for-next/cpufeature:
kselftest/arm64: Add SVE 2.1 to hwcap test
arm64/hwcap: Add support for SVE 2.1
kselftest/arm64: Add FEAT_RPRFM to the hwcap test
arm64/hwcap: Add support for FEAT_RPRFM
kselftest/arm64: Add FEAT_CSSC to the hwcap selftest
arm64/hwcap: Add support for FEAT_CSSC
arm64: Enable data independent timing (DIT) in the kernel
Return DBG_HOOK_ERROR if kprobes can not handle a BRK because it
fails to find a kprobe corresponding to the address.
Since arm64 kprobes uses stop_machine based text patching for removing
BRK, it ensures all running kprobe_break_handler() is done at that point.
And after removing the BRK, it removes the kprobe from its hash list.
Thus, if the kprobe_break_handler() fails to find kprobe from hash list,
there is a bug.
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/166994753273.439920.6629626290560350760.stgit@devnote3
Signed-off-by: Will Deacon <will@kernel.org>
When everything is starting up we are likely to have a lot of child
processes producing output at once. This means that we can reduce
overhead a bit by allowing epoll_wait() to return more than one
descriptor at once, it cuts down on the number of system calls we need
to do which on virtual platforms where the syscall overhead is a bit
more noticable and we're likely to have a lot more children active can
make a small but noticable difference.
On physical platforms the relatively small number of processes being run
and vastly improved speeds push the effects of this change into the
noise.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221129215926.442895-4-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
At present fp-stress has a bit of a thundering herd problem since the
children it spawns start running immediately, meaning that they can start
starving the parent process of CPU before it has even started all the
children. This is much more severe on virtual platforms since they tend to
support far more SVE and SME vector lengths, be slower in general and for
some have issues with performance when simulating multiple CPUs.
We can mitigate this problem by having all the child processes block before
starting the test program, meaning that we at least have all the child
processes started before we start heavily using CPU. We still have the same
load issues while waiting for the actual stress test programs to start up
and produce output but they're at least all ready to go before that kicks
in, resulting in substantial reductions in overall runtime on some of the
severely affected systems. One test was showing about 20% improvement.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221129215926.442895-2-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
The PMU support to filter the TLP when counting the bandwidth with below
options:
- only count the TLP headers
- only count the TLP payloads
- count both TLP headers and payloads
In the current driver it's default to count the TLP payloads only, which
will have an implicity side effects that on the traffic only have header
only TLPs, we'll get no data.
Make this user configuration through "len_mode" parameter and make it
default to count both TLP headers and payloads when user not specified.
Also update the documentation for it.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20221117084136.53572-5-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Some configurations (i.e., 64k + LVA/LPA) can tolerate a physical
placement of the kernel image outside of the 48-bit addressable region,
but given that the loader has no way of knowing whether or not the image
in question supports LVA/LPA, it currently has no choice but to place it
below the 48-bit mark.
Once we add support for LPA2, which allows 52-bit physical and virtual
addressing when using 4k or 16k pages, but in way that relies on
increasing the number of paging levels, there will be more variety in
the configurations that may or may not support this.
So redefine bit #3 in the Image header as 'must be placed within 48-bit
addressable memory', as this is the current de facto meaning.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20221122170249.2453853-1-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
The build test robot pointer out that there's a build failure when:
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=y
CONFIG_DYNAMIC_FTRACE_WITH_ARGS=n
... due to some mismatched ifdeffery, some of which checks
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS, and some of which checks
CONFIG_DYNAMIC_FTRACE_WITH_ARGS, leading to some missing definitions expected
by the core code when CONFIG_DYNAMIC_FTRACE=n and consequently
CONFIG_DYNAMIC_FTRACE_WITH_ARGS=n.
There's really not much point in supporting CONFIG_DYNAMIC_FTRACE=n (AKA
static ftrace). All supported toolchains allow us to implement
DYNAMIC_FTRACE, distributions all prefer DYNAMIC_FTRACE, and both
powerpc and s390 removed support for static ftrace in commits:
0c0c52306f ("powerpc: Only support DYNAMIC_FTRACE not static")
5d6a016349 ("s390/ftrace: enforce DYNAMIC_FTRACE if FUNCTION_TRACER is selected")
... and according to Steven, static ftrace is only supported on x86 to
allow testing that the core code still functions in this configuration.
Given that, let's simplify matters by removing arm64's support for
static ftrace. This avoids the problem originally reported, and leaves
us with less code to maintain.
Fixes: 26299b3f6b ("ftrace: arm64: move from REGS to ARGS")
Link: https://lore.kernel.org/r/202211212249.livTPi3Y-lkp@intel.com
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20221122163624.1225912-1-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
The driver misses including <linux/io.h>, which causes a compilation
error with x86_64 'allmodconfig':
drivers/perf/amlogic/meson_g12_ddr_pmu.c: In function 'dmc_g12_get_freq_quick':
drivers/perf/amlogic/meson_g12_ddr_pmu.c:135:15: error: implicit declaration of function 'readl' [-Werror=implicit-function-declaration]
135 | val = readl(info->pll_reg);
| ^~~~~
drivers/perf/amlogic/meson_g12_ddr_pmu.c: In function 'dmc_g12_counter_enable':
drivers/perf/amlogic/meson_g12_ddr_pmu.c:204:9: error: implicit declaration of function 'writel' [-Werror=implicit-function-declaration]
204 | writel(clock_count, info->ddr_reg[0] + DMC_MON_G12_TIMER);
| ^~~~~~
Add the missing header to fix the build.
