commit 985616f045 upstream.
The write-URB busy flag was being cleared before the completion handler
was done with the URB, something which could lead to corrupt transfers
due to a racing write request if the URB is resubmitted.
Fixes: 507ca9bc04 ("[PATCH] USB: add ability for usb-serial drivers to determine if their write urb is currently being used.")
Cc: stable <stable@vger.kernel.org> # 2.6.13
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 912ab37c79 upstream.
Mediatek 8250 port supports speed higher than uartclk / 16. If the baud
rates in both the new and the old termios setting are higher than
uartclk / 16, the WARN_ON in uart_get_baud_rate() will be triggered.
Passing NULL as the old termios so uart_get_baud_rate() will use
uartclk / 16 - 1 as the new baud rate which will be replaced by the
original baud rate later by tty_termios_encode_baud_rate() in
mtk8250_set_termios().
Fixes: 551e553f0d ("serial: 8250_mtk: Fix high-speed baud rates clamping")
Signed-off-by: Claire Chang <tientzu@chromium.org>
Link: https://lore.kernel.org/r/20201102120749.374458-1-tientzu@chromium.org
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3c4e0dff20 upstream.
It's buggy:
On Fri, Nov 06, 2020 at 10:30:08PM +0800, Minh Yuan wrote:
> We recently discovered a slab-out-of-bounds read in fbcon in the latest
> kernel ( v5.10-rc2 for now ). The root cause of this vulnerability is that
> "fbcon_do_set_font" did not handle "vc->vc_font.data" and
> "vc->vc_font.height" correctly, and the patch
> <https://lkml.org/lkml/2020/9/27/223> for VT_RESIZEX can't handle this
> issue.
>
> Specifically, we use KD_FONT_OP_SET to set a small font.data for tty6, and
> use KD_FONT_OP_SET again to set a large font.height for tty1. After that,
> we use KD_FONT_OP_COPY to assign tty6's vc_font.data to tty1's vc_font.data
> in "fbcon_do_set_font", while tty1 retains the original larger
> height. Obviously, this will cause an out-of-bounds read, because we can
> access a smaller vc_font.data with a larger vc_font.height.
Further there was only one user ever.
- Android's loadfont, busybox and console-tools only ever use OP_GET
and OP_SET
- fbset documentation only mentions the kernel cmdline font: option,
not anything else.
- systemd used OP_COPY before release 232 published in Nov 2016
Now unfortunately the crucial report seems to have gone down with
gmane, and the commit message doesn't say much. But the pull request
hints at OP_COPY being broken
https://github.com/systemd/systemd/pull/3651
So in other words, this never worked, and the only project which
foolishly every tried to use it, realized that rather quickly too.
Instead of trying to fix security issues here on dead code by adding
missing checks, fix the entire thing by removing the functionality.
Note that systemd code using the OP_COPY function ignored the return
value, so it doesn't matter what we're doing here really - just in
case a lone server somewhere happens to be extremely unlucky and
running an affected old version of systemd. The relevant code from
font_copy_to_all_vcs() in systemd was:
/* copy font from active VT, where the font was uploaded to */
cfo.op = KD_FONT_OP_COPY;
cfo.height = vcs.v_active-1; /* tty1 == index 0 */
(void) ioctl(vcfd, KDFONTOP, &cfo);
Note this just disables the ioctl, garbage collecting the now unused
callbacks is left for -next.
v2: Tetsuo found the old mail, which allowed me to find it on another
archive. Add the link too.
Acked-by: Peilin Ye <yepeilin.cs@gmail.com>
Reported-by: Minh Yuan <yuanmingbuaa@gmail.com>
References: https://lists.freedesktop.org/archives/systemd-devel/2016-June/036935.html
References: https://github.com/systemd/systemd/pull/3651
Cc: Greg KH <greg@kroah.com>
Cc: Peilin Ye <yepeilin.cs@gmail.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://lore.kernel.org/r/20201108153806.3140315-1-daniel.vetter@ffwll.ch
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 831e3405c2 ]
The current scanning mechanism is supposed to fall back to a synchronous
host scan if an asynchronous scan is in progress. However, this rule isn't
strictly respected, scsi_prep_async_scan() doesn't hold scan_mutex when
checking shost->async_scan. When scsi_scan_host() is called concurrently,
two async scans on same host can be started and a hang in do_scan_async()
is observed.
Fixes this issue by checking & setting shost->async_scan atomically with
shost->scan_mutex.
Link: https://lore.kernel.org/r/20201010032539.426615-1-ming.lei@redhat.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ewan D. Milne <emilne@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f255c19b3a ]
Similarly to commit 457e490f2b ("blkcg: allocate struct blkcg_gq
outside request queue spinlock"), blkg_create can also trigger
occasional -ENOMEM failures at the radix insertion because any
allocation inside blkg_create has to be non-blocking, making it more
likely to fail. This causes trouble for userspace tools trying to
configure io weights who need to deal with this condition.
This patch reduces the occurrence of -ENOMEMs on this path by preloading
the radix tree element on a GFP_KERNEL context, such that we guarantee
the later non-blocking insertion won't fail.
A similar solution exists in blkcg_init_queue for the same situation.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca05f33316 ]
The reserved-memory overlap detection code fails to detect overlaps if
either of the regions starts at address 0x0. The code explicitly checks
for and ignores such regions, apparently in order to ignore dynamically
allocated regions which have an address of 0x0 at this point. These
dynamically allocated regions also have a size of 0x0 at this point, so
fix this by removing the check and sorting the dynamically allocated
regions ahead of any static regions at address 0x0.
