Merge "ARM: Interrupt cleanups and API change preparation" from Thomas
Gleixner:
The following patch series contains the following changes:
- Consolidation of chained interrupt handler setup/removal
- Switch to functions which avoid a redundant interrupt
descriptor lookup
- Preparation of interrupt flow handlers for the 'irq' argument
removal
* 'queue/irq/arm' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
ARM/orion/gpio: Prepare gpio_irq_handler for irq argument removal
ARM/pxa: Prepare balloon3_irq_handler for irq argument removal
ARM/pxa: Prepare *_irq_handler for irq argument removal
ARM/dove: Prepare pmu_irq_handler for irq argument removal
ARM/sa1111: Prepare sa1111_irq_handler for irq argument removal
ARM/locomo: Prepare locomo_handler for irq argument removal
ARM, irq: Use irq_desc_get_xxx() to avoid redundant lookup of irq_desc
ARM/LPC32xx: Use irq_set_handler_locked()
ARM/irq: Use access helper irq_data_get_affinity_mask()
ARM/locomo: Consolidate chained IRQ handler install/remove
ARM/orion: Consolidate chained IRQ handler install/remove
Signed-off-by: Olof Johansson <olof@lixom.net>
Init data marked const should be annotated with __initconst for
correctness and not __initdata. In some cases the array gathering
references to that data has to be marked const as well. This fixes
LTO builds that otherwise fail with section mismatch errors.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Second Round of Renesas ARM Based SoC Cleanup for v4.3
* Silence APMU build warnings
* tag 'renesas-cleanup2-for-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: apmu: silence build warnings
Signed-off-by: Olof Johansson <olof@lixom.net>
Merge "drop few more legacy boards for v4.3" from Tony Lindgren:
Drop more omap3 legacy board-*.c files for v4.3. This time we're
dropping the board files for omap3logic and omap3pandora.
The reason for dropping these now rather than later is that now
we can simply revert the patches in case of unexpected issues as
we are not dropping any platform data at this point.
This leaves us with only the following board-*.c files:
BOARD REASON NEEDED
board-ldp.c Still used in RMKs boot test system
board-rx51-*.c Needs /proc/atags support for user space
Once we have the n900 legacy user space issues sorted out for
/proc/atags and system_rev, we can drop the remaining two
board-*.c files. And then one merge window after that we can
drop the legacy booting support assuming no unexpected issues
are found.
* tag 'omap-for-v4.3/legacy-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: Remove legacy booting support for Pandora
ARM: OMAP2+: Remove legacy booting support for LogicPD Torpedo
Signed-off-by: Olof Johansson <olof@lixom.net>
Merge "EP93xx cleanups for v4.3" from Linus Walleij:
EP93xx cleanup and completing developments. This switches
EP93xx to generic time and brings in a few out-of-tree small
patches that were stalled for ages.
It also removes the need for memory config options and instead moves over to
using PATCH_PHYS_VIRT.
* tag 'ep93xx-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM: ep93xx: simone: enable DMA on the SPI host
ARM: ep93xx: vision_ep9307: add audio support
ARM: ep93xx: vision_ep9307: enable DMA for SPI
ARM: ep93xx: toss the device ID into the entropy pool
ARM: ep93xx: remove memory configuration options
ARM: ep93xx: update comment on timer usage
ARM: ep93xx: switch clockevent to timer 3
ARM: ep93xx: use non-raw accessors for timer
ARM: ep93xx: switch to GENERIC_CLOCKEVENTS
ARM: ep93xx: move timer to its own file
Signed-off-by: Olof Johansson <olof@lixom.net>
Merge "Broadcom SoC changes for 4.3 (part 1)" from Florian Fainelli:
This pull request contains two fixes for the Broadcom BCM63xx SMP code:
- Sudeep removes an invalid use of cpu_logical_map() which turned to be a no-op
since we always boot from physical CPU 0 = logical CPU 0
- Florian removes the custom secondary_startup function and replaces it with
the generic one
* tag 'arm-soc/for-4.3/soc' of http://github.com/broadcom/stblinux:
ARM: BCM63xx: Remove custom secondary_startup function
ARM: BCM63xx: fix parameter to of_get_cpu_node in bcm63138_smp_boot_secondary
Signed-off-by: Olof Johansson <olof@lixom.net>
Merge "ARM: mvebu: cleanup changes for v4.3" from Gregory Clement:
mvebu cleanup changes for v4.3 (part #1)
- Use vsprintf %pM extension on orion5x board to format mac address
- Add missing newline at end of messages on pr_warn when CPU Idle on
Armada 38x is disabled
* tag 'mvebu-cleanup-4.3-1' of git://git.infradead.org/linux-mvebu:
ARM: orion5x: Use vsprintf %pM extension
ARM: mvebu: add missing newline at end of messages
Signed-off-by: Olof Johansson <olof@lixom.net>
Merge "ARM: clockevents: Migrate to 'set-state' callbacks" from Viresh Kumar:
This series migrates ARM clockevent drivers (present in arch/arm/
directory), to the new set-state interface. This would enable these
drivers to use new states (like: ONESHOT_STOPPED, etc.) of a clockevent
device (if required), as the set-mode interface is marked obsolete now
and wouldn't be expanded to handle new states.
