[ Upstream commit e908f58b6beb337cbe4481d52c3f5c78167b1aab ]
In the below noted Fixes commit we introduced a reflck mutex to allow
better scaling between devices for open and close. The reflck was
based on the hot reset granularity, device level for root bus devices
which cannot support hot reset or bus/slot reset otherwise. Overlooked
in this were SR-IOV VFs, where there's also no bus reset option, but
the default for a non-root-bus, non-slot-based device is bus level
reflck granularity.
The reflck mutex has since become the dev_set mutex (via commit
2cd8b14aaa ("vfio/pci: Move to the device set infrastructure")) and
is our defacto serialization for various operations and ioctls. It
still seems to be the case though that sets of vfio-pci devices really
only need serialization relative to hot resets affecting the entire
set, which is not relevant to SR-IOV VFs. As described in the Closes
link below, this serialization contributes to startup latency when
multiple VFs sharing the same "bus" are opened concurrently.
Mark the device itself as the basis of the dev_set for SR-IOV VFs.
Reported-by: Aaron Lewis <aaronlewis@google.com>
Closes: https://lore.kernel.org/all/20250626180424.632628-1-aaronlewis@google.com
Tested-by: Aaron Lewis <aaronlewis@google.com>
Fixes: e309df5b0c ("vfio/pci: Parallelize device open and release")
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20250626225623.1180952-1-alex.williamson@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fe24d5bc635e103a517ec201c3cb571eeab8be2f ]
When CONFIG_IOMMUFD is enabled and a device is bound to the pds_vfio_pci
driver, the following WARN_ON() trace is seen and probe fails:
WARNING: CPU: 0 PID: 5040 at drivers/vfio/vfio_main.c:317 __vfio_register_dev+0x130/0x140 [vfio]
<...>
pds_vfio_pci 0000:08:00.1: probe with driver pds_vfio_pci failed with error -22
This is because the driver's vfio_device_ops.detach_ioas isn't set.
Fix this by using the generic vfio_iommufd_physical_detach_ioas
function.
Fixes: 38fe3975b4 ("vfio/pds: Initial support for pds VFIO driver")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20250702163744.69767-1-brett.creeley@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 982ddd59ed97dc7e63efd97ed50273ffb817bd41 ]
When vfio_df_close() is called with open_count=0, it triggers a warning in
vfio_assert_device_open() but still decrements open_count to -1. This allows
a subsequent open to incorrectly pass the open_count == 0 check, leading to
unintended behavior, such as setting df->access_granted = true.
For example, running an IOMMUFD compat no-IOMMU device with VFIO tests
(https://github.com/awilliam/tests/blob/master/vfio-noiommu-pci-device-open.c)
results in a warning and a failed VFIO_GROUP_GET_DEVICE_FD ioctl on the first
run, but the second run succeeds incorrectly.
Add checks to avoid decrementing open_count below zero.
Fixes: 05f37e1c03 ("vfio: Pass struct vfio_device_file * to vfio_device_open/close()")
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jacob Pan <jacob.pan@linux.microsoft.com>
Link: https://lore.kernel.org/r/20250618234618.1910456-2-jacob.pan@linux.microsoft.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b25e271b377999191b12f0afbe1861edcf57e3fe ]
For devices with no-iommu enabled in IOMMUFD VFIO compat mode, the group open
path skips vfio_df_open(), leaving open_count at 0. This causes a warning in
vfio_assert_device_open(device) when vfio_df_close() is called during group
close.
The correct behavior is to skip only the IOMMUFD bind in the device open path
for no-iommu devices. Commit 6086efe734 omitted vfio_df_open(), which was
too broad. This patch restores the previous behavior, ensuring
the vfio_df_open is called in the group open path.
Fixes: 6086efe734 ("vfio-iommufd: Move noiommu compat validation out of vfio_iommufd_bind()")
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jacob Pan <jacob.pan@linux.microsoft.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20250618234618.1910456-1-jacob.pan@linux.microsoft.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1005a3ca28e90c7a64fa43023f866b960a60f791 ]
w/ "mode=lfs" mount option, generic/299 will cause system panic as below:
------------[ cut here ]------------
kernel BUG at fs/f2fs/segment.c:2835!