For example, there are two overlaps in this case but they are not
currently reported:
foo@0 {
reg = <0x0 0x2000>;
};
bar@0 {
reg = <0x0 0x1000>;
};
baz@1000 {
reg = <0x1000 0x1000>;
};
quux {
size = <0x1000>;
};
but they are after this patch:
OF: reserved mem: OVERLAP DETECTED!
bar@0 (0x00000000--0x00001000) overlaps with foo@0 (0x00000000--0x00002000)
OF: reserved mem: OVERLAP DETECTED!
foo@0 (0x00000000--0x00002000) overlaps with baz@1000 (0x00001000--0x00002000)
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Link: https://lore.kernel.org/r/ded6fd6b47b58741aabdcc6967f73eca6a3f311e.1603273666.git-series.vincent.whitchurch@axis.com
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit afc18069a2 ]
kexec_file_load() currently reuses the old boot_params.screen_info,
but if drivers have change the hardware state, boot_param.screen_info
could contain invalid info.
For example, the video type might be no longer VGA, or the frame buffer
address might be changed. If the kexec kernel keeps using the old screen_info,
kexec'ed kernel may attempt to write to an invalid framebuffer
memory region.
There are two screen_info instances globally available, boot_params.screen_info
and screen_info. Later one is a copy, and is updated by drivers.
So let kexec_file_load use the updated copy.
[ mingo: Tidied up the changelog. ]
Signed-off-by: Kairui Song <kasong@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20201014092429.1415040-2-kasong@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 9f5d1c336a upstream.
Gratian managed to trigger the BUG_ON(!newowner) in fixup_pi_state_owner().
This is one possible chain of events leading to this:
Task Prio Operation
T1 120 lock(F)
T2 120 lock(F) -> blocks (top waiter)
T3 50 (RT) lock(F) -> boosts T1 and blocks (new top waiter)
XX timeout/ -> wakes T2
signal
T1 50 unlock(F) -> wakes T3 (rtmutex->owner == NULL, waiter bit is set)
T2 120 cleanup -> try_to_take_mutex() fails because T3 is the top waiter
and the lower priority T2 cannot steal the lock.
-> fixup_pi_state_owner() sees newowner == NULL -> BUG_ON()
The comment states that this is invalid and rt_mutex_real_owner() must
return a non NULL owner when the trylock failed, but in case of a queued
and woken up waiter rt_mutex_real_owner() == NULL is a valid transient
state. The higher priority waiter has simply not yet managed to take over
the rtmutex.
The BUG_ON() is therefore wrong and this is just another retry condition in
fixup_pi_state_owner().
Drop the locks, so that T3 can make progress, and then try the fixup again.
Gratian provided a great analysis, traces and a reproducer. The analysis is
to the point, but it confused the hell out of that tglx dude who had to
page in all the futex horrors again. Condensed version is above.
[ tglx: Wrote comment and changelog ]
Fixes: c1e2f0eaf0 ("futex: Avoid violating the 10th rule of futex")
Reported-by: Gratian Crisan <gratian.crisan@ni.com>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87a6w6x7bb.fsf@ni.com
Link: https://lore.kernel.org/r/87sg9pkvf7.fsf@nanos.tec.linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c1acb4ac1a upstream.
The nesting count of trace_printk allows for 4 levels of nesting. The
nesting counter starts at zero and is incremented before being used to
retrieve the current context's buffer. But the index to the buffer uses the
nesting counter after it was incremented, and not its original number,
which in needs to do.
Link: https://lkml.kernel.org/r/20201029161905.4269-1-hqjagain@gmail.com
Cc: stable@vger.kernel.org
Fixes: 3d9622c12c ("tracing: Add barrier to trace_printk() buffer nesting modification")
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 726b3d3f14 upstream.
When an interrupt or NMI comes in and switches the context, there's a delay
from when the preempt_count() shows the update. As the preempt_count() is
used to detect recursion having each context have its own bit get set when
tracing starts, and if that bit is already set, it is considered a recursion
and the function exits. But if this happens in that section where context
has changed but preempt_count() has not been updated, this will be
incorrectly flagged as a recursion.
To handle this case, create another bit call TRANSITION and test it if the
current context bit is already set. Flag the call as a recursion if the
TRANSITION bit is already set, and if not, set it and continue. The
TRANSITION bit will be cleared normally on the return of the function that
set it, or if the current context bit is clear, set it and clear the
TRANSITION bit to allow for another transition between the current context
and an even higher one.
Cc: stable@vger.kernel.org
Fixes: edc15cafcb ("tracing: Avoid unnecessary multiple recursion checks")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ee11b93f95 upstream.
The code that checks recursion will work to only do the recursion check once
if there's nested checks. The top one will do the check, the other nested
checks will see recursion was already checked and return zero for its "bit".
On the return side, nothing will be done if the "bit" is zero.
The problem is that zero is returned for the "good" bit when in NMI context.
This will set the bit for NMIs making it look like *all* NMI tracing is
recursing, and prevent tracing of anything in NMI context!
The simple fix is to return "bit + 1" and subtract that bit on the end to
get the real bit.
Cc: stable@vger.kernel.org
Fixes: edc15cafcb ("tracing: Avoid unnecessary multiple recursion checks")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b02414c8f0 upstream.
The recursion protection of the ring buffer depends on preempt_count() to be
correct. But it is possible that the ring buffer gets called after an
interrupt comes in but before it updates the preempt_count(). This will
trigger a false positive in the recursion code.
