[ Upstream commit af14f3007e ]
Make sure LSR flags are preserved in dw8250_tx_wait_empty(). This
function is called from a low-level out function and therefore cannot
call serial_lsr_in() as it would lead to infinite recursion.
It is borderline if the flags need to be saved here at all since this
code relates to writing LCR register which usually implies no important
characters should be arriving.
Fixes: 914eaf935e ("serial: 8250_dw: Allow TX FIFO to drain before writing to UART_LCR")
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220608095431.18376-7-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 82fa8f581a ]
As i2c_add_driver could return error if fails, it should be
better to check the return value.
However, if the CONFIG_I2C and CONFIG_SPI_MASTER are both true,
the return value of i2c_add_driver will be covered by
spi_register_driver.
Therefore, it is necessary to add check and return error if fails.
Fixes: aa0e25caaf ("ASoC: da7210: Add support for spi regmap")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20220531094712.2376759-1-jiasheng@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4ea9496cbc ]
dev_pm_domain_attach_by_name() may return NULL in some cases,
so IS_ERR() doesn't meet the requirements. Thus fix it.
Fixes: 6319aee10e ("opp: Attach genpds to devices from within OPP core")
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
[ Viresh: Replace ENODATA with ENODEV ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 07ea7a617d ]
When migrating to extents, the checksum seed of temporary inode
need to be replaced by inode's, otherwise the inode checksums
will be incorrect when swapping the inodes data.
However, the temporary inode can not match it's checksum to
itself since it has lost it's own checksum seed.
mkfs.ext4 -F /dev/sdc
mount /dev/sdc /mnt/sdc
xfs_io -fc "pwrite 4k 4k" -c "fsync" /mnt/sdc/testfile
chattr -e /mnt/sdc/testfile
chattr +e /mnt/sdc/testfile
umount /dev/sdc
fsck -fn /dev/sdc
========
...
Pass 1: Checking inodes, blocks, and sizes
Inode 13 passes checks, but checksum does not match inode. Fix? no
...
========
The fix is simple, save the checksum seed of temporary inode, and
recover it after migrating to extents.
Fixes: e81c9302a6 ("ext4: set csum seed in tmp inode while migrating to extents")
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220617062515.2113438-1-lilingfeng3@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a89573ce4a ]
We catch an assert problem in jbd2_journal_commit_transaction() when
doing fsstress and request falut injection tests. The problem is
happened in a race condition between jbd2_journal_commit_transaction()
and ext4_end_io_end(). Firstly, ext4_writepages() writeback dirty pages
and start reserved handle, and then the journal was aborted due to some
previous metadata IO error, jbd2_journal_abort() start to commit current
running transaction, the committing procedure could be raced by
ext4_end_io_end() and lead to subtract j_reserved_credits twice from
commit_transaction->t_outstanding_credits, finally the
t_outstanding_credits is mistakenly smaller than t_nr_buffers and
trigger assert.
kjournald2 kworker
jbd2_journal_commit_transaction()
write_unlock(&journal->j_state_lock);
atomic_sub(j_reserved_credits, t_outstanding_credits); //sub once
jbd2_journal_start_reserved()
start_this_handle() //detect aborted journal
jbd2_journal_free_reserved() //get running transaction
read_lock(&journal->j_state_lock)
__jbd2_journal_unreserve_handle()
atomic_sub(j_reserved_credits, t_outstanding_credits);
//sub again
read_unlock(&journal->j_state_lock);
journal->j_running_transaction = NULL;
J_ASSERT(t_nr_buffers <= t_outstanding_credits) //bomb!!!
Fix this issue by using journal->j_state_lock to protect the subtraction
in jbd2_journal_commit_transaction().
Fixes: 96f1e09745 ("jbd2: avoid long hold times of j_state_lock while committing a transaction")
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220611130426.2013258-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd5382c580 ]
In the function rxe_create_qp(), rxe_qp_from_init() is called to
initialize qp, internally things like the spin locks are not setup until
rxe_qp_init_req().
If an error occures before this point then the unwind will call
rxe_cleanup() and eventually to rxe_qp_do_cleanup()/rxe_cleanup_task()
which will oops when trying to access the uninitialized spinlock.
