Protonic WD3 is a proof of concept platform for tractor e-cockpit applications
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This adds support for the OMNIA Flex Concentrator product
from Kamstrup A/S. It's providing radio mesh communication
infrastructure for smart electricity meters.
Kamstrup OMNIA is a modular and scalable smart grid platform.
Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Update the calibration table to make the temperature more accurate.
Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The range of dcfg reg is wrong, which overlap with other device,
such as rcpm. This issue causing rcpm driver failed to claim
reg resource when calling devm_ioremap_resource().
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The data of property 'fsl,rcpm-wakeup' is not corrcet, which causing
RCPM driver incorrectly program register IPPDEXPCR1, then flextimer is
wrongly clock gated during system suspend, can't send interrupt to
wake.
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Kobo Aura has an eKTF2132 touchscreen controller.
Although the vendor kernel toggles a reset pin (GPIO5-12) during the
startup sequence, the touchscreen works without it.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Change i.MX SoCs nand node name from "flexcan" to "can" to be compliant with
yaml schema, it requires the nodename to be "can". This fixes the following
error found by dtbs_check:
arch/arm/boot/dts/imx6dl-apf6dev.dt.yaml: flexcan@2090000: $nodename:0: 'flexcan@2090000' does not match '^can(@.*)?$'
From schema: Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
There are four flavors of TechNexion PICO-IMX6 boards. They have their
own DTSes, even though in Dwarf, Nymph and Pi are exactly the same.
They also have their own bindings so adjust the compatibles to match the
bindings.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Altesco (Altus-Escon-Company BV) I6P is a part of the diagnostic system
for the vehicle inspection stations.
Co-developed-by: David Jander <david@protonic.nl>
Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Mark the STMPE resistive touch controller as a wakeup-source.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The PHYTEC PEB-AV-02 adapter adds the capability to connect a parallel
LCD display to the phyBOARD-Segin full featured, either with capacitive
or resistive touch.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add a PHYTEC phyBOARD-Segin full featured with phyCORE-i.MX 6UL with
eMMC and following features:
- i.MX 6UL
- 512 MB RAM
- eMMC
- USB Host/OTG
- 2x 100 Mbit/s Ethernet
- RS232
- CAN
Signed-off-by: Yunus Bas <y.bas@phytec.de>
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add usb alias for bootloader searching the controller in correct order.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
After this patch we need 2 arguments less for the fsl,stop-mode
property:
| commit d9b081e3fc
| Author: Marc Kleine-Budde <mkl@pengutronix.de>
| Date: Sun Jun 14 21:09:20 2020 +0200
|
| can: flexcan: remove ack_grp and ack_bit handling from driver
|
| Since commit:
|
| 048e3a34a2 can: flexcan: poll MCR_LPM_ACK instead of GPR ACK for stop mode acknowledgment
|
| the driver polls the IP core's internal bit MCR[LPM_ACK] as stop mode
| acknowledge and not the acknowledgment on chip level.
|
| This means the 4th and 5th value of the property "fsl,stop-mode" isn't used
| anymore. This patch removes the used "ack_gpr" and "ack_bit" from the driver.
This patch removes the two last arguments, as they are not needed
anymore.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The node names for devices using the pwm-leds driver follow a certain
naming scheme (now). Parent node name is not enforced, but recommended
by DT project.
DTC arch/arm/boot/dts/imx53-ppd.dt.yaml
CHECK arch/arm/boot/dts/imx53-ppd.dt.yaml
arch/arm/boot/dts/imx53-ppd.dt.yaml: leds-brightness: 'alarm-brightness' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/imx6dl-cubox-i.dt.yaml
CHECK arch/arm/boot/dts/imx6dl-cubox-i.dt.yaml
arch/arm/boot/dts/imx6dl-cubox-i.dt.yaml: pwmleds: 'front' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/imx6dl-cubox-i-emmc-som-v15.dt.yaml
CHECK arch/arm/boot/dts/imx6dl-cubox-i-emmc-som-v15.dt.yaml
arch/arm/boot/dts/imx6dl-cubox-i-emmc-som-v15.dt.yaml: pwmleds: 'front' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/imx6dl-cubox-i-som-v15.dt.yaml
CHECK arch/arm/boot/dts/imx6dl-cubox-i-som-v15.dt.yaml
arch/arm/boot/dts/imx6dl-cubox-i-som-v15.dt.yaml: pwmleds: 'front' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/leds/leds-pwm.yaml
DTC arch/arm/boot/dts/imx6sx-softing-vining-2000.dt.yaml
CHECK arch/arm/boot/dts/imx6sx-softing-vining-2000.dt.yaml
arch/arm/boot/dts/imx6sx-softing-vining-2000.dt.yaml: pwmleds: 'blue', 'green', 'red' do not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/leds/leds-pwm.yaml
Signed-off-by: Alexander Dahl <post@lespocky.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The WaRP7 board (Wearable Development Platform) was apparently made by
Element14, not by "Warp". Correct the vendor in compatible to reflect
this. The compatibles were not documented in the bindings before.