Use the same trick from the ftrace function callback recursion code which
uses a "transition" bit that gets set, to allow for a single recursion for
to handle transitions between contexts.
Cc: stable@vger.kernel.org
Fixes: 567cd4da54 ("ring-buffer: User context bit recursion checking")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit da7d554f7c upstream.
Commit fc0e38dae6 ("GFS2: Fix glock deallocation race") fixed a
sd_glock_disposal accounting bug by adding a missing atomic_dec
statement, but it failed to wake up sd_glock_wait when that decrement
causes sd_glock_disposal to reach zero. As a consequence,
gfs2_gl_hash_clear can now run into a 10-minute timeout instead of
being woken up. Add the missing wakeup.
Fixes: fc0e38dae6 ("GFS2: Fix glock deallocation race")
Cc: stable@vger.kernel.org # v2.6.39+
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f15cfca818 upstream.
The Zoom UAC-2 USB audio interface provides an async playback endpoint
("1 OUT (ASYNC)") and capture endpoint ("2 IN (ASYNC)"), both with
2-channel S32_LE in 44.1, 48, 88.2, 96, 176.4, or 192
kilosamples/s. The device provides explicit feedback to adjust the
host's playback rate, but the feedback appears unstable and biased
relative to the device's capture rate.
"alsaloop -t 1000" experiences playback underruns and tries to
resample the captured audio to match the varying playback
rate. Forcing the kernel to use implicit feedback appears to
produce more stable results. This causes the host to transmit one
playback sample for each capture sample received. (Zoom North America
has been notified of this change.)
Signed-off-by: Keith Winstein <keithw@cs.stanford.edu>
Tested-by: Keith Winstein <keithw@cs.stanford.edu>
Cc: <stable@vger.kernel.org>
BugLink: https://lore.kernel.org/r/20201027071841.GA164525@trolley.csail.mit.edu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9522750c66 upstream.
Commit 6735b4632d ("Fonts: Support FONT_EXTRA_WORDS macros for built-in
fonts") introduced the following error when building rpc_defconfig (only
this build appears to be affected):
`acorndata_8x8' referenced in section `.text' of arch/arm/boot/compressed/ll_char_wr.o:
defined in discarded section `.data' of arch/arm/boot/compressed/font.o
`acorndata_8x8' referenced in section `.data.rel.ro' of arch/arm/boot/compressed/font.o:
defined in discarded section `.data' of arch/arm/boot/compressed/font.o
make[3]: *** [/scratch/linux/arch/arm/boot/compressed/Makefile:191: arch/arm/boot/compressed/vmlinux] Error 1
make[2]: *** [/scratch/linux/arch/arm/boot/Makefile:61: arch/arm/boot/compressed/vmlinux] Error 2
make[1]: *** [/scratch/linux/arch/arm/Makefile:317: zImage] Error 2
The .data section is discarded at link time. Reinstating acorndata_8x8 as
const ensures it is still available after linking. Do the same for the
other 12 built-in fonts as well, for consistency purposes.
Cc: <stable@vger.kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: 6735b4632d ("Fonts: Support FONT_EXTRA_WORDS macros for built-in fonts")
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Co-developed-by: Peilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201102183242.2031659-1-yepeilin.cs@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 496245cac5 upstream.
There is a report in kernel bugzilla about mismatch file type in dir
item and inode item.
This inspires us to check inode mode in inode item.
This patch will check the following members:
- inode key objectid
Should be ROOT_DIR_DIR or [256, (u64)-256] or FREE_INO.
- inode key offset
Should be 0
- inode item generation
- inode item transid
No newer than sb generation + 1.
The +1 is for log tree.
- inode item mode
No unknown bits.
No invalid S_IF* bit.
NOTE: S_IFMT check is not enough, need to check every know type.
- inode item nlink
Dir should have no more link than 1.
- inode item flags
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8bb177d18f upstream.
[BUG]
The following script will cause false alert on devid check.
#!/bin/bash
dev1=/dev/test/test
dev2=/dev/test/scratch1
mnt=/mnt/btrfs
umount $dev1 &> /dev/null
umount $dev2 &> /dev/null
umount $mnt &> /dev/null
mkfs.btrfs -f $dev1
mount $dev1 $mnt
_fail()
{
echo "!!! FAILED !!!"
exit 1
}
for ((i = 0; i < 4096; i++)); do
btrfs dev add -f $dev2 $mnt || _fail
btrfs dev del $dev1 $mnt || _fail
dev_tmp=$dev1
dev1=$dev2
dev2=$dev_tmp
done
[CAUSE]
Tree-checker uses BTRFS_MAX_DEVS() and BTRFS_MAX_DEVS_SYS_CHUNK() as
upper limit for devid. But we can have devid holes just like above
script.
So the check for devid is incorrect and could cause false alert.
[FIX]
Just remove the whole devid check. We don't have any hard requirement
for devid assignment.
Furthermore, even devid could get corrupted by a bitflip, we still have
dev extents verification at mount time, so corrupted data won't sneak
in.
This fixes fstests btrfs/194.
Reported-by: Anand Jain <anand.jain@oracle.com>
Fixes: ab4ba2e133 ("btrfs: tree-checker: Verify dev item")
CC: stable@vger.kernel.org # 5.2+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[bwh: Backported to 4.19: adjust context]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ab4ba2e133 upstream.