Move the spinlock initializations earlier before any failures.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20220731063621.298405-1-yanjun.zhu@linux.dev
Reported-by: syzbot+833061116fa28df97f3b@syzkaller.appspotmail.com
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f82f92231 ]
Since the beginning, charged is set to 0 to avoid calling vm_unacct_memory
twice because vm_unacct_memory will be called by above unmap_region. But
since commit 4f74d2c8e8 ("vm: remove 'nr_accounted' calculations from
the unmap_vmas() interfaces"), unmap_region doesn't call vm_unacct_memory
anymore. So charged shouldn't be set to 0 now otherwise the calling to
paired vm_unacct_memory will be missed and leads to imbalanced account.
Link: https://lkml.kernel.org/r/20220618082027.43391-1-linmiaohe@huawei.com
Fixes: 4f74d2c8e8 ("vm: remove 'nr_accounted' calculations from the unmap_vmas() interfaces")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 40ec787e1a ]
The call to:
size = simple_write_to_buffer(cmdbuf, sizeof(cmdbuf), ppos, buf, size);
will succeed if at least one byte is written to the "cmdbuf" buffer.
The "*ppos" value controls which byte is written. Another problem is
that this code does not check for errors so it's possible for the entire
buffer to be uninitialized.
Inintialize the struct to zero to prevent reading uninitialized stack
data.
Debugfs is normally only writable by root so the impact of this bug is
very minimal.
Fixes: 6cca83d498 ("Platform: OLPC: move debugfs support from x86 EC driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YthIKn+TfZSZMEcM@kili
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 688ee1d178 ]
Fix up the tty-port initialized comments which got truncated and
obfuscated when replacing the old ASYNCB_INITIALIZED flag.
Fixes: d41861ca19 ("tty: Replace ASYNC_INITIALIZED bit and update atomically")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6646e99bce ]
As part of Root Port interrupt handling, level-0 register is read first and
based on the bits set in that, corresponding level-1 registers are read for
further interrupt processing. Since both these values are currently read
into the same 'val' variable, checking level-0 bits the second time around
is happening on the 'val' variable value of level-1 register contents
instead of freshly reading the level-0 value again.
Fix by using different variables to store level-0 and level-1 registers
contents.
Link: https://lore.kernel.org/r/20220721142052.25971-11-vidyas@nvidia.com
Fixes: 56e15a238d ("PCI: tegra: Add Tegra194 PCIe support")
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1117d182c5 ]
U1_UNICORN_LEGACY id was added to the driver, but was not declared
in the device id table, making it impossible to use.
Fixes: 640e403 ("HID: alps: Add AUI1657 device ID")
Signed-off-by: Artem Borisov <dedsa2002@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5d07a692f9 ]
We should use of_node_get() when a new reference of device_node
is created. It is noted that the old reference stored in
'mm_gc->gc.of_node' should also be decreased.
This patch is based on the fact that there is a call site in function
'qe_add_gpiochips()' of src file 'drivers\soc\fsl\qe\gpio.c'. In this
function, of_mm_gpiochip_add_data() is contained in an iteration of
for_each_compatible_node() which will automatically increase and
decrease the refcount. So we need additional of_node_get() for the
reference escape in of_mm_gpiochip_add_data().
Fixes: a19e3da5bc ("of/gpio: Kill of_gpio_chip and add members directly to gpio_chip")
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3056fc6c32 ]
If siw_recv_mpa_rr returns -EAGAIN, it means that the MPA reply hasn't
been received completely, and should not report IW_CM_EVENT_CONNECT_REPLY
in this case. This may trigger a call trace in iw_cm. A simple way to
trigger this:
server: ib_send_lat
client: ib_send_lat -R <server_ip>
The call trace looks like this:
kernel BUG at drivers/infiniband/core/iwcm.c:894!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
<...>
Workqueue: iw_cm_wq cm_work_handler [iw_cm]
Call Trace:
<TASK>
cm_work_handler+0x1dd/0x370 [iw_cm]
process_one_work+0x1e2/0x3b0
worker_thread+0x49/0x2e0
? rescuer_thread+0x370/0x370
kthread+0xe5/0x110
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x1f/0x30
</TASK>
Fixes: 6c52fdc244 ("rdma/siw: connection management")
Link: https://lore.kernel.org/r/dae34b5fd5c2ea2bd9744812c1d2653a34a94c67.1657706960.git.chengyou@linux.alibaba.com
Signed-off-by: Cheng Xu <chengyou@linux.alibaba.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 69695aeaa6 ]
Correct a SOP READ and WRITE DMA flags for some requests.
