[ Upstream commit 536bb492d3 ]
If client send smb2 negotiate request and then send smb1 negotiate
request, init_smb2_rsp_hdr is called for smb1 negotiate request since
need_neg is set to false. This patch ignore smb1 packets after ->need_neg
is set to false.
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-21541
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e202a1e863 ]
ksmbd doesn't support compound read. If client send read-read in
compound to ksmbd, there can be memory leak from read buffer.
Windows and linux clients doesn't send it to server yet. For now,
No response from compound read. compound read will be supported soon.
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-21587, ZDI-CAN-21588
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3df0411e13 ]
`smb2_get_msg()` in smb2_get_ksmbd_tcon() and smb2_check_user_session()
will always return the first request smb2 header in a compound request.
if `SMB2_TREE_CONNECT_HE` is the first command in compound request, will
return 0, i.e. The tree id check is skipped.
This patch use ksmbd_req_buf_next() to get current command in compound.
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-21506
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4a73edab69 ]
Similarly to the previous patch: offs can be used in handle_rerrors
without initializing on small payloads; in this case handle_rerrors will
not use it because of the size check, but it doesn't hurt to make sure
it is zero to please scan-build.
This fixes the following warning:
net/9p/trans_virtio.c:539:3: warning: 3rd function call argument is an uninitialized value [core.CallAndMessage]
handle_rerror(req, in_hdr_len, offs, in_pages);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 13ade4ac5c ]
handle_rerror can dereference the pages pointer, but it is not
necessarily set for small payloads.
In practice these should be filtered out by the size check, but
might as well double-check explicitly.
This fixes the following scan-build warnings:
net/9p/trans_virtio.c:401:24: warning: Dereference of null pointer [core.NullDereference]
memcpy_from_page(to, *pages++, offs, n);
^~~~~~~~
net/9p/trans_virtio.c:406:23: warning: Dereference of null pointer (loaded from variable 'pages') [core.NullDereference]
memcpy_from_page(to, *pages, offs, size);
^~~~~~
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4aaa96b59d ]
After having been assigned to NULL value at cx23885-dvb.c:1202,
pointer '0' is dereferenced at cx23885-dvb.c:2469.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Nikolay Burykin <burikin@ivk.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 92cbf865ea ]
Handle (and warn about) possible error waiting for MSGCODE_PING result.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1e13da548f ]
Revert commit 75b18aac6f ("MIPS: unhide PATA_PLATFORM") now that
HAVE_PATA_PLATFORM is set selectively for all the relevant platforms.
Verified with `db1xxx_defconfig' and `sb1250_swarm_defconfig' by making
sure PATA_PLATFORM is still there in `.config' with this change applied,
and with `malta_defconfig' by making sure it's now gone.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ae440c5da3 ]
Some drivers firmwares parse by themselves slice header and need
num_delta_pocs_of_ref_rps_idx value to parse slice header
short_term_ref_pic_set().
Use one of the 4 reserved bytes to store this value without
changing the v4l2_ctrl_hevc_decode_params structure size and padding.
This value also exist in DXVA API.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: fix typo in num_delta_pocs_of_ref_rps_idx doc]
Stable-dep-of: 297160d411 ("media: mediatek: vcodec: move core context from device to each instance")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2b694fc96f ]
When building the boot wrapper assembly files with clang after
commit 648a1783fe ("powerpc/boot: Fix boot wrapper code generation
with CONFIG_POWER10_CPU"), the following warnings appear for each file
built:
'-prefixed' is not a recognized feature for this target (ignoring feature)
'-pcrel' is not a recognized feature for this target (ignoring feature)
While it is questionable whether or not LLVM should be emitting a
warning when passed negative versions of code generation flags when
building assembly files (since it does not emit a warning for the
altivec and vsx flags), it is easy enough to work around this by just
moving the disabled flags to BOOTCFLAGS after the assignment of
BOOTAFLAGS, so that they are not added when building assembly files.
Do so to silence the warnings.
Fixes: 648a1783fe ("powerpc/boot: Fix boot wrapper code generation with CONFIG_POWER10_CPU")
Link: https://github.com/ClangBuiltLinux/linux/issues/1839
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230427-remove-power10-args-from-boot-aflags-clang-v1-1-9107f7c943bc@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be18293e47 ]
If the tuning step is not set, the tuning step is set to 1.