[BUG]
For fuzzed image whose DEV_ITEM has invalid total_bytes as 0, then
kernel will just panic:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000098
#PF error: [normal kernel read fault]
PGD 800000022b2bd067 P4D 800000022b2bd067 PUD 22b2bc067 PMD 0
Oops: 0000 [#1] SMP PTI
CPU: 0 PID: 1106 Comm: mount Not tainted 5.0.0-rc8+ #9
RIP: 0010:btrfs_verify_dev_extents+0x2a5/0x5a0
Call Trace:
open_ctree+0x160d/0x2149
btrfs_mount_root+0x5b2/0x680
[CAUSE]
If device extent verification finds a deivce with 0 total_bytes, then it
assumes it's a seed dummy, then search for seed devices.
But in this case, there is no seed device at all, causing NULL pointer.
[FIX]
Since this is caused by fuzzed image, let's go the tree-check way, just
add a new verification for device item.
Reported-by: Yoon Jungyeon <jungyeon@gatech.edu>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=202691
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 075cb3c78f upstream.
Since we have btrfs_check_chunk_valid() in tree-checker, let's do
chunk item verification in tree-checker too.
Since the tree-checker is run at endio time, if one chunk leaf fails
chunk verification, we can still retry the other copy, making btrfs more
robust to fuzzed image as we may still get a good chunk item.
Also since we have done chunk verification in tree block read time, skip
the btrfs_check_chunk_valid() call in read_one_chunk() if we're reading
chunk items from leaf.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f114024376 upstream.
Old error message would be something like:
BTRFS error (device dm-3): invalid chunk num_stipres: 0
New error message would be:
Btrfs critical (device dm-3): corrupt superblock syschunk array: chunk_start=2097152, invalid chunk num_stripes: 0
Or
Btrfs critical (device dm-3): corrupt leaf: root=3 block=8388608 slot=3 chunk_start=2097152, invalid chunk num_stripes: 0
And for certain error message, also output expected value.
The error message levels are changed from error to critical.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[bwh: Cherry-picked for 4.19 to ease backporting later fixes]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 82fc28fbed upstream.
By function, chunk item verification is more suitable to be done inside
tree-checker.
So move btrfs_check_chunk_valid() to tree-checker.c and export it.
And since it's now moved to tree-checker, also add a better comment for
what this function is doing.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[bwh: Cherry-picked for 4.19 to ease backporting later fixes]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b3ff8f1d38 upstream.
[BUG]
There is a fuzzed image which could cause KASAN report at unmount time.
BUG: KASAN: use-after-free in btrfs_queue_work+0x2c1/0x390
Read of size 8 at addr ffff888067cf6848 by task umount/1922
CPU: 0 PID: 1922 Comm: umount Tainted: G W 5.0.21 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
Call Trace:
dump_stack+0x5b/0x8b
print_address_description+0x70/0x280
kasan_report+0x13a/0x19b
btrfs_queue_work+0x2c1/0x390
btrfs_wq_submit_bio+0x1cd/0x240
btree_submit_bio_hook+0x18c/0x2a0
submit_one_bio+0x1be/0x320
flush_write_bio.isra.41+0x2c/0x70
btree_write_cache_pages+0x3bb/0x7f0
do_writepages+0x5c/0x130
__writeback_single_inode+0xa3/0x9a0
writeback_single_inode+0x23d/0x390
write_inode_now+0x1b5/0x280
iput+0x2ef/0x600
close_ctree+0x341/0x750
generic_shutdown_super+0x126/0x370
kill_anon_super+0x31/0x50
btrfs_kill_super+0x36/0x2b0
deactivate_locked_super+0x80/0xc0
deactivate_super+0x13c/0x150
cleanup_mnt+0x9a/0x130
task_work_run+0x11a/0x1b0
exit_to_usermode_loop+0x107/0x130
do_syscall_64+0x1e5/0x280
entry_SYSCALL_64_after_hwframe+0x44/0xa9
[CAUSE]
The fuzzed image has a completely screwd up extent tree:
leaf 29421568 gen 8 total ptrs 6 free space 3587 owner EXTENT_TREE
refs 2 lock (w:0 r:0 bw:0 br:0 sw:0 sr:0) lock_owner 0 current 5938
item 0 key (12587008 168 4096) itemoff 3942 itemsize 53
extent refs 1 gen 9 flags 1
ref#0: extent data backref root 5 objectid 259 offset 0 count 1
item 1 key (12591104 168 8192) itemoff 3889 itemsize 53
extent refs 1 gen 9 flags 1
ref#0: extent data backref root 5 objectid 271 offset 0 count 1
item 2 key (12599296 168 4096) itemoff 3836 itemsize 53
extent refs 1 gen 9 flags 1
ref#0: extent data backref root 5 objectid 259 offset 4096 count 1
item 3 key (29360128 169 0) itemoff 3803 itemsize 33
extent refs 1 gen 9 flags 2
ref#0: tree block backref root 5
item 4 key (29368320 169 1) itemoff 3770 itemsize 33
extent refs 1 gen 9 flags 2
ref#0: tree block backref root 5
item 5 key (29372416 169 0) itemoff 3737 itemsize 33
extent refs 1 gen 9 flags 2
ref#0: tree block backref root 5
Note that leaf 29421568 doesn't have its backref in the extent tree.
Thus extent allocator can re-allocate leaf 29421568 for other trees.
In short, the bug is caused by:
- Existing tree block gets allocated to log tree
This got its generation bumped.
- Log tree balance cleaned dirty bit of offending tree block
It will not be written back to disk, thus no WRITTEN flag.
- Original owner of the tree block gets COWed
Since the tree block has higher transid, no WRITTEN flag, it's reused,
and not traced by transaction::dirty_pages.