Call Trace:
<TASK>
f2fs_allocate_data_block+0x6f4/0xc50
f2fs_map_blocks+0x970/0x1550
f2fs_iomap_begin+0xb2/0x1e0
iomap_iter+0x1d6/0x430
__iomap_dio_rw+0x208/0x9a0
f2fs_file_write_iter+0x6b3/0xfa0
aio_write+0x15d/0x2e0
io_submit_one+0x55e/0xab0
__x64_sys_io_submit+0xa5/0x230
do_syscall_64+0x84/0x2f0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0010:new_curseg+0x70f/0x720
The root cause of we run out-of-space is: in f2fs_map_blocks(), f2fs may
trigger foreground gc only if it allocates any physical block, it will be
a little bit later when there is multiple threads writing data w/
aio/dio/bufio method in parallel, since we always use OPU in lfs mode, so
f2fs_map_blocks() does block allocations aggressively.
In order to fix this issue, let's give a chance to trigger foreground
gc in prior to block allocation in f2fs_map_blocks().
Fixes: 36abef4e79 ("f2fs: introduce mode=lfs mount option")
Cc: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e194e140ab7de2ce2782e64b9e086a43ca6ff4f2 ]
In lfs mode, dirty data needs OPU, we'd better calculate lower_p and
upper_p w/ them during has_not_enough_free_secs(), otherwise we may
encounter out-of-space issue due to we missed to reclaim enough
free section w/ foreground gc.
Fixes: 36abef4e79 ("f2fs: introduce mode=lfs mount option")
Cc: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5661998536af52848cc4d52a377e90368196edea ]
- touch /mnt/f2fs/012345678901234567890123456789012345678901234567890123
- truncate -s $((1024*1024*1024)) \
/mnt/f2fs/012345678901234567890123456789012345678901234567890123
- touch /mnt/f2fs/file
- truncate -s $((1024*1024*1024)) /mnt/f2fs/file
- mkfs.f2fs /mnt/f2fs/012345678901234567890123456789012345678901234567890123 \
-c /mnt/f2fs/file
- mount /mnt/f2fs/012345678901234567890123456789012345678901234567890123 \
/mnt/f2fs/loop
[16937.192225] F2FS-fs (loop0): Mount Device [ 0]: /mnt/f2fs/012345678901234567890123456789012345678901234567890123\xff\x01, 511, 0 - 3ffff
[16937.192268] F2FS-fs (loop0): Failed to find devices
If device path length equals to MAX_PATH_LEN, sbi->devs.path[] may
not end up w/ null character due to path array is fully filled, So
accidently, fields locate after path[] may be treated as part of
device path, result in parsing wrong device path.
struct f2fs_dev_info {
...
char path[MAX_PATH_LEN];
...
};
Let's add one byte space for sbi->devs.path[] to store null
character of device path string.
Fixes: 3c62be17d4 ("f2fs: support multiple devices")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 81b6ecca2f15922e8d653dc037df5871e754be6e ]
We should use "{usr,grp,prj}jquota=" to disable journaled quota,
rather than using off{usr,grp,prj}jquota.
Fixes: 4b2414d04e ("f2fs: support journalled quota")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 154467f4ad033473e5c903a03e7b9bca7df9a0fa ]
KMSAN reported a use of uninitialized value in `__is_extent_mergeable()`
and `__is_back_mergeable()` via the read extent tree path.
The root cause is that `get_read_extent_info()` only initializes three
fields (`fofs`, `blk`, `len`) of `struct extent_info`, leaving the
remaining fields uninitialized. This leads to undefined behavior
when those fields are accessed later, especially during
extent merging.
Fix it by zero-initializing the `extent_info` struct before population.
Reported-by: syzbot+b8c1d60e95df65e827d4@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=b8c1d60e95df65e827d4
Fixes: 94afd6d6e5 ("f2fs: extent cache: support unaligned extent")
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Abinash Singh <abinashsinghlalotra@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b574acb3cf7591d2513a9f29f8c2021ad55fb881 ]
When rv3028_clkout_round_rate() is called with a requested rate higher
than the highest supported rate, it currently returns 0, which disables
the clock. According to the clk API, round_rate() should instead return
the highest supported rate. Update the function to return the maximum
supported rate in this case.
