Allocations from the ion heap need to be zeroed to protect userspace
from seeing memory belonging to other processes. First allocations
from this heap were not zero'd allowing users to see memory from other
processes on a warm reset.
Change-Id: I524a7b79cb76c390c870fcf8b30d213185fc85a0
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
Some of the printks are in the packet handling path.
We now ratelimit the very unlikely errors to avoid
kmsg spamming.
Signed-off-by: JP Abgrall <jpa@google.com>
Time to wait should be based on the intended target speed, not the
actual speed (which may be held high by another CPU).
Change-Id: Ifc5bb55d06adddb9a02af90af05398a78f282272
Reported-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Allows a defconfig to set a default dtb to concatenate with a zImage
to create a zImage-dtb.<dtb name>
Signed-off-by: Erik Gilling <konkers@android.com>
Change-Id: I34b643b1c49228fbae88a56e46c93c478089620d
Previously the idle time returned from get_cpu_idle_time_us included the
iowait time. So the iowait time was always calculated as idle time.
But now the idle time returned from get_cpu_idle_time_us does not include
the iowait time anymore because of below commit which cause the iowait time
always calculated as busy time:
6beea0c nohz: Fix update_ts_time_stat idle accounting
Add the io_is_busy interface, as does the ondemand governor, and let the user
configure the iowait time as busy or idle through the io_is_busy sysfs
interface.
By default, io_is_busy is disabled.
[toddpoynor@google.com: minor updates]
Change-Id: If7d70ff864c43bc9c8d7fd7cfc66f930d339f9b4
Signed-off-by: Lianwei Wang <lian-wei.wang@motorola.com>
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Accept a string of delays and speeds at which to apply the delay before
raising each step above hispeed. For example, "80000 1300000:200000
1500000:40000" means that the delay at or above 1GHz, until 1.3GHz is 80 msecs,
the delay until 1.5GHz is 200 msecs and the delay at or above 1.5GHz is 40
msecs when hispeed_freq is 1GHz.
[toddpoynor@google.com: add documentation]
Change-Id: Ifeebede8b1acbdd0a53e5c6916bccbf764dc854f
Signed-off-by: Minsung Kim <ms925.kim@samsung.com>
Add the 'funcgraph-flat' option to the function_graph tracer to use the default
trace printing format rather than the hierarchical formatting normally used.
Change-Id: If2900bfb86e6f8f51379f56da4f6fabafa630909
Signed-off-by: Jamie Gennis <jgennis@google.com>
Add the ability for a heap to free buffers asynchrounously. Freed buffers
are placed on a free list and freed from a low priority background thread.
If allocations from a particular heap fail, the free list is drained. This
patch also enable asynchronous frees from the chunk heap.
Change-Id: Idfdbc8608b6cbd9e27d2e31ea4fd84fea9f69f7d
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
The tgids are tracked along side the saved_cmdlines tracking, and can be
included in trace output by enabling the 'print-tgid' trace option. This is
useful when doing post-processing of the trace data, as it allows events to be
grouped by tgid.
Change-Id: I52ed04c3a8ca7fddbb868b792ce5d21ceb76250e
Signed-off-by: Jamie Gennis <jgennis@google.com>
Add security hooks to the binder and implement the hooks for SELinux.
The security hooks enable security modules such as SELinux to implement
controls over binder IPC. The security hooks include support for
controlling what process can become the binder context manager
(binder_set_context_mgr), controlling the ability of a process
to invoke a binder transaction/IPC to another process (binder_transaction),
controlling the ability a process to transfer a binder reference to
another process (binder_transfer_binder), and controlling the ability
of a process to transfer an open file to another process (binder_transfer_file).
This support is used by SE Android, http://selinuxproject.org/page/SEAndroid.
Change-Id: I9a64a87825df2e60b9c51400377af4a9cd1c4049
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Currently ion can only share buffers with dma buf fd's. Fd's can not be
used inside the kernel as they are process specific so support for
sharing buffers with dma buf kernel handles is needed to support kernel
only use cases. An example use case could be a GPU driver using ion
that wants to share its output buffers with a 3d party display
controller driver supporting dma buf.
Change-Id: If1b3753ddbd5b44c5a3e622055d5473e16fc1c48
Signed-off-by: Johan Mossberg <johan.mossberg@stericsson.com>
Removed bluetooth checks for AID_NET_BT and AID_NET_BT_ADMIN
which are not useful anymore.
This is in preparation for getting rid of all the AID_* gids.
Signed-off-by: JP Abgrall <jpa@google.com>
Ensure userspace reads an up-to-date value for charging status whenever the
charge source is updated. Avoid races where stale charging state may be
reflected in userspace until the next battery state poll.
Change-Id: Ia744db48584e9e9abf442710c279af9e3a25c079
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Should no longer need to fix up AC/USB online state via these.