- Transaction aborted
Tree blocks get cleaned according to transaction::dirty_pages. But the
offending tree block is not recorded at all.
- Filesystem unmount
All pages are assumed to be are clean, destroying all workqueue, then
call iput(btree_inode).
But offending tree block is still dirty, which triggers writeback, and
causes use-after-free bug.
The detailed sequence looks like this:
- Initial status
eb: 29421568, header=WRITTEN bflags_dirty=0, page_dirty=0, gen=8,
not traced by any dirty extent_iot_tree.
- New tree block is allocated
Since there is no backref for 29421568, it's re-allocated as new tree
block.
Keep in mind that tree block 29421568 is still referred by extent
tree.
- Tree block 29421568 is filled for log tree
eb: 29421568, header=0 bflags_dirty=1, page_dirty=1, gen=9 << (gen bumped)
traced by btrfs_root::dirty_log_pages
- Some log tree operations
Since the fs is using node size 4096, the log tree can easily go a
level higher.
- Log tree needs balance
Tree block 29421568 gets all its content pushed to right, thus now
it is empty, and we don't need it.
btrfs_clean_tree_block() from __push_leaf_right() get called.
eb: 29421568, header=0 bflags_dirty=0, page_dirty=0, gen=9
traced by btrfs_root::dirty_log_pages
- Log tree write back
btree_write_cache_pages() goes through dirty pages ranges, but since
page of tree block 29421568 gets cleaned already, it's not written
back to disk. Thus it doesn't have WRITTEN bit set.
But ranges in dirty_log_pages are cleared.
eb: 29421568, header=0 bflags_dirty=0, page_dirty=0, gen=9
not traced by any dirty extent_iot_tree.
- Extent tree update when committing transaction
Since tree block 29421568 has transid equal to running trans, and has
no WRITTEN bit, should_cow_block() will use it directly without adding
it to btrfs_transaction::dirty_pages.
eb: 29421568, header=0 bflags_dirty=1, page_dirty=1, gen=9
not traced by any dirty extent_iot_tree.
At this stage, we're doomed. We have a dirty eb not tracked by any
extent io tree.
- Transaction gets aborted due to corrupted extent tree
Btrfs cleans up dirty pages according to transaction::dirty_pages and
btrfs_root::dirty_log_pages.
But since tree block 29421568 is not tracked by neither of them, it's
still dirty.
eb: 29421568, header=0 bflags_dirty=1, page_dirty=1, gen=9
not traced by any dirty extent_iot_tree.
- Filesystem unmount
Since all cleanup is assumed to be done, all workqueus are destroyed.
Then iput(btree_inode) is called, expecting no dirty pages.
But tree 29421568 is still dirty, thus triggering writeback.
Since all workqueues are already freed, we cause use-after-free.
This shows us that, log tree blocks + bad extent tree can cause wild
dirty pages.
[FIX]
To fix the problem, don't submit any btree write bio if the filesytem
has any error. This is the last safe net, just in case other cleanup
haven't caught catch it.
Link: https://github.com/bobfuzzer/CVE/tree/master/CVE-2019-19377
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[bwh: Backported to 4.19: fs_info variable already exists in
btree_write_cache_pages()]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 18dfa7117a upstream.
The lock_extent_buffer_io() returns 1 to the caller to tell it everything
went fine and the callers needs to start writeback for the extent buffer
(submit a bio, etc), 0 to tell the caller everything went fine but it does
not need to start writeback for the extent buffer, and a negative value if
some error happened.
When it's about to return 1 it tries to lock all pages, and if a try lock
on a page fails, and we didn't flush any existing bio in our "epd", it
calls flush_write_bio(epd) and overwrites the return value of 1 to 0 or
an error. The page might have been locked elsewhere, not with the goal
of starting writeback of the extent buffer, and even by some code other
than btrfs, like page migration for example, so it does not mean the
writeback of the extent buffer was already started by some other task,
so returning a 0 tells the caller (btree_write_cache_pages()) to not
start writeback for the extent buffer. Note that epd might currently have
either no bio, so flush_write_bio() returns 0 (success) or it might have
a bio for another extent buffer with a lower index (logical address).
Since we return 0 with the EXTENT_BUFFER_WRITEBACK bit set on the
extent buffer and writeback is never started for the extent buffer,
future attempts to writeback the extent buffer will hang forever waiting
on that bit to be cleared, since it can only be cleared after writeback
completes. Such hang is reported with a trace like the following:
[49887.347053] INFO: task btrfs-transacti:1752 blocked for more than 122 seconds.