For some sd cards, the following Tuning timeout will occur.
Tuning failed, falling back to fixed sampling clock
mmc0: Tuning failed, falling back to fixed sampling clock
So set the default tuning step. This refers to the NXP vendor's
commit below:
https://github.com/nxp-imx/linux-imx/blob/lf-6.1.y/
arch/arm/boot/dts/imx7s.dtsi#L1216-L1217
Fixes: 1e336aa0c0 ("mmc: sdhci-esdhc-imx: correct the tuning start tap and step setting")
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a99a4ff6ef ]
This partially reverts commit de231189e7 ("drm/amd/display: Fix
possible underflow for displays with large vblank").
[Why]
The increased value of VBlankNomDefaultUS causes underflow at the
desktop of an IP KVM setup
[How]
Change the value from 800 back to 668
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7ebd00a5a2 ]
This reverts commit 56a16035bb.
Since the previous commit, STP works on bridge in netns.
# unshare -n
# ip link add br0 type bridge
# ip link add veth0 type veth peer name veth1
# ip link set veth0 master br0 up
[ 50.558135] br0: port 1(veth0) entered blocking state
[ 50.558366] br0: port 1(veth0) entered disabled state
[ 50.558798] veth0: entered allmulticast mode
[ 50.564401] veth0: entered promiscuous mode
# ip link set veth1 master br0 up
[ 54.215487] br0: port 2(veth1) entered blocking state
[ 54.215657] br0: port 2(veth1) entered disabled state
[ 54.215848] veth1: entered allmulticast mode
[ 54.219577] veth1: entered promiscuous mode
# ip link set br0 type bridge stp_state 1
# ip link set br0 up
[ 61.960726] br0: port 2(veth1) entered blocking state
[ 61.961097] br0: port 2(veth1) entered listening state
[ 61.961495] br0: port 1(veth0) entered blocking state
[ 61.961653] br0: port 1(veth0) entered listening state
[ 63.998835] br0: port 2(veth1) entered blocking state
[ 77.437113] br0: port 1(veth0) entered learning state
[ 86.653501] br0: received packet on veth0 with own address as source address (addr:6e:0f:e7:6f:5f:5f, vlan:0)
[ 92.797095] br0: port 1(veth0) entered forwarding state
[ 92.797398] br0: topology change detected, propagating
Let's remove the warning.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit cdaac8e7e5 upstream.
A syzbot stress test using a corrupted disk image reported that
mark_buffer_dirty() called from __nilfs_mark_inode_dirty() or
nilfs_palloc_commit_alloc_entry() may output a kernel warning, and can
panic if the kernel is booted with panic_on_warn.
This is because nilfs2 keeps buffer pointers in local structures for some
metadata and reuses them, but such buffers may be forcibly discarded by
nilfs_clear_dirty_page() in some critical situations.
This issue is reported to appear after commit 28a65b49eb ("nilfs2: do
not write dirty data after degenerating to read-only"), but the issue has
potentially existed before.
Fix this issue by checking the uptodate flag when attempting to reuse an
internally held buffer, and reloading the metadata instead of reusing the
buffer if the flag was lost.
Link: https://lkml.kernel.org/r/20230818131804.7758-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+cdfcae656bac88ba0e2d@syzkaller.appspotmail.com
Closes: https://lkml.kernel.org/r/0000000000003da75f05fdeffd12@google.com
Fixes: 8c26c4e269 ("nilfs2: fix issue with flush kernel thread after remount in RO mode because of driver's internal error or metadata corruption")
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org> # 3.10+
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9baeea723c upstream.
When configuring a pin as an output pin with a value of logic 0, we
end up as having a value of logic 1 on the output pin. Setting a
logic 0 a second time (or more) after that will correctly output a
logic 0 on the output pin.
By default, all GPIO pins are configured as inputs. When we enter
sc16is7xx_gpio_direction_output() for the first time, we first set the
desired value in IOSTATE, and then we configure the pin as an output.
The datasheet states that writing to IOSTATE register will trigger a
transfer of the value to the I/O pin configured as output, so if the
pin is configured as an input, nothing will be transferred.
Therefore, set the direction first in IODIR, and then set the desired
value in IOSTATE.
This is what is done in NXP application note AN10587.