Change-Id: I48d2ef0fbefee58cb47eafc11d9a44759920df7a
Signed-off-by: Todd Poynor <toddpoynor@google.com>
In the past it would always ignore interfaces with loopback addresses.
Now we just treat them like any other.
This also helps with writing tests that check for the presence
of the qtaguid module.
Signed-off-by: JP Abgrall <jpa@google.com>
In the past the iface_stat_fmt would only show global bytes/packets
for the skb-based numbers.
For stall detection in userspace, distinguishing tcp vs other protocols
makes it easier.
Now we report
ifname total_skb_rx_bytes total_skb_rx_packets total_skb_tx_bytes
total_skb_tx_packets {rx,tx}_{tcp,udp,ohter}_{bytes,packets}
Bug: 6818637
Signed-off-by: JP Abgrall <jpa@google.com>
Refactor the code in the system heap used to map and zero the buffers
into a seperate utility so it can be called from other heaps. Use it from
the chunk heap.
Change-Id: I706341ae42b80bc4aae8a8614b4f73435bbf05d9
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
There is race condition when both two cpu do CPUFREQ_GOV_STOP and one cpu
do CPUFREQ_GOV_START soon. The sysfs_remove_group is not done yet on one
cpu, but sysfs_create_group is called on another cpu, which cause governor
start failed and then kernel panic in timer callback because the policy and
cpu mask are all kfree in cpufreq driver.
Replace atomic with mutex to lock the whole START/STOP sequence.
Change-Id: I3762b3d44315ae021b8275aca84f5ea9147cc540
Signed-off-by: Lianwei Wang <a22439@motorola.com>
qtaguid limits what can be done with /ctrl and /stats based on group
membership.
This changes removes AID_NET_BW_STATS and AID_NET_BW_ACCT, and picks
up the groups from the gid of the matching proc entry files.
Signed-off-by: JP Abgrall <jpa@google.com>
Change-Id: I42e477adde78a12ed5eb58fbc0b277cdaadb6f94
vmap/vunmap spend a significant amount of time allocating the
address space to map into. Rather than allocating address space
for each page, instead allocate once for the entire allocation
and then just map and unmap each page into that address space.
Change-Id: I4a5c850717c80f75506a36b7ec2bcd55857b8dea
Signed-off-by: Rebecca Schultz Zavin <rschultz@google.com>
Need to use irqsave/restore spinlock calls to avoid a deadlock in calls
from the timer.
Change-Id: I15b6b590045ba1447e34ca7b5ff342723e53a605
Signed-off-by: Todd Poynor <toddpoynor@google.com>
If multiple governors are in use then avoid processing frequency transition
notifications for CPUs on which the interactive governor is not enabled.
Change-Id: Ibd75255b921d887501a64774a8c4f62302f2d4e4
Reported-by: Francisco Franco <francisco.franco@cloudcar.com>
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Update default go_hispeed_load from 85% to 99%. Recent changes to the
governor now use a default target_load of 90%. go_hispeed_load should
not be lower than the target load for hispeed_freq, which could lead
to oscillating speed decisions. Other recent changes reduce the need
to dampen speed jumps on load spikes, while input event boosts from
userspace are the preferred method for anticipating load spikes with
UI impacts.
General update to the documentation to reflect recent changes.
Change-Id: I1b92f3091f42c04b10503cd1169a943b5dfd6faf
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Starting the governor, or restarting on a hotplugged-in CPU, can race
with the timer start in idle, triggering a BUG on timer already pending.
Start the timer before setting the enable flag, and use enable_sem to
protect the sequence (and ensure correct order of the update to the
enable flag). Delete any existing timer for safety.
Change-Id: Ife77cf9fe099e8fd8543224cbf148c6722c2ffb0
Reported-by: Francisco Franco <francisco.franco@cloudcar.com>
Signed-off-by: Todd Poynor <toddpoynor@google.com>
When stopping the governor, del_timer_sync() can race against an
invocation of the idle notifier callback, which has the potential
to reactivate the timer.
To fix this issue, a read-write semaphore is used. Multiple readers are
allowed as long as pcpu->governor_enabled is true. However it can be
moved to false only after taking a write semaphore which would wait for
any on-going asynchronous activities to complete and prevent any more of
those activities to be initiated.
[toddpoynor@google.com: cosmetic and commit text changes]
Change-Id: Ib51165a735d73dcf964a06754c48bdc1913e13d0
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
35a84de cpufreq: interactive: apply above_hispeed_delay to each step above hispeed
caused the speed choice logic to osciallate between boosting and not boosting.
Add back code to ensure speed does not drop below boost frequency while
boosting.
Change-Id: Id420068480fcc7f5c4989ff523e2a8d22e2f4db2
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Always use deferrable timer for load sampling.