[49887.347059] Not tainted 5.2.13-gentoo #2
[49887.347060] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[49887.347062] btrfs-transacti D 0 1752 2 0x80004000
[49887.347064] Call Trace:
[49887.347069] ? __schedule+0x265/0x830
[49887.347071] ? bit_wait+0x50/0x50
[49887.347072] ? bit_wait+0x50/0x50
[49887.347074] schedule+0x24/0x90
[49887.347075] io_schedule+0x3c/0x60
[49887.347077] bit_wait_io+0x8/0x50
[49887.347079] __wait_on_bit+0x6c/0x80
[49887.347081] ? __lock_release.isra.29+0x155/0x2d0
[49887.347083] out_of_line_wait_on_bit+0x7b/0x80
[49887.347084] ? var_wake_function+0x20/0x20
[49887.347087] lock_extent_buffer_for_io+0x28c/0x390
[49887.347089] btree_write_cache_pages+0x18e/0x340
[49887.347091] do_writepages+0x29/0xb0
[49887.347093] ? kmem_cache_free+0x132/0x160
[49887.347095] ? convert_extent_bit+0x544/0x680
[49887.347097] filemap_fdatawrite_range+0x70/0x90
[49887.347099] btrfs_write_marked_extents+0x53/0x120
[49887.347100] btrfs_write_and_wait_transaction.isra.4+0x38/0xa0
[49887.347102] btrfs_commit_transaction+0x6bb/0x990
[49887.347103] ? start_transaction+0x33e/0x500
[49887.347105] transaction_kthread+0x139/0x15c
So fix this by not overwriting the return value (ret) with the result
from flush_write_bio(). We also need to clear the EXTENT_BUFFER_WRITEBACK
bit in case flush_write_bio() returns an error, otherwise it will hang
any future attempts to writeback the extent buffer, and undo all work
done before (set back EXTENT_BUFFER_DIRTY, etc).
This is a regression introduced in the 5.2 kernel.
Fixes: 2e3c25136a ("btrfs: extent_io: add proper error handling to lock_extent_buffer_for_io()")
Fixes: f4340622e0 ("btrfs: extent_io: Move the BUG_ON() in flush_write_bio() one level up")
Reported-by: Zdenek Sojka <zsojka@seznam.cz>
Link: https://lore.kernel.org/linux-btrfs/GpO.2yos.3WGDOLpx6t%7D.1TUDYM@seznam.cz/T/#u
Reported-by: Stefan Priebe - Profihost AG <s.priebe@profihost.ag>
Link: https://lore.kernel.org/linux-btrfs/5c4688ac-10a7-fb07-70e8-c5d31a3fbb38@profihost.ag/T/#t
Reported-by: Drazen Kacar <drazen.kacar@oradian.com>
Link: https://lore.kernel.org/linux-btrfs/DB8PR03MB562876ECE2319B3E579590F799C80@DB8PR03MB5628.eurprd03.prod.outlook.com/
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204377
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2e3c25136a upstream.
This function needs some extra checks on locked pages and eb. For error
handling we need to unlock locked pages and the eb.
There is a rare >0 return value branch, where all pages get locked
while write bio is not flushed.
Thankfully it's handled by the only caller, btree_write_cache_pages(),
as later write_one_eb() call will trigger submit_one_bio(). So there
shouldn't be any problem.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2b952eea81 upstream.
In btree_write_cache_pages(), we can only get @ret <= 0.
Add an ASSERT() for it just in case.
Then instead of submitting the write bio even we got some error, check
the return value first.
If we have already hit some error, just clean up the corrupted or
half-baked bio, and return error.
If there is no error so far, then call flush_write_bio() and return the
result.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3065976b04 upstream.
Since now flush_write_bio() could return error, kill the BUG_ON() first.
Then don't call flush_write_bio() unconditionally, instead we check the
return value from __extent_writepage() first.
If __extent_writepage() fails, we do cleanup, and return error without
submitting the possible corrupted or half-baked bio.
If __extent_writepage() successes, then we call flush_write_bio() and
return the result.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 42ffb0bf58 upstream.
There exists a deadlock with range_cyclic that has existed forever. If
we loop around with a bio already built we could deadlock with a writer
who has the page locked that we're attempting to write but is waiting on
a page in our bio to be written out. The task traces are as follows
PID: 1329874 TASK: ffff889ebcdf3800 CPU: 33 COMMAND: "kworker/u113:5"
#0 [ffffc900297bb658] __schedule at ffffffff81a4c33f
#1 [ffffc900297bb6e0] schedule at ffffffff81a4c6e3
#2 [ffffc900297bb6f8] io_schedule at ffffffff81a4ca42
#3 [ffffc900297bb708] __lock_page at ffffffff811f145b
#4 [ffffc900297bb798] __process_pages_contig at ffffffff814bc502
#5 [ffffc900297bb8c8] lock_delalloc_pages at ffffffff814bc684
#6 [ffffc900297bb900] find_lock_delalloc_range at ffffffff814be9ff
#7 [ffffc900297bb9a0] writepage_delalloc at ffffffff814bebd0
#8 [ffffc900297bba18] __extent_writepage at ffffffff814bfbf2
#9 [ffffc900297bba98] extent_write_cache_pages at ffffffff814bffbd
PID: 2167901 TASK: ffff889dc6a59c00 CPU: 14 COMMAND:
"aio-dio-invalid"
#0 [ffffc9003b50bb18] __schedule at ffffffff81a4c33f
#1 [ffffc9003b50bba0] schedule at ffffffff81a4c6e3
#2 [ffffc9003b50bbb8] io_schedule at ffffffff81a4ca42
#3 [ffffc9003b50bbc8] wait_on_page_bit at ffffffff811f24d6
#4 [ffffc9003b50bc60] prepare_pages at ffffffff814b05a7
#5 [ffffc9003b50bcd8] btrfs_buffered_write at ffffffff814b1359
#6 [ffffc9003b50bdb0] btrfs_file_write_iter at ffffffff814b5933
#7 [ffffc9003b50be38] new_sync_write at ffffffff8128f6a8
#8 [ffffc9003b50bec8] vfs_write at ffffffff81292b9d
#9 [ffffc9003b50bf00] ksys_pwrite64 at ffffffff81293032
I used drgn to find the respective pages we were stuck on
page_entry.page 0xffffea00fbfc7500 index 8148 bit 15 pid 2167901
page_entry.page 0xffffea00f9bb7400 index 7680 bit 0 pid 1329874
As you can see the kworker is waiting for bit 0 (PG_locked) on index
7680, and aio-dio-invalid is waiting for bit 15 (PG_writeback) on index
8148. aio-dio-invalid has 7680, and the kworker epd looks like the
following
crash> struct extent_page_data ffffc900297bbbb0
struct extent_page_data {
bio = 0xffff889f747ed830,
tree = 0xffff889eed6ba448,
extent_locked = 0,
sync_io = 0
}
Probably worth mentioning as well that it waits for writeback of the
page to complete while holding a lock on it (at prepare_pages()).