This update corrects DMA direction issues with SCSI commands removed from
the controller's internal lookup table.
Currently, SCSI READ BLOCK LIMITS (0x5) was removed from the controller
lookup table and exposed a DMA direction flag issue.
SCSI READ BLOCK LIMITS was recently removed from our controller lookup
table so the controller uses the respective IU flag field to set the DMA
data direction. Since the DMA direction is incorrect the FW never completes
the request causing a hang.
Some SCSI commands which use SCSI READ BLOCK LIMITS
* sg_map
* mt -f /dev/stX status
After updating controller firmware, users may notice their tape units
failing. This patch resolves the issue.
Also, the AIO path DMA direction is correct.
The DMA direction flag is a day-one bug with no reported BZ.
Fixes: 6c223761eb ("smartpqi: initial commit of Microsemi smartpqi driver")
Link: https://lore.kernel.org/r/165730605618.177165.9054223644512926624.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6a0c054930 ]
There are sleep in atomic context bugs when dm_fsync_timer_callback is
executing. The root cause is that the memory allocation functions with
GFP_KERNEL or GFP_NOIO parameters are called in dm_fsync_timer_callback
which is a timer handler. The call paths that could trigger bugs are
shown below:
(interrupt context)
dm_fsync_timer_callback
write_nic_byte
kzalloc(sizeof(data), GFP_KERNEL); //may sleep
usb_control_msg
kmalloc(.., GFP_NOIO); //may sleep
write_nic_dword
kzalloc(sizeof(data), GFP_KERNEL); //may sleep
usb_control_msg
kmalloc(.., GFP_NOIO); //may sleep
This patch uses delayed work to replace timer and moves the operations
that may sleep into the delayed work in order to mitigate bugs.
Fixes: 8fc8598e61 ("Staging: Added Realtek rtl8192u driver to staging")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20220710103002.63283-1-duoming@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit df64077829 ]
The bus sdw_drv_remove() and sdw_drv_shutdown() helpers are used
conditionally, if the driver provides these routines.
These helpers already test if the driver provides a .remove or
.shutdown callback, so there's no harm in invoking the
sdw_drv_remove() and sdw_drv_shutdown() unconditionally.
In addition, the current code is imbalanced with
dev_pm_domain_attach() called from sdw_drv_probe(), but
dev_pm_domain_detach() called from sdw_drv_remove() only if the driver
provides a .remove callback.
Fixes: 9251345dca ("soundwire: Add SoundWire bus type")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220610015105.25987-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2bd357e698 ]
Currently, attempting to enable the UBI clocks will cause the stuck at
off warning to be printed and clk_enable will fail.
[ 14.936694] gcc_ubi1_ahb_clk status stuck at 'off'
Downstream 5.4 QCA kernel has fixed this by seting the BRANCH_HALT_DELAY
flag on UBI clocks, so lets do the same.
Fixes: 5736294aef ("clk: qcom: ipq8074: add NSS clocks")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220515210048.483898-6-robimarko@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0e9e61a281 ]
NSS port 5 and 6 frequency tables are currently broken and are causing a
wide ranges of issue like 1G not working at all on port 6 or port 5 being
clocked with 312 instead of 125 MHz as UNIPHY1 gets selected.
So, update the frequency tables with the ones from the downstream QCA 5.4
based kernel which has already fixed this.
Fixes: 7117a51ed3 ("clk: qcom: ipq8074: add NSS ethernet port clocks")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220515210048.483898-3-robimarko@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 70fe758352 ]
In __driver_attach function, There are also AA deadlock problem,
like the commit b232b02bf3 ("driver core: fix deadlock in
__device_attach").
stack like commit b232b02bf3 ("driver core: fix deadlock in
__device_attach").
list below:
In __driver_attach function, The lock holding logic is as follows:
...
__driver_attach
if (driver_allows_async_probing(drv))
device_lock(dev) // get lock dev
async_schedule_dev(__driver_attach_async_helper, dev); // func
async_schedule_node
async_schedule_node_domain(func)
entry = kzalloc(sizeof(struct async_entry), GFP_ATOMIC);
/* when fail or work limit, sync to execute func, but
__driver_attach_async_helper will get lock dev as
will, which will lead to A-A deadlock. */
if (!entry || atomic_read(&entry_count) > MAX_WORK) {
func;
else
queue_work_node(node, system_unbound_wq, &entry->work)
device_unlock(dev)
As above show, when it is allowed to do async probes, because of
out of memory or work limit, async work is not be allowed, to do
sync execute instead. it will lead to A-A deadlock because of
__driver_attach_async_helper getting lock dev.
Reproduce:
and it can be reproduce by make the condition
(if (!entry || atomic_read(&entry_count) > MAX_WORK)) untenable, like
below:
[ 370.785650] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables
this message.