Fixes: dfeae619d7 ("serial: sc16is7xx")
Cc: stable@vger.kernel.org
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Lech Perczak <lech.perczak@camlingroup.com>
Tested-by: Lech Perczak <lech.perczak@camlingroup.com>
Link: https://lore.kernel.org/r/20230807214556.540627-6-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2861ed4d6e upstream.
The sc16is7xx_config_rs485() function is called only for the second
port (index 1, channel B), causing initialization problems for the
first port.
For the sc16is7xx driver, port->membase and port->mapbase are not set,
and their default values are 0. And we set port->iobase to the device
index. This means that when the first device is registered using the
uart_add_one_port() function, the following values will be in the port
structure:
port->membase = 0
port->mapbase = 0
port->iobase = 0
Therefore, the function uart_configure_port() in serial_core.c will
exit early because of the following check:
/*
* If there isn't a port here, don't do anything further.
*/
if (!port->iobase && !port->mapbase && !port->membase)
return;
Typically, I2C and SPI drivers do not set port->membase and
port->mapbase.
The max310x driver sets port->membase to ~0 (all ones). By
implementing the same change in this driver, uart_configure_port() is
now correctly executed for all ports.
Fixes: dfeae619d7 ("serial: sc16is7xx")
Cc: stable@vger.kernel.org
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Lech Perczak <lech.perczak@camlingroup.com>
Tested-by: Lech Perczak <lech.perczak@camlingroup.com>
Link: https://lore.kernel.org/r/20230807214556.540627-2-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b642f4c5f3 upstream.
txs may be dropped if the frame is aggregated in AMSDU. When the problem
shows up, some SKBs would be hold in driver to cause network stopped
temporarily. Even if the problem can be recovered by txs timeout handling,
mt7921 still need to disable txs in AMSDU to avoid this issue.
Cc: stable@vger.kernel.org
Fixes: 163f4d22c1 ("mt76: mt7921: add MAC support")
Reviewed-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 73f7b171b7 upstream.
In btsdio_probe, the data->work is bound with btsdio_work. It will be
started in btsdio_send_frame.
If the btsdio_remove runs with a unfinished work, there may be a race
condition that hdev is freed but used in btsdio_work. Fix it by
canceling the work before do cleanup in btsdio_remove.
Fixes: CVE-2023-1989
Fixes: ddbaf13e36 ("[Bluetooth] Add generic driver for Bluetooth SDIO devices")
Cc: stable@vger.kernel.org
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
[ Denis: Added CVE-2023-1989 and fixes tags. ]
Signed-off-by: Denis Efremov (Oracle) <efremov@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9ac6678b95 upstream.
Currently the EKR battery remains even after we stop getting information
from the device. This can lead to a stale battery persisting indefinitely
in userspace.
The remote sends a heartbeat every 10 seconds. Delete the battery if we
miss two heartbeats (after 21 seconds). Restore the battery once we see
a heartbeat again.
Signed-off-by: Aaron Skomra <skomra@gmail.com>
Signed-off-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Fixes: 9f1015d45f ("HID: wacom: EKR: attach the power_supply on first connection")
CC: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1fa206bb76 upstream.
Device connected to usb otg port of GXL-based boards can not be
recognised after resumption, doesn't recover even if disconnect and
reconnect the device. dmesg shows it disconnects during resumption.
[ 41.492911] usb 1-2: USB disconnect, device number 3
[ 41.499346] usb 1-2: unregistering device
[ 41.511939] usb 1-2: unregistering interface 1-2:1.0
Calling usb_post_init() will fix this issue, and it's tested and
verified on libretech's aml-s905x-cc board.
Cc: stable@vger.kernel.org # v5.8+
Fixes: c99993376f ("usb: dwc3: Add Amlogic G12A DWC3 glue")
Signed-off-by: Luke Lu <luke.lu@libre.computer>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230809212911.18903-1-luke.lu@libre.computer
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5fadc941d0 upstream.
There have been reports of USB-audio driver spewing errors at the
probe time on a few devices like Jabra and Logitech. The suggested
fix there couldn't be applied as is, unfortunately, because it'll
likely break other devices.
But, the patch suggested an interesting point: looking at the current
init code in stream.c, one may notice that it does initialize
differently from the device setup in endpoint.c. Namely, for UAC1, we
should call snd_usb_init_pitch() and snd_usb_init_sample_rate() after
setting the interface, while the init sequence at parsing calls them
before setting the interface blindly.