Fixes: 2016e2113d ("perf/amlogic: Add support for Amlogic meson G12 SoC DDR PMU driver")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jiucheng Xu <jiucheng.xu@amlogic.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20221122084028.572494-1-jiucheng.xu@amlogic.com
Signed-off-by: Will Deacon <will@kernel.org>
If a Cortex-A715 cpu sees a page mapping permissions change from executable
to non-executable, it may corrupt the ESR_ELx and FAR_ELx registers, on the
next instruction abort caused by permission fault.
Only user-space does executable to non-executable permission transition via
mprotect() system call which calls ptep_modify_prot_start() and ptep_modify
_prot_commit() helpers, while changing the page mapping. The platform code
can override these helpers via __HAVE_ARCH_PTEP_MODIFY_PROT_TRANSACTION.
Work around the problem via doing a break-before-make TLB invalidation, for
all executable user space mappings, that go through mprotect() system call.
This overrides ptep_modify_prot_start() and ptep_modify_prot_commit(), via
defining HAVE_ARCH_PTEP_MODIFY_PROT_TRANSACTION on the platform thus giving
an opportunity to intercept user space exec mappings, and do the necessary
TLB invalidation. Similar interceptions are also implemented for HugeTLB.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20221116140915.356601-3-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
This commit replaces arm64's support for FTRACE_WITH_REGS with support
for FTRACE_WITH_ARGS. This removes some overhead and complexity, and
removes some latent issues with inconsistent presentation of struct
pt_regs (which can only be reliably saved/restored at exception
boundaries).
FTRACE_WITH_REGS has been supported on arm64 since commit:
3b23e4991f ("arm64: implement ftrace with regs")
As noted in the commit message, the major reasons for implementing
FTRACE_WITH_REGS were:
(1) To make it possible to use the ftrace graph tracer with pointer
authentication, where it's necessary to snapshot/manipulate the LR
before it is signed by the instrumented function.
(2) To make it possible to implement LIVEPATCH in future, where we need
to hook function entry before an instrumented function manipulates
the stack or argument registers. Practically speaking, we need to
preserve the argument/return registers, PC, LR, and SP.
Neither of these need a struct pt_regs, and only require the set of
registers which are live at function call/return boundaries. Our calling
convention is defined by "Procedure Call Standard for the Arm® 64-bit
Architecture (AArch64)" (AKA "AAPCS64"), which can currently be found
at:
https://github.com/ARM-software/abi-aa/blob/main/aapcs64/aapcs64.rst
Per AAPCS64, all function call argument and return values are held in
the following GPRs:
* X0 - X7 : parameter / result registers
* X8 : indirect result location register
* SP : stack pointer (AKA SP)
Additionally, ad function call boundaries, the following GPRs hold
context/return information:
* X29 : frame pointer (AKA FP)
* X30 : link register (AKA LR)
... and for ftrace we need to capture the instrumented address:
* PC : program counter
No other GPRs are relevant, as none of the other arguments hold
parameters or return values:
* X9 - X17 : temporaries, may be clobbered
* X18 : shadow call stack pointer (or temorary)
* X19 - X28 : callee saved
This patch implements FTRACE_WITH_ARGS for arm64, only saving/restoring
the minimal set of registers necessary. This is always sufficient to
manipulate control flow (e.g. for live-patching) or to manipulate
function arguments and return values.
This reduces the necessary stack usage from 336 bytes for pt_regs down
to 112 bytes for ftrace_regs + 32 bytes for two frame records, freeing
up 188 bytes. This could be reduced further with changes to the
unwinder.
As there is no longer a need to save different sets of registers for
different features, we no longer need distinct `ftrace_caller` and
`ftrace_regs_caller` trampolines. This allows the trampoline assembly to
be simpler, and simplifies code which previously had to handle the two
trampolines.
I've tested this with the ftrace selftests, where there are no
unexpected failures.
Co-developed-by: Florent Revest <revest@chromium.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Florent Revest <revest@chromium.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20221103170520.931305-5-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
In subsequent patches we'll arrange for architectures to have an
ftrace_regs which is entirely distinct from pt_regs. In preparation for
this, we need to minimize the use of pt_regs to where strictly necessary
in the core ftrace code.
This patch adds new ftrace_regs_{get,set}_*() helpers which can be used
to manipulate ftrace_regs. When CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=y,
these can always be used on any ftrace_regs, and when
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=n these can be used when regs are
available. A new ftrace_regs_has_args(fregs) helper is added which code
can use to check when these are usable.
Co-developed-by: Florent Revest <revest@chromium.org>
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20221103170520.931305-4-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
In subsequent patches we'll arrange for architectures to have an
ftrace_regs which is entirely distinct from pt_regs. In preparation for
this, we need to minimize the use of pt_regs to where strictly
necessary in the core ftrace code.
This patch changes the prototype of arch_ftrace_set_direct_caller() to
take ftrace_regs rather than pt_regs, and moves the extraction of the
pt_regs into arch_ftrace_set_direct_caller().
On x86, arch_ftrace_set_direct_caller() can be used even when
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=n, and <linux/ftrace.h> defines
struct ftrace_regs. Due to this, it's necessary to define
arch_ftrace_set_direct_caller() as a macro to avoid using an incomplete
type. I've also moved the body of arch_ftrace_set_direct_caller() after
the CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=y defineidion of struct
ftrace_regs.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20221103170520.931305-2-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Build on arm64 allmodconfig failed with:
| depmod: ERROR: Cycle detected: arm_cspmu -> nvidia_cspmu -> arm_cspmu
| depmod: ERROR: Found 2 modules in dependency cycles!
The arm_cspmu.c provides standard functions to operate the PMU and the
vendor code provides vendor specific attributes. Both need to be built as
single kernel module.
Update the makefile to compile sources under arm_cspmu into one module.
Signed-off-by: Besar Wicaksono <bwicaksono@nvidia.com>
Reviewed-and-Tested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20221116203952.34168-1-bwicaksono@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