Set a non-deferrable timer to an additional slack time to allow prior to
waking up from idle to drop speed when not at minimum speed. Slack value
-1 avoids wakeups to drop speed. Default is 80ms.
Remove the governidle module param and its timer management in idle. For
platforms on which holding speed above mimum in idle costs power, use the
new timer slack to select how long to wait before waking up to drop speed.
Change-Id: I270b3980667e2c70a68e5bff534124b4411dbad5
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Emulate NMIs on systems where they are not available by using timer
interrupts on other cpus. Each cpu will use its softlockup hrtimer
to check that the next cpu is processing hrtimer interrupts by
verifying that a counter is increasing.
This patch is useful on systems where the hardlockup detector is not
available due to a lack of NMIs, for example most ARM SoCs.
Without this patch any cpu stuck with interrupts disabled can
cause a hardware watchdog reset with no debugging information,
but with this patch the kernel can detect the lockup and panic,
which can result in useful debugging info.
Signed-off-by: Colin Cross <ccross@android.com>
Sysfs attribute boostpulse_duration specifies the duration of boosting CPU
speed in response to bootpulse events. Duration is specified in usecs,
default 80ms.
Change-Id: Ifd41625574891a44f1787a4e85d1e7b4f2afb52b
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Add notifier for speed transitions. Keep a count of CPU active
microseconds times current frequency, converted to a percentage relative
to the current frequency when load is evaluated.
Change-Id: I5c27adb11081c50490219784ca57cc46e97fc28c
Signed-off-by: Todd Poynor <toddpoynor@google.com>
The heapmask in the client generally wasn't being used. This
patch removes it.
Change-Id: I3526723fbf8f2e81c28c0733deb583ea14bdd837
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
There is some confusion between when to use the heap type and when
the id. This patch clarifies this by using clearer variable names
and describing the intention in the comments. Also fixes the client
debug code to print heaps by id instead of type.
Change-Id: Ie8b3dadded52e18590fcb2ca94001f6ed46ef07d
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
This patch adds support for a chunk heap that allows for buffers that are
made up of a list of fixed size chunks taken from a carveout. Chunk sizes
are configured when the heaps are created by passing the chunk size in the
priv field of the heap platform data.
Change-Id: Ia9e003f727b553a92804264debe119dcf78b14e0
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
The system heap contained several general purpose functions to map
buffers to the kernel and userspace. This patch refactors those
into ion_heap.c so they can be used by other heaps.
Change-Id: If64591798bdc2c248bf9064ace2c927909d7adb8
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
Switches the rbtree tree of heaps for a plist. This significantly
simplifies the code and the list is small and is modified only at
first boot so the rbtree is unnecessary. This also switches
the traversal of the heap list to traverse from highest to lowest
id's. This allows allocations to pass a heap mask that falls
back on the system heap -- typically id 0, which is the common case.
Change-Id: I715be6f4cf020a84ca4f1947c30ee3d2559fb523
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
This patch allows you to specify a heap that requires carveout memory
but that doesn't specify a start address. Memblock_alloc will be called
to find a location for these heaps.
Change-Id: I9c79b30e3105e796060fc74b058f04093ee5e96e
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
The longer-term load since last speed change isn't terribly useful,
may delay recognition of dropping load, and would need forthcoming
changes to adjust load for changing CPU speeds. Drop it.
Change-Id: Ic3cbb0542cc3484617031787e03ed9bdd632dec1
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Accept a string of target loads and speeds at which to apply the
target loads, per the documentation update in this patch. For example,
"85 1000000:90 1700000:99" targets CPU load 85% below speed 1GHz, 90%
at or above 1GHz, until 1.7GHz and above, at which load 99% is targeted.
Attempt to avoid oscillations by evaluating the current speed
weighted by current load against each new choice of speed, choosing a
higher speed if the current load requires a higher speed.
Change-Id: Ie3300206047c84eca5a26b0b63ea512e5207550e
Signed-off-by: Todd Poynor <toddpoynor@google.com>
use atomic_read to get the refcount value to avoid compilation warning
Change-Id: I9bf0a07c787af8f87ac19314f996a78142f72f6b
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
when using carveout heap ion_buffer_create function failed because
map_dma and unmap_dma operations aren't set by carveout heap.
Change-Id: I817bfad742abfab10b01d9b3d2e18bdf812a1307
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Pages are zeroed for security purposes when returned to the
ion heap. There was a bug in this code preventing this
from happening.
Bug: 7573871
Change-Id: I79c22ee1da98f306199f3a192eaec4e81d5fd059
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
Apply above_hispeed_delay whenever increasing speed to a new speed above
hispeed (not just the first step above hispeed).
Change-Id: Ibb7add7db47f2a4306a9458c4e1ebabb60698636
Signed-off-by: Todd Poynor <toddpoynor@google.com>