Fixes: f583c341a5 ("rtc: rv3028: add clkout support")
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-rtc-clk-round-rate-v1-6-33140bb2278e@redhat.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 906726a5efeefe0ef0103ccff5312a09080c04ae ]
When pcf8563_clkout_round_rate() is called with a requested rate higher
than the highest supported rate, it currently returns 0, which disables
the clock. According to the clk API, round_rate() should instead return
the highest supported rate. Update the function to return the maximum
supported rate in this case.
Fixes: a39a6405d5 ("rtc: pcf8563: add CLKOUT to common clock framework")
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-rtc-clk-round-rate-v1-5-33140bb2278e@redhat.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 186ae1869880e58bb3f142d222abdb35ecb4df0f ]
When pcf85063_clkout_round_rate() is called with a requested rate higher
than the highest supported rate, it currently returns 0, which disables
the clock. According to the clk API, round_rate() should instead return
the highest supported rate. Update the function to return the maximum
supported rate in this case.
Fixes: 8c229ab604 ("rtc: pcf85063: Add pcf85063 clkout control to common clock framework")
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-rtc-clk-round-rate-v1-4-33140bb2278e@redhat.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 437c59e4b222cd697b4cf95995d933e7d583c5f1 ]
When nct3018y_clkout_round_rate() is called with a requested rate higher
than the highest supported rate, it currently returns 0, which disables
the clock. According to the clk API, round_rate() should instead return
the highest supported rate. Update the function to return the maximum
supported rate in this case.
Fixes: 5adbaed16c ("rtc: Add NCT3018Y real time clock driver")
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-rtc-clk-round-rate-v1-3-33140bb2278e@redhat.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d0a518eb0a692a2ab8357e844970660c5ea37720 ]
When hym8563_clkout_round_rate() is called with a requested rate higher
than the highest supported rate, it currently returns 0, which disables
the clock. According to the clk API, round_rate() should instead return
the highest supported rate. Update the function to return the maximum
supported rate in this case.
Fixes: dcaf038493 ("rtc: add hym8563 rtc-driver")
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-rtc-clk-round-rate-v1-2-33140bb2278e@redhat.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cf6eb547a24af7ad7bbd2abe9c5327f956bbeae8 ]
When ds3231_clk_sqw_round_rate() is called with a requested rate higher
than the highest supported rate, it currently returns 0, which disables
the clock. According to the clk API, round_rate() should instead return
the highest supported rate. Update the function to return the maximum
supported rate in this case.
Fixes: 6c6ff145b3 ("rtc: ds1307: add clock provider support for DS3231")
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-rtc-clk-round-rate-v1-1-33140bb2278e@redhat.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f8cd9193b62e92ad25def5370ca8ea2bc7585381 ]
The type of u argument of atomic_long_inc_below() should be long to avoid
unwanted truncation to int.
The patch fixes the wrong argument type of an internal function to
prevent unwanted argument truncation. It fixes an internal locking
primitive; it should not have any direct effect on userspace.
Mark said
: AFAICT there's no problem in practice because atomic_long_inc_below()
: is only used by inc_ucount(), and it looks like the value is
: constrained between 0 and INT_MAX.
:
: In inc_ucount() the limit value is taken from
: user_namespace::ucount_max[], and AFAICT that's only written by
: sysctls, to the table setup by setup_userns_sysctls(), where
: UCOUNT_ENTRY() limits the value between 0 and INT_MAX.
:
: This is certainly a cleanup, but there might be no functional issue in
: practice as above.
Link: https://lkml.kernel.org/r/20250721174610.28361-1-ubizjak@gmail.com
Fixes: f9c82a4ea8 ("Increase size of ucounts to atomic_long_t")
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Alexey Gladkov <legion@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: MengEn Sun <mengensun@tencent.com>
Cc: "Thomas Weißschuh" <linux@weissschuh.net>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bdc877ba6b7ff1b6d2ebeff11e63da4a50a54854 ]
The moduleparam code allows modules to provide their own definition of
MODULE_PARAM_PREFIX, instead of using the default KBUILD_MODNAME ".".