This patch changes the init sequence at parsing for UAC1 (and other
devices that need a similar behavior) to be aligned with the rest of
the code, setting the interface at first. And, this fixes the
long-standing problems on a few UAC1 devices like Jabra / Logitech,
as reported, too.
Reported-and-tested-by: Joakim Tjernlund <joakim.tjernlund@infinera.com>
Closes: https://lore.kernel.org/r/202bbbc0f51522e8545783c4c5577d12a8e2d56d.camel@infinera.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230821111857.28926-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9011e49d54 upstream.
It has recently come to my attention that nvidia is circumventing the
protection added in 262e6ae708 ("modules: inherit
TAINT_PROPRIETARY_MODULE") by importing exports from their proprietary
modules into an allegedly GPL licensed module and then rexporting them.
Given that symbol_get was only ever intended for tightly cooperating
modules using very internal symbols it is logical to restrict it to
being used on EXPORT_SYMBOL_GPL and prevent nvidia from costly DMCA
Circumvention of Access Controls law suites.
All symbols except for four used through symbol_get were already exported
as EXPORT_SYMBOL_GPL, and the remaining four ones were switched over in
the preparation patches.
Fixes: 262e6ae708 ("modules: inherit TAINT_PROPRIETARY_MODULE")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 95e7ebc682 upstream.
ds1685_rtc_poweroff is only used externally via symbol_get, which was
only ever intended for very internal symbols like this one. Use
EXPORT_SYMBOL_GPL for it so that symbol_get can enforce only being used
on EXPORT_SYMBOL_GPL symbols.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Joshua Kinard <kumba@gentoo.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 569820befb upstream.
enetc_phc_index is only used via symbol_get, which was only ever
intended for very internal symbols like this one. Use EXPORT_SYMBOL_GPL
for it so that symbol_get can enforce only being used on
EXPORT_SYMBOL_GPL symbols.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d4a5c59a95 upstream.
au1xmmc is split somewhat awkwardly into the main mmc subsystem driver,
and callbacks in platform_data that sit under arch/mips/ and are
always built in. The latter than call mmc_detect_change through
symbol_get. Remove the use of symbol_get by requiring the driver
to be built in. In the future the interrupt handlers for card
insert/eject detection should probably be moved into the main driver,
and which point it can be built modular again.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Manuel Lauss <manuel.lauss@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
[mcgrof: squashed in depends on MMC=y suggested by Arnd]
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0faa29c420 upstream.
The spitz board file uses the obscure symbol_get() function
to optionally call a function from sharpsl_pm.c if that is
built. However, the two files are always built together
these days, and have been for a long time, so this can
be changed to a normal function call.
Link: https://lore.kernel.org/lkml/20230731162639.GA9441@lst.de/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e628bf939a upstream.
Create 3 kinds of files to reproduce this problem.
dd if=/dev/urandom of=127k.bin bs=1024 count=127
dd if=/dev/urandom of=128k.bin bs=1024 count=128
dd if=/dev/urandom of=129k.bin bs=1024 count=129
When copying files from ksmbd share to windows or cifs.ko, The following
error message happen from windows client.
"The file '129k.bin' is too large for the destination filesystem."
We can see the error logs from ksmbd debug prints
[48394.611537] ksmbd: RDMA r/w request 0x0: token 0x669d, length 0x20000
[48394.612054] ksmbd: smb_direct: RDMA write, len 0x20000, needed credits 0x1
[48394.612572] ksmbd: filename 129k.bin, offset 131072, len 131072
[48394.614189] ksmbd: nbytes 1024, offset 132096 mincount 0
[48394.614585] ksmbd: Failed to process 8 [-22]
And we can reproduce it with cifs.ko,
e.g. dd if=129k.bin of=/dev/null bs=128KB count=2
This problem is that ksmbd rdma return error if remaining bytes is less
than Length of Buffer Descriptor V1 Structure.
smb_direct_rdma_xmit()
...
if (desc_buf_len == 0 || total_length > buf_len ||
total_length > t->max_rdma_rw_size)
return -EINVAL;
This patch reduce descriptor size with remaining bytes and remove the
check for total_length and buf_len.
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