Using drgn I walked the bio pages looking for page
0xffffea00fbfc7500 which is the one we're waiting for writeback on
bio = Object(prog, 'struct bio', address=0xffff889f747ed830)
for i in range(0, bio.bi_vcnt.value_()):
bv = bio.bi_io_vec[i]
if bv.bv_page.value_() == 0xffffea00fbfc7500:
print("FOUND IT")
which validated what I suspected.
The fix for this is simple, flush the epd before we loop back around to
the beginning of the file during writeout.
Fixes: b293f02e14 ("Btrfs: Add writepages support")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 860473714c. That
has an incorrect upstream commit reference, and was modified in a way
that conflicts with some older fixes. We can cleanly cherry-pick the
upstream commit *after* those fixes.
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f4340622e0 upstream.
We have a BUG_ON() in flush_write_bio() to handle the return value of
submit_one_bio().
Move the BUG_ON() one level up to all its callers.
This patch will introduce temporary variable, @flush_ret to keep code
change minimal in this patch. That variable will be cleaned up when
enhancing the error handling later.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[bwh: Cherry-picked for 4.19 to ease backporting later fixes]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bb58eb9e16 upstream.
There is no need to forward declare flush_write_bio(), as it only
depends on submit_one_bio(). Both of them are pretty small, just move
them to kill the forward declaration.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[bwh: Cherry-picked for 4.19 to ease backporting later fixes]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bad8e64fb1 upstream.
On commit 6ac93117ab ("blktrace: use existing disk debugfs directory")
merged on v4.12 Omar fixed the original blktrace code for request-based
drivers (multiqueue). This however left in place a possible crash, if you
happen to abuse blktrace while racing to remove / add a device.
We used to use asynchronous removal of the request_queue, and with that
the issue was easier to reproduce. Now that we have reverted to
synchronous removal of the request_queue, the issue is still possible to
reproduce, its however just a bit more difficult.
We essentially run two instances of break-blktrace which add/remove
a loop device, and setup a blktrace and just never tear the blktrace
down. We do this twice in parallel. This is easily reproduced with the
script run_0004.sh from break-blktrace [0].
We can end up with two types of panics each reflecting where we
race, one a failed blktrace setup:
[ 252.426751] debugfs: Directory 'loop0' with parent 'block' already present!
[ 252.432265] BUG: kernel NULL pointer dereference, address: 00000000000000a0
[ 252.436592] #PF: supervisor write access in kernel mode
[ 252.439822] #PF: error_code(0x0002) - not-present page
[ 252.442967] PGD 0 P4D 0
[ 252.444656] Oops: 0002 [#1] SMP NOPTI
[ 252.446972] CPU: 10 PID: 1153 Comm: break-blktrace Tainted: G E 5.7.0-rc2-next-20200420+ #164
[ 252.452673] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014
[ 252.456343] RIP: 0010:down_write+0x15/0x40
[ 252.458146] Code: eb ca e8 ae 22 8d ff cc cc cc cc cc cc cc cc cc cc cc cc
cc cc 0f 1f 44 00 00 55 48 89 fd e8 52 db ff ff 31 c0 ba 01 00
00 00 <f0> 48 0f b1 55 00 75 0f 48 8b 04 25 c0 8b 01 00 48 89
45 08 5d
[ 252.463638] RSP: 0018:ffffa626415abcc8 EFLAGS: 00010246
[ 252.464950] RAX: 0000000000000000 RBX: ffff958c25f0f5c0 RCX: ffffff8100000000
[ 252.466727] RDX: 0000000000000001 RSI: ffffff8100000000 RDI: 00000000000000a0
[ 252.468482] RBP: 00000000000000a0 R08: 0000000000000000 R09: 0000000000000001
[ 252.470014] R10: 0000000000000000 R11: ffff958d1f9227ff R12: 0000000000000000
[ 252.471473] R13: ffff958c25ea5380 R14: ffffffff8cce15f1 R15: 00000000000000a0
[ 252.473346] FS: 00007f2e69dee540(0000) GS:ffff958c2fc80000(0000) knlGS:0000000000000000
[ 252.475225] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 252.476267] CR2: 00000000000000a0 CR3: 0000000427d10004 CR4: 0000000000360ee0
[ 252.477526] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 252.478776] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 252.479866] Call Trace:
[ 252.480322] simple_recursive_removal+0x4e/0x2e0
[ 252.481078] ? debugfs_remove+0x60/0x60
[ 252.481725] ? relay_destroy_buf+0x77/0xb0
[ 252.482662] debugfs_remove+0x40/0x60
[ 252.483518] blk_remove_buf_file_callback+0x5/0x10
[ 252.484328] relay_close_buf+0x2e/0x60
[ 252.484930] relay_open+0x1ce/0x2c0
[ 252.485520] do_blk_trace_setup+0x14f/0x2b0
[ 252.486187] __blk_trace_setup+0x54/0xb0
[ 252.486803] blk_trace_ioctl+0x90/0x140
[ 252.487423] ? do_sys_openat2+0x1ab/0x2d0
[ 252.488053] blkdev_ioctl+0x4d/0x260
[ 252.488636] block_ioctl+0x39/0x40
[ 252.489139] ksys_ioctl+0x87/0xc0
[ 252.489675] __x64_sys_ioctl+0x16/0x20
[ 252.490380] do_syscall_64+0x52/0x180
[ 252.491032] entry_SYSCALL_64_after_hwframe+0x44/0xa9
And the other on the device removal:
[ 128.528940] debugfs: Directory 'loop0' with parent 'block' already present!