Commit 730b69d225 ("module: check kernel param length at compile time,
not runtime") added a check to ensure the prefix doesn't exceed
MODULE_NAME_LEN, as this is what param_sysfs_builtin() expects.
Later, commit 58f86cc89c ("VERIFY_OCTAL_PERMISSIONS: stricter checking
for sysfs perms.") removed this check, but there is no indication this was
intentional.
Since the check is still useful for param_sysfs_builtin() to function
properly, reintroduce it in __module_param_call(), but in a modernized form
using static_assert().
While here, clean up the __module_param_call() comments. In particular,
remove the comment "Default value instead of permissions?", which comes
from commit 9774a1f54f ("[PATCH] Compile-time check re world-writeable
module params"). This comment was related to the test variable
__param_perm_check_##name, which was removed in the previously mentioned
commit 58f86cc89c.
Fixes: 58f86cc89c ("VERIFY_OCTAL_PERMISSIONS: stricter checking for sysfs perms.")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Link: https://lore.kernel.org/r/20250630143535.267745-4-petr.pavlu@suse.com
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a88db916b8c77552f49f7d9f8744095ea01a268f ]
Conflicting attachment resolution is based on the number of states
traversed to reach an accepting state in the attachment DFA, accounting
for DFA loops traversed during the matching process. However, the loop
counting logic had multiple bugs:
- The inc_wb_pos macro increments both position and length, but length
is supposed to saturate upon hitting buffer capacity, instead of
wrapping around.
- If no revisited state is found when traversing the history, is_loop
would still return true, as if there was a loop found the length of
the history buffer, instead of returning false and signalling that
no loop was found. As a result, the adjustment step of
aa_dfa_leftmatch would sometimes produce negative counts with loop-
free DFAs that traversed enough states.
- The iteration in the is_loop for loop is supposed to stop before
i = wb->len, so the conditional should be < instead of <=.
This patch fixes the above bugs as well as the following nits:
- The count and size fields in struct match_workbuf were not used,
so they can be removed.
- The history buffer in match_workbuf semantically stores aa_state_t
and not unsigned ints, even if aa_state_t is currently unsigned int.
- The local variables in is_loop are counters, and thus should be
unsigned ints instead of aa_state_t's.
Fixes: 21f6066105 ("apparmor: improve overlapping domain attachment resolution")
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
Co-developed-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6c055e62560b958354625604293652753d82bcae ]
WB_HISTORY_SIZE was defined to be a value not a power of 2, despite a
comment in the declaration of struct match_workbuf stating it is and a
modular arithmetic usage in the inc_wb_pos macro assuming that it is. Bump
WB_HISTORY_SIZE's value up to 32 and add a BUILD_BUG_ON_NOT_POWER_OF_2
line to ensure that any future changes to the value of WB_HISTORY_SIZE
respect this requirement.
Fixes: 136db99485 ("apparmor: increase left match history buffer size")
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 69cd720a8a5e9ef0f05ce5dd8c9ea6e018245c82 ]
As part of the normal initiator side scanning the guest's scsi layer
will loop over all possible targets and send an inquiry. Since the
max number of targets for virtio-scsi is 256, this can result in 255
error messages about targets not existing if you only have a single
target. When there's more than 1 vhost-scsi device each with a single
target, then you get N * 255 log messages.
It looks like the log message was added by accident in:
commit 3f8ca2e115 ("vhost/scsi: Extract common handling code from
control queue handler")
when we added common helpers. Then in:
commit 09d7583294 ("vhost/scsi: Use common handling code in request
queue handler")
we converted the scsi command processing path to use the new
helpers so we started to see the extra log messages during scanning.
The patches were just making some code common but added the vq_err
call and I'm guessing the patch author forgot to enable the vq_err
call (vq_err is implemented by pr_debug which defaults to off). So
this patch removes the call since it's expected to hit this path
during device discovery.
Fixes: 09d7583294 ("vhost/scsi: Use common handling code in request queue handler")
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20250611210113.10912-1-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3b36f86dc47261828f96f826077131a35dd825fd ]
The DMA map functions can fail and should be tested for errors.