[ 370.787154] task:swapper/0 state:D stack: 0 pid: 1 ppid:
0 flags:0x00004000
[ 370.788865] Call Trace:
[ 370.789374] <TASK>
[ 370.789841] __schedule+0x482/0x1050
[ 370.790613] schedule+0x92/0x1a0
[ 370.791290] schedule_preempt_disabled+0x2c/0x50
[ 370.792256] __mutex_lock.isra.0+0x757/0xec0
[ 370.793158] __mutex_lock_slowpath+0x1f/0x30
[ 370.794079] mutex_lock+0x50/0x60
[ 370.794795] __device_driver_lock+0x2f/0x70
[ 370.795677] ? driver_probe_device+0xd0/0xd0
[ 370.796576] __driver_attach_async_helper+0x1d/0xd0
[ 370.797318] ? driver_probe_device+0xd0/0xd0
[ 370.797957] async_schedule_node_domain+0xa5/0xc0
[ 370.798652] async_schedule_node+0x19/0x30
[ 370.799243] __driver_attach+0x246/0x290
[ 370.799828] ? driver_allows_async_probing+0xa0/0xa0
[ 370.800548] bus_for_each_dev+0x9d/0x130
[ 370.801132] driver_attach+0x22/0x30
[ 370.801666] bus_add_driver+0x290/0x340
[ 370.802246] driver_register+0x88/0x140
[ 370.802817] ? virtio_scsi_init+0x116/0x116
[ 370.803425] scsi_register_driver+0x1a/0x30
[ 370.804057] init_sd+0x184/0x226
[ 370.804533] do_one_initcall+0x71/0x3a0
[ 370.805107] kernel_init_freeable+0x39a/0x43a
[ 370.805759] ? rest_init+0x150/0x150
[ 370.806283] kernel_init+0x26/0x230
[ 370.806799] ret_from_fork+0x1f/0x30
To fix the deadlock, move the async_schedule_dev outside device_lock,
as we can see, in async_schedule_node_domain, the parameter of
queue_work_node is system_unbound_wq, so it can accept concurrent
operations. which will also not change the code logic, and will
not lead to deadlock.
Fixes: ef0ff68351 ("driver core: Probe devices asynchronously instead of the driver")
Signed-off-by: Zhang Wensheng <zhangwensheng5@huawei.com>
Link: https://lore.kernel.org/r/20220622074327.497102-1-zhangwensheng5@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a61528d997 ]
There is a deadlock between sm_release and sm_cache_flush_work
which is a work item. The cancel_work_sync in sm_release will
not return until sm_cache_flush_work is finished. If we hold
mutex_lock and use cancel_work_sync to wait the work item to
finish, the work item also requires mutex_lock. As a result,
the sm_release will be blocked forever. The race condition is
shown below:
(Thread 1) | (Thread 2)
sm_release |
mutex_lock(&ftl->mutex) | sm_cache_flush_work
| mutex_lock(&ftl->mutex)
cancel_work_sync | ...
This patch moves del_timer_sync and cancel_work_sync out of
mutex_lock in order to mitigate deadlock.
Fixes: 7d17c02a01 ("mtd: Add new SmartMedia/xD FTL")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220524044841.10517-1-duoming@zju.edu.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 381583845d ]
Smatch warnings:
drivers/hid/hid-cp2112.c:793 cp2112_xfer() error: __memcpy()
'data->block[1]' too small (33 vs 255)
drivers/hid/hid-cp2112.c:793 cp2112_xfer() error: __memcpy() 'buf' too
small (64 vs 255)
The 'read_length' variable is provided by 'data->block[0]' which comes
from user and it(read_length) can take a value between 0-255. Add an
upper bound to 'read_length' variable to prevent a buffer overflow in
memcpy().
Fixes: 542134c037 ("HID: cp2112: Fix I2C_BLOCK_DATA transactions")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