* 'ARM/clkevt/set-state-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/linux:
ARM/orion/time: Migrate to new 'set-state' interface
ARM/iop/time: Migrate to new 'set-state' interface
ARM/w90x900/time: Migrate to new 'set-state' interface
ARM/SPEAr/time: Migrate to new 'set-state' interface
ARM/omap2/timer: Migrate to new 'set-state' interface
ARM/omap1/timer32: Migrate to new 'set-state' interface
ARM/omap1/time: Migrate to new 'set-state' interface
ARM/netx/time: Migrate to new 'set-state' interface
ARM/mmp/time: Migrate to new 'set-state' interface
ARM/lpc32xx/timer: Migrate to new 'set-state' interface
ARM/ks8695/time: Migrate to new 'set-state' interface
ARM/ixp4xx/timer: Migrate to new 'set-state' interface
ARM/imx/epit: Migrate to new 'set-state' interface
ARM/gemini/time: Migrate to new 'set-state' interface
ARM/dc21285-timer: Migrate to new 'set-state' interface
ARM/davinci/time: Migrate to new 'set-state' interface
ARM/cns3xxx/timer: Migrate to new 'set-state' interface
ARM/smp_twd: Migrate to new 'set-state' interface
Signed-off-by: Olof Johansson <olof@lixom.net>
The SPI host on the SIM.ONE is used for the MMC/SD card and
will badly need this turbo boost.
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Enable the 'use_dma' flag in the SPI platform data to improve the speed
of the mmc_spi driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
It doesn't hurt to add this random stuff into the entropy pool
as is custom to do with device-unique numbers.
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The ARM_PATCH_PHYS_VIRT option makes the ep93xx memory configuration
options obsolete.
This allows support for all the ep93xx variations to be built into a
single kernel.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Migrate orion driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Gregory Clement <gregory.clement@free-electrons.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Migrate iop driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Migrate w90x900 driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Migrate SPEAr driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Also kill the unnecessary forward declaration of set-mode routine by
moving 'struct clock_event_device clkevt' towards the bottom of the file.
Cc: Shiraz Hashim <shiraz.linux.kernel@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Migrate omap2 driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Migrate omap timer32 driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Migrate omap driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Migrate netx driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
We aren't writing zero twice on the control register for shutdown or
resume state now.
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Migrate mmp driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
We weren't doing anything in set_mode(RESUME) except of
local_irq_{save|restore}(), which isn't required and so ->tick_resume
isn't implemented.
Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Migrate lpc32xx driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Roland Stigge <stigge@antcom.de>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Migrate ks8695 driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
There is nothing to be done for oneshot or shutdown states and so are
not implemented.
Acked-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Migrate ixp4xx driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
NOTE: ixp4xx_set_{oneshot|periodic} don't perform read operation on
'IXP4XX_OSRT1' register anymore.
Cc: Imre Kaloz <kaloz@openwrt.org>
Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Migrate imx driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Also drop 'clockevent_mode': It was caching the last state of the
clockevent device. The same behavior can be achieved by using
clockevents state helpers. These helpers are only required for oneshot
mode as shutdown/resume wouldn't be done twice by the core.
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Migrate gemini driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Acked-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Migrate footbridge driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Migrate davinci driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
We weren't doing anything in set_mode(RESUME) and so .tick_resume()
isn't implemented.
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Migrate cns3xxx driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
NOTE: We don't read TIMER1_2_CONTROL_OFFSET register on shutdown
anymore.
Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Migrate smp_twd driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
We've been moving all omap2+ based systems to boot in device tree only
mode for a few years now. Only omap3 has legacy booting support
remaining. Most omap3 boards already have related arch/arm/boot/*.dts*
files for booting with device tree.
This board has support for device tree based booting, and we've been
printing warnings about the legacy booting being deprecated for a
few merge cycles now. Let's attempt to remove the legacy booting
for it.
The reason for removing the legacy booting support now rather than
later is we can simply revert this patch if necessary if we run
into some unexpected issues that are not trivial to fix for the
device tree based booting.