Fixes: 058e0e847d ("mtd: rawnand: rockchip: NFC driver for RK3308, RK2928 and others")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 856db37592021e9155384094e331e2d4589f28b1 ]
In dbAllocCtl(), read_metapage() increases the reference count of the
metapage. However, when dp->tree.budmin < 0, the function returns -EIO
without calling release_metapage() to decrease the reference count,
leading to a memory leak.
Add release_metapage(mp) before the error return to properly manage
the metapage reference count and prevent the leak.
Fixes: a5f5e4698f8abbb25fe4959814093fb5bfa1aa9d ("jfs: fix shift-out-of-bounds in dbSplit")
Signed-off-by: Zheng Yu <zheng.yu@northwestern.edu>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit da11e6a30e0bb8e911288bdc443b3dc8f6a7cac7 ]
fb_add_videomode() can fail with -ENOMEM when its internal kmalloc() cannot
allocate a struct fb_modelist. If that happens, the modelist stays empty but
the driver continues to register. Add a check for its return value to prevent
poteintial null-ptr-deref, which is similar to the commit 17186f1f90d3 ("fbdev:
Fix do_register_framebuffer to prevent null-ptr-deref in fb_videomode_to_var").
Fixes: 1b6c79361b ("video: imxfb: Add DT support")
Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6908c5f4f066a0412c3d9a6f543a09fa7d87824b ]
The `adf_ring_next()` function in the QAT debug transport interface
fails to correctly update the position index when reaching the end of
the ring elements. This triggers the following kernel warning when
reading ring files, such as
/sys/kernel/debug/qat_c6xx_<D:B:D:F>/transport/bank_00/ring_00:
[27725.022965] seq_file: buggy .next function adf_ring_next [intel_qat] did not update position index
Ensure that the `*pos` index is incremented before returning NULL when
after the last element in the ring is found, satisfying the seq_file API
requirements and preventing the warning.
Fixes: a672a9dc87 ("crypto: qat - Intel(R) QAT transport code")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d41d75fe1b751ee6b347bf1cb1cfe9accc4fcb12 ]
QAT devices perform an additional integrity check during compression by
decompressing the output. Starting from QAT GEN4, this verification is
done in-line by the hardware. However, on GEN2 devices, the hardware
reads back the compressed output from the destination buffer and performs
a decompression operation using it as the source.
In the current QAT driver, destination buffers are always marked as
write-only. This is incorrect for QAT GEN2 compression, where the buffer
is also read during verification. Since commit 6f5dc7658094
("iommu/vt-d: Restore WO permissions on second-level paging entries"),
merged in v6.16-rc1, write-only permissions are strictly enforced, leading
to DMAR errors when using QAT GEN2 devices for compression, if VT-d is
enabled.
Mark the destination buffers as DMA_BIDIRECTIONAL. This ensures
compatibility with GEN2 devices, even though it is not required for
QAT GEN4 and later.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Fixes: cf5bb835b7 ("crypto: qat - fix DMA transfer direction")
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c32969d0362a790fbc6117e0b6a737a7e510b843 ]
arch/sh/Makefile defines and exports ld-bfd to be used by
arch/sh/boot/compressed/Makefile and arch/sh/boot/romimage/Makefile.
However some shells, including dash, will not pass through environment
variables whose name includes a hyphen. Usually GNU make does not use
a shell to recurse, but if e.g. $(srctree) contains '~' it will use a
shell here.
Other instances of this problem were previously fixed by commits
2bfbe7881e "kbuild: Do not use hyphen in exported variable name"
and 82977af93a "sh: rename suffix-y to suffix_y".
Rename the variable to ld_bfd.
References: https://buildd.debian.org/status/fetch.php?pkg=linux&arch=sh4&ver=4.13%7Erc5-1%7Eexp1&stamp=1502943967&raw=0
Fixes: 7b022d07a0 ("sh: Tidy up the ldscript output format specifier.")