[ 128.615325] BUG: kernel NULL pointer dereference, address: 00000000000000a0
[ 128.619537] #PF: supervisor write access in kernel mode
[ 128.622700] #PF: error_code(0x0002) - not-present page
[ 128.625842] PGD 0 P4D 0
[ 128.627585] Oops: 0002 [#1] SMP NOPTI
[ 128.629871] CPU: 12 PID: 544 Comm: break-blktrace Tainted: G E 5.7.0-rc2-next-20200420+ #164
[ 128.635595] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014
[ 128.640471] RIP: 0010:down_write+0x15/0x40
[ 128.643041] Code: eb ca e8 ae 22 8d ff cc cc cc cc cc cc cc cc cc cc cc cc
cc cc 0f 1f 44 00 00 55 48 89 fd e8 52 db ff ff 31 c0 ba 01 00
00 00 <f0> 48 0f b1 55 00 75 0f 65 48 8b 04 25 c0 8b 01 00 48 89
45 08 5d
[ 128.650180] RSP: 0018:ffffa9c3c05ebd78 EFLAGS: 00010246
[ 128.651820] RAX: 0000000000000000 RBX: ffff8ae9a6370240 RCX: ffffff8100000000
[ 128.653942] RDX: 0000000000000001 RSI: ffffff8100000000 RDI: 00000000000000a0
[ 128.655720] RBP: 00000000000000a0 R08: 0000000000000002 R09: ffff8ae9afd2d3d0
[ 128.657400] R10: 0000000000000056 R11: 0000000000000000 R12: 0000000000000000
[ 128.659099] R13: 0000000000000000 R14: 0000000000000003 R15: 00000000000000a0
[ 128.660500] FS: 00007febfd995540(0000) GS:ffff8ae9afd00000(0000) knlGS:0000000000000000
[ 128.662204] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 128.663426] CR2: 00000000000000a0 CR3: 0000000420042003 CR4: 0000000000360ee0
[ 128.664776] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 128.666022] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 128.667282] Call Trace:
[ 128.667801] simple_recursive_removal+0x4e/0x2e0
[ 128.668663] ? debugfs_remove+0x60/0x60
[ 128.669368] debugfs_remove+0x40/0x60
[ 128.669985] blk_trace_free+0xd/0x50
[ 128.670593] __blk_trace_remove+0x27/0x40
[ 128.671274] blk_trace_shutdown+0x30/0x40
[ 128.671935] blk_release_queue+0x95/0xf0
[ 128.672589] kobject_put+0xa5/0x1b0
[ 128.673188] disk_release+0xa2/0xc0
[ 128.673786] device_release+0x28/0x80
[ 128.674376] kobject_put+0xa5/0x1b0
[ 128.674915] loop_remove+0x39/0x50 [loop]
[ 128.675511] loop_control_ioctl+0x113/0x130 [loop]
[ 128.676199] ksys_ioctl+0x87/0xc0
[ 128.676708] __x64_sys_ioctl+0x16/0x20
[ 128.677274] do_syscall_64+0x52/0x180
[ 128.677823] entry_SYSCALL_64_after_hwframe+0x44/0xa9
The common theme here is:
debugfs: Directory 'loop0' with parent 'block' already present
This crash happens because of how blktrace uses the debugfs directory
where it places its files. Upon init we always create the same directory
which would be needed by blktrace but we only do this for make_request
drivers (multiqueue) block drivers. When you race a removal of these
devices with a blktrace setup you end up in a situation where the
make_request recursive debugfs removal will sweep away the blktrace
files and then later blktrace will also try to remove individual
dentries which are already NULL. The inverse is also possible and hence
the two types of use after frees.
We don't create the block debugfs directory on init for these types of
block devices:
* request-based block driver block devices
* every possible partition
* scsi-generic
And so, this race should in theory only be possible with make_request
drivers.
We can fix the UAF by simply re-using the debugfs directory for
make_request drivers (multiqueue) and only creating the ephemeral
directory for the other type of block devices. The new clarifications
on relying on the q->blk_trace_mutex *and* also checking for q->blk_trace
*prior* to processing a blktrace ensures the debugfs directories are
only created if no possible directory name clashes are possible.
This goes tested with:
o nvme partitions
o ISCSI with tgt, and blktracing against scsi-generic with:
o block
o tape
o cdrom
o media changer
o blktests
This patch is part of the work which disputes the severity of
CVE-2019-19770 which shows this issue is not a core debugfs issue, but
a misuse of debugfs within blktace.
Fixes: 6ac93117ab ("blktrace: use existing disk debugfs directory")
Reported-by: syzbot+603294af2d01acfdd6da@syzkaller.appspotmail.com
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Omar Sandoval <osandov@fb.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Nicolai Stange <nstange@suse.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: yu kuai <yukuai3@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
[bwh: Backported to 4.19: open-code queue_is_mq()]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