Cc: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Merge "Renesas ARM Based SoC PM Domain Updates for v4.3" from Simon Horman:
* Make rcar_sysc_ch const for r8a779[09] SoCs
* Get rid of on_off_fn() function pointer
* Use BIT() macro instead of open coding
* Make struct rcar_sysc_ch * parameters const
* Break infinite loop
* Shrink rcar_sysc_ch size
* Improve documentation
* tag 'renesas-pm-domain-for-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: r8a7790: Make struct rcar_sysc_ch const
ARM: shmobile: r8a7779: Make struct rcar_sysc_ch const
ARM: shmobile: R-Car: Get rid of on_off_fn() function pointer
ARM: shmobile: R-Car: Use BIT() macro instead of open coding
ARM: shmobile: R-Car: Make struct rcar_sysc_ch * parameters const
ARM: shmobile: R-Car: Break infinite loop
ARM: shmobile: R-Car: Shrink rcar_sysc_ch size
ARM: shmobile: R-Car: Improve documentation
Signed-off-by: Olof Johansson <olof@lixom.net>
Merge "Renesas ARM Based SoC Cleanup for v4.3" from Simon Horman:
* Remove non-multiplatform code from timer
* Remove CONFIG_ARCH_SHMOBILE_MULTI check in setup-rcar-gen2.c
as it is always true
* Remove legacy (non-multiplatform) support for both sh73a0/kzm9g and
r8a7740/armadillo800eva
* Move to_rmobile_pd from header to source file where it is used
* Use BIT() macro instead of open coding in r-mobile PM code
* r8a7779: Remove usage of GENPD_FLAG_PM_CLK flag which has no effect
* tag 'renesas-cleanup-for-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: timer: r8a73a4 and r8a7790 are multi-platform only
ARM: shmobile: R-Car Gen2: CONFIG_ARCH_SHMOBILE_MULTI is always set
ARM: shmobile: Remove obsolete zboot support
ARM: shmobile: R-Mobile: Remove legacy PM Domain code
ARM: shmobile: Remove unused dma-register.h
ARM: shmobile: Remove legacy SoC code for R-Mobile A1
ARM: shmobile: Drop r8a7740-armadillo800eva.dtb for legacy builds
ARM: shmobile: Remove legacy armadillo800eva_defconfig
ARM: shmobile: Remove legacy board code for Armadillo-800 EVA
ARM: shmobile: Remove legacy SoC code for SH-Mobile AG5
ARM: shmobile: Drop sh73a0-kzm9g.dtb for legacy builds
ARM: shmobile: Remove legacy kzm9g_defconfig
ARM: shmobile: Remove legacy board code for KZM-A9-GT
ARM: shmobile: r8a7779: Remove GENPD_FLAG_PM_CLK flag
ARM: shmobile: R-Mobile: Use BIT() macro instead of open coding
ARM: shmobile: R-Mobile: Move to_rmobile_pd from header to source file
Signed-off-by: Olof Johansson <olof@lixom.net>
With shmobile_defconfig but SMP=n && SUSPEND=n, I get:
arch/arm/mach-shmobile/platsmp-apmu.c:49:12: warning: 'apmu_power_off' defined but not used [-Wunused-function]
arch/arm/mach-shmobile/platsmp-apmu.c:70:12: warning: 'apmu_wrap' defined but not used [-Wunused-function]
Annotate those functions like the functions around it.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The irq argument of most interrupt flow handlers is unused or merily
used instead of a local variable. The handlers which need the irq
argument can retrieve the irq number from the irq descriptor.
In this case the irq argument is shadowed by a local variable already,
so just rename it.
Search and update was done with coccinelle and the invaluable help of
Julia Lawall.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Russell King <linux+kernel@arm.linux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
The irq argument of most interrupt flow handlers is unused or merily
used instead of a local variable. The handlers which need the irq
argument can retrieve the irq number from the irq descriptor.
While at it fix the pointless lookup of irq_data with the proper
methods to retrieve the same information from the irq descriptor.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Russell King <linux+kernel@arm.linux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
We've been moving all omap2+ based systems to boot in device tree only
mode for a few years now. Only omap3 has legacy booting support
remaining. Most omap3 boards already have related arch/arm/boot/*.dts*
files for booting with device tree.
This board has support for device tree based booting, and we've been
printing warnings about the legacy booting being deprecated for a
few merge cycles now. Let's attempt to remove the legacy booting
for it.
The reason for removing the legacy booting support now rather than
later is we can simply revert this patch if necessary if we run
into some unexpected issues that are not trivial to fix for the
device tree based booting.
Cc: Tim Nordell <tim.nordell@logicpd.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