Link: https://www.element14.com/community/docs/DOC-79058
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The WaRP board (Wearable Development Platform) was apparently made by
Revolution Robotics, Inc (brand: Revotics), not by "Warp". Correct the
vendor in compatible to reflect this. The compatibles were not
documented in the bindings before.
Link: https://revotics.com/warp
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Aristainetos and Aristainetos2 boards have only SoC compatible.
Cc: Heiko Schocher <hs@denx.de>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
There are four flavors of TechNexion PICO-IMX6 boards. They have their
own DTSes, even though in Dwarf, Nymph and Pi are exactly the same.
They also have their own bindings so adjust the compatibles to match the
bindings.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The dtschema expects watchdog device node name to be "watchdog":
arch/arm/boot/dts/vf500-colibri-eval-v3.dt.yaml: wdog@4003e000:
$nodename:0: 'wdog@4003e000' does not match '^watchdog(@.*|-[0-9a-f])?$'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The dtschema expects watchdog device node name to be "watchdog":
arch/arm/boot/dts/imx31-bug.dt.yaml: wdog@53fdc000:
$nodename:0: 'wdog@53fdc000' does not match '^watchdog(@.*|-[0-9a-f])?$'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Defining the EEPROM pagesize can increase the write speed significantly.
Set it to the pagesize stated in the EEPROM's datasheet for
phyCORE-i.MX 6UL, phyCORE-i.MX 6 and phyFLEX-i.MX 6.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Set the correct EEPROM compatible for phyCORE-i.MX 6 and phyFLEX-i.MX 6,
as stated in the device tree bindings.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The touchscreen subnode name needs to be stmpe_touchscreen as mentioned
in the dt-bindings.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
USBOTG1 has a Micro-USB port that can be used in host mode (using an OTG
cable) or device mode.
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Together with the recently merged support for alias-based MMC host
numbering, this makes the MMC devices names match what the bootloader
expects.
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
These properties were never supported by the DP83867, and a patch
implementing them was rejected in favor of a different solution. Remove
them.
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This property was never set correctly; it should have been num-cs. As
num-cs support is being removed as well, simply drop it.
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Adding display timings directly on device tree files make it difficult
to maintain as a same copy of timings may exist on different files or
panel-simple driver.
We have a panel-simple driver for this particular usage so supporting
on this driver will help to use the same timings on any device tree
files if the board mounted on a similar vendor display.
Engicam C.TOUCH OF 10.1" LCD board uses Ampire 10.1" TFT LCD and
it has supported by panel-simple already, so simply use that binding.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
dtschema for GPIO controllers expects GPIO hogs to end with 'hog'
suffix.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
tid_addr is not a "pointer to (pointer to int in userspace)"; it is in
fact a "pointer to (pointer to int in userspace) in userspace". So
sparse rightfully complains about passing a kernel pointer to
put_user().
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 453431a549 ("mm, treewide: rename kzfree() to
kfree_sensitive()") renamed kzfree() to kfree_sensitive(),
but it left a compatibility definition of kzfree() to avoid
being too disruptive.
Since then a few more instances of kzfree() have slipped in.
Just get rid of them and remove the compatibility definition
once and for all.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull timer fixes from Thomas Gleixner:
"A time namespace fix and a matching selftest. The futex absolute
timeouts which are based on CLOCK_MONOTONIC require time namespace
corrected. This was missed in the original time namesapce support"
* tag 'timers-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests/timens: Add a test for futex()
futex: Adjust absolute futex timeouts with per time namespace offset
Pull scheduler fixes from Thomas Gleixner:
"Two scheduler fixes:
- A trivial build fix for sched_feat() to compile correctly with
CONFIG_JUMP_LABEL=n
- Replace a zero lenght array with a flexible array"
* tag 'sched-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/features: Fix !CONFIG_JUMP_LABEL case
sched: Replace zero-length array with flexible-array
Pull perf fix from Thomas Gleixner:
"A single fix to compute the field offset of the SNOOPX bit in the data
source bitmask of perf events correctly"
* tag 'perf-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: correct SNOOPX field offset
Pull locking fix from Thomas Gleixner:
"Just a trivial fix for kernel-doc warnings"
* tag 'locking-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/seqlocks: Fix kernel-doc warnings
Pull NTB fixes from Jon Mason.
* tag 'ntb-5.10' of git://github.com/jonmason/ntb:
NTB: Use struct_size() helper in devm_kzalloc()
ntb: intel: Fix memleak in intel_ntb_pci_probe
NTB: hw: amd: fix an issue about leak system resources
Pull i2c fix from Wolfram Sang:
"Regression fix for rc1 and stable kernels as well"
* 'i2c/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: core: Restore acpi_walk_dep_device_list() getting called after registering the ACPI i2c devs