Signed-off-by: Ben Hutchings <benh@debian.org>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca592e20659e0304ebd8f4dabb273da4f9385848 ]
There is no PHY for the XCVR module on i.MX93, the channel status needs
to be obtained from FSL_XCVR_RX_CS_DATA_* registers. And channel status
acknowledge (CSA) bit should be set once channel status is processed.
Fixes: e240b9329a ("ASoC: fsl_xcvr: Add support for i.MX93 platform")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20250710030405.3370671-2-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2138e89cb066b40386b1d9ddd61253347d356474 ]
The do_k_string() and do_c_string() functions do essentially the same
thing which is they add a string and a comma onto the end of an existing
string. At the end, the caller will overwrite the last comma with a
newline. Later, in orangefs_kernel_debug_init(), we add a newline to
the string.
The change to do_k_string() is just cosmetic. I moved the "- 1" to
the other side of the comparison and made it "+ 1". This has no
effect on runtime, I just wanted the functions to match each other
and the rest of the file.
However in do_c_string(), I removed the "- 2" which allows us to print
two extra characters. I noticed this issue while reviewing the code
and I doubt affects anything in real life. My guess is that this was
double counting the comma and the newline. The "+ 1" accounts for
the newline, and the caller will delete the final comma which ensures
there is enough space for the newline.
Removing the "- 2" lets us print 2 more characters, but mainly it makes
the code more consistent and understandable for reviewers.
Fixes: 44f4641073 ("orangefs: clean up debugfs globals")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 61ae7f8694fb4b57a8c02a1a8d2b601806afc999 ]
__iomem attribute is supposed to be used only with variables holding the
MMIO pointer. But here, 'mw_addr' variable is just holding a 'void *'
returned by pci_epf_alloc_space(). So annotating it with __iomem is clearly
wrong. Hence, drop the attribute.
This also fixes the below sparse warning:
drivers/pci/endpoint/functions/pci-epf-vntb.c:524:17: warning: incorrect type in assignment (different address spaces)
drivers/pci/endpoint/functions/pci-epf-vntb.c:524:17: expected void [noderef] __iomem *mw_addr
drivers/pci/endpoint/functions/pci-epf-vntb.c:524:17: got void *
drivers/pci/endpoint/functions/pci-epf-vntb.c:530:21: warning: incorrect type in assignment (different address spaces)
drivers/pci/endpoint/functions/pci-epf-vntb.c:530:21: expected unsigned int [usertype] *epf_db
drivers/pci/endpoint/functions/pci-epf-vntb.c:530:21: got void [noderef] __iomem *mw_addr
drivers/pci/endpoint/functions/pci-epf-vntb.c:542:38: warning: incorrect type in argument 2 (different address spaces)
drivers/pci/endpoint/functions/pci-epf-vntb.c:542:38: expected void *addr
drivers/pci/endpoint/functions/pci-epf-vntb.c:542:38: got void [noderef] __iomem *mw_addr
Fixes: e35f56bb03 ("PCI: endpoint: Support NTB transfer between RC and EP")
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250709125022.22524-1-mani@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 34b283636181ce02c52633551f594fec9876bec7 ]
The dma_unmap_sg() functions should be called with the same nents as the
dma_map_sg(), not the value the map function returned.
Fixes: d358f1abbf ("crypto: img-hash - Add Imagination Technologies hw hash accelerator")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 01951a7dc5ac1a37e5fb7d86ea7eb2dfbf96e8b6 ]
The dma_unmap_sg() functions should be called with the same nents as the
dma_map_sg(), not the value the map function returned.
Fixes: 472b04444c ("crypto: keembay - Add Keem Bay OCS HCU driver")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8ab346f9907a1a3aa2f0e5decf849925c06ae2e ]
The de clock is marked with CLK_SET_RATE_PARENT, which is really not
necessary (as confirmed from experimentation) and significantly
restricts flexibility for other clocks using the same parent.
In addition the source selection (parent) field is marked as using
2 bits, when it the documentation reports that it uses 3.
Fix both issues in the de clock definition.
Fixes: d0f11d14b0 ("clk: sunxi-ng: add support for V3s CCU")
Signed-off-by: Paul Kocialkowski <paulk@sys-base.io>
Link: https://patch.msgid.link/20250704154008.3463257-1-paulk@sys-base.io
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
